Scribd
Upload
166 views

Coaxial Cable Tutorial

Coaxial cable consists of an inner conductor surrounded by insulating material and an outer conductor. It is commonly used to transmit radio frequency signals. Coaxial cable comes in 50 ohm and 75 ohm variants, with 50 ohm primarily used for data and 75 ohm used for video. Applications include home entertainment, GPS, security cameras, and telecommunications networks.

Uploaded by

محمد المحمدي
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
166 views

Coaxial Cable Tutorial

Coaxial cable consists of an inner conductor surrounded by insulating material and an outer conductor. It is commonly used to transmit radio frequency signals. Coaxial cable comes in 50 ohm and 75 ohm variants, with 50 ohm primarily used for data and 75 ohm used for video. Applications include home entertainment, GPS, security cameras, and telecommunications networks.

Uploaded by

محمد المحمدي
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Coaxial Cable Tutorial

What is Coaxial Cable?


Coaxial cable is a two conductor electrical cable consisting of
a center conductor and an outer conductor with an insulating
spacer between the two.

How is Coaxial Cable used?


Primarily, coaxial cables are used for the transmission of
Radio Frequency energy. The system offers tight control over
electrical impedance. This yields excellent performance at high frequencies and superior EMI
control/shielding.

Where is Coaxial Cable used?


A broad range of applications exist for coaxial cabling. The two primary impedance values of 50
and 75 Ohms determine specific applications with 50 Ohms primarily used in data signal
applications and 75 Ohms used in video signal applications.

Coaxial Cable Terms


Attenuation (Insertion Loss): Loss of power. Attenuation is
usually measured in dB loss per length of cable (ex. 31.0
dB/100Ft.). Attenuation increases as frequency increases.
Bend Radius: The amount of radius a cable can bend without
any adverse effects.
Center Conductor: The solid or stranded wire in the middle of
the coaxial cable. The conductor diameter is measured by the
American Wire Gauge (AWG).
Coaxial Adapter: A device used to change one connector type to another or one gender to
another (ex. BNC to SMA Adapter).
Coaxial Cable: A two conductor cylindrical transmission line typically comprised of a center
conductor, an insulating dielectric material and an outer conductor (shielding). Coaxial cable
can be flexible (typical of L-com assemblies), semi-rigid or rigid in nature.
Coaxial Connector: The interconnection device found at each end of a coaxial cable assembly.
There are many common types of coaxial connectors such as: BNC, SMA, SMB, F, etc.
Dielectric: The insulating material that separates the center conductor and the shielding.
Electromagnetic Interference (EMI): Electrical or electro-magnetic energy that disrupts
electrical signals.
Frequency: The number of times a periodic action occurs in one second. Measured in Hertz.
Impedance: In simple terms, impedance, in a coaxial product, is the measurement of resistance
to the flow of current. The unit of measurement is Ohms.
The following is a more technically correct definition: Transmission line impedance, also known
as characteristic impedance, is the ratio of the amplitudes of a single pair of voltage and current
waves propagating along an infinitely long transmission line with absence of any reflections.
Characteristic impedance measures like resistance when dealing coaxial cable types.
Characteristic impedance is a relationship between the capacitance per unit length and the
inductance per unit length. The inner and outer coaxial diameter ratios and the dielectric
constant in the cable define the parameters involved in determining characteristic impedance.

Insertion Loss: A measurement of attenuation determined by the system output before and
after the connection of a cable and/or device.
Jack: The female connector usually containing a center socket.
Microwave Frequencies: Microwave frequencies range from Ultra-High Frequency (UHF) .3-
3GHz, Super High Frequency (SHF) 3-30GHz to Extremely High Frequency (EHF) 30-300GHz.
MIL-C-17: MIL-C-17 is a specification document that has been used since the 1940s to
standardize the physical and electrical characteristics of coaxial cables. There is no longer any
control of RG specifications so cables may perform differently than the cables that adhere to
MIL-C-17.
Plug: The male connector usually containing a center pin.
RF (Radio Frequency): A frequency band from 3 MHz to 3 GHz. Primarily used for transmission
of radio and television signals.
RG/U: Symbols used to represent coaxial cable that is built to U.S. government specifications
(R=Radio Frequency, G=Government, U=Universal Specification)
Shielding: Conductive envelope made of wires or metal foil that covers the dielectric and the
center conductor
Twinaxial: An offshoot from coaxial cabling. Two center conductors with one dielectric and
braided shielding.
Velocity of Propagation (VP): Usually expressed as a percentage, VP is the transmission speed
of electrical energy in a determined length of cable compared to the speed of light.
VSWR (Voltage Standing Wave Ratio): The ratio of the maximum effective voltage to the
minimum effective voltage measured along a RF transmission line. This value generally
increases with frequency and higher values are not desirable.
Common Applications for Coax Cable
Assemblies

Home
Entertainment GPS Security Video Telecommunications WAN/LAN
Coaxial cable assemblies Global Positioning Systems The transmission of a The infrastructure of many Wide Area Networks and
are used extensively to utilize 50 Ohm coaxial video image from a telecommunications systems Local Area Networks often
inter-connect a wide cable for connections security camera to a relies heavily on 50 Ohm coaxial utilize 50 Ohm coaxial
variety of Home between receiving display monitor is often cable for a multitude of cable for equipment
Entertainment equipment antennas and other the job of a 75 Ohm interconnection applications. Cell interconnection. In many
such as TV's, DVR's, VCR's related equipment. coaxial cable such as towers and communication of the numerous
CATV or Satellite RG174, RG188 or RG316 RG59A/U, RG59B/U or equipment in base station interconnection
Receivers. Generally are often used with SMA, RG179, most often with facilities are a few typical applications of these
speaking 75 Ohm coaxial MCX or MMCX connectors. BNC connectors. Bundled examples. In these applications networks you will find
cable such as RG6 or RG59 In addition, RG58 with TNC assemblies with multiple RG58, RG223 and RG213 cable RG58 and RG174 are two
is used to carry Audio and and Type N connectors is 75 Ohm cables are often with BNC, TNC and Type N common cable types. BNC
Video signals. Connectors used for remote antenna used to connect multi- connectors are often utilized. interface connectors are
commonly used are BNC, feeds. camera setups. the most common
Type F and RCA. connector types used in
these situations. In
addition reverse polarized
connectors are found on
many wireless antenna
interfaces.

Frequency Band Data


Coaxial products are generally intended for use in the RF frequency band as illustrated here.
Typical Coaxial Cable Typical Coaxial Connector
(Exploded View): (BNC Exploded View):

Understanding Coaxial Cable


Shielding Effectiveness is the relative ability of a shield to screen out undesirable interference.
In the case of a coaxial cable, the outer conductor provides a shield to keep interfering signals
from getting in and to keep signal from leaking out to become undesirable interference for
nearby devices. Shielding Effectiveness is measured in dB with higher values indicating better
shielding properties.

The table below illustrates the relative shielding properties of various shielding types. Notice as
the shielding density increases there is a correlated increase in the shielding effectiveness
value. The best shielding effectiveness value can be found in a rigid coaxial cable due to the
solid tube construction of the outer jacket. In this type of cable the limiting factor for shielding
effectiveness is the quality of the connector attachment.

You might also like