Scribd
Upload
67 views2 pages

16.050 Thermal Energy: Page 1 of 2

This document contains three thermodynamics problems involving cycles and processes. 1. A reversible cycle with temperatures from 300K to 600K and entropies from 300 kJ/K to 600 kJ/K. The net work, heat rejection path, and efficiency are calculated. 2. An insulated device with air entering and exiting at different locations is analyzed to determine flow direction and power based on mass flow rate, temperatures, and specific heat. 3. A throttling valve and turbine in parallel are analyzed using a T-S diagram. Properties like pressure, temperature, mass flow rates, and power are determined through the processes.

Uploaded by

ZeroReco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
67 views2 pages

16.050 Thermal Energy: Page 1 of 2

This document contains three thermodynamics problems involving cycles and processes. 1. A reversible cycle with temperatures from 300K to 600K and entropies from 300 kJ/K to 600 kJ/K. The net work, heat rejection path, and efficiency are calculated. 2. An insulated device with air entering and exiting at different locations is analyzed to determine flow direction and power based on mass flow rate, temperatures, and specific heat. 3. A throttling valve and turbine in parallel are analyzed using a T-S diagram. Properties like pressure, temperature, mass flow rates, and power are determined through the processes.

Uploaded by

ZeroReco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

16.

050 Thermal Energy Quiz #1 – Fall 2002

Do all three problems. All problems count the same.

1. A reversible cycle plots as a perfect circle on a T-S diagram with maximum and
minimum temperatures 600 K and 300 K and a maximum and minimum entropy of
600 kJ/K and 300 kJ/K.

a) What is the net work of this cycle?


b) Indicate the path in the cycle along which heat is rejected. How do you
know? (A sentence or two is required, perhaps bolstered by an equation).
c) What is the thermodynamic efficiency of this cycle?

2. The following device operates at steady-state and is well insulated. Air enters at one
location and exits at another with a mass flow rate of 10 kg/s. Assuming ideal gas
behavior and negligible potential energy effects, determine the direction of the air
flow and the direction of the power flow. Determine the power in kW. Assume
cp=1000 J/kgK for air. (Hint: it might be useful to initially assume directions of the
different energy fluxes and then to check for consistency.)

Page 1 of 2
3. The figure below shows a throttling valve in parallel with a turbine having an
isentropic efficiency of 90%. Both turbine and throttle operate at steady state and
heat transfer with the surroundings and kinetic and potential energy effects can be
neglected. You may assume the working fluid has a constant cp=1 kJ/kgK and a
ratio of specific heats of γ=1.4.

Inlet: Inlet: Outlet:


45 bar 45 bar 15 bar
650 K 650 K 500 K
10 kg/s

a) Sketch the throttling process from state 1 to state 2 in a T-s diagram. Indicate the
curves of pressures p1 and p2 in the diagram.
b) Determine the pressure drop ∆p = p1 – p2 across the throttle and the temperature
at throttle exit T2.
c) Sketch the expansion through the turbine on the same T-s diagram and indicate
the curve of pressure p3.
d) Determine the temperature at the turbine exit T3.
e) Sketch processes 3 to 4 and 2 to 4 in the same T-s diagram. Explain in a sentence
or two what happens during these processes.
f) What is the mass flow rate through the turbine in kg/s? (Hint: you may want to
define an appropriate control volume that includes the turbine exit flow, the
throttle exit flow and the flow at the system outlet.)
g) What is the power developed by the turbine?

Page 2 of 2

You might also like