CISBO

Parking sensor

CISBO RADER SYSTEM USER’S MANUAL

 Index
! TO USER --------------------------------------------------------------1
! PART AND TECH DATA---------------------------------------------2
! DISPLAY AND ALARM SOUND-----------------------------------3
! INSTALLATION FOR 2&4 SENSORS-----------------------------4
! INSTALLATION FOR 6&8 SENSORS-----------------------------5
! INSTALLATION FOR WIRELESS TYPE--------------------------6
! INSTALLATION FOR VIDEO TYPE-------------------------------7
! INSTALLATION FOR REARVIEW MIRROR TYPE-------------8
! POSITION FOR EACH PART------------------------- --------------9
! DISPLAY & MAIN BOX INSTALLATION DIAGRAM----------10
! SENSORS INSTALLATION DIAGRAM--------------------------11
! NOTICE FOR USER-------------------------------------------------12
! FUNCTIONS FOR LED DISPLAY SERIES-----------------------13
! FUNCTIONS FOR LCD DISPLAY SERIES-----------------------14
! FUNCTIONS FOR REARVIEW MIRROR SERIES---- ----------15
! FUNCTIONS FOR VIDEO DISPLAY SERIES--------------------16
! GUARANTEE FORM -----------------------------------------------17
 TO USER
Thank you for choosing and using our Parking Sensor products. We
are going to provide you with the best products and the best services. In
order to insure the best performance and avoid any false alarm or
function failure, we strongly suggest that you read this user's manual
carefully before installation and use.
Parking Sensor System is a high technology product. It adopts
ultrasonic wave sensors to measure the distance between your car and
the obstacles, and remind the driver of safe distance accurately when
reversing a car.
We reserve all rights for our Parking Sensor products, including the
designs and the software. Any unauthorized copy or translation is
prohibited. And the content of the user's manual will be updated
according to the update of the products, if it is subjected to change,
without notification. At last, the final explanation rights of this user's
manual is reserved by us.

CISBO RADER SYSTEM USER’S MANUAL

 PART
1. Display: Back vision display, distance numeric display, buzzer alarm circuit , etc ,
normally set inside the driving room.
2. Control unit: MCU control circuit, normally set inside the trunk, nearby the
backup lights.
3. Sensor: .Ultrasonic sensor "electronic eye", is the transmisson center for detecting
signals and normally set at the rear or front of bumper.
4.Camera: input the video signal, normally be set in the rear bumper.
5. Mobile phone hands free system: Be set inside the rear view mirror, connected with
the mobile, bring convenience and safety during circumstance.

TECH DATA
1. Rated voltage : DC12V (24v available)
2. Power : 3.6W
3. Working temperature: -20 C---70 C
4. Detecting distance: 0.3-2.0M
5. Detecting angle: H>60 ,V>60
6. Radio frequency: 315MHz/433MHz
7. Camera angle: 92 or 120

2 CISBO RADER SYSTEM USER’S MANUAL

DISPLAY

LED DISPLAY LED DISPLAY LED DISPLAY WITH HANDFREE

LCD DISPLAY LCD DISPLAY TFT LCD MONITOR

ALARM SOUND

Stage Distance Awareness Alarm Display

1 200-160cm safe mode NO 2.0-1.6
2 150-100cm safe mode Bi----Bi----Bi 1.5-1.0
3 90-50cm alarm mode Bi--Bi--Bi 0.9-0.5
4 40-30cm alarm mode Bi-Bi-Bi 0.4-0.3
5 0-20cm danger mode Bi------------ 0.0

CISBO RADER SYSTEM USER’S MANUAL 3

INSTALLATION FOR 2 & 4 SENSORS
1. This diagram only for 2 and
4 back sensors.
2. The system begin to work
MAIN BOX while the car on reversing
time.
3. The display such as LED
display, LCD display, only
+12v

GND
YELLOW 12v

Buzzer, rear view mirror,

SENSOR C

SENSOR D
SENSOR A

SENSOR B
detail see Page 3.
BLACK
RED

4. The sensors will be on

flashing while the car on
Reversing Stop brake time if the system be
light light 4 SENSORS
(Only for lliuminant sensor)
Matched the illuminant sensor..
5.Power line guide:
Reversing light: Power on
DISPLAY
2 SENSORS
while the car on reversing
time.
INSTALL ON THE BACK BUMPER
Stop light: power on while
brake.

CISBO RADER SYSTEM USER’S MANUAL

INSTALLATION FOR 6 & 8 SENSORS
INSTALL ON THE FRONT BUMPER
1. This diagram only for 6 and
8 sensors(Front and back).
2. The front sensors begin to
work while the car onbrake
Time.

SENSOR H
SENSOR G
SENSOR E

SENSOR F
3. The back sensors begin
work while the car on
MAIN BOX
Reversing time.
4. The display such as LED
display, LCD display, only
Buzzer, rear view mirror,
YELLOW 12v

GND
RED +12v

detail see Page3.

BLACK

5.Power line guide:

SENSOR D
SENSOR C
SENSOR A

SENSOR B

Reversing light: Power on

Reversing Stop
light light
while the car on reversing
time.
4 SENSORS
Stop light: power on while
INSTALL ON THE BACK BUMPER
DISPLAY
brake.

CISBO RADER SYSTEM USER’S MANUAL

INSTALLATION FOR WIRELESS TYPE
1. This diagram only for
wireless parking sensor.
2. The back sensors begin to
work while the car on
reversing time.
MAIN BOX DISPLAY
3.the sensors will be on
flashing while the car on
brake time if the system be

SENSOR C

SENSOR D
SENSOR A

SENSOR B
matched the illuminant
YELLOW 12v

GND
RED +12v

Sensor.

TO CIGARETTE JACK +12V

4. The display such as LED
BLACK

4 SENSORS display, LCD display, only

Reversing Stop
light
Buzzer, rear view mirror,
light
(Only for lliuminant sensor) detail see Page 3.
2 SENSORS 5.Power line guide:
INSTALL ON THE BACK BUMPER Reversing light: Power on
while the car on reversing
time.
Stop light: power on while
brake.

CISBO RADER SYSTEM USER’S MANUAL

INSTALLATION FOR VIDEO TYPE
1. This diagram only for the
parking sensor with camera.
2. When the car on reversing ,
the back sensors and
camera are working.

SENSOR C
3.The imagine will display on

SENSOR A

SENSOR D
SENSOR B
the external TFT screen,
GND
TO CAMERA
TO CAMERA
RED +12v

YELLOW VIDEO

WHITE BUZZER
DC PLUG

while the distance will

BLACK

4 SENSORS
display as well.
4. The display is used for car
Reversing
light DVD/VCD.
2 SENSORS 5.Power line guide:
INSTALL ON THE BACK BUMPER
Reversing light: Power on
BUZZER
while the car on reversing
time.
Stop light: power on while
brake.
Camera
INSTALL ON THE BACK BUMPER TFT Screen (optional)

CISBO RADER SYSTEM USER’S MANUAL

INSTALLATION FOR REARVIEW MIRROR TYPE
1. This diagram only for 4 in 1
MAIN BOX or 6 in 1 parking sensor
2. The back sensors begin to
work while the car on

BLACK GND
YELLOW 12v
RED +12v

reversing time.

SENSOR D
SENSOR C
SENSOR A

SENSOR B
3.the sensors will be on
Reversing Stop
flashing while the car on
4 SENSORS
light light
(Only for lliuminant sensor)
INSTALL ON THE brake time if the system be
BACK BUMPER
2 SENSORS
matched the illuminant
sensor.
4. The function see detail
Page 15.
DISPLAY
5. The display clip on the
original rearview mirror.
6.Power line guide:
Reversing light: Power on
MOBILE PHONE
while the car on reversing
TO CIGARETTE JACK +12V
Time.
Stop light: power on while
brake.

CISBO RADER SYSTEM USER’S MANUAL

POSITION FOR EACH PART
POSITION GUIDE:
1. 4 back sensors: Back
bumper.
8. 4 front sensors
5. TFT LCD SCREEN 2. Camera: middle of the
6. Hands free car kit rear view mirror back bumper.
7. D Isplay
3.buzzer:back side of back
seat.
4. Main box: Back chest.
5.TFT LCD screen: amount
4. Parking sensors
the sunshade board or stand
main box on the front board.
3. Buzzer
6. Hands free rear view mirror:
Clip on the original rearview
mirror.
2. Camera
7. Display: Stand on the front
board.
1. 4 back sensors 8.4 front sensor: front bumper.

CISBO RADER SYSTEM USER’S MANUAL

DISPLAY INSTALLATION DIAGRAM

Clean the installation position Tear the 3M paster of display Install the display The cord should be invisible

MAIN BOX INSTALLATION DIAGRAM

Locate the main box in the Lay the wires snugy to avoid
rear boot at a place safe away ugly outlooking
from rain,heat or humidity

CISBO RADER SYSTEM USER’S MANUAL

SENSORS INSTALLATION DIAGRAM

Bumper

Sensor

Bumper Driller Side vision

4 sonsors

Stick on

Insert in

CISBO RADER SYSTEM USER’S MANUAL

NOTICE FOR USER
1.Follwing situation will weaken the detectou effect

Smooth slope Smooth round object Cotton kind barrier Rainstorm

2.simple service
Trouble Trouble from Resolvent
Parking sensor doesn’t work 1.Power line connected wrong 1. Connected the red line to +12V
2.Jack connected wrong 2.Check each jack put the right socket

Power light on the light state, Sensor jack connected wrong

it still doesn’t work Sensor can’t work Re-connect sensor jack

display the same number

Sensor detect car body or ground Adjust the sensor position and angle
again and again

1. Jack connected wrong 1.Power off,then refresh all jack

Display the wrong number 2.Sensor line may be damaged 2.Check the sensor line, be sure it doesn’t
be closed with vent-pipe or silencer

CISBO RADER SYSTEM USER’S MANUAL

FUNCTIONS FOR LED DISPLAY SERIES
1. L ED display :It is for model such as: SB303(F) ,SB305,SB306(F).SB323(F)
2. Digital LED showing obstacle distance
3. Alarm by three step Bi-Bi sound
4. LED display with two side indicate.
5. Crescent shape digital display screen
6. 2 4 6 8 sensors are available.
7. Insert in Stick on illuminate sensors are available.
8. If no need the LED display, there are Buzzer only can be replaced
1.Indicate left-- When the back left sensor detect the obstacle, it will
glitter.
2.Indicate right- When the back right sensor detect the obstacle, it will
glitter.
3. Distance-Display the latest the distance for all sensors.
3. Distance

2. Indicate left
1. Indicate right

CISBO RADER SYSTEM USER’S MANUAL 13

FUNCTIONS FOR LCD DISPLAY SERIES
1. L CD display :It is for model such as: SB308(F) ,SB309(F)
2. Digital LCD showing obstacle distance
3. Alarm by three step Bi-Bi sound
4. Colourized LCD screen or blue colour background
5. The simulative vehicle is displayed in the colourized screen
6. 2 4 6 8 sensors are available.
7. Insert in Stick on illuminate sensors are available.
1.Indicate back right- When the back right sensor detect the obstacle, it
will glitter.
2.Indicate back left- When the back left sensor detect the obstacle, it will
glitter.
5.Indicate front-right 3.Simulate car-When reversing the car, it will show on the screen.
4.Indicate front-left 10.Background 4.Indicate front left- When the front left sensor detect the obstacle, it will
9.Distance glitter.
3.Simulate car 8.Voice switch 5.Indicate front right- When the front right sensor detect the obstacle, it
7.Simulate bar will glitter.
2.Indicate back-left 6.Bracket-You can turn over the screen .
7. Simulate bar- When the obstacle is closer, the bar will more and more.
1. Indicate back-right 6.Bracket 8.Voice switch- Turn on/off the voice.
9. Distance-Display the latest the distance for all sensors.
10. Background- Blue background.

14 CISBO RADER SYSTEM USER’S MANUAL

FUNCTIONS FOR REARVIEW DISPLAY SERIES
1. L ED display :It is for model such as: SB808(F) ,SB818(F)
2. Digital LED showing obstacle distance
3. Alarm by three step Bi-Bi sound
4. Rear view mirror with Guarding against dizzy light and fog function
5. Hans free car kit
6. With Record, play, mute function
7. 2 4 6 8 sensors are available.
8. Insert in Stick on illuminate sensors are available.
1.Mic - Used to receive voice from user.
10.Signal input jack 14.Indicate left 2.Volume Control- Used to control the speaker volume level.
A echo adjustor 3.ON/OFF-ppower On and Off. When ON/OFF LED lit, the system is
13.Distance
work.
9.Power input jack 12.Indicate right
4Standby - For some mobile phone system, you can press Standby button
Mic volume adjustor 11.Speaker
to receive your call(for CDMA system only).
5.Earphone Output jack- For private listening of the call.
6.Record Button- Used to record message.
7.Play Button- Used to play back all recorded message.
8.Mute Button- Used to turn off the microphone of MOBILE MIRROR .
9.Power Input Jack - Accepts input plug from car power cord.
10.Hand Free Input Jack - Accepts input plug from hand free cord .
11.Speaker- the phone voice will be directed through this Speaker.
1. Mic 8.Mute 12.Indicate right- When the back right sensor detect the obstacle, it will
2. Volume control 7.Play light.
3.ON/OFF 6.Record
4.Stand by 5.Earphone jack 13.Distance- Display the latest the distance for all sensors.
14.Indicate left- When the back left sensor detect the obstacle, it will
light.

CISBO RADER SYSTEM USER’S MANUAL 15

FUNCTIONS FOR VIDEO DISPLAY SERIES
1. TFT LCD display :It is for model: SB838(F) ,SB868(F)
2. TFT LCD displays the practical image behind your car when reversing
3. Two series numbers display the distances
4. Alarm by three step Bi-Bi sound
5. The simulative vehicle is displayed in the colourized screen
6. 2 4 sensors are available.
7. With camera.
8. Insert in Stick on illuminate sensors are available.
1.Image- Display the rear image by Camera
2.left distance- display the obstacle distance for back left 2 sensors
1.Image 3.simulate Bar -Indicate the back-left sensor working state, When the
2. Left distance 7.Right distance
obstacle is closer, the bar will more and more.
4.simulate Bar -Indicate the back-left-middle sensor working state,
When the obstacle is closer, the bar will more and more.
5.simulate Bar -Indicate the back-right-middle sensor working state,
When the obstacle is closer, the bar will more and more.
6.simulate Bar -Indicate the back-right sensor working state, When the
obstacle is closer, the bar will more and more.
7.Right distance- display the obstacle distance for back right 2 sensors

3.Simulate Bar 6.Simulate Bar

4.Simulate Bar 5.Simulate Bar

16 CISBO RADER SYSTEM USER’S MANUAL

GUARANTEE FORM CISBO
GUARANTEE FORM

Model Number Stamp/signature of dealer:

Date of purchase:

Customer’s name

Telephone

Car registration Number

Note:
1.Guarantee time:12months.
2.The guarantee will be effedtive with the stamp/sugnature of
the dealer.
3.Please keep the guarantee form well to ensure 12 months
guarantee.

CISBO RADER SYSTEM USER’S MANUAL 17