Scribd
Upload
14 views

Design of Isolated Foundation - 55

The document discusses calculations for load, moment, bearing pressure and stability checks of a footing. It provides equations and values for total load, moment at the base, maximum and minimum bearing pressures, and load combinations for stability checks under different limit states.

Uploaded by

Srinivasa Rao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
14 views

Design of Isolated Foundation - 55

The document discusses calculations for load, moment, bearing pressure and stability checks of a footing. It provides equations and values for total load, moment at the base, maximum and minimum bearing pressures, and load combinations for stability checks under different limit states.

Uploaded by

Srinivasa Rao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

P,total = 497.566 +44.55+ 14.07 + 122.

45
Moment at footing base 'M' = M+ H x Height of pedestal
Total Load on Footing = Vertical Load + pedestal (P) + Wt of footing + Wt of soil
P,total = 497.566 +44.55+ 14.07 + 122.45
Moment at footing base 'M' = M+ H x Height of pedestal
Mx = 0+1.257*2.8
Mz = 0+ 11.971*2.8

Total Load on Footing = Vertical Load + pedestal (P) + Wt of footing + Wt of soil


P,total = 497.566 +44.55+ 14.07 + 122.45
Moment at footing base 'M' = M+ H x Height of pedestal
Mx = 0+1.257*2.8
Mz = 0+ 11.971*2.8

a) Bearing Pressure Check P Mz Mx


Pressure   
A Zz Zx

Pmax= (597.62 / 3.24) + (33.52 / 0.972) + (3.52 / 0.972) Pmax = 222.556 kN/m2
Modification not required. Since P_min>0. Pmin = 146.345 kN/m2
Pressure calculation as per Teng's chart.
ex/L = Mz/P/L = 0.04
ez/L = Mx/P/B = 0.01
k= 1.30 (Refer Teng's Chart)
Maximum Pressure = k x P/A
Maximum Pressure = 239.786 kN/m2 Pmax_mod=222.556 kN/m2

Allowable Gross SBC for LC502 = 202.5 kN/m2

b) Stability Checks
Water Table effect to be considered ?
StabilityCheck (Serviceability load combination) @ 27
Condition Ver. Load Lat. Load ("H" in kN) Mom. ("M" in kNm)
LC Description
(L/S)* ("P"in kN) Along X Along Z About X About Z
1.1G + 0.3Q1 + 1.0Q3 + 1.0Q4 + 0.3Q5 + 0.5C1
520 L 459.19 12.64 0.31 0.00 0.00
+ 0.5C2 + 1.0T2

Wt of Foundation = [1.8 x 1.8 x 0.55 ] x 25


Wt of pedestal+socket= (0.5)x(0.5)x(2.25)x25
Weight of overburden soil = (1.8 x 1.8 - 0.5 x0.5) x (0--2.5-0.55) x 21
Total Load on Footing = Load from Col.+socket and pedestal (P) + Wt of footing + Wt of soil
P,total = 459.194 +44.55+ 14.07 + 122.45 = 640.248 kN
Moment at footing base 'M' = M+ H x Height of pedestal
Mx = 0+0.31*2.8 = 0.868 kN-m
Mz = 0+ 12.643*2.8 = 35.4004 kN-m
2

You might also like