Scribd
Upload
30 views

Alpha Test Result

This document summarizes test results for a cement sample from CMC RMC Co., Ltd. dated July 27, 2020. The tests show the cement has a fineness of 3%, normal consistency of 26.52%, and initial and final setting times of 1 hour 35 minutes and 3 hours 21 minutes respectively. Compressive strength tests at 3, 7, and 28 days showed average results of 3525 PSI, 5317 PSI, and 5806 PSI. All test results were within ASTM specifications.

Uploaded by

Aung Naing Latt Aung
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
30 views

Alpha Test Result

This document summarizes test results for a cement sample from CMC RMC Co., Ltd. dated July 27, 2020. The tests show the cement has a fineness of 3%, normal consistency of 26.52%, and initial and final setting times of 1 hour 35 minutes and 3 hours 21 minutes respectively. Compressive strength tests at 3, 7, and 28 days showed average results of 3525 PSI, 5317 PSI, and 5806 PSI. All test results were within ASTM specifications.

Uploaded by

Aung Naing Latt Aung
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Sample No:ALPHA Premier Portland Cement, Product of Myanmar.

Specimen: A Date: 27-7-2020


Company Name: CMC RMC Co., Ltd. Sr. No: MES-QC-00719

Project: Test for Use

No Name of Tests* Test Results Remarks

1 Fineness(%) 3% OK
2 Normal Consistency(%) 26.52% OK
,,
,) Setting Time (hr)
(a) Initial (01 hr 35 minute) OK
(b) Final (03 hr 21 minute) OK
~-
2
4 Compressive Strength (lb/in )

(a) 3 days (Cube) Average of 3 : 3525 PSI

(b) 7 days (Cube) Average of 3 : 5317 PSI

(b) 28 days (Cube) Average of 3 : 5806 PSI


Note:
All Test Conducted According to ASTM:ClS0-92
ASTM Specification
Initial Setting Time :The initial setting time shall not be less than 60 minute.
Final Setting Time :The final setting time shall not be more than 10 hours.
28 Days Compressive Strength : Minimum 4000 PSI
Fineness of Cement : Not more than 10 %
Soundness :The Soundness shall not be Less than 10 mm.
Approved by lab Consultant"

Myint Soe SanKyu


...........
M.E (Petro-Engg;) f7-:-:__ B.E (Civil). M.Engg (Structure)
~\' 1\:1 \. "&j

(CEO) HvT-MES ~ ~. ·~ ,.; • M.ASCE, AER, FM-MES, PE (Construction)


.......~ill"...
Tested by

~
MyintTun
Lab Technician
MESQC Lab

You might also like