Scribd
Upload
33 views

SMD29130CC

The document describes a tack flux product in a 30cc syringe that is ideal for rework, soldering, and reflow applications. It is a no-clean synthetic flux that has a long stencil life and clear residue. The flux is RoHS 3 and REACH compliant and has a shelf life of over 24 months when refrigerated or unrefrigerated.

Uploaded by

zoki
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
33 views

SMD29130CC

The document describes a tack flux product in a 30cc syringe that is ideal for rework, soldering, and reflow applications. It is a no-clean synthetic flux that has a long stencil life and clear residue. The flux is RoHS 3 and REACH compliant and has a shelf life of over 24 months when refrigerated or unrefrigerated.

Uploaded by

zoki
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SMD29130CC

Datasheet revision 1.2 www.chipquik.com

Tack Flux No-Clean in 30cc Syringe

Product Highlights
Ideal for all rework, solder, de-solder and reflow applications
Non-corrosive, non-conductive, no-clean
Tack flux will not run all over PCB when applied
Has a pleasant odor
Excellent wetting
Easily cleaned with isopropyl alcohol (IPA)
Attachment of BGA spheres
Soldering flip chip components
Long stencil life
Wide process window
Clear residue
Can be used with Leaded and Lead-Free applications
RoHS 3 and REACH compliant

Specifications
Flux Type: Synthetic No-Clean (for Leaded and Lead-Free applications)
Flux Classification: REL0
Flux Activation Temperature: 140°C (284°F)
Packaging: 30cc/30g Syringe
Shelf Life: Refrigerated >24 months, Unrefrigerated >24 months

Stencil Life
>8 hours @ 20-50% RH 22-28°C (72-82°F)
>4 hours @ 50-70% RH 22-28°C (72-82°F)

Stencil Cleaning
Automated stencil cleaning systems for both stencil and misprinted boards. Manual cleaning using isopropyl alcohol (IPA).

Storage and Handling


Store refrigerated or at room temperature 3-25°C (37-77°F). Do not freeze. Allow 4 hours for flux to reach an operating
temperature of 20-25°C (68-77°F) before use.

Transportation
This product has no shipping restrictions. Shipping below 0°C (32°F) or above 25°C (77°F) for normal transit times by ground
or air will not impact this product’s stated shelf life.

Conforms to the following Industry Standards:


J-STD-004B, Amendment 1 (Solder Fluxes): Yes
RoHS 3 Directive (EU) 2015/863: Yes

1 © 1994-2020 Chip Quik® Inc.

You might also like