Scribd
Upload
70 views

Pipe Support 1of 5

Uploaded by

Anonymous fLgaidVBhz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
70 views

Pipe Support 1of 5

Uploaded by

Anonymous fLgaidVBhz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056

Volume: 05 Issue: 04 | Apr-2018 www.irjet.net p-ISSN: 2395-0072

DESIGN OF THE SUPPORT STRUCTURE FOR THE PIPE LINE SYSTEM


DOREDLA NAGARAJU 1, BHUKYA PRATHIMA BAI 2, CHILUKURI TRIPURA REDDY 3,
TADIKAMALLA NARENDRA 4, K.SIVA REDDY5

1ASSISTANT PROFESSOR, DEPARTMENT OF CIVIL ENGINEERING, NARASARAOPETA ENGINEERING COLLEGE,


NARASARAOPET, INDIA
2,3,4 UG STUDENT, DEPARTMENT OF CIVIL ENGINEERING, NARASARAOPETA ENGINEERING COLLEGE,

NARASARAOPET, INDIA
---------------------------------------------------------------------***---------------------------------------------------------------------
Abstract: This study has been undertaken to investigate the Isolated footings can have different shapes in plan; generally,
determinants of Design of Support structure in Santhi Nagar it depends upon the shape of cross section of the column.
near Narasaraopeta using IS 456:2000. The design code for
the manufacturing of DI K7 pipes which are to be used for the
design of the proposed support structure by using IS 456:200
and Working stress method. To design the support structure,
the design requirements to be considered from the existing site
conditions and the parameters that are required to be
followed for the design water flow and to make the structure
to withstand the loads & forces carried by the supports and the
footings .the design was undergone with manual calculations
by using standard design practices and this was under the
AMRUT scheme prestigiously carried out by the Government of
INDIA.

Key Words: water demand, pedestal, footing, working


stress method, limit state method, Support structure.
1. Introduction 2. OBJECTIVES FOR THE STUDY

1.1.Pipes for Water Supply System 1) To prepare a design of a new water pipe line system
by using design standards.
Pipes which are commonly used in water supply system are 2) To select pipe material and pipe size according to
given below. design standards.

1. Galvanized Iron (GI) Pipes 3. RESEARCH METHODOLOGY


2. Concrete Pipes
Data:
Galvanized Iron (GI) Pipes:
Inner dia of pipe ID 600 mm
This type of pipe is used for water supply work inside the
Thickness of inlining 12 mm
building. These pipes are wrought steel pipes provided with
zinc coating. They are available in light, medium and heavy Thickness of pipe shell 6 mm
grades depending on the thickness of the metal. For a 15 mm Thickness of gunniting
ng 12 mm
GI pipe, the thicknesses are 2.0, 2.65 & 3.25 for the light,
medium and heavy grades, respectively. Generally the Outer dia of the pipe OD 660 mm
medium grade pipes are used for internal plumbing in As per IS 2062-2006,
building. Mostly screw and socket joints are used for G.I.
min.yield stress for welded pipe, fy 2500 ksc
pipes.
Unit weight of steel 7850 kg/m3
Concrete Pipes: Unit weight for internal cement mortar lining
2200 kg/m3
Unreinforced pipes of small diameters as well as reinforced
and prestressed concrete pipes of large diameters are
Unit weight
gh of water
available for water supply and other uses. Small
1000 kg/m3
unreinforced concrete pipes are very much used for drainage
of rain water. Large diameter pipes are generally used for Maximum internal pressure
major water supply works. 0.17 Mpa

© 2018, IRJET | Impact Factor value: 6.171 | ISO 9001:2008 Certified Journal | Page 1912

You might also like