SIMATIC S7 S7-1200 Programmable controller

SM 1232 analog output module specifications

SM 1232 analog output module specifications

Table 1 General specifications

Technical data SM 1232 AQ 2 x 14 bit SM 1232 AQ 4 x 14 bit

Order number 6ES7 232-4HB32-0XB0 6ES7 232-4HD32-0XB0

Dimensions W x H x D (mm) 45 x 100 x 75 45 x 100 x 75

Weight 180 grams 180 grams

Power dissipation 1.8 W 2.0 W

Current consumption (SM Bus) 80 mA 80 mA

Current consumption (24 VDC) 45 mA (no load) 45 mA (no load)

Table 2 Analog outputs

Technical data SM 1232 AQ 2 x 14 bit SM 1232 AQ 4 x 14 bit

Number of outputs 2 4

Type Voltage or current Voltage or current

Range ±10 V, 0 to 20 mA, or 4 mA to 20 mA ±10 V, 0 to 20 mA, or 4 mA to 20 mA

Resolution Voltage: 14 bits Voltage: 14 bits

Current: 13 bits Current: 13 bits

Full scale range (data word) Voltage: -27,648 to 27,648 ; Current: 0 to 27,648
Refer to the output ranges for voltage and current.

Accuracy (25 °C / -20 to 60 °C) ±0.3% / ±0.6% of full scale

Settling time (95% of new value) Voltage: 300 μS (R), 750 μS (1 uF)
Current: 600 μS (1 mH), 2 ms (10 mH)

Load impedance Voltage: ≥ 1000 Ω

Current: ≤ 600 Ω

Behavior on RUN to STOP Last value or substitute value (default value 0)

Isolation (field side to logic) none

Cable length (meters) 100 m twisted and shielded

Table 3 Diagnostics
Technical data SM 1232 AQ 2 x 14 bit SM 1232 AQ 4 x 14 bit

Overflow/underflow Yes Yes

Short to ground (voltage mode only) Yes Yes

Wire break (current mode only) Yes Yes

24 VDC low voltage Yes Yes

Este documento es un extracto gratuito, compilado por el propio usuario, de la documentación ofrecida por Siemens para este producto. Se declina cualquier responsabilidad sobre
la integridad de este documento. Esta previsto exclusivamente para fines propios e internos del usuario. No se permite su entrega a terceros.
9/29/2020
SIMATIC S7 S7-1200 Programmable controller
SM 1232 analog output module specifications

Table 4 Wiring diagrams for the analog output SMs

SM 1232 AQ 2 x 14 bit (6ES7 232-4HB32-0XB0) SM 1232 AQ 4 x 14 bit (6ES7 232-4HD32-0XB0)

Note: Connectors must be gold. See Appendix C, Spare Parts for order number.

Table 5 Connector pin locations for SM 1232 AQ 2 x 14 bit (6ES7 232-4HB32-0XB0)

Pin X10 (gold) X11 (gold)

1 L+ / 24 VDC No connection

2 M / 24 VDC No connection

3 GND No connection

4 No connection AQ 0M

5 No connection AQ 0

6 No connection AQ 1M

7 No connection AQ 1

Table 6 Connector pin locations for SM 1232 AQ 4 x 14 bit (6ES7 232-4HD32-0XB0)

Pin X10 (gold) X11 (gold) X12 (gold) X13 (gold)

1 L+ / 24 VDC No connection No connection No connection

2 M / 24 VDC No connection No connection No connection

3 GND No connection No connection No connection

4 No connection No connection AQ 0M AQ 2M

Este documento es un extracto gratuito, compilado por el propio usuario, de la documentación ofrecida por Siemens para este producto. Se declina cualquier responsabilidad sobre
la integridad de este documento. Esta previsto exclusivamente para fines propios e internos del usuario. No se permite su entrega a terceros.
9/29/2020
 SIMATIC S7 S7-1200 Programmable controller
SM 1232 analog output module specifications

Pin X10 (gold) X11 (gold) X12 (gold) X13 (gold)

5 No connection No connection AQ 0 AQ 2

6 No connection No connection AQ 1M AQ 3M

7 No connection No connection AQ 1 AIQ 3

See also
→ Measurement ranges of the analog outputs for voltage and current (SB and SM)

Este documento es un extracto gratuito, compilado por el propio usuario, de la documentación ofrecida por Siemens para este producto. Se declina cualquier responsabilidad sobre
la integridad de este documento. Esta previsto exclusivamente para fines propios e internos del usuario. No se permite su entrega a terceros.
9/29/2020