Scribd
Upload
736 views1 page

Isometric Check List

The document is a checklist for reviewing piping isometric drawings with 26 items to verify including line numbers and sizing matching P&IDs, line connections and branches matching latest PIDs, iso continuation sheet numbers shown in order, piping classes and specifications verified with PIDs, north direction and flow direction indicated correctly, pockets lines conforming to process requirements, elevations and distances properly marked, straight lengths and instrument requirements verified, tag numbers of all connected equipment marked, slope requirements for flare headers and process lines shown, orientation of check valves and instruments correct regarding process flow, break flange requirements verified and provided, vents and drains at low and high points, critical line routing verified by stress analysis, supports indicated per standards and

Uploaded by

Rajesh Khera
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
736 views1 page

Isometric Check List

The document is a checklist for reviewing piping isometric drawings with 26 items to verify including line numbers and sizing matching P&IDs, line connections and branches matching latest PIDs, iso continuation sheet numbers shown in order, piping classes and specifications verified with PIDs, north direction and flow direction indicated correctly, pockets lines conforming to process requirements, elevations and distances properly marked, straight lengths and instrument requirements verified, tag numbers of all connected equipment marked, slope requirements for flare headers and process lines shown, orientation of check valves and instruments correct regarding process flow, break flange requirements verified and provided, vents and drains at low and high points, critical line routing verified by stress analysis, supports indicated per standards and

Uploaded by

Rajesh Khera
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Project No.

:071973C
CHECKLIST FOR PIPING ISOMETRIC
Dwg/Doc. No.:
DRAWING
TECHNIP FMC INDIA LTD.
Revision No. :0

Sl. No. DESCRIPTION YES NO REMARK

1 Line number, size conform to P&I.D & LDT ?

Line connections, i.e. From-end,To-end, and other branches are as


2
per the latest PIDs.

3 Iso continuation sht nos. are shown and these are in order ?

4 Piping classes / spec. break have been verified with P&IDs.?

5 North direction and flow direction have been indicated correctly.?

6 No pockets lines conform to process requirements ?

7 Elevations and distances have been marked properly ?

8 Straight lengths and other requirements for instruments verified.

9 Tag nos. of all connected equipments marked ?

10 Slope requirement for flare header, process lines are shown ?

Orientation of Check valves /I nstruments are O.K. w.r.t process flow


11
?

12 Requirement of break flanges verified & provided.?

13 Vents and drains are providedat low / high points ?

14 Critical line routing verified by stress analysis ?

Supports are indicated as per support standard / basis. Anchor, guide


15
location conform to stress reports ?

16 Bill of Material (BOM) conforms to PMS ?

17 Reference data for paint, insulation, coating & wrapping, given ?

18 Reference data for pressure temp.,PWHT, NDT inspection given.

19 Reference P&IDs, GADs, Stress report given ?

20 In case of revision, cloud has been marked ?

Comments from different deptt.(i.e. Process, Instrumentation) taken


21
care.?
DI-1300-0003

22 Document no. has been marked as per project requirement ?

23 All branch continuation Iso nos. are given ?

24 Line check with laser scanning file ?

25 Deviation request checked ?

26 MOC checked ?

Checked by Name : Date :

Signature :

Isometric Check List.xls

You might also like