Scribd
Upload
272 views

Rheflat Plus PDB Eng

Uploaded by

Jose AlejandroBlanco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
272 views

Rheflat Plus PDB Eng

Uploaded by

Jose AlejandroBlanco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

RHEFLAT PLUS

COVER SUBHEADING

RHEFLAT† PLUS gellant and rheological modifier is specifically designed


to increase viscosity, improve sag control and contribute to the flat
rheology of the RHELIANT† PLUS system.
RHEFLAT PLUS additive works in conjunction with an organophilic clay such as VG-PLUS† or VG SUPREME†.

Typical Physical Properties


Physical appearance..............................................................................................................................................................................................Amber liquid

Specific gravity...........................................................................................................................................................................................1.0215 at 60°F (16°C)

Flash point............................................................................................................................................................................................................. >200°F (>93°C)

Applications
RHEFLAT PLUS rheological modifier contributes to flat rheology over a wide range of temperatures typically from 40°F to 300°F (4°C to
149°C) in the RHELIANT PLUS system. It can be used in synthetic, diesel or mineral oil-base drilling fluid systems. RHEFLAT PLUS works
in synergy with organophilic clays or drill solids to produce flat rheological properties independent of fluid temperature changes. In
cold temperature applications, flat rheology allows for the use of higher flow rates with less impact on wellbore pressures than with
conventional Non Aqueous Fluids (NAF).

The required concentration of RHEFLAT PLUS depends on the base fluid selected, the drilling fluid density, the Oil or Synthetic to Water
Ratio, as well as on the emulsifier package type and concentration.

The recommended treatment for the makeup of new fluids is 0.6-1.0 lb/bbl (1.7-2.85 kg/m³). While drilling, care should be used to prevent
overtreatment by adding RHEFLAT PLUS in small increments typically, ≤0.25 ppb, and monitoring the effects over a minimum of one
circulation. RHEFLAT PLUS additive may generate excessive viscosities when added to a system with elevated low-gravity solids
content. Pilot testing is highly recommended prior to use.

Advantages
■■ Improves cold temperature viscosities by allowing a reduction in organophillic clay content
■■ Versatile gelling agent, the effects of which can be reversed (thinned) with chemical treatments
■■ Product is effective at improving low shear rate viscosities at small concentrations
■■ Stable to bottom hole temperatures to >300°F (149°C)
■■ Contributes to enhance the shear thinning profile of NAF with minimum effect on the gel strengths
■■ Optimized for use in synthetic-base fluids (e.g., isomerized olefins) but is also compatible with mineral and diesel oil-base drilling fluids
■■ Minimizes potential for barite sag

Limitations
■■ Less effective at temperatures above 300°F (149°C)
■■ Should not be used in combination with any other polymeric rheological additives without pilot testing
■■ Should not be added unless the system contains organophilic clay or oil-wet reactive drill solids
■■ Should not be used as a substitute for temporary viscosifiers
Toxicity and Handling
Bioassay information is available upon request.

Handle as an industrial chemical, wearing protective equipment and observing the precautions described in the Material Safety Data
Sheet (MSDS).

Packaging and Storage


RHEFLAT PLUS additive is packaged in 55-gal (208-L) steel drums and 550-gal (2131-L) totes.

Store in a dry, well-ventilated area. Keep container closed. Keep away from heat, sparks and flames. Store away from incompatibles.
Follow safe warehousing practices regarding palletizing, banding, shrink-wrapping and/or stacking.

This information is supplied solely for informational purposes and M-I SWACO makes no guarantees or
P.O. Box 42842
warranties, either expressed or implied, with respect to the accuracy and use of this data. All product Houston, Texas 77242-2842
warranties and guarantees shall be governed by the Standard Terms of Sale. Nothing in this document
is legal advice or is a substitute for competent legal advice.
www.miswaco.slb.com
Email: [email protected]
©2012 M-I L.L.C. All rights reserved. †Mark of M-I L.L.C.
FPB.1818.1301.R1 (E)

You might also like