KBU10005 THRU KBU1010

SINGLE PHASE SILICON BRIDGE RECTIFIER

Reverse Voltage - 50 to 1000 Volts Forward Current - 10.0 Ampere

FEATURES KBU
.15 X23L
● Ideal for printed circuit board .157(4.0)*45° (3.8 X5.7L)
● Surge overload rating: 300A peak .935(23.7) HOLE THRU
.895(22.7)
● High case dielectric strength
300
● High temperature soldering guaranteed: (7.5)
260°C/10 seconds at 5lbs. (2.3kg) tension .700(17.8)
.600(16.8) .780(19.8)
.740(18.8)

MECHANICAL DATA 1.00

MIN.
(25.4)
● Case: UL-94 Class V-0 recognized Flame Retardant Epoxy
.052(1.3)DIA.
● Terminals : Plated leads solderable per .048(1.2)TYP.

MIL-STD 202, method 208

.087(2.2)
● Mounting Position: Any .071(1.8)
.220(5.6)
.180(4.6)
● Marking: Type Number .276(7.0)
.256(6.5)

Dimensions in inches and (millimeters)

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.

KBU KBU KBU KBU KBU KBU KBU

Characteristic Symbol Unit
10005 1001 1002 1004 1006 1008 1010
Peak Repetitive Reverse Voltage VRRM
Working Peak Reverse Voltage VRWM 50 100 200 400 600 800 1000 V
DC Blocking Voltage VR

RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V

Average Rectified Output Current @TC = 100°C IO 10.0 A

Non-Repetitive Peak Forward Surge Current

8.3ms Single half sine-wave superimposed on IFSM 300 A
rated load (JEDEC Method)

Forward Voltage (per element) @IF = 5.0A VFM 1.0 V

Peak Reverse Current @TC = 25°C 10 µA

IR
At Rated DC Blocking Voltage @TC = 100°C 1.0 mA

Rating for Fusing (t < 8.3ms) (Note 1) I2t 373 2

As

Typical Thermal Resistance (Note 2) R JC 8.0 K/W

Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C

Note: 1. Non-repetitive for t > 1ms and < 8.3ms.

2. Thermal resistance junction to case per element mounted on PC board with 13.0x13.0x0.03mm thick land areas.
 KBU8005 THRU KBU810
RATINGS AND CHARACTERISTIC CURVES

FIG.1- MAXIMUM NON-REPETITIVE FORWARD FIG.2- MAXIMUM FORWARD CURRENT DERATING

SURGE CURRENT PER BRIDGE ELEMENT CURVE
300 8
PEAK FORWARD SURGE CURRENT. (A)

TJ=25 0C

AVERAGE FORWARD CURRENT. (A)

250 8.3ms Single Half Sine Wave
JEDEC Method 6
200

150 4

100
2
MOUNTED ON 4X4 INCH
50 COPPER PC BOARD
0.5" (12.7mm) LEAD LENGTH

0 0
1 2 5 10 20 50 100 0 50 100 150
o
NUMBER OF CYCLES AT 60Hz AMBIENT TEMPERATURE. ( C)

FIG.3- TYPICAL INSTANTANEOUS FORWARD FIG.4- TYPICAL REVERSE CHARACTERISTICS

CHARACTERISTICS PER BRIDGE ELEMENT PER BRIDGE ELEMENT
100 100

40
INSTANTANEOUS REVERSE CURRENT. ( A)
INSTANTANEOUS FORWARD CURRENT. (A)

Tj=100 0C
20

10 10

1 1

0.4
0
Tj=25 C
PULSE WIDTH-300 S
0.2 1% DUTY CYCLE
Tj=25 0C
0.1 0.1
0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 0 20 40 60 80 100 120 140
INSTANTANEOUS FORWARD VOLTAGE. (V) PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)