Scribd
Upload
18 views

Electronic Devies and Circuits Lab Report: Experiment # 5

This lab report documents an experiment demonstrating the operation of simple capacitor filters and RC filters for half-wave and full-wave rectifiers. The experiment involved building circuits using capacitors and resistors to filter the output of half-wave and full-wave rectifiers. Measurements were taken of voltage and current at various points in the circuits, both with and without filter components, and with variations in component values. Oscilloscope screenshots show input and output voltage waveforms. Calculations were performed and compared to measured values of DC voltage and ripple voltage. Observations about the circuit operation and effect of the filter components were recorded.

Uploaded by

Muhammad Mudassar
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
18 views

Electronic Devies and Circuits Lab Report: Experiment # 5

This lab report documents an experiment demonstrating the operation of simple capacitor filters and RC filters for half-wave and full-wave rectifiers. The experiment involved building circuits using capacitors and resistors to filter the output of half-wave and full-wave rectifiers. Measurements were taken of voltage and current at various points in the circuits, both with and without filter components, and with variations in component values. Oscilloscope screenshots show input and output voltage waveforms. Calculations were performed and compared to measured values of DC voltage and ripple voltage. Observations about the circuit operation and effect of the filter components were recorded.

Uploaded by

Muhammad Mudassar
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

ELECTRONIC DEVIES AND CIRCUITS

LAB REPORT

EXPERIMENT # 5

REGISTRATION # _________________
SECTION ________
DATE OF SUBMISSION ____________

1
EXPERIMENT # 5:
TO DEMONSTARTE THE OPERATION OF SIMPLE CAPACITOR
FILTER AND RC FILTER FOR HALF WAVE AND FULL WAVE
RECTIFIERS
CIRCUIT DIAGRAM:

MEASUREMENTS & CALCULATIONS:

2.Vac(measured) = …………….V

3. Idc (measured)=………………… mA.

4. Vo = …………………..V.

5.Measure the peak to peak ripple voltage .

Vr (p-p) =……………………… V

6. Calculate the ripple voltage using the given formula

Vr (p-p) = Idc /fC= ……………….V

7. Replace R6 of 1KΩ with R8 of 470Ω and measure peak to peak ripple.

Vr (p-p) =………………… V.

2
8. Connect C9 in parallel with C2 and measure peak to peak ripple.

Vr (p-p) =…………………… V

12. Measure and record the DC voltage at point-A and point-B.

A =……………. V. B = ……………………..V

13. Measure the peak to peak ripple voltage at point-A and point-B with oscilloscope and record.

A = ……………………V B =……………………. V.

14. Calculate the DC voltage and ripple voltage at point-A and point-B and compare with the

measured

voltage .

SCOPE CHARTS:
Input voltage waveform:
Scale on y-axis = V/box

3
Output voltage waveform:
Scale on y-axis = V/box

Waveform across diode D1:


Scale on y-axis = V/box

4
COMMENTS AND OBSERVATIONS:

You might also like