Scribd
Upload
3K views

GTAW 20 MCQ With Answer

The document contains 20 multiple choice questions about TIG welding: 1. Question 1 asks about what TIG welding denotes, with the correct answer being it stands for Tungsten Inert Gas Welding. 2. Questions 2, 12, and 15-20 ask about various aspects of TIG welding like common defects, gas leakage testing, electrode usage, torch angles, and statements about the process. 3. The remaining questions ask about topics like argon cylinder identification, regulator function, common shielding gases, polarities, power sources, electrode colors, and more technical elements of the TIG welding process. 4. In total, the questions cover definitions, equipment, parameters, and

Uploaded by

Harminder Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
3K views

GTAW 20 MCQ With Answer

The document contains 20 multiple choice questions about TIG welding: 1. Question 1 asks about what TIG welding denotes, with the correct answer being it stands for Tungsten Inert Gas Welding. 2. Questions 2, 12, and 15-20 ask about various aspects of TIG welding like common defects, gas leakage testing, electrode usage, torch angles, and statements about the process. 3. The remaining questions ask about topics like argon cylinder identification, regulator function, common shielding gases, polarities, power sources, electrode colors, and more technical elements of the TIG welding process. 4. In total, the questions cover definitions, equipment, parameters, and

Uploaded by

Harminder Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Q.

1- TIG Welding denotes -

A. Torch inclined Gas Welding


B. Torch included Gas Welding
C. Tungsten Inert Gas Welding
D. All of the above Welding

Q.2- Presence of dirt, oil and oxides on the base metal cause

A. Porosity
B. Incomplete fusion
C. Crack
D. Burn through

Q.3- Argon Cylinder is painted with

A. Maroon colour
B. Black colour
C. Red colour
D. Peacock Blue colour

Q.4- The function of gas regulator is to

A. Reduce the cylinder pressure to working pressure


B. Mix the gases in the required proportion
C. Change the volume of gas flowing into blowpipe
D. Convert the liquid into gases

Q.5- The most commonly used shielding gas in TIG Welding is -

A. Helium
B. Argon
C. Krypton
D. Xenon

Q.6- If the job is in Positive terminal and Electrode is in negative terminal then it will come under which
polarity

A. Reverse Polarity
B. Straight Polarity
C. Both
D. None of these
Q.7- TIG Welding is preferred because ___________

A. It is less costly
B. Arc control is very easy
C. It can be used for all position welding
D. It is a very fast welding process

Q.8- For TIG welding of Aluminium, following current and polarity used is ___________

A. A.C.
B. DCEN
C. DCEP
D. All of these

Q.9- TIG welding power sources are of ___________

A. Constant current type


B. Constant voltage type
C. Anyone of these
D. Power source is not required

Q.10- The colour of pure tungsten electrode is ___________

A. Red
B. White
C. Green
D. Gray

Q.11- In TIG process, function of tungsten electrode is ___________

A. To provide filler metal to the joint


B. To provide shielding effect
C. To conduct electric current to the arc
D. Both (a) and (b)

Q.12- Which of the weld defects are most common in TIG welding?

A. Porosity
B. Tungsten inclusions
C. Crack
D. Slap inclusion
Q13- Colour of 2% Thoriated Tungsten electrode is ___________

A. Red
B. Green
C. Pink
D. White

Q.14- What unit is required in GTAW process to strike the arc?

A. DC supressor unit
B. HF unit
C. Flint lighter
D. Anyone of these

Q.15- Best way to find gas leakage

A. By flame

B. By sniff

C. By matchstick

D. By soap solution

Q.16- GTAW uses a consumable steel electrode.

A. True
B. False

Q.17. GTAW torches used for welding over 200 amps should be water-cooled

A. True
B. False

Q.18- The gas cup size used is determined by the diameter of the tungsten electrode required

A. True
B. False

Q.19. The torch is held at a 45 degree angle when welding a T-Joint in horizontal position.

A. True
B. False

Q.20- Which of the following statements is/are true for welding process?

A. Generally welding equipments are very costly


B. TIG Welding results in residual stresses and distortion of workpiece
C. Two dissimilar metals cannot be joined by welding
D. All of the above

You might also like