Wireless Touchscreen Portable Monitor

Product Guide
 Product Information 01

Compatible Wired Input Equipment

PS4, XBOX, Switch, desktop, laptop, mobile phone, digital camera, set-top box, docking station and
other output devices with HDMI audio/video or USB Type-C full-function output interfaces.

WiFi Projection Support Equipment

Full range of iPhone (iOS8 and above), non-MTK Android phones supporting WiFi projection or
display, laptops, MiniPC and desktops connected via WiFi.

Touch Support Equipment

Full range of iPhone (iOS8 and above), non-MTK Android phones.
Make sure your device has normal Bluetooth function; some devices may not be able to be touched
due to incompatible Bluetooth, you can consult the vendor for details.

Packaging accessories
Portable Display 1 USB Type-C power cable（C to C） 1
HDMI Cable 1 Charger 1
USB Type-C data cable（C to C） 1 Leather Cover 1
02 Interfaces, Keys and Functions

3 3
Display Front View

1
4 2

1. Interfaces and their functions 2. Keys and their functions 3. Speaker hole
Type-C downlink data extended interface, Type-C docking station Short press up - Quick Brightness / Decrease / Previous
support for connecting external devices
Type-C charge interface (PD) 1 Short press - Exit / Back 4. Bluetooth touch
Power indicator Short press down - Quick Volume / Increase / Next function keys
Type-C interface - connected to NS, mobile phone, Long press - Power On / Off
Thunderbolt 3, laptop Type-C interface
HDMI interface - connected to desktop, laptop, PS4, XBOX, 3.5mm headphone interface
set-top box and other video output devices
 Interfaces, Keys and Functions 03

7 7
5 5

Display Back View

5. Leather cover mount hole 6. Standard VESA wall 7. WiFi signal window
mount hole, 75x75mm

1 When the display is out of power and needs to be charged or connected to external power supply,
connect the charger to this interface. PD charger supports fast charge. When you need to use the
internal battery of the display to quickly charge an external device through the PD protocol, please
connect the external device to this interface.
04 Product Parameters

Display(15.6 Inches) Display(13.3 Inches)

Screen size: 15.6” Screen size: 13.3”
Optimum resolution: 1920x1080@60Hz Optimum resolution: 1920x1080@60Hz
Display size: 344.2x193.6mm Display size: 293.8x165.2mm
Screen type: IPS Screen type: IPS
Touch support: Multi-touch Touch support: Multi-touch
Screen brightness: 300cd/m 2 Screen brightness: 300cd/m 2
Dynamic contrast: 50 million: 1 Dynamic contrast: 50 million: 1
Screen ratio: 16 : 9 Screen ratio: 16 : 9
HDR level: HDR10 HDR level: HDR10
Appearance(15.6 Inches) Appearance(13.3 Inches)
Product size: 352 (W) x 228 (H) x 9.4 (T) mm Net Product size: 310 (W) x 200 (H) x 9.4 (T) mm Net
Net weight: about 1080g (excluding leather cover) Net weight: about 860g (excluding leather cover)
Wall mount: VESA standard 75x75mm Wall mount: VESA standard 75x75mm

Power WiFi
Input: DC5V/3A, 9V/3A, 12V/2.5A 15V/2A, 20V/1.5A Automatic recognition of 2.4GHz and 5GHz networks 2
Built-in 10500mAh lithium battery Connection speed (2.4GHz ): 480Mbps
PD two-way fast charge (just connetting to Type-C charge interface) 1 Connection speed (5GHz ): 900Mbps

1 Two-way fast charge indicates charge to the lithium battery in the display and reverse charge to a mobile phone when connecting to it.
2 The frequency band at which the WiFi of the display is connected can automatically switch between 2.4GHz and 5GHz according to the
frequency band of wireless network to be connected;
 Power-on and Standby Interface 05
(The display may vary slightly in its standby interface, but is connected completely in the same way.)
Whether to access a device Whether to access network
Display WiFi SSID WiFi password Number of devices accessed SSID of the network accessed

Address configured to display WiFi module Software version

(Connect the mobile phone to the wireless network of the display. Open the browser and enter this address
in the address bar to configure WiFi for the display. See the settings on P07.)
06 HUAWEI Wireless Projection

Open the Quick Control Bar Search the display Once connected, After successful projection,
1
and select "Wireless Projection".
2 and click on the device 3 the projection is 4 you can select a mode in
name for projection. successful. the Quick Control Bar.

1. The interface of a Huawei mobile phone is taken as an example. Huawei EMUI system supports
computer mode or mirror mode for WiFi projection of mobile phones in computer mode.
2. The position of "WiFi Projection" in other brands of mobile phones may be different. Please read
the smartphone manual or consult the supplier.
 SAMSUNG Smart View 07

Open Quick Control Bar Search the display Once connected, the After successful projection,
1
and select "Smar View".
2 and click on the device 3
projection is successful.
4 you can select Audio output
name for projection. in the Quick Control Bar.

Other Android phones have similar wireless projection settings, you can find the wireless screen
options in the settings menu.
08 iPhone Screen Mirroring
Enter the WiFi and Network of the mobile phone. Find the SSID shown on the display screen.
Enter the password and connect it. The SSID name and the password are shown on the upper part
of the display screen.

Connect the mobile Open the shortcut

Select the Wireless The projection
1 phone to the wireless 2 bar and select 3 Display. 4 is completed.
network of the display. "Screen Mirror".
 Projection via Router Network 09

Connect the mobile phone Open the browser and Enter the "Settings" Click the network you
1 to the cable broadcast 2 enter 192.168.203.1 3 interface. Click on 4 want to connect and
network of the display. in the address bar. "Internet". enter the password to
Click on Go / OK. connect to it.

Once you connect the wireless display to the router, you can disconnect the WiFi of the
mobile phone from the wireless network of the display. After that, when you connect your
mobile phone to a network router, you can operate the projection in the same way as
described above at any time.
10 Configure WiFi Projection

After connecting the mobile

phone to the wireless network
of the display, you can open
the browser of the mobile
phone and enter Set resolution

"192.168.203.1" in the address

bar. Select to configure interface language
Click on Go/OK, and you can
configure WiFi for the display Customize WiFi password of the display

on the current page.

Customize WiFi name of the display

Change WiFi communication channel of the

display (to reduce interference)

1
Set video playback mode (Mirror/Streaming)

Upgrade configuration program

Restart WiFi

Videos are played in streaming mode by default. Some players may have incompatibility issues at video
streaming. You can enter the submenu AirPlay to set playback in mirror mode and restart it, by which
most problems in video playback via projection can be solved.
 Bluetooth Touch Keys and Functions 11
1. You can control the function keys on the Bluetooth touch panel by touching their icons with your finger;
2. When the indicator of an icon lights blue, it means that the function is enabled, or the function is disabled
and the indicator is off.
When connecting to iPhone, be sure to
change the screen to its corresponding
Portrait mode status (Landscape/Portrait) according to
Landscape/Portrait Switch by touching the projection screen. When connecting
Touch switch icons with finger to Android phone, you are allowed to
Landscape mode change the screen twice only when the
touch position is not accurate.

iPhone touch mode Long touch the icon until the icon indicator is lit
(change to iPhone mode).

Reset WiFi Long touch the icon until a prompt pops up on the screen
(to reset WiFi).

Android
Long touch the icon until the icon indicator is lit
touch mode
(change to Android mode)

When the indicator flashes, it If you can not find the Bluetooth device
indicates Bluetooth is to be connected;
named "FGE-X03T *", you can long touch
Bluetooth When the indicator is normally on, it this Bluetooth icon until the iPhone/Android
status indicator indicates that Bluetooth is connected. icon flashes once and then you can reset/wake
When the indicator is off, it up Bluetooth.
indicates that Bluetooth sleeps.
12 iPhone Bluetooth Touch Connection

iPhone icon lights blue, Bluetooth icon flashes Long touch iPhone Android icon lights blue, Bluetooth icon flashes
icon for five seconds

Enter the Settings Search the Bluetooth When a pop-up window The connection is
1 of the phone and 2 device named FGE-X03Ti 3 occurs, select Pair. 4 completed.
click on Bluetooth. and click it.
 Android Bluetooth Touch Connection 13

Android icon lights blue, Bluetooth icon flashes Long touch Android iPhone icon lights blue, Bluetooth icon flashes
icon for five seconds

Enter the Settings Search the Bluetooth Pairing. If a pop-up window

1 of the phone. 2 Click on Bluetooth. 3 device named FGE-X03TA 4 occurs, select OK/Pair.
and click it.
14 iPhone Touch Position Calibration

NOTE When connecting iPhone for touch, you need to determine portrait or landscape mode according to the content to be
displayed. Touch portrait/ landscape switch key to determine the touch position in portrait/landscape mode.
When the indicator lights blue, it indicates the screen is in portrait mode;
when the indicator is off, it indicates the screen is in landscape mode.

Configuration for Touch Screen Driver of Some New Mobile Phones

1 Connect the mobile phone to the Bluetooth touch device correctly.

2 Open the "FGE Game Room" APP and wait for a few seconds.
The "touch-screen configuration delivered successfully" message will pop up.
If you have connected a Bluetooth touch device, the "GEEKWEI" sign will appear at the upper left corner
Open iPhone App Store
of the APP interface. If not prompted, kill the background process of the APP, and then open the APP Search and install "FGE" APP
again or seek customer service for help.
 FAQ on Bluetooth Control 15

Android "FGE" APP Download

Download via OneDrive: https://1drv.ms/f/s!AsWQVQRW6TqNatdFo46YDOAv3M0

FAQ on Bluetooth Control

How to switch between iPhone Bluetooth mode and Android Bluetooth mode?
Long touch the iPhone/Android icon on the front of the display with your finger until the indicator of the corresponding icon is lit.

How to judge the Bluetooth connection is successful?

When the Bluetooth icon on the display flashes blue light, it indicates that the Bluetooth of the display is to be connected.
When the blue light is normally on, it indicates that the Bluetooth of the display is connected.

Why touch is disabled after Bluetooth connection?

1. Check if the Bluetooth mode in which the display is touched corresponds to that of the mobile phone. In iPhone mode, the indicator
of the iPhone icon normally lights blue and the Bluetooth name is "FGE -X03Ti". In Android mode, the indicator of the Android icon
normally lights blue and the Bluetooth name is "FGE-X03TA".
2. If the corresponding mode is enabled, long touch the reset key until a prompt pops up. Reset the display, and then reconnect Bluetooth.
3. If it still cannot be solved, click the Set key behind the Bluetooth name on the phone. Select Unpair. Restart the display. Re-pair and connect.
4. Some devices may have compatibility issues on Bluetooth. You can contact the supplier for help.
16 Connect Mobile Phone via USB Type-C Cable

1 Connect Mobile Phone to Display via USB Type-C

After the mobile phone is connected via a cable, you need

to touch it by connecting Bluetooth. Please refer to the
section of Bluetooth connection for touch.

Mobile Phone

USB-C to C data cable

Mobile Phones Supporting USB Type-C Connection

Samsung: S8, S8 +, S9, S9 +, Note8, Note9, S10 +, S10, S10e, Note10, Note10+
Huawei: Mate10, Mate10Pro, Mate RS, Mate20, Mate20Pro, Mate20X, Mate20RS P20, P20Pro,
P30, P30Pro, Mate30, Mate30Pro, Mate30RS
Honor: V30, V20, Honor Note10 Smartisan: R1, Pro2S
Some new mobile phones may not appear on the support list. You can contact customer
service for new support devices.
 Connect to Switch 17

Connect Switch to Display via a Cable

Switch

USB-C to C data cable

FAQ on NS connection
Q: Why can't the screen of the Switch be projected on the display screen after proper connection?
A: 1. Turn on the display and then connect the NS and the display with a data cable.
2. Remove the Joy-Con controller from the host computer. If there is still no screen push, it may
be due to low battery of the display. Charge the display or connect to an external power supply.
18 Wired Connection to More Devices

Connect Laptop to Display via USB Type-C Cable

Connect to laptop
Type-C interface

USB-C to C data cable

Connect PS4/XBOX Game Consoles and Other

Output Devices via HDMI Interface

Connect to game console

HDMI Out interface

HDMI
HDMI Cable
HDMI
 Connect Devices to HDMI Interface 19

Connect Windows Laptop/ Desktop to Display via HDMI Cable

HDMI
Connected to
laptop/desktop

HDMI Cable

HDMI

Connect the HDMI interface of a laptop or desktop to the HDMI interface of a portable display via
HDMI cable (Note that desktop with integrated graphics should be distinguished from that with
discrete graphics. If a discrete graphics card exists, you need to connect to the HDMI interface of
the discrete graphics card)
 Warranty Card
Guarantee for repair within 1 year:
(1) The product has quality problems caused by factors other than non-artificial damage within 1 year from the date of receipt;
(2) The warranty seal of the product is complete and has not been removed; there are no records of maintenance conducted in maintenance
points which are not designated by the company.

Product name/model Purchase date

Username Telephone

AirView
Account ID Order No.

User address

Dealer name/address

Maintenance record