How To Install The VOCOM II (88894000) Firmware
Uploaded by
frank mutaleHow To Install The VOCOM II (88894000) Firmware
Uploaded by
frank mutaleHow to install the VOCOM II
(88894000) Firmware
1
1. Search and Download all 1. Visit www.premiumtechtool.com/technical-
available updates via Client support/under “Adapters and
Firmware Updates” section to
Update. obtain/save the latest VOCOM II
2. Access the VOCOM II driver file to your computer.
Configuration Application 2. Install the VOCOM II driver.
(reference pg. 4 -6 for instructions) (reference next page for instructions)
3. Access the VOCOM II
Configuration Application
(reference pg. 4-6)
2
Follow these instructions only if you
downloaded the driver from the website.
Locate the saved file and extract the file contents. Open the folder and Install (double click) the file.
Right click to Extract
If prompted for a password, please contact the IT
Support desk 1(877)978.6586 for information. 3
Plug the VOCOM II
into the PC USB
port. The VOCOM II
will display under
“All devices”
Please note: Serial Number
(SN) differs. Do not connect
to the vehicle at this time.
When you receive the “Please
On your PC, go to Start, All update device firmware” pop up
Programs. Click on VOCOM II message. Click the to
folder and then click to launch continue.
the VOCOM II Configuration
Application.
4
Click “Update device”. The software will begin to update. Note: Updating
device can take a few minutes.
When the Update is complete. The VOCOM
Configurator will refresh the settings.
5
Open Tech Tool and go to “Settings” to
configure the adapter settings.
Here you can select the VOCOM II and then
“Activate” to enable.
Next, click OK to close window.
Please note: VOCOM I and VOCOM II use different drivers
and must be activated separately.
You’re now ready to connect to a
vehicle!
6
