Scribd
Upload
178 views

Distillation Column

Distillation is a process that separates mixtures into individual components based on differences in their boiling points. It works by heating the mixture to vaporize components with lower boiling points, which are then condensed and collected. There are two main types of distillation columns: batch columns which process feed intermittently, and continuous columns which process a steady stream of feed. Distillation columns contain trays, packings, or valves to facilitate vapor-liquid contact during separation. Key components of distillation equipment include the reboiler for vaporization, condenser for condensation, and reflux drum to collect and recycle condensed vapor back to the column for improved separation.

Uploaded by

Ranjani J Deepak
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
178 views

Distillation Column

Distillation is a process that separates mixtures into individual components based on differences in their boiling points. It works by heating the mixture to vaporize components with lower boiling points, which are then condensed and collected. There are two main types of distillation columns: batch columns which process feed intermittently, and continuous columns which process a steady stream of feed. Distillation columns contain trays, packings, or valves to facilitate vapor-liquid contact during separation. Key components of distillation equipment include the reboiler for vaporization, condenser for condensation, and reflux drum to collect and recycle condensed vapor back to the column for improved separation.

Uploaded by

Ranjani J Deepak
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 23

Module 6

Distillation –An Introduction


a process in which a liquid or vapour mixture of two or
more substances is separated into its component
fractions of desired purity, by the application and
removal of heat.

distillation is the most common separation technique

Distillation is based on the fact that the vapour of a


boiling mixture will be richer in the components that
have lower boiling points.
Types of Distillation Columns
Batch Columns:
the feed to the column is introduced batch-wise
the column is charged with a 'batch' and then the
distillation process is carried out
When the desired task is achieved, a next batch of feed
is introduced.
Continuous Columns
continuous columns process a continuous feed stream
capable of handling high throughputs
BASIC DISTILLATION EQUIPMENT AND OPERATION
Main Components of Distillation Columns

A vertical shell - separation of liquid components is carried out


Column internals- trays/plates and/or packings
Reboiler - provide the necessary vaporisation for the distillation
process
Condenser - cool and condense the vapour leaving the top of the
column
Reflux drum - hold the condensed vapour from the top of the
column so that liquid (reflux) can be recycled
back to the column
Distillation Column - Schematic
Basic Operation and Terminology
Feed is introduced usually somewhere near the
middle of the column to a tray known as the feed
tray

Feed tray divides the column into a top enriching or


rectification section and a bottom stripping section.

The feed flows down the column where it is


collected at the bottom in the re-boiler – feed
vapours formed.

The vapour raised in the reboiler is re-introduced


into the unit at the bottom of the column.

The liquid removed from the reboiler is known as


the bottoms
Basic Operation and Terminology
The vapour moves up the column,
and as it exits the top of the unit, it
is cooled by a condenser.
The condensed liquid is stored in a
holding vessel known as the reflux
drum.
Some of this liquid is recycled
back to the top of the column and
this is called the reflux.
The condensed liquid that is
removed from the system is known
as the distillate or top product.
COLUMN INTERNALS
Bubble cap trays:

has riser or chimney fitted over each hole,


and a cap that covers the riser.

The cap is mounted so that there is a


space between riser and cap to allow
the passage of vapour.

Vapour rises through the chimney


and is directed downward by the cap,
finally discharging through slots in the
cap, and finally bubbling through the
liquid on the tray.
Valve Trays
• Perforations are covered by liftable
caps.

• Vapour flows lifts the caps, thus self


creating a flow area for the passage of
vapour.

• The lifting cap directs the vapour to


flow horizontally into the liquid, thus
providing better mixing than is possible
in sieve trays.
Sieve trays
• Sieve trays are simply metal plates with
holes in them.

•Vapour passes straight upward through the


liquid on the plate.

• The arrangement, number and size of the


holes are design parameters.

• Because of their efficiency, wide operating


range, ease of maintenance and cost factors,
sieve and valve trays have replaced bubble
cap trays in many applications.
Liquid and Vapour Flows in a Tray Column
Each tray has 2 conduits, one on each
side, called ‘downcomers’.

Liquid falls through the downcomers


by gravity from one tray to the one
below it.

Being lighter, vapour flows up the


column and is forced to pass through
the liquid, via the openings on each
tray.

The area allowed for the passage of


vapour on each tray is called the active
tray area.
Liquid and Vapour Flows in a Tray Column
Liquid and Vapour Flows in a Tray Column
The frothing of the liquid on the active tray area is due to both passage
of vapour from the tray below as well as boiling.
As the hotter vapour passes through the liquid on the tray above, it
transfers heat to the liquid. In doing so, some of the vapour condenses
adding to the liquid on the tray.
The condensate is richer in the less volatile components than is in the
vapour.
Because of the heat input from the vapour, the liquid on the tray boils,
generating more vapour.
This vapour, which moves up to the next tray in the column, is richer in
the more volatile components.
This continuous contacting between vapour and liquid occurs on each
tray in the column and brings about the separation between low
boiling point components and those with higher boiling points.
Packings
increase the interfacial area for vapour-liquid contact
impart good vapour-liquid contact
packings provide extra inter-facial
area for liquid-vapour contact
efficiency of separation is
increased for the same column height
packed columns are shorter than trayed columns
Packed columns are called continuous-contact
columns while trayed columns are called staged-
contact columns because of the manner in which
vapour and liquid are contacted.
COLUMN REBOILERS
heat-exchangers to bring the liquid at the bottom of
the column to boiling point
COLUMN REBOILERS
DISTILLATION PRINCIPLES
Vapour Pressure and Boiling
energy input raises vapour pressure
a liquid is said to ‘boil’ when its vapour pressure equals the
surrounding pressure
the ease with which a liquid boils depends on its volatility
liquids with high vapour pressures (volatile liquids) will
boil at lower temperatures
the vapour pressure and hence the boiling point of a liquid
mixture depends on the relative amounts of the
components in the mixture
distillation occurs because of the differences in the
volatility of the components in the liquid mixture
The Boiling Point Diagram
shows how the equilibrium compositions of the
components in a liquid mixture vary with temperature
at a fixed pressure
Relative Volatility
measure of the differences in volatility between 2
components, and hence their boiling points.
indicates how easy or difficult a particular separation will
be
The relative volatility of component ‘i’ with respect to
component ‘j’ is defined as

yi = mole fraction of component ‘i’ in the vapour


xi = mole fraction of component ‘i’ in the liquid
VAPOUR LIQUID EQUILIBRIA
Vapour-Liquid-Equilibrium (VLE) Curves
Constant pressure VLE data is obtained from boiling point diagrams
The VLE plot expresses the bubble-point and the dew-point of a binary
mixture at constant pressure.
VLE CURVES

You might also like