DSEGenset®

DSE8004 SPECIFICATIONS

DC SUPPLY

10” COLOUR MULTI-SET REMOTE OVERVIEW DISPLAY

CONTINUOUS VOLTAGE RATING
8 V to 35 V continuous

CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing
supply was at least 10 V before dropout
and supply recovers to 5 V. This is achieved
without the need for internal batteries

MAXIMUM STANDBY CURRENT

824 mA at 12V, 412 mA at 24V

MAXIMUM OPERATING CURRENT

883 mA at 12V, 436 mA at 24V

INPUTS/OUTPUTS A TO C
INPUTS
Negative switching

OUTPUTS
2 A DC at supply voltage

OUTPUT D
Changeover volt-free output
8 A AC at 250 V AC

DIMENSIONS
OVERALL
397 mm x 232 mm x 42 mm
15.7” x 9.2” x 1.7”

PANEL CUTOUT
359 mm x 204 mm
14.1” x 8.0”

DISPLAY SIZE
210 mm x 160 mm
8.3” x 6.3”
Diagonal - 265 mm (10.5”)

STORAGE TEMPERATURE RANGE

KEY FEATURES WHEN  KEY BENEFITS -40 °C to +85°C
-40 °F to +185 °F
CONNECTED TO THE  • Compatible with DSE86xx,
COMPATIBLE MODULES DSE87xx & DSE88xx Load Share OPERATING TEMPERATURE RANGE
• Multiple modules (up to a maximum Modules -30 °C to +70 °C
of 20) within the same load sharing • Data communication link allows -22 °F to +158 °F
system can be viewed remote system management
• Touch-screen enabled • 800 x 480 pixel screen for high
• RS232, RS485 and Ethernet clarity
communications
• Audible alarm
• Front panel mounting
• Protected front panel configuration
• Configurable display options
• Remote system monitoring
• Trend Analysis
• Configurable graphical user
interface with software ‘widgets’

RELATED MATERIALS
TITLE PART NO.
DSE8004 Installation Instructions 053-171
DSE8004 Colour Remote Display Manual 057-134
DSE8005 SCADA  Suite Manual 057-128
DSE8610 Data Sheet 055-083
DSE8620 Data Sheet 055-099
DSE8660 Data Sheet 055-086
DSE8710 Data Sheet 055-184
DSE8760 Data Sheet 055-090
DSE8810 Data Sheet 055-116
DSE8860 Data Sheet 055-139

DEEP SEA ELECTRONICS PLC UK DEEP SEA ELECTRONICS INC USA

Highfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PH 3230 Williams Avenue, Rockford, IL 61101-2668 USA
TELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303 TELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708
EMAIL [email protected] WEBSITE www.deepseaplc.com EMAIL [email protected] WEBSITE www.deepseausa.com
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457 055-182/04/14 (3)
 DSEGenset®

DSE8004 ENVIRONMENTAL TESTING STANDARDS

ELECTRO MAGNETIC COMPATIBILITY

BS EN 61000-6-2
10” COLOUR MULTI-SET REMOTE OVERVIEW DISPLAY EMC Generic Immunity Standard for the
Industrial Environment
BS EN 61000-6-4
EMC Generic Emission Standard for the
Industrial Environment

ELECTRICAL SAFETY
BS EN 60950
Safety of Information Technology Equipment,
including Electrical Business Equipment

The Remote Overview Display This display module offers * Compatible Modules TEMPERATURE
module is designed for use with comprehensive large screen • DSE8610 Synchronising Auto BS EN 60068-2-1
Ab/Ae Cold Test -30ºC
modules from the DSE86xx, graphs, charts, metering, trend Start Load Share Control Module BS EN 60068-2-2
DSE87xx and DSE88xx range of analysis, power display and engine • DSE8620 Auto Mains Failure & Bb/Be Dry Heat +70ºC
Load Share Control modules*, status information in a clear image Instrumentation Control Module
VIBRATION
giving a choice of display options and text format. • DSE8660 Auto Transfer Switch & BS EN 60068-2-6
suitable for a wide variety of Mains Control Module Ten sweeps in each of three major axes
applications. One (1) display User selectable display ‘widgets’ • DSE8710 Rear Mounted 5 Hz to 8 Hz at +/-7.5 mm, 8 Hz to 500 Hz at
Synchronising Auto Start Load 2 GN
overview module is connected to allow customisation of the lower
multiple compatible modules via a part of the 10” screen. Share Control Module HUMIDITY
data communication link up to a • DSE8760 Rear Mounted Auto BS EN 60068-2-30
maximum distance of 1.2 km on Transfer Switch & Mains Control Db Damp Heat Cyclic 20/55 ºC at 95% RH
48 Hours
RS485. Module BS EN 60068-2-78
• DSE8810 Auto Start Colour Load Cab Damp Heat Static 40 ºC at 93% RH
Share Control Module 48 Hours
• DSE8860 Auto Transfer Switch &
SHOCK
Mains Colour Control Module BS EN 60068-2-27
Three shocks in each of three major axes 15
GN in 11 mS

DEGREES OF PROTECTION
PROVIDED BY ENCLOSURES
BS EN 60529 IP65 - Front of module when
installed into the control panel with the
supplied sealing gasket.

COMPREHENSIVE FEATURE LIST TO SUIT A WIDE

VARIETY OF LOAD SHARE APPLICATIONS

TO COMPATIBLE
MODULES *
For further
information please
see operators
DC POWER ETHERNET RS232 RS485 manual.
SUPPLY 8-35V

DSE8004 MULTI-SET REMOTE OVERVIEW DISPLAY

7

OTHER

CONFIGURABLE VOLT FREE USB HOST USB SLAVE

INPUTS / OUTPUTS CHANGE OVER OUTPUTS

3 1

ISSUE 1