ULTRASONIC CALIBRATION BLOCKS

Shape Description Standard Made Material

Order Code Type
(Not to Scale) /Application To Size
I.I.W Calibration Standard.
Calibration of Shear and B.S. 2704 Steel
V1 A2 compression wave probes. DIN 54120
(BS) Checking beam angle, emergent IIW (International
point and resolution. Calibration Institute of Welding) 25x100x300mm
of time base and gain settings.

V1/50 A2 Generally as V1. Thicker block

BS 2704
Steel
(BS) minimizes side wall echoes. 50x100x300mm

Small calibration block for site Steel

V2 A4 checking of shear wave probes,
BS 2704
(Specify hole IOW (Institute of
(BS) time base and gain. 1.5mm or
diameter) Welding) 12.5x43x75mm
5mm diameter hole target

Generally as V2. Thicker block Steel

V2/20 A4 eliminates side wall echoes.
(Specify hole BS 2704
(BS) 1.5mm or 5mm diameter hole
diameter) target. 20x43x75mm

Generally as V2. Thicker block Steel

V2/25 A4 eliminates side wall echoes.
(Specify hole BS 2704
(BS) 1.5mm or 5mm diameter hole
diameter) target 25x43x75mm

Beam Calibration Block. Beam

profile and resolution checks for Steel
BCB A5 shear wave probes. Sensitivity
BS 2704
(BS) checks for shear and
compression probes. 9 off 1.5mm 50x75x305 mm
holes.
Evaluating dominant frequency,
pulse, length, dead zone and Steel
A6 A6 resolving power for shear and BS 2704
(BS) compression probes as BS4331 25x50x150mm
part 3, 1974.
Steel
Checking shear wave probe
RTB A7 resolution as BS4331 part 3, BS 2704
(BS) 1974. Steps of 2,3,4 and 5mm. 74mm radius
75mm thick
Ladder step wedge for time base Steel
Tolerance
calibration with thickness
LSW SPECIAL
measuring compression probes.
0.05 mm
0.002 8x15x120mm
8 steps from 1mm to 8mm.
Determination of signal curve and Steel
A5 Blank beam characteristics of single
ESI crystal probes (longer range).
ESI 98-7
Type B 1.6mm diameter hole. 50x75x305mm

Determination of signal curve and Steel

A5 Blank beam characteristics of single
ESI crystal probes (longer range).
ESI 98-7
Type C 1.6mm diameter hole. 50x75x305mm
Checking twin crystal probes for Steel
ESI-BCB sensitivity. Contains four
ESI additional 1.5mm diameter holes
ESI 98-2
N-A5 to A5 block. 50x75x305mm

321 N.8th St La Porte TX 77571 USA 14320 Wicks Blvd San Leandro, CA 94577 USA Via Roganti 16 23020 Prosto di Piuro SO Italy
Ph: +1 281 470-2010 • Fax: +1 281 470-2024 Ph: +1 510 352-6767 • Fax: +1 510 352-6772 Phone: +39 0343 263626 • Email [email protected]
www.3endt.com www.ir100.com www.3endt.eu
 ULTRASONIC CALIBRATION BLOCKS

Shape Description Standard Made Material

Order Code Type
(Not to Scale) /Application To Size
Setting sensitivity levels for weld Steel
ASME ASME Sec. V 150x60x19 mm
Thickness : ASME testing. Sizes and locations of
Article 4
25mm BCB flaws are dependent on weld
Fig T-434.2.1
1” thickness.

ASME Setting sensitivity levels for weld

ASME Sec. V
Thickness :
ASME testing. Sizes and locations of Steel
Article 4
50mm BCB flaws are dependent on weld 150x120x38 mm
Fig T-434.2.1
2” thickness.

ASME Setting sensitivity levels for weld

ASME Sec. V
Thickness : testing. Sizes and locations of Steel
ASME flaws are dependent on weld
Article 4
150x250x75 mm
75mm Fig T-434.2.1
3” thickness.
Setting DAC characteristics for Steel
DAC shear wave and compression Tolerance 50x75x300 mm
(Specify SPECIAL wave probes. Flaws typically 0.06 mm Or Size dependent
Thickness) 1.5mm diameter holes at 20%, 0.002” on product
40%, 60% and 80% of thickness. thickness
Ladder step wedges for
Ladder Tolerance Steel
calibration of Ultrasonic
0.07 mm
Step Regular Thickness Gauges
0.002”
Wedge 1 to 10 mm 200x20x10mm
Steps of 1mm (10 steps)
Ladder step wedges for
Ladder Tolerance Steel
calibration of Ultrasonic
0.05 mm
Step Regular Thickness Gauges
0.002”
Wedge 2 to 20 mm 140x20x20 mm
Steps of 3mm (7 steps)

Ladder step wedges for

Ladder Tolerance Steel
calibration of Ultrasonic
0.05 mm
Step Regular Thickness Gauges
0.002
Wedge 5 to 25 mm. Steps of 5mm 100x 20x25 mm
(5 steps)

Ladder step wedges for Tolerance

Ladder calibration of Ultrasonic 0.05 mm Steel
Step Regular Thickness Gauges 0.002”
Wedge ¼ “ to 1” Steps of ¼” 3” x ¾” x 1”
(4 steps)
Ladder step wedges for
Ladder Tolerance Steel
calibration of Ultrasonic
0.05 mm
Step Regular Thickness Gauges
0.002”
Wedge 0.10” to 0.50” 4 ¼” x ¾” x ½”
Steps of 0.10” (5 steps)
Ladder step wedges for
Ladder Tolerance Steel
calibration of Ultrasonic
0.05 mm
Step Regular Thickness Gauges
0.002”
Wedge 2 to 20 mm 200x20x20 mm
Steps of 2mm (10 steps)
Ladder step wedges for
Ladder Tolerance
calibration of Ultrasonic
0.05 mm Steel
Step Regular Thickness Gauges
0.002” 160x20x20 mm
Wedge 1 to 8 mm
Steps of 1mm (8 steps)

321 N.8th St La Porte TX 77571 USA 14320 Wicks Blvd San Leandro, CA 94577 USA Via Roganti 16 23020 Prosto di Piuro SO Italy
Ph: +1 281 470-2010 • Fax: +1 281 470-2024 Ph: +1 510 352-6767 • Fax: +1 510 352-6772 Phone: +39 0343 263626 • Email [email protected]
www.3endt.com www.ir100.com www.3endt.eu