Scribd
Upload
26 views

Film Thickness Per Coat: Technical Data Sheet Hardtop AS

This technical data sheet provides specifications for the Hardtop AS product, including: - A recommended dry film thickness of 40-60 μm and wet film thickness of 80-120 μm. - Surfaces must be clean, dry and free of contamination for lasting adhesion of subsequent products. - The product can be applied by spray or brush and has a mixing ratio of 4 parts Comp A to 1 part Comp B.

Uploaded by

TamerTamer
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
26 views

Film Thickness Per Coat: Technical Data Sheet Hardtop AS

This technical data sheet provides specifications for the Hardtop AS product, including: - A recommended dry film thickness of 40-60 μm and wet film thickness of 80-120 μm. - Surfaces must be clean, dry and free of contamination for lasting adhesion of subsequent products. - The product can be applied by spray or brush and has a mixing ratio of 4 parts Comp A to 1 part Comp B.

Uploaded by

TamerTamer
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Data Sheet

Hardtop AS

Film thickness per coat


Typical recommended specification range

Dry film thickness 40 - 60 μm


Wet film thickness 80 - 120 μm
Theoretical spreading rate 12,5 - 8,3 m²/l

Bright colours may need film thickness in the high end of the recommended specification range to achieve
opacity.

Surface preparation
To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any
contamination.

Surface preparation summary table

Surface preparation

Substrate Minimum Recommended

Coated surfaces Clean, dry and undamaged compatible Clean, dry and undamaged compatible
coating (ISO 12944-4 6.1) coating (ISO 12944-4 6.1)

Application
Application methods
The product can be applied by

Spray: Use airless spray or conventional spray.


Brush: Recommended for stripe coating and small areas. Care must be taken to achieve the
specified dry film thickness.

Product mixing ratio (by volume)

Hardtop AS Comp A 4 part(s)


Hardtop AS/HB Comp B 1 part(s)

Date of issue: 7 November 2016 Page: 2/5

This Technical Data Sheet supersedes those previously issued.


The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at www.jotun.com

You might also like