Please read this user manual carefully before using Note: Place the earbuds back into the

Note: Place the earbuds back into the case when Clear Pairing Record (Only Available in TWS Playtime on a Single Charge: 3.5-4 h 4. Do not use oil or any volatile liquid to clean
the product and keep it safe for future reference. How to Use not in use to extend their service life and prevent Mode) Total Playtime with Case: approx. 20 h this product.
loss. 5. Do not listen at high volumes for extended
Charge In TWS mode, press and hold the Touch Control
Product Diagram • Charge the Earbuds of both earbuds simultaneously for 7 seconds to Operations and Functions periods of time.

Put the earbuds into the charging case and charging

Pairing clear the pairing history. The white LED indicator
6. Do not use the headphones while operating
a motor vehicle. Do not use the headphones
will start automatically. will glow for 5 seconds. Answer Phone Call any time it would be dangerous to be unaware
Earbuds © Charge the Charging Case Initial Pairing Hang up Phone Call
Disconnect Bluetooth Connection of noises around you.
Connect the charging case to a power source 1. Uncover the case, the earbuds will turn on and Double click Touch Control on 7. Adult supervision is required for children age
and charging will start automatically. The LED connect to each other automatically (TWS mode). Disconnect the earbuds from your phone. The either earbud 6 and under.
indicator will stay solid white when charging and 2. The earbuds are in pairing mode when LED earbuds enter TWS mode and try to reconnect
8. Batteries must be used with caution.
turn off once fully charged. indicator on the Master flashes white twice with previously paired devices. The earbuds will Hold Current Call and Answer
Do not attempt to disassemble the battery
every second and that on the Slave flashes turn off automatically if there is no connection another Call
yourself. Never use a battery or charger that
Check the Battery Level once every 7 seconds. within 5 minutes. Place them back into the case Double click Touch Control on
first then take them out again to power on. has been damaged. Keep batteries away from
® Check the Battery Level of the Earbuds 3. Go to your device setting, enable the Bluetooth either earbud
Check the battery level of the earbuds from your function and find "omthing AirFree" in the
Left electronic objects As a general rule, you should
Restore to Factory Settings Hang up Current Call, and not expose the batteries to very low or very high
phone screen when successfully paired. Bluetooth connection list. Tap on the name to
Resume the Held Call temperatures (below 0°C or above 45°C). It is
Note: Only the battery level of the earbud with lower connect. Place the earbdus into the case, and uncover
Double click Touch Control on recommended to recharge the battery at a room
power will be shown on your phone. Some phone 4. The earbuds will turn off automatically if there the case for 30 seconds to restore the earbuds
models do not support this function. either earbud temperature of 5 to 25 °C.Incorrect use of
Charging Case in no connection in 5 minutes. into factory settings.
Note: Due to the characteristics of Bluetooth signal, battery or battery replaced by an incorrect type
• Recharging the Charging Case while Charging Both Earbuds are in Your Ears may cause fire, explosion or other risk. Dispose
the Earbuds. Auto Pairing the connection may be unstable in the places with
intensive 2.4 GHz electromagnetic signal interference. Play I Pause: Double click Touch of used batteries according to the instructions.
1. The LED indicator of the charging case will stay Take the earbuds out of the case, they will connect Control on right earbud 9. Please place the earbuds back into the case
solid red when charging and turn off when with each other first then try to reconnect with the Activate Voice Control: Double when not in use for proper storage.
fully charged.
2. When place the earbuds into the charging case,
latest connected device automatically. Specifications click Touch Control on left earbud 10. If you don't feel comfortable after wearing
Right Volume and Track Selection: Not
the LED indicator of the case will not turn on the headphones, please refer to an aurist for
Mandatory Pairing Name: omthing AirFree True Wireless In-Ear supported, please operate via your advice on whether or not in-ear headphones
while those of the earbuds will stay solid blue.
Enter mandatory pairing: Headphones device.
LED Indicator are suitable for you.
Standby Mode 1. Press and hold the Touch Control of both Product Model: EO002BT To prevent possible hearing
r Place the earbuds into the case and cover the earbuds for 7 seconds at the same time. Net Weight: 13 g Safety Caution damage, do not listen at high
lid, the earbuds will disconnect with your device 2. The LEDs flashes twice every second. Charging Port: Type-C volume levels for long periods.
and enter charging mode. 3. The earbuds will turn off automatically if there Speaker Impedance: 16 Q 1. Never disassemble the headphones. There

r, is no connection within 5 minutes. Input: 5V—1A are no user-serviceable parts inside.

How to Wear Output: 5V—150mA 2. Do not expose the headphones to temperatures CE
Take the earbuds out of the case and wear them Pairing Timeout Bluetooth Connection: Bluetooth 5.0 below -4 °F (-20 °C) or to temperatures above
properly as per the L and R indicators. Bluetooth Protocol: BLE/HSP/HFP/A2DP/AVRCP 140 °F (60 °C).The product operation ambient Declaration of Conformity Hereby, Tiinlab Acoustic
Charging Port 1. When the earbuds are in paring mode, if there Technology Limited declares that the radio
Codec Supported: AAC/SBC temperature is 0°C~45°C.
Auto-Off when Battery Low is no operation or connection within 5 minutes,
Bluetooth Range: 10 m 3. Do not use the headphones in a thunderstorm equipment type omthing AirFree True Wireless
Note: Above illustration is for reference only. The they will turn off automatically.
When battery is low the earbuds will turn off (Open and unobstructed environment) storm. This could prevent the headphones In-Ear Headphones of EO002BT isin compliance
real product may be slightly different due to product 2. Place them back into the case, cover the lid
automatically with the LED indicator glowing Charging Time: 1.5 h from working properly, and also increase your with Directive 2014/53/EU. The full text of the EU
updates. and uncover the case to turn on again.
solid white for 1s. Charging Case Capacity: 550mAh chance of being electrically shocked. declaration of conformity is available at the following
15 16 17