STREET FURNISHINGS LTD

The one-stop shop for all highway professionals

6
Section 1 Collapsible Bollards 2-4
Anti Ram-Raid Bollards 5
Traffic Management
Telescopic Bollards 6-7
Temporary Signage Mild Steel Bollards 8
Roadworks Equipment Boundary Bollards 9
Removable Bollards 10-11
Section 2 Gates & Barriers 12-15
Highway Maintenance Products Amenity Lighting Bollards 16
Traffic Lights 17
Section 3 Access Control 18-21
Pedestrian Guardrailing Cones, Cylinders & Lamps 22
Temporary Barriers 23
Crash Barriers & Fencing
Traffic Separators 24
Salt & Grit Bins 25
Section 4 Cycle/Perimeter Barriers 26-27
Decorative & Amenity Bollards Portable Guardrailing 28
Column Protection 29
Section 5 Rubber Barrier Protection 30
Amenity & Street Furniture Flexible Bollards 31
Car Park Crash Barriers 32-35
Section 6 Traffic Flow Plates 36-37
Car Parks & Access Control Speed Ramps 38
Road Markings, Road & Bay Marking Studs 39
Industrial & Traffic Mirrors 40-41
Wheel Clamps 42-43
 Collapsible Bollards

Key operated standfast post (ex stock)

This highly successful post is ideal for reserving individual car
parking spaces. It can be used as a visual deterrent to restrict
access into driveways. Can be locked in the down or upright posi-
tion.The floor mounted base is secured to a prepared concrete
foundation by 3 No. M12 anchor bolts.

In the case of multiple orders, locks can be supplied with the

same keys or with keys to differ. Anchor bolts as well as build in
base option can be supplied at an extra cost.

Specification:
63.5mm dia x 620mm o/height mild steel. Base cast aluminium.
Finish: Yellow powder coated for high visibility. Other colours
available on request.
Ground clearance: 102mm
Weight: 6kg
Alternatives: Galvanised finish. Rigid version available.

Padlock standfast collapsible post

(ex stock)
A low cost popular post designed to restrict access to car
parking spaces, driveways, etc. Floor mounted base is secured
by the use of 3 No. M12 anchor bolts to a prepared con-
crete foundation. It is lockable in the upright position by
means of a padlock, which can be supplied with keys the
same or to differ. Padlock, anchor bolts and alternative build
in base can be supplied at extra cost.

Specification:
63.5mm dia x 768mm o/height
Finish: Hot dipped galvanised
Ground clearance: 102mm
Weight: 7kg
Alternatives: Powder coated only. Rigid version available

Triangular padlock parking barrier

A space reservation barrier designed to fold completely flat when
not in use.Vehicles can drive over it without damage to vehicle or
post.The barrier can be locked in the upright or down position.
Secured by a padlock supplied with 2 No. keys to pass or differ.
This device is easily floor mounted by 3 No. M12 anchor bolts
(supplied).

Specification:
Fabricated from 5mm thick mild steel.
650mm erected height, 58mm a/ground fully collapsed, 762mm
o/length, 115mm o/width.
Finish: Red powder coated with white banding
Ground clearance: 58mm
Weight: 12kg

2 The one-stop shop for all highway professionals

 Hinged lockable parking
post (ex-stock)
Designed for the reservation of individual car
park bays.When erected the post prevents
unauthorised access and provides control
without the need for supervision. Only the
authorised user’s key will release the locking
mechanism, allowing the post to be lowered
and thus enabling the vehicle to pass over it.
In some situations it is possible to site the
post so that it can be re-erected when the
space is occupied, thereby acting as an added
vehicle theft deterrent.

The hinged lockable post features an integral

cylinder lock and a totally enclosed locking
mechanism.To erect, simply raise the post to Type B hinged lockable post
the verticle position and apply a moderate Available for emergency service access. Usually
downward pressure to the top of the post, specified by local authorities or fire brigades,
This will secure the post within the base plate this post is similar to the hinged lockable post
recess.The key is not required to lock the (above) but includes an extended hinge pin
post.To lower, release the locking mechanism (called a type B adaptor) to allow a fire brigade
with the key and lower the post.The post is padlock to be fitted at the bottom of the post.
lockable in the up and the down position.

Hinged Toplok parking post

Similar in design and use to the hinged lockable post.The Toplok post does not have an integral
cylinder lock or spring assistance, but requires a padlock to be located on the locking rod
which protrudes through the weather cap.The locking rod features two holes; the lower hole
is for locating a padlock when the post is in the vertical position and thereby locking the post
upright.The upper hole is for safety and conveniently retaining the padlock when the post is in
the lowered position.

Stealth post
For reserving individual parking bays as well as
controlling common access points for smaller
car parks and low use access areas.The stealth
post also offers a deterrent to car theft when
locked upright, and extra security for car parks
in general. Fitting flush with the ground when
down, the posts provide no obstruction to vehi-
cles or pedestrians.The hinged lid lowers down
to safely cover the excavated hole when in both
the up and down positions. Not suitable for
heavily used areas nor for HGV use.

Street Furnishings Ltd Tel: 01189 404717 Fax: 01189 403216 3

 Collapsible Bollards (continued)

Heavyweight key operated post

A larger and stronger version of the key operated standfast post, ful-
fills the role where a more substantial post is required.The base is
pre-drilled to accept 4 No. M12 anchor bolts.The locks can be sup-
plied with keys the same or to differ. Anchor bolts and alternative
build in base can be supplied at an extra cost.

Specification:
89mm dia x 762mm o/height. Mild steel post and base.
Finish: Red powder coated with a white band (other colours avail-
able on request).
Ground clearance: 110mm
Weight: 10kg
Alternative: Rigid version available

Heavyweight folding lockable post

This heavy duty post is intended for those applications where a standared
car parking post is insufficient. For use mainly where heavy vehicles are
involved.The floor mounted post is lockable in both the down and upright
positions by means of a padlock. Standard post is floor mounted.
Alternative build in base, padlock and anchor bolts available at an extra
cost.

Specification:
115mm dia x 994mm o/height
Finish: Black and white finish (galvanised base)
Ground clearance: 150mm
Weight: 23kg
Alternative: Rigid version available

4 The one-stop shop for all highway professionals

 Anti Ram-Raid Bollards

Telescopic anti ram-raid post

This extremely strong post is very effective in pro-
tecting warehouses, shops, stores and property
against ram-raiders. It has been approved by both
Police and local government authorities and recom-
mended by insurance companies.

The unit is secured by a padlock situated inside the

flanges to make it difficult for access. Raising and low-
ering can be achieved by using a T-key.The post can
be removed and replaced when damaged or in need
of servicing, reducing the time needed to excavate.

Specification:
Section of body: 127mm x 76mm R.S. joist
Height above ground: 720mm (open)
Length of unit o/a: 950mm (closed)
Finish: Hot dipped galvanised
Weight: 40Kgs
Alternative: Rigid version available

Padlock can be supplied at an extra cost.

Fixed anti ram bollards

We have introduced an anti ram-raid option to our
selection of fixed bollards.The RSJ can be welded to
the inside of any 114mm and 168mm diameter fixed
bollard to make it ram-raid resistant.

Street Furnishings Ltd Tel: 01189 404717 Fax: 01189 403216 5

 Telescopic Bollards

Telescopic Mole post

The mole post is a low cost solution for providing
effective security for a variety of applications, garage
forecourts, drives and car parks. It can also be used
for site demarcation i.e. cordoning off areas.The
post is designed to retract into the ground when
not in use; it is manually raised into its protecting
position and secured by means of a padlock at the
base.

Specification:
Section of body: 100mm x 100mm steel tube
Height above ground: 610mm (open) Baby Mole post
Length of unit o/a: 785mm (closed) As the name implies this is a smaller
Finish: Hot dipped galvanised Telescopic parking post version of the mole post and is a very
Weight: 25Kgs This post is an alternative to the telescopic mole cost-effective way of protecting
Alternative: Rigid version available post, with the padlock (not supplied) garage doors and gates, etc.
being situated at the top of the post,
Padlock can be supplied at an extra cost. not at the base, for ease of operation. Specification:
Section of body: 100mm x 100mm
Padlock can be supplied at an extra steel tube
cost. Height above ground: 310mm
(open)
Length of unit o/a: 470mm (closed)
Finish: Hot dipped galvanised
Weight: 12Kgs
Alternative: Rigid version available
Lockable telescopic parking post
This is similar to both the Mole and telescopic parking post Padlock can be supplied at extra cost.
but is superior in so much that it incorporates an integral
pushlock and can only be lowered or raised using a T-key.The
central stem can be removed and replaced if damaged or in
need of servicing.When the post is in the lowered position it
is protected by an 8mm thick steel hinged plate strong
enough to enable vehicles to pass over without damage.

Specification:
Section of body: 100mm x 100mm steel tube
Height above ground: 610mm (open)
Length of unit o/a: 795mm (closed)
Finish: Hot dipped galvanised
Weight: 30Kgs
Alternative: Rigid version available

Supplied with 2 No. keys (further keys can be supplied at an Round telescopic post
extra cost). Locks can be keyed alike or to differ. A more aesthetically pleasing alterna-
tive to the telescopic parking post,
but circular rather than square. Can
be used around garage forecourts and
car parks in various colours to suit
the surroundings.The post can be
Telescopic traffic stopper removed and replaced when damaged
This is a larger version of the telescopic parking or in need of servicing.
post and is therefore much stronger to fulfil a
role where a substantial post is required to deter Specification:
ram raiders, etc. Section of body: 101.6mm dia steel
tube
Specification: Height above ground: 610mm
Section of body: 120mm x 120mm steel tube (open)
Height above ground: 660mm (open) Length of unit o/a: 795mm (closed)
Length of unit o/a: 914mm (closed) Finish: Outer body hot dip gal-
Finish: Hot dipped galvanised vanised, post sprayed nylon.
Weight: 40Kgs Weight: 28Kgs
Alternative: Rigid version available Alternative: Rigid version available

Padlock can be supplied at an extra cost. Padlock can be supplied at extra cost.

6 The one-stop shop for all highway professionals

 All measurements in mm

Street Furnishings Ltd Tel: 01189 404717 Fax: 01189 403216 7

 Mild Steel Bollards

Newtown bollard Plain galvanised flat top 1500 x 140mm L to R: 76mm, 101mm, 127mm Bollards painted to order
and 152mm plain steel galvanised

Range of mild steel bollards

Available in round tube or square section. Adding security to your area as the bol-
lards are exceptionally strong and will not fracture on impact. Ideal for ram-raid
deterrance, protected parking and pedestrian walkways.

Steel bollards can be manufactured in a wide range of sizes and lengths - plain,
stepped or with rings and castings.They are produced in galvanised form as standard
but can be supplied painted or powder coated to most BS or RAL colours.

We carry some sizes in stock for quick delivery. For extra strength steel bollards can
be filled with concrete on site.

Range of polyurethane bollards

Street Furnishings supply a range of polyurethane bollards, all with a poly-
mer casting over an internal steel core.These combined materials and
construction give the bollards inherent structural strength, but also will
not shatter on impact. Minimum maintenance is required as the bollards
will not rust as they are made from a self-coloured flame retardant engi-
neering grade polymer.

Many designs are available to order in most BS or RAL colours. Gold

banding and reflective finishes can be supplied to your requirements.

Streetwise bollard
“The bollard that takes care of itself”.

This bollard has a smooth basic design which,

once installed, requires zero maintenance.
Highly resistant to accidental and deliberate
damage.

Dimensions:
Typical height: 1000mm
Typical root depth: 300mm
Typical diameter: 150mm

Available in standard black and a range of

popular colours.

8 The one-stop shop for all highway professionals

 Boundary Bollards

Sprung boundary post

The sprung boundary posts are similar to
the standard fixed boundary post but incor-
porate a heavy duty spring towards the bot-
tom of the post thus enabling it to with-
stand light to medium impacts from vehi-
cles. Used for marking boundaries of park-
ing spaces, siting between hinged posts and
for protection of walls and buildings. After
impact the spring allows the post to return
to the near vertical position - minimising Boundary post
damage to the post and to the vehicle. Boundary posts are fixed posts with either
ragged ends for casting in or flanged ends for
The sprung boundary post can spring to bolting down.They can be positioned between
approximately 30o from the vertical posi- hinged posts to prevent unauthorised parking,
tion. or used as a permanent post by themselves to
Specification: mark lateral limits, or with chain and eyelets
• Made of mild steel tube 48mm o.d. 750mm to block access points.
above ground. Ragged version 240mm
below ground
• Flanged version requires 3 No. 12mm bolts.
Circular flange of mild steel, diamater
134mm, 6mm thick
• Weather cap of black polypropylene
• Galvanising is standard finish. Colour coated
options available at extra cost

Installation:
• Flanged posts should be bolted to a suitable
existing surface, preferably concrete
• Ragged posts should be cast in a concrete
foundation approx 300mm cube.The ragged
ends ensure a good anchorage into con-
crete

Rubber bollard
The flexible bollard which can bend down to
90o without normally being damaged, it will in
time return to its original position. Low speed
impacts will cause virtually no damage to the
bollard, therefore considerable replacement
costs are avoided.

Extremely robust, durable and maintenance

free, the Universal and Konus are made from
recycled granulated rubber.The bollards are
flexible with no sharp edges, making them safe
for pedestrians, cyclists and drivers. 200kg
force needed to bend to 45o.
Universal rubber bollard Konus rubber bollard
Installation: Installation:
Excavate hole 780mm deep, 300mm diame- Simply drill and bolt down on to a suitable
ter, insert steel tube, pack sand to required concrete surface. 6x12mm bolts available at
depth then place bollard in hole and pack extra cost.
sand around to secure it.

Model Finish Height above Below ground Diameter at Extra info

ground (mm) depth (mm) base (mm)

Universal Black 1000 340 140 Steel socket 780mm long x 160mm od,Weight 25kg
Konus Black 740 n/a 140 Flange height 50mm x 305mm diameter
Weight 16kg + 1.5kg for flange

Street Furnishings Ltd Tel: 01189 404717 Fax: 01189 403216 9

 Removable Bollards

Heavyweight removable bollards (ex-stock)

This range of bollards will meet all requirements to prevent unauthorised
entry of vehicles and restrict access.The bollard is a heavy duty post that
locates into a socket embedded into concrete.The post is locked in position
by use of the socket flap and a padlock (supplied at extra cost).When the
post is removed, the socket flap can be padlocked in the closed position
keeping the socket free from rubbish until the post is next used.The remov-
able bollard is available in three sizes:
Small: For use in driveways, forecourts, etc.
Intermediate: Car park use, town centres, supermarkets, garages.
Large: For heavy duty applications where lorries, vans, etc. are involved.

Handles are supplied on the large bollard only to assist removal of the post.
All three sizes have amber reflectors on both sides.

Standard colour: Black and white (other colours available).

We are also able to supply rigid posts in addition to these removable posts.
These are available in either floor mounted or build in type versions. Chain
lugs are not standard but can be supplied upon request.

Ref Small Inter- Large

mediate

A 70 x 70 80 x 80 100 x 100

B 690 965 1100

C 200 250 300

D 140 140 200

Weight 7kg 13kg 22kg

Measurements in mm

10 The one-stop shop for all highway professionals

 Removable post RPP
Forms a rigid barrier when positioned. It is used to
exclude the access of all but emergency and service
vehicles from traffic-free zones and to prevent unau-
thorised access. Commonly found where access is
only occasionally required, or required during day-
time so posts can be locked in at night.To remove
the post, the padlock (available extra) is unlocked,
the pin is disengaged from the locking bracket on the
underside of the ground plate and the post can be
lifted out. Once clear, the flap closes flush with the
ground leaving no projections or unprotected holes.
Retaining pin and hinge pin of zinc plated mild steel.

Security post type RSP

removable security post
Similar to the standard removable post RPP,
but suppled complete with a high security
sliding bolt padlock and two keys and a
hardened steel retaining pin. Ideal for pro-
Removable wooden
viding a high security vehicle obstruction
for car forecourts, driveways, perimeter and bollard
access points, thereby providing a physical, • Common size 1500 x 150 x
secure barrier to car theft.When the post 150mm
is removed, the socket flap closes flush with • 4-way weather top
the surrounding ground level. • With or without reflectors

Road warning signs

Street Furnishings can provide road warning signs to be used in conjunction with our vehicle access control
equipment. It is recommended that signage is used to warn of speed, height or entry restrictions.

Specification:
300mm signs can be used for private roads and signs 600mm upwards are available for public highways. Signs
are constructed from (11 gauge, 3mm thick) aluminium as standard.

Lightweight foamex signs are also available.

3m, 3.5m, 4m and 5m by 76mm diameter galvanised steel posts can also be provided along with relevant
fixings.

A small sample from our vast range of available signs Cycle parking sign, used with the cycle stand Speed ramp sign on galvanised steel post

Street Furnishings Ltd Tel: 01189 404717 Fax: 01189 403216 11

 Gates & Barriers

Swinging gate
The swinging gate is of mild steel tubu-
lar construction throughout and is
based upon a rigid triangular form, com-
plete with strengthening struts and a
central plate to accommodate a sign
(available at extra cost).The gate swings
on a tubular sleeve, mounted on brass
bushes for ease of movement. Maximum
width available is six metres. If opening
is larger, we strongly recommend the
use of two gates locked centrally by use
of a removable latch post.

Finish: white (other colours available on

request).

Recommended height of top beam

above ground 1000mm. Gates are sup-
plied with 1 No. latch post. A further
latch post can be supplied (at extra
cost) for locking gate in the open posi-
tion.The gates can be locked by padlock
or, at an extra cost, by an integral push
lock.

Single or double swing gate

• Catch post of 90 x 50 x 3mm steel
Specification: • Catch post adjustable to ±70mm
• Galvanised steel construction painted red with white/red class 2 • Additional catch post is required to lock gate in open position
reflectors
• Main pivot post 120 x 120 x 5mm steel, 966mm to underside of Installation:
boom • Main foundation 600 x 600 x 500mm deep minimum
• Boom length up to 6.0m • Catch post foundation 300mm cube
• Boom of 60 x 60 x 3mm steel • Also available with ragged end for casting into ground
• Lockable by padlock (available extra)
• Main post - 4qty 16mm bolts required to bolt down Available as 3m, 4m, 5m, 6m (inside measurement flange to flange =
• End catch post 4qty 12mm bolts needed given length minus 200mm)

Base plate for swing gate

12 The one-stop shop for all highway professionals

 Manual arm barrier
Specification:
• Steel pivot post 120 x 120 x 5mm mild steel
• End catch post 50 x 50 x 4mm mild steel
• Finish - galvanised and painted red
• Height 1.0m to underside of boom
• Boom - up to 7.0m length made of rectangular aluminium sec-
tion, 76mm x 38mm, 3.2mm thick, finished in white with red
class 2 reflective tape
• Boom weight 2.0kg/m

Installation:
• Recommended concrete foundation 600 x 600 x 500mm deep
minimum for main post
• Catch post foundation 300mm cube
• Also available with ragged end for casting into ground
• Requires 4 qty 16mm bolts for main pivot post. Main base size
400 x 400 x 10mm steel
• 4 qty 12mm bolts required for catch post
• Catch post adjustable to ±70mm
• Lockable in raised and lowered position by padlock (available
extra) Padlock can fit at either end
• Skirt option available, for up to 6m size only

Available as 3m, 4m, 5m, 6m, 7m (measurements from flange front Base plate for end catch post for manual arm Base plate for manual arm barrier
to end of boom). barrier and swing gate

Height restrictor (fixed or swing)

Specification:
• Galvanised steel main post construction 90 x 90 x 3mm
(fixed). Base 400 x 400 x 10mm thick. 120 x 120 x 5mm
for swing version main post
• Swing boom catch post 90 x 50 x 3.6mm thick. Base 340 x
254 x 10mm thick
• 2.05m ±70mm standard clearance to knocking arm
• All fabrication of galvanised steel construction
• Finish painted red with white class 2 reflective tape
• 4 qty 16mm bolts required for each leg
• Swing boom lockable by padlock (avilable extra)
• Swing boom version with additional catch post available for
High restrictor occasional access by high sideed vehicles. Additional catch
post will be required if swing boom is to be locked in the
open position
• Up to 6m post centres
• Also available with ragged end for casting into ground
• Road warning signs are available

Available as 3m, 4m, 5m, 6m (both fixed and swing versions)

Installation:
Main foundations 600 x 600 x 500mm deep minimum. Catch
post foundations 300mm cube.

Base plate for catch post of swing height

Base plate for fixed height restrictor restrictor

Street Furnishings Ltd Tel: 01189 404717 Fax: 01189 403216 13

 Gates & Barriers (continued)

Single barrier gate

14 The one-stop shop for all highway professionals

Double barrier gate

Street Furnishings Ltd Tel: 01189 404717 Fax: 01189 403216 15

 Amenity Lighting Bollards

Flat top bollard

• Classical slim line design
• Robust aluminium construction
• High performance polycarbonate refractive lens
• Fused cut-out with SWA cable terminations
• Large access door for easy installation
• Wide range of clour finishes available
• Finished in grey as standard

Lamp options:
• 50W SON-E/I (internal ignitor) - E27 cap
• 50W MBFU Deluxe - E27 cap
• 9W TC-S compact fluorescent, 4000oK - G23 cap
• 100W (max) GLS - E27 cap

Materials: Dimensions in mm
• Head - pressure die cast aluminium, multi-stage chromate pre-treatment, powder
coated in grey finish
• Body - extruded aluminium, multi-stage chromate pre-treatment, powder coated
in grey finish
• Lens - clear polycarbonate prismatic refractor

Photometric data:
Cat No. Spacing distance to achieve typical mid-point illuminance
15 lux 10 lux 5 lux 2 lux 1 lux
CBSE50 3.0m 5.5m 7.0m 9.0m 12.0m
CBME50 3.0m 5.0m 6.0m 8.0m 10.0m
CBCT209 3.0m 4.0m 5.0m 7.0m 8.0m
CBGE100 3.0m 4.0m 5.0m 7.0m 8.0m

Dome top bollard resistant polycarbonate diffuser will withstand

• For use in pathways, walkways, urban spaces, rough treatment
piazzas • Versatility in lamp choice - the wide range of
• Robust, complies with BS EN 60598 - good value lamp types accommodated makes for a very ver-
and available in two sizes satile luminaire
• IP65 - very good protection against weather for • Choice of bases - the zinc coated base plate is
a long reliable life standard but a root mounted version is available
• Extruded aluminium housing - tough and durable for greater strength
with a very weather resistant black powder coat- • Range of options - including a 3-hour integral
ed finish emergency version, photocell control and a white
• Vandal resistant diffuser - the clear ribbed UV- housing

Technical data:
• Two body sizes - available in 500mm and 1100mm
heights, extruded aluminium
• Finish - black powder coated as standard
• Lamp types - 70W SON, 80W and 125W MBF/U and 2 x
18W TCD/CFL

Dimensions:
Type Height Diameter Weight
mm mm Kg
500 500 180 5.8
1100 1100 180 8.5

16 The one-stop shop for all highway professionals

 Traffic Lights

Range of polycarbonate signal heads

• Widely accepted for use in loading bays, car parks and dock levelling installations, plus
many other special applications
• Maintenance free, self colour polycarbonate housing in black (grey and other colours
available)
• Modular - can be built into multiple aspects
• E27 Edison screw optics with Fresnel (100mm) and spiderweb (210 & 300mm) lenses
• Employs swivel mounting bracket or pole top fixing, both with enclosed cable entry
• Full range of coloured lenses, mounting fittings, control systems, cables
• Lamps available 240 & 110V in standard and long-life versions
• Vandal resistant lenses and door screws

Safelite 210 round PH210

May be assembled up to five aspects and can have
a flasher unit inside.The 320mm high by 270mm
wide units are 410mm deep overall with slot-in
polycarbonate hood or 210mm in depth without
Safelite 100 square PHZ100 hood. Fixing arrangements are very flexible, with a
May be used singly or built up into virtually any choice of spigot, pole top fittings or angle brackets
combination of colour signals and can incorpo- to fit any surface. In all cases signal head angle is
rate a flasher unit.The modules are moulded adjustable and may be locked into position.
with integral hoods in impact-resistant self- Maximum recommended lamp wattage is 65W.
coloured polycarbonate, with 100 x 120mm
rectangular Fresnel lenses. Maximum recom-
mended lamp wattage is 40W. Safelite 300 Stop-Go light
round PH300 • Fully conforms to EMC emissions - BS EN 55014-
Heads may be wall or pole mounted using swiv- 1:2001
May be assembled up to four
el brackets.They may also be mounted against a • Manufactured to operate at 240V (alternative volt-
aspects and can have a flasher
pole with push fit end caps in place of brackets. ages available on request)
unit inside.The 350mm high • Low power consumption
by 350mm wide units are • Supplied with 6m cable
530mm deep overall with
Safelite 100 round PH100 slot-in polycarbonate hood or
May be used singly or built up into virtually any Body:
270mm in depth without • Tough vandal resistant housing made from a single
combination of colour signals and can incorpo- hood. Fixing arrangement is by
rate a flasher unit.The 150mm square modules high density polyethylene moulding
angle bracket to fit any sur- • UV stabilised
are moulded with integral hoods in impact- face.The signal head angle is
resistant self-coloured polycarbonate, with • UL94 fire retardant test
adjustable and may be locked • Fixed to various sizes of posts by means of stain-
100mm dia Fresnel lenses. Maximum recom- into position. Maximum rec- less steel wall fix-
mended lamp wattage is 40W. ommended lamp wattage is ing brackets
65W. • Vertical or hori-
Heads may be wall or pole mounted using swiv-
zontal fitting
el brackets.They may also be mounted against a
option
pole with push fit end caps in place of brackets.
Lens pods:
• LED light source -
selected for high
light output
• Low maintenance -
greater than
100,000 hour life
expectancy
• 2 x sealed pods
with 12 self-
coloured LEDs
• Optically designed
to maximise light
output
• Vandal resistant
polycarbonate lens

Street Furnishings Ltd Tel: 01189 404717 Fax: 01189 403216 17

 Access Control

Auto arm barriers tive, flexible and swift control of traffic flow is
The Street Furnishings AU series of automatic required.
rising arm barriers has been proven to provide
a robust and reliable means of effectively con- Specification:
trolling vehicular access. Suitable for a wide Cabinet: 1030 x 350 x 350mm, 2mm steel.
range of applications, the barriers are designed Polyester powder coated traffic blue/dark grey
for constant use and incorporate advanced (other colours available). Lockable access door,
drive and logic control functions with a quiet internally latched removable lid.
and rapid operation. Linkage: Zinc plated. Sinusoidal three arm
drive linkage, adjustable. Clutch mechanism
The Street Furnishings AU barrier combines an prevents damage if the boom is maliciously
elegant external appearance with a robust forced up.
internal linkage and fixing system.The smooth Arm: 76mm o.d. aluminium tube, powder
operation of the barrier arm is provided by coated white. Red (class 2) reflective banding.
the combination of a powerful, controllable Counterbalance: Dual tension spring, micro
motor, accurate position sensing and custom- adjustment.
made counterbalance springs.The JD-78 logic Motor: Torque 55 Nm max. Manual arm
control unit can accept inputs from a full range release mechanism. 0.37kw 3-phase motor,
of access control actuation systems, including supplied through inverter. Single phase supply
intercom, card control, radio remote and only required.
inductive loop technologies. Inverter: Output torque control. Power con-
version. Arm motion control.
The AU-3.0, AU-4.5 and AU-6.0 barriers are Logic controller: JD-78 parking control
manufactured to provide years of reliable serv- logic. Master on/off switch. Override raise,
ice at the heart of a complete vehicle access lower and automatic operation. LED monitor-
control system ing for operation and input status. Position
sensing optical switches (additional mechanical
The AU barrier offers a high quality solution to fail safe).
vehicle access control situations where effec- Power supply: Single phase, 240v, 5amp.

18 The one-stop shop for all highway professionals

 Range of control Induction loop & vehicle detectors
equipment Inductive loop detectors and photoelectric cell systems
Street Furnishings offers a full range of can be used to control both raising and lowering of the
remote, vehicle detection and access control barrier. Inductive loops detect metallic objects that pass
equipment ideally suited to provide easy through the conductive field they generate. Photoelectric
operation and effective access control for cells use a reflective beam to sense an object as it passes.
private car parks. All our control systems are Closing and safety detectors lower the arm only once the
sourced from market leading companies, each vehicle has safely passed.
meeting the highest standards of manufacture
and operation. Each control has been exhaus- The AU barrier logic provides “rollback” protection.
tively tested with the AU barrier to guaran- Should another vehicle be detected before the barrier is
tee compatibility and long-term reliability. All fully closed, the arm will automatically raise thus minimis-
controls are supplied with full OEM manuals, ing any risk of damage to the vehicle or barrier.
installation instructions and warranties.
Dual channel vehicle detector

Remote controls Warning systems -

Push buttons and switches provide easy local control signs & beacons
of the barrier - for barrier systems that are perma- A full range of signs is available that
nently manned. Alternatively, a key-switch can be fitted can be fitted to the barrier arm or
to the barrier cabinet and control override opening on a separate post.Warning bea-
and closing controls (key may be removed from any cons (LED) can be integrated with
position). the barrier giving permanent or
flashing visual warnings.The LED
RF radio remote control offers a simple and reliable beacons are available in red, white
means of opening the barrier arm.With a large oper- and orange.
ating range and up to 150 transmitters for each
receiver, the remote transmitter and receiver combi-
nation is ideal for barriers with a limited number of
users, or as an additional control system.
Radio remote transmitters & receivers

Card technology
Magnetic stripe and proximity card technologies provide the
ideal solution for controlling access for a large number of users. LED flashing beacon
Each card is encoded with a site code and an individual number
providing very secure access control and easy system manage-
ment.Timed allocation and capture (magnetic stripe only) sys- Override controls
tems are also available. During peak hours, especially on sites
adjoining busy main roads, it may be
The standard card controller provides a stand-alone, easily pro- desirable to allow the barrier arm to
grammed card control system, featuring verify, void and add remain raised.The programmable
functions and a 4-digit site code and memory for up to 10,000 timer allows the barrier to be raised
cards. Programming may be in batches or individually.The card during programmed periods and
controller may be used to link two readers together to control revert to fully automatic operation
both entry and exit through a single barrier. when required.The 7-day timer is
fully programmable for single or mul-
Magnetic stripe card reader
tiple periods (day, combination of
days and times).The barrier arm only
closes behind the first vehicle outside
of the time period (in conjunction
Intercom with a closing detector).
Intercom systems provide easy remote verification before allow-
ing access - the most cost-effective means of providing visitor
access through a barrier. Each intercom provides high quality
audio, distinctive ringing tone and a barrier opening button on
the handset unit. Intercom systems can be provided to cater for
a wide range of situations and requirements. From controlling
single or multiple barriers to single or multiple locations, each
with a dedicated handset and selectable from the barrier.

Vandal resistant and integrated video systems are also available.

Single point intercom entry panel 7-day programmable timer

Street Furnishings Ltd Tel: 01189 404717 Fax: 01189 403216 19

 Access Control (continued)

Installation & layout Code & token access

Site surveys are advised for all automatic systems Numerical code keypads provide a vandal resistant,
to ensure correct, safe operation and selection of easily managed control system. Each keypad may be
the most suitable equipment. Suitable signage is rec- programmed with up to 50 entry codes of 4, 5 or 6
ommended to ensure drivers and pedestrians are digits. A six digit manager’s code provides re-program-
aware of automatic barrier operation. ming security. A no-cash value token acceptor system
provides easy control of vehicle access through a bar-
All installation work must be carried out by experi- rier - ideal for sites with large numbers of visitors.
enced and qualified personnel, ensuring that correct Usually combined with a “free entry” system.
ground works and power supply are properly and
safely completed in accordance with applicable
Magnetic key systems are also available.
statutory regulations.

The layouts below are only for guideline purposes.

20 The one-stop shop for all highway professionals

Access control equipment - ordering information

Street Furnishings Ltd Tel: 01189 404717 Fax: 01189 403216 21

 Cones, Cylinders & Lamps
75cm Roadhog
45cm Roadhog

Recycled cone
Our most popular cone.
• 450mm fitted with DES2 cat sleeve
• 750mm self-weighted

Mark II
Plain
Mark II
No waiting cones
• Recycled
• Two-piece 500mm
• Tri-sided
Mark III
50cm No Waiting Dominator

50cm/20”

Two-piece cones 1 Metre

75cm/30”
• Fitted with DES2 cat sleeve
• Heavy recycled base for good stability
• Excellent for staking
• Totally complies with BS873
• Available in 500mm, 750mm & 1000mm

Traffic cylinders and bases Temporary road studs

Concrete Fixing Bolts

Unibase Glue Mat Asphalt Fixing Bolts

Glo-studs

Flashing lamps

Glo-Post Springback Cylinder Post with Unibase

Microlite 2 Minilite Lamp Cone Bracket
75cm/30” and 45cm/18” heights available 75cm/30” and 45cm/18” heights available

22 The one-stop shop for all highway professionals

 Temporary Barriers

Titan barrier 2-metre and 1.5-metre

1.5 metre Titan barrier 2 metre Titan barrier

Smaller manhole barrier sets

Highly portable systems.

Manhole kit

Hazard Moorgate barrier Hazard Moorgate barrier - Moorgate barrier 3 gated

black cheveron
Champion manhole
barriers - available in
three designs

Cone barrier
system

75cm Roadhog slotted barrier 75cm slotted two- Mark V cone converter Mark V cone converter
part cone barrier fits Fleximan end - fits Turret end -
capped boards capped boards

Temporary barrier systems

Metal fencing support pins

(do not comply with Chapter 8)

J Web fencing Bodyline base J Web fencing with J Web upright and
sand-filled base
Zebra tape

Street Furnishings Ltd Tel: 01189 404717 Fax: 01189 403216 23

 Traffic Separators

Utility traffic
separator
Available in two different lengths
and several colour options, the
Utility is highly versatile. It is
sturdy enough for use in
permanent situations if required
or it can form a roundabout with
a diameter of 4.5m upwards.

• Integral linkage system negates the need for

pins or bolts
• Easy to assemble jigsaw fixing
• Lightweight for easy transportation and
positioning
• Maintenance free
• Optional logos and colours available at extra
cost
• Can be part filled with sand, gravel or water

Pozecone traffic separator

The innovative design of the Pozecone
combines a traffic cone and traffic kerb into
one unit. It is totally unique and highly cost-
effective.

Ideal for use as a safety barrier, it can equally

be utilised for traffic management purposes. A
spacer unit and corner piece make this system
exceptionally flexible for all locations. • Exceptional stability in poor weather conditions
• Much higher visibility than standard cones
• Positive fixing
• Tough, durable one-piece moulding with integral jig-
saw fixing
• Can be filled with either sand or water
• Stackable for easy transportation and storage
• Handle recess for either forklift or manual handling
• Standard D2 sleeve, other options available

24 The one-stop shop for all highway professionals

 Salt & Grit Bins

Bee Hive bin Dimensions:

• Full 290o opening Height (measured at back) 704mm
• Capacity 8.8 CUFT (250 litres) Depth (measured back to front 600mm
• Excellent nesting, perfect for summer storage Width 1050mm
Weight 15Kg

Grit/salt bin
Moulded in tough polyethylene with a one piece
fully integrated hinge arrangement.They are vandal
resistant and completely rot proof.The lettering
‘Grit’ is embossed into the moulding provising per-
manent identification. Standard colour supplied is
yellow. Non-standard colours, additional lettering
or plates for personal identification can be fitted at
extra cost. Drain holes are provided in the base.

Type Capacity Height Depth Width

ft3 m3 cwt kg ins mm ins mm ins mm

A 6 0.17 4 204 28 712 26 661 26 661

B 12 0.34 8 407 30 762 28 712 32 813

Street Furnishings Ltd Tel: 01189 404717 Fax: 01189 403216 25

 Cycle/Perimeter Barriers

Sheffield cycle barrier/stand

26 The one-stop shop for all highway professionals

 Perimeter barriers • Manufactured from mild steel tube to BS1387 or BS8232/5 ERW
To help secure site perimeters and provide a permanent obstacle to • 76mm barriers can be supplied in a removable version - lockable by
vehicle access. Also used to secure motorcycles.To mark boundaries, ground sockets and padlock
form trolley parks and protect vulnerable door entrances and exits. • Grade 304 stainless steel is standard, but grade 316 can be supplied
to order for marine and other demanding environments
• A variety of sizes and configurations are available in 48mm, 64mm or
76mm diameters as shown below (others available to order) Installation:
• Available ragged/spiked for casting in or flanged for bolting down Barriers should be cast into concrete a minimum 300-400mm deep by
• Finishes available: galvanised, stainless steel, powder coated or paint- 300mm diameter or bolted where applicable to an existing concrete
ed (others to specific order) surface or similar.

64mm o.d 390 x 580mm above ground Flanged perimeter barrier Removable perimeter barriers

Perimeter barriers
Specification

o.d. Wall Additional Additional Length Height above Height below Weight Finish Material
(mm) thickness vertical horizontal (mm) ground ground (kg) grade steel
(mm) leg rail (mm) (mm)

48 3.2 no no 1000 500 300 10.0 Galvanised Mild

48 3.2 no no 2000 500 300 14.0 Galvanised Mild

48 3.2 no yes 2000 1000 300 23.0 Galvanised Mild

50 2 no no 750 750 300 9.0 Brushed 304 SS

50 2 no yes 1200 750 300 11.0 Brushed 304 SS

64 3.25 no no 390 580 300 8.0 Galvanised Mild

64 3.25 no no 1000 1000 400 21.0 Galvanised Mild

64 3.25 no no 2000 1000 400 26.0 Galvanised Mild

64 3.25 no yes 2000 1000 400 31.0 Galvanised Mild

76 3.65 no no 1000 1000 400 25.0 Galvanised Mild

76 3.65 yes no 2000 1000 400 32.0 Galvanised Mild

76 3.65 no yes 2000 1000 400 40.0 Galvanised Mild

Mild = Mild steel tube SS = Stainless steel

Many other heights and lengths (up to 2.5m) available - please ask for quotation

Street Furnishings Ltd Tel: 01189 404717 Fax: 01189 403216 27

 Portable Guardrailing

Portable guardrail

28 The one-stop shop for all highway professionals

 Column Protection

Column protection
Column protection units can be supplied in
diameters as low as 500mm and are an ideal,
cost-effective method of protecting lighting
columns, structural columns, racking supports
or similar.They are also available in a light-
weight monostrut construction that can be
installed down to as little as 400mm diameter.

Warehouse rail

Prefabricated column protector

Monostrut rail

Bolt-down bollards
Ideal for use as protection for
columns.

Street Furnishings Ltd Tel: 01189 404717 Fax: 01189 403216 29

 Rubber Barrier Protection

Rubber barrier protection systems

30 The one-stop shop for all highway professionals

 Flexible Bollards

Hercules flexible bollards

Hercules bollards are impact absorbing and can
deflect to an angle of 18o and still return to their
original position. Stylishly designed and incredibly
tough, Hercules are the ideal solution for protect-
ing doors, loading bays, machinery and personnel.

They can be surface mounted or cast in.

Flexi-bollards
Flexi-bollards provide single point impact
protection and are operational up to impacts
of five tonnes.With built-in EPDM impact
strips and high strength steel RSJ, the posts
are finished in a high visibility yellow to add
to the protection provided.

All dimensions in mm

Street Furnishings Ltd Tel: 01189 404717 Fax: 01189 403216 31

 Car Park Crash Barriers

Armco barrier Usually, untensioned beams are mounted on

The untensioned system is designed only for 125mm x 90mm steel ‘Z’ section posts manu-
use in situations where speed limits do not factured from stock 6mm thick steel.
exceed 50 mph.
Normal spacing of posts is 3.2m for unten-
Specification: sioned safety fences, but post spacing can be
The main beams together with adjuster and reduced to 1.6m centres for improved pro-
anchorage beams are formed from stock tection at special hazards or where situations
3mm thick steel complying with BS EN 10 restrict deflection.
025 Grade Fe 430A. Each standard beam has
a 3.5m overall length (3.2m effective) and a For projects such as car parks, loading bays,
nominal depth of 310mm. etc. stronger SHS posts or special mounting
brackets are available.
There is no restriction on the installation
lengths of untensioned safety fence beams,
but all approach and depart ends must be
taken down to ground level with the use of a
formed beam and terminated with an end
shoe, subsequently filled with concrete.

Alternatively, untensioned beams can be tran-

sitioned to the open box beam series if it is
intended to terminate the safety fence at a
bridge parapet or structure.

32 The one-stop shop for all highway professionals

 Rigid steel barrier posts • Car parks
In car parks or loading areas where vehicle contact is more frequent • Logistics depots
but less severe, a more rigid support is required. Rigid steel posts • Protecting structures
mounted in concrete provide an answer. Specially fabricated bolt-down
posts are required when barriers are mounted on bridge decks, floor
slabs or foundation blocks.

All dimensions in mm

Rigid steel posts

Typical arrangement at RSJ post in
concrete surround.

P224 Type 3/1.1 P224 Type 3/1.5

A B C A B C

600 430 500 800 630 700

Bolt down post

P224 Type 1* P224 Type 2

A B A B

610 440 760 570

*Car park height

‘Z’ section posts

125 x 90 x 6mm ‘Z’ post, available in 1225mm
lengths. Suitable for general contracts and for
use with offset bracket.

125 x 90 x 5mm ‘Z’ post, available in 1220mm

lengths.

Street Furnishings Ltd Tel: 01189 404717 Fax: 01189 403216 33

 Car Park Crash Barriers (continued)

Flexi-post diagram

All dimensions in mm

Spring steel buffers

Designed to absorb impact loads of up to 40 tonne
heavy goods vehicles, these buffers will significantly
reduce barrier replacement and maintenance cost.

34 The one-stop shop for all highway professionals

 Accessories

Pedestrian
terminal end

Pedestrian terminal end pieces

make the transition from a deeply
corrugated section with sharp
ends to a safe, tubular profile with
no protruding sharp edges and fit-
ted plastic end caps.They are used
Bullnose end primarily at the exit ends of park-
Flexible external corner ing spaces to protect pedestrians
from injury.

Plastic end cap

Internal corner
connector
Flexible

Rigid external
corner
Connector also available

All dimensions in mm

Flexi-post (continued on next page)

Flexi-post barriers are manufactured using an unten-

sioned beam attached to flexible floor mounted posts.
The unique engineered design allows them to be used
for absorbing an impact of up to 10 tonnes. Extremely
strong, easy to install and with a long operational life,
Flexi-posts are the perfect protectors of people, plant
and infrastructure.

Street Furnishings Ltd Tel: 01189 404717 Fax: 01189 403216 35

 Traffic Flow Plates

Restrictor traffic flow plates Technical specification:

Provide a robust and cost-effective means of controlling The Restrictor traffic flow plate has been designed to
vehicle traffic. provide a low cost answer to the problem of directional
vehicle flow. Manufactured from heavy gauge steel plate
Key features: and load bearing road surface plates constructed from
• Robust construction 12mm durbar plate.The sub surface road box having
• Ease of installation external anchor plates for securing into the supporting
• Manual operation concrete bed, a removable road surface plate is provided
• Durable coating specification to allow access to the bearings and buffer pads.
• Modular design
This entirely mechanical, gravity controlled unit requires
no external power source thus being low in capital and
Benefits: running costs and requiring minimal maintenance.
• Low maintenance
• Cost-effective • 5mph maximum speed advised
• Spares availability • Maximum load 7.5 tonnes
• Sub-surface parts galvanised.Top plates galvanised and
painted yellow
• Weight 26kg/unit

36 The one-stop shop for all highway professionals

 Heavy duty traffic flow plates
Within any industrial or commercial site, car park or similar location there is a
need to implement an effective traffic management system.Without any form of
traffic control there is a security risk to the organisation, a risk of damage to other
vehicle drivers and a risk of injury to pedestrians. A series of traffic flow plates
offers a cost-effective solution to any traffic control problem. Designed for strength
and durability, these traffic flow plates encourage a one-way traffic flow and prevent
unauthorised entry/exit within any location, thereby enabling vehicle movement to
be managed at all times.

With a heavy duty steel construction, these traffic flow plates can be used for any
type of vehicle application, including HGVs.They have been uniquely designed to
withstand the rigours of all types of road vehicle over an extended period and thus
capable of giving long-term effective operation with only minimal maintenance.

It is important that warning signs and speed restriction units are installed in con-
junction with traffic flow plates.

Specification:
Dimensions: 250mm cube
Flap height: 110mm
Recommended speed: Not to
exceed 10mph
Base material: Heavy duty steel
plate
Top plate material: 8mm durbar
steel
Finish: Galvanised primed & painted
yellow

Surface mounted It is recommended that warning signs

and speed restriction units are used in
traffic flow plates conjunction with traffic flow plates.
An extremely strong and reliable unit
designed for ultimate strength and • Deters unauthorised entry/exit
reliability. It encourages one-way traf- • Encourages one-way traffic flow
fic flow and deters unauthorised • Rapid installation
entry/exit. • Low maintenance - no on-going
charges
The surface mounted traffic flow • Galvanised units available
plates offer a cost-effective solution • Greater security and traffic control
to traffic control issues where stan- • Effective vehicle management
dard fixed traffic flow plates cannot • Reduced cost
be used. Suitable for multi-storey car • Increased durability and wear
parks or where excavations cannot
take place.

Specification:
Dimensions: 255mm x 430mm
Raised height: 115mm
Recommended speed: Not to
exceed 10mph
Base material: Heavy duty steel plate
Top plate material: 8mm durbar steel
Finish: Primed & painted yellow
Optional finish: Galvanised

Installation:
Surface mounted traffic flow plates
can be bolted to concrete or tarmac
using special fixings which can be
supplied.

Street Furnishings Ltd Tel: 01189 404717 Fax: 01189 403216 37

 Speed Ramps

BeeBump
A highly effective means of controlling traffic speeds. 50mm high slows to
10mph, 75mm high slows to 5mph.

• The modular system is formed from black and bright yellow segments made
from heavy duty recycled PVC
• White reflectors in each section - excellent night time and bad weather visi-
bility
• Both ends and inners are available in black and yellow
• Quick and easy to install by just one person with a drill and spanner
• All segments are sold separately
• Ramps of any length can be formed simply by combining modular sections

Speed restriction signs should be placed in a clearly visible position ahead of

any ramp location. Dimensions & weights of
components:

50mm high inner segments:

weight 8.0kg, length 500mm, width 420mm

50mm high shoulder pieces:

weight 2.2kg, length 210mm, width 420mm

75mm high inner segments:

weight 13.0kg, length 500mm, width 420mm

75mm high shoulder pieces:

Bolts and “dog bone” fixings included at no extra charge
weight 3.2kg, length 210mm, width 420mm

BeeBump size chart

Component parts

With shoulders Without shoulders

Overall (eg kerb to kerb)
length
of Inner Inner Shoulder Shoulder Inner Inner
ramp (yellow) (black) (yellow) (black) (yellow) (black)
2.5m 2 2 1 1 3 2
3.0m 3 2 - 2 3 3
3.5m 3 3 1 1 4 3
4.0m 4 3 - 2 4 4
4.5m 4 4 1 1 5 4
5.0m 5 4 - 2 5 5
5.5m 5 5 1 1 6 5
6.0m 6 5 - 2 6 6

38 The one-stop shop for all highway professionals

 Road Markings, Road & Bay Marking Studs

Flexline preformed
thermoplastic road markings
• Wide range of colours
• Material can be formulated for hot or cold climates
• Can be laid easily onto coloured anti-skid surfacing
• Reflective glass beads can be applied during heating
• Black Flexline can be used to black out existing markings
• Ideally suited for maintaining existing markings

Accessories
Tack Coat, gas torches and other
Contractors Specialised associated equipment available.
spray paint logos & images
The contractor’s answer to
economic temporary mark-
ing.

• 728ml aerosol
• Temporary line and spot
marker for low wear
applications
• Fast drying

Maintenance paint
We are able to supply any BS colour paint for use in the mainte-
nance of your highway products e.g. bollards, posts.

Stainless steel tactile studs Brass tactile studs Brass boundary studs

Stainless steel roadstuds

Each stud is made from austenitic stainless steel
(18% chrome, 8% nickel) specially heat treated
which ensures maximum toughness, strength and
rust resistance. Available with either fishtail or
chisel shank designed and shaped to prevent
twisting after installation.To assist skid resistance
a serrated face is also available (chisel shank
only). A superior quality roadstud appropriate Measurements, types & weights
for any type of road surface, its durability pro- Surface of stud Shank Nett weight
vides excellent cost effectiveness. of stud (approx)
Metal Head Nominal Type Shape mm Grams
shape measurements
Aluminium roadstuds mm
Each stud is cast from aluminium alloy conform- Stainless Square 100x100 Plain face Chisel 70±6 700
ing to BS1490:1988. Supplied with a raised pro- Steel
file to assist skid resistance and fishtail shank. Stainless Square 100x100 Plain face Fishtail 70±6 700
Suitable for most road surfaces - a cheaper Steel
short-term alternative to the stainless steel type Stainless Square 100x100 Serrated Chisel 70±6 700
when a compromise on quality is a necessity. Steel face
Aluminium Square 100x100 Raised Fishtail 70±6 210
All studs conform to BS873 Part 4. profile

Street Furnishings Ltd Tel: 01189 404717 Fax: 01189 403216 39

 Industrial & Traffic Mirrors

Industrial mirrors
Industrial mirrors made of modern plastic materials have a long life and resist
impact.You can choose between impact-resistant acrylic (AC) or virtually unbreak-
able polyester (PET).

The mirrors are supplied with a zinc-plated bracket for mounting on a standard 50-
76mm pole or on a wall.There are also models which are heated electrically to pre-
vent moisture and ice formation.

An industrial mirror in the right place can help prevent accidents and provides
greater safety when vision is blocked e.g. in truck aisles and narrow exits.The mir-
rors can also be used for security and monitoring automatic machines and convey-
ors. Since they are impact-resistant or virtually unbreakable, they are ideal for food
and process industries.

Industrial mirror I-94

Holder

Rear view Industrial mirror I-94

Industrial mirror
Part no. Type Size Weight Observing Material
(mm) (kg) distance (m)
SF-14-34050 I-94 Ø500 2.4 10 AC
SF-14-34060 I-94 Ø600 3.2 12 AC
SF-14-34080 I-94 Ø800 5.4 18 AC
SF-14-34046 I-94 400x600 3.2 12 AC
SF-14-34068 I-94 600x800 7.4 18 AC
SF-14-34250 I-94 Ø500 2.4 10 PET
SF-14-34260 I-94 Ø600 3.2 12 PET
SF-14-34280 I-94 Ø800 5.4 18 PET
SF-14-34246 I-94 400x600 3.2 12 PET
SF-14-34268 I-94 600x800 7.4 18 PET

Designed for monitoring machines, warehouses, truck aisles, parking lots,

etc. in industry. Packed individually with a bracket.

40 The one-stop shop for all highway professionals

 Traffic mirrors
Traffic mirrors made of modern plastic materials are strong and will have a long life.You
can choose between impact-resistant acrylic (AC) or virtually unbreakable polyester (PET).
The frame is made of a reflecting Class 2 material to emphasise that the mirror is a traffic
aid.

The mirrors are supplied with a zinc-plated bracket for mounting on a standard 50-76mm
post or on a wall.There are also models which are heated electrically to prevent moisture
and ice formation.

Traffic mirrors offer greater safety when vision is restricted - in built-up areas, opposite
driveways and at intersections.They improve vision and thus safety of all road users. Since
an outdoor environment naturally makes special demands, the mirrors are made of a plas-
tic material which guarantees a long life under particularly difficult weather conditions.

Traffic mirror T-97

Traffic mirror T-97

Traffic mirror
Part no. Type Size Weight Observing Material
(mm) (kg) distance (m)
SF-14-34146 T-97 400x600 3.6 12 AC
SF-14-34168 T-97 600x800 7.9 18 AC
SF-14-34160 T-97 Ø600 3.5 12 AC
SF-14-34180 T-97 Ø800 5.8 18 AC
SF-14-34346 T-97 400x600 3.6 12 PET
SF-14-34368 T-97 600x800 7.9 18 PET
SF-14-34360 T-97 Ø600 3.5 12 PET
SF-14-34380 T-97 Ø800 5.8 18 PET

Designed to improve visibility for road users at intersections, on sharp

curves, opposite driveways, etc. Packed individually with a bracket.

Street Furnishings Ltd Tel: 01189 404717 Fax: 01189 403216 41

 Wheel Clamps

Wheelok wheel clamp range Super model ‘A’

• Security of vehicles and forecourt areas.
• Control of illegal parking

All vehicles are at risk from theft, be they on garage forecourts,

business premises, private car parks, public car parks or the pri-
vate driveway at home. Nowhere is safe.

To prevent your vehicles falling easy victim to theft, you can now
deter the thief with a wheel clamp from the Wheelok range.
Government Home Office approved since 1983 and insurance
company recommended, the Street Furnishings Wheelok range
has wheel clamps to fit virtually any vehicle including trailers, cara-
vans, cars, vans and HGVs.

Your vehicles deserve the best protection - choose Wheelok, the

professional’s choice for vehicle security.
Colour: Yellow
As towns and cities become more congested with vehicles, park- Lock: Integral lock
ing regulations are being enforced in more and more locations Weight: 16kgs
with Wheelok wheel clamps. Introduced in 1983 for use by the To fit tyres: 145-195 width
Wheels 13” 14”
London Metropolitan Police to control illegal parking, this model
Accessories: Swivel chock to fit twin
clamp is being adopted by many local authorities to enforce on- axle caravans, trailers,
street parking regulations. etc. Close fitting hook
arm for caravans, trail-
On private property, store complexes, colleges, universities and ers and other vehicles
hospital car parks there is misuse by the casual parker which can with close fitting low
be reduced by the Street Furnishings Wheelok range of wheel wheel arch trims.
clamps. Applications: A versatile model for
cars, vans, caravans &
trailers

Police model II HGV model ‘C’

Colour: Yellow Colour: Yellow

Lock: Padlock Lock: Padlock
Weight: 24kgs Weight: 63kgs
To fit tyres: 165-265 width To fit tyres: Small HGV dia. 33” to
Wheels 14” 15” 16” 42.5” in height
Accessories: Extended hook arms to Large HGV dia. 36” to
fit tyres greater than 45.5” in height
27” in height and up to Tyre width 10.25” to
11.5” wide. 15.25”
Applications: Control of illegal park- Applications: Vehicle security of
ing. Also used for high HGVs, large trucks, trail-
security of cars, vans, ers, coaches, JCBs, etc.
plant hire machinery
and up to 7.5 tonne
trucks.

42 The one-stop shop for all highway professionals

 The Professional wheel clamp
Street Furnishings innovative world-beating Professional wheel
clamp range offers a solution to every enforcement need. Our
clamps are designed with the needs of the professional user in
mind.The accent is on ease of use, coupled with unparalleled
security.

No. 1 clamp in the UK market, the Professional offers superi-

or performance to meet the demanding needs of the profes-
sional operator.The Professional will enable your team to
clamp any vehicle from a Mini to a Range Rover.The wheel
clamp will fit tyre sizes from 145 to 225.

• Home Office Approved

• In use by DVLA, Councils and major car park operators
• Robust and extremely strong
• Quick, silent and easy to use - 30 seconds to fix
• No assembly - the Professional comes in two main parts
ready to use
• Light & compact - takes up less than 1 cubic ft of storage
• Supplied complete with high security lock

Full fitting instructions

Street Furnishings Ltd Tel: 01189 404717 Fax: 01189 403216 43

 W ith a highly knowledgeable sales team available to assist with any project at any
stage from design through implementation and to completion, and access to a wide range
of production facilities, we are committed to providing the complete supply service to our
customers.

Based in Berkshire at the heart of the motorway network of the M4, M40 and M25, Street
Furnishings Ltd is ideally placed for rapid dispatch of goods from its well stocked
warehouse to all parts of the United Kingdom and Ireland - from the Channel Islands to
the north of Scotland and from East Anglia to the west of Ireland.

Contact the sales office to speak to people who understand the needs of governmental
and local authorities as well as contractors. Or visit the web site for more details of our
extensive product range.

The Guild of
Master Craftsmen STREET FURNISHINGS LTD

Certificate of
Festival House • Mumbery Hill • Wargrave • Berkshire • RG10 8EE Member of the Guild
Quality & Service Tel: 01189 404717 • Fax: 01189 403216 • Email: [email protected] of Master Craftsmen

www.streetfurnishings.co.uk