MGS0100P (JD) r2
MGS0100P (JD) r2
MGS0100P
POWER RATING (0.8 P.F.)@380V
STAND-BY 88 kVA
PRIME 79 kVA
Voltage Variation
■ Standard Voltage 3Phase 4 Wires
380V
■ Voltages Available 3Phase 4 Wires
380, 400, 415, and 220V
Note: Outputs for optional voltages may differ from standard output mentioned above.
Prime:
Applicable for supplying power to varying load for unlimited time instead of the utility.
Prime power (PRP) is in accordance with ISO8528.
10% overload is available for 1 hour in any 12 hour period in accordance with ISO 3046.
Conditions:
Engine ratings apply at ISO3046/1.
Fuel rates: based on ASTM D975.
Bore mm 106
Stroke mm 127
Displacement L 4.5
Compression ratio 17.0
Lubricating oil capacity L 13.2
Coolant capacity without radiator L 8.5
3
Cooling fan airflow rate m /min 108
Ambient air temperature ℃ 40
Fuel oil tank capacity L 240
STAND-BY PRIME
88 kVA T 79 kVA
Gross Engine Power* kWm 83 A
Brake mean effective pressure MPa 1.5 N
Noise Level at 1 m dB(A) 85 D
Fuel consumption load 110 % (=Standby output) L/hr. 25.3 -
Fuel consumption load 100 % (=Prime output) L/hr. 22.9 B
Fuel consumption load 75% L/hr. 16.5 Y
3
Combustion air inlet flow rate m /min 6.1
3
Exhaust gas flow rate m /min 13.6
Exhaust gas temperature ℃ 600
* WITHOUT FAN basis.
Warning
Over speed Under speed
Over generator frequency Under generator frequency
Over generator voltage Under generator voltage
High battery voltage Low battery voltage
Fail to stop Charge fail
Oil pressure sensor open circuit Coolant temperature sensor open circuit
Coolant level low
■ Operation status indicated by LED
Mains available Generator available
Mains on load Generator on load
MITSUBISHI MGS SERIES
DIESEL GENERATOR SET
MGS0100P
■ Other accessories
Low and high fuel level alarm
Tool kit for maintenance
1,500/3,000 hours maintenance kit
All canopy parts are designed with modular principles Thermally insulated engine exhaust system
Without welding assembly Easy lifting and moving
Doors on each side Easy maintenance and operation
All metal canopy parts are painted by electrostatic polyester powder paint
Exhaust silencer is protected against environment influences
Emergency stop push button is installed outside of the canopy
Mitsubishi Heavy Industries Engine System Asia Pte Ltd, serves for the customers with improved products continually.
Therefore specification and some materials will be changed without notice.
The International System of units (SI) is used in this publication.