Scribd
Upload
9K views2 pages

SAME SILVER Error Codes

This document contains a list of 76 alarm codes, messages, and descriptions for a tester of an industrial machine. The alarms are grouped by codes ranging from 11-46, 51-56, 61-64, and 71-76. The codes indicate issues with electro-valves, sensors for temperature, speed, pressure, and position, as well as short circuits, open circuits, component failures, configuration errors, and loss of hydraulic pressure.

Uploaded by

Stroe Sergiu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
9K views2 pages

SAME SILVER Error Codes

This document contains a list of 76 alarm codes, messages, and descriptions for a tester of an industrial machine. The alarms are grouped by codes ranging from 11-46, 51-56, 61-64, and 71-76. The codes indicate issues with electro-valves, sensors for temperature, speed, pressure, and position, as well as short circuits, open circuits, component failures, configuration errors, and loss of hydraulic pressure.

Uploaded by

Stroe Sergiu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

LIST OF ALARMS

CODES MESSAGE on the TESTER DESCRIPTION


11 "EvL State No OK" Failure of the low range Elecro-valve
12 "EvL ShortCircuit" Short-Circuit of the low range Electro-valve
13 "EvL Open Circuit" Disconnected low range Electro-valve
14 "Sens. RPM Open" Disconnected engine speed sensor
15 "Sns.Tmp Oil Open" Disconnected oil temperature sensor "Sns.Tmp Oil S.C." Short-
Circuit oil temperature sensor
16 "Direct.Lev. Open" Disconnected direction commands on the armrest "Direct.Lev. S.C."
Short-Circuited direction commands on the armrest "Direct.Lev. N. V." Disconnected
direction commands on the armrest
21 "EvM State No OK" Failure of the medium range Elecro-valve
22 "EvM ShortCircuit" Short-Circuit of the medium range Electro-valve
23 "EvM Open Circuit" Disconnected medium range Electro-valve
24 "Sens.Wheel Open" Disconnected speed sensor
25 "Display Fault" Disconnected or broken led bar. This message is only dysplayed by the
tester
26 "SteeringN/C Open" Consent/neutral command signal disconnected "SteeringN/C S.C."
Consent/neutral command signal short-circuited
31 "EvH State No OK" Failure of the high range Elecro-valve
32 "EvH ShortCircuit" Short-Circuit of the high range Electro-valve
33 "EvH Open Circuit" Disconnected high range Electro-valve
34 "Sens. Revrs Open" Disconnected inverter speed sensor
35 "Pos. Pedal open" Disconnected clutch pedal sensor "Pos.Ped.S.C./Open" Disconnected or
short-circuited clutch pedal sensor "Pos. Pedal N.V." Broken clutch pedal sensor
36 "SteeringF/B Open" Direction command signal disconnected "SteeringF/B S.C." Direction
command signal short-circuited "SteeringF/B N.V." Broken direction command button
41 "HML+ButtonPushed" Damaged HML increase button
42 "HML-ButtonPushed" Damaged HML increase button
43 "Missed Power Inf" Absence of engine power signal
44 "EvP State No OK" Failure of the proportional Electro-valve
45 "Pos.Ped. “B” Open" Disconnected clutch pedal sensor
46 "ShortCirc.Buzzer" Short-Circuited connection to the beeper
51 "EvD State No OK" Failure of the directional Electro-valve
52 "EvD ShortCircuit" Short-Circuit of the directional Electro-valve
53 "EvD Open Circuit" Disconnected directional Electro-valve
54 EvP ShortCircuit" Short-Circuit of the proportional Electro-valve
55 "HMLrelay St.N.V." Internal failure to the ECU (PWM or HML relay) "S.C. HML Power"
"REVrelay St.N.V." "S.C. REV Power" "Polarizz.Com.REV" " Alim. Amplif. opr"
"ClutchPedalSens"
56 "EvP Open Circuit" Disconnected proportional Electro-valve
61 "ServicePrxMissed" Loss of main hydraulic service pressure. Failure in the hydrau
62 "PressureProport" Low pressure after the proportional electro-valve. Sen proportional
Electro-valve failure
63 "E2PROM Fault" Replace the E2PROM
64 "Configurat.Error" Program configuration error. Check the setting of the Group Electro-
valves
71 "Sens.Revrs C.C." Short-Circuited inverter speed sensor
72 "Sens.RPM C.C." Short-Circuited engine speed sensor
73 "Slip Clt. Revrs" High slippage of the inverter clutch
74 "Miss PrssProprt" Low pressure after the proportional Electro-valve. Sen proportional
Electro-valve failure
75 "S.C. HML Group" HML Group Short-Circuited.Check in the wiring
76 "S.C. REV Group" Short-Circuited inverter Group. Check the wiring
VIII

You might also like