Scribd
Upload
66 views

0000 PDF

The document contains calculations and results from experiments measuring flow rate for a broad crested weir. It includes the calculated theoretical flow rate (Qth), measured actual flow rate (Qact), and discharge coefficient (Cd) for different water heights (H) and weir heights (h). The calculations show Qth is proportional to the weir height and square root of the water head, while Qact is measured as volume over time.

Uploaded by

soran najeb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
66 views

0000 PDF

The document contains calculations and results from experiments measuring flow rate for a broad crested weir. It includes the calculated theoretical flow rate (Qth), measured actual flow rate (Qact), and discharge coefficient (Cd) for different water heights (H) and weir heights (h). The calculations show Qth is proportional to the weir height and square root of the water head, while Qact is measured as volume over time.

Uploaded by

soran najeb
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Calculations: exp 7

B=8.5 cm p=10 cm 𝑄𝑡ℎ = ℎ ∗ 𝑏 ∗ √2𝑔(𝐻 − ℎ) 𝑄𝑎𝑐𝑡 = 𝑉/t cd=𝑄𝑎𝑐𝑡/ 𝑄𝑡ℎ

Mater= cm .10-2 liter= m3.10-3


𝟎.𝟎𝟎𝟓
Q act = = 4.897*10-4 m3/s
𝟏𝟎.𝟐𝟏

Qth = 0.085 * 0.0135* √ (2*9.81(0.0215 – 0.0135)) =2281 *10-3 m3/s


𝟒.𝟖𝟗𝟕∗𝟏𝟎−𝟒
Cd = 𝟐𝟐𝟖𝟏 ∗𝟏𝟎^−3 = 0.214

Results for Broad Crested Weir

H (cm) h (cm) Time (s) V (L) 𝑄𝑡ℎ m3/s 𝑄act m3/s Cd

2.15 1.35 10.21 5 2281 *10-3 4.81*10-4 0.214

2.8 1.75 8.43 5 6.75 *10-4 5.931*10-4 0.878

3.3 2 6.42 5 8.59 *10-4 7.788*10-4 0.906

3.85 2.35 4.86 5 5.319 *10-3 1.028*10-3 0.951

4.2 2.7 3.58 5 6.372 *10-3 1.396*10-3 0.219

4.65 2.9 2.93 5 7.209 *10-3 1.706*10-3 0.236

You might also like