Scribd
Upload
42 views

Awais Lab Report 1

Muhammad Awais khalid submitted a lab report to Sir Husnain Asif analyzing various digital logic gates and circuits. The report included simulations of an AND gate, OR gate, NOR gate, NAND gate, NOT gate, XOR gate, and XNOR gate. It also described building an alarm system circuit responding to 3 input signals and simulating a PLC motor controller with a start button and two stop buttons.

Uploaded by

سید کاظمی
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
42 views

Awais Lab Report 1

Muhammad Awais khalid submitted a lab report to Sir Husnain Asif analyzing various digital logic gates and circuits. The report included simulations of an AND gate, OR gate, NOR gate, NAND gate, NOT gate, XOR gate, and XNOR gate. It also described building an alarm system circuit responding to 3 input signals and simulating a PLC motor controller with a start button and two stop buttons.

Uploaded by

سید کاظمی
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 11

Lab Report No.

Submitted To:
Sir Husnain Asif
Submitted By:
Muhammad Awais khalid
ID:180500
Class: Power 5B
Task 1:

And Gate:

Stimulation:
Task 2:

OR gate:

Stimulaton:
Task 3:

Nor Gate:

Stimultion:
Task 4:

NAND Gate:

Stimulation:
Task 5:

Not Gate:

Stimulation:
Task 6:

XOR Gate:

Simulation:
Task 7:

XNOR Gate:

Stimulation:
Task 8:
Build an alarm system. Let's assume that we have 3 signals (Inputs) that we get from the field
that warn

us about some kind of fire danger.


Any 1 signal turn the warning light on;

Any 2 signals will sound the siren.

All 3 signals will start the water spray system.

Stimulation:

Task 9:
A PLC motor controller has a START button and two STOP buttons. The motor is to run if START
button is Pressed. Motor stops by depressing any STOP button stops. Construct a LAD for this motor
control task. Use the following symbols for the inputs and output:
Stimulation:

You might also like