Scribd
Upload
63 views

Laser Marking System: Vision Embesoft Solution

This document describes a laser marking system that offers permanent laser marking on almost any material. It uses a fiber laser with a 20W output and marking speeds up to 10,000 mm/sec. The laser marking process is non-contact, chemical-proof, and requires no pre or post processing. Laser marking provides a quality marking standard and helps reduce operating costs through lower labor, tooling, and setup times compared to other marking methods.

Uploaded by

Avadhoot Rajurkar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
63 views

Laser Marking System: Vision Embesoft Solution

This document describes a laser marking system that offers permanent laser marking on almost any material. It uses a fiber laser with a 20W output and marking speeds up to 10,000 mm/sec. The laser marking process is non-contact, chemical-proof, and requires no pre or post processing. Laser marking provides a quality marking standard and helps reduce operating costs through lower labor, tooling, and setup times compared to other marking methods.

Uploaded by

Avadhoot Rajurkar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Let’s Make Life Easier.....

Laser Marking System

Operation :
•Laser Marking
•Laser Engraving
VISION EMBESOFT SOLUTION
www.vesindia.org
Let’s Make Life Easier.....

Technical Specification

Laser Type Fiber Laser


Average/CW Output Power 20 W ( Optional 10W)
Pulse Repetition Rate 20-80 Khz
Wavelength 1062 ± 3 nm
Laser Class IV
Guide Laser/Red Aiming Beam Yes
Ambient Temperature 25 °C
Power Consumption < 1 kW
Electrical Connection (Optional) 230v/50 Hz - 115V/60 Hz
Marking area (Optional) Ø100/150/220 mm
Repeatability 50 Micron
Resolution 18 Micron
Marking Speed Up to 10000 mm/sec*

Machine Feature :
• It offers a non-contact, abrasion-resistant, permanent laser
mark onto almost any type of material.
• Clean and Safe process –Chemical-proof, water-proof, oil,
grease & fuel-proof.
• No pre or post processing – Can be done on finished products.
• Internationally Accepted as Quality Marking Standard.
• Visible ‘Pilot’ beam shows the marking location for fast,
accurate setup.
• Laser marking helps significantly in cutting operating cost by
reducing labor cost, tool cost, consumable cost, set up time,
rejection improved cycle time.
• One of the prime advantage of laser marking is that it can be
automized and can be integrated with any online process
VISION EMBESOFT SOLUTION

Head Office :
B-106,Electronic Estate, G.I.D.C., Branch Office :
Sector-25, Gandhinagar-382024.Gujarat. INDIA. Plot No-19,Nava Faliyu,
(O) 079 2975 0138, B/h Dholakiya Garden, Nr. Vala Vadi,
E-mail : [email protected], Katargam, Surat-395004. Gujarat.INDIA
[email protected], Mo.:90999 97900, (O) +91 261 2102888,
Website : www.vesindia.org E-mail : [email protected]

You might also like