0% found this document useful (0 votes)

114 views

Stinger Ref Guide PDF

Uploaded by

RODRIGO ALVES DA COSTA

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

114 views

Stinger Ref Guide PDF

Uploaded by

RODRIGO ALVES DA COSTA

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 330

Stinger Reference Guide

Part Number: 7820-0713-001

For software version 7.11
August 1999
Copyright© 1999 Lucent Technologies. All Rights Reserved.

This material is protected by the copyright laws of the United States and other countries. It may not be reproduced, distributed, or altered in any fashion by any
entity (either internal or external to Lucent Technologies), except in accordance with applicable agreements, contracts, or licensing, without the express
written consent of Lucent Technologies.

Notice

Every effort was made to ensure that the information in this document was complete and accurate at the time of printing. However, information is subject to
change.

Security Statement

In rare instances, unauthorized individuals make connections to the telecommunications network through the use of access features.

Trademarks

Ascend Access Control, Dynamic Bandwidth Allocation, FrameLine, Hybrid Access, MAX, MAX TNT, Multilink Protocol Plus, Pipeline, Secure Access,
and Series56 are trademarks of Lucent Technologies. Other trademarks and trade names mentioned in this publication belong to th eir respective owners.

Ordering Information

To order copies of this document, contact your Lucent Technologies representative or reseller.

Support Telephone Numbers

For a menu of support and other services, call (800) 272-3634. Or call (510) 769-6001 for an operator.

Lucent Technologies
Customer Service
Customer Service provides a variety of options for obtaining information about Lucent
products and services, software upgrades, and technical assistance.

Finding information and software on the Internet

Visit the Web site at http://www.ascend.com for technical information, product
information, and descriptions of available services.

Visit the FTP site at ftp.ascend.com for software upgrades, release notes, and addenda to
this manual.

Obtaining technical assistance

You can obtain technical assistance by telephone, email, fax, modem, or regular mail, as well
as over the Internet.

Enabling Lucent to assist you

If you need to contact Lucent for help with a problem, make sure that you have the following
information when you call or that you include it in your correspondence:
• Product name and model.
• Software and hardware options.
• Software version.
• If supplied by your carrier, Service Profile Identifiers (SPIDs) associated with your line.
• Your local telephone company’s switch type and operating mode, such as AT&T 5ESS
Custom or Northern Telecom National ISDN-1.
• Whether you are routing or bridging with your Lucent product.
• Type of computer you are using.
• Description of the problem.

Calling Lucent from within the United States

In the U.S., if you need to talk to an engineer right away, call (900) 555-2763 to reach the
Priority Call queue. The charge of $2.95 per minute does not begin to accrue until you are
connected to an engineer. Average wait times are less than three minutes.

For a menu of Lucent’s services, call (800) 272-363). Or call (510) 769-6001 for an operator.

Stinger Reference Guide iii

Calling Lucent from outside the United States
You can contact Lucent by telephone from outside the United States at one of the following
numbers:

Telephone outside the United States (510) 769-8027

Austria/Germany/Switzerland (+33) 492 96 5672
Benelux (+33) 492 96 5674
France (+33) 492 96 5673
Italy (+33) 492 96 5676
Japan (+81) 3 5325 7397
Middle East/Africa (+33) 492 96 5679
Scandinavia (+33) 492 96 5677
Spain/Portugal (+33) 492 96 5675
UK (+33) 492 96 5671
For the Asia Pacific Region, you can find additional support resources at
http://apac.ascend.com

Obtaining assistance through correspondence

Lucent maintains two email addresses for technical support questions. One is for customers in
the United States, and the other is for customers in Europe, the Middle East, and Asia. If you
prefer to correspond by fax, BBS, or regular mail, please direct your inquiry to Lucent’s U.S.
offices. Following are the ways in which you can reach Customer Service:
• Email from within the U.S.—[email protected]
• Email from Europe, the Middle East, or Asia—[email protected]
• Fax—(510) 814-2312
• Customer Support BBS (by modem)—(510) 814-2302

Write to Lucent at the following address:

Attn: Customer Service

Lucent Technologies Inc.
1701 Harbor Bay Parkway
Alameda, CA 94502-3002

iv Stinger Reference Guide

Contents

About This Guide ............................................................................. vii

What is in this guide................................................................................................................ vii
What you should know ........................................................................................................... vii
Documentation conventions.................................................................................................... vii
Documentation set.................................................................................................................. viii
Related publications............................................................................................................... viii

Chapter 1 Stinger Command Reference......................................................... 1-1

Chapter 2 Stinger Profile and Parameter Reference ..................................... 2-1

A............................................................................................................................................. 2-2
B ........................................................................................................................................... 2-36
C ........................................................................................................................................... 2-44
D........................................................................................................................................... 2-59
E ........................................................................................................................................... 2-71
F ........................................................................................................................................... 2-79
G........................................................................................................................................... 2-84
H........................................................................................................................................... 2-85
I ............................................................................................................................................ 2-88
L ......................................................................................................................................... 2-101
M ........................................................................................................................................ 2-114
N......................................................................................................................................... 2-125
O......................................................................................................................................... 2-129
P ......................................................................................................................................... 2-132
Q......................................................................................................................................... 2-145
R ......................................................................................................................................... 2-147
S ......................................................................................................................................... 2-165
T ......................................................................................................................................... 2-205
U......................................................................................................................................... 2-220
V......................................................................................................................................... 2-228
W ........................................................................................................................................ 2-234
Y......................................................................................................................................... 2-236

Chapter 3 Progress and Disconnect Codes................................................... 3-1

Progress codes........................................................................................................................ 3-1
Disconnect-cause codes ......................................................................................................... 3-3

Index.......................................................................................... Index-1

Stinger Reference Guide v

About This Guide

What is in this guide

This guide provides an alphabetical reference to all the Stinger profiles, parameters, and
commands, and details the settings and options you can specify.

Note: This manual describes the full set of features for Stinger units running software version
7.11. Some features might not be available with earlier versions or specialty loads of the
software.

! Warning: Read the safety instructions in the hardware installation guide before installing the
product.

What you should know

This guide is intended for the person who will configure and maintain the Stinger. To use it
effectively, you must have a basic understanding of Stinger security and configuration, and be
familiar with authentication servers and networking concepts.

Documentation conventions
Following are all the special characters and typographical conventions used in this manual:

Convention Meaning
Monospace text Represents text that appears on your computer’s screen, or that could
appear on your computer’s screen.
Boldface mono- Represents characters that you enter exactly as shown (unless the char-
space text acters are also in italics—see Italics, below). If you could enter
the characters but are not specifically instructed to, they do not appear
in boldface.
Italics Represent variable information. Do not enter the words themselves in
the command. Enter the information they represent. In ordinary text,
italics are used for titles of publications, for some terms that would
otherwise be in quotation marks, and to show emphasis.
[] Square brackets indicate an optional argument you might add to a
command. To include such an argument, type only the information
inside the brackets. Do not type the brackets unless they appear in bold
type.
| Separates command choices that are mutually exclusive.

Stinger Reference Guide vii

About This Guide
Documentation set

Convention Meaning
> Points to the next level in the path to a parameter or menu item. The
item that follows the angle bracket is one of the options that appears
when you select the item that precedes the angle bracket.
Key1-Key2 Represents a combination keystroke. To enter a combination key-
stroke, press the first key and hold it down while you press one or
more other keys. Release all the keys at the same time. (For example,
Ctrl-H means hold down the Control key and press the H key.)
Press Enter Means press the Enter, or Return, key or its equivalent on your com-
puter.
Note: Introduces important additional information.

! Warns that a failure to follow the recommended procedure could result

Warning: in loss of data or damage to equipment, or physical injury.

Warns that a failure to take appropriate safety precautions could result

Warning: in electrical shock.

Documentation set
The Stinger documentation set consists of the following manuals:
• Stinger Hardware Installation Guide. Describes how to install the Stinger hardware.
Includes technical specifications and architectural overview.
• Stinger Configuration Guide. Describes how to configure VPI/VCI pairs, Connection
profiles, management interfaces, and QoS.
• Stinger Reference Guide (this manual). An alphabetic reference to all Stinger profiles,
parameters, and commands.
• Stinger Administration Guide. Contains operation and maintenance information.
• TAOS Command Line Interface Guide. Shows you how to use the Stinger command-line
interface effectively.

Related publications
This guide and documentation set do not provide a detailed explanation of products,
architectures, or standards developed by other companies or organizations. The following
sections list some publications that you might find useful.

ITU-T recommendations
ITU-T recommendations (formerly CCITT) are available commercially. You can order them at
http://www.itu.ch/publications/.

viii Stinger Reference Guide

About This Guide
Related publications

Related books
The following books are available in technical bookstores.
• Routing in the Internet, by Christian Huitema. Prentice Hall PTR, 1995. Recommended
for information about IP, CIDR, IP multicast, and mobile IP.
• SNMP, SNMPV2 and RMON: Practical Network Management, by William Stallings.
Addison-Wesley, 1996. Recommended for network management information.
• TCP/IP Illustrated, volumes 1&2, by W. Richard Stevens. Addison-Wesley, 1994.

Stinger Reference Guide ix

Stinger Command Reference
1
The information contained here is designed for quick reference, and does not include tutorials.
All commands are listed alphabetically. For an overall alphabetic listing, see the general table
of contents.

You can display a usage summary for any command by entering a question mark and the name
of the command:
admin> ? command-name

For an alphabetic list of commands, just enter a question mark:

admin> ?

The command line accepts a maximum of 80 characters, including the prompt.

Note: If the list of commands displayed as output does not include all of the commands
described in this chapter, you might need to authenticate a User profile that has more extensive
permissions. For details, see “Auth” on page 1-6.

?
Description: Displays a list of all available commands, or help text about a specific
command. A list of all available commands also shows the permission level required for the
use of each command.

Permission level: User

Usage: ? [-a]|[command-name]

Option Description
–a List all commands. (Without this option, the list includes only commands
authorized by the current User profile.)
command-name Display information about the specified command.

Stinger Reference Guide 1-1

Stinger Command Reference
?

Example: To display a list of commands authorized for your current login:

admin> ?
? ( user )
atmtrunkreset ( diagnostic )
atmtrunks ( system )
auth ( user )
clear ( user )
clock-source ( diagnostic )
clr-history ( system )
connection ( system )
date ( update )
debug ( diagnostic )
delete ( update )
device ( diagnostic )
dir ( system )
dircode ( system )
ether-display ( diagnostic )
fatal-history ( system )
format ( code )
fsck ( code )
get ( system )
help ( user )
if-admin ( diagnostic )
[More? <ret>=next entry, <sp>=next page, <^C>=abort]

To display help text about a command:

admin> ? dir
dir list all profile types
dir profile-type list all profiles of the specified type
dir profile-type profile-index list the specified profile
instance

Dependencies: The current security level is set by the current User profile and determines
which commands are displayed in response to the ? command. If the current User profile does
not have sufficient privileges to execute a command, that command is not displayed unless you
include the -a option. By default, commands with the User security level are always
displayed. For details, see “Auth” on page 1-6.

1-2 Stinger Reference Guide

Stinger Command Reference
ARPtable

ARPtable
Description: Displays or modifies the Stinger Address Resolution Protocol (ARP) table. Each
entry in the ARP table associates a known IP address with a physical address. For remote IP
addresses, the Stinger can use the ARP table to respond with its own MAC address to ARP
requests.

Permission level: System

Usage: arptable [-a IP_address MAC_address]|

[-d IP_address]|[-f]

Option Description
–a IP_address Add an ARP table entry for the device with the specified IP address
MAC_address and MAC address.
-d IP_address Delete the ARP table entry for the device at the specified IP address.
-f Clear the ARP table.

Example: To display the ARP table:

admin> arptable
IP Address MAC Address Type IF
Retries/Pkts/RefCnt Time Stamp
10.103.0.2 00:C0:7B:7A:AC:54 DYN 0 0/0/552
22760
10.103.0.220 00:C0:7B:71:83:02 DYN 0 0/0/2791
22760
10.103.0.1 08:00:20:7B:24:27 DYN 0 0/0/4296
22811
10.103.0.8 00:00:0C:05:B3:A2 DYN 0 0/0/6493
23058
10.103.0.7 00:00:0C:76:58:4E DYN 0 0/0/6572
23233
10.103.0.49 00:C0:80:89:19:95 DYN 0 0/0/397
23208

Stinger Reference Guide 1-3

Stinger Command Reference
ATMTrunkReset

The ARP table displays the following information:

Column Description
IP Address The address contained in ARP requests.
MAC Address The MAC address of the host.
Type How the address was learned, that is, dynamically (DYN) or by speci-
fication of a static route (STAT).
IF The interface on which the Stinger received the ARP request.
Retries The number of retries needed to refresh the entry after it timed out.
Pkts The number of packets sent out to refresh the entry after it timed out.
RefCnt The number of times the Stinger consulted the entry.
Time Stamp The number of seconds since the system has come up. The Stinger
updates this column every time an ARP entry is refreshed.

To add an ARP table entry for a device with the physical address 00A024A61535 at IP address
10.9.8.20:
admin> arptable -a 10.9.8.20 00A024A61535

Permission level: Diagnostic

Usage: atmtrunkreset [-17|-18]

Option Description
no argument Display options.
-17 Reset TM 1.
-18 Reset TM 2.

1-4 Stinger Reference Guide

Stinger Command Reference
ATMtrunks

ATMtrunks
Description: Displays Asynchronous Transfer Mode (ATM) trunk use.
Permission level: System

Usage: atmtrunks [-a|-d|-f|-u]

Option Description
no argument Display options.
-a Display all ATM trunks.
-d Display all disabled ATM trunks.
-f Display all free ATM trunks.
-u Display all ATM trunks in use.

Example: To display all ATM trunks:

All OC3 ATM trunks:
OC3 Lines (dvOp dvUpSt dvRq sAdm nailg)
Line { 1 17 1 } (Up Idle UP UP 00801)
Line { 1 17 2 } (Up Idle UP UP 00802)

The data displayed includes the physical address of each line and the following information:

Column Description
dvOp The current operational state of the line:
• Down indicates that the line is in a nonoperational state.
• Up indicates that the line is in normal operations mode.
dvUpSt The status of the line in normal operations mode:
• Idle indicates that no call is on the line.
• Active indicates that the line is handling a call.
dvRq The required state of the line:
• Down indicates that the line is required to be nonoperational.
• Up indicates that the line is required to be in normal mode.
sAdm The desired administrative state of the line:
• Down specifies that the line should terminate all operations and enter the
down state.
• Up specifies that the line should come up in normal operations mode.
The actual state of the line can differ from the desired state, as when a device is
powering up, or you change the desired state on a running slot. Changing the
desired state does not force a line to the new state. It indicates that the Stinger
should change the line state in a graceful manner.
nailg The nailed group to which the line is assigned.

Stinger Reference Guide 1-5

Stinger Command Reference
Auth

Auth
Description: Authenticates your current login by applying a specified User profile. Use this
command to increase or decrease the permissions of the current login. For information about
permission levels in User profiles, see the description of the User profile.

Permission level: User

Usage: auth user-name

Option Description
user-name Authenticate the specified User profile.

Example: To login as Joe:

admin> auth joe
Password:

If you supply the proper password for the User profile you’ve specified, the Stinger enables the
privileges in that profile and then displays the system prompt again. Note that the User profile
may specify its own system prompt, which is a useful way to flag certain permission levels.
For example:
admin> auth admin
Password:

If you supply the wrong password at the prompt, you’ll see the following message:
Login incorrect
User:

Enter the user name again to display the Password prompt.

Permission level: User

Usage: clear [-r]

Option Description
-r Reset the terminal session’s VT100 attributes.

Example: To clear the screen:

admin> clear

1-6 Stinger Reference Guide

Stinger Command Reference
Clock-Source

Clock-Source
Description: Displays the current clock-source settings for the system. If a line is specified as
the master clock-source, it provides the source of timing information for synchronous
connections. The clock allows the sending device and the receiving device to determine where
one block of data ends and the next begins. If multiple lines specify that they are eligible to be
the clock-source, you can assign clock-source priority among multiple lines. In the output of
the Clock-Source command, the value 1 signifies the highest priority. For information about
setting clock-source priority, see the Stinger Hardware Installation Guide.

The Clock-Source command lists only currently eligible local clock sources. Sources with
layer 2 up, which are preferred, are marked with an asterisk. In addition, a message is logged
whenever the system clock source changes. You must first execute the Open command to open
a session with the card.

Permission level: Diagnostic

Usage: clock-source

Example: The Clock-Source command on the shelf controller shows the master clock’s slot
card line number:
admin> clock-source
Master line: 1
Source List:
Source: line 1 Available* priority: 2
Source: line 3 Available priority: 2

On the slot cards, the Clock-Source command uses one-base indexes for the card’s lines. For
example, to open a session with a DS3 card and display its clock-source settings:
admin> open 1 1
ds3-1/2> clock-source
Master line: 1
Source List:
Source: line 1 Available* priority: 2
Source: line 3 Available priority: 2

Following are examples of log messages generated for clock-source transitions:

LOG notice, Shelf 1, Controller, Time: 19:44:39--
Master clock source changed to slot-1/8 line 1
LOG notice, Shelf 1, Controller, Time: 10:34:56--
Master clock source changed to local oscillator

Stinger Reference Guide 1-7

Stinger Command Reference
Clr-History

Clr-History
Description: Clears the fatal-error history log.

Permission level: System

Usage: clr-history

Example: To display the fatal-error history log, enter the Fatal-History command:
admin> fatal-history
OPERATOR RESET: Index: 99 Revision: 1.0F Controller
Date: 09/20/1998. Time: 16:56:01
Reset from unknown, user profile super.
OPERATOR RESET: Index: 99 Revision: 1.0F Controller
Date: 09/24/1998. Time: 11:56:10
Reset from unknown, user profile super.

To clear the log:

admin> clr-history

Permission level: System

Usage: connection

Example: An administrator opens a window with connection status information displayed:

admin> connection

2 Connections Status
001 tomw TCP 1/7/14 19200 Serial number: 6201732 Version: 1.0F
002 timl TCP 1/7/3 56000
Rx Pkt: 11185897
Tx Pkt: 42460
Col: 129

12/27/1998 12:20:15 Up: 3 days, 21:47:32

M: 29 L: info Src: shelf-1/controller

Issued: 16:48:02, 09/27/1998

[Next/Last Conn: <dn/up arw>, Next?Last Page: <pg dn/up>, Exit: <esc>]

1-8 Stinger Reference Guide

Stinger Command Reference
Date

For each active connection, the displays includes a line that shows the user or station name,
type of connection, shelf/line/channel on which the call was placed or received, and the
bandwidth or baud rate. You can press the Down-Arrow key to scroll through the list of active
connections.

To display a prompt below the status window, press the Escape key. To close the status
window, enter the Status command:
admin> status

Permission level: Update

Usage: date [yymmddhhmm]

Option Description
yy A two-character representation of the current year
mm A two-character representation of the current month
dd A two-character representation of the current day
hh A two-character representation of the hour
mm A two-character representation of the minute

Example: To set the Stinger system date and time to noon, December 31, 1998:
admin> date 9812311200

Debug
Description: Enables or disables diagnostic output.

Permission level: Diagnostic

Usage: debug on | off

Syntax element Description

on Enables diagnostic output.
off Disables diagnostic output.

Stinger Reference Guide 1-9

Stinger Command Reference
Delete

Example: To enable diagnostic output:

admin> debug on
Diagnostic output enabled
admin> FRMAIN: Setting timer DCE
FRMAIN: time 88121200, mkstatus type 1, seq (026,025)

Delete
Description: Permanently deletes a profile from local storage. Any flash space that was used
by the profile becomes available to the system.

Permission level: Update

Usage: delete [-f] profile-type [profile-index]

Syntax element Description

-f Delete without prompting for confirmation.
profile-type A type of profile, as listed by the Dir command.
profile-index The index of the specified profile type. Not all profile types require an
index.

Example: To delete the Connection profile previously created for Tom Lynch:
admin> delete conn tlynch
Delete profile CONNECTION /tlynch? [y/n] y
CONNECTION /tlynch deleted

Permission level: Diagnostic

Usage: device -d|-t|-u|-? interface_address

Option Description
-d Bring the specified device down.
-t Toggle debug output level.
-u Bring the specified device up.
-? Display a usage summary.
interface_address The interface address of the device, specified as shelf, slot,
item number, and logical item number.

1-10 Stinger Reference Guide

Stinger Command Reference
Dir

Example: To administratively down device #24 in slot #3 on shelf #1:

admin> device -d {{1 3 24} 0}

Permission level: System

Usage: dir [profile-type [profile-index ]]

Option Description
profile-type List all the profiles of the specified type.
profile-index Display information about the specified profile.

Example: To list all profile types, enter the Dir command with no options:
admin> dir
ADMIN-STATE-PERM-IF SNMP Permanent Interface Admin State
ADMIN-STATE-PHYS-IF SNMP Physical Interface Admin State
AL-DMT-STAT Dmt Alcatel adsl line status
AL-DMT Alcatel cell dmt adsl line parameters
ANSWER-DEFAULTS Answer profile
ATMPVC-STAT ATM PVC State
ATMVCC-STAT ATM VCC State
BANDWIDTH-ALLOC Bandwidth allocation for slots for ATM
BANDWIDTH-STATS Bandwidth statistics for slots for ATM
BASE System version and enabled features
CALL-INFO Active call information
CALL-LOGGING Call logging
CONNECTION Connection (WAN) profiles
DEVICE-STATE Device Operational State
DEVICE-SUMMARY Device availability summary information
ERROR Fatal Error log
ETHER-INFO Ethernet Interfaces Information
ETHERNET Ethernet Interfaces Configuration
EXT-TSRV Remote Terminal Server Config Information
EXTERNAL-AUTH External authentication info
IP-GLOBAL Global TCP/IP parameters
IP-INTERFACE IP interfaces
IP-ROUTE Static IP routes
LOAD-SELECT Code images to load
LOG System event logging configuration
SDSL Sdsl line parameters
SDSL-STAT Sdsl line status
SERIAL Serial interfaces
SLOT-INFO Slot Info profile

Stinger Reference Guide 1-11

Stinger Command Reference
Dircode

SLOT-STATE Slot Operational State

SLOT-TYPE Slot Type profile
SNMP SNMP configuration
SYSTEM System-wide basic parameters
TERMINAL-SERVER Terminal server parameters
TIMEDATE Current system date and time
TRAP SNMP trap destinations
USER Administrative user accounts

Example: To list all Connection profiles, as well as all RADIUS profiles for nailed-up
connections, specify conn as the profile type. For example:
admin> dir conn
169 08/31/1998 22:21:07 dallas
195 09/12/1998 10:14:08 chicago
189 11/14/1998 09:34:44 nyc1
177 11/14/1998 11:38:09 nyc2
187 10/22/1998 15:34:53 la
201 10/14/1998 14:29:32 sacto

This form of the command is useful for displaying valid profile indexes. The index is in the
rightmost field. The listing includes the following information:
• The first field shows the number of bytes the profile uses.
• The second field shows the date that the profile was last modified.
• The third field shows the time that the profile was last modified.
• The fourth field shows the profile index. If the profile does not have an index, the fourth
field contains a period. If only one profile exists, the field displays that profile’s name.

To list information about a specific profile, include its index on the command line:
admin> dir conn dallas
169 08/31/1998 22:21:07 dallas

Permission level: System

Usage: dircode

The following error messages can appear when you use the Dircode command:
Card N is not formatted for use with this system
The flash card is blank, corrupted, or formatted for another environment, such as DOS. To
use this card, you must issue a Format command first.
Card N is temporarily unavailable
The flash card is currently coming up or is being formatted.

1-12 Stinger Reference Guide

Stinger Command Reference
DMTALDSLlines

Card N is unavailable
The flash card experienced an error and is inaccessible. Check that the card is inserted
properly.

Example: To display the contents of the flash-card code directory:

admin> dircode
Flash card code directory:
Card 1, format FTL/FAT, capacity 8MB
/current:
shelf-controller 1229934 Wed Jun 9 11:22:16 1999 Version 8.0a0e0
sdsl-atm-card 525661 Wed Jun 9 11:22:46 1999 Version 8.0a0e0
al-dmtadsl-atm-card 620347 Wed Jun 9 11:23:20 1999 Version 8.0a0e0

The information displayed by this command includes the card number (1 or 2) and the size of
the code directory. For each expansion module installed in the system, it also shows the
following information:
• The type of card the load is for.
• The size of the code related to the card.
• The date the load was copied to the flash card.
• The code version.

Permission level: System

Usage: dmtaldsllines [-a|-d|-f|-u]

Option Description
no argument Display options.
-a Display all DMT Alcatel ADSL lines.
-d Display all disabled DMT Alcatel ADSL lines.
-f Display all free DMT Alcatel ADSL lines.
-u Display all ATM DMT Alcatel ADSL lines in use.

Stinger Reference Guide 1-13

Stinger Command Reference
DMTALDSLlines

Example: To display all DMT Alcatel ADSL lines:

All DMT Alcatel ADSL lines:
(dvOp dvUpSt dvRq sAdm nailg)
Line { 1 4 1 } (Down Idle UP UP 00151)
Line { 1 4 2 } (Down Idle UP UP 00152)
Line { 1 4 3 } (Down Idle UP UP 00153)
Line { 1 4 4 } (Up Idle UP UP 00154)
Line { 1 4 5 } (Down Idle UP UP 00155)
Line { 1 4 6 } (Down Idle UP UP 00156)
Line { 1 4 7 } (Down Idle UP UP 00157)
Line { 1 4 8 } (Down Idle UP UP 00158)
Line { 1 4 9 } (Down Idle UP UP 00159)
Line { 1 4 10 } (Down Idle UP UP 00160)
Line { 1 4 11 } (Down Idle UP UP 00161)
Line { 1 4 12 } (Down Idle UP UP 00162)

The data displayed includes the physical address of each line and the following status
information:

1-14 Stinger Reference Guide

Stinger Command Reference
Ether-Display

Ether-Display
Description: Displays the contents of Ethernet packets.

Permission level: Diagnostic

Usage: ether-display port# n

Syntax element Description

port# The Ethernet port on which the packets are received or transmitted. If
you specify 0 (zero) for the port number, the Stinger displays all ports
on the shelf.
n The number of octets to display in each Ethernet packet.

Example: To display Ethernet packet contents for port 0 in 12-octet sizes:

admin> ether-display 0 12
ETHER XMIT: 12 of 60 octets
10799E40: 08 00 20 75 80 6b 00 c0 7b 5e ad 3c .. u.k.. {^.<
ETHER RECV: 12 of 60 octets
1077D980: 00 c0 7b 5e ad 3c 00 80 c7 2f 27 ca ..{^.<.. ./’.
ETHER XMIT: 12 of 509 octets
1079A480: 00 80 c7 2f 27 ca 00 c0 7b 5e ad 3c .../’... {^.<
ETHER XMIT: 12 of 330 octets
1079AAC0: 08 00 20 75 80 6b 00 c0 7b 5e ad 3c .. u.k.. {^.<
ETHER RECV: 12 of 60 octets
1077DFD0: 00 c0 7b 5e ad 3c 08 00 20 75 80 6b ..{^.<.. u.k
ETHER XMIT: 12 of 451 octets
1079B100: 08 00 20 75 80 6b 00 c0 7b 5e ad 3c .. u.k.. {^.<
ETHER XMIT: 12 of 723 octets
1079B740: 00 20 af f8 0f 1d 00 c0 7b 5e ad 3c . ...... {^.<
ETHER XMIT: 12 of 84 octets
1078F580: 08 00 20 75 80 6b 00 c0 7b 5e ad 3c .. u.k.. {^.<
ETHER RECV: 12 of 60 octets
1077E620: 00 c0 7b 5e ad 3c 00 20 af f8 0f 1d ..{^.<. ....
ETHER XMIT: 12 of 238 octets
1078FBC0: 00 20 af f8 0f 1d 00 c0 7b 5e ad 3c . ...... {^.<
ETHER XMIT: 12 of 373 octets
10790200: 00 20 af f8 0f 1d 00 c0 7b 5e ad 3c . ...... {^.<
ETHER RECV: 12 of 60 octets
1077EC70: 00 c0 7b 5e ad 3c 00 20 af f8 0f 1d ..{^.<. ....
ETHER XMIT: 12 of 267 octets
10790840: 00 20 af f8 0f 1d 00 c0 7b 5e ad 3c . ...... {^.<

To stop displaying the Ethernet statistics, enter:

admin> ether-display 0 0

Note: You must set Debug On for Ether-Display to have any effect.

Stinger Reference Guide 1-15

Stinger Command Reference
Fatal-History

Fatal-History
Description: Displays the Stinger fatal-error log. Every time a fatal error occurs on the
Stinger, it is logged to the fatal-error history log. Available flash space limits the number of
entries in the log. You can clear the log with the Clr-History command.
Permission level: System
Usage: fatal-history
Example: To display the fatal-history log:
admin> fatal-history
OPERATOR RESET: Index: 99 Revision: 1.3Ap6 Shelf 1
Date: 09/20/1998. Time: 16:56:01
Reset from unknown, user profile super.
OPERATOR RESET: Index: 99 Revision: 1.3Ap6 Shelf 9
Date: 09/24/1998. Time: 11:56:10
Reset from unknown, user profile super.
See Also: Clr-History

Format
Description: Formats a PCMCIA flash card, preparing it for use in the Stinger. You must
format the card before you can use the Load command to load code.
Permission level: Code
Usage: format [-f] device

Syntax element Description

-f Force format without asking for verification.
device The name of the flash card to be formatted. The following are valid
names:
• [flash-card-]1
• [flash-card-]2
Note that device names may be abbreviated as 1 and 2.

The following error messages can appear when you use the Format command:
error: flash card N is not present
No flash card is detected in the specified slot (1 or 2).
error: flash card N is unavailable
The flash card in the specified slot is already being formatted, is just coming up, or is in an
error condition.
error: flash card N is write-protected
The write-protect switch is set on the card in the specified slot (1 or 2).
error: flash card N is currently in use
One or more images on the flash card are currently in use (being read by a slot card in
LOAD state or being written as part of a code download).

1-16 Stinger Reference Guide

Stinger Command Reference
Fsck

Example: After inserting a PCMCIA flash card in the second (rightmost) slot on the shelf
controller, you would format it as follows:
admin> format flash-card-2
format will erase existing card 2 data; confirm: [y/n] y

Permission level: Code

Usage: fsck [-b -c -v] device

Syntax element Significance

-b Try to ignore bad magic. Each flash card file system contains two direc-
tory blocks: an in-use block and an empty block used when deleting
information. Both directory blocks contain a magic identifier, which indi-
cates that they are indeed directory blocks. A candidate directory block is
one that is missing the magic identifier but contains information that can
be interpreted as directory-block information. If Fsck finds no valid
directory block but does find a candidate directory block, this option
causes it to ignore the bad magic and go ahead and use the candidate
directory block anyway. This option allow the file system to be used nor-
mally until the next reboot, assuming that the Fsck command found no
other errors.
-c Do not check file contents. By default, Fsck checks the file contents for
validity, which involves opening and reading every file, checking the file
header, verifying the data length and CRC value, and performing other
functions. This option causes Fsck to check only the file-system format.
-v Display verbose messages, including the number of blocks used, a block
list, and (unless the –c option is specified) various information about the
files found. See the example below.
device The name of the flash card to be checked. The following are valid names:
• [flash-card-]1
• [flash-card-]2
Note that device names may be abbreviated as 1 and 2.

Stinger Reference Guide 1-17

Stinger Command Reference
Get

Example: To run a file-system check of the card named flash-card-1:

admin> fsck 1
Volume Stats:
Block Size: 512 (typical: 512)
Blocks Per Cluster: 4 (typical: 1, may be powers of 2 up to 16)
Reserved Blocks: 1 (typical: 1, but may be 0 - hundreds)
Number of FATs: 2 (must be 2)
Number of Root Directory Entries: 128 (typically between 32 and 224)
Total Blocks: 13824
Media Descriptor: f0 (ignored)
Volume Info calculated from values above:
Blocks Per Fat: 11
Fat Start Block: 1
Root Dir Start Block: 23
Data Start Block: 31
Number of Root Dir Blocks: 8
Number of Clusters: 3448
FAT Type: Fat12
Cluster Usage
Usable Clusters: 3446
Free Clusters: 2284
Clusters lost during interrupted writes: 0
Other reserved clusters: 1158

Permission level: System

Usage: get profile-type [profile-index ][[sub-profile]

[param-name [param-index ]]

Syntax element Description

profile-type The type of profile to be displayed, which might require an index as
well. A period represents the working profile (the profile in the edit
buffer).
profile-index The profile index (the name or address that distinguishes a profile
from others of the same type). To see profile indexes, use the Dir com-
mand.
sub-profile A subprofile within the specified profile.

1-18 Stinger Reference Guide

Stinger Command Reference
Get

Syntax element Description

param-name A parameter within the specified profile. If the parameter is in a sub-
profile, you must specify the subprofile name first.
param-index Complex parameters have an index. For example, the Inter-
face-Address parameter contains both the physical-address and logi-
cal-item indexes.

Example: To display the contents of a Connection profile called Dallas:

admin> get connection dallas
[in CONNECTION/dallas]
station*=dallas
active=yes
encapsulation-protocol=atm
called-number-type=national
dial-number=85283
clid=""
ip-options={ yes yes 1.1.1.1/8 0.0.0.0/0 7 100 255 no no 0 +
session-options={ "" "" no 120 no-idle 120 "" }
telco-options={ ans-and-orig no off 1 no no 64k-clear 0 "" "" +
answer-options={ }
usrRad-options={ global 0.0.0.0 1646 "" 1 acct-base-10 }
calledNumber=""

To display the IP-Options subprofile:

admin> get connection dallas ip-options
[in CONNECTION/dallas:ip-options]
ip-routing-enabled=yes
vj-header-prediction=yes
remote-address=0.0.0.0/0
local-address=0.0.0.0/0
routing-metric=7
preference=100
down-preference=255
private-route=no
temporary-route=no
ip-direct=0.0.0.0
rip=routing-off
client-default-gateway=0.0.0.0
if-remote-address=0.0.0.0
tos-options={ no 00 normal input }
source-ip-check=no

Several additional examples follow. The first shows how to use the param-name argument
for the IP address of an Ethernet interface:
admin> get ip-int {{1 c 1}0} ip-address
[in IP-INTERFACE/{ { shelf-1 controller 1 } 0 }:ip-address]
ip-address=10.65.12.224/24

Stinger Reference Guide 1-19

Stinger Command Reference
Get

The next example shows how to use a parameter index on the Get command line:
admin> get ip-int {{1 c 1}0} interface-address physical-address
[in IP-INTERFACE/{{shelf-1 controller 1} 0}:interface-address:
physical-address]
shelf=shelf-1
slot=controller
item-number=1

The Get command, followed by a period, displays the contents of the current location in the
working profile:
admin> get .
[in CONNECTION/dallas:ip-options]
ip-routing-enabled=yes
vj-header-prediction=yes
remote-address=0.0.0.0/0
local-address=0.0.0.0/0
routing-metric=7
preference=100
down-preference=255
private-route=no
temporary-route=no
ip-direct=0.0.0.0
rip=routing-off
client-default-gateway=0.0.0.0
if-remote-address=0.0.0.0
tos-options={ no 00 normal input }
source-ip-check=no

As when you use the List command, you can modify “Get .” with “..” to display a higher
context than the current location in the working profile:
admin> get . ..
[in CONNECTION/dallas]
station*=dallas
active=yes
encapsulation-protocol=atm
called-number-type=national
dial-number=""
clid=""
ip-options={ yes yes 10.122.99.1/24 0.0.0.0/0 7 100 255 no no +
session-options={ "" "" no 120 no-idle 120 "" 0}
telco-options={ ans-and-orig no off 1 no no 56k-restricted 0 +
usrRad-options={ global 0.0.0.0 1646 "" 1 acct-base-10 }
calledNumber=""
framed-only=no
atm-options={ aal5-llc 0 32 }
atm-connect-options={ aal5-llc 0 32 }

1-20 Stinger Reference Guide

Stinger Command Reference
Help

To display a deeper context than the current location in the working profile, specify one or
more subprofiles after the period:
admin> get . ip
[in CONNECTION/dallas:ip-options]
ip-routing-enabled=yes
vj-header-prediction=yes
remote-address=0.0.0.0/0
local-address=0.0.0.0/0
routing-metric=7
preference=100
down-preference=255
private-route=no
temporary-route=no
ip-direct=0.0.0.0
rip=routing-off
client-default-gateway=0.0.0.0
if-remote-address=0.0.0.0
tos-options={ no 00 normal input }
source-ip-check=no

Permission level: User

Usage: help [-a]|[command-name]

Option Description
–a List all commands. (Without this option, the list includes only com-
mands authorized by the current User profile.)
command-name Display information about the specified command.

Example: To display a list of commands authorized for your current login:

admin> help
? ( user )
arp ( system )
auth ( user )
clear ( user )
clock-source ( diagnostic )
clr-history ( system )
connection ( system )
date ( update )
delete ( update )
device ( diagnostic )
dir ( system )
dircode ( system )

Stinger Reference Guide 1-21

Stinger Command Reference
If-Admin

ether-display ( diagnostic )
fatal-history ( system )
format ( code )
get ( system )
help ( user )
if-admin ( diagnostic )
line ( system )
[More? <ret>=next entry, <sp>=next page, <^C>=abort]

To display help text about the Dir command, for example:

admin> help dir
dir list all profile types
dir profile-type list all profiles of the specified type
dir profile-type profile-index list the specified profile
instance

Dependencies: The current security level is set by the current User profile and determines
which commands are displayed in response to this command. If the current User profile does
not have sufficient privileges to execute a command, the command is not displayed unless you
specify the -a option. Commands with the User security level are always displayed. For
detailed information, see “Auth” on page 1-6.

If-Admin
Description: Displays information about or changes the state of an SNMP interface. Each
device in the system has a unique SNMP interface number assigned to the device when a card
is installed. Interface numbers are stored in NVRAM, which is not affected by system resets,
so a physical device keeps the same interface number across system resets or power failures.

Permission level: Diagnostic

Usage: if-admin -a|-d interface |-l|-u interface|-r interface|-?

Option Description
-a List available SNMP interface numbers.
-d interface Administratively down a specified SNMP interface
-l List SNMP interface/device address mappings.
-u interface Administratively bring up a specified SNMP interface.
-r interface Reset an SNMP interface.
-? Display a usage summary.

1-22 Stinger Reference Guide

Stinger Command Reference
IProute

Example: To display a list of all SNMP interface numbers assigned by the system, specify the
-l option:
admin> if-admin -l
SNMP-IF DEVICE ADDRESS
101 - { 1 11 32 }
1 - { 1 17 1 }
102 - { 1 11 33 }
2 - { 1 3 1 }
103 - { 1 11 34 }
3 - { 1 3 2 }
104 - { 1 11 35 }
4 - { 1 3 3 }
105 - { 1 11 36 }
5 - { 1 3 4 }
106 - { 1 11 37 }
6 - { 1 3 5 }
107 - { 1 11 38 }
7 - { 1 3 6 }
108 - { 1 11 39 }
8 - { 1 3 7 }
[More <ret>=next entry, <sp>=next page, <^C>=abort]

To bring up SNMP interface number 111:

admin> if-admin -u 111
interface 111 state change forced

IProute
Description: Enables you to manually add or delete IP routes. Changes to the routing table do
not persist across system resets.

Permission level: System

Usage: iproute add|delete

Syntax element Description

add Add an IP route to the routing table.
delete Delete an IP route from the routing table.

Stinger Reference Guide 1-23

Stinger Command Reference
IProute

Adding a static IP route to the routing table

To add a static IP route to the unit’s routing table, use the IProute Add command.
iproute add dest_IPaddr [/subnet_mask]
gateway_IPaddr[/subnet_mask ] [pref] [metric]

Syntax element Description

dest_IPaddr/subnet_mask Destination network address and subnet mask (in
bits). The default is 0.0.0.0/0.
gateway_IPaddr/subnet_mask IP address of the router that can forward packets
to the destination network, and subnet mask (in
bits). The default is 0.0.0.0.
pref Route preference. The default is 100.
metric Virtual hop count of the route. You can enter a
value between 1 and 15. The default is 1.

For example, consider the following command:

admin> iproute add 10.1.2.0/24 10.0.0.3/24 1

It adds a route to the 10.1.2.0 network, through the IP router located at 10.0.0.3/24. The metric
to the route is 1 (one hop away).

If you try to add a route to a destination that is already in the routing table, the Stinger does not
replace the existing route unless it has a higher metric than the route you attempt to add. If you
get the message Warning: a better route appears to exist, the Stinger has
rejected your attempt to add a route. Note that RIP updates can change the metric for the route.

Note: Any routes you add with the IProute Add command are lost when you reset the Stinger.

Deleting a static IP route from the routing table

To remove a static IP route from the unit’s routing table, enter the IProute Delete command.
iproute delete dest_IPaddr /subnet_mask
[gateway_IPaddr[/subnet_mask ]]

For example, the following command removes the route to the 10.1.2.0 network:
admin> iproute delete 10.1.2.0/24 10.0.0.3/24

Note: RIP updates can add back any route you remove with IProute Delete. Also, the Stinger
restores all routes listed in the IP-Route profile after a system reset.

1-24 Stinger Reference Guide

Stinger Command Reference
Line

Line
Description: Specifies that the upper-right or lower-right portion of the status window (or
both) should display line and channel status information. If the status window is not already
displayed, this command opens it with the connection status information displayed.

Permission level: System

Usage: line all|enabled top|bottom

Option Description
all Display status information about all lines.
enabled Display status information only about enabled lines.
top Display line status in the upper portion of the status window.
bottom Display line status in the lower portion of the status window (the
default).

Example: To display line status information in the upper part of the status window:
admin> line top

2 Connections
001 tomw TCP 1/7/14 19200 SanFran+ 1/13/8 RA I........ ........ ......
002 timl TCP 1/7/3 56000 Berkeley 1/01/04 RA N........ ........ ......
1/01/05 RA T........ ........ ......
Clevela+ 1/01/01 RA T........ ........ ......
Oakland 1/01/02 RA S........ ........ ......

M: 48 L: info Src: shelf-1/controller

Issued: 16:48:02, 09/27/1998

[Next/Last Conn <dn/up arw>, Next?Last Page: <pg dn/up>, Exit: <esc>]

Line status information includes the following identifiers and codes:

• A line identifier in shelf/slot/line format.
• A two-character code indicating the line’s link status.
• A single-character code indicating channel status. For an SS7 data trunk, this character
code is always 7.

Stinger Reference Guide 1-25

Stinger Command Reference
Line

Following are the link-status codes:

Code Description
LS (UDS3 lines) Loss of Signal. No signal has been detected.
LF (UDS3 lines) Loss of Frame. A signal is present but is not valid for framing.
RA Red Alarm. The line is not connected, or it is improperly con-
figured, experiencing a very high error rate, or supplying inade-
quate synchronization.
YA Yellow Alarm. The Stinger is receiving a Yellow Alarm pat-
tern, which indicates that the other end of the line cannot recog-
nize the signals the Stinger is transmitting.
DF D-channel Fail. The D channel for a PRI line is not currently
communicating.
1S All Ones. The network is sending a keepalive signal to the
Stinger to indicate that the line is currently inoperative.
DS Disabled. The line might be physically connected, but the pro-
file specifies that it is inactive.

Following are the channel-status codes:

Code Description
. The channel is not available for one of the following reasons:
• The line is disabled.
• The channel has no physical link or does not exist.
• The channel configuration specifies that the channel is unused.
• The channel is reserved for framing.
* The channel is connected in a current call.
- The channel is currently idle (but in service).
c The channel is currently not available because it is in the process of clearing
the most recent call, or because it is in the process of sending echo cancellation
tones to receive a call.
d The Stinger is dialing from this channel for an outgoing call.
r The channel is ringing for an incoming call.
m The channel is in maintenance/backup mode (ISDN and SS7 only).
n The channel is nailed.
o The channel is out of service (ISDN and SS7 only).
s The channel is an active D channel (ISDN only).

1-26 Stinger Reference Guide

Stinger Command Reference
List

To display a prompt below the status window, press the Escape key. To scroll through the list
of lines, press the Up-Arrow or Down-Arrow key, or to page up or down through the lines,
press the Page Up or Page Dn key. To close the status window:
admin> status

Permission level: System

Usage: list [..] [param-name [param-index ] [sub-profile]]

Option Description
.. (two periods) Close the current subprofile and return to the previous higher context.
param-name A parameter in the current context. If the parameter is in a subprofile,
you must specify the subprofile name first.
param-index Complex parameters have an index. For example, the Inter-
face-Address parameter contains both the physical-address and logi-
cal-item indexes.
sub-profile List the contents of a subprofile that is visible in the current context,
and make that subprofile the current context.

Example: To make a Connection profile named Dallas the working profile:

admin> read connection dallas

To list its contents:

admin> list
[in CONNECTION/dallas]
station*=dallas
active=yes
encapsulation-protocol=atm
called-number-type=national
dial-number=85283
clid=""
ip-options={ yes yes 1.1.1.1/8 0.0.0.0/0 7 100 255 no no 0 +
session-options={ "" "" no 120 no-idle 120 "" }
telco-options={ ans-and-orig no off 1 no no 64k-clear 0 "" "" +
usrRad-options={ global 0.0.0.0 1646 "" 1 acct-base-10 }
calledNumber=""

Stinger Reference Guide 1-27

Stinger Command Reference
List

To list the IP-Options subprofile:

admin> list ip-options
[in CONNECTION/dallas:ip-options]
ip-routing-enabled=yes
vj-header-prediction=yes
remote-address=0.0.0.0/0
local-address=0.0.0.0/0
routing-metric=7
preference=100
down-preference=255
private-route=no
temporary-route=no
ip-direct=0.0.0.0
rip=routing-off
client-default-gateway=0.0.0.0
if-remote-address=0.0.0.0
tos-options={ no 00 normal input }
source-ip-check=no

To return to the top-level context of the profile:

admin> list ..

To use the List command to display the Telco-Options subprofile:

admin> list .. telco
[in CONNECTION/dallas:telco-options]
answer-originate=ans-and-orig
nailed-groups=1
force-56kbps=no
data-service=56k-restricted
call-by-call=0
billing-number=""
transit-number=""

The List command works only on the working profile. To make an existing profile the working
profile, use the Read command. When you create a new profile, it becomes the working profile
automatically.

1-28 Stinger Reference Guide

Stinger Command Reference
Load

Load
Uploads a code image to flash or runs a remote configuration script. The code image or script
may be located on the disk of the PC you are using for the terminal session with the Stinger or
on a network host that supports TFTP.

Permission level: Update

Usage: load [-v] load-type [-subtype] source [device]

Syntax element Description

-v Display verbose output for configuration loads.
load-type The load type:
• config— configuration file
• sdsl—code for an SDSL card
• sdsl70d—code for an SDSL data card
• sdsl70v—code for an SDSL voice card
• sr— shelf-router runtime load (resides in onboard flash)
• tar—a tar file containing all slot card code images
• uds3—code for an unchannelized DS3 card
-subtype The subtype of the image:
• –normal (for regular image, the default)
• –debug (for debugging image)
• –diagnostic (for diagnostic image)
The Load command supports subtype alignment, which enables you to
change the subtype of the image. For example, if you load an image whose
header specifies that it is a normal image, but you specify the
–debug subtype, the image saved in flash has a subtype of Debug instead
of Normal.
source The location from which the file will be loaded:
• network host filename—After typing the word
network, you can specify a hostname or IP address and the path to
the file on a TFTP host.
• console—The PC connected to the Stinger via the serial port.
device The name of the flash card to load. The valid device names are:
• [flash-card-]1 (default)
• [flash-card-]2
Note that device names may be abbreviated as 1 and 2.

Stinger Reference Guide 1-29

Stinger Command Reference
Load

Example: To load a configuration file named unit.cfg from a network host 10.8.7.2 to
flash-card-1:
admin> load config network 10.8.7.2 /unit.cfg

To load the unitrel.tar file from a network host named host1:

admin> load tar net host1 unitrel.tar

If the system terminates the process of loading a tar file, one of the following messages might
appear:
load aborted: not a tar image
load aborted: a tar image, inconsistent with the specified
load-type.
load aborted: invalid/unknown image header.
load aborted: mismatched image for the specified load-type.
load aborted: invalid image, unsupported by load tar command.

The Load command supports type checking to verify that the load type specified on the
command line matches the image header. The above messages indicate that the type checking
process discovered inconsistencies between the load type and the image header. Check your
command line. If necessary, download the tar file again.

The following warning message does not terminate the Load, but indicates that you are not
loading the most recent software version:
load: warning: old image header version detected, load
continued...

Finally, the following error messages can also appear when you use the Load command:
load: error: flash card write failed: card full
There is no space to load software on the flash card.
load: error: specified flash card not present
No flash card is detected in the specified slot (1 or 2).
load: error: specified flash card not formatted
A Format command is required before loading the software.
load: error: specified flash card has obsolete format
A Format is required because a 1.3A file system was detected.
load: error: specified flash card is write-protected
The flash card’s write-protect switch is set.
load: error: specified flash image is currently in use
A slot card in the LOAD state is currently accessing the flash card.

Dependencies: You can set parameters in the Load-Select profile to specify which slot-card
images to load to flash when you use a Load Tar command. An explicit Load command for a
particular card type overrides the settings in the Load-Select profile. The Load command
supports type checking to verify that the load type specified on the command line matches the
image header.

1-30 Stinger Reference Guide

Stinger Command Reference
Log

Log
Description: Specifies that the upper-right or lower-right portion of the status window (or
both) should display a message from the Stinger log buffer that contains the most recent
system events. If the status window is not already displayed, this command opens it with the
connection status information displayed.

The Log profile controls whether logs are sent to a Syslog host, as well as how many logs are
stored in the Stinger buffer. The number of events stored in the log is set by the Save-Number
parameter. For more information about the Log profile, see the description of the Log profile.

Permission level: System

Usage: log top|bottom

Option Description
top Display the log in the upper-right portion of the status window.
bottom Display the log in the lower-right portion of the status window.

Example: To display the event log in the lower portion of the status window:
admin> log bottom

2 Connections Status
001 tomw TCP 1/7/14 19200 Serial number: 6201732 Version: 1.0F
002 timl TCP 1/7/3 56000
Rx Pkt: 11185897
Tx Pkt: 42460
Col: 129

12/26/1998 12:20:15 Up: 3 days, 21:47:32

M: 29 L: info Src: shelf-1/controller

Issued: 16:48:02, 09/27/1998

[Next/Last Conn <dn/up arw>, Next?Last Page: <pg dn/up>, Exit: <esc>]

The first line of the event-log window shows the log entry number (M: 00 through M: N, where
N is set in the Save-Number parameter of the Log profile), the level of message, and the device
on which the event occurred. The last line shows the date and time when the event occurred.

Stinger Reference Guide 1-31

Stinger Command Reference
Log

The message levels are as follows:

Level Description
emergency A failure or major error has occurred, and normal operation is doubtful.
alert A failure or major error has occurred, but normal operation can probably
continue.
critical An interface has gone down, or there has been a security error.
error Something that should not occur has occurred.
warning Something out of the ordinary, such as a login failure due to an invalid user
name or password, has happened in otherwise normal operations.
notice Something of interest, such as a link going up or down, has happened dur-
ing normal operation.
info A change in state or status was noticed. Such messages are not of general
interest.
debug The message is of interest only if you are debugging a configuration.

The text of the most recent message is displayed in the middle of the window. You can press
the Up-Arrow key to see previous messages, and return to more recent messages by pressing
the Down-Arrow key.

Following are some sample informational messages:

Informational message Description

Incoming call A call has been received but not yet routed.
Outgoing call The Stinger has dialed a call.
Added Bandwidth The Stinger has added bandwidth to an active call.
Ethernet up The Ethernet interface has been initialized and is running.
Call Terminated An active call was disconnected normally, although not necessar-
ily by operator command.
Removed Bandwidth The Stinger has removed bandwidth from an active call.
RADIUS config The Stinger has detected an error in the configuration of a
error RADIUS user profile.
Requested Service This message appears in the terminal server interface if the user
Not Authorized requests a service not authorized by the RADIUS server.

1-32 Stinger Reference Guide

Stinger Command Reference
Netstat

Following are some sample warning messages:

Warning message Description

Busy The phone number was busy when the call was dialed.
No connection The remote end did not answer when the call was dialed.
Network The call setup was faulty because of problems in the WAN or in the
problem Line profile configuration. The D channel might be getting an error
message from the switch, or the telco might be experiencing a problem.
Call The call has ended unexpectedly.
disconnected
Far end hung The remote end terminated the call normally.
up
Incoming The Stinger could not place a call because it saw an incoming glare sig-
glare nal from the switch. If you receive this error message, you have proba-
bly selected incorrect Line profile parameters. Check the
Robbed-Bit-Mode setting.
Call Refused An incoming call could not be connected.

Press the Escape key to display a prompt below the status window. Then, to close the status
window, enter the Status command:
admin> status

Stinger Reference Guide 1-33

Stinger Command Reference
Netstat

Option Description
-s Display protocol statistics. If no identifiers follow the –s option, all proto-
identifiers col statistics are printed. If you specify one or more identifiers, they deter-
mine the type of protocol statistics to display. The valid identifiers are
udp, tcp, icmp, ip, igmp, and mcast.
-z Display Zombie routes created for RIP. Zombie routes are those that have
been deleted from the main routing table and are advertised with an infinite
metric (16) for a period of 2 minutes to cause neighboring router to flush
this route from their tables.

Displaying UDP and TCP statistics

To display both UDP and TCP statistics, do not specify any options. For example:
admin> netstat

udp:
-Socket- Local Port InQLen InQMax InQDrops Total Rx
1/c 0 1023 0 1 0 0
1/c 1 route 0 0 0 25
1/c 2 echo 0 32 0 0
1/c 3 ntp 0 32 0 1
1/c 4 1022 0 128 0 0
1/c 5 snmp 0 128 0 0
1/1 0 1 0 256 0 0
1/1 1 1018 0 128 0 0
1/3 0 3 0 256 0 0
1/3 1 1021 0 128 0 0
1/5 0 5 0 256 0 0
1/5 1 1020 0 128 0 0
tcp:
Socket Local Remote State
1/c 0 *.23 *.* LISTEN
1/c 1 10.2.3.114.23 15.5.248.121.44581 ESTABLISHED

The display contains the following information:

Column Description
Socket The shelf, slot, and socket corresponding to a local UDP or TCP port.
Local The port on which the Stinger is listening for UDP packets.
Port
InQLen The number of packets in the input queue for the socket. The packets are wait-
ing to be processed.
InQMax The maximum number of packets that can reside in the input queue for the
socket. A value of 0 (zero) means no limit. The Stinger drops excess packets.
InQDrops The number of packets dropped from the input queue because the value of InQ-
Max was reached.
Total Rx The total number of packets received on the socket, including dropped packets.

1-34 Stinger Reference Guide

Stinger Command Reference
Netstat

Column Description
Local The local IP address and port for a TCP session. For example, in the value
10.2.3.114.23, 10.2.3.114 specifies the IP address and 23 specifies the port for a
TCP session. If the address portion contains only an asterisk (*), the Stinger is
listening for the start of a TCP session.
Remote The remote IP address and port for a TCP session. For example, in the value
15.5.248.121.44581, 15.5.248.121 specifies the IP address and 44581 specifies
the port for a TCP session. If the specification contains only asterisks (*.*), the
Stinger is listening for the start of a TCP session.
State The state of the session. The possible state values are:
CLOSED—The socket is not in use.
LISTEN—The socket is listening for incoming connections. Note that no
session is associated with the LISTEN state, because this state precedes the
establishment of a TCP session.
SYN_SENT—The socket is trying to establish a connection.
SYN_RECEIVED—The connection is being synchronized.
ESTABLISHED—The connection is established.
CLOSE_WAIT—The remote side has shut down the connection, and the
Stinger is waiting for the socket to close.
FIN_WAIT_1—The socket is closed, and the Stinger is shutting down the
connection.
CLOSING—The socket is closed. The Stinger is waiting for
acknowledgment that the remote end has shut down.
LAST_ACK—The remote end has shut down and closed the socket, and it
is waiting for an acknowledgment from the Stinger.
FIN_WAIT_2—The socket is closed, and the Stinger is waiting for the
remote end to shut down the connection.
TIME_WAIT—The socket is closed, and the Stinger is waiting for a
remote-shutdown retransmission.

For UDP, Netstat reports the following services:

Service UDP port number

Route 520
Echo 7
NTP 123
SNMP 161
SNMPTrap 162

Stinger Reference Guide 1-35

Stinger Command Reference
Netstat

For TCP, Netstat reports the following services:

Service TCP port number

Telnet 23

Displaying the interface table

The Stinger interface table shows the address of each interface. To display the Stinger interface
table, specify the -i option:
admin> netstat -i

The entries in the interface table associated with the Stinger Ethernet interfaces use the
following naming convention:
ie[shelf]-[slot]-[item]

For example, the following output shows a four-port Ethernet card in slot 13:
Name MTU Net/Dest Address Ipkts Ierr Opkts Oerr
ie0 1500 12.65.212.0/24 12.65.212.227 107219 0 54351 0
lo0 1500 127.0.0.1/32 127.0.0.1 4867 0 4867 0
rj0 1500 127.0.0.2/32 127.0.0.2 0 0 0 0
bh0 1500 127.0.0.3/32 127.0.0.3 0 0 0 0
wan4 1500 10.122.99.1 - 0 0 0 0
ie1-12-1 1500 11.168.6.0/24 11.168.6.227 430276 651 0 0
ie1-12-2 1500 10.122.72.0/24 10.122.72.1 0 0 0 3144
ie1-12-3 1500 10.122.73.0/24 10.122.73.1 0 0 3142 0
ie1-12-4 1500 10.122.74.0/24 10.122.74.1 0 0 3141 0

The columns in the interface table contain the following information:

Column Description
Name The name of the interface:
• ie0 or ie[shelf]-[slot]-[item] is an Ethernet
interface.
• lo0 is the loopback interface.
• rj0 is the reject interface, used in network summarization.
• bh0 is the blackhole interface, used in network summarization.
• wanN is a WAN connection, entered as it becomes active.
• wanabe indicates an inactive RADIUS dialout profile.
MTU (Maximum Transmission Unit) The maximum packet size allowed on
the interface.
Net/Dest The network or the target host this interface can reach.
Address The address of this interface.
Ipkts The number of packets received.
Ierr The number of packets that contain errors.

1-36 Stinger Reference Guide

Stinger Command Reference
Netstat

Column Description
Opkts The number of packets transmitted.
Oerr The number of transmitted packets that contain errors.

Displaying the routing table

To display the routing table, specify the -r option. For example:

admin> netstat -r

Destination Gateway IF Flg Pref Metric Use

Age

0.0.0.0/0 206.65.212.1 ie0 SG 100 1 4891

48630
10.0.0.0/24 11.168.6.249 ie1-12-1 RGT 100 3 0
9236
10.0.100.0/24 11.168.6.86 ie1-12-1 RGT 100 2 0
48601
10.0.200.0/24 11.168.6.86 ie1-12-1 RGT 100 2 0
48601
10.122.72.0/24 - ie1-12-2 C 0 0 3141
48630
10.122.72.1/32 - lo0 CP 0 0 0
48630
10.122.73.0/24 - ie1-12-3 C 0 0 3140
48630
10.122.73.1/32 - lo0 CP 0 0 0
48630
10.122.74.1/32 - lo0 CP 0 0 0
48630
10.122.99.0/24 10.122.99.1 wan4 SG 100 7 0
48630
10.122.99.1/32 10.122.99.1 wan4 S 100 7 1
48630
127.0.0.1/32 - local CP 0 0 0
48672
127.0.0.2/32 - rj0 CP 0 0 0
48672
127.0.0.3/32 - bh0 CP 0 0 0
48672
11.0.2.0/24 11.168.6.249 ie1-12-1 RGT 100 2 0
48626
11.168.6.0/24 - ie1-12-1 C 0 0 14589
48630
11.168.6.0/24 11.168.6.116 ie1-12-1 *RGTM 100 8 0
48606
11.168.6.0/24 11.168.6.142 ie1-12-1 *RGTM 100 8 0
48610
11.168.6.0/24 11.168.6.96 ie1-12-1 *RGTM 100 8 0
48624

Stinger Reference Guide 1-37

Stinger Command Reference
Netstat

The columns in the routing table contain the following information:

Column Description
Destination The route’s target address. To send a packet to this address, the Stinger
uses this route. If the target address appears more than once in the routing
table, the Stinger uses the most specific route (having the largest subnet
mask) that matches that address.
Gateway The next hop router that can forward packets to the given destination.
Direct routes (without a gateway) show a hyphen in this column.
IF The name of the interface through which to send packets over this route:
• ie0 or ie[shelf]-[slot]-[item ] is an Ethernet interface.
• lo0 is the loopback interface.
• rj0 is the reject interface, used in network summarization.
• bh0 is the blackhole interface, used in network summarization.
• wanN is a WAN connection, entered as it becomes active.
• wanabe indicates an inactive RADIUS dialout profile.
• local indicates a single route targeted at the local machine.
Flg One or more of the following flags:
• C—a directly connected route, such as Ethernet
• I—an ICMP redirect dynamic route
• N—placed in the table via SNMP MIB II
• R—a route learned from RIP
• r—a transient RADIUS-like route
• S —a static route
• ?—a route of unknown origin, which indicates an error
• G—an indirect route via a gateway
• P—a private route
• T—a temporary route
• M—a multipath route
• *—a backup static route for a transient RADIUS-like route
Pref The preference value. See the description of the Preference parameter for
information about defaults for route preferences.
Metric A RIP-style metric for the route, with a range of 0-16.
Use A count of the number of times the route was referenced since it was cre-
ated. (Many of these references are internal, so this is not a count of the
number of packets sent over this route.)
Age The age of the route in seconds. RIP and ICMP entries are aged once every
10 seconds.

1-38 Stinger Reference Guide

Stinger Command Reference
New

Displaying protocol statistics

You can include identifiers in the command line to display IP, UDP, TCP, ICMP, and IGMP
protocol statistics. The system displays TCP statistics collected from slot cards as well as the
shelf controller. All other types of statistics are collected for the shelf controller only. The
following example contains the tcp identifier:
admin> netstat -s tcp
tcp:
17 active opens
160 passive opens
0 connect attempts failed
9 connections were reset
4294967215 connections currently established
75620 segments received
82645 segments transmitted
313 segments retransmitted
1 active closes
1 passive closes
0 disconnects while awaiting transmission

Permission level: System

Usage: new profile-type [profile-index][-f]

Syntax element Description

profile-type The type of profile you want to create.
profile-index The index value of the profile.
-f Do not prompt for confirmation when issuing a New command
that would overwrite the unsaved contents of the edit buffer .

Stinger Reference Guide 1-39

Stinger Command Reference
New

If you create a new indexed profile without using the profile-index argument, a default
index (usually null or zero) is used. For example:

Profile type Default index

User ""
Serial { any-shelf any-slot 0 }
Ethernet { any-shelf any-slot 0 }
IP-Interface { { any-shelf any-slot 0 } 0 }

If you specify the profile-index on the command line, it is validated before use. For
example:
admin> new sdsl {12 2 3}
error: bad index: unknown value "12"
admin> new system foo
error: profile has no index

If you specify a valid index, it is applied to the new profile, which is read into the edit buffer.
For example:
admin> new sdsl {1 2 3}
SDSL/{ shelf-1 slot-2 3 } read
admin> list
[in SDSL/{ shelf-1 slot-2 3 } (new)]
name=""
physical-address*={ shelf-1 slot-2 3 }
enabled=no
line-config={ 0 0 static { any-shelf any-slot 0 } }

Example: To create a new Connection profile called Tim:

admin> new conn tim
CONNECTION/tim read
admin> list
[in CONNECTION/tim (new)]
station*=tim
active=no
encapsulation-protocol=atm
called-number-type=national
dial-number=""
clid=""
ip-options={ yes yes 0.0.0.0/0 0.0.0.0/0 7 100 255 no no 0 +
session-options={ "" "" no 120 no-idle 120 "" }
telco-options={ ans-and-orig no off 1 no no 56k-restricted 0 +
usrRad-options={ global 0.0.0.0 1646 "" 1 acct-base-10 }
calledNumber=""
admin> write
CONNECTION/tim written

1-40 Stinger Reference Guide

Stinger Command Reference
New

Dependencies: The index you choose might affect the factory default values set in the profile.
For example, if you specify the profile-index default for a User profile, the factory default
permission settings are as follows:
admin> new user default
USER/default read
admin> list
[in USER/default (new)]
name*=default
password=""
active-enabled=yes
allow-termserv=no
allow-system=no
allow-diagnostic=no
allow-update=no
allow-password=no
allow-code=no
allow-debug=no
idle-logout=0
prompt=*
default-status=no
top-status=general-info
bottom-status=log-window
left-status=connection-list
use-scroll-regions=no
log-display-level=none

If you specify admin instead, the factory-default permissions are set as follows:
admin> new user admin
USER/admin read
admin> list
[in USER/admin (new)]
name*=admin
password=MyPW
active-enabled=yes
allow-termserv=yes
allow-system=yes
allow-diagnostic=yes
allow-update=yes
allow-password=no
allow-code=yes
allow-debug=no
idle-logout=0
prompt=*
default-status=no
top-status=general-info
bottom-status=log-window
left-status=connection-list
use-scroll-regions=no
log-display-level=error

Stinger Reference Guide 1-41

Stinger Command Reference
NSlookup

NSlookup
Description: Resolves the IP address of a specified hostname by performing a DNS lookup.
The IP-Global profile must be configured with the address of at least one DNS server. For
information about configuring DNS, see the Stinger Configuration Guide.

Permission level: Diagnostic

Usage: nslookup hostname

Syntax element Description

hostname The hostname for which you want to obtain an IP address.

Example: To look up a host’s IP address in DNS:

admin> nslookup host-231
Resolving host host-231.
IP address for host host-231 is 10.65.12.231.

Permission level: Update

Usage: nvram -f|-t|-u|-c|-?

Option Description
-f Clear NVRAM without prompting for confirmation.
-t Toggle module debug level.
-u Display NVRAM usage statistics.
-c Compact the NVRAM storage.
-? Display a usage summary.

Example: To display memory usage information, specify the -u option:

admin> nvram -u
NVRAM seg[0]:start 14000098 size 258040 avail 191680 cmpct 0

You can enter the command without any arguments to clear NVRAM and reset the unit:
admin> nvram
Clear configuration and reboot? [y/n]

1-42 Stinger Reference Guide

Stinger Command Reference
OAMloop

Dependencies: You must reset the Stinger after clearing NVRAM and reloading a
configuration.

Permission level: Diagnostic

Usage: oamloop -e|-s [-c count][-i sec ] shelf slot vpi vci

Argument Description
–e (End-to-End). Transmit an end-to-end OAM loop cell, to be looped by the
user connection point.
–s (Segment). Transmit a segment OAM loop cell, to be looped by the first
network connection point.
–c count Transmit the specified number of cells. If this argument is not specified, the
count defaults to 0 (zero), which means that the cells are transmitted contin-
uously until the administrator sends an interrupt by pressing Ctrl-C.
–i sec Transmit the cells at the specified interval in seconds. If this argument is
not specified, the interval defaults to one second.
shelf Specifies the shelf in which the OC3 ATM card is located.
slot Specifies the slot in which the OC3 ATM card is located.
vpi Specifies the Virtual Path Identifier (VPI) on which to transmit the
looped-back cells.
vci Specifies the Virtual Channel Identifier (VCI) on which to send the
looped-back cells.

Example: Following is an example OAMloop command line and output:

admin> oamloop -c 10 -e 1 2 1 32
Received our End2End OAM loopback cell, Id=9
Received our End2End OAM loopback cell, Id=10
Received our End2End OAM loopback cell, Id=11
Received our End2End OAM loopback cell, Id=12
Received our End2End OAM loopback cell, Id=13
Received our End2End OAM loopback cell, Id=14
Received our End2End OAM loopback cell, Id=15
Received our End2End OAM loopback cell, Id=16
Received our End2End OAM loopback cell, Id=17
Received our End2End OAM loopback cell, Id=18
--- OAM loop statistics ---
10 cells transmitted, 10 cells received, 0% cell loss

Stinger Reference Guide 1-43

Stinger Command Reference
Open

Open
Description: Each slot card has its own processor, memory, operating system, and set of
debug commands. The Open command sets up a Telnet-like session across the control bus to
one of the slot cards. Then you can execute commands on that slot card.

Permission level: Diagnostic

Usage: open 1..9 [1..16]

Syntax element Description

1..9 The shelf number.
1..16 The number of the expansion slot you want to diagnose.

Example: To open a session with a DS3 card installed in shelf 1, slot 1:

admin> open 1 1

The prompt changes to show your location, and you can list the available commands:
ds3-1/2> ?
? ( user )
auth ( user )
cbcardif ( debug )
checkd ( debug )
clear ( user )
clock-source ( diagnostic )
debug ( diagnostic )
debugd ( debug )
display ( debug )
dp-ram-display ( debug )
dpram-test ( debug )
dspBypassClients ( debug )
dspDial ( debug )
dspSetDddTimeslot ( debug )
fill ( debug )
frreset ( debug )
gdb ( debug )
help ( user )
lifDebug ( debug )
logdebug ( debug )
logtest ( debug )
mibcbagt ( debug )
mibcbreq ( debug )
mibmgr ( debug )
modify ( debug )
nailedState ( debug )
nlcb ( debug )
open ( diagnostic )
quit ( user )
revision ( debug )
slots ( debug )

1-44 Stinger Reference Guide

Stinger Command Reference
Ping

stackLimit ( debug )
stackUsage ( debug )
tdm ( debug )
timedMsgTest ( debug )
tprofmgr ( debug )
tss ( debug )
update ( debug )
version ( system )
whoami ( user )

To return to the shelf controller:

ds3-1/2> quit

Permission level: Diagnostic

Usage: ping [-q|-v][-c count][-i delay ][-s packetsize] hostname

Syntax element Description

-q Quiet. Do not display informational messages. Just display the summary
lines at the beginning and end of the command.
-v Verbose. List every ICMP packet received, except echo_response packets.
-c count Send only the specified number of packets.
-i delay Wait the specified number of seconds before sending the next packet. The
default delay period is one second.
-s Send the specified number of data bytes. The default size is 64 bytes, not
packetsize including the 8-byte ICMP header. The minimum is 16.
hostname The station’s IP address or DNS hostname.

Example: Pinging a host named Host-231 on a local network:

admin> ping host-231
PING host-231 (10.65.12.231): 56 data bytes
64 bytes from 10.65.12.231: icmp_seq=0 ttl=255 time=0 ms
64 bytes from 10.65.12.231: icmp_seq=1 ttl=255 time=0 ms
64 bytes from 10.65.12.231: icmp_seq=2 ttl=255 time=0 ms
64 bytes from 10.65.12.231: icmp_seq=3 ttl=255 time=0 ms
64 bytes from 10.65.12.231: icmp_seq=4 ttl=255 time=0 ms
^C
--- host-231 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max=0/0/0 ms

Stinger Reference Guide 1-45

Stinger Command Reference
Quit

Press Ctrl-C to stop. To exchange only 3 packets, each of which contains only 16 bytes:
admin> ping -c 3 -s 16 host-231
PING host-231 (10.65.12.231): 8 data bytes
16 bytes from 10.65.12.231: icmp_seq=0 ttl=255 time=0 ms
16 bytes from 10.65.12.231: icmp_seq=1 ttl=255 time=0 ms
16 bytes from 10.65.12.231: icmp_seq=2 ttl=255 time=0 ms
--- host-231 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max=0/0/0 ms

To exchange 3 packets and suppress the output for each exchange:

admin> ping -c3 -q host-231
PING host-231 (10.65.12.231): 56 data bytes
--- host-231 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max=0/0/0 ms

Permission level: User

Usage: quit

Example: To terminate the current Telnet session:

admin> quit
Connection closed by foreign host.
my-station%

Read
Description: Reads a copy of the specified profile into the edit buffer, making it the working
profile. If the profile is one of a kind, such as the IP-Global profile, it has no index field. If an
index field exists for a profile, it must be specified on the command line.

Only the working profile can be modified. The Set and List commands apply only to the
working profile.

Note: The working profile remains in the edit buffer until you overwrite the buffer with
another Read command or the New command. To save changes made in the buffer, you must
use the Write command.

Permission level: System

1-46 Stinger Reference Guide

Stinger Command Reference
Read

Usage: read profile-type [profile-index ][-f]

Syntax element Description

profile-type The type of profile to be read (or the profile itself if it does not require
an index specification).
profile-index The name or address that distinguishes a profile from others of the
same type. To see profile indexes, enter the Dir command (dir pro-
file-type).
-f Do not prompt for confirmation when overwriting the unsaved con-
tents of the edit buffer.

By default, when you issue a Read command that would overwrite the contents of the edit
buffer when the buffer contains unsaved changes, the system displays a message prompting for
confirmation. For example:
admin> read connection david
Reading will overwrite the changes you’ve made.
Read anyway? [y/n] y
CONNECTION/david read

You can avoid this prompt by using the –f flag on the Read command line.

Example: To find the right index for an IP-Interface profile, read that profile, and list its
contents:
admin> dir ip-interface
66 12/20/1998 14:02:02 { { shelf-1 slot-12 1 } 0 }
66 12/27/1998 16:34:40 { { shelf-1 slot-12 2 } 0 }
66 12/27/1998 16:34:47 { { shelf-1 slot-12 3 } 0 }
66 12/27/1998 16:34:54 { { shelf-1 slot-12 4 } 0 }
66 12/28/1998 00:21:06 { { shelf-1 controller 1 } 0 }
admin> read ip-int {{1 c 1} 0}
IP-INTERFACE/{ { shelf-1 controller 1 } 0 } read
admin> list
[in IP-INTERFACE/{ { Shelf-1 controller 1} 0 }]
interface-address*={ { shelf-1 controller 1 } 0 }
ip-address=10.6.212.227/24
rip-mode=routing-send-and-recv

The profile remains in the edit buffer until another Read command or a New command
overwrites the buffer. The Set command modifies the profile. The Write command saves
changes without clearing the buffer.
admin> set ip-address=10.6.212.228/24
admin> write
IP-INTERFACE/{ { shelf-1 controller 1 } 0 } written

Stinger Reference Guide 1-47

Stinger Command Reference
Refresh

The working profile is represented by a period character. Even after you have used the Get
command to display other profiles, or have executed other commands, you can still use the Get
command to display the working profile:
admin> get .
[in IP-INTERFACE/{ { Shelf-1 controller 1} 0 }]
interface-address*={ { shelf-1 controller 1 } 0 }
ip-address=10.6.212.228/24
rip-mode=routing-send-and-recv

Permission level: System

Usage: refresh -a|-n|-p|-r|-t

Option Description
-a Refresh all types of configuration.
-n Refresh nailed profiles configuration.
-r Refresh static routes configuration.
-t Refresh terminal server configuration.
-s Clears the current Source Auth information (purging all existing
Source Auth entries from the cache) and reloads it from RADIUS.

Reset
Description: Resets the Stinger. When you reset the unit, it restarts, and all active connections
are terminated. All users are logged out and the default security level is reactivated. In
addition, a system reset can cause a WAN line to temporarily be shut down due to momentary
loss of signaling or framing information. After a reset, the Stinger runs POST (power-on self
tests).

Permission level: Update

Usage: reset [-f]

Option Description
-f Force a reset without prompting for confirmation.

Example: To reset the unit:

admin> reset

1-48 Stinger Reference Guide

Stinger Command Reference
Save

Save
Description: Saves configuration information to a file. The file may reside either on the hard
disk of the PC you are using to issue commands to the Stinger or on a networked host. The file
is saved in a format that can be loaded into the Stinger to restore a configuration. The Save
command uses TFTP to transfer the configuration across the network. To save the Stinger
configuration on a remote host, you must have the necessary permissions in the directory.

Permission level: Update

Usage: save [-a|-m] target [profile-type [profile-index]]

Syntax element Description

-a Explicitly save all fields, even those with default values. If you do not
specify this option, the file stores only those fields whose values have
been changed from the default.
-m Use MIB tags instead of field and value names, and use profile-type
numbers rather than profile-type text names.
target The destination of the file to be saved. Valid specifications are:
• network host filename— A network hostname or IP address
and the path to the file on that host.
• console— The PC you are using in a terminal session.
profile-type The type of profile to be read, or the profile itself if it does not require
an index specification.
profile-index The name or address that distinguishes a profile from others of the
same type. To see profile indexes, enter the Dir command (dir pro-
file-type).

Example: Saving all Connection profiles to a file on a PC’s hard disk (after starting the
capture utility in the VT100 emulation software):
admin> save console connection
; saving profiles of type CONNECTION
; profile saved Thu Jan 2 13:02:54 1999
new CONNECTION dallas
set active=yes
set ip-options remote-address=10.122.99.1/24
write -f
;

Stinger Reference Guide 1-49

Stinger Command Reference
Save

; profile saved Thu Jan 2 13:02:54 1999

new CONNECTION chicago
set active=yes
set dial-number=999
set ip-options remote-address=10.168.6.57/24
set ip-options routing-metric=2
write -f
;

To save the file, stop the capture in the VT100 emulation software. To save the entire
configuration to hard disk, start the capture utility and specify the console option:
admin> save console
; saving all profiles
...

All configured profiles and parameters scroll to the capture buffer. When the entire
configuration has been displayed, the following output appears:
;
;
; all profiles saved

To save the file, stop the capture. The following example shows how to save a specific profile
to a file on a network host:
admin> save network host-231 /users/marcel/ipglobal ip-g
configuration being saved to 10.65.12.231
file /users/marcel/ipglobal...save
admin>

The following example shows how to specify a profile type by its internal number when
saving:
admin> save -m console system
; saving profiles of type SYSTEM
; profile saved Sat Mar 29 13:29:42 1998
new 3
set 1=1
set 2=eng-lab-43
write -f

Note: If the first item following a New, Read, or Dir command is numeric, it is assumed to be
a profile-type number.

1-50 Stinger Reference Guide

Stinger Command Reference
Screen

Screen
Description: Changes window display sizes for the current session only.

Permission level: Update

Usage: screen screen-length [status-length ]

Syntax element Description

screen-length The number of lines displayed in the command-line window. The
default is 24 lines, which is the minimum size. The maximum size is
999 lines
status-length The number of lines displayed in the Status window, including dividing
lines. The default is 18 lines, which is the minimum size. The maxi-
mum size is 993 lines. The status-length value must be less than
the screen-length by at least six lines

If the Status window is open when you execute the Screen command, the window is resized
dynamically. If it is not open, the Status window is resized when you next open it.

Example: admin> screen 55 22

If only the screen-length argument is specified, and the stored status-length is not
less than the specified value by 6 lines, the status-length is automatically adjusted. This
scenario is demonstrated in the following example:
admin> screen 55 22
new screen-length 55
new status-length 22
admin> screen 24
error: screen-length conflict, adjusting status-length from 22
to 18
new screen-length 24
new status-length 18

SDSLlines
Description: Displays SDSL channel information.

Permission level: System

Usage: sdsllines -a|-d|-f|-u

Option Description
-a Display all available channels.
-d Display all disabled channels.
-f Display all possible channels.
-u Display all in-use channels.

Stinger Reference Guide 1-51

Stinger Command Reference
SDSLlines

Example: To display all SDSL channels available, use the -a option:

admin> sdsllines -a

All SDSL lines:

(dvOp dvUpSt dvRq sAdm nailg)
Line { 1 3 1 } (Up Idle UP UP 00001)
Line { 1 3 2 } (Up Assigned UP UP 00002)
Line { 1 3 3 } (Up Assigned UP UP 00003)
Line { 1 3 4 } (Up Idle UP UP 00004)
Line { 1 3 5 } (Up Idle UP UP 00005)
Line { 1 3 6 } (Up Assigned UP UP 00006)
Line { 1 3 7 } (Up Idle UP UP 00007)
Line { 1 3 8 } (Up Assigned UP UP 00008)
Line { 1 3 9 } (Up Assigned UP UP 00009)
Line { 1 3 10 } (Up Assigned UP UP 00010)
Line { 1 3 11 } (Up Assigned UP UP 00011)
Line { 1 3 12 } (Up Assigned UP UP 00012)
Line { 1 3 13 } (Up Assigned UP UP 00013)
Line { 1 3 14 } (Up Assigned UP UP 00014)
Line { 1 3 15 } (Up Assigned UP UP 00015)
Line { 1 3 16 } (Up Idle UP UP 00016)

The data displayed includes the physical address and channel number, and the following status
information about each channel:

Column Description
dvOp The current operational state of the channel (also specified by Device-State):
• Down indicates that the channel is in a nonoperational state.
• Up indicates that the channel is in normal operations mode.
dvUpSt The status of the channel in normal operations mode:
• Idle indicates that no call is on the line.
• Active indicates that the channel is handling a call.
dvRq The required state of the channel as specified by the Reqd-State setting:
• Down indicates that the channel is required to be nonoperational.
• Up indicates that the channel is required to be in normal mode.
sAdm The desired administrative state of the channel (also specified by
Desired-State):
• Down specifies that the channel should terminate all operations and enter
the down state.
• Up specifies that the channel should come up in normal operations mode.
The actual state of the channel can differ from the desired state, as when a
device is powering up, or you change the desired state on a running slot.
Changing the desired state does not force a channel to the new state. It indi-
cates that the Stinger should change the channel state in a graceful manner.
nailg The nailed group to which the line is assigned.

1-52 Stinger Reference Guide

Stinger Command Reference
Set

Set
Description: Sets a parameter’s value or displays help text for a parameter in the current or
specified context of the working profile. To save the new setting, you must write the profile.

Permission level: System

Usage: set param-name [param-index] [subprofile]=value|?

Syntax element Description

param-name Name of the parameter in the current or specified context of the work-
ing profile.
param-index Parameter index, which might be required for some complex or array
parameters. (See the Physical-Address example below.)
subprofile Subprofile name within the working profile. By specifying its name on
the command line, you can set a parameter in a subprofile without
opening the subprofile.
value Legal parameter value.
? Display help text about the specified parameter.

Permission level: System

Usage: show shelf-number [slot-number [item-number]]

Syntax element Description

shelf-number The number of a Stinger shelf.
slot-number The number of an expansion slot in the specified shelf (1–16).
item-number The number of a specific item (device or channel) on the slot card.

Example: To display all installed modules:

admin> show 1
Shelf 1 ( standalone ):
{ shelf-1 slot-4 0 } UP al-dmtadsl-atm-card
{ shelf-1 slot-6 0 } UP sdsl-atm-card

Stinger Reference Guide 1-53

Stinger Command Reference
Slot

The output includes the address of each slot in which an expansion slot card is installed, the
status of the card, and the type of card installed. The status can be one of the following:

Status Description
UP Normal operational mode. The card is up and running.
DOWN Not in an operational mode. The card has shut down all functions and can be
downed by the shelf controller.
POST The download is complete, and the devices in the card are running power-on
self tests.
BOOT The card is running BOOT code. Under normal conditions, the LOAD status
follows.
LOAD The card is loading code as part of coming up.
RESET The card is being reset.
NONE The card has been swapped out, but its configuration remains in flash space.
OCCUPIED The card is using two slots.

Permission level: Diagnostic

Usage: slot -u|-d|-r|-t|-b|? [shelf-number ] slot-number]

Syntax element Description

-u Bring up the specified slot card.
-d Bring down the specified slot card.
-r Delete the profiles for a card that has been removed.
-t Toggle module debug level.
-b Force hardware reset.
-w Change or display watchdog failure limit.
-? Display a usage summary.
shelf-number The number of a Stinger shelf.
slot-number The number of an expansion slot in the specified shelf (1–16).

1-54 Stinger Reference Guide

Stinger Command Reference
Status

Example: To bring up the expansion module in slot 5:

admin> slot -u 5
slot 1/5 state change forced

In the next example, a card has been removed, as indicated by a status of NONE in the output
of the Show command:
admin> show 1 4
Shelf 1 ( standalone ):
{ shelf-1 slot-4 0 } UP al-dmtadsl-atm-card:
{ shelf-1 slot-4 1 } UP xdsl-12-line1
{ shelf-1 slot-4 2 } UP xdsl-12-line-2
{ shelf-1 slot-4 3 } UP xdsl-12-line-3
{ shelf-1 slot-4 4 } UP xdsl-12-line-4
{ shelf-1 slot-4 5 } UP xdsl-12-line-5
{ shelf-1 slot-4 6 } UP xdsl-12-line-6
{ shelf-1 slot-4 7 } UP xdsl-12-line-7
{ shelf-1 slot-4 8 } UP xdsl-12-line-8
{ shelf-1 slot-4 9 } UP xdsl-12-line-9
{ shelf-1 slot-4 10 } UP xdsl-12-line-10
{ shelf-1 slot-4 11 } UP xdsl-12-line-11
{ shelf-1 slot-4 12 } NONE xdsl-12-line-12
{ shelf-1 slot-4 13 } xdsl-12-virt-device

The NONE status indicates that the card was removed but that its profiles have been saved.
The Stinger remembers that a card was in that slot and saves its profiles until a card of a
different type is installed in the same slot, or until you delete the profile:
admin> slot -r 4
slot 1/4 removed

Either action deletes all the old profiles associated with the slot. When you insert a different
type of card, the system creates appropriate new profiles.

Permission level: System

Usage: status [on|off]

Syntax element Description

on Display the status windows.
off Hide the status windows.

Stinger Reference Guide 1-55

Stinger Command Reference
Telnet

Example: To display status windows:

admin> status
or
admin> status on

2 Connections Status
001 tomw TCP 1/7/14 19200 Serial number: 6201732 Version: 1.0F
002 timl TCP 1/7/3 56000
Rx Pkt: 11185897
Tx Pkt: 42460
Col: 129

12/26/1998 12:20:15 Up: 3 days, 21:47:32

M: 29 L: info Src: shelf-1/controller

Issued: 16:48:02, 09/27/1998

[Next/Last Conn: <dn/up arw>, Next?Last Page: <pg dn/up>, Exit: <esc>]

To hide the windows:

admin> status
or
admin> status off

Permission level: Diagnostic

Usage: telnet [-a|-b|-t][-l[e]|-r[e]] hostname [portnumber]

Syntax element Description

-a ASCII mode, or standard 7-bit mode. In 7-bit mode, bit 8 is set to 0 (zero).
This value is the default if no other mode is specified.
-b Binary mode. The Stinger attempts to negotiate the Telnet 8-bit binary
option with the server at the remote end. You can run X-Modem and other
8-bit file transfer protocols in this mode.
-t Transparent mode. You can send and receive binary files, and run the same
file-transfer protocols, without having to be in Binary mode.
-l[e] Local echo. As you type a line, it echoes on your terminal screen, but is not
actually transmitted until you enter a carriage return.
-r[e] Remote echo. Turn local echo off.
hostname The IP address or DNS name of a networked host.
portnumber A port number for Telnet sessions. The default port is 23.

1-56 Stinger Reference Guide

Stinger Command Reference
Terminal-Server

Example: To open a Telnet session to Host-231:

admin> telnet host-231
Connecting to host-231 (10.65.12.231)...
Escape character is ’^]’
Connected

You can also open a session after starting the Telnet program. To display the available
commands:
admin> telnet
telnet> ?
? Displays this information.
help " " "
open Connect to a site.
quit Quit Telnet.
close Close current Telnet connection.
send Send Telnet command. Type ’send ?’ for help.
set Set special char. Type ’set ?’ for help.

Note: During an open Telnet connection, type Ctrl-] to display the telnet> prompt and the
Telnet command-line interface. Any valid Telnet command returns you to the open session.
Note that Ctrl-] does not function in binary mode Telnet. If you log into the Stinger by Telnet,
you might want to change its escape sequence from Ctrl-] to a different setting.

Permission level: Termserv

Usage: terminal-server

Example: To enter terminal-server mode and display the list of available commands:
admin> terminal-server
admin% ?
? Display help information
help " " "
quit Closes terminal server session
hangup " " " "
local Go to local mode
remote remote <station>
set Set various items. Type ’set ?’ for help
show Show various tables. Type ’show ?’ for help
iproute Manage IP routes. Type ’iproute ?’ for help
telnet telnet [-a|-b|-t] <host-name> [<port-number>]
tcp tcp <host-name> <port-number>
ping ping <host-name>
traceroute Trace route to host. Type ’traceroute -?’ for help
rlogin rlogin [-l user -ec] <host-name>

Stinger Reference Guide 1-57

Stinger Command Reference
Traceroute

To exit terminal server mode:

admin% quit
admin>

Permission level: Diagnostic

Usage: traceroute [-n] [-v] [-m max_ttl] [-p port] [-q nqueries]
[-w waittime] [-s src_IPaddr ] hostname [datasize]

Syntax element Description

-n Print hop addresses numerically rather than symbolically and numeri-
cally (this eliminates a nameserver address-to-name lookup for each
gateway found on the path).
-v Verbose output. Include received ICMP packets other than Time
Exceeded and ICMP Port Unreachable.
-m max_ttl Set the maximum time-to-live (maximum number of hops) used in
outgoing probe packets. The default is 30 hops.
-p port Set the base UDP port number used in probes. If a device is listening
on a port in the default range, this option can be used to pick an unused
port range. The default is 33434.
-q nqueries Set the maximum number of queries for each hop. The default is 3.
-w waittime Set the time to wait for a response to a query. The default is 3 seconds.
-s src_IPaddr The IP address of the source host.
hostname The IP address or DNS name of a networked host.
datasize Set the size of the data field of the UDP probe datagram sent by Trac-
eroute. The default is 0. This results in a datagram size of 38 bytes (a
UDP packet carrying no data).

1-58 Stinger Reference Guide

Stinger Command Reference
Uptime

Example: To trace the route to Host-231:

admin> traceroute host-231
traceroute to host-231 (10.65.12.231), 30 hops max, 0 byte packets
1 host-231.abc.com (10.65.12.231) 0 ms 0 ms 0 ms

To perform the same trace, but with a maximum TTL of 60 hops:

admin> traceroute -m 60 host-231
traceroute to host-231 (10.65.12.231), 60 hops max, 0 byte packets
1 host-231.abc.com (10.65.12.231) 0 ms 0 ms 0 ms

The following annotations can appear after the time field:

Annotation Description
!H Host reached.
!N Network unreachable.
!P Protocol unreachable.
!S Source route failed. This event should not occur, and might indicate
that there is a problem with the associated device.
!F Fragmentation needed. This event should not occur, and might indi-
cate that there is a problem with the associated device.
!? An ICMP subcode. This event should not occur.
!?? Reply received with inappropriate type. This event should not occur.

Permission level: System

Usage: uptime [[-a]|[[shelf] slot ]]

Syntax element Description

No arguments Display the system uptime.
-a Display the uptime for all slot cards.
slot Display the uptime for the specified slot card on the master shelf.
shelf slot Display the uptime for the slot card specified by shelf and slot.

Stinger Reference Guide 1-59

Stinger Command Reference
Userstat

Example: The following example shows the uptime for all slot cards in the Up state. (Cards
that are not in the Up state are not reported.)
admin> uptime -a
17:50:44
{ shelf-1 slot-4 } al-dmtadsl-atm-card 0 days 02:45:42 8.0a0e0
{ shelf-1 slot-6 } sdsl-atm-card 0 days 02:45:48 8.0a0e0
{ shelf-1 control-module } shelf-controller 0 days 02:47:05 8.0a0e0

To enable network management stations to obtain uptime information, the following SNMP
variable has been added to the Ascend Enterprise MIB:
slotLastChange OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION "The value of sysUpTime at the time the slot card
entered its current state."
::= { slotEntry 9 }

The slotLastChange variable reports the value of sysUpTime at the time the slot card
entered its current state.

Userstat
Description: Displays user session status.

Permission level: System

Usage: userstat [-s|-l|-d|-k sessionid ]

Syntax element Description

-s Show session information in an 80-character-wide format (the default).
-l Show enhanced status information in a 140-character-wide format.
-d Dump the output to the display, rather than show it one page at a time.
-k sessionid Terminate a user session that uses SLIP, Telnet, Telnet binary, Raw
TCP, or the terminal server. The -k option does not terminate DTPT
service types.

Example: To display user session status:

admin> userstat
SessionID Line/Chan Slot:Item Tx/Rx Rate Svc Address Username
228687860 1.01.02/01 1:03:01/01 56K/56K TCP 10.100.0.1 barney
228687861 1.02.03/02 1:04:02/00 28800/33600 TCP 10.168.6.24 jake
<end user list> 2 active user(s)

1-60 Stinger Reference Guide

Stinger Command Reference
Userstat

The output contains the following fields:

Field Description
SessionID Unique ID assigned to the session.
Line/Chan Physical address (shelf.slot.line/channel) of the network port on which the
connection was established.
Slot:Item Shelf:slot:item/logical-item of the host port to which the call was routed.
Tx/Rx Rate Transmit and receive rates.
Svc Type of service in use for the session. Following are the possible values:
--- (The service is being negotiated.)
SLP (Serial Line IP)
TLN (Telnet)
BTN (Binary Telnet)
TCP (raw TCP)
TRM (Terminal Server)
VCN (Virtual Connect)
DTP (DTPT)
Dialed# The number dialed to initiate this session.
(displays only
with -l option)
ConnTime The amount of time (in hours:minutes:seconds format) since the session was
(displays only established.
with -l option)
IdleTime The amount of time (in hours:minutes:seconds format) since data was last
(displays only transmitted across the connection.
with -l option)

To terminate a user session, include the -k option and session ID with the Userstat command.
For example:
admin> userstat
SessionID Line/Chan Slot:Item Rate Svc Address Username
246986325 1.01.02/01 1:13:01/000 33600 TCP 100.100.8.2 100.100.8.2
<end user list> 1 active user(s)
admin> userstat -k 246986325
Session 246986325 cleared

Stinger Reference Guide 1-61

Stinger Command Reference
Version

Version
Description: Displays the current system software version.

Permission level: System

Usage: version

Example: To display the current system software version:

admin> version
Software version 1.2

View
Description: Changes the information displayed in the top or bottom status window.
Permission level: System
Usage: view position status-type

Syntax element Description

position The window position may be top, bottom, or left, indicating
which area of the status window will be affected by the command.
status-type If the specified window position is top or bottom, the window can
display one of the following types of status information:
• general (general status information)
• log (the 32-message log buffer)
• line (line and channel status)
If the specified window position is left, the window can display one
of the following types of status information:
• connection (WAN connection status)
• session (management status)

Example: To display session information:

admin> view left session

4 Sessions 1/13/8 RA ........ ........ ........

0 - serial - admin
1 - telnet - tommy
2 - telnet - super
3 - telnet - pubs

M: 48 L: info Src: shelf-1/controller

Issued: 16:48:02, 09/27/1998

[Next/Last Conn:<dn/up arw>, Next?Last Page: <pg dn/up>, Exit: <esc>]

1-62 Stinger Reference Guide

Stinger Command Reference
Which

Permission level: System

Usage: which [-p group |-n port]

Syntax element Description

-p group Specifies the port associated with the nailed-group indicated by
group.
-n port Specifies the nailed-up group associated with the port indicated by
port.

Example: admin> which -n {1 4 5}

Nailed group corresponding to port { shelf-1 slot-4 5 } is 155
admin> which -n {1 17 2}
Nailed group corresponding to port { shelf-1 trunk-module-1 1 } is 802

You can use the which command to determine which port is in use when you have the
nailed-group assignment of a Connection profile. For example, if the circuit uses nailed-group
296:
admin> which -p 296
The port corresponding to nailed group 296 is: { shelf-1 slot-6 46 }

If the argument specifies a slot that is not populated, or a nailed-group that is not assigned, the
command returns a message that the number was not found. For example:
admin> which -p 43
The port corresponding to nailed group 43 is:
NONE!

If more than one port has the same nailed group associated with it (which is illegal), the
which command returns all the ports that have this nailed group. Using the which command
can be a convenient way to find duplicate nailed-groups. For example:
admin> read sdsl {1 6 46}
SDSL/{ shelf-1 slot-6 46 } read

admin> set line-config nailed-group=801

admin> write
SDSL/{ shelf-1 slot-6 46 } written

admin> which -p 801

The port corresponding to nailed group 801 is:
{ shelf-1 slot-6 46 }
{ shelf-1 trunk-module-1 1 }

Stinger Reference Guide 1-63

Stinger Command Reference
Whoami

Duplicate nailed-group assignments can occur only when the administrator changes default
nailed-group numbers. To fix the problem, change the nailed-group assignments in one or
more profiles, and then verify by using the which command again.

Whoami
Description: Displays the name of the User profile associated with the current session.

Permission level: User

Usage: whoami

Example: To display the name of your User profile:

admin> whoami
tommy

Permission level: Update

Usage: write [-f]

Syntax element Description

-f Force the write without prompting for confirmation, overwriting an
existing profile if one exists with the same index.

If you issue a Write command when the current profile has not been modified from the saved
version, the write does not occur and the following message is displayed:
admin> write
Nothing new to write; nothing written.

You can force the write to occur by using the –f flag on the Write command line. Note that the
write always occurs if the profile has not been written previously.

1-64 Stinger Reference Guide

Stinger Command Reference
Write

Example: To create a new Connection profile, modify it, and write it to NVRAM:
admin> new conn newyork
CONNECTION/newyork read
admin> list
[in CONNECTION/newyork (new)]
station*=newyork
active=no
encapsulation-protocol=atm
called-number-type=national
dial-number=""
clid=""
ip-options={ yes yes 0.0.0.0/0 0.0.0.0/0 7 100 255 no no 0 +
session-options={ "" "" no 120 no-idle 120 "" }
telco-options={ ans-and-orig no off 1 no no 56k-restricted 0 +
usrRad-options={ global 0.0.0.0 1646 "" 1 acct-base-10 }
calledNumber=""
admin> write
CONNECTION/newyork written

Stinger Reference Guide 1-65

Stinger Profile and Parameter Reference
2
A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-36

C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-44

D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-59

E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-71

F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-79

G. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-84

H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-85

I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-88

L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-101

M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-114

N. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-125

O. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-129

P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-132

Q. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-145

R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-147

S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-165

T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-205

U. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-220

V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-228

W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-234

Y. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-236

Stinger Reference Guide 2-1

Stinger Profile and Parameter Reference
A

A
AAL-Type
Description: Specifies the type of ATM Adaptation Layer (AAL) in use for the contract.

Usage: AAL-5 (the default) specifies AAL Type 5, which provides variable bit-rate service.
This setting is the only one supported on the unit.

Dependencies: If Encapsulation-Protocol is not set to ATM or ATM-Circuit, AAL-Type does

not apply.

Location: ATM-QoS

Usage: Specify an integer from 0 to 60. The default is 0 (zero).

Example: set acct-checkpoint=30

Location: External-Auth > Rad-Acct-Client

Usage: Specify Yes or No. The default is No.

• Yes specifies that RADIUS Accounting Stop packets are dropped for connections that fail
authentication.
• No specifies that RADIUS Accounting Stop packets are sent for connections that fail
authentication.

Example: set acct-drop-stop-on-auth-fail=yes

Location: External-Auth > Rad-Acct-Client

2-2 Stinger Reference Guide

Stinger Profile and Parameter Reference
Acct-Host

Acct-Host
Description: Specifies a RADIUS accounting server for the Stinger to use for the connection.

Usage: Enter the IP address of a RADIUS accounting server. The default is 0.0.0.0, which
causes the Stinger to look for an accounting server at the address specified by the
External-Auth profile.

Example: set acct-host=10.9.8.2/24

Location: Connection station > UsrRad-Options

Usage: Specify one of the following values:

• Acct-Base-10 (the default) specifies a decimal base.
• Acct-Base-16 specifies a hexadecimal base.

The value you specify controls how the Stinger presents the Acct-Session-ID attribute to the
accounting server.

Example: set acct-id-base=acct-base-10

Dependencies: Consider the following:

• If Acct-Type does not specify RADIUS, Acct-ID-Base does not apply.
• Changing the value of Acct-ID-Base while accounting sessions are active results in
inconsistent reporting between the Start and Stop records.
• The Acct-Session-ID attribute is defined in section 5.5 of the RADIUS accounting
specification.

Location: Connection station > UsrRad-Options, External-Auth > Rad-Acct-Client

Stinger Reference Guide 2-3

Stinger Profile and Parameter Reference
Acct-Key

Acct-Key
Description: Specifies a RADIUS shared secret. A shared secret acts as a password between
the Stinger and the accounting server.

Usage: Specify the text of the shared secret. The value you specify must match the value in
the RADIUS clients file. If you specify a null value, the system logs the following
warning:
warning: acct-key is empty (bad for security)

Example: set acct-key=mypw

Dependencies: If Acct-Type does not specify RADIUS, Acct-Key does not apply.

Location: Connection station > UsrRad-Options, External-Auth > Rad-Acct-Client

Example: set acct-limit-retry=10

Location: External-Auth > Rad-Acct-Client

2-4 Stinger Reference Guide

Stinger Profile and Parameter Reference
Acct-Port

Acct-Port
Description: Specifies the UDP destination port to use for external accounting requests.
When using RADIUS accounting, you can set Acct-Port globally and for each connection.

Usage: Specify a UDP port number from 1 to 32767. The value must match the port number
the accounting daemon uses. For RADIUS, the default in a Connection profile is 1646, and the
default in the External-Auth profile is 0 (zero).

Example: set acct-port=1500

Dependencies: If Acct-Type does not specify RADIUS, Acct-Port does not apply.

Location: Connection station > UsrRad-Options, External-Auth > Rad-Acct-Client

Usage: Specify one of the following settings:

• Old-Ascend (the default) specifies that the Stinger does not send the Vendor-Specific
attribute to the RADIUS server and does not recognize the Vendor-Specific attribute if the
server sends it.
• Vendor-Specific specifies that the Stinger uses the Vendor-Specific attribute to
encapsulate Lucent vendor attributes, and uses the RFC-defined User-Password
encryption algorithm as well.

Example: set acct-radius-compat=vendor-specific

Location: External-Auth > Rad-Acct-Client

Example: set acct-reset-time=60

Dependencies: For Acct-Reset-Time to apply, you must specify at least one value for
Acct-Server-N.

Location: External-Auth > Rad-Acct-Client

Stinger Reference Guide 2-5

Stinger Profile and Parameter Reference
Acct-Server-N (N=1–3)

Example: set acct-server-1=10.2.3.4/24

Dependencies: Consider the following:

• If Acct-Type does not specify RADIUS, Acct-Server-N does not apply.
• If the Stinger connects to a server other than server #1, and Acct-Reset-Time=0, the
Stinger continues to use that server until it fails to service requests, even if the first server
comes back online. If Acct-Reset-Time is set to a value other than 0 (zero), the Stinger
returns to using the primary accounting server after the number of seconds specified by
Acct-Reset-Time has elapsed.

Location: External-Auth > Rad-Acct-Client

See Also: Acct-Drop-Stop-On-Auth-Fail, Acct-ID-Base, Acct-Key, Acct-Limit-Retry,

Acct-Port, Acct-Reset-Time, Acct-Sess-Interval, Acct-Src-Port, Acct-Stop-Only,
Acct-Timeout, Acct-Type, Rad-Acct-Client

Acct-Sess-Interval
Description: Specifies the number of seconds between RADIUS accounting reports recording
the number of open sessions.

Usage: Specify a number of seconds from 0 to 65535. The default is 0 (zero), which turns off
regular RADIUS open-session reports.

Example: set acct-sess-interval=15

Dependencies: If Acct-Type does not specify RADIUS, Acct-Sess-Interval does not apply.
Acct-Sess-Interval has no effect unless the Lucent RADIUS daemon is running.

Location: External-Auth > Rad-Acct-Client

See Also: Acct-Drop-Stop-On-Auth-Fail, Acct-ID-Base, Acct-Key, Acct-Limit-Retry,

Acct-Port, Acct-Reset-Time, Acct-Server-N (N=1–3), Acct-Src-Port, Acct-Stop-Only,
Acct-Timeout, Acct-Type, Rad-Acct-Client

2-6 Stinger Reference Guide

Stinger Profile and Parameter Reference
Acct-Src-Port

Acct-Src-Port
Description: Represents the UDP source port to use for RADIUS accounting.

Usage: Specify a value from 0 to 65535. The default is 0 (zero), which specifies that the
Stinger selects the source port from the nonprivileged port range (1024–2000).

Example: set acct-src-port=3278

Dependencies: The Stinger uses the source port number to demultiplex the RADIUS reply
packets to the appropriate slot cards. The system uses a separate source port for each slot card
and shelf controller. On the Stinger, the actual source port is the value of Acct-Src-Port plus the
slot number, where the slot number is 0 (zero) for the shelf controller. So, if you set
Acct-Src-Port to 1000, packets originating from the shelf controller have a source port value of
1000, while packets originating from slot 6 have a source port value of 1006.

Location: External-Auth > Rad-Acct-Client

See Also: Acct-Drop-Stop-On-Auth-Fail, Acct-ID-Base, Acct-Key, Acct-Limit-Retry,

Acct-Port, Acct-Reset-Time, Acct-Server-N (N=1–3), Acct-Sess-Interval, Acct-Stop-Only,
Acct-Timeout, Acct-Type, Rad-Acct-Client

Acct-Stop-Only
Description: Specifies whether the Stinger should send an Accounting Stop packet that does
not contain a user name. (At times, the Stinger can send an Accounting Stop packet to the
RADIUS server without having sent an Accounting Start packet. These Stop packets have no
user name.)

Usage: Specify Yes or No. Yes is the default.

• Yes specifies that the Stinger should send an Accounting Stop packet even if it does not
contain a user name.
• No specifies that the Stinger should not send an Accounting Stop packet if it does not
contain a user name.

Example: set acct-stop-only=no

Location: External-Auth > Rad-Acct-Client

See Also: Acct-Drop-Stop-On-Auth-Fail, Acct-ID-Base, Acct-Key, Acct-Limit-Retry,

Acct-Port, Acct-Server-N (N=1–3), Acct-Sess-Interval, Acct-Src-Port, Acct-Timeout

Stinger Reference Guide 2-7

Stinger Profile and Parameter Reference
Acct-Timeout

Acct-Timeout
Description: Specifies the amount of time (in seconds) that the Stinger waits for a response to
a RADIUS accounting request. You can set Acct-Timeout globally and for each connection.

If it does not receive a response within the specified time, the Stinger sends the accounting
request to the next server specified by Acct-Server-N. If all RADIUS accounting servers are
busy, the Stinger stores the accounting request and tries again at a later time. It can queue up to
154 requests.

Usage: Specify an integer from 1 to 10. The default for a Connection profile is 1. The default
for the External-Auth profile is 0 (zero).

Example: set acct-timeout=5

Dependencies: If Acct-Type does not specify RADIUS, Acct-Timeout does not apply.

Location: Connection station > UsrRad-Options, External-Auth > Rad-Acct-Client

See Also: Acct-Drop-Stop-On-Auth-Fail, Acct-ID-Base, Acct-Key, Acct-Limit-Retry,

Acct-Port, Acct-Reset-Time, Acct-Server-N (N=1–3), Acct-Sess-Interval, Acct-Src-Port,
Acct-Stop-Only, Acct-Type, Rad-Acct-Client, UsrRad-Options

Acct-Type
Description: Specifies whether to use RADIUS accounting or no accounting at all. You can
specify accounting globally and for each connection.

Usage: To enable or disable accounting in the External-Auth profile, specify one of the
following values:
• None (the default) disables accounting.
• RADIUS enables RADIUS accounting.

To set accounting policy for a particular connection, specify one of the following values in the
Connection profile:
• Global (the default) specifies that the Stinger sends accounting information to one of the
accounting servers specified by the External-Auth profile.
• Local specifies that the Stinger sends accounting information to the accounting server
specified by Acct-Host in the Connection profile.
• Both specifies that the Stinger sends accounting information to both the global and local
servers.

Example: set acct-type=acct-radius

2-8 Stinger Reference Guide

Stinger Profile and Parameter Reference
Accum-Bit-Err

Dependencies: Consider the following:

• If you set Auth-Type=RADIUS/Logout, the Stinger disables RADIUS accounting. For
Acct-Type to have any effect in a Connection profile, you must set Auth-Type to
RADIUS.
• If you set Acct-Type to RADIUS, you must set Acct-Server to specify at least one
accounting server, and that server must be running a version of the daemon that
specifically supports accounting.

Location: Connection station > UsrRad-Options, External-Auth

Usage: The Accum-Bit-Err value is read only.

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Status

Location: Alarm name

Stinger Reference Guide 2-9

Stinger Profile and Parameter Reference
Active

Active
Description: Activates an interface or feature. An active interface is available for use.

Usage: Specify Yes or No. The default is No.

• Yes activates the interface or feature. In the BOOTP-Relay subprofile, setting Active=Yes
enables the Stinger to forward BOOTP requests and responses between specified BOOTP
servers and booting hosts on any of the Stinger unit’s IP interfaces.
• No makes the interface or feature unavailable for use.

Example: set active=yes

Location: Connection station > IP-Options > TOS-Options, IP-Global > BOOTP-Relay

Usage: Specify Yes or No. The default is No.

• Yes enables the User profile.
• No disables the User profile.

Example: set active-enabled=yes

Location: User name

Example: set active-route=yes

Dependencies: The default route for an IP-Route profile always has the name default and
a destination address of 0.0.0.0/0. To activate the default route, you must set Gateway-Address
to the IP address of the default router, and set Active-Route=Yes.

Location: IP-Route name

2-10 Stinger Reference Guide

Stinger Profile and Parameter Reference
Active-Upstream-Bandwidth-On-Trunks

Active-Upstream-Bandwidth-On-Trunks
Description: Indicates active trunk-side bandwidth, based on the number of trunk ports and
their status.

Usage: The Active-Upstream-Bandwidth-On-Trunks value is read only.

Example: active-upstream-bandwidth-on-trunks=155540

Location: Bandwidth-Stats

Stinger Reference Guide 2-11

Stinger Profile and Parameter Reference
Advanced-Agent-Enabled

Advanced-Agent-Enabled
Description: Indicates whether the Advanced MIB is in use. The Advanced MIB is the name
of the SNMP MIB previously called the WAN MIB.

Usage: The Advanced-Agent-Enabled setting is read only. Yes indicates that the Advanced
MIB is in use. No indicates that the Advanced MIB is not in use.

Example: advanced-agent-enabled=yes

Location: Base

Location: DS3-ATM {shelf-N slot-N N}, OC3-ATM-Stat {shelf-N trunk-module-N N}

2-12 Stinger Reference Guide

Stinger Profile and Parameter Reference
Alarm

Alarm
Description: A profile that enables you to configure the unit’s LEDs and alarm relays to
respond to specific conditions.

Usage: To make Alarm the working profile and list its contents, use the Read and List
commands. For example:
admin> read alarm robin
ALARM/robin read
admin> list
[in ALARM/robin]
name*=robin
enabled=no
event=line-state-change
physical-address={ any-shelf any-slot 0 }
action={ off off off 0 off 0 }

You can then use the Set command to modify the settings in the profile. To close the profile
and save your changes:
admin> write
ALARM/robin written

Alarm event Indicates that the unit

coldStart Is reinitializing itself in such a way that it might alter the configura-
(RFC-1215 trap-type 0) tion of either the SNMP manager or the unit.
warmStart Is reinitializing itself so that neither the configuration of the SNMP
(RFC-1215 trap-type 1) manager nor that of the unit will change.
linkDown Recognizes a failure in one of the communication links represented
(RFC-1215 trap-type 2) in the SNMP manager’s configuration.
linkUp Recognizes that one of the communication links represented in the
(RFC-1215 trap-type 3) SNMP manager's configuration has come up.
frDLCIStatusChange Recognizes that one of the virtual circuits has changed states. The
(RFC-1315 trap-type 1) link has been created, invalidated, or toggled between the active
and inactive states.
eventTableOverwrite Detected that a new event has overwritten an unread event. Once
(Lucent trap-type 16) sent, additional overwrites will not cause another trap to be sent
until at least one table’s worth of new events has occurred.

Stinger Reference Guide 2-13

Stinger Profile and Parameter Reference
Alarm-LED-Major

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the Stinger sends alarm-event traps to the host at Host-Address.
• No specifies that the Stinger does not send alarm-event traps.

Example: set alarm-enabled=yes

Location: Trap host-name

Usage: Specify On, Off, or Blink. Off is the default.

Example: set alarm-led-major=on

Location: Alarm name > Action

Usage: Specify On, Off, or Blink. Off is the default.

Example: set alarm-led-minor=on

Location: Alarm name > Action

Usage: Specify On or Off. Off is the default.

Example: set alarm-relay-major=on

Location: Alarm name > Action

2-14 Stinger Reference Guide

Stinger Profile and Parameter Reference
Alarm-Relay-Major-Duration

Alarm-Relay-Major-Duration
Description: Specifies the number of seconds that the Stinger leaves Alarm-Relay-Major in
the position specified in the Alarm-Relay-Major action.

Usage: Specify an integer. The default is 0 (zero), which directs the Stinger to leave the alarm
set indefinitely.

Example: set alarm-relay-major-duration=30

Location: Alarm name > Action

Usage: Specify On or Off. Off is the default.

Example: set alarm-relay-minor=on

Location: Alarm name > Action

Example: set alarm-relay-minor-duration=30

Location: Alarm name > Action

Stinger Reference Guide 2-15

Stinger Profile and Parameter Reference
AL-DMT-Stat

admin> list
[in AL-DMT/{ shelf-1 slot-4 1 }]
name=1:4:1
physical-address*={ shelf-1 slot-4 1 }
enabled=yes
line-config={ 0 301 static { any-shelf any-slot 0 } +
fast-path-config={ 10 50 1000 8000 200 1000 }
interleave-path-config={ 0 0 0 0 0 0 16 16 }
margin-config={ 6 6 0 0 31 31 0 0 0 0 0 0 0 0 }

You can then use the Set command to modify the settings in the profile. To close the profile
and save your changes:
admin> write
AL-DMT/{ shelf-1 slot-4 1 } written

Usage: Specify Yes or No. The default is Yes.

Example: set allow-auth-config-rqsts=no

Location: External-Auth > Rad-Auth-Client

2-16 Stinger Reference Guide

Stinger Profile and Parameter Reference
Allow-Code

Allow-Code
Description: Enables or disables permission to upload code to the Stinger and use the
following code-level commands:
• Format (to prepare a flash card for use)
• Fsck (to check file system on a flash card)

Usage: Specify Yes or No. The default is No.

• Yes grants permission to upload code to the Stinger.
• No denies permission to upload code to the Stinger.
Example: set allow-code=yes
Location: User name

Usage: Specify Yes or No. The default is No.

• Yes grants permission to use diagnostic commands.
• No denies permission to use diagnostic commands.

Example: set allow-diagnostic=yes

Location: User name

Stinger Reference Guide 2-17

Stinger Profile and Parameter Reference
Allow-Guaranteed-Up-Stream-Bandwidth

Allow-Guaranteed-Up-Stream-Bandwidth
Description: Specifies the guaranteed upstream bandwidth for the slot.

Usage: Specify an integer. The default is 44000 Kbps for each LIM, which distributes the sum
of 622 Mbps across the 14 LIM slots.

Example: set config 4 allow-guaranteed-up-stream-bandwidth=80000

Dependencies: Even when the system is heavily loaded or the network is congested, the slot
should be able to send upstream traffic to the specified Allow-Guaranteed-Up-Stream-
Bandwidth value. The total of all guaranteed upstream bandwidth for all slots cannot exceed
the maximum upstream capacity of the system. Typically, slots with a high requirement for
realtime traffic need high guaranteed bandwidth.

Location: ATM-Config > Bandwidth-Config > Bandwidth-Config N

Example: set config 4 allow-max-up-stream-bandwidth=80000

Dependencies: Note that 155 Mbit throughput on a LIM is not guaranteed traffic. If a LIM
ships traffic up to that limit, the system makes a best-effort attempt to deliver it.

Location: ATM-Config > Bandwidth-Config > Bandwidth-Config N

Usage: Specify Yes or No. The default is No.

• Yes grants permission to view passwords.
• No denies permission to view passwords.

Example: set allow-password=yes

Location: User name

2-18 Stinger Reference Guide

Stinger Profile and Parameter Reference
Allow-System

Allow-System
Description: Enables or disables permission to use the following system commands:

Command Description
ARPtable Display or modify the Stinger ARP table.
Clr-History Clear the fatal-error history log.
Connection Display the connection-status window.
Dir List profiles and profile types.
Dircode Show the contents of the PCMCIA card code.
Fatal-History List the fatal-error history log.
Get Display settings in a profile.
IProute Add or delete IP routes.
Line Display the line-status window.
List List settings in the working profile.
Log Display and control the event-log window.
Netstat Display the routing or interface tables.
New Create a new profile.
Read Make the specified profile the working profile.
Refresh Refresh the remote configuration.
Set Specify a value.
Show Show shelves, slots, or items.
Status Display the system status or hide the status window.
Userstat Display user session status.
Version Display software-version information.
View Change the contents of a status window.

Usage: Specify Yes or No. The default is No.

• Yes grants permission to use system commands.
• No denies permission to use system commands.

Example: set allow-system=yes

Location: User name

Stinger Reference Guide 2-19

Stinger Profile and Parameter Reference
Allow-Termserv

Allow-Termserv
Description: Enables or disables permission to use the terminal server and its commands.

Usage: Specify Yes or No. The default is No.

• Yes grants permission to use the terminal server and its commands.
• No denies permission to use the terminal server and its commands.

Example: set allow-termserv=yes

Location: User name

Usage: Specify Yes or No. The default is No.

• Yes grants permission to use update commands.
• No denies permission to use update commands.

Example: set allow-update=yes

Location: User name

2-20 Stinger Reference Guide

Stinger Profile and Parameter Reference
Analog-Encoding

Analog-Encoding
Description: Specifies the encoding standard for digitized analog data. The Stinger uses the
value you specify for all codecs on the Stinger.

Usage: Specify one of the following values:

• U-Law specifies U-Law encoding.
• A-Law specifies A-Law encoding.

Example: set analog-encoding=u-law

Location: System

Answer-Defaults
Description: A profile containing system defaults for incoming calls. The Stinger uses the
values in this profile until a caller passes authentication and the Stinger retrieves a copy of the
caller's profile. In addition, you can use the Answer-Defaults profile to supply defaults for
profiles retrieved from remote authentication servers.

Usage: Use the Read and List commands to make Answer-Defaults the working profile and
list its contents. For example:
admin> read answer-defaults
ANSWER-DEFAULTS read
admin> list
[in ANSWER-DEFAULTS]
use-answer-for-all-defaults = yes
force-56kbps=no
profiles-required=yes
ip-answer={ yes yes no 1 }
session-info={ "" "" no 120 no-idle 120 0 }

You can then use the Set command to modify the settings in the profile. To close the profile
and save your changes:
admin> write
ANSWER-DEFAULTS written

Stinger Reference Guide 2-21

Stinger Profile and Parameter Reference
Answer-Originate

Answer-Originate
Description: Specifies whether the Connection profile enables incoming calls, outgoing calls,
or both.

Usage: Specify one of the following values:

• Ans-And-Orig (the default) specifies that the Stinger can both initiate and receive calls
over the connection defined in the profile.
• Orig-Only specifies that the profile can be used only for outgoing calls. The Stinger will
not answer calls from the profile.
• Ans-Only specifies that the profile can be used only for incoming calls. The Stinger will
not initiate calls from the profile.

Example: set answer-originate=ans-and-orig

Dependencies: Answer-Originate does not apply to nailed-up call types.

Location: Connection station > Telco-Options

Usage: The ANSI-ADSL-Ver value is read only.

Example: ansi-adsl-ver=2

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Status

Usage: Specify one of the following values:

• Input (the default) specifies that bits are set in packets received on the interface.
• Output specifies that bits are set in outgoing packets only.
• Both specifies that both incoming and outgoing packets are tagged.

Example: set apply-to=both

Dependencies: You must set Active=Yes in the TOS-Options subprofile for the Apply-To
setting to apply.

Location: Connection station > IP-Options > TOS-Options

2-22 Stinger Reference Guide

Stinger Profile and Parameter Reference
Ascend-Enabled

Ascend-Enabled
Description: Specifies whether a trap is generated to indicate a change of state in a host
interface. All port connections are monitored in a state machine and reported by means of this
trap.

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that a trap is generated to indicate a change of state in a host interface.
• No specifies that a trap is not generated to indicate a change of state in a host interface.

Example: set ascend-enabled=no

Dependencies: If you set Ascend-Enabled=Yes, you must also set Port-Enabled=Yes.

Location: Trap host-name

Usage: Specify one of the following values:

• AAL5-LLC (the default) specifies that the protocols are identified by prefixing the
Protocol Data Unit (PDU) with an IEEE 802.2 Logical Link Control (LLC) header.
• AAL5-VC specifies that the system performs higher-layer protocol multiplexing by
creating separate ATM Virtual Circuits (VC multiplexing).

Location: Connection > ATM-Options, Connection > ATM-Connect-Options

Stinger Reference Guide 2-23

Stinger Profile and Parameter Reference
ATM-Connect-Options

To close the profile and save your changes:

admin> write
ATM-CONFIG written

2-24 Stinger Reference Guide

Stinger Profile and Parameter Reference
ATM-Options

ATM-Options
Description: A subprofile containing options for configuring an Asynchronous Transfer
Mode (ATM) terminating connection or the first (incoming) leg of an ATM circuit.
Usage: With a Connection profile as the working profile, list the ATM-Options subprofile.
For example:
admin> list atm-options
[in CONNECTION:atm-options]
atm1483type=aal5-llc
vpi=0
vci=32
atm-enabled=yes
nailed-group=0
vp-switching=no
qos-contract=""

You can then use the Set command to modify the settings in the subprofile. To close the
subprofile and return to a higher context in the working profile:
admin> list ..

Location: Connection

Stinger Reference Guide 2-25

Stinger Profile and Parameter Reference
ATM-QoS

ATM-QoS
Description: A profile that enables you to configure Quality of Service (QoS) values for an
Asynchronous Transfer Mode (ATM) link.
Usage: Use the Read and List commands to create a new ATM-QoS profile and list its
contents. For example:
admin> read atm-qos unit1
ATM-QOS/unit1 read
admin> list
[in ATM-QOS/unit1]
contract-name*=unit1
qos-class=cbr
aal-type=aal-5
early-packet-discard=yes
partial-packet-discard=yes

You can then use the Set command to modify the settings in the profile. To close the profile
and save your changes:
admin> write
ATM-QOS/unit1 written

2-26 Stinger Reference Guide

Stinger Profile and Parameter Reference
ATMVCC-Stat

ATMVCC-Stat
Description: A profile that provides read-only information about the state of Virtual Channel
Connections (VCCs) on an Asynchronous Transfer Mode (ATM) link.

Usage: Use the Read and List commands to make ATMVCC-Stat the working profile and list
its contents. For example:
admin> read atmvcc {shelf-1 trunk-module-2 2 0 103}
ATMVCC-STAT/{ shelf-1 trunk-module-2 2 0 103 } read
admin> list
[in ATMVCC-STAT/{ shelf-1 trunk-module-2 2 0 103 }]
vcc-ident*={ shelf-1 trunk-module-2 2 0 103 }
circuit-name=unit1
current-state=vcc-data-transfer
vcc-type=connecting
magic-key=16777312

To close the profile and save your changes:

admin> write
ATMVCC-Stat/{ shelf-1 trunk-module-2 2 0 103 } written

Usage: The Attenuation-Up value is read only.

Example: attenuation-up=41

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Statistic

Stinger Reference Guide 2-27

Stinger Profile and Parameter Reference
Authentication-Enabled

Authentication-Enabled
Description: Specifies whether the system generates a trap when an authentication failure
occurs.

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the system generates a trap when an authentication failure occurs.
• No specifies that the system does not generate a trap when an authentication failure
occurs.

Example: set authentication-enabled=no

Location: Trap host-name

Usage: Specify Yes or No. The default is No.

• Yes enables the Stinger to send a second RADIUS Accounting Start record when the
RADIUS Framed-Address value is assigned.
• No prevents the Stinger from sending a second RADIUS Accounting Start record.

Example: set auth-frm-adr-start=yes

Location: External-Auth > Rad-Auth-Client

Usage: Specify Yes or No. The default is No.

• Yes specifies that the Stinger returns User Busy (decimal 17) when CLID or
called-number authentication fails.
• No specifies that the Stinger returns Normal Call Clearing (decimal 16) when CLID or
called-number authentication fails.

Example: set auth-id-fail-return-busy=yes

Location: External-Auth > Rad-Auth-Client

2-28 Stinger Reference Guide

Stinger Profile and Parameter Reference
Auth-ID-Timeout-Return-Busy

Auth-ID-Timeout-Return-Busy
Description: Specifies whether the Stinger returns User Busy (decimal 17) or Normal Call
Clearing (decimal 16) as the Cause Element in ISDN Disconnect packets when CLID or
called-number authentication times out.

Usage: Specify Yes or No. The default is No.

• Yes specifies that the Stinger returns User Busy (decimal 17) when CLID or
called-number authentication times out.
• No specifies that the Stinger returns Normal Call Clearing (decimal 16) when CLID or
called-number authentication times out.

Example: set auth-id-timeout-return-busy=yes

Location: External-Auth > Rad-Auth-Client

Usage: Specify one of the following settings:

• Change-Name (the default) indicates that the name provided by the server is used for the
status display and for RADIUS accounting purposes.
• Keep-Name specifies that the Stinger does not use the User-Name returned by the server.
If a name has been specified (that is, if CLID or DNIS authentication is not used), the
system uses that name. Otherwise, it uses the name sent to the server for authentication.
• Keep-Realm-Name specifies that if the user name sent to the server for authentication is in
a realm (for example, if it contains one of the characters @\/%), the system behaves as if
Auth-Keep-User-Name were set to Keep-Name. Otherwise, the system behaves as if
Change-Name were specified.

Example: set auth-keep-user-name=keep-name

Dependencies: A user authenticated by CLID or DNIS will appear to have the CLID or DNIS
number as his or her user name. If this condition is a problem, set Auth-Keep-User-Name to
Keep-Realm-Name.

Location: External-Auth > Rad-Auth-Client

Stinger Reference Guide 2-29

Stinger Profile and Parameter Reference
Auth-Key

Auth-Key
Description: Specifies an authentication key that appears in external authentication
configurations.

Usage: Specify a string of up to 22 characters. The default is null. For security purposes, the
string is hidden when Auth-Key is displayed. If you specify a null value, the system logs the
following warning:
warning: auth-key is empty (bad for security)

Example: set auth-key=mypw

Location: External-Auth > Rad-Auth-Client

Example: set auth-port=1565

Location: External-Auth > Rad-Auth-Client

Usage: Specify one of the following settings:

Example: set auth-radius-compat=vendor-specific

Location: External-Auth > Rad-Auth-Client

2-30 Stinger Reference Guide

Stinger Profile and Parameter Reference
Auth-Realm-Delimiters

Auth-Realm-Delimiters
Description: Specifies the characters that delimit a realm from the user name.

Usage: Specify up to seven characters in any order. The default is @\/%. If you do not specify
any characters, the system behaves as though Auth-Keep-User-Name=Change-Name.

Example: set auth-realm-delimiters="%"

Dependencies: The Auth-Realm-Delimiters setting does not apply unless

Auth-Keep-User-Name=Keep-Realm-Name.

Location: External-Auth > Rad-Auth-Client

Example: set auth-reset-time=60

Dependencies: For Auth-Reset-Time to apply, you must specify at least one value for
Auth-Server-N.

Location: External-Auth > Rad-Auth-Client

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the Stinger drops calls that have passed CLID authentication.
• No specifies that the Stinger allows CLID-authenticated connections even if there is no
response form the external server.

Example: set auth-rsp-required=yes

Dependencies: For Auth-Rsp-Required to apply, CLID authentication must be in use, and

CLID-Auth-Mode must be set to Required.

Location: External-Auth > Rad-Auth-Client

Stinger Reference Guide 2-31

Stinger Profile and Parameter Reference
Auth-Server-N (N=1–3)

Auth-Server-N (N=1–3)
Description: Specifies the IP address of an external authentication server. The Stinger first
tries to connect to server #1. If it receives no response, it tries to connect to server #2. If it still
receives no response, it tries server #3. If the Stinger connects to a server other than server #1,
it continues to use that server until it fails to service requests, even if the first server has come
back online.

Usage: Specify an IP address in dotted decimal notation, separating the optional subnet mask
value from the address with a forward slash character. The addresses must all point to servers
of the same type, as specified by the Auth-Type setting. The default is 0.0.0.0, which indicates
that no authentication server exists.

Example: set auth-server-1=10.2.3.4/24

Location: External-Auth > Rad-Auth-Client

Example: set auth-sess-interval=15

Dependencies: Auth-Sess-Interval applies only if Auth-Type=RADIUS or RADIUS/Logout.

Location: External-Auth > Rad-Auth-Client

2-32 Stinger Reference Guide

Stinger Profile and Parameter Reference
Auth-TS-Secure

Auth-TS-Secure
Description: Acts as a flag to prevent access to the terminal-server interface when the
RADIUS Login-Host value is not specified.

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the terminal-server must be secure. If the Login-Host is not specified,
the Stinger drops the call.
• No specifies that if the Login-Host is not specified, the Stinger allows the dial-in
connection to access the terminal-server interface.

Example: set auth-ts-secure=yes

Location: External-Auth > Rad-Auth-Client

Usage: Specify an integer from 1 to 10. The default is 1.

Example: set auth-timeout=5

Dependencies: If Auth-Type=None, Auth-Timeout does not apply.

Location: External-Auth > Rad-Auth-Client

Usage: Specify one of the following values:

• None (the default) disables the use of an authentication server.
• RADIUS specifies that the Stinger accesses a RADIUS server. In a RADIUS query, the
Stinger provides a user ID and password to the server. If the validation succeeds, the
server sends back a complete profile. The profile specifies routing, destination-specific
static routes, and usage restrictions for the user. RADIUS supports PAP and CHAP, and
terminal-server validation.
• RADIUS/Logout is identical to RADIUS, except that when you select RADIUS/Logout,
the Stinger sends a request to the RADIUS server to initiate logout when the session ends.

Example: set auth-type=radius

Stinger Reference Guide 2-33

Stinger Profile and Parameter Reference
Auto-Logout

Dependencies: If Auth-Type is set to a value other than None, you must specify at least one
authentication server address.

Location: External-Auth

Usage: Specify Yes or No. The default is No.

• Yes specifies that the Stinger automatically logs out the current User profile if DTR is lost
on the serial port.
• No specifies that the current User profile remains logged in.

Example: set auto-logout=yes

Location: Serial {shelf-N slot-N N}

Usage: Specify Yes or No. The default is No.

• Yes specifies that a user can omit the keyword Telnet and specify a hostname in order
to initiate a Telnet session.
• No specifies that if a user types only a hostname at the terminal-server prompt, the Stinger
rejects it as an unknown command.

Example: set auto-telnet=yes

Dependencies: When terminal services are disabled, Auto-Telnet does not apply.

Location: Terminal-Server > Terminal-Mode-Configuration > Telnet-Options

2-34 Stinger Reference Guide

Stinger Profile and Parameter Reference
Auxiliary-Syslog

Auxiliary-Syslog
Description: A subprofile containing Syslog values for each data stream.

Usage: With Log as the working profile, use the List command to display the
Auxiliary-Syslog subprofile. For example:
admin> list auxiliary-syslog
[in LOG:auxiliary-syslog]
auxiliary-syslog[1]={ no debug 10.40.40.41 514 local0 }
auxiliary-syslog[2]={ no emergency 10.40.40.42 514 local0}

To close the Auxiliary-Syslog subprofile and return to a higher context in the profile:
admin> list ..

Location: Log

Location: Log > Auxiliary-Syslog

Stinger Reference Guide 2-35

Stinger Profile and Parameter Reference
B

B
Backup
Description: Specifies the name of a backup Connection profile for a nailed-up connection.
The profile serves as a backup if the remote device goes out of service. It is not intended to
provide alternative lines for getting to a single destination.

When the system detects that the primary interface is unavailable, it puts the primary interface
in a Backup Active state. It does not remove the routes to the primary interface. It then diverts
traffic from the primary to the backup interface. When the system detects that the primary
interface is available again, it diverts traffic back to the primary interface. If the backup
interface is a switched connection, the Stinger then brings it down.

Usage: Specify the name of a Connection profile. You can enter up to 32 characters. The
default is null.

Example: set backup=newyork

Dependencies: Consider the following:

• One of the side effects of the datalink-layer backup interface is that, when a nailed-up
interface specifies a backup interface, the routes to the nailed-up interface never go down.
• Nested backups are not supported. (The profile for a backup interface cannot specify
another backup interface.)
• The profile for a backup interface does not inherit attributes from the profile for the
primary nailed-up connection.

Location: Connection station > Session-Options

Location: ATM-Config > Bandwidth-Config

2-36 Stinger Reference Guide

Stinger Profile and Parameter Reference
Bandwidth-Stats

Bandwidth-Stats
Description: A profile that provides information about bandwidth allocation for Line
Interface Modules (LIMs).

Usage: Use the Read and List commands to make Bandwidth-Stats the working profile and
list its contents. For example:
admin> read bandwidth-stats
BANDWIDTH-STATS read
admin> list
[in BANDWIDTH-STATS]
max-upstream-bandwidth=622160
active-upstream-bandwidth-on-trunks=155540
standby-upstream-bandwidth-on-trunks=466620

To close the profile and save your changes:

admin> write
BANDWIDTH-STATS written

Example: set banner="Welcome"

Dependencies: If terminal services are disabled, Banner does not apply.

Location: Terminal-Server > Terminal-Mode-Configuration

Usage: This setting is read only.

Example: banner [1]="Welcome to the Terminal Server"

Location: Ext-Tsrv

Stinger Reference Guide 2-37

Stinger Profile and Parameter Reference
Base

Base
Description: A read-only profile that displays the software version, enabled features, network
interfaces, and other system information.

Usage: Use the Get command to display the Base profile values. For example:
admin> get base
[in BASE]
software-version=1
software-revision=0
software-level=E
d-channel-enabled=yes
aim-enabled=yes
switched-enabled=yes
multi-rate-enabled=yes
maxlink-client-enabled=enabled
data-call-enabled=yes
r2-signaling-enabled=no
serial-number=6201734
countries-enabled=511
network-management-enabled=no
advanced-agent-enabled=no
phs-support=no
selectools-enabled=no
hardware-level=0
voip-enabled=no

Note: During a BERT, normal data transmission is interrupted.

Usage: Specify Yes or No. The default is No.

• Yes enables the BERT.
• No disables the BERT.

Example: set bert-enable=yes

Dependencies: Consider the following:

• The BERT-Enable setting is not saved to the unit’s permanent memory. If you reset the
card or the unit, the setting reverts to its default.
• The BERT-Timer setting determines the duration of the BERT.

2-38 Stinger Reference Guide

Stinger Profile and Parameter Reference
BERT-Error-Counter

Location: SDSL-Stat {shelf-N slot-N N} > Physical-Statistic

Usage: BERT-Error-Counter is read only.

Dependencies: You must set BERT-Enable=Yes for BERT-Error-Counter to apply.

Location: SDSL-Stat {shelf-N slot-N N} > Physical-Statistic

Stinger Reference Guide 2-39

Stinger Profile and Parameter Reference
BERT-Timer

BERT-Timer
Description: Specifies the duration of the Bit-Error Rate Test (BERT).

Usage: Specify one of the following values:

• 1 minute
• 2 minutes (the default)
• 3 minutes
• 4 minutes
• 5 minutes
• 10 minutes
• 15 minutes
• 20 minutes
• 30 minutes

Example: set bert-timer=1 minute

Dependencies: Consider the following:

• If the two ends or the connection are not connected, the BERT-Timer does not apply. In
this case, you must set BERT-Enabled to No to end the BERT.
• The BERT-Timer setting is not saved to the unit’s permanent memory. If you reset the
card or the unit, the setting reverts to its default.

Location: SDSL-Stat {shelf-N slot-N N} > Physical-Statistic

Example: set billing-number=510-555-1972

Dependencies: Consider the following:

• The Stinger uses the value that you specify as a billing suffix or as the calling party
number.
• If you specify a value for Billing-Number, there is no guarantee that the phone company
will send it to the answering device.

Location: Connection station > Telco-Options

2-40 Stinger Reference Guide

Stinger Profile and Parameter Reference
BOOTP-Enabled

BOOTP-Enabled
Description: Specifies whether the Stinger uses BOOTP to get settings and check for a new
software load.

Usage: Specify Yes or No. The default is No.

• Yes enables the Stinger to use BOOTP.
• No disables the use of BOOTP.

Example: set bootp-enabled=yes

Location: IP-Global

Example: set 1=12.34.56.78

Location: IP-Global > BOOTP-Relay

Stinger Reference Guide 2-41

Stinger Profile and Parameter Reference
Boot-SR-Version

Boot-SR-Version
Description: Displays the version of the current boot-loader.

Usage: The Boot-SR-Version value is read only. The boot-loader updates the value of this
setting with its version at every system reset.

Example: boot-sr-version=2.1

Location: System

Usage: Specify one of the following values:

• General-Info causes the Stinger to display general information and statistics for the
system.
• Log-Window (the default) causes the Stinger to display saved system-event log entries.
• Line-Status causes the Stinger to display the status of the system telephony interfaces.

Example: set bottom-status=general-info

Location: User name

Usage: The BPV-Error-Count value is read only.

Example: bpv-error-count=0

Location: DS3-ATM-Stat {shelf-N slot-N N}

2-42 Stinger Reference Guide

Stinger Profile and Parameter Reference
Buffer-Chars

Buffer-Chars
Description: Specifies whether the Stinger buffers input characters in a terminal-server
session, or processes each character as you enter it.

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the Stinger buffers input characters for 100 ms.
• No specifies that the Stinger processes each input character as you enter it.

Example: set buffer-chars=yes

Dependencies: If terminal services are disabled, Buffer-Chars does not apply.

Location: Terminal-Server > Terminal-Mode-Configuration

Stinger Reference Guide 2-43

Stinger Profile and Parameter Reference
C

C
Call-By-Call
Description: Specifies the Call-By-Call signaling value.

Usage: Specify a number from 0 to 65535, corresponding to the type of Call-By-Call service
in use. The default is 0 (zero), which disables Call-By-Call service.

The following Call-By-Call services are available if the service provider is AT&T:
• 0—Disable Call-By-Call service
• 1—SDN, including GSDN
• 2—Megacom 800
• 3—Megacom
• 6—ACCUNET Switched Digital Services
• 7—Long Distance Service, including AT&T World Connect
• 8—International 800–I800
• 16—AT&T MultiQuest

The following VPN and GVPN Call-By-Call services are available if the service provider is
Sprint:
• 0—Reserved
• 1—Private
• 2—Inwatts
• 3—Outwatts
• 4—FX
• 5—Tie Trunk

The following Call-By-Call services are available if the service provider is MCI:
• 1—VNET/Vision
• 2—800
• 3—PRISM1, PRISM II, WATS
• 4—900
• 5—DAL

Example: set call-by-call=7

Location: Connection station > Telco-Options

2-44 Stinger Reference Guide

Stinger Profile and Parameter Reference
Called-Number-Type

Called-Number-Type
Description: Specifies the type of phone number entered in the Connection profile. When the
Stinger dials an outgoing call, the carrier uses the value of Called-Number-Type in a
Connection profile to interpret the dialed phone number.

Usage: Specify one of the following values:

• Unknown specifies that the phone number is of an unknown type.
• International specifies phone numbers outside the U.S.
• National (the default) specifies phone numbers within the U.S.
• Local specifies phone numbers within your Centrex group.
• Abbrev specifies add-on numbers only.
• Network-Specific specifies that the dialed network interprets the phone number. This
setting uses TypeOfNumber=3 in the called party’s Information Element.

Example: set called-number-type=international

Dependencies: Called-Number-Type does not apply to nailed-up connections.

Location: Connection station

Usage: Specify the called number. The default is null.

Example: set callednumber=5551212

Location: Connection station

Call-Info
Description: Specifies whether, at the time an authenticated call ends, the Stinger reports to
Syslog the following information about the call:
• Station name
• Calling phone number
• Called phone number
• Encapsulation protocol
• Data rate (in bits per second)
• Progress code or disconnect reason
• Number of seconds before authentication
• Number of bytes or packets received during authentication
• Number of bytes or packets sent during authentication

Stinger Reference Guide 2-45

Stinger Profile and Parameter Reference
Call-Log-Enable

• Length of session (in seconds)

• Number of bytes or packets received during the session
• Number of bytes or packets sent during the session

A one-line Syslog message contains information about the terminated call. The information
also appears in the connection status window, and is logged as a message at level INFO. For
example:
"Conn=("cjones-p50" 5106785291->? MP 56000 60/185) \
Auth=(3 347/12 332/13) \
Sess=(1 643/18 644/19), Terminated"

If some of the information is not available, that field is displayed as either a question-mark (for
strings) or a zero (for numerals).

Usage: To specify that the Stinger reports the information to Syslog, specify End-Of-Call. To
specify that the Stinger does not report the information, specify None (the default).

Dependencies: Use Call-Info only for diagnosing session problems. The reports to Syslog
rely on the UDP protocol, which does not guarantee delivery. Therefore, you should not use
Call-Info for billing purposes.

Location: Log

Usage: Specify Yes or No. No is the default.

• Yes enables call logging.
• No disables call logging.

Example: set call-log-enable=yes

Dependencies: If you set Call-Log-Enable=Yes, you must specify the IP address of at least
one call-log host for the Call-Log-Host-N setting.

Location: Call-Logging

2-46 Stinger Reference Guide

Stinger Profile and Parameter Reference
Call-Log-Host-N

Once you have configured call logging, the Stinger sends Start Session, Stop Session, and
Failure-to-Start Session packets to a call-log host. A call-log host is a local host that supports
the RADIUS accounting protocol and is configured properly to communicate with the Stinger
(for example, a RADIUS accounting server or a host running NavisAccess). The call-log
information is sent independently of RADIUS accounting records. If both call logging and
RADIUS accounting are in use, the information is sent in parallel.

Usage: Use the Read and List commands to make Call-Logging the working profile and list
its contents. For example:
admin> read call-logging
CALL-LOGGING read
admin> list
[in CALL-LOGGING]
call-log-enable=no
call-log-host-1=0.0.0.0
call-log-host-2=0.0.0.0
call-log-host-3=0.0.0.0
call-log-port=0
call-log-key=""
call-log-timeout=0
call-log-id-base=acct-base-10
call-log-reset-time=0
call-log-stop-only=yes
call-log-limit-retry=0

You can then use the Set command to modify the settings in the profile. To close the profile
and save your changes:
admin> write
CALL-LOGGING written

See Also: Call-Log-Enable, Call-Log-Host-N, Call-Log-ID-Base, Call-Log-Key,

Call-Log-Limit-Retry, Call-Log-Port, Call-Log-Reset-Time, Call-Log-Stop-Only,
Call-Log-Timeout

Call-Log-Host-N
Description: Specifies the IP address of a call-log host.

The Stinger first tries to connect to host #1. If it receives no response, it tries to connect to host
#2. If it still receives no response, it tries host #3. If the Stinger connects to a host other than
host #1, it continues to use that host until it fails to service requests, even if the first host has
come back online.

Usage: Specify an IP address in dotted decimal notation. The default is 0.0.0.0.

Example: set call-log-host-1=10.1.2.3

Dependencies: If Call-Log-Enable=No, Call-Log-Host-N does not apply.

Location: Call-Logging

Stinger Reference Guide 2-47

Stinger Profile and Parameter Reference
Call-Log-ID-Base

Call-Log-ID-Base
Description: Specifies whether the Stinger presents a session ID to the call-log host in base
10 or base 16.

Usage: Specify one of the following values:

• Acct-Base-10 (the default) specifies a decimal base.
• Acct-Base-16 specifies a hexadecimal base.

Example: set call-log-id-base=acct-base-16

Dependencies: Consider the following:

• If Call-Log-Enable=No, Call-Log-ID-Base does not apply.
• Changing the value of Call-Log-ID-Base while call-logging sessions are active results in
inconsistent reporting between the Start and Stop records.

Location: Call-Logging

Example: set call-log-key=mypw

Dependencies: If Call-Log-Enable=No, Call-Log-Key does not apply.

Location: Call-Logging

Example: set call-log-limit-retry=10

2-48 Stinger Reference Guide

Stinger Profile and Parameter Reference
Call-Log-Port

Dependencies: The Stinger always makes at least one attempt. For example, if you set the
number of retries to 10, the Stinger makes 11 attempts: the original attempt plus 10 retries.

Location: Call-Logging

See Also: Call-Log-Enable, Call-Log-Host-N, Call-Log-ID-Base, Call-Log-Key,

Call-Log-Port, Call-Log-Reset-Time, Call-Log-Stop-Only, Call-Log-Timeout

Call-Log-Port
Description: Specifies the UDP destination port to use for call-logging requests.

Usage: Specify a UDP port number from 1 to 32767. The value must match the port number
configured on the call-log host. The default of 0 (zero) indicates any UDP port.

Example: set call-log-port=1500

Dependencies: If Call-Log-Enable=No, Call-Log-Port does not apply.

Location: Call-Logging

See Also: Call-Log-Enable, Call-Log-Host-N, Call-Log-ID-Base, Call-Log-Key,

Call-Log-Limit-Retry, Call-Log-Reset-Time, Call-Log-Stop-Only, Call-Log-Timeout

Call-Log-RADIUS-Compat
Description: Enables or disables Vendor-Specific Attribute (VSA) compatibility mode when
the Stinger is using RADIUS for call-logging to NavisAccess.

Usage: Specify one of the following settings:

Example: set call-log-radius-compat=vendor-specific

Location: Call-Logging

Stinger Reference Guide 2-49

Stinger Profile and Parameter Reference
Call-Log-Reset-Time

Call-Log-Reset-Time
Description: Specifies the number of seconds that must elapse before the Stinger returns to
using the primary call-log host (Call-Log-Host-1).

Usage: Specify the number of seconds. The default is 0 (zero), which specifies that the Stinger
does not return to using the primary call-log host.

Example: set call-log-reset-time=60

Dependencies: For Call-Log-Reset-Time to apply, you must set Call-Log-Enable=Yes and

specify at least one value for Call-Log-Host-N.

Location: Call-Logging

See Also: Call-Log-Enable, Call-Log-Host-N, Call-Log-ID-Base, Call-Log-Key,

Call-Log-Limit-Retry, Call-Log-Port, Call-Log-Stop-Only, Call-Log-Timeout

Call-Log-Stop-Only
Description: Specifies whether the Stinger should send a Stop packet that does not contain a
user name. (At times, the Stinger can send a Stop packet to the call-log host without having
sent a Start packet. Such a Stop packet has no user name.)

Usage: Specify Yes or No. Yes is the default.

• Yes specifies that the Stinger should send a Stop packet even if it does not contain a user
name.
• No specifies that the Stinger should not send a Stop packet that does not contain a user
name.

Example: set call-log-stop-only=no

Location: Call-Logging

See Also: Call-Log-Enable, Call-Log-Host-N, Call-Log-ID-Base, Call-Log-Key,

Call-Log-Limit-Retry, Call-Log-Port, Call-Log-Reset-Time, Call-Log-Timeout

Call-Log-Timeout
Description: Specifies the amount of time (in seconds) that the Stinger waits for a response to
a call-logging request. If it does not receive a response within the specified time, the Stinger
sends the request to the next host specified by Call-Log-Host-N. If all call-logging hosts are
busy, the Stinger stores the request and tries again at a later time. It can queue up to 154
requests.

Usage: Specify an integer from 1 to 10. The default is 0 (zero), which disables the timer.

Example: set call-log-timeout=5

Dependencies: If Call-Log-Enable=No, Call-Log-Timeout does not apply.

Location: Call-Logging

2-50 Stinger Reference Guide

Stinger Profile and Parameter Reference
Circuit-Name

See Also: Call-Log-Enable, Call-Log-Host-N, Call-Log-ID-Base, Call-Log-Key,

Call-Log-Limit-Retry, Call-Log-Port, Call-Log-Reset-Time, Call-Log-Stop-Only

Circuit-Name
Description: In an ATMPVC-Stat profile, specifies the name of the Permanent Virtual
Circuit (PVC). In an ATMVCC-Stat, specifies the name of the Virtual Channel Connection
(VCC).

Usage: In an ATMPVC-Stat or ATMVCC-Stat profile, the Circuit-Name value is read only.

Location: ATMPVC-Stat circuit-name, ATMVCC-Stat circuit-name

Usage: Specify Yes or No. The default is No.

• Yes specifies that the Stinger clears a dial-in connection when an interactive Telnet,
Rlogin, or TCP session terminates.
• No specifies that the Stinger does not clear a dial-in connection when an interactive
session terminates. Instead, the Stinger returns the user to the terminal-server menu.

Example: set clear-call=yes

Dependencies: If terminal services are disabled, Clear-Call does not apply.

Location: Terminal-Server > Terminal-Mode-Configuration

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the Stinger clears the screen of all status messages and echoed scripts
when it establishes a terminal-server session.
• No specifies that the Stinger establishes the terminal-server session without clearing the
screen.

Example: set clear-screen=yes

Dependencies: If terminal services are disabled, Clear-Screen does not apply.

Location: Terminal-Server > Terminal-Mode-Configuration

Stinger Reference Guide 2-51

Stinger Profile and Parameter Reference
CLID

CLID
Description: Specifies the phone number of the remote station (the calling line ID). If the
CLID is present for an incoming call, the Stinger can use the CLID value for CLID
authentication before answering the call.

Usage: Specify the calling party’s phone number. You can enter up to 24 characters. The
default is null.

Example: set clid=510-555-1213

Location: Connection station

Client-Default-Gateway
Description: Specifies the default gateway to use for traffic from this connection if no
specific route appears in the IP routing table.

Usage: Specify an IP address in dotted decimal notation. The default is 0.0.0.0, which causes
the system to use the Default route.

Example: set client-default-gateway=10.207.23.13

Location: Connection station > IP-Options

Usage: Specify one of the following values:

• High-Priority specifies the highest priority. The Stinger chooses an interface with this
priority setting as the clock source over other interfaces with a lower priority. If more than
one interface has the highest priority, the first available interface becomes the clock
source.
• Middle-Priority specifies the second priority. The Stinger chooses an interface with this
priority setting if every interface with a High-Priority setting is unavailable. If more than
one interface has a Middle-Priority setting, the first available Middle-Priority interface
becomes the clock source.
• Low-Priority specifies the lowest priority. The Stinger chooses an interface with this
priority only if every interface with a higher priority setting is unavailable. If more than
one interface has a Low-Priority setting, the first available Low-Priority interface becomes
the clock source.

Once the Stinger chooses an interface as the clock source, it uses that interface until it becomes
unavailable, or a until a higher-priority source becomes available.

Example: set clock-priority=middle-priority

2-52 Stinger Reference Guide

Stinger Profile and Parameter Reference
Clock-Source

Location: DS3-ATM {shelf-N trunk-module-N N} > Line-Config,

OC3-ATM {shelf-N trunk-module-N N} > Line-Config

Usage: Specify one of the following values:

• Eligible (the default) specifies that the unit obtains the system clock signal from the port.
• Not-Eligible specifies that the unit does not obtain the system clock signal from the port.

Example: set clock-source=eligible

Location: DS3-ATM {shelf-N trunk-module-N N} > Line-Config,

OC3-ATM {shelf-N trunk-module-N N} > Line-Config

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the system generates a trap when the Stinger reinitializes itself so that
the configuration of the SNMP manager or the system itself might be altered.
• No specifies that the system does not generates a trap when the Stinger reinitializes itself
so that the configuration of the SNMP manager or the system itself might be altered.

Example: set coldstart-enabled=no

Location: Trap host-name

Example: set community-name=mycomm

Location: Trap host-name

Stinger Reference Guide 2-53

Stinger Profile and Parameter Reference
Config-Change-Enabled

Config-Change-Enabled
Description: Specifies whether the SNMP configuration-change trap is enabled.

Usage: Specify Yes or No. The default is Yes.

Example: set config-change-enabled=no

Location: Trap name

2-54 Stinger Reference Guide

Stinger Profile and Parameter Reference
Console-Enabled

Console-Enabled
Description: Specifies whether the system generates a trap when the console has changed
state.

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the system generates a trap when the console has changed state.
• No specifies that the system does not generate a trap when the console has changed state.

Example: set console-enabled=no

Location: Trap host-name

Example: set contact=rchu

Location: SNMP

Stinger Reference Guide 2-55

Stinger Profile and Parameter Reference
Context N

Context N
Description: A subprofile of the Context subprofile. Context N contains configuration
options for an individual controller. The index for each subprofile is a controller number.

Usage: With a Redundancy profile as the working profile, use the List command to display
the configuration for one of the controllers. For example, to display the configuration for the
primary controller:
admin> list context 1
[in REDUNDANCY:context[1]]
must-agree=False
primary-preference=may-be-primary

You can then use the Set command to modify the settings in the subprofile. To close the
subprofile and return to a higher context in the working profile:
admin> list ..

Location: Redundancy > Context

Usage: Specify a text string of up to 16 characters. The default is null.

Dependencies: If Encapsulation-Protocol is not set to ATM or ATM-Circuit, Contract-Name

does not apply.

Location: ATM-QoS

Usage: The Countries-Enabled setting is read only.

Example: countries-enabled=0

Location: Base

2-56 Stinger Reference Guide

Stinger Profile and Parameter Reference
CP-Bit-Error-Count

CP-Bit-Error-Count
Description: Indicates the number of parity errors on C-Bit-Parity lines since the last time the
unit was reset.

Usage: The CP-Bit-Error-Count value is read only.

Example: cp-bit-error-count=0

Location: DS3-ATM-Stat {shelf-N slot-N N}

Usage: Specify Yes or No. The default is No.

Example: set csm-modem-diag=yes

Dependencies: A JEDEC card is required if you set CSM-Modem-Diag to Yes.

Location: SNMP

Current-State
Description: In a Slot-State profile, indicates the current operational state of the slot. In an
ATMPVC-Stat profile, indicates the current state of the Asynchronous Transfer Mode (ATM)
Permanent Virtual Circuit (PVC). In an ATMVCC-Stat profile, indicates the current state of
the ATM Virtual Channel Connection (VCC).

Usage: The Current-State value is read only. In a Slot-State profile, Current-State can have
one of the following values:

State Description
Oper-State-Down The slot is in a nonoperational state.
Oper-State-Up The slot is in normal operations mode.
Oper-State-Diag The slot is in diagnostics mode.
Oper-State-Dump The slot is dumping its memory.
Oper-State-Pend While the slot is no longer down, it is not yet ready for normal opera-
tion. This value denotes a transitional state in which additional
shelf-to-slot communications are required to make the slot fully opera-
tional.
Oper-State-Post indi- The slot is running a self-test.
cates
Oper-State-None The slot is empty.

Stinger Reference Guide 2-57

Stinger Profile and Parameter Reference
Current-State

In an ATMPVC-Stat profile, Current-State can have one of the following values:

State Description
PVC-Inactive The PVC is inactive.
PVC-Closed The PVC exists, but it is closed.
PVC-Data-Transfer The PVC is up and data can be transferred.

In an ATMVCC-Stat profile, Current-State can have one of the following values:

State Description
VCC-Inactive The VCC is inactive.
VCC-Closed The VCC exists, but it is closed.
VCC-Data-Transfer The VCC is up and data can be transferred.

Example: current-state=oper-state-up

Location: ATMPVC-Stat circuit-name, ATMVCC-Stat circuit-name,

Slot-State {shelf-N slot-N N}

2-58 Stinger Reference Guide

Stinger Profile and Parameter Reference
D

D
Data-Call-Enabled
Description: Indicates whether the Stinger supports data calls over ISDN lines.

Usage: The Data-Call-Enabled setting is read only. Yes indicates that the Stinger supports
data calls over ISDN lines. No indicates that the Stinger does not support data calls over ISDN
lines.

Example: data-call-enabled=yes

Location: Base

Location: SDSL {shelf-N slot-N N} > Line-Config

Usage: Specify one of the following settings:

Setting Specifies
Voice The call should be set up as a voice call, even if the Stinger transmits
(switched calls only) data over the channel.
56K The data rate to use with a switched-services line that uses AMI
and/or robbed-bit signaling.
56K-Restricted Data is transmitted to meet the density requirements for AMI-encoded
(the default) lines.
56K-Clear The call should be set up as a data call that uses 56 Kbps of the band-
width of the data channel.

Stinger Reference Guide 2-59

Stinger Profile and Parameter Reference
Data-Service

Setting Specifies
64K-Restricted The call should be set up as a data call at a rate of 64 Kbps on an
AMI-encoded line on which the sender transmits only non-zero data.
Use this setting with LAPD and AMI signaling.
64K-Clear The call should be set up as a data call that uses the full 64-Kbps band-
width of the data channel. Use this setting with B8ZS, LAPD, and SS7
signaling.
384K-Clear The call should be set up as a data call that connects to the
(switched calls only) Switched-384 data service. This AT&T data service does not require
Multi-Rate or GlobanD.
384K-Restricted The call should be set up as a data call that connects to Multi-Rate or
(switched calls only) GlobanD data services at 384 Kbps.
DWS-384-clear A 384-Kbps call coded as Multi-Rate, not H0.
(switched calls only)
1536K-Restricted The same as 1536K-Clear, but with a request for restricted data trans-
(switched calls only) fer. A binary 1 is inserted with each transmission in the least signifi-
cant bit.
128- to 1472-Kbps Available on a line with Multi-Rate or GlobanD data services. You
clear in multiples of can specify the following values:
64 (switched calls
128K-Clear, 192K-Clear, 256K-Clear, 320K-Clear, 448K-Clear,
only)
512K-Clear, 576K-Clear, 640K-Clear, 704K-Clear, 768K-Clear,
832K-Clear, 896K-Clear, 960K-Clear, 1024K-Clear, 1088K-Clear,
1152K-Clear, 1216K-Clear, 1280K-Clear, 1344K-Clear,
1408K-Clear, 1472K-Clear

Example: set data-service=voice

Dependencies: To ensure data integrity when Data-Service=Voice:

• Use only digital end-to-end connectivity. No analog signals should be present anywhere in
the link.
• Make sure that the phone company is not using any intervening loss plans to economize
on voice calls.
• Do not use echo cancellation. Analog lines can echo, and the technology that takes out the
echoes can also scramble data in the link.
• Do not make any modifications that can change the data in the link.

Location: Connection station > Telco-Options

2-60 Stinger Reference Guide

Stinger Profile and Parameter Reference
Date

Date
Description: A subprofile that shows the day of the week and the current system date.

Usage: With the Timedate profile as the working profile, list the Date subprofile. For
example:
admin> list date
[in TIMEDATE]
weekday=Friday
month=October
day=18
year=1996

You can then use the Set command to modify the settings in the subprofile.
admin> set weekday=Saturday
admin> set day=19

Note: You can also use the Date command to set the day of the week and the system date.

Example: set date day=19

Location: Timedate

Usage: Specify Yes or No. The default is No.

• Yes (the default) specifies that the Stinger displays the status screen when it authenticates
the profile.
• No specifies that the Stinger does not display the status screen when it authenticates the
profile.

Example: set default-status=yes

Dependencies: Default-Status applies to Telnet and console logins. It does not apply to use of
the Auth command.

Location: User name

Stinger Reference Guide 2-61

Stinger Profile and Parameter Reference
Desired-State

Usage: Specify one of the following values:

• Admin-State-Down specifies that the addressed device should terminate all operations and
enter the down state.
• Admin-State-Up specifies that the addressed device should come up in normal operations
mode.

Dependencies: You can change the administrative state of a device by using the SNMP Set
commands, or the Stinger Slot-d and Slot -u commands.

Example: set desired-state=admin-state-up

Location: Admin-State-Perm-If station, Admin-State-Phys-If {shelf-N slot-N N}

2-62 Stinger Reference Guide

Stinger Profile and Parameter Reference
Device-Address

Device-Address
Description: Specifies the address of a card.

Usage: The device address has the format {shelf slot item}, where:

Syntax element Description

shelf Specifies the shelf in which the item resides. If you are using a
single-shelf system, the shelf number is always 1.
slot Specifies the number of the item’s expansion slot. Physical expansion
slots are numbered from 1 to 16, starting with 1 for the slot just below
the shelf controller. The slot value 17, controller, or c specifies the
shelf controller card.
For example, to address the first slot on shelf 1:
{ 1 1 0 }
item Specifies an item on the slot card. Items are numbered starting with #1
for the leftmost item on the card. An item number of 0 (zero) denotes the
entire slot. For example, to address SDSL port #48 on a card in slot #2
on shelf 1:
{ 1 2 48 }

In most cases, the Device-Address value is obtained from the system. However, you can clone
a profile by reading an existing one and changing its device address. Use the List and Set
commands to modify the Device-Address value. For example:
admin> list device-address
[in ADMIN-STATE-PHYS-IF { shelf-1 slot-9 37 }]
shelf=shelf-1
slot=slot-9
item-number=37
admin> set shelf=shelf-2

As an alternative, you can just use the Set command. For example:
admin> set device-address shelf=shelf-2

Location: Admin-State-Phys-If {shelf-N slot-N N}, Device-State {{shelf-N slot-N N} N}

Stinger Reference Guide 2-63

Stinger Profile and Parameter Reference
Device-ID

Device-ID
Description: Specifies the identification number of the Access SS7 Gateway (ASG).

Usage: Accept the default of 0 (zero).

Dependencies: If Enabled=No in the SS7-Gateway profile, Device-ID does not apply.

Location: SS7-Gateway

Location: Device-State {{shelf-N slot-N N} N}

2-64 Stinger Reference Guide

Stinger Profile and Parameter Reference
Dev-Line-State

You can then use the Set command to modify the settings in the profile. To close the profile
and save your changes:
admin> write
DEVICE-STATE/{ { shelf-1 slot-4 2 } 15 } written

Dependencies: An SNMP manager can read the Device-State profile.

Usage: The Dev-Line-State value is read only.

RADSL values
For the RADSL interface, Dev-Line-State can have one of the following values:

Value Description
down There is no connection or the interface is disabled.
activation The interface is trying to train but is not yet detecting a modem at the
other end.
training The interface is training with a modem on the other end.
port-up The interface successfully trained up.
failed The interface failed training. (A log message specifies the reason.)
loopback The interface is in loopback test mode.

SDSL values
For the SDSL interface, Dev-Line-State can have one of the following values:

Value Description
config The interface is being configured.
deactivate Transitioning to the Down state.
inactive Starting up.
activating Waiting for CPE to start up.
active-rx Waiting for 4-level transmission from CPE.
port-up Connected to CPE and data can be transferred.
portup-pending- Loss of Signal or noise-margin error (noise greater than -5dB).
deactive
deactivate-lost Waiting for Loss of Signal Timer to expire.
hardware-test Hardware self-test is in progress.
out-of-service Interface is out of service.

Stinger Reference Guide 2-65

Stinger Profile and Parameter Reference
Dial-Number

Value Description
tip-ring-detect Running a simple internal bit-error rate test (BERT) to detect
correct tip-ring orientation.
forever-bert Running internal BERT to detect correct tip-ring orientation.
tip-wait1 Running internal BERT to detect correct tip-ring orientation.
tip-hunt Running internal BERT to detect correct tip-ring orientation.
tip-wait2 Running internal BERT to detect correct tip-ring orientation.
cell-delineation Attempting to recover ATM cells (idle cells as well as data cells)
from the receiving octets. If recovery is successful, the interface
transitions to the Up state.
deactivate-wait Waiting to transition to the Down state.

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Status,

SDSL-Stat {shelf-N slot-N N} > Physical-Status

Example: set dial-number=510-555-1212

Location: Connection station

Usage: Specify Yes or No. The default is No.

• Yes specifies that the Stinger stops advertising its IP dialout routes if no trunks are
available.
• No specifies that the Stinger continues to advertise its dialout routes, even if no trunks are
currently available. No is the appropriate setting unless you have redundant units or don’t
use dialout routes.

Example: set dialout-poison=no

2-66 Stinger Reference Guide

Stinger Profile and Parameter Reference
Directed-Broadcast-Allowed

Location: IP-Global

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the Stinger forwards directed broadcast traffic onto the interface and its
network.
• No specifies that the Stinger drops directed broadcast traffic that is not generated locally,
preventing it from propagating onto intermediary networks.

Example: set directed-broadcast-allowed=no

Dependencies: To protect all of the LAN interfaces against Denial of Services (DoS) attacks
that use directed broadcast traffic, you must set Directed-Broadcast-Allowed=No in all
IP-Interface profiles.

Location: IP-Interface {{shelf-N slot-N N} N}

Usage: The Disabled-Count setting is read only.

Example: disabled-count=0

Location: Device-Summary

Usage: Specify the local domain name. The default is null.

Example: set domain-name=abc.com

Location: IP-Global

Stinger Reference Guide 2-67

Stinger Profile and Parameter Reference
Down-Preference

Down-Preference
Description: Specifies the preference for an inactive IP route. The Stinger uses this value to
determine when to bring a route online.

When choosing which route to use, the router first compares the preference values, preferring
the lower number. If the preference values are equal, the router compares the metric values,
using the route with the lower metric.

Usage: Enter a number from 0 to 214748364. The lower the preference, the more likely the
Stinger will bring the route online.

Example: set down-preference=255

Location: Connection station > IP-Options

Usage: The Down-Stream-Latency value is read only.

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Status

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Status,

SDSL-Stat {shelf-N slot-N N} > Physical-Status

Usage: Specify Yes or No. The default is No.

• Yes specifies that the Stinger drops all packets that have a Loose or a Strict source route
among their IP options.
• No specifies that the Stinger forwards all source-routed packets, as described in RFC
1812.

2-68 Stinger Reference Guide

Stinger Profile and Parameter Reference
DS3-ATM (profile)

Example: set drop-source-routed-ip-packets=no

Location: IP-Global

Usage: Specify one of the following settings:

• Auto (the default) causes the system to load images for cards that are installed in the
Stinger, and to skip images for cards that are not installed.
• Load causes the system to load the image, even if there is no card of that type installed.
• Skip causes the system to skip the image, even if there is a card of that type installed.

Dependencies: A card is considered present in the system if a Slot-Type profile exists for that
card type. The system creates a Slot-Type profile when it first detects the presence of a card,
and does not delete the profile unless the administrator uses the Slot –r command to
permanently remove a card that is no longer installed in the system, or clears NVRAM. To
ensure that the system does not load unnecessary images, use Slot –r to remove Slot-Type
profiles for cards that are no longer installed in the system.

Location: Load-Select

Stinger Reference Guide 2-69

Stinger Profile and Parameter Reference
DS3-ATM-Stat

DS3-ATM-Stat
Description: A profile that enables you to check the status of a DS3-ATM card.

Usage: To make DS3-ATM-Stat the working profile and list its contents, use the Read and
List commands. For example:
admin> read ds3-atm-stat {1 7 1}
DS3-ATM-STAT/{ shelf-1 slot-7 1 } read
admin> list
physical-address*={shelf-1 slot-7 1 }
line-state=active
f-bit-error-count=0
p-bit-error-count=0
cp-bit-error-count=0
feb-error-count=0
bpv-error-count=0
loss-of-signal=False
loss-of-frame=False
yellow-receive=False
ais-receive=False

Location: Ethernet {shelf-N slot-N N}

2-70 Stinger Reference Guide

Stinger Profile and Parameter Reference
E

E
Early-Packet-Discard
Description: Specifies whether all cells in a packet should be discarded if the first cell cannot
be queued.

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the cell and all remaining cells are discarded.
• No specifies that the cell and all remaining cells are not discarded. However, when the end
of the current packet is detected, all the cells in the next packet are discarded.

Dependencies: If Encapsulation-Protocol is not set to ATM or ATM-Circuit,

Early-Packet-Discard does not apply.

Location: ATM-QoS

Example: set enabled=yes

Dependencies: When the OC3 interface is disabled, it transmits the OC3 Idle Signal to the
remote end.

Location: Alarm name, AL-DMT {shelf-N slot-N N}, Answer-Defaults, DS3-ATM {shelf-N
slot-N N}, Ethernet {shelf-N slot-N N}, OC3-ATM {shelf-N trunk-module-N N},
SDSL {shelf-N slot-N N}, SNMP, SS7-Gateway, Terminal-Server

Stinger Reference Guide 2-71

Stinger Profile and Parameter Reference
Encapsulation-Protocol

Encapsulation-Protocol
Description: Specifies the encapsulation method to use for the connection. Both sides of the
connection must support the specified encapsulation method. Usually, encapsulation protocols
have their own configuration options within the subprofile of a Connection profile.

Usage: Specify one of the following values:

• ATM for an Asynchronous Transfer Mode (ATM) connection in routed mode. Packets
arriving on the connection are routed at OSI layer 3.
• ATM-Circuit (the default) for point-to-point switch-through ATM connections.

Example: set encapsulation-protocol=atm

Location: Connection station

Enet
Description: Specifies the action to take when the code image for an Ethernet card is present
in a Tar file.

Usage: Specify one of the following settings:

Location: Load-Select

2-72 Stinger Reference Guide

Stinger Profile and Parameter Reference
Enet2

Enet2
Description: Specifies the action to take when the code image for an Ethernet-2 card is
present in a Tar file.

Usage: Specify one of the following settings:

Location: Load-Select

Usage: Specify Yes or No. The default is No.

• Yes specifies that, before allowing access, the Stinger compares the source IP address of
an SNMP manager to the host addresses specified by Read-Access-Hosts and
Write-Access-Hosts.
• No specifies that the Stinger does not compare IP addresses, but uses only the community
name to validate SNMP access.

Example: set enforce-address-security=yes

Dependencies: Read-Access-Hosts and Write-Access-Hosts do not restrict access unless

Enforce-Address-Security=Yes.

Location: SNMP

Stinger Reference Guide 2-73

Stinger Profile and Parameter Reference
Error

Error
Description: A read-only profile that provides information about any errors that occur when
the Stinger is running.

Usage: Use the Read and List commands to make Error the working profile and list its
contents. For example:
admin> read error 1
ERROR/1 read
admin> list
[in ERROR/1]
is-post=no
type=100
slot=17
user-profile=""
ip-address=0.0.0.0
stack-trace=[ 0 0 0 0 0 0 ]
loadname=unitsr
index*=1
shelf=1

See Also: Index, IP-Address, IS-Post, Loadname, Shelf, Slot, Stack-Trace, User-Profile

Error-Count
Description: Indicates the number of errors experienced by a line since the last reset.

Usage: Use the List command to display the number of errors. For example:
admin> list error-count
[in SDSL-STAT/{ shelf-1 slot-1 1 }:error-count]
error-count=0

Location: SDSL-Stat {shelf-N slot-N N}

Location: Ethernet {shelf-N slot-N N}

2-74 Stinger Reference Guide

Stinger Profile and Parameter Reference
Ether-Info

Ether-Info
Description: A profile that specifies the MAC address and link state of an Ethernet interface.
The Ether-Info profile is created when the Ethernet card enters an active state, and deleted
when the slot is brought down. The contents of the profile are not written to NVRAM.

Usage: Use the Read and List commands to make Ether-Info the working profile and list its
contents. For example:
admin> read ether-info { 1 2 1}
ETHER-INFO/{ shelf-1 slot-2 1 } read
admin> list
[in ETHER-INFO/{ shelf-1 slot-2 1 }]
interface-address*={ shelf-1 slot-2 1 }
mac-address=00:c0:7b:68:ef:98
link-state=up

Dependencies: The Ether-Info profile is read only.

Stinger Reference Guide 2-75

Stinger Profile and Parameter Reference
Event

Event
Description: Specifies an alarm event that triggers the actions indicated by the Action
subprofile.

Usage: Specify one of the following values:

• Power-Fail specifies that a redundant power supply fails.
• Fan-Fail specifies that a redundant fan fails.
• Line-State-Change (the default) specifies that the Stinger detects a state change in a line.
• Slot-State-Change specifies that the Stinger detects a state change in a slot.

Example: set event=fan-fail

Location: Alarm name

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the system generates a trap when a new event has overwritten an unread
event.
• No specifies that the system does not generate a trap when a new event has overwritten an
unread event.

Example: set event-overwrite-enabled=no

Location: Trap host-name

2-76 Stinger Reference Guide

Stinger Profile and Parameter Reference
Ext-Tsrv

You can then use the Set command to modify the settings in the profile. To close the profile
and save your changes:
admin> write
EXTERNAL-AUTH written

Usage: The Refresh -t command requests initial-banner and banner/hosts information

from RADIUS as two separate requests, which independently update the Ext-Tsrv profile. If
the information changes the profile contents, the system notifies the slot cards and they update
their information.

Use the Read and List commands to make Ext-Tsrv the working profile and list its contents.
For example:
admin> read ext-tsrv
EXT-TSRV read
admin> list init-banner
[in EXT-TSRV:init-banner]
init-banner[1]=""
init-banner[2]=""
init-banner[3]=""
init-banner[4]=""
init-banner[5]=""
init-banner[6]=""
init-banner[7]=""
init-banner[8]=""
init-banner[9]=""
init-banner[10]=""
init-banner[11]=""
init-banner[12]=""
init-banner[13]=""
init-banner[14]=""
init-banner[15]=""
init-banner[16]=""
admin> list banner
[in EXT-TSRV:banner]
banner[1]=""
banner[2]=""
banner[3]=""
banner[4]=""
banner[5]=""
banner[6]=""
banner[7]=""
banner[8]=""
banner[9]=""

Stinger Reference Guide 2-77

Stinger Profile and Parameter Reference
Ext-Tsrv

banner[10]=""
banner[11]=""
banner[12]=""
banner[13]=""
banner[14]=""
banner[15]=""
banner[16]=""
admin> list hosts-info
[in EXT-TSRV:hosts-info]
hosts-info[1]={ 0.0.0.0 "" }
hosts-info[2]={ 0.0.0.0 "" }
hosts-info[3]={ 0.0.0.0 "" }
hosts-info[4]={ 0.0.0.0 "" }
hosts-info[5]={ 0.0.0.0 "" }
hosts-info[6]={ 0.0.0.0 "" }
hosts-info[7]={ 0.0.0.0 "" }
hosts-info[8]={ 0.0.0.0 "" }
hosts-info[9]={ 0.0.0.0 "" }
hosts-info[10]={ 0.0.0.0 "" }

2-78 Stinger Reference Guide

Stinger Profile and Parameter Reference
F

F
Facility
Description: Specifies the Syslog daemon facility code for messages logged from the Stinger.
For detailed information, see the syslog.conf manual page entry on the UNIX Syslog
server.

Usage: Specify one of the following values:

• Local0 (the default)
• Local1
• Local2
• Local3
• Local4
• Local5
• Local6
• Local7

Example: set facility=local0

Dependencies: The Facility value in the Log profile affects all data streams. The
Facility value in each Auxiliary-Syslog subprofile affects the individual data stream directed to
the device specified by the Host value, and overrides the value in the Log profile.

Location: Log, Log > Auxiliary-Syslog > Auxiliary-Syslog N

Usage: The Far-End-CRC value is read only.

Example: far-end-crc=0

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Statistic

Stinger Reference Guide 2-79

Stinger Profile and Parameter Reference
Far-End-dB-Attenuation

Far-End-dB-Attenuation
Description: Indicates the attenuation of the signal received from the CPE.

Usage: The Far-End-dB-Attenuation setting is read only.

Location: SDSL-Stat {shelf-N slot-N N} > Physical-Statistic

Usage: The Far-End-FEC value is read only.

Example: far-end-fec=0

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Statistic

Usage: The Far-End-HEC value is read only.

Example: far-end-hec=0

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Statistic

2-80 Stinger Reference Guide

Stinger Profile and Parameter Reference
F-Bit-Error-Count

You can then use the Set command to modify the settings in the subprofile. To close the
subprofile and return to a higher context in the working profile:
admin> list ..

Location: AL-DMT {shelf-N slot-N N}

Usage: The F-Bit-Error-Count value is read only.

Example: f-bit-error-count=0

Location: DS3-ATM-Stat {shelf-N slot-N N}

Usage: The FEB-Error-Count value is read only.

Example: feb-error-count=0

Location: DS3-ATM-Stat {shelf-N slot-N N}

Usage: The FIFO-Overflow-Counter value is read only.

Example: fifo-overflow-counter=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N}

Stinger Reference Guide 2-81

Stinger Profile and Parameter Reference
Firmware-Startup-Stage

Firmware-Startup-Stage
Description: Indicates the current firmware state.

Usage: The Firmware-Startup-Stage value is read only.

Location: SDSL-Stat {shelf-N slot-N N} > Physical-Statistic

Usage: The Firmware-Ver value is read only.

Example: firmware-ver=1.4.1

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Status

Flow-Control
Description: Specifies the flow control method used on the serial port.

Usage: Specify one of the following values:

• None (the default)
• Xon-Xoff
• Hardware-Handshake

Example: set flow-control=xon-xoff

Location: Serial {shelf-N slot-N N}

Usage: Specify Yes or No. The default is No.

• Yes causes the Stinger to use only the 56-Kbps portion of a channel.
• No specifies that the Stinger uses the full 64-Kbps bandwidth, if it is available.

Example: set force-56kbps=no

Location: Answer-Defaults, Connection station > Telco-Options

2-82 Stinger Reference Guide

Stinger Profile and Parameter Reference
Framed-Only

Framed-Only
Description: Specifies whether an incoming call must use a framed protocol.

Usage: Specify Yes or No. The default is No.

• Yes specifies that an incoming call must use a framed protocol.
• No specifies that an incoming call need not use a framed protocol.

Example: set framed-only=yes

Location: Connection station

Usage: Specify one of the following values:

• C-Bit-ADM specifies free-running and fixed-stuffing C-Bit-ADM mode.
• C-Bit-PLCP (the default) specifies free-running and fixed-stuffing C-Bit-PLCP mode.
• C-Bit-ADM-Loop-Timed specifies loop-timed C-Bit-ADM mode.
• C-Bit-PLCP-Loop-Timed specifies loop-timed C-Bit-PLCP mode.
• C-Bit-ADM-Frame-Locked specifies frame-locked C-Bit-ADM mode.
• C-Bit-PLCP-Frame-Locked specifies frame-locked C-Bit-PLCP mode.

Example: set framer-mode=c-bit-plcp-frame-locked

Location: DS3-ATM {shelf-N shelf-N N} > Line-Config

Location: OC3-ATM {shelf-N trunk-module-N N} > Line-Config

Frequency-Justification-Count
Description: Indicates the number of frequency justification operations.

Usage: The Frequency-Justification-Count value is read only.

Example: frequency-justification-count=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N}

Stinger Reference Guide 2-83

Stinger Profile and Parameter Reference
G

G
Gateway-Address
Description: Specifies the address of the next-hop router the Stinger uses to reach the
destination address specified by a static route. A next-hop router is directly connected to the
Stinger on the Ethernet, or is one hop away on a WAN link.

Usage: Specify the IP address of the router the Stinger uses to reach the target host for the
route. The default is 0.0.0.0.

Example: set gateway-address=10.207.23.1

Location: IP-Route name

2-84 Stinger Reference Guide

Stinger Profile and Parameter Reference
H

H
Hardware-Level
Description: Indicates a one- or two-character string representing the hardware revision level
of the card.

Usage: The Hardware-Level setting is read only. A value of 0 (zero) means that the revision
level is unknown.

Location: Base, Slot-Info {shelf-N slot-N N}

Usage: The Hardware-Rework-Count setting is read only.

Location: Slot-Info {shelf-N slot-N N}

Usage: The Hardware-Ver setting is read only.

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Status

SDSL-Stat {shelf-N slot-N N} > Physical-Status

Usage: The HEC-Cell-Drop-Counter value is read only.

Example: hec-cell-drop-counter=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N}

Stinger Reference Guide 2-85

Stinger Profile and Parameter Reference
High-Tx-Output

High-Tx-Output
Description: Specifies whether the DS3 cable length is more than 255 feet.

Usage: Specify Yes or No. The default is No.

• Yes specifies that the DS3 cable length is more than 255 feet.
• No specifies that the DS3 cable length less than 255 feet.

Example: set high-tx-output=yes

Location: DS3-ATM {shelf-N slot-N N} > Line-Config

Host
Description: Specifies the DNS hostname or address of a host on the network, as follows:
• In the Log profile and Auxiliary-Syslog subprofile, the Host value specifies the IP address
of a UNIX Syslog server.
• In the Terminal-Server profile, the Host value specifies the name, IP address, or X.121
address of the host to use for immediate service. When the Stinger authenticates a
connection, it immediately directs the data stream to the specified host.

Usage: Your usage depends on the profile:

• For the Log profile and Auxiliary-Syslog subprofile, specify the IP address of a UNIX
Syslog server. The default is 0.0.0.0.
• For the Terminal-Server profile, specify the name, IP address, or X.121 address of the host
to use for immediate service. The default is a null string or null address.

Dependencies: The Host value in the Log profile affects all data streams. The Host value in
each Auxiliary-Syslog subprofile affects the individual data stream directed to the specified
device, and overrides the value in the Log profile.

Location: Log, Log > Auxiliary-Syslog > Auxiliary-Syslog N,

Terminal-Server > Immediate-Mode-Options

Example: set host-1=10.1.2.3/29

Dependencies: If terminal services are disabled, Host-N does not apply. In addition, the
Stinger ignores the host addresses if Remote-Configuration=Yes. If you want to specify more
than four addresses, you must do so in RADIUS.

2-86 Stinger Reference Guide

Stinger Profile and Parameter Reference
Host-Address

Location: Terminal-Server > Menu-Mode-Options

Usage: Specify an IP address in dotted decimal notation. The default is 0.0.0.0. If

Host-Address is set to 0.0.0.0 and DNS (or YP/NIS) is supported, the Stinger looks up the host
address and sends trap-PDUs. If Host-Address is set to 0.0.0.0 and Community-Name is null,
traps are disabled.

Example: set host-address=10.2.3.4/24

Location: Trap host-name

Usage: Specify a hostname of up to 16 characters. The default is null.

Example: set host-name=sparky

Dependencies: Consider the following:

• If Host-Address is set, the Stinger does not use the Host-Name value.
• The Stinger sends SNMP traps to the host you specify.
• When DNS or YP/NIS is supported, but Host-Address is not specified, the Stinger uses
the hostname to look up the LAN address of the SNMP manager.

Location: Trap host-name

Usage: The Hosts-Info setting is read only.

Example: hosts-info [1]={ 200.50.40.5 }

Location: Ext-Tsrv

Stinger Reference Guide 2-87

Stinger Profile and Parameter Reference
I

I
ICMP-Reply-Directed-Bcast
Description: Specifies whether the Stinger responds to directed-broadcast ICMP echo
requests.

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the Stinger responds to directed-broadcast ICMP echo requests.
• No specifies that the Stinger does not respond to directed-broadcast ICMP echo requests.

Example: set icmp-reply-directed-bcast=no

Location: IP-Global

Usage: Specify up to 16 characters. The default is null.

Example: set id-auth-prefix=test

Location: External-Auth > Rad-Auth-Client

Usage: The Idle-Cell-Counter value is read only.

Example: idle-cell-counter=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N}

2-88 Stinger Reference Guide

Stinger Profile and Parameter Reference
Idle-Logout

Idle-Logout
Description: Specifies the number of seconds a Telnet session can remain logged in with no
keyboard activity.

Usage: Specify a number of seconds. The default is 0 (zero), which specifies that the station
can remain logged in indefinitely.

Example: set idle-logout=60

Location: System, User name

Example: set idle-timer=30

Dependencies: The Idle-Timer value applies only to sessions in which the Stinger transmits
data in packets through the router to the WAN connection. Idle-Timer does not apply to
nailed-up or terminal-server connections. For a terminal-server connection, use TS-Idle-Timer.

Location: Answer-Defaults > Session-Info, Connection station > Session-Options

Usage: The IF-Group-Index setting is read only.

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Status

SDSL-Stat {shelf-N slot-N N} > Physical-Status

Stinger Reference Guide 2-89

Stinger Profile and Parameter Reference
IF-Remote-Address

IF-Remote-Address
Description: Specifies the IP address of the numbered interface at the remote end of a link.

Usage: Specify the IP address of the numbered interface in dotted decimal notation. The
default is 0.0.0.0.

Dependencies: For IF-Remote-Address to apply, you must enable IP for the Connection
profile.

Location: Connection station > IP-Options

Usage: Specify Yes or No. The default is No.

• Yes specifies that the Stinger ignores advertised default routes. Lucent recommends that
you specify Yes.
• No specifies that the Stinger can modify its default route on the basis of RIP updates.

Example: set ignore-def-route=yes

Location: IP-Global

Usage: Specify Yes or No. The default is No.

• Yes causes the Stinger to ignore ICMP redirect packets.
• No causes the Stinger to process ICMP redirect packets.

Example: set ignore-icmp-redirects=yes

Location: IP-Global

2-90 Stinger Reference Guide

Stinger Profile and Parameter Reference
Immediate-Mode-Options

Immediate-Mode-Options
Description: A subprofile containing terminal-server configuration options for immediate
mode. In immediate mode, the Stinger makes a connection to an IP host immediately upon
login.

Usage: With Terminal-Server as the working profile, list the Immediate-Mode-Options

subprofile. For example:
admin> list immediate-mode-options
[in TERMINAL-SERVER:immediate-mode-options]
service=none
telnet-host-auth=no
host=""
port=0

You can then use the Set command to modify the settings in the subprofile. To close the
subprofile and return to a higher context in the working profile:
admin> list ..

Location: Terminal-Server

Usage: The Index setting is read only.

Location: Error index

Location: Admin-State-Perm-If station

Stinger Reference Guide 2-91

Stinger Profile and Parameter Reference
Init-Banner N

Init-Banner N
Description: Specifies the initial-banners for terminal-server logins, downloaded from
RADIUS.

Usage: The Init-Banner setting is read only.

Example: init-banner [1]="Welcome"

Location: Ext-Tsrv

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Status

Alternatively, just use the Set command:

admin> set interface-address logical-item=11

Location: Ethernet {shelf-N slot-N N}, IP-Interface {{shelf-N slot-N N}

2-92 Stinger Reference Guide

Stinger Profile and Parameter Reference
Interleave-Path-Config

Interleave-Path-Config
Description: A subprofile that enables you to define minimum, maximum, and planned
upstream and downstream bit rates for a rate-adaptive connection on an interleaved channel.

Usage: With AL-DMT as the working profile, list the Interleave-Path-Config subprofile. For
example:
admin> read al-dmt {1 4 1}
AL-DMT/{ shelf-1 slot-4 1 } read
admin> list interleave
[in AL-DMT/{ shelf-1 slot-4 1 }:interleave-path-config]
min-bitrate-up=0
min-bitrate-down=0
max-bitrate-up=0
max-bitrate-down=0
planned-bitrate-up=0
planned-bitrate-down=0
max-delay-up=16
max-delay-down=16

You can then use the Set command to modify the settings in the subprofile. To close the
subprofile and return to a higher context in the working profile:
admin> list ..

Location: AL-DMT {shelf-N slot-N N}

Usage: With OC3-ATM-Stat as the working profile, list Interval- Performance-Monitoring.

For example:
admin> list interval-performance-monitoring 1
[in OC3-ATM-STAT/{ shelf-1 trunk-module-2 1 }:interval-performance-
monitoring[1]]
sonet-section-errored-seconds=0
sonet-section-severely-errored-seconds=0
sonet-section-severely-errored-framing-seconds=0
sonet-section-coding-violations=0
sonet-line-errored-seconds=0
sonet-line-severely-errored-seconds=0
sonet-line-coding-violations=0
sonet-line-unavailable-seconds=0
sonet-far-end-line-errored-seconds=0
sonet-far-end-line-severely-errored-seconds=0
sonet-far-end-line-coding-violations=0
sonet-far-end-line-unavailable-seconds=0
sonet-path-errored-seconds=0

Stinger Reference Guide 2-93

Stinger Profile and Parameter Reference
IP-Address

sonet-path-severely-errored-seconds=0
sonet-path-coding-violations=0
sonet-path-unavailable-seconds=0
sonet-far-end-path-errored-seconds=0
sonet-far-end-path-severely-errored-seconds=0
sonet-far-end-path-coding-violations=0
sonet-far-end-path-unavailable-seconds=0

You can then use the Set command to modify the settings in the subprofile. To close the
subprofile and return to a higher context in the working profile:
admin> list ..

Dependencies: The information in the Performance-Monitoring subprofile is used to update

the values in the Interval-Performance-Monitoring subprofile.

Location: OC3-ATM-Stat {shelf-N trunk-module-N N}

Example: set ip-address=10.2.3.4/24

Location: Error, IP-Interface {{shelf-N slot-N N} N}

2-94 Stinger Reference Guide

Stinger Profile and Parameter Reference
IP-Answer

IP-Answer
Description: A subprofile containing default settings for IP calls, regardless of their
encapsulation protocol.

Usage: With Answer-Defaults as the working profile, list the IP-Answer subprofile. For
example:
admin> list ip-answer
[in ANSWER-DEFAULTS:ip-answer]
enabled=yes
vj-header-prediction=yes
routing-metric=1

You can then use the Set command to modify the settings in the subprofile. To close the
subprofile and return to a higher context in the working profile:
admin> list ..

Location: Answer-Defaults

Example: set ip-direct=10.1.2.3/24

Dependencies: When you use IP-Direct routing, a remote user cannot establish a Telnet
session directly to the Stinger.

Location: Connection station > IP-Options

Stinger Reference Guide 2-95

Stinger Profile and Parameter Reference
IP-Global

admin> list
[in IP-GLOBAL]
domain-name=abc.com
system-ip-addr=0.0.0.0
rip-policy=poison-rvrs
summarize-rip-routes=no
bootp-enabled=no
ignore-icmp-redirects=no
drop-source-routed-ip-packets=no
ignore-def-route=yes
rarp-enabled=no
udp-cksum=yes
tcp-timeout=0
dialout-poison=no
telnet-password=""
user-profile=""
static-pref=100
rip-pref=100
rip-tag=c8:00:00:00
sec-domain-name=""
icmp-reply-directed-bcast=yes
bootp-relay=[ no bootp-servers { 0.0.0.0 0.0.0.0 }]
suppress-host-routes=no

You can then use the Set command to modify the settings in the profile. To close the profile
and save your changes:
admin> write
IP-GLOBAL written

2-96 Stinger Reference Guide

Stinger Profile and Parameter Reference
IP-Interface

IP-Interface
Description: A profile containing configuration options for an IP interface.

Each packet-handling slot card operates as a router subsystem with its own local interface
table. The Stinger router card holds the global interface table. The interface address of an
IP-Interface profile is the local address on a slot card. Each interface has its own IP address.
When the Stinger generates IP packets, the packets have the source address of the IP interface
on which they are forwarded. If the Stinger receives IP packets destined for one of its IP
addresses, it accepts the packets, even if they arrive on a different interface and the
destination-address interface is not active.

Usage: You can specify up to 16 IP-Interface profiles for each Ethernet card. Each profile
specifies a single IP address.

The Stinger creates a default IP-Interface profile when it first detects the presence of an
Ethernet card or the shelf-controller Ethernet port. For example, for the first Ethernet port on a
card in shelf 1, slot 12, the default IP-Interface profile uses the following index:
{{1 12 1} 0}

The index consists of a physical address and a logical-item number in the following format:
{{shelf slot item} logical-item }

The logical item number addresses a specific logical interface or port. The logical item number
is 0 (zero), except when you configure multiple interfaces or the device supports multiple
channels. For example, another IP-Interface profile for {1 12 1} might use the following index:
{{1 12 1} 1}

The logical-item numbers do not have to be consecutive, but they must be unique.

The Stinger supports a soft IP interface, which is an internal interface that never goes down.
The IP-Interface profile with the zero index is reserved for the soft interface. As long as one of
the Stinger IP interfaces is up, the soft interface address is reachable. The soft IP interface is
associated only with the primary CM, regardless of which slot is operating as primary. The soft
interface is hidden from the secondary CM. When the system powers on, it waits until a
controller becomes the primary CM before setting up the soft interface. If a switchover occurs
(so the secondary CM becomes primary), the system reinitializes the soft interface at that time.

If RIP is enabled, the Stinger advertises the interface address as a host route with a mask of /32
using the loopback interface. If RIP is not enabled, routers one hop away from the Stinger must
have a static route to the soft interface address. The following commands set the soft interface
IP address to 1.1.1.128/24:
admin> read ip-interface { 0 0 0 }
IP-INTERFACE/{ { any-shelf any-slot 0 } 0 } read
admin> set ip-addr=1.1.1.128/24
admin> write
IP-INTERFACE/{ { any-shelf any-slot 0 } 0 } written

Stinger Reference Guide 2-97

Stinger Profile and Parameter Reference
IP-Options

Dependencies: Consider the following:

• For IP-Interface profiles, the default profile (with the zero logical-item number) must have
an IP address configured, or none of the other IP-Interface profiles for the same port will
function. Do not delete the default profile if you want your other configurations to work.
• If Proxy-Mode is enabled in any of the IP-Interface profiles for a given Ethernet port, it is
enabled for all ARP requests coming into the physical port.

Location: Connection station

2-98 Stinger Reference Guide

Stinger Profile and Parameter Reference
IP-Route

IP-Route
Description: A profile containing the information required by the IP router for setting up
static routes. The Stinger passes the static routes to the router at startup, and updates the
routing table whenever a route changes.

Usage: Use the Read and List commands to make IP-Route the working profile and list its
contents. For example:
admin> read ip-route default
IP-ROUTE/default read
admin> list
[in IP-ROUTE/default]
name*=default
dest-address=0.0.0.0/0
gateway-address=0.0.0.0
metric=1
cost=1
preference=100
third-party=no
private-route=yes
active-route=no

You can then use the Set command to modify the settings in the profile. To close the profile
and save your changes:
admin> write
IP-ROUTE/default written

Usage: Specify Yes or No. The default is Yes.

• Yes enables IP routing for the link. For your setting to have any effect, IP routing must be
enabled on both the dialing and answering sides of the link.
• No disables IP routing for the link.

Example: set ip-routing-enabled=yes

Location: Connection station > IP-Options

Stinger Reference Guide 2-99

Stinger Profile and Parameter Reference
IS-Post

IS-Post
Description: Indicates whether the error specified in the Error profile occurred during a
Power-On Self Test (POST).

Usage: The IS-Post setting is read only. Yes indicates that the error occurred during a POST.
No indicates that the error did not occur during a POST.

Example: is-post=no

Location: Error

Example: set item-number=24

Location: Device-Address, Physical-Address

2-100 Stinger Reference Guide

Stinger Profile and Parameter Reference
L

L
Left-Status
Description: Specifies the default content of the left side of the status window.

Usage: Specify one of the following values:

• Session-List specifies that the Stinger displays current system administration sessions on
the left side of the status window.
• Connection-List specifies that the Stinger displays current system WAN sessions on the
left side of the status window.

Example: set left-status=connection-list

Location: User name

Stinger Reference Guide 2-101

Stinger Profile and Parameter Reference
LIM-Sparing-Config

LIM-Sparing-Config
Description: A profile that enables you to specify Line Interface Module (LIM) sparing and
to determine the primary and secondary LIM.

Usage: Use the Read and List commands to make LIM-Sparing-Config the working profile:
admin> read lim-sparing-config
LIM-SPARING-CONFIG read
admin> list
[in LIM-SPARING-CONFIG]
sparing-mode=inactive
spare-slot-number=any-slot
manually-spared-slot-number=any-slot
You can then use the Set command to modify the settings in the profile. To close the profile
and save your changes:
admin> write
LIM-SPARING-CONFIG written
See Also: Manually-Spared-Slot-Number, Spare-Slot-Number, Sparing-Mode

LIM-Sparing-Status
Description: A read-only profile that indicates whether Line Interface Module (LIM) sparing
is enabled, as well as the slot numbers of the primary and secondary LIMs.
Usage: Use the Read and List commands to make LIM-Sparing-Status the working profile:
admin> read lim-sparing-status
LIM-SPARING-STATUS read
admin> list
[in LIM-SPARING-STATUS]
sparing-mode=inactive
spare-slot-number=any-slot
spared-slot-number=any-slot

Usage: Currently, only the Full-DMT value is supported.

Location: AL-DMT {shelf-N slot-N N} > Line-Config

2-102 Stinger Reference Guide

Stinger Profile and Parameter Reference
Line-Config

Line-Config
Description: A subprofile containing line configuration options for an AL-DMT, OC3-ATM,
ATM-DS3, or SDSL card.

Usage: With AL-DMT, OC3-ATM, DS3-ATM, or SDSL as the working profile, list the
Line-Config subprofile. For example:
admin> list line-config
[in SDSL:line-config]
trunk-group=0
nailed-group=2
activation=static
data-rate-mode=singlebaud
max-rate=784000
unit-type=coe

You can then use the Set command to modify the settings in the subprofile. To close the
subprofile and return to a higher context in the working profile:
admin> list ..

Location: AL-DMT {shelf-N slot-N N}, OC3-ATM {shelf-N trunk-module-N N},

DS3-ATM {shelf-N slot-N N}, SDSL {shelf-N slot-N N}

Usage: Specify one of the following values:

• Fast (the default) specifies non-interleaved channels.
• Interleave specifies interleaved channels.

Location: AL-DMT {shelf-N slot-N N} > Line-Config

Usage: Specify one of the following values:

• Fast (the default) specifies non-interleaved channels.
• Interleave specifies interleaved channels.

Location: AL-DMT {shelf-N slot-N N} > Line-Config

Stinger Reference Guide 2-103

Stinger Profile and Parameter Reference
Line-Quality

Line-Quality
Description: Indicates the line quality (in decibels). For an SDSL interface, a reading of -5dB
or better is required for reliable data transfer.

Usage: The Line-Quality setting is read only.

Location: SDSL-Stat {shelf-N slot-N N} > Physical-Statistic

2-104 Stinger Reference Guide

Stinger Profile and Parameter Reference
Line-Up-Timer

Line-Up-Timer
Description: Indicates the length of time the line has been in the up state.

Usage: The Line-Up-Timer value is read only. It has the following format:
{hh mm ss}

where hh is the number of hours, mm is the number of minutes, and ss is the number of
seconds

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Statistic,

SDSL-Stat {shelf-N slot-N N} > Physical-Statistic

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the system generates a trap when a failure occurs in a communication
link between the unit and the SNMP manager.
• No specifies that the system does not generate a trap when a failure occurs in a
communication link between the unit and the SNMP manager.

Example: set linkdown-enabled=no

Location: Trap host-name

Location: Ether-Info {shelf-N slot-N N}

Stinger Reference Guide 2-105

Stinger Profile and Parameter Reference
Link-State-Enabled

Link-State-Enabled
Description: Specifies whether the value of Link-State affects the IP routing tables.

Usage: Specify Yes or No. The default is No.

• Yes specifies that the Stinger deletes routes to an interface when Link-State is Down, and
adds them when the interface comes up again.
• No specifies that the Stinger routes packets to an interface regardless of the Link-State
setting. If the interface is down, the Stinger discards the packets. They cannot use an
alternative route.

Example: set link-state-enabled=yes

Location: Ethernet {shelf-N slot-N N}

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the system generates a trap when the communication link between the
unit and the SNMP manager comes back up.
• No specifies that the system does not generate a trap when the communication link
between the unit and the SNMP manager comes back up.

Example: set linkup-enabled=no

Location: Trap host-name

Usage: The Loadname setting is read only.

Example: loadname=load1

Location: Error

2-106 Stinger Reference Guide

Stinger Profile and Parameter Reference
Local-Address

Following a system reset, the Stinger creates the Load-Select profile if it is not present. The
profile lists the entire set of supported slot-card images and an intended load action for each
card type when the image is present in a Tar file. It also contains an Unknown-Cards setting,
which represents new cards that were not supported in the previous system version. When
loading the Tar file, the system uses settings in the Load-Select profile to load only specific
slot-card images. To prevent version-related problems, it then deletes code images that were
present on the flash card but were not updated.

Usage: Use the Read and List commands to make Load-Select the working profile and list its
contents. For example:
admin> read load-select
LOAD-SELECT read
admin> list
[in LOAD-SELECT]
unknown-cards=auto
uds3=auto
ds3-atm=auto
enet=auto
enet2=auto
sdsl=auto

You can then use the Set command to modify the settings in the profile. To close the profile
and save your changes:
admin> write
LOAD-SELECT written

Dependencies: An explicit Load command for a particular card type overrides the settings in
the Load-Select profile.

Example: set local-address=10.2.3.4/24

Dependencies: The Local-Address value cannot be an address assigned in an IP-Interface

profile to one of the unit’s physical LAN interfaces, nor can it be the IP address of the
shelf-controller Ethernet port.

Location: Connection station > IP-Options

Stinger Reference Guide 2-107

Stinger Profile and Parameter Reference
Local-Echo

Local-Echo
Description: Allows you to configure local-echo mode for a terminal-server session.
Local-echo mode is a line-by-line mode. The line appears as the user types it, but is not
transmitted until the user enters a carriage return. If local echo is enabled, the line transmitted
is echoed on the local Stinger terminal screen. Local echo allows Stinger terminal-server users
to connect to nonstandard Telnet ports and programs. If the remote server turns local echo on
or off in its option negotiation for a Telnet session, the negotiated setting overrides the value of
Local-Echo.

Usage: Specify Yes or No. The default is No.

• Yes turns on local echo.
• No disables local echo.

Example: set local-echo=yes

Dependencies: If terminal services are disabled, Local-Echo does not apply. A

terminal-server user can override the Local Echo setting from the command line by using the
-e option of the Telnet command.

Location: Terminal-Server > Terminal-Mode-Configuration > Telnet-Options

Usage: Specify one of the following settings:

• LPF-Yes (the default) specifies that the Stinger first attempts to authenticate the
connection with a local profile. If the profile exists and the password matches, the Stinger
allows the connection. If no local profile exists, or if a local profile exists but the password
fails, the Stinger tries to authenticate the connection through an external authentication
server.
• LPF-No specifies that the Stinger first tries to authenticate the connection through a
remote authentication server. If the server acknowledges the request, it allows the
connection. If the server NAKs the request and remote authentication fails (because no
remote profile exists, or a remote profile exists but the password fails), or if the remote
authentication server cannot be reached, the Stinger attempts to authenticate the
connection with a local profile.
• LPF-RNo specifies that the Stinger first tries to authenticate the connection through a
remote authentication server. If the profile exists and the password matches, the Stinger
allows the connection. If the server doesn't respond, the Stinger checks for a matching
local profile. If the server NAKs the request and remote authentication fails, the Stinger
terminates the connection.

Example: set local-profiles-first=lpf-no

2-108 Stinger Reference Guide

Stinger Profile and Parameter Reference
Location

Dependencies: Consider the following:

• If Auth-Type=None, Local-Profiles-First does not apply.
• PAP-Token authentication does not produce a challenge with a local profile. Using a local
profile defeats the security of using PAP-Token.
• When you use a local profile, PAP-Token-CHAP brings up one channel, but all other
channels fail.
• If the remote end of the connection has ever been authenticated with a challenge,
Cache-Token does not work with a local profile. If the remote end has never been
authenticated, no problem occurs when using a local profile.
• When you set Local-Profiles-First=LPF-No, the Stinger waits for the remote
authentication to time out before attempting to authenticate locally. This timeout might
take longer than the timeout specified for the connection and could cause all connection
attempts to fail. Therefore, set the authentication timeout value low enough to guard
against the line going down, but high enough to permit the unit to respond if it can. The
recommended time is 3 seconds.

Location: External-Auth

Example: set location=building-64

Location: SNMP

Stinger Reference Guide 2-109

Stinger Profile and Parameter Reference
Log-Call-Progress

admin> list
[in LOG]
save-level=info
save-number=100
call-info=none
syslog-enabled=no
host=0.0.0.0
port=514
facility=local0
log-call-progress=yes
log-software-version=no
syslog-level=info
log-call-progress=yes
log-software-version=no
auxiliary-syslog={ no debug 10.40.40.41 514 local0 }{ no +

You can then use the Set command to modify the settings in the profile. To close the profile
and save your changes:
admin> write
LOG written

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the unit logs incoming call-progress messages.
• No specifies that the unit discards incoming call-progress messages.

Example: set log-call-progress=no

Location: Log

Log-Display-Level
Description: Specifies the lowest level of the log messages that the Stinger displays to a
logged-in user.

Usage: Specify one of the following settings:

Setting Lowest-level message indicates

2-110 Stinger Reference Guide

Stinger Profile and Parameter Reference
Login-Prompt

Setting Lowest-level message indicates

Warning An unusual event has occurred, but the unit is otherwise operating nor-
mally. For example, this type of message appears when a login attempt
has failed because the user entered an incorrect user name or password.
Notice Events of interest in normal operation have occurred (a link going up or
down, for example).
Info State and status changes that are commonly not of general interest have
occurred.
Debug Helpful debugging information.

Example: set log-display-level=debug

Dependencies: Do not confuse Log-Display-Level with Save-Level in the Log profile.

Save-Level determines which messages are displayed in the event-log status window.

Location: User name

If Prompt-Format=Yes, you can specify up to 80 characters in multiple lines by including the

newline (\n) and tab (\t) characters. To include an actual backslash character, you must precede
it with another backslash. For example, suppose you enter the following string:
Welcome to\n\t\\Lucent Remote Server\\\nEnter your user name:

The terminal server displays the following text as the login prompt:
Welcome to
\Lucent Remote Server\
Enter your user name:

Regardless of the Prompt-Format setting, the default setting for Login-Prompt is Login:.

Example: set login-prompt=Login Name:

Dependencies: If terminal services are disabled, Login-Prompt does not apply.

Location: Terminal-Server > Terminal-Mode-Configuration

Stinger Reference Guide 2-111

Stinger Profile and Parameter Reference
Login-Timeout

Login-Timeout
Description: Specifies the number of seconds a user can wait to log into the terminal server.
When a user attempts to log into the terminal server in terminal mode, a login prompt appears.
If the user does not proceed any further than the login prompt within the number of seconds
you specify, the login times out.

Usage: Specify a number of seconds from 0 to 300. The default is 300. If you set
Login-Timeout to 0 (zero), the login never times out.

Example: set terminal-mode-configuration login-timeout=60

Location: Terminal-Server > Terminal-Mode-Configuration

Usage: Specify Yes of No. The default is No.

Example: set log-software-version=yes

Location: Log

Loopback
Description: Specifies whether to run a loopback test on the interface. While the interface is
looped back, normal data traffic is interrupted.

Usage: Specify one of the following settings:

• No-Loopback (the default). The interface is operating normally.
• Facility-Loopback. During a facility loopback, the interface returns the signal it receives
on the line.
• Local-Loopback. During a local loopback, the interface’s receive path is connected to the
interface’s transmit path. The transmitted signal is still sent to the network as well.

Location: DS3-ATM {shelf-N trunk-module-N N} > Line-Config,

OC3-ATM {shelf-N trunk-module-N N} > Line-Config

2-112 Stinger Reference Guide

Stinger Profile and Parameter Reference
Loop-Timing

Loop-Timing
Description: Enables or disables deriving transmission timing from receiver inputs.

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that loop timing is enabled.
• No specifies that loop timing is disabled.

Example: set loop-timing=no

Location: OC3-ATM {shelf-N trunk-module-N N} > Line-Config

Location: OC3-ATM-Stat {shelf-N trunk-module-N N}

Location: DS3-ATM {shelf-N slot-N N}, OC3-ATM-Stat {shelf-N trunk-module-N N}

Stinger Reference Guide 2-113

Stinger Profile and Parameter Reference
M

M
MAC-Address
Description: Specifies the Media Access Control (MAC) address of an Ethernet interface. An
Ethernet MAC address is a 12-digit hexadecimal number denoting the physical address
encoded in the controller.

Usage: In most cases, the MAC-Address value is obtained from the system. However, you
can clone a profile by reading an existing one and changing its physical address.

Example: set mac-address=00:c0:6c:4e:ac:5a

Location: Ether-Info {shelf-N slot-N N}

Usage: The Magic-Key value is read only.

Location: ATMVCC-Stat circuit-name

To return to a higher context in the profile:

admin> list ..

Location: ATMPVC-Stat circuit-name

2-114 Stinger Reference Guide

Stinger Profile and Parameter Reference
Major-Firmware-Ver

Major-Firmware-Ver
Description: Indicates the major firmware version of the SDSL Line Interface Module (LIM).

Usage: The Major-Firmware-Ver setting is read only.

Location: SDSL-Stat {shelf-N slot-N N} > Physical-Status

Usage: Specify Yes or No. The default is No.

• Yes specifies that incoming traffic on the interface terminates in the system itself, and is
not forwarded on any other interface. In addition, only traffic generated by the system is
forwarded on the management-only interface. Traffic generated externally is dropped on
the interface.
• No specifies that the management-only feature is disabled.

Example: set management-only-interface=yes

Location: IP-Interface {shelf-N slot-N N}

Usage: Specify an integer. The default is any-slot.

Example: set manually-spared-slot-number=2

Dependencies: Manually-Spared-Slot-Number does not apply if Sparing-Mode=Inactive.

Location: LIM-Sparing-Config

Stinger Reference Guide 2-115

Stinger Profile and Parameter Reference
Margin-Config

Margin-Config
Description: A subprofile that enables you to configure noise-margin values.

Usage: With AL-DMT as the working profile, list the Margin-Config subprofile. For
example:
admin> read al-dmt {1 4 1}
AL-DMT/{ shelf-1 slot-4 1 } read
admin> list margin-config
[in AL-DMT/{ shelf-1 slot-4 1 }:margin-config]
target-noise-margin-up=6
target-noise-margin-down=6
min-noise-margin-up=0
min-noise-margin-down=0
max-add-noise-margin-up=31
max-add-noise-margin-down=31
ra-downshift-margin-up=0
ra-downshift-int-up=0
ra-downshift-margin-down=0
ra-downshift-int-down=0
ra-upshift-margin-up=0
ra-upshift-int-up=0
ra-upshift-margin-down=0
ra-upshift-int-down=0

You can then use the Set command to modify the settings in the subprofile. To close the
subprofile and return to a higher context in the working profile:
admin> list ..

Location: AL-DMT

Example: set max-add-noise-margin-down=15

Location: AL-DMT {shelf-N slot-N N} > Margin-Config

2-116 Stinger Reference Guide

Stinger Profile and Parameter Reference
Max-Add-Noise-Margin-Up

Max-Add-Noise-Margin-Up
Description: Specifies the maximum upstream noise margin beyond the
Target-Noise-Margin-Up value that the line will tolerate relative to 0 dB before attempting to
reduce power output.

Usage: Specify an integer from 1 to 31 dB. The default is 31. The modem software limits the
maximum noise margin to 15 dB. If you specify a setting greater than 15, the modem software
uses 15 dB.

Example: set max-add-noise-margin-up=15

Location: AL-DMT {shelf-N slot-N N} > Margin-Config

Usage: Specify an integer from 0 to 20 dBm. The default is 20.

Example: set max-aggr-power-level-down=13

Location: AL-DMT {shelf-N slot-N N} > Line-Config

Usage: Specify an integer from 0 to 13 dBm. The default is 13.

Example: set max-aggr-power-level-up=10

Location: AL-DMT {shelf-N slot-N N} > Line-Config

Usage: Specify an integer from 0 to 15000 kbps. The default is 8000.

Example: set max-bitrate-down=10000

Dependencies: Consider the following:

• Max-Bitrate-Down does not apply to operator-controlled rate-adaptation.
• If you set Max-Bitrate-Down to a nonzero value in the one subprofile, set
Max-Bitrate-Down to 0 (zero) in the other subprofile.

Stinger Reference Guide 2-117

Stinger Profile and Parameter Reference
Max-Bitrate-Up

Location: AL-DMT {shelf-N slot-N N} > Fast-Path-Config,

AL-DMT {shelf-N slot-N N} > Interleave-Path-Config

Usage: Specify an integer from 0 to 2000 kbps. The default is 1000.

Example: set max-bitrate-up=1200

Dependencies: Consider the following:

• Max-Bitrate-Up does not apply to operator-controlled rate-adaptation.
• If you set Max-Bitrate-Up to a nonzero value in one subprofile, set Max-Bitrate-Up to 0
(zero) in the other subprofile.

Location: AL-DMT {shelf-N slot-N N} > Fast-Path-Config,

AL-DMT {shelf-N slot-N N} > Interleave-Path-Config

Location: Answer-Defaults > Session-Info, Connection station > Session-Options

Usage: Specify a value from 0 to 255 in microseconds. The default is 16.

Example: set max-delay-down=10

Location: AL-DMT {shelf-N slot-N N} > Interleave-Path-Config

2-118 Stinger Reference Guide

Stinger Profile and Parameter Reference
Max-Delay-Up

Max-Delay-Up
Description: Specifies the maximum allowed upstream delay induced by interleaving data.

Usage: Specify a value from 0 to 255 in microseconds. The default is 16.

Example: set max-delay-up=10

Location: AL-DMT {shelf-N slot-N N} > Interleave-Path-Config

Usage: Specify a number from 34 to 52 in even-numbered increments. The default is 40. If

you specify an odd number, the system uses the even-numbered setting below it. The actual
value used is the negative value of the number you specify.

Example: set max-power-spectral-density=34

Location: AL-DMT {shelf-N slot-N N} > Line-Config

Example: set max-rate=528000

Location: SDSL {shelf-N slot-N N} > Line-Config

Stinger Reference Guide 2-119

Stinger Profile and Parameter Reference
Max-Source-Port

Example: set max-source-port=250

Dependencies: Rlogin must be enabled for Max-Source-Port to have any effect.

Location: Terminal-Server > Terminal-Mode-Configuration > Rlogin-Options

Usage: The Max-Upstream-Bandwidth value is read only.

Example: max-upstream-bandwidth=622160

Location: Bandwidth-Stats

2-120 Stinger Reference Guide

Stinger Profile and Parameter Reference
Metric

You can then use the Set command to modify the settings in the subprofile. To close the
subprofile and return to a higher context in the working profile:
admin> list ..

Location: Terminal-Server

Example: set metric=8

Location: IP-Route name

Usage: Specify an integer from 0 to 15000 kbps. The default is 50.

Example: set min-bitrate-down=100

Dependencies: Consider the following:

• When automatic rate-adaptive mode is in effect, the line initializes at the downstream rate
of Min-Bitrate-Down, or it does not initialize at all.
• Min-Bitrate-Down does not apply to operator-controlled rate-adaptation.
• If you set Min-Bitrate-Down to a nonzero value in one subprofile, set Min-Bitrate-Down
to 0 (zero) in the other subprofile.

Location: AL-DMT {shelf-N slot-N N} > Fast-Path-Config,

AL-DMT {shelf-N slot-N N} > Interleave-Path-Config

Stinger Reference Guide 2-121

Stinger Profile and Parameter Reference
Min-Bitrate-Up

Min-Bitrate-Up
Description: Specifies the minimum bit rate for upstream traffic.

Usage: Specify an integer from 0 to 2000 kbps. The default is 10.

Example: set min-bitrate-up=20

Dependencies: Consider the following:

• When automatic rate-adaptive mode is in effect, the line initializes at the upstream rate of
Min-Bitrate-Up, or it does not initialize at all.
• Min-Bitrate-Up does not apply to operator-controlled rate-adaptation.
• If you set Min-Bitrate-Up to a nonzero value in one subprofile, set Min-Bitrate-Up to 0
(zero) in the other subprofile.

Location: AL-DMT {shelf-N slot-N N} > Fast-Path-Config,

AL-DMT {shelf-N slot-N N} > Interleave-Path-Config

Example: set min-noise-margin-down=15

Location: AL-DMT {shelf-N slot-N N} > Margin-Config

Example: set min-noise-margin-up=15

Location: AL-DMT {shelf-N slot-N N} > Margin-Config

2-122 Stinger Reference Guide

Stinger Profile and Parameter Reference
Minor-Firmware-Ver

Minor-Firmware-Ver
Description: Indicates the minor firmware version of the SDSL Line Interface Module
(LIM).

Usage: The Minor-Firmware-Ver setting is read only.

Location: SDSL-Stat {shelf-N slot-N N} > Physical-Status

Example: set min-source-port=250

Dependencies: Rlogin must be enabled for Min-Source-Port to have any effect.

Location: Terminal-Server > Terminal-Mode-Configuration > Rlogin-Options

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Status

Stinger Reference Guide 2-123

Stinger Profile and Parameter Reference
Must-Agree

Must-Agree
Description: Specifies whether the controllers must agree on the choice of a primary Control
Module (CM).

Usage: Specify True or False. The default is False, which enables a CM to become primary
without the agreement of the other CM. The default setting is recommended.

Example: set must-agree=False

Location: Redundancy > Context > Context N

2-124 Stinger Reference Guide

Stinger Profile and Parameter Reference
N

N
Nailed-Group
Description: Specifies a nailed group number associated with a physical line, channel, or
interface.

Usage: Specify an integer from 0 to 1024. The default is 0 (zero). In the ATM-Options
subprofile, the Nailed-Group value specifies the nailed group number associated with the
physical interface used by the first side of the circuit. In the ATM-Connect-Options subprofile,
the Nailed-Group value specifies the nailed group number associated with the physical
interface used by the second side of the circuit.

Example: set nailed-group=7

Dependencies: Consider the following:

• Do not associate a group number with more than one active profile.
• Referring to the group number in the Nailed-Groups setting of a Connection profile causes
the connection to use the associated physical interface.
• The Nailed-Group value in the ATM-Options subprofile must match the Nailed-Groups
value in the Telco-Options subprofile.

Location: AL-DMT {shelf-N slot-N N} > Line Config

Connection > ATM-Options, Connection > ATM-Connect-Options,
DS3-ATM {shelf-N slot-N N} > Line-Config,
OC3-ATM {shelf-N trunk-module-N N} > Line-Config,
SDSL {shelf-N slot-N N} > Line-Config

Usage: Specify a number assigned to a group.

Example: set nailed-groups=1

Location: Connection station > Telco-Options

Stinger Reference Guide 2-125

Stinger Profile and Parameter Reference
Name

Name
Description: Assigns a name to a profile, user, route, host, slot card, or the Stinger system
itself.

Usage: Specify a descriptive name with no embedded spaces.

• For all profiles except the IP-Route, SDSL, and Trap profiles, you can specify up to 24
characters.
• For the IP-Route and Trap profiles, you can specify up to 31 characters.
• For the AL-DMT, OC3-ATM, and SDSL profiles, you can specify up to 16 characters.
• The default is null in all except User and OC3-ATM profiles. In a User profile, the default
is default. In an OC3-ATM profile, the default is the interface address in
shelf:slot:item format.

Example: set name=newyork

Dependencies: If the Stinger uses the specified value for authentication, it is case sensitive.

Location: Alarm name, AL-DMT {shelf-N slot-N N}, IP-Route name,

OC3-ATM {shelf-N trunk-module-N N}, SDSL {shelf-N slot-N N}, System, Trap host-name,
User name

Usage: The Near-End-CRC value is read only.

Example: near-end-crc=0

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Statistic

Usage: The Near-End-FEC value is read only.

Example: near-end-fec=0

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Statistic

2-126 Stinger Reference Guide

Stinger Profile and Parameter Reference
Near-End-HEC

Near-End-HEC
Description: Indicates the number of Header Error Checksum (HEC) errors detected by
COE’s ADSL Transceiver Unit (ATU).

Usage: The Near-End-HEC value is read only.

Example: near-end-hec=0

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Statistic

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the Stinger initiates a terminal-server login if Attribute 6 is not received,
regardless of whether Attribute 7 is received or not.
• No specifies that:
– If Attribute 6 is not received, but Attribute 7 is received, a framed-protocol login is
initiated.
– If neither Attribute 6 nor 7 is received, a terminal-server login is initiated.

Example: The following example instructs the Stinger to start a framed-protocol login if
Attribute 7 is received without Attribute 6:
admin> read external-auth
EXTERNAL-AUTH read
admin> set noattr6-use-termsrv=no
admin> write
EXTERNAL-AUTH written

Location: External-Auth

Stinger Reference Guide 2-127

Stinger Profile and Parameter Reference
Noise-Margin-Down

Noise-Margin-Down
Description: Indicates the current downstream noise margin in dB.

Usage: The Noise-Margin-Down value is read only.

Example: noise-margin-down=6

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Statistic

Usage: The Noise-Margin-Up value is read only.

Example: noise-margin-up=6

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Statistic

Usage: The Num-Sec-Invalid value is read only.

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Status

Usage: The Num-Sec-Valid value is read only.

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Status

2-128 Stinger Reference Guide

Stinger Profile and Parameter Reference
O

O
OC3-ATM
Description: A profile containing configuration settings for the OC3-ATM interface.

Usage: Use the Read and List commands to make OC3-ATM the working profile:
admin> read oc3-atm/{ shelf-1 trunk-module-2 1 }]
OC3-ATM read
admin> list
[in OC3-ATM/{ shelf-1 trunk-module-2 1 }]
name=1:18:1
physical-address*={ shelf-1 trunk-module-2 1 }
enabled=no
spare-physical-address={ any-shelf any-slot 0 }
sparing-enabled=yes
line-config={ 0 0 { any-shelf any-slot 0 } no-loopback STS-3c +

You can then use the Set command to modify the settings in the profile. To close the profile
and save your changes:
admin> write
OC3-ATM written

Stinger Reference Guide 2-129

Stinger Profile and Parameter Reference
Operational-Count

rlop-bip-error-count=0
rlop-febe-error-count=0
rpop-bip-error-count=0
rpop-febe-error-count=0
racp-chcs-error-count=0
racp-uchcs-error-count=12064
racp-rx-cell-count=32855
tacp-tx-cell-count=16
frequency-justification-count=0
HEC-cell-drop-counter=0
FIFO-overflow-counter=0
idle-cell-counter=0
valid-cell-counter=0
performance-monitoring={0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0}
interval-performance-monitoring=[ { 0 0 0 0 0 0 0 0 0 0 0 0 0 0+

Usage: The Operational-Count setting is read only.

Example: operational-count=10

Location: Device-Summary

Location: OC3-ATM-Stat {shelf-N trunk-module-N N}

2-130 Stinger Reference Guide

Stinger Profile and Parameter Reference
Out-Of-Frame

Out-Of-Frame
Description: Indicates whether the local line is up and in frame.

Usage: The Out-Of-Frame value is read only. True indicates that the line is down and out of
frame. False indicates that the line is up and in frame.

Example: out-of-frame=false

Location: OC3-ATM-Stat {shelf-N trunk-module-N N}

Usage: The Output-Power-Down value is read only.

Example: output-power-down=19

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Statistic

Usage: The Output-Power-Up value is read only.

Example: output-power-up=19

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Statistic

Stinger Reference Guide 2-131

Stinger Profile and Parameter Reference
P

P
Parallel-Dialing
Description: Specifies the number of call-setup requests the system sends to the network side
at any given time.

Usage: Specify an integer from 1 to 64. If the Stinger has trouble establishing an initial
connection at the full bandwidth for calls from the U.S. to another country, reduce
Parallel-Dialing to a value of 1. For ADSL or SDSL operation, you must set Parallel-Dialing to
the number of ADSL or SDSL interfaces. The default is 2.

Example: set parallel-dialing=12

Dependencies: If the system is processing the maximum number of calls when it receives a
new call request, it queues the request and processes it after the network side sends a
call-proceeding message for a previous request.

Location: System

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the remaining cells in a packet (except the last cell) should be discarded
if buffers become congested after some cells of a packet have been queued.
• No specifies that none of the remaining cells in a packet should be discarded if buffers
become congested after some cells of a packet have been queued.

Dependencies: If Encapsulation-Protocol is not set to ATM or ATM-Circuit,

Partial-Packet-Discard does not apply.

Location: ATM-QoS

Example: set password=mypw

Location: User name

2-132 Stinger Reference Guide

Stinger Profile and Parameter Reference
Password-Enabled

Password-Enabled
Description: Specifies whether all failed Telnet login attempts generate a trap.

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that all failed Telnet login attempts generate a trap.
• No specifies that all failed Telnet login attempts do not generate a trap.

Example: set password-enabled=no

Dependencies: When Password-Enabled=Yes, you must also set Security-Enabled=Yes for

all failed Telnet login attempts to generate a trap.

Location: Trap host-name

Usage: Specify up to 15 characters. The default is Password:

Example: set password-prompt=Your Password:

Dependencies: If terminal services are disabled, Password-Prompt does not apply.

Location: Terminal-Server > Terminal-Mode-Configuration

Usage: The Path-State value is read only.

Example: path-state=sonet-path-active-no-defect

Location: OC3-ATM-Stat {shelf-N trunk-module-N N}

Stinger Reference Guide 2-133

Stinger Profile and Parameter Reference
P-Bit-Error-Count

P-Bit-Error-Count
Description: Indicates the number of P-bit errors received since the last time the unit was
reset. P-bit errors indicate that the unit received a P-bit code on the DS3 M-frame that differs
from the locally calculated code.

Usage: The P-Bit-Error-Count value is read only.

Example: p-bit-error-count=0

Location: DS3-ATM-Stat {shelf-N slot-N N}

Usage: With OC3-ATM-Stat as the working profile, list the Performance-Monitoring

subprofile. For example:
admin> list
[in OC3-ATM-STAT/{ shelf-1 trunk-module-2 1 }:performance-monitoring]
sonet-section-errored-seconds=0
sonet-section-severely-errored-seconds=0
sonet-section-severely-errored-framing-seconds=0
sonet-section-coding-violations=0
sonet-line-errored-seconds=0
sonet-line-severely-errored-seconds=0
sonet-line-coding-violations=0
sonet-line-unavailable-seconds=0
sonet-far-end-line-errored-seconds=0
sonet-far-end-line-severely-errored-seconds=0
sonet-far-end-line-coding-violations=0
sonet-far-end-line-unavailable-seconds=0
sonet-path-errored-seconds=0
sonet-path-severely-errored-seconds=0
sonet-path-coding-violations=0
sonet-path-unavailable-seconds=0
sonet-far-end-path-errored-seconds=0
sonet-far-end-path-severely-errored-seconds=0
sonet-far-end-path-coding-violations=0
sonet-far-end-path-unavailable-seconds=0

You can then use the Set command to modify the settings in the subprofile. To close the
subprofile and return to a higher context in the working profile:
admin> list ..

Location: OC3-ATM-Stat {shelf-N trunk-module-N N}

2-134 Stinger Reference Guide

Stinger Profile and Parameter Reference
Perm-Conn-Upd-Mode

Usage: Specify one of the following values:

• All (the default) specifies that, if they are fetched from the RADIUS server, all existing
permanent connections will be torn down and reestablished following the update. This
setting causes service interruption every time any nailed profile is updated or added.
• Changed specifies that only changed permanent connections will be torn down and
reestablished.

Example: set perm-conn-upd-mode=changed

Location: System

Stinger Reference Guide 2-135

Stinger Profile and Parameter Reference
Physical-Address

Physical-Address
Description: Identifies the physical address of an interface.

Usage: The physical address has the format {shelf slot item}, where:

Syntax element Description

shelf Specifies the shelf in which the item resides. If you are using a
single-shelf system, the shelf number is always 1.
slot Specifies the number of the item’s expansion slot. Physical expansion slots
are numbered from 1 to 16, starting with 1 for the slot just below the shelf
controller. The slot value 17, controller, or c specifies the shelf con-
troller card. For example, to address the first slot on shelf 1:
{ 1 1 0 }
item Specifies an item on the slot card. Items are numbered starting with #1 for
the leftmost item on the card. An item number of 0 (zero) denotes the entire
slot. For example, to address line #48 on an SDSL card in slot #2 on shelf 1:
{ 1 2 48 }

In most cases, the value of Physical-Address is obtained from the system. However, you can
clone a profile by reading an existing one and changing its physical address. Use the List and
Set commands to modify the Physical-Address value. For example:
admin> list physical-address
[in SDSL/{ shelf-1 slot-1 1 }:physical-address]
shelf=shelf-1
slot=slot-9
item-number=37
admin> set shelf=shelf-2

As an alternative, you can just use the Set command. For example:
admin> set physical-address shelf=shelf-2
Location: Alarm name, AL-DMT {shelf-N slot-N N}, DS3-ATM {shelf-N slot-N N},
OC3-ATM {shelf-N trunk-module-N N}, OC3-ATM-Stat {shelf-N trunk-module-N N},
SDSL {shelf-N slot-N N}, SDSL-Stat {shelf-N slot-N N}
See Also: Device-Address, Interface-Address, Item-Number, Shelf, Slot

2-136 Stinger Reference Guide

Stinger Profile and Parameter Reference
Physical-Statistic

Physical-Statistic
Description: A subprofile that reports statistics about the RADSL or SDSL interface.
Usage: With AL-DMT-Stat or SDSL-Stat as the working profile, list the Physical-Statistic
subprofile. For example:
admin> list
[in SDSL-STAT { shelf-1 slot-1 0 }:physical-statistic]
line-up-timer={ 1 13 55 }
rx-signal-present=yes
line-quality=15
up-dwn-cntr=0
self-test=passed
far-end-db-attenuation=4
firmware-startup-stage=normal-operation
bert-timer=2 minutes
bert-enable=no
bert-operation-state=stopped
bert-error-counter=0
You can then use the Set command to modify the settings in the subprofile. To close the
subprofile and return to a higher context in the working profile:
admin> list ..
Location: AL-DMT-Stat {shelf-N slot-N N}, SDSL-Stat {shelf-N slot-N N}
See Also: Physical-Status

Physical-Status
Description: A subprofile that indicates the status of the RADSL or SDSL interface.

Usage: With AL-DMT-Stat or SDSL-Stat as the working profile, list the Physical-Status
subprofile. For example:

admin> list physical-status

[in SDSL-STAT { shelf-1 slot-1 0 }:physical-status ]
if-group-index=0
unit-type=coe
dev-line-state=port-up
up-stream-rate=784000
down-stream-rate=784000
major-firmware-ver=13
minor-firmware-ver=2
hardware-ver=2

You can then use the Set command to modify the settings in the subprofile. To close the
subprofile and return to a higher context in the working profile:
admin> list ..

Location: AL-DMT-Stat {shelf-N slot-N N}, SDSL-Stat {shelf-N slot-N N}

Stinger Reference Guide 2-137

Stinger Profile and Parameter Reference
Ping

Ping
Description: Enables and disables the terminal-server Ping command.

Usage: Specify Yes or No. The default is No.

• Yes enables terminal-server users to use the Ping command.
• No disables the Ping command in the terminal-server interface.

Example: set ping=yes

Location: Terminal-Server > Terminal-Mode-Configuration

Usage: Specify an integer from 0 to 15000 kbps. The default is 1000.

Example: set planned-bitrate-down=100

Dependencies: Consider the following:

• Planned-Bitrate-Down does not apply when automatic-at-startup rate adaptation is in use
on the line.
• If you set Planned-Bitrate-Down to a nonzero value in one subprofile, set
Planned-Bitrate-Down to 0 (zero) in the other subprofile.

Location: AL-DMT {shelf-N slot-N N} > Fast-Path-Config,

AL-DMT {shelf-N slot-N N} > Interleave-Path-Config

Usage: Specify an integer from 0 to 2000 kbps. The default is 200.

Example: set planned-bitrate-up=100

Dependencies: Consider the following:

• Planned-Bitrate-Up does not apply when automatic-at-startup rate adaptation is in use on
the line.
• If you set Planned-Bitrate-Up to a nonzero value in one subprofile, set Planned-Bitrate-Up
to 0 (zero) in the other subprofile.

Location: AL-DMT {shelf-N slot-N N} > Fast-Path-Config,

AL-DMT {shelf-N slot-N N} > Interleave-Path-Config

2-138 Stinger Reference Guide

Stinger Profile and Parameter Reference
Port

Port
Description: Specifies the port number, as follows:
• In the Terminal-Server profile, the Port setting specifies the port on the login host to which
the user connects in immediate mode.
• In a Log profile and Auxiliary-Syslog subprofile, the Port setting specifies the destination
port of the Syslog host.
• In a VCC-Members or VCC-Ident subprofile, the Port setting indicates the port number of
the slot card that owns the Virtual Channel Connection (VCC) on an Asynchronous
Transfer Mode (ATM) link.

Usage: Specify a port number. For a Terminal-Server profile, the default is 0 (zero). For the
Log profile, the default is 514. For a VCC-Members or VCC-Ident subprofile, the Port setting
is read only.

Dependencies: The Port value in the Log profile affects all data streams. The Port value in
each Auxiliary-Syslog subprofile affects the individual data stream directed to the device spec-
ified by the Host value, and overrides the value in the Log profile.

Location: ATMPVC-Stat circuit-name > VCC-Members > VCC-Members N,

ATMVCC-Stat circuit-name > VCC-Ident, Log,
Log > Auxiliary-Syslog > Auxiliary-Syslog N, Terminal-Server > Immediate-Mode-Options

Usage: Specify Yes or No. The default is No.

• Yes specifies that the Stinger sends trap-PDUs to the host specified by Host-Address.
• No specifies that the Stinger does not send trap-PDUs.

Example: set port-enabled=yes

Location: Trap host-name

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the system generates a trap when a power supply module is added or
removed.
• No specifies that the system does not generate a trap when a power supply module is
added or removed.

Stinger Reference Guide 2-139

Stinger Profile and Parameter Reference
Precedence

Example: set power-supply-enabled=no

Location: Trap host-name

Example: set precedence=001

Dependencies: For the Precedence setting to apply, you must set Active=Yes in the
TOS-Options subprofile.

Location: Connection station > IP-Options > TOS-Options

Example: set preference=100

Location: Connection station > IP-Options, IP-Route name

2-140 Stinger Reference Guide

Stinger Profile and Parameter Reference
Primary-IP-Address

Usage: Specify an IP address in dotted decimal notation. The default is null.

Example: set primary-ip-address=10.1.2.3

Dependencies: If Enabled=No in the SS7-Gateway profile, Primary-IP-Address does not

apply. In addition, for the ASG messaging interface to be enabled, you must set Enabled=Yes
and then specify valid values for Primary-IP-Address and Primary-TCP-Port.

Location: SS7-Gateway

Usage: Specify one of the following values:

• May-Be-Primary (the default) specifies that the CM is capable of being the primary CM.
• Must-Be-Primary specifies that the CM must be primary, but the flag indicating this
setting is cleared every time a primary is elected.
• Must-Always-Be-Primary specifies that if the current CM is up, it must always be the
primary CM.

Example: set primary-preference=must-always-be-primary

Location: Redundancy > Context > Context N

Usage: Specify Yes or No. The default is Yes.

Example: set primary-sdtn-empty-enabled=no

Location: Trap name

Stinger Reference Guide 2-141

Stinger Profile and Parameter Reference
Primary-TCP-Port

Primary-TCP-Port
Description: Specifies the primary TCP Port of the Access SS7 Gateway (ASG).

Usage: Specify a port number.

Example: set primary-tcp-port=5000

Dependencies: If Enabled=No in the SS7-Gateway profile, Primary-TCP-Port does not apply.

In addition, for the ASG messaging interface to be enabled, you must set Enabled=Yes and
then specify valid values for Primary-IP-Address and Primary-TCP-Port.

Location: SS7-Gateway

Usage: Specify Yes or No. The default is No.

• Yes makes the route private. The unit uses the route internally, but does not advertise it.
• No specifies that the unit advertises the route by means of routing protocols.

Example: set private-route=yes

Location: IP-Route name, Connection station > IP-Options

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the Stinger requires a configured profile for all callers. The unit rejects
calls for which it cannot find a configured profile.
• No specifies that if the Stinger cannot find a configured profile, it creates a temporary
profile for the caller.

Example: set profiles-required=no

Dependencies: You cannot set Profiles-Required for terminal-server calls.

Location: Answer-Defaults

2-142 Stinger Reference Guide

Stinger Profile and Parameter Reference
Prompt

Prompt
Description: Specifies a string that the Stinger uses as a command-line prompt.

Usage: Specify a string to be used as a prompt. You can specify up to 15 characters. In a User
profile, the default is an asterisk, which causes the Stinger to substitute the value of the
profile’s name upon successful login.

Example: set prompt=virginia>

Location: Terminal-Server > Terminal-Mode-Configuration, User name

Usage: Specify Yes or No. The default is No.

• Yes causes the Stinger to interpret carriage-return/linefeed and tab characters in the string
specified by Login-Prompt.
• No causes the Stinger to ignore carriage-return/linefeed or tab characters in the string
specified by Login-Prompt.

Example: set prompt-format=no

Dependencies: If terminal services are disabled, Prompt-Format does not apply.

Location: Terminal-Server > Terminal-Mode-Configuration

Stinger Reference Guide 2-143

Stinger Profile and Parameter Reference
PVC-Type

Usage: Specify one of the following values:

• Off (the default) specifies that the Stinger does not proxy any addresses.
• Active specifies that the Stinger responds to an ARP request with its own MAC address if
the request matches an active Connection profile over which the Stinger routes IP.
• Inactive specifies that the Stinger responds to an ARP request if the request matches the IP
address of any inactive Connection profile over which the Stinger routes IP.
• Always specifies that the Stinger responds to an ARP request with its own MAC address if
the request matches any IP address to which the Stinger has a route.

Example: set proxy-mode=inactive

Location: IP-Interface

Location: ATMPVC-Stat circuit-name

2-144 Stinger Reference Guide

Stinger Profile and Parameter Reference
Q

Q
QoS-Class
Description: Specifies the ATM service class for the QoS contract.

Usage: Specify one of the following values:

• CBR (Constant Bit Rate) is a service class for connections that depend on precise clocking
to ensure undistorted delivery of bits.
• VBR-RT (Variable Bit Rate-Real Time) is a service class that handles the packaging of
special delay-sensitive applications (such as packet video) that require low cell-delay
variation between endpoints.
• VBR-NRT (Variable Bit Rate Non-Real Time) is a service class that handles packaging
for the transfer of long, bursty data streams over a pre-established ATM connection.
• ABR (Available Bit Rate) is a service class that handles bursty LAN traffic, as well as data
that accepts delays and cell loss. It is a best-effort, managed service.
• UBR (Unspecified Bit Rate) is a service class that handles bursty LAN traffic, as well as
data that accepts delays and cell loss. It is a best-effort service that does not specify bit
rates or traffic values, and offers no QoS guarantees.

Dependencies: If Encapsulation-Protocol is not set to ATM or ATM-Circuit,

QoS-Class does not apply.

Location: ATM-QoS

QoS-Contract
Description: Specifies the Asynchronous Transfer Mode (ATM) Quality of Service (QoS)
contract for the connection.

Usage: Specify the contract indicated by the Contract-Name setting in the ATM-QoS profile.
The default is null.

Dependencies: If Encapsulation-Protocol is not set to ATM or ATM-Circuit, QoS-Contract

does not apply.

Location: Connection > ATM-Options, Connection > ATM-Connect-Options

Stinger Reference Guide 2-145

Stinger Profile and Parameter Reference
Queue-Depth

Queue-Depth
Description: Specifies the queue depth for SNMP requests.

Usage: Specify a number from 0 to 1024. The default is 0, which means that the Stinger does
not drop packets, no matter how far behind the SNMP subsystem gets. If the queue were to
grow too large in a heavily loaded environment, the system could run out of memory.

Location: SNMP

2-146 Stinger Reference Guide

Stinger Profile and Parameter Reference
R

R
R2-Signaling-Enabled
Description: Indicates whether R2 signaling is enabled.

Usage: The R2-Signaling-Enabled setting is read only. Yes indicates that R2 signaling is
enabled. No indicates that R2 signaling is not enabled.

Example: r2-signaling-enabled=no

Location: Base

Usage: The RACP-CHCS-Error-Count value is read only.

Example: RACP-CHCS-Error-Count=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N}

Usage: The RACP-RX-Cell-Count value is read only.

Example: RACP-RX-Cell-Count=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N}

Stinger Reference Guide 2-147

Stinger Profile and Parameter Reference
RACP-UCHCS-Error-Count

RACP-UCHCS-Error-Count
Description: Indicates the number of Receive ATM Cell Processor (RACP) Uncorrectable
Header Check Sequence (UCHCS) errors. The RACP delineates ATM cells and filters cells on
the basis of their idle status, their unassigned status, or HCS errors. It also descrambles the cell
payload.

Usage: The RACP-UCHCS-Error-Count value is read only.

Example: RACP-UCHCS-Error-Count=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N}

See Also: Acct-Drop-Stop-On-Auth-Fail, Acct-ID-Base, Acct-Key, Acct-Limit-Retry,

Acct-Port, Acct-RADIUS-Compat, Acct-Reset-Time, Acct-Server-N (N=1–3),
Acct-Sess-Interval, Acct-Src-Port, Acct-Stop-Only, Acct-Timeout

2-148 Stinger Reference Guide

Stinger Profile and Parameter Reference
Rad-Auth-Client

Rad-Auth-Client
Description: A subprofile that enables you to define how the Stinger interacts as a client to
RADIUS authentication servers.

Usage: With External-Auth as the working profile, list the Rad-Auth-Client subprofile. For
example:
admin> list rad-auth-client
[in EXTERNAL-AUTH:rad-auth-client]
auth-server-1=0.0.0.0
auth-server-2=0.0.0.0
auth-server-3=0.0.0.0
auth-port=0
auth-src-port=0
auth-key=""
auth-timeout=0
auth-rsp-required=no
auth-sess-interval=0
auth-ts-secure=yes
auth-reset-time=0
auth-Send67=yes
auth-frm-adr-start=no
auth-id-fail-return-busy=no
auth-id-timeout-return-busy=no
auth-radius-compat=old-ascend
auth-keep-user-name=change-name
auth-realm-delimiters="@/\%"
id-auth-prefix=""
allow-auth-config-rqsts=yes

You can then use the Set command to modify the settings in the subprofile. To close the
subprofile and return to a higher context in the working profile:
admin> list ..

Location: External-Auth

Stinger Reference Guide 2-149

Stinger Profile and Parameter Reference
Rad-ID-Source-Unique

Rad-ID-Source-Unique
Description: Specifies whether each RADIUS accounting request should be identified by the
UDP source port value, as well as by RADIUS ID, in order to extend the available number of
unique IDs for accounting requests.

RADIUS uses ID values in Request-Response matching. For each unique accounting request
(including retries, if a response is not received within the configured timeout period), RADIUS
assigns an 8-bit ID value. The assigned value is freed when the request is no longer
pending—that is, when RADIUS matches a request with a response, or the request times out.

When the Stinger runs at high capacity, RADIUS can run out of unique IDs. By default, when
the server reaches its limit of 256 outstanding requests, no unique values are available for the
next accounting request. To overcome this limitation, you can specify that each request be
identified by the UDP source port as well as by the RADIUS ID value.

Usage: Specify one of the following values:

• System-Unique (the default) specifies that the Stinger uses only the RADIUS ID in
Request-Response matching.
• Port-Unique specifies that the Stinger uses the source UDP port number as well as the
RADIUS ID in Request-Response matching.

Example: set rad-id-source-unique=port-unique

Location: External-Auth

Usage: Specify one of the following values:

• Unified (the default) specifies that the Stinger uses a single sequence space for the
RADIUS ID number.
• Distinct specifies that RADIUS authentication and accounting packets do not share the
same ID sequence space. The Stinger can send a total of 256 authentication packets before
the authentication ID sequence rolls over, and 256 accounting packets before the
accounting ID sequence rolls over. Three sequence spaces are allocated: one for the
Unified sequence space, one for the authentication ID sequence, and one for the
accounting ID sequence.

Example: set rad-id-space=distinct

2-150 Stinger Reference Guide

Stinger Profile and Parameter Reference
RADIUS-Change-Enabled

Dependencies: When you configure the Stinger to use distinct ID sequence spaces, the
RADIUS server must perform additional checks for duplicate detection. The server should
check the RADIUS ID value as well as the service type and destination UDP port in each
packet.

Location: External-Auth

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the system generates a trap when a new RADIUS server is being
accessed.
• No specifies that the system does not generate a trap when a new RADIUS server is being
accessed.

Example: set radius-change-enabled=no

Location: Trap host-name

Usage: Specify a value from 1 to 255.

Example: set ra-downshift-int-down=15

Location: AL-DMT {shelf-N slot-N N} > Margin-Config

Stinger Reference Guide 2-151

Stinger Profile and Parameter Reference
RA-Downshift-Int-Up

RA-Downshift-Int-Up
Note: This value is not currently used.
Description: Specifies the number of seconds that the downshift noise margin can be
maintained before the line reduces its upstream bit rate.

Usage: Specify a value from 1 to 255.

Example: set ra-downshift-int-up=15

Location: AL-DMT {shelf-N slot-N N} > Margin-Config

Usage: Specify a value from 1 to 31 dB.

Example: set ra-downshift-margin-down=15

Location: AL-DMT {shelf-N slot-N N} > Margin-Config

Usage: Specify a value from 1 to 31 dB.

Example: set ra-downshift-margin-up=15

Location: AL-DMT {shelf-N slot-N N} > Margin-Config

2-152 Stinger Reference Guide

Stinger Profile and Parameter Reference
RARP-Enabled

RARP-Enabled
Description: Enables the Stinger to use the Reverse Address Resolution Protocol (RARP) to
obtain its IP address from a RARP server.

Usage: Specify Yes or No. The default is No.

• Yes enables the Stinger to use RARP to obtain its IP address from a RARP server.
• No disables the unit’s ability to use RARP.

Example: set rarp-enabled=yes

Location: IP-Global

Usage: Specify one of the following values:

• Automatic-At-Startup (the default) specifies that the downstream rate is selected at
startup. If you accept the Automatic-At-Startup default, the Customer Premises
Equipment (CPE) initializes at a minimum specified bit rate and target noise margin.
If the CPE fails to achieve the minimum bit rate in either direction, it cannot initialize, and
sends a message that the requested bit rate was too high. If the CPE can support a higher
bit rate than the specified minimum, it can train up to a higher rate within the acceptable
noise margin. Each direction can specify a different minimum and maximum bit rate using
the fast or interleaved ADSL channel.
• Operator-Controlled specifies that the line trains downstream using a constant planned bit
rate. The Customer Premises Equipment (CPE) must initialize at and maintain a specific
bit rate with an acceptable target noise margin.
If the CPE fails to achieve the planned bit rate in either direction, it fails to initialize. The
CPE does not use a higher bit rate, even if it can support one.

Location: AL-DMT {shelf-N slot-N N} > Line-Config

Stinger Reference Guide 2-153

Stinger Profile and Parameter Reference
Rate-Adapt-Mode-Up

Rate-Adapt-Mode-Up
Description: Specifies the rate-adaptive mode for upstream training.

Usage: Specify one of the following values:

• Automatic-At-Startup (the default) specifies that the upstream rate is selected at startup. If
you accept the Automatic-At-Startup default, the Customer Premises Equipment (CPE)
initializes at a minimum specified bit rate and target noise margin.
If the CPE fails to achieve the minimum bit rate in either direction, it cannot initialize, and
sends a message that the requested bit rate was too high. If the CPE can support a higher
bit rate than the specified minimum, it can train up to a higher rate within the acceptable
noise margin. Each direction can specify a different minimum and maximum bit rate using
the fast or interleaved ADSL channel.
• Operator-Controlled specifies that the line trains upstream using a constant planned bit
rate. The Customer Premises Equipment (CPE) must initialize at and maintain a specific
bit rate with an acceptable target noise margin.
If the CPE fails to achieve the planned bit rate in either direction, it fails to initialize. The
CPE does not use a higher bit rate, even if it can support one.

Location: AL-DMT {shelf-N slot-N N} > Line-Config

Usage: Specify a value from 1 to 255.

Example: set ra-upshift-int-down=15

Location: AL-DMT {shelf-N slot-N N} > Margin-Config

Usage: Specify a value from 1 to 255.

Example: set ra-upshift-int-up=15

Location: AL-DMT {shelf-N slot-N N} > Margin-Config

2-154 Stinger Reference Guide

Stinger Profile and Parameter Reference
RA-Upshift-Margin-Down

RA-Upshift-Margin-Down
Note: This value is not currently used.
Description: Specifies the downstream noise margin relative to 0 dB. If the noise level
remains at this level for more than the specified time interval, the line increases its downstream
bit rate.

Usage: Specify a value from 1 to 31 dB.

Example: set ra-upshift-margin-down=15

Location: AL-DMT {shelf-N slot-N N} > Margin-Config

Usage: Specify a value from 1 to 31 dB.

Example: set ra-upshift-margin-up=15

Location: AL-DMT {shelf-N slot-N N} > Margin-Config

Stinger Reference Guide 2-155

Stinger Profile and Parameter Reference
Read-Community

Dependencies: You must set Enforce-Address-Security=Yes for Read-Access-Hosts to have

any effect.

Location: SNMP

Example: set read-community=mycomm

Location: SNMP

Example: set read-write-community=secret

Location: SNMP

Usage: Specify Yes or No. The default is No.

Example: set read-write-enabled=yes

Location: SNMP

2-156 Stinger Reference Guide

Stinger Profile and Parameter Reference
Redundancy

Redundancy
Description: A profile containing configuration settings for redundant Control Modules
(CMs).

Usage: Use the Read and List commands to make Redundancy the working profile and list its
contents. For example:
admin> read redundancy
REDUNDANCY read
admin> list
[in REDUNDANCY]
context=[ { initial no-function no-mandate no-function +
system-ip-addr=0.0.0.0
first-controller-default-route={ "" 0.0.0.0/0 0.0.0.0 8 60 no +
second-controller-default-route={ "" 0.0.0.0/0 0.0.0.0 8 60 +

You can then use the Set command to modify the settings in the profile. To close the profile
and save your changes:
admin> write
REDUNDANCY written

Example: set remote-address=10.77.156.4/24

Location: Connection station > IP-Options

Usage: Specify Yes or No. The default is No.

• Yes enables the Stinger to retrieve the login banner and list of Telnet hosts from RADIUS.
• No specifies that you must specify the banner and list of Telnet hosts in a local
Terminal-Server profile.

Example: set remote-configuration=no

Dependencies: If terminal services are disabled or RADIUS is not in use,

Remote-Configuration does not apply.

Stinger Reference Guide 2-157

Stinger Profile and Parameter Reference
Reqd-State

Location: Terminal-Server > Menu-Mode-Options

Usage: In a Device-State profile, specify one of the following values:

• Down-Reqd-State requires the device to be in a nonoperational state.
• Up-Reqd-State requires the device to be in normal operations mode.

In a Slot-State profile, specify one of the following values:

• Reqd-State-Down requires the slot to be in a nonoperational state.
• Reqd-State-Up requires the slot to be in normal operations mode.

Example: set reqd-state=down-req-state

Dependencies: You can also set Reqd-State by using the Device or Slot command. In a
Slot-State profile, setting Reqd-State=Down-Reqd-State does not persist across system resets.

Location: Device-State {{shelf-N slot-N N} N}, Slot-State {shelf-N slot-N N}

Usage: Specify one of the following settings:

2-158 Stinger Reference Guide

Stinger Profile and Parameter Reference
RIP-Mode

Setting Description
Routing-Send-Only-V2 The Stinger sends RIP-v2 routing updates, but ignores
any it receives for the connection.
Routing-Recv-Only-V2 The Stinger does not send RIP-v2 routing updates, but
accepts any routing updates it receives for the connec-
tion.
Routing-Send-And-Recv-V2 The Stinger both sends RIP-v2 routing updates and
accepts any it receives for the connection.

Example: set rip=routing-send-only-v2

Dependencies: If the Stinger does not route IP for the connection, or if IP routing is globally
disabled, RIP does not apply.

Location: Connection station > IP-Options

Usage: Specify one of the following settings:

Setting Description
Routing-Off (the default) The Stinger does not send routing updates, and ignores
any routing updates it receives for the connection.
Routing-Send-Only The Stinger sends RIP-v1 routing updates, but ignores
any it receives for the connection.
Routing-Recv-Only The Stinger does not send RIP-v1 routing updates, but
accepts any routing updates it receives for the connec-
tion.
Routing-Send-And-Recv The Stinger both sends RIP-v1 routing updates and
accepts any it receives for the connection.
Routing-Send-Only-V2 The Stinger sends RIP-v2 routing updates, but ignores
any it receives for the connection.
Routing-Recv-Only-V2 The Stinger does not send RIP-v2 routing updates, but
accepts any routing updates it receives for the connec-
tion.
Routing-Send-And-Recv-V2 The Stinger both sends RIP-v2 routing updates and
accepts any it receives for the connection.

Stinger Reference Guide 2-159

Stinger Profile and Parameter Reference
RIP-Policy

Example: set rip-mode=routing-send-only-v2

Location: IP-Interface {{shelf-N slot-N N} N}

Usage: Specify one of the following values:

• Poison-Rvrs (the default) specifies that the Stinger propagates routes back to the subnet
from which they were received, but with a metric of 16 (infinite metric).
• Split-Horzn specifies that the Stinger does not propagate routes back to the subnet from
which they were received.

Example: set rip-policy=split-horzn

Location: IP-Global

Example: set rip-pref=50

Location: IP-Global

2-160 Stinger Reference Guide

Stinger Profile and Parameter Reference
RIP-Queue-Depth

RIP-Queue-Depth
Description: Specifies the queue depth for RIP packets.

Usage: Specify a number between 0 and 1024. The default is 0 (zero), which means that the
Stinger does not drop the packets, no matter what the state of the routing subsystem or system
memory.

Example: set rip-queue-depth=128

Location: IP-Global

Usage: Specify a 32-bit hexadecimal number. The default is c8:00:00:00.

Example: set rip-tag=cfc80000

Location: IP-Global

Rlogin-Options
Description: A subprofile containing options for configuring Rlogin connections.

Usage: With Terminal-Mode-Configuration subprofile as the working profile, list the

Rlogin-Options subprofile. For example:
admin> list rlogin-options
[in TERMINAL-SERVER:terminal-mode-configuration:rlogin-options]
rlogin=no
max-source-port=1023
min-source-port=128

You can then use the Set command to modify the settings in the subprofile. To close the
subprofile and return to a higher context in the working profile:
admin> list ..

Location: Terminal-Server > Terminal-Mode-Configuration

Stinger Reference Guide 2-161

Stinger Profile and Parameter Reference
RLOP-BIP-Error-Count

RLOP-BIP-Error-Count
Description: Indicates the number of Receive Line Overhead Processor (RLOP) Bit
Interleaved Parity (BIP)-8 errors. The RLOP is responsible for line-level alarms and
performance monitoring.

Usage: The RLOP-BIP-Error-Count value is read only.

Example: RLOP-BIP-Error-Count=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N}

Usage: The RLOP-FEBE-Error-Count value is read only.

Example: RLOP-FEBE-Error-Count=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N}

Usage: Specify an integer from 1 to 15. The default is 7.

Example: set routing-metric=1

Location: Answer-Defaults > IP-Answer, Connection station > IP-Options

Usage: The RPOP-BIP-Error-Count value is read only.

Example: RPOP-BIP-Error-Count=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N}

2-162 Stinger Reference Guide

Stinger Profile and Parameter Reference
RPOP-FEBE-Error-Count

RPOP-FEBE-Error-Count
Description: Indicates the number of Receive Path Overhead Processor (RPOP) Far End
Block Errors (FEBEs).

Usage: The RPOP-FEBE-Error-Count value is read only.

Example: RPOP-FEBE-Error-Count=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N}

Usage: The RSOP-BIP-Error-Count value is read only.

Example: RSOP-BIP-Error-Count=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N}

Usage: Specify Yes or No. The default is No.

• Yes disables descrambling of the 48-byte ATM cell payload in received cells.
• No enables descrambling of the 48-byte ATM cell payload in received cells.

Example: set rx-cell-payload-descramble-disabled=yes

Dependencies: Set RX-Cell-Payload-Descramble-Disabled to Yes only if the transmitting

switch has disabled the corresponding scramble function.

Location: OC3-ATM {shelf-N trunk-module-N N} > Line Config

Stinger Reference Guide 2-163

Stinger Profile and Parameter Reference
RX-Data-Rate-Limit

RX-Data-Rate-Limit
Description: Specifies the maximum data rate (in kbits per second) to be received across the
connection. You can use this setting to limit bandwidth for a connection according to the rate
charged for the account.

Usage: Specify a number from 0 to 64000. The default is 0 (zero), which disables the data-rate
limit feature. If the value you specify is larger than the actual bandwidth provided by the line,
the connection behaves as though the data rate limit were disabled, except that additional
computations are performed unnecessarily.

Example: set rx-data-rate-limit=32000

Dependencies: The system activates configurable receive data-rate limits only for
connections that use SDSL and unchannelized DS3 cards. If you specify a value for a
connection that does not use these cards, the system ignores the settings.

Location: Connection > Session-Options

Usage: Specify Yes or No. The default is No.

• Yes disables descrambling of the entire ATM receive stream.
• No enables descrambling of the entire ATM receive stream.

Example: set rx-descramble-disabled=yes

Dependencies: Set RX-Descramble-Disabled to Yes only if the transmitting switch has

disabled the corresponding scramble function.

Location: OC3-ATM {shelf-N trunk-module-N N} > Line Config

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Statistic,

SDSL-Stat {shelf-N slot-N N} > Physical-Statistic

2-164 Stinger Reference Guide

Stinger Profile and Parameter Reference
S

S
Save-Level
Description: Indicates the lowest level of log messages the Stinger displays in the log status
window.

Usage: Specify one of the following settings:

Setting Lowest-level message indicates

None (the default) The Stinger does not display log messages.
Emergency The unit has an error condition and is unlikely to be operating normally.
Alert The unit has an error condition but is still operating normally.
Critical An interface has gone down or a security error has occurred.
Error An error event has occurred.
Warning An unusual event has occurred, but the unit is otherwise operating nor-
mally. For example, this type of message appears when a login attempt
has failed because the user entered an incorrect user name or password.
Notice Events of interest in normal operation have occurred (a link going up or
down, for example).
Info State and status changes that are commonly not of general interest have
occurred.
Debug Helpful debugging information.

Example: set save-level=error

Dependencies: Log levels are also configurable on a per-user basis in User profiles.

Location: Log

Usage: Specify an integer. The default is 100.

Example: set save-number=150

Location: Log

Stinger Reference Guide 2-165

Stinger Profile and Parameter Reference
Screen-Length

Screen-Length
Description: Specifies the number of lines displayed in the command-line window. (For the
values to take effect, the user must log in again.)

Usage: Specify a number between 24 and 999. The default is 24 lines.

Example: set screen-length=68

Location: User

Usage: Specify one of the following settings:

Location: Load-Select

2-166 Stinger Reference Guide

Stinger Profile and Parameter Reference
SDSL-Stat

You can then use the Set command to modify the settings in the profile. To close the profile
and save your changes:
admin> write
SDSL/{ shelf-1 slot-1 0 } written

Usage: Specify a secondary domain name. The default is null.

Example: set sec-domain-name=xyz.com

Location: IP-Global

Usage: Specify Yes or No. The default is Yes.

Example: set secondary-sdtn-empty-enabled=no

Location: Trap name

Stinger Reference Guide 2-167

Stinger Profile and Parameter Reference
Secondary-IP-Address

Secondary-IP-Address
Description: Specifies the secondary IP address of the Access SS7 Gateway (ASG).

Usage: Specify an IP address in dotted decimal notation. The default is null.

Example: set secondary-ip-address=10.1.2.3

Dependencies: If Enabled=No in the SS7-Gateway profile, Secondary-IP-Address does not

apply.

Location: SS7-Gateway

Usage: Specify a port number.

Example: set secondary-tcp-port=5000

Dependencies: If Enabled=No in the SS7-Gateway profile, Secondary-TCP-Port does not

apply.

Location: SS7-Gateway

Usage: The Section-State value is read only.

Example: section-state=sonet-section-active-no-defect

Location: OC3-ATM-Stat {shelf-N trunk-module-N N}

2-168 Stinger Reference Guide

Stinger Profile and Parameter Reference
Security-Enabled

Security-Enabled
Description: Specifies whether the Stinger traps security events and sends a traps-PDU to the
SNMP manager. Security events notify users of security problems and track access to the unit.
(For the most up-to-date information about security events, see the Ascend Enterprise MIB.)
The Stinger traps the following security events:

Event Indication
authenticationFailure The Stinger sending the trap is the addressee of a protocol message
(RFC-1215 trap-type 4) that is not properly authenticated.
consoleStateChange The console associated with the passed console index has changed
(Lucent trap-type 12) state. To read the console’s state, get ConsoleEntry from the Ascend
Enterprise MIB.
maxTelnetAttempts There have been three consecutive failed attempts to log into the
(Lucent trap-type 15) Stinger via Telnet.

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the Stinger sends security-event traps to the host specified by
Host-Address.
• No specifies that the Stinger does not send security-event traps.

Example: set security-enabled=yes

Location: Trap host-name

Usage: Specify one of the following values:

• None (the default) specifies that a user name and password are not required for
terminal-server access.
• Partial specifies that a user name, password, or both are required in command mode, but
not in menu mode. If an interactive user toggles between menu mode and command mode,
a password and user name are required only upon entry to command mode.
• Full specifies that a user name, password, or both are required in order to enter the
terminal server in both command mode and menu mode.

Example: set security-mode=full

Location: Terminal-Server

Stinger Reference Guide 2-169

Stinger Profile and Parameter Reference
Selectools-Enabled

Selectools-Enabled
Description: Indicates whether Selectools are enabled.

Usage: The Selectools-Enabled setting is read only. Yes indicates that Selectools are enabled.
No indicates that Selectools are disabled.

Example: selectools-enabled=yes

Location: Base

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Statistic,

SDSL-Stat {shelf-N slot-N N} > Physical-Statistic

2-170 Stinger Reference Guide

Stinger Profile and Parameter Reference
Serial-Number

Serial-Number
Description: Displays the unit’s serial number.

Usage: The Serial-Number setting is read only.

Example: serial-number=6201732

Location: Base, Slot-Info {shelf-N slot-N N}

Usage: Specify one of the following values:

• None (the default) specifies no immediate service.
• Telnet specifies immediate Telnet service.
• Raw-TCP specifies an immediate TCP connection.
• Rlogin specifies immediate Rlogin service.

Example: set service=rlogin

Dependencies: If terminal services are disabled, Service does not apply.

Location: Terminal-Server > Immediate-Mode-Options

Location: Connection > Session-Options

Stinger Reference Guide 2-171

Stinger Profile and Parameter Reference
Ses-Rate-Type

Ses-Rate-Type
Description: Specifies the per-session modem type for rate control.

Usage: Specify one of the following settings:

• Disabled (the default) specifies that modem rate control is not active for the connection.
• SDSL specifies SDSL modem rate control.

Location: Connection > Session-Options

Usage: Specify one of the following values:

144000
272000
400000
528000
784000
1168000
1552000

Location: Connection > Session-Options

2-172 Stinger Reference Guide

Stinger Profile and Parameter Reference
Session-Info

Location: Connection station

Stinger Reference Guide 2-173

Stinger Profile and Parameter Reference
Shelf

Usage: For a Device-Address or Physical-Address setting, specify an integer from 1 to 6. In

an Error profile, the Shelf setting is read only.

Example: set shelf=1

Location: Device-Address, Error, Physical-Address

Usage: Specify Yes or No. The default is No.

• Yes specifies that the Stinger suppresses status messages upon establishment of an
interactive terminal-server connection.
• No specifies that the Stinger sends all status messages upon establishment of an
interactive terminal-server connection.

Example: set silent-mode=yes

Dependencies: If terminal services are disabled, Silent-Mode does not apply.

Location: Terminal-Server > Terminal-Mode-Configuration

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the Stinger answers and routes one call before answering and routing
the next call.
• No specifies that the Stinger answers and routes an incoming call immediately.

Example: set single-file-incoming=yes

Location: System

2-174 Stinger Reference Guide

Stinger Profile and Parameter Reference
SLIP

SLIP
Description: Enables or disables the use of the terminal-server SLIP command.

Usage: Specify Yes or No. The default is No.

• Yes enables a user to begin SLIP sessions from the terminal-server interface.
• No disables a user from beginning SLIP from the terminal-server interface.

Example: set slip=yes

Dependencies: If terminal services are disabled, SLIP does not apply.

Location: Terminal-Server > SLIP-Mode-Configuration

Usage: Specify Yes or No. The default is No.

• Yes enables the Stinger to respond to a BOOTP request from the calling unit during a
SLIP session.
• No disables BOOTP for a SLIP session. The user is prompted to accept an IP address at
the start of the SLIP session.

Example: set slip-bootp=yes

Dependencies: If terminal services are disabled, SLIP-BOOTP does not apply.

Location: Terminal-Server > SLIP-Mode-Configuration

Usage: With Terminal-Server as the working profile, list the SLIP-Mode-Configuration

subprofile. For example:
admin> list slip-mode-configuration
[in TERMINAL-SERVER:slip-mode-configuration]
slip=no
slip-bootp=no

You can then use the Set command to modify the settings in the subprofile. To close the
subprofile and return to a higher context in the working profile:
admin> list ..

Location: Terminal-Server

Stinger Reference Guide 2-175

Stinger Profile and Parameter Reference
Slot

Slot
Description: Specifies the number of the item’s expansion slot. Physical expansion slots are
numbered from 1 to 16, starting with 1 for the slot just below the shelf controller. The slot
value 17, controller, or c specifies the shelf controller card.

Usage: For a Device-Address or Physical-Address setting, specify an integer from 1 to 17. In

an Error profile, the Slot setting is read only.

Example: set slot=10

Location: Device-Address, Error, Physical-Address

Location: Slot-Info {shelf-N slot-N N}, Slot-State {shelf-N slot-N N},

Slot-Type {shelf-N slot-N N}

2-176 Stinger Reference Guide

Stinger Profile and Parameter Reference
Slot-Info

Slot-Info
Description: A profile that displays the software version, serial number, and other system
information about the Stinger.

Usage: The Slot-Info profile is read only. Use the Get command to display its contents. For
example:
admin> get slot-info
[in SLOT-INFO]
slot-address={ shelf-1 slot-7 0 }
serial-number=77777777
software-version=1
software-revision=2
software-level=E
software-release=""
hardware-level=0
hardware-rework-count=0

Location: ATMPVC-Stat circuit-name > VCC-Members > VCC Members N,

ATMVCC-Stat circuit-name > VCC-Ident

Stinger Reference Guide 2-177

Stinger Profile and Parameter Reference
Slot-Profile-Change-Enabled

Slot-Profile-Change-Enabled
Description: Specifies whether the system generates a trap when a Slot-State profile is
created due to slot insertion, or the current-state transitions into Oper-State-Down,
Oper-State-Up, Oper-State-Dump, or Oper-State-None.

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the system generates a trap.
• No specifies that the system does not generate a trap.

Example: set slot-profile-change-enabled=no

Location: Trap host-name

2-178 Stinger Reference Guide

Stinger Profile and Parameter Reference
Slot-Type

Slot-Type
Description: Specifies the type of device in the slot. If the actual type of device discerned by
the system at startup differs from the type specified by Slot-Type, the Stinger assumes that you
have changed slot cards. It then deletes the old SNMP interface numbers.

Usage: Specify one of the following values:

Value Specifies
None No card is installed.
Unknown The software does not recognize the card.
Shelf-Controller Stinger shelf controller.
Router-Card Standalone router card.
4Ether-Card Four-interface Ethernet card.
SDSL-Card SDSL card
UDS3-Card Single interface unchannelized DS3 card
DS3-ATM-Card Single interface DS3 ATM card
OC3-ATM-Card Single interface OC3 ATM card
Al-DMTADSL-ATM-Card Alcatel DMT ADSL ATM card

Dependencies: You can also display the slot type for a particular device by using the
terminal-server Show command.

Location: Admin-State-Phys-If {shelf-N slot-N N}, Slot-Type {shelf-N slot-N N}

Stinger Reference Guide 2-179

Stinger Profile and Parameter Reference
Slot-VPI-VCI-Range

Slot-VPI-VCI-Range
Description: A subprofile that enables you to set a VPI/VCI range.

Usage: With ATM-Config as the working profile, use the List command to display the
Slot-VPI-VCI-Range subprofile. For example:
admin> list slot-vpi-vci-range
[in ATM-CONFIG:slot-vpi-vci-range]
slot-vpi-vci-range[1] = vpi-0-15-vci-32-127
slot-vpi-vci-range[2] = vpi-0-15-vci-32-127
slot-vpi-vci-range[3] = vpi-0-15-vci-32-127
slot-vpi-vci-range[4] = vpi-0-15-vci-32-127
slot-vpi-vci-range[5] = vpi-0-15-vci-32-127
slot-vpi-vci-range[6] = vpi-0-15-vci-32-127
slot-vpi-vci-range[7] = vpi-0-15-vci-32-127
slot-vpi-vci-range[8] = ( bad value )
slot-vpi-vci-range[9] = ( bad value )
slot-vpi-vci-range[10] = vpi-0-15-vci-32-127
slot-vpi-vci-range[11] = vpi-0-15-vci-32-127
slot-vpi-vci-range[12] = vpi-0-15-vci-32-127
slot-vpi-vci-range[13] = vpi-0-15-vci-32-127
slot-vpi-vci-range[14] = vpi-0-15-vci-32-127
slot-vpi-vci-range[15] = vpi-0-15-vci-32-127
slot-vpi-vci-range[16] = vpi-0-15-vci-32-127

To close the Slot-VPI-VCI-Range subprofile and return to a higher context in the profile:
admin> list ..

Location: ATM-Config

Setting # of VPI bits # of VCI bits

VPI-0-3-VCI-32-511 2 9
VPI-0-7-VCI-32-255 3 8
VPI-0-15-VCI-32-127 4 7
VPI-0-31-VCI-32-63 5 6

Example: set slot-vpi-vci-range=vpi-0-31-vci-32-63

2-180 Stinger Reference Guide

Stinger Profile and Parameter Reference
SNMP

Dependencies: The range you specify is shared by all ports of the LIM. Be very careful when
changing this value. In order to make the new range effective, the system drops all connections
involving any of the ports of the LIM.

Location: ATM-Config > Slot-VPI-VCI-Range

Stinger Reference Guide 2-181

Stinger Profile and Parameter Reference
SNMP-Interface

SNMP-Interface
Description: Indicates the SNMP interface number assigned to the device by the system.

Usage: The SNMP-Interface setting is read only.

Example: snmp-interface=65

Dependencies: At system startup, the Stinger reads the Admin-State-Perm-If and

Admin-State-Phys-If profiles. If the addressed device is not present in the system and has been
replaced by a device of another type, the Stinger deletes the profile associated with the device.
The next time the system is reset or power cycled, the old device’s SNMP interface number is
made available for reassignment. Removing a slot card and leaving the slot empty, however,
does not free up interface numbers. If you reinstall the slot card, the Stinger reassigns the same
interface number. In addition, removing a slot card and replacing it with a slot card of another
type does not immediately free up the old interface numbers. New numbers are assigned to the
new slot card, and the old numbers become available at the next power cycle or system reset.

Location: Admin-State-Perm-If station, Admin-State-Phys-If {shelf-N slot-N N}

Usage: The Software-Level setting is read only.

Example: software-level=H

Location: Base, Slot-Info {shelf-N slot-N N}

Usage: The Software-Release setting is read only.

Example: software-release=7.0

Location: Slot-Info {shelf-N slot-N N}

2-182 Stinger Reference Guide

Stinger Profile and Parameter Reference
Software-Revision

Software-Revision
Description: Indicates the software revision number of the unit.

Usage: The Software-Revision setting is read only.

Example: software-revision=1

Location: Base, Slot-Info {shelf-N slot-N N}

Usage: The Software-Version setting is read only.

Example: software-version=1.0

Dependencies: You can also use the Version command to view the current system software
version.

Location: Base, Slot-Info {shelf-N slot-N N}

Usage: The SONET-Far-End-Line-Coding-Violations value is read only.

Example: sonet-far-end-line-coding-violations=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N} > Performance-Monitoring

OC3-ATM-Stat {shelf-N trunk-module-N N} > Interval-Performance-Monitoring

Stinger Reference Guide 2-183

Stinger Profile and Parameter Reference
SONET-Far-End-Line-Errored-Seconds

SONET-Far-End-Line-Errored-Seconds
Description: Indicates the number of errored seconds at the far-end device’s Line layer. A
SONET line is one or more sections.

Usage: The SONET-Far-End-Line-Errored-Seconds value is read only.

Example: sonet-far-end-line-errored-seconds=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N} > Performance-Monitoring

OC3-ATM-Stat {shelf-N trunk-module-N N} > Interval-Performance-Monitoring

See Also: SONET-Far-End-Line-Coding-Violations,

SONET-Far-End-Line-Severely-Errored-Seconds
Description: Indicates the number of severely errored seconds at the far-end device’s Line
layer. A SONET line is one or more sections.

Usage: The SONET-Far-End-Line-Severely-Errored-Seconds value is read only.

Example: sonet-far-end-line-severely-errored-seconds=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N} > Performance-Monitoring

OC3-ATM-Stat {shelf-N trunk-module-N N} > Interval-Performance-Monitoring

See Also: SONET-Far-End-Line-Coding-Violations,

SONET-Far-End-Line-Errored-Seconds, SONET-Far-End-Line-Unavailable-Seconds,
SONET-Far-End-Path-Coding-Violations, SONET-Far-End-Path-Errored-Seconds,
SONET-Far-End-Path-Severely-Errored-Seconds,
SONET-Far-End-Path-Unavailable-Seconds, SONET-Line-Coding-Violations,
SONET-Line-Errored-Seconds, SONET-Line-Severely-Errored-Seconds,
SONET-Line-Unavailable-Seconds, SONET-Path-Coding-Violations,
SONET-Path-Errored-Seconds, SONET-Path-Severely-Errored-Seconds,
SONET-Path-Unavailable-Seconds, SONET-Section-Coding-Violations,
SONET-Section-Errored-Seconds, SONET-Section-Severely-Errored-Framing-Seconds,
SONET-Section-Severely-Errored-Seconds

2-184 Stinger Reference Guide

Stinger Profile and Parameter Reference
SONET-Far-End-Line-Unavailable-Seconds

SONET-Far-End-Line-Unavailable-Seconds
Description: Indicates the number of unavailable seconds at the far-end device’s Line layer.
A SONET line is one or more sections.

Usage: The SONET-Far-End-Line-Unavailable-Seconds value is read only.

Example: sonet-far-end-line-unavailable-seconds=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N} > Performance-Monitoring

OC3-ATM-Stat {shelf-N trunk-module-N N} > Interval-Performance-Monitoring

See Also: SONET-Far-End-Line-Coding-Violations,

SONET-Far-End-Line-Errored-Seconds, SONET-Far-End-Line-Severely-Errored-Seconds,
SONET-Far-End-Path-Coding-Violations, SONET-Far-End-Path-Errored-Seconds,
SONET-Far-End-Path-Severely-Errored-Seconds,
SONET-Far-End-Path-Unavailable-Seconds, SONET-Line-Coding-Violations,
SONET-Line-Errored-Seconds, SONET-Line-Severely-Errored-Seconds,
SONET-Line-Unavailable-Seconds, SONET-Path-Coding-Violations,
SONET-Path-Errored-Seconds, SONET-Path-Severely-Errored-Seconds,
SONET-Path-Unavailable-Seconds, SONET-Section-Coding-Violations,
SONET-Section-Errored-Seconds, SONET-Section-Severely-Errored-Framing-Seconds,
SONET-Section-Severely-Errored-Seconds

SONET-Far-End-Path-Coding-Violations
Description: Indicates the number of bit-interleaved parity errors at the far-end device’s Path
layer. A path is an end-to-end circuit.

Usage: The SONET-Far-End-Path-Coding-Violations value is read only.

Example: sonet-far-end-path-coding-violations=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N} > Performance-Monitoring

OC3-ATM-Stat {shelf-N trunk-module-N N} > Interval-Performance-Monitoring

See Also: SONET-Far-End-Line-Coding-Violations,

SONET-Far-End-Line-Errored-Seconds, SONET-Far-End-Line-Severely-Errored-Seconds,
SONET-Far-End-Line-Unavailable-Seconds, SONET-Far-End-Path-Errored-Seconds,
SONET-Far-End-Path-Severely-Errored-Seconds,
SONET-Far-End-Path-Unavailable-Seconds, SONET-Line-Coding-Violations,
SONET-Line-Errored-Seconds, SONET-Line-Severely-Errored-Seconds,
SONET-Line-Unavailable-Seconds, SONET-Path-Coding-Violations,
SONET-Path-Errored-Seconds, SONET-Path-Severely-Errored-Seconds,
SONET-Path-Unavailable-Seconds, SONET-Section-Coding-Violations,
SONET-Section-Errored-Seconds, SONET-Section-Severely-Errored-Framing-Seconds,
SONET-Section-Severely-Errored-Seconds

Stinger Reference Guide 2-185

Stinger Profile and Parameter Reference
SONET-Far-End-Path-Errored-Seconds

SONET-Far-End-Path-Errored-Seconds
Description: Indicates the number of errored seconds at the far-end device’s Path layer. A
path is an end-to-end circuit.

Usage: The SONET-Far-End-Path-Errored-Seconds value is read only.

Example: sonet-far-end-path-errored-seconds=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N} > Performance-Monitoring

OC3-ATM-Stat {shelf-N trunk-module-N N} > Interval-Performance-Monitoring

See Also: SONET-Far-End-Line-Coding-Violations,

SONET-Far-End-Line-Errored-Seconds, SONET-Far-End-Line-Severely-Errored-Seconds,
SONET-Far-End-Line-Unavailable-Seconds, SONET-Far-End-Path-Coding-Violations,
SONET-Far-End-Path-Severely-Errored-Seconds,
SONET-Far-End-Path-Unavailable-Seconds, SONET-Line-Coding-Violations,
SONET-Line-Errored-Seconds, SONET-Line-Severely-Errored-Seconds,
SONET-Line-Unavailable-Seconds, SONET-Path-Coding-Violations,
SONET-Path-Errored-Seconds, SONET-Path-Severely-Errored-Seconds,
SONET-Path-Unavailable-Seconds, SONET-Section-Coding-Violations,
SONET-Section-Errored-Seconds, SONET-Section-Severely-Errored-Framing-Seconds,
SONET-Section-Severely-Errored-Seconds

SONET-Far-End-Path-Severely-Errored-Seconds
Description: Indicates the number of severely errored seconds at the far-end device’s Path
layer. A path is an end-to-end circuit.

Usage: The SONET-Far-End-Path-Severely-Errored-Seconds value is read only.

Example: sonet-far-end-path-severely-errored-seconds=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N} > Performance-Monitoring

OC3-ATM-Stat {shelf-N trunk-module-N N} > Interval-Performance-Monitoring

See Also: SONET-Far-End-Line-Coding-Violations,

SONET-Far-End-Line-Errored-Seconds, SONET-Far-End-Line-Severely-Errored-Seconds,
SONET-Far-End-Line-Unavailable-Seconds, SONET-Far-End-Path-Coding-Violations,
SONET-Far-End-Path-Errored-Seconds, SONET-Far-End-Path-Unavailable-Seconds,
SONET-Line-Coding-Violations, SONET-Line-Errored-Seconds,
SONET-Line-Severely-Errored-Seconds, SONET-Line-Unavailable-Seconds,
SONET-Path-Coding-Violations, SONET-Path-Errored-Seconds,
SONET-Path-Severely-Errored-Seconds, SONET-Path-Unavailable-Seconds,
SONET-Section-Coding-Violations, SONET-Section-Errored-Seconds,
SONET-Section-Severely-Errored-Framing-Seconds,
SONET-Section-Severely-Errored-Seconds

2-186 Stinger Reference Guide

Stinger Profile and Parameter Reference
SONET-Far-End-Path-Unavailable-Seconds

SONET-Far-End-Path-Unavailable-Seconds
Description: Indicates the number of unavailable seconds at the far-end device’s Path layer.
A path is an end-to-end circuit.

Usage: The SONET-Far-End-Path-Unavailable-Seconds value is read only.

Example: sonet-far-end-path-unavailable-seconds=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N} > Performance-Monitoring

OC3-ATM-Stat {shelf-N trunk-module-N N} > Interval-Performance-Monitoring

See Also: SONET-Far-End-Line-Coding-Violations,

SONET-Far-End-Line-Errored-Seconds, SONET-Far-End-Line-Severely-Errored-Seconds,
SONET-Far-End-Line-Unavailable-Seconds, SONET-Far-End-Path-Coding-Violations,
SONET-Far-End-Path-Errored-Seconds, SONET-Far-End-Path-Severely-Errored-Seconds,
SONET-Line-Coding-Violations, SONET-Line-Errored-Seconds,
SONET-Line-Severely-Errored-Seconds, SONET-Line-Unavailable-Seconds,
SONET-Path-Coding-Violations, SONET-Path-Errored-Seconds,
SONET-Path-Severely-Errored-Seconds, SONET-Path-Unavailable-Seconds,
SONET-Section-Coding-Violations, SONET-Section-Errored-Seconds,
SONET-Section-Severely-Errored-Framing-Seconds,
SONET-Section-Severely-Errored-Seconds

SONET-Line-Coding-Violations
Description: Indicates the number of bit-interleaved parity errors at the unit’s Line layer. A
SONET line is one or more sections.

Usage: The SONET-Line-Coding-Violations value is read only.

Example: sonet-line-coding-violations=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N} > Performance-Monitoring

OC3-ATM-Stat {shelf-N trunk-module-N N} > Interval-Performance-Monitoring

See Also: SONET-Far-End-Line-Coding-Violations,

SONET-Far-End-Line-Errored-Seconds, SONET-Far-End-Line-Severely-Errored-Seconds,
SONET-Far-End-Line-Unavailable-Seconds, SONET-Far-End-Path-Coding-Violations,
SONET-Far-End-Path-Errored-Seconds, SONET-Far-End-Path-Severely-Errored-Seconds,
SONET-Far-End-Path-Unavailable-Seconds, SONET-Line-Errored-Seconds,
SONET-Line-Severely-Errored-Seconds, SONET-Line-Unavailable-Seconds,
SONET-Path-Coding-Violations, SONET-Path-Errored-Seconds,
SONET-Path-Severely-Errored-Seconds, SONET-Path-Unavailable-Seconds,
SONET-Section-Coding-Violations, SONET-Section-Errored-Seconds,
SONET-Section-Severely-Errored-Framing-Seconds,
SONET-Section-Severely-Errored-Seconds

Stinger Reference Guide 2-187

Stinger Profile and Parameter Reference
SONET-Line-Errored-Seconds

SONET-Line-Errored-Seconds
Description: Indicates the number of errored seconds at the unit’s Line layer. A SONET line
is one or more sections.

Usage: The SONET-Line-Errored-Seconds value is read only.

Example: sonet-line-errored-seconds=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N} > Performance-Monitoring

OC3-ATM-Stat {shelf-N trunk-module-N N} > Interval-Performance-Monitoring

See Also: SONET-Far-End-Line-Coding-Violations,

SONET-Far-End-Line-Errored-Seconds, SONET-Far-End-Line-Severely-Errored-Seconds,
SONET-Far-End-Line-Unavailable-Seconds, SONET-Far-End-Path-Coding-Violations,
SONET-Far-End-Path-Errored-Seconds, SONET-Far-End-Path-Severely-Errored-Seconds,
SONET-Far-End-Path-Unavailable-Seconds, SONET-Line-Coding-Violations,
SONET-Line-Severely-Errored-Seconds, SONET-Line-Unavailable-Seconds,
SONET-Path-Coding-Violations, SONET-Path-Errored-Seconds,
SONET-Path-Severely-Errored-Seconds, SONET-Path-Unavailable-Seconds,
SONET-Section-Coding-Violations, SONET-Section-Errored-Seconds,
SONET-Section-Severely-Errored-Framing-Seconds,
SONET-Section-Severely-Errored-Seconds

SONET-Line-Severely-Errored-Seconds
Description: Indicates the number of severely errored seconds at the unit’s Line layer. A
SONET line is one or more sections.

Usage: The SONET-Line-Severely-Errored-Seconds value is read only.

Example: sonet-line-severely-errored-seconds=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N} > Performance-Monitoring

OC3-ATM-Stat {shelf-N trunk-module-N N} > Interval-Performance-Monitoring

See Also: SONET-Far-End-Line-Coding-Violations,

SONET-Far-End-Line-Errored-Seconds, SONET-Far-End-Line-Severely-Errored-Seconds,
SONET-Far-End-Line-Unavailable-Seconds, SONET-Far-End-Path-Coding-Violations,
SONET-Far-End-Path-Errored-Seconds, SONET-Far-End-Path-Severely-Errored-Seconds,
SONET-Far-End-Path-Unavailable-Seconds, SONET-Line-Coding-Violations,
SONET-Line-Errored-Seconds, SONET-Line-Unavailable-Seconds,
SONET-Path-Coding-Violations, SONET-Path-Errored-Seconds,
SONET-Path-Severely-Errored-Seconds, SONET-Path-Unavailable-Seconds,
SONET-Section-Coding-Violations, SONET-Section-Errored-Seconds,
SONET-Section-Severely-Errored-Framing-Seconds,
SONET-Section-Severely-Errored-Seconds

2-188 Stinger Reference Guide

Stinger Profile and Parameter Reference
SONET-Line-Unavailable-Seconds

SONET-Line-Unavailable-Seconds
Description: Indicates the number of unavailable seconds at the unit’s Line layer. A SONET
line is one or more sections.

Usage: The SONET-Line-Unavailable-Seconds value is read only.

Example: sonet-line-unavailable-seconds=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N} > Performance-Monitoring

OC3-ATM-Stat {shelf-N trunk-module-N N} > Interval-Performance-Monitoring

See Also: SONET-Far-End-Line-Coding-Violations,

SONET-Far-End-Line-Errored-Seconds, SONET-Far-End-Line-Severely-Errored-Seconds,
SONET-Far-End-Line-Unavailable-Seconds, SONET-Far-End-Path-Coding-Violations,
SONET-Far-End-Path-Errored-Seconds, SONET-Far-End-Path-Severely-Errored-Seconds,
SONET-Far-End-Path-Unavailable-Seconds, SONET-Line-Coding-Violations,
SONET-Line-Errored-Seconds, SONET-Line-Severely-Errored-Seconds,
SONET-Path-Coding-Violations, SONET-Path-Errored-Seconds,
SONET-Path-Severely-Errored-Seconds, SONET-Path-Unavailable-Seconds,
SONET-Section-Coding-Violations, SONET-Section-Errored-Seconds,
SONET-Section-Severely-Errored-Framing-Seconds,
SONET-Section-Severely-Errored-Seconds

SONET-Path-Coding-Violations
Description: Indicates the number of bit-interleaved parity errors at the unit’s Path layer. A
path is an end-to-end circuit.

Usage: The SONET-Path-Coding-Violations value is read only.

Example: sonet-path-coding-violations=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N} > Performance-Monitoring

OC3-ATM-Stat {shelf-N trunk-module-N N} > Interval-Performance-Monitoring

See Also: SONET-Far-End-Line-Coding-Violations,

SONET-Far-End-Line-Errored-Seconds, SONET-Far-End-Line-Severely-Errored-Seconds,
SONET-Far-End-Line-Unavailable-Seconds, SONET-Far-End-Path-Coding-Violations,
SONET-Far-End-Path-Errored-Seconds, SONET-Far-End-Path-Severely-Errored-Seconds,
SONET-Far-End-Path-Unavailable-Seconds, SONET-Line-Coding-Violations,
SONET-Line-Errored-Seconds, SONET-Line-Severely-Errored-Seconds,
SONET-Line-Unavailable-Seconds, SONET-Path-Errored-Seconds,
SONET-Path-Severely-Errored-Seconds, SONET-Path-Unavailable-Seconds,
SONET-Section-Coding-Violations, SONET-Section-Errored-Seconds,
SONET-Section-Severely-Errored-Framing-Seconds,
SONET-Section-Severely-Errored-Seconds

Stinger Reference Guide 2-189

Stinger Profile and Parameter Reference
SONET-Path-Errored-Seconds

SONET-Path-Errored-Seconds
Description: Indicates the number of errored seconds at the unit’s Path layer. A path is an
end-to-end circuit.

Usage: The SONET-Path-Errored-Seconds value is read only.

Example: sonet-path-errored-seconds=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N} > Performance-Monitoring

OC3-ATM-Stat {shelf-N trunk-module-N N} > Interval-Performance-Monitoring

See Also: SONET-Far-End-Line-Coding-Violations,

SONET-Far-End-Line-Errored-Seconds, SONET-Far-End-Line-Severely-Errored-Seconds,
SONET-Far-End-Line-Unavailable-Seconds, SONET-Far-End-Path-Coding-Violations,
SONET-Far-End-Path-Errored-Seconds, SONET-Far-End-Path-Severely-Errored-Seconds,
SONET-Far-End-Path-Unavailable-Seconds, SONET-Line-Coding-Violations,
SONET-Line-Errored-Seconds, SONET-Line-Severely-Errored-Seconds,
SONET-Line-Unavailable-Seconds, SONET-Path-Coding-Violations,
SONET-Path-Severely-Errored-Seconds, SONET-Path-Unavailable-Seconds,
SONET-Section-Coding-Violations, SONET-Section-Errored-Seconds,
SONET-Section-Severely-Errored-Framing-Seconds,
SONET-Section-Severely-Errored-Seconds

SONET-Path-Severely-Errored-Seconds
Description: Indicates the number of severely errored seconds at the unit’s Path layer. A path
is an end-to-end circuit.

Usage: The SONET-Path-Severely-Errored-Seconds value is read only.

Example: sonet-path-severely-errored-seconds=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N} > Performance-Monitoring

OC3-ATM-Stat {shelf-N trunk-module-N N} > Interval-Performance-Monitoring

See Also: SONET-Far-End-Line-Coding-Violations,

SONET-Far-End-Line-Errored-Seconds, SONET-Far-End-Line-Severely-Errored-Seconds,
SONET-Far-End-Line-Unavailable-Seconds, SONET-Far-End-Path-Coding-Violations,
SONET-Far-End-Path-Errored-Seconds, SONET-Far-End-Path-Severely-Errored-Seconds,
SONET-Far-End-Path-Unavailable-Seconds, SONET-Line-Coding-Violations,
SONET-Line-Errored-Seconds, SONET-Line-Severely-Errored-Seconds,
SONET-Line-Unavailable-Seconds, SONET-Path-Coding-Violations,
SONET-Path-Errored-Seconds, SONET-Path-Unavailable-Seconds,
SONET-Section-Coding-Violations, SONET-Section-Errored-Seconds,
SONET-Section-Severely-Errored-Framing-Seconds,
SONET-Section-Severely-Errored-Seconds

2-190 Stinger Reference Guide

Stinger Profile and Parameter Reference
SONET-Path-Unavailable-Seconds

SONET-Path-Unavailable-Seconds
Description: Indicates the number of unavailable seconds at the unit’s Path layer. A path is an
end-to-end circuit.

Usage: The SONET-Path-Unavailable-Seconds value is read only.

Example: sonet-path-unavailable-seconds=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N} > Performance-Monitoring

OC3-ATM-Stat {shelf-N trunk-module-N N} > Interval-Performance-Monitoring

See Also: SONET-Far-End-Line-Coding-Violations,

SONET-Far-End-Line-Errored-Seconds, SONET-Far-End-Line-Severely-Errored-Seconds,
SONET-Far-End-Line-Unavailable-Seconds, SONET-Far-End-Path-Coding-Violations,
SONET-Far-End-Path-Errored-Seconds, SONET-Far-End-Path-Severely-Errored-Seconds,
SONET-Far-End-Path-Unavailable-Seconds, SONET-Line-Coding-Violations,
SONET-Line-Errored-Seconds, SONET-Line-Severely-Errored-Seconds,
SONET-Line-Unavailable-Seconds, SONET-Path-Coding-Violations,
SONET-Path-Errored-Seconds, SONET-Path-Severely-Errored-Seconds,
SONET-Section-Coding-Violations, SONET-Section-Errored-Seconds,
SONET-Section-Severely-Errored-Framing-Seconds,
SONET-Section-Severely-Errored-Seconds

SONET-Section-Coding-Violations
Description: Indicates the number of bit-interleaved parity errors at the unit’s Section layer.
A SONET section is a single run of cable. Section-terminating equipment is any adjacent pair
of switches.

Usage: The SONET-Section-Coding-Violations value is read only.

Example: sonet-section-coding-violations=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N} > Performance-Monitoring

OC3-ATM-Stat {shelf-N trunk-module-N N} > Interval-Performance-Monitoring

See Also: SONET-Far-End-Line-Coding-Violations,

SONET-Far-End-Line-Errored-Seconds, SONET-Far-End-Line-Severely-Errored-Seconds,
SONET-Far-End-Line-Unavailable-Seconds, SONET-Far-End-Path-Coding-Violations,
SONET-Far-End-Path-Errored-Seconds, SONET-Far-End-Path-Severely-Errored-Seconds,
SONET-Far-End-Path-Unavailable-Seconds, SONET-Line-Coding-Violations,
SONET-Line-Errored-Seconds, SONET-Line-Severely-Errored-Seconds,
SONET-Line-Unavailable-Seconds, SONET-Path-Coding-Violations,
SONET-Path-Errored-Seconds, SONET-Path-Severely-Errored-Seconds,
SONET-Path-Unavailable-Seconds, SONET-Section-Errored-Seconds,
SONET-Section-Severely-Errored-Framing-Seconds,
SONET-Section-Severely-Errored-Seconds

Stinger Reference Guide 2-191

Stinger Profile and Parameter Reference
SONET-Section-Errored-Seconds

SONET-Section-Errored-Seconds
Description: Indicates the number of errored seconds at the unit’s Section layer. A SONET
section is a single run of cable. Section-terminating equipment is any adjacent pair of switches.

Usage: The SONET-Section-Errored-Seconds value is read only.

Example: sonet-section-errored-seconds=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N} > Performance-Monitoring

OC3-ATM-Stat {shelf-N trunk-module-N N} > Interval-Performance-Monitoring

See Also: SONET-Far-End-Line-Coding-Violations,

SONET-Far-End-Line-Errored-Seconds, SONET-Far-End-Line-Severely-Errored-Seconds,
SONET-Far-End-Line-Unavailable-Seconds, SONET-Far-End-Path-Coding-Violations,
SONET-Far-End-Path-Errored-Seconds, SONET-Far-End-Path-Severely-Errored-Seconds,
SONET-Far-End-Path-Unavailable-Seconds, SONET-Line-Coding-Violations,
SONET-Line-Errored-Seconds, SONET-Line-Severely-Errored-Seconds,
SONET-Line-Unavailable-Seconds, SONET-Path-Coding-Violations,
SONET-Path-Errored-Seconds, SONET-Path-Severely-Errored-Seconds,
SONET-Path-Unavailable-Seconds, SONET-Section-Coding-Violations,
SONET-Section-Severely-Errored-Framing-Seconds,
SONET-Section-Severely-Errored-Seconds

SONET-Section-Severely-Errored-Framing-Seconds
Description: Indicates the number of severely errored framing seconds at the unit’s Section
layer. A SONET section is a single run of cable. Section-terminating equipment is any adjacent
pair of switches.

Usage: The SONET-Section-Severely-Errored-Framing-Seconds value is read only.

Example: sonet-section-severely-errored-framing-seconds=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N} > Performance-Monitoring

OC3-ATM-Stat {shelf-N trunk-module-N N} > Interval-Performance-Monitoring

2-192 Stinger Reference Guide

Stinger Profile and Parameter Reference
SONET-Section-Severely-Errored-Seconds

SONET-Section-Severely-Errored-Seconds
Description: Indicates the number of severely errored seconds at the unit’s Section layer. A
SONET section is a single run of cable. Section-terminating equipment is any adjacent pair of
switches.

Usage: The SONET-Section-Severely-Errored-Seconds value is read only.

Example: sonet-section-severely-errored-seconds=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N} > Performance-Monitoring

OC3-ATM-Stat {shelf-N trunk-module-N N} > Interval-Performance-Monitoring

See Also: SONET-Far-End-Line-Coding-Violations,

Source-IP-Check
Description: Enables or disables anti-spoofing for the session.

Usage: Specify Yes or No. The default is No.

• Yes specifies that the system checks all packets received on the interface to ensure that
their source IP address matches the combination of address and subnet mask specified by
the Remote-Address value, or the address agreed upon in IPCP negotiation. If
Remote-Address specifies a subnet, packets that originate on that subnet are accepted. If
Remote-Address specifies a 32-bit mask, only packets from that host are accepted.
Packets sent from an address that does not match are discarded.
• No disables anti-spoofing for the session.

Example: set source-ip-check=yes

Location: Connection station > IP-Options

Stinger Reference Guide 2-193

Stinger Profile and Parameter Reference
Spared-Slot-Number

Spared-Slot-Number
Description: Specifies the primary Line Interface Module (LIM) associated with the spare
specified by Spare-Slot-Number.

Usage: The Spared-Slot-Number value is read only.

Example: spared-slot-number=2

Location: LIM-Sparing-Status

In the OC3-ATM-Stat profile, the Spare-Physical-Address value is read only.

Dependencies: Sparing-State must be set to Yes for Spare-Physical-Address to apply.

Location: DS3-ATM {shelf-N slot-N N} > Line-Config,

OC3-ATM {shelf-N trunk-module-N N}, OC3-ATM-Stat {shelf-N trunk-module-N N}

2-194 Stinger Reference Guide

Stinger Profile and Parameter Reference
Spare-Slot-Number

Spare-Slot-Number
Description: Specifies the slot number designated as the spare Line Interface Module (LIM).

Usage: In the LIM-Sparing-Config profile, specify an integer. The default is any-slot. The
slot you specify must have a special backup LIM. In the LIM-Sparing-Status profile, the
Spare-Slot-Number value is read only.

Example: set spare-slot-number=1

Dependencies: Spare-Slot-Number does not apply if Sparing-Mode=Inactive.

Location: LIM-Sparing-Config, LIM-Sparing-Status

Usage: Specify one of the following values:

• Manual enables sparing.
• Inactive (the default) disables sparing.

Example: set sparing-mode=manual

Location: DS3-ATM {shelf-N slot-N N} > Line-Config, LIM-Sparing-Config,

LIM-Sparing-Status

Usage: In an OC3-ATM profile, specify Yes or No. The default is Yes.

• Yes enables the sparing function for the port.
• No disables the sparing function for the port.

In the OC3-ATM-Stat profile, the Sparing-State value is read only.

Example: set sparing-state=no

Location: OC3-ATM {shelf-N trunk-module-N N},

OC3-ATM-Stat {shelf-N trunk-module-N N}

Stinger Reference Guide 2-195

Stinger Profile and Parameter Reference
SS7-Gateway

SS7-Gateway
Description: A profile that contains settings for configuring the Access SS7 Gateway (ASG)
interface.

Usage: Use the Read and List commands to make SS7-Gateway the working profile and list
its contents. For example:
admin> read ss7-gateway
SS7-GATEWAY read
admin> list
[in SS7-GATEWAY]
enabled=yes
primary-ip-address=200.168.8.130
primary-tcp-port=5000
secondary-ip-address=0.0.0.0
secondary-tcp-port=2000
bay-id=""
system-type=IASC1B
device-id=0

You can then use the Set command to modify the settings in the profile. To close the profile
and save your changes:
admin> write
SS7-GATEWAY written

Dependencies: The Bay-ID and System-Type settings do not apply to configuring the ASG
interface.

Usage: The Stack-Trace setting is read only. It consists of an array of 6 elements.

Example: stack-trace=[ 000000 ]

Location: Error

2-196 Stinger Reference Guide

Stinger Profile and Parameter Reference
Standby-Upstream-Bandwidth-On-Trunks

Standby-Upstream-Bandwidth-On-Trunks
Note: This value is not currently used.
Description: Indicates the total bandwidth of all standby trunks.

Usage: The Standby-Upstream-Bandwidth-On-Trunks value is read only.

Example: standby-upstream-bandwidth-on-trunks=466620

Location: Bandwidth-Stats

Usage: Specify Yes or No. The default is No.

• Yes specifies that the terminal server starts user logins in menu mode.
• No specifies that the terminal server starts user logins in command mode.

Example: set start-with-menus=yes

Dependencies: If terminal services are disabled, Start-With-Menus does not apply.

Location: Terminal-Server > Menu-Mode-Options

Example: set static-pref=50

Location: IP-Global

Stinger Reference Guide 2-197

Stinger Profile and Parameter Reference
Station

Station
Description: In a Connection profile, specifies the name of the CPE or remote device on the
inbound side of the circuit. In the Admin-State-Perm-If profile, specifies the name of a
nailed-up connection indicated by a Connection profile or RADIUS user profile.

Usage: In a Connection profile, specify the name of the remote station. You can enter up to 31
characters. The value you specify is case sensitive, and must exactly match the name of the
remote device. If you are not sure about the exact name, contact the administrator of the remote
network. The default is null. In the Admin-State-Perm-If profile, the Station setting is read
only.

Example: set station=robin-gw

Dependencies: The name you specify for Station is not necessarily a DNS hostname. The
Stinger does not use the Station name to obtain an IP address.

Location: Admin-State-Perm-If, Connection

Usage: Specify a number from 18 to 993. The default is 18 lines.

Example: set status-length=60

Dependencies: Status-Length must be less than Screen-Length by at least six lines.

Location: User

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the Stinger summarizes RIP-v1 subnet information.
• No specifies that the Stinger advertises each route as it appears in the routing table.

Example: set summarize-rip-routes=no

2-198 Stinger Reference Guide

Stinger Profile and Parameter Reference
Suppress-Host-Routes

Dependencies: The Summarize-RIP-Routes setting is not applicable if RIP-v2 is in use or if

RIP is turned off.

Location: IP-Global

Usage: Specify Yes or No. The default is No.

• Yes specifies that host routes are suppressed.
• No specifies that host routes are advertised.

Example: The following set of commands configures the Stinger to suppress host routes:
admin> read ip-global
IP-GLOBAL read
admin> set suppress-host-routes=yes
admin> write
IP-GLOBAL written

Dependencies: If you set Suppress-Host-Routes to Yes, routes are suppressed according to

the following rules:
• If a Connection profile specifies a Remote-Address setting with a subnet mask of less than
32 bits, host routes for the interface are suppressed while the session is being negotiated.
After the session is established, only network routes are advertised for the interface.
• If a Connection profile specifies a Remote-Address setting with a subnet mask of /32, host
routes for the interface are not suppressed.

Location: IP-Global

Suspect-Access-Resource-Enabled
Description: Specifies whether the suspect-access-resource trap is enabled.

Usage: Specify Yes or No. The default is Yes.

Example: set suspect-access-resource-enabled=no

Location: Trap name

Stinger Reference Guide 2-199

Stinger Profile and Parameter Reference
Switched-Enabled

Switched-Enabled
Description: Indicates whether the unit can make switched calls.

Usage: The Switched-Enabled setting is read only. Yes indicates that the unit can make
switched calls. No indicates that the unit can use only nailed-up links.

Example: switched-enabled=yes

Location: Base

Usage: Specify Yes or No. The default is Yes.

Example: set sys-clock-drift-enabled=no

Location: Trap name

Usage: Specify Yes or No. The default is No.

• Yes enables Syslog updating.
• No disables Syslog updating.

Dependencies: Syslog is not a Stinger status display, but a facility that sends system status
messages to a host computer, known as the Syslog host. (For information about the syslog
daemon, see the UNIX man pages for logger(1), syslog(3), syslog.conf(5), and syslogd(8).)
The Syslog function requires UDP port 514.

Location: Log

2-200 Stinger Reference Guide

Stinger Profile and Parameter Reference
Syslog-Level

Syslog-Level
Description: Indicates the lowest level of log messages directed to the Syslog server.

Usage: Specify one of the following settings:

Setting Lowest-level message indicates

None The unit does not display log messages.
Emergency The unit has an error condition and is unlikely to be operating normally.
Alert The unit has an error condition but is still operating normally.
Critical An interface has gone down or a security error has occurred.
Error An error event has occurred.
Warning An unusual event has occurred, but the unit is otherwise operating
normally. For example, this type of message appears when a login attempt
has failed because the user entered an incorrect user name or password.
Notice Events of interest in normal operation have occurred (a link going up or
down, for example).
Info (the State and status changes that are commonly not of general interest have
default) occurred.
Debug Helpful debugging information.

By default, Syslog records with a level of Debug are filtered out, and records with a level of
Info or above are transmitted to the Syslog server.

Example: set syslog-level=notice

Dependencies: The Syslog-Level value in the Log profile affects all data streams. The
Syslog-Level value in each Auxiliary-Syslog subprofile affects the individual data stream
directed to the device specified by the Host value, and overrides the value in the Log profile.

Location: Log, Log > Auxiliary-Syslog > Auxiliary-Syslog N

Stinger Reference Guide 2-201

Stinger Profile and Parameter Reference
System

System
Description: A profile that contains system-wide settings for call management.

Usage: Use the Read and List commands to make System the working profile and list its
contents. For example:
admin> read system
SYSTEM read
admin> list
[in SYSTEM]
name=test-227
system-rmt-mgmt=yes
use-trunk-groups=yes
idle-logout=0
parallel-dialing=2
single-file-incoming=yes
analog-encoding=u-law
sessionid-base=0
shelf-controller-type=standalone
perm-conn-upd-mode=all
userstat-format=%i %l %s %r %d %a %u %c %t %n
boot-sr-version=2.1
system-8k-clock=controller

You can then use the Set command to modify the settings in the profile. To close the profile
and save your changes:
admin> write
SYSTEM written

Usage: Specify one of the following values:

• Controller (the default) specifies that the clock source is the Control Module (CM).
• Trunk-Module specifies that the clock source is the Trunk Module (TM) framer.
• BITS (Building Interoffice Timing Source) specifies that the clock source is the T1
framer.

Example: set system-8k-clock=trunk-module

Location: System

2-202 Stinger Reference Guide

Stinger Profile and Parameter Reference
System-IP-Addr

System-IP-Addr
Description: Designates the source address for IP traffic originating from the Stinger.

The system IP address is an area of memory that contains the address of one of the Ethernet
interfaces of the Stinger. By default, the system address is the IP address assigned to the
shelf-controller Ethernet interface, and the source address for outgoing IP traffic is the address
of the interface on which the Stinger transmits a packet. The system IP address is the default
address used by the Stinger during IPCP negotiations with a caller.

Usage: Specify an IP address. The default is 0.0.0.0.

Example: set system-ip-addr=10.2.3.4

Dependencies: If the System-IP-Addr becomes unreachable because of a topology change in

the network, you can still use Telnet to reach any of the unit’s interface addresses. The
following algorithm determines the source address of packets from the Stinger:
1 The source address of IP-routing protocol packets is always the local address of the
transmitting interface.
2 For incoming Telnet sessions, the source address of transmitted packets is the destination
address of the originating TCP SYN packet.
3 If the IP-Global profile setting for System-IP-Addr is nonzero, all other transmitted
packets have System-IP-Addr as the source address.
4 The source address of all other transmitted packets is the local address of the transmitting
interfaces.

Protocols that follow this algorithm include:

• TCP: Defender, Rlogin, Telnet
• UDP: Ascend Password Protocol (APP), DNS, RADIUS accounting, RADIUS
authentication, SECURID, SNMP, Syslog, TFTP, Traceroute

Location: IP-Global

Example: set system-password=mypw

Dependencies: If terminal services are disabled, System-Password does not apply. If

Security-Mode=None, the terminal server does not require a password.

Location: Terminal-Server > Terminal-Mode-Configuration

Stinger Reference Guide 2-203

Stinger Profile and Parameter Reference
System-Rmt-Mgmt

System-Rmt-Mgmt
Description: Enables or disables remote management across multichannel calls.

Usage: Specify Yes or No. The default is Yes.

• Yes allows remote management of the Stinger.
• No prevents remote management of the Stinger.

Example: set system-rmt-mgmt=yes

Location: System

2-204 Stinger Reference Guide

Stinger Profile and Parameter Reference
T

T
TACP-TX-Cell-Count
Description: Indicates the Transmit ATM Cell Processor (RACP) transmit cell count.

Usage: The TACP-TX-Cell-Count value is read only.

Example: TACP-TX-Cell-Count=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N}

Example: set target-noise-margin-down=15

Location: AL-DMT {shelf-N slot-N N} > Margin-Config

Example: set target-noise-margin-up=15

Location: AL-DMT {shelf-N slot-N N} > Margin-Config

Stinger Reference Guide 2-205

Stinger Profile and Parameter Reference
TCP

TCP
Description: Enables or disables the TCP command from the terminal-server interface.

Usage: Specify Yes or No. The default is No.

• Yes enables a user to initiate a TCP session from the terminal server.
• No prevents a user from initiating a TCP session from the terminal server.

Example: set tcp=yes

Dependencies: If terminal services are disabled, TCP does not apply.

Location: Terminal-Server > Terminal-Mode-Configuration

Location: Connection station

2-206 Stinger Reference Guide

Stinger Profile and Parameter Reference
Telnet

Telnet
Description: Enables or disables the Telnet command from the terminal-server interface.

Usage: Specify Yes or No. The default is No.

• Yes specifies that operators can invoke Telnet sessions from the terminal-server interface.
• No disables the use of Telnet in the terminal server.

Example: set telnet=yes

Dependencies: If terminal services are disabled, Telnet does not apply.

Location: Terminal-Server > Terminal-Mode-Configuration > Telnet-Options

Usage: Specify Yes or No. The default is No.

• Yes specifies that the session requires authentication only by the Telnet host.
• No specifies that the session must be locally authenticated before undergoing
authentication by the Telnet host.

Example: set telnet-host-auth=yes

Dependencies: If terminal services are disabled, Telnet-Host-Auth does not apply.

Location: Terminal-Server > Immediate-Mode-Options

Usage: Specify one of the following values:

• ASCII (the default) specifies standard 7-bit mode. In 7-bit mode, bit 8 is set to 0 (zero).
• Binary specifies that the Stinger attempts to negotiate the Telnet 8-bit binary option with
the server at the remote end. You can run X -Modem and other 8-bit file transfer protocols
in this mode.
• Transparent specifies that you can send and receive binary files without having to be in
Binary mode. You can run the same file transfer protocols that Binary mode makes
available.

Example: set telnet-mode=ascii

Stinger Reference Guide 2-207

Stinger Profile and Parameter Reference
Telnet-Options

Dependencies: Consider the following:

• In 8-bit binary mode, the Telnet escape sequence does not operate. The Telnet session can
close only if one end of the connection quits the session.
• A user can override the Binary setting on the Telnet command line.
• If terminal services are disabled, Telnet-Mode does not apply.
• Not all devices support the Binary mode option. Some devices partially follow the Telnet
RFC, but do not enforce the Telnet restriction of using only 7-bit ASCII. They accept 8-bit
data and, after doing the appropriate processing, forward all data received. If you specify
Transparent for these devices, you can escape the IAC character and add a null after every
CR to cause the devices to work.

Location: Terminal-Server > Terminal-Mode-Configuration > Telnet-Options

Usage: With Terminal-Server as the working profile, list the Terminal-Mode-Configuration

subprofile’s Telnet-Options subprofile. For example:
admin> list terminal-server terminal-mode-configuration
telnet-options
[in TERMINAL-SERVER:terminal-mode-configuration:telnot-options]
telnet=no
telnet-mode=ascii
auto-telnet=no
local-echo=no

You can then use the Set command to modify the settings in the subprofile. To close the
subprofile and return to a higher context in the working profile:
admin> list ..

Location: Terminal-Server

Example: set telnet-password=mypw

Location: IP-Global

2-208 Stinger Reference Guide

Stinger Profile and Parameter Reference
Temporary-Route

Temporary-Route
Description: Specifies that the Stinger adds the route to the routing table only when the link is
up. Temporary-Route is especially useful for nailed-up IP-routing connections.

Usage: Specify Yes or No. The default is No.

• Yes excludes a route from the routing table when its connection is down.
• No includes the route in the routing table even if its connection is down.

Example: set temporary-route=no

Location: Connection station > IP-Options

Usage: With Terminal-Server as the working profile, list the Terminal-Mode-Configuration

subprofile. For example:
admin> list terminal-mode-configuration
[in TERMINAL-SERVER:terminal-mode-configuration]
silent-mode=no
clear-screen=yes
system-password=""
banner="** Lucent Terminal Server **"
login-prompt="Login: "
password-prompt="Password: "
third-login-prompt=""
third-prompt-sequence=last
prompt="admin% "
terminal-type=vt100
clear-call=no
buffer-chars=yes
ping=no
traceroute=no
tcp=no
telnet-options={ no ascii no no }
ip-add-msg="IP address is "
prompt-format=no
login-timeout=300
rlogin-options={ no 1023 128 }

Stinger Reference Guide 2-209

Stinger Profile and Parameter Reference
Terminal-Server

You can then use the Set command to modify the settings in the subprofile. To close the
subprofile and return to a higher context in the working profile:
admin> list ..

Location: Terminal-Server

Example: set terminal-type=vt100

Dependencies: If terminal services are disabled, Terminal-Type does not apply.

Location: Terminal-Server > Terminal-Mode-Configuration

2-210 Stinger Reference Guide

Stinger Profile and Parameter Reference
Term-Rate

Term-Rate
Description: Specifies the bit rate of a Stinger serial port. When you modify the bit rate of a
serial port, you might also need to change the data-rate setting of the terminal accessing that
port.

Usage: Specify one of the following values:

57600
38400
19200
9600 (the default)
4800
2400

Example: set term-rate=19200

Location: Serial {shelf-N slot-N N}

Example: set text-1=database-server

Dependencies: When terminal services are disabled, Text-N does not apply. In addition,
Text-N is ignored if Remote-Configuration is set to Yes.

Location: Terminal-Server > Menu-Mode-Options

Example: set third-login-prompt=ID Number>>

Stinger Reference Guide 2-211

Stinger Profile and Parameter Reference
Third-Prompt-Sequence

If Third-Prompt-Sequence=First, the terminal server displays the third prompt before the login
and password prompts:
ID Number>>
Login:
Password:

If Third-Prompt-Sequence=Last, the terminal server displays the third prompt after the login
and password prompts:
Login:
Password:
ID Number>>

Dependencies: Consider the following:

• If authentication does not occur through the RADIUS server, the terminal server does not
display the Third-Login-Prompt.
• If terminal services are disabled, or if Auth-Type is set to a value other than RADIUS,
Third-Login-Prompt does not apply.

Location: Terminal-Server > Terminal-Mode-Configuration

Usage: Specify First or Last. The default is Last.

Example: set third-prompt-sequence=last

Location: Terminal-Server > Terminal-Mode-Configuration

2-212 Stinger Reference Guide

Stinger Profile and Parameter Reference
Timedate

As an alternative, you can simply use the Set command:

admin> set time hour=16

Dependencies: You can also use the Date command to set the current hour, minute, and
second.

Location: Timedate

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that terminal-server users can switch between command mode and menu
mode.
• No specifies that users have access only to the screen that you configure to come up when
a user logs in.

Example: set toggle-screen=no

Dependencies: If terminal services are disabled, Toggle-Screen does not apply.

Location: Terminal-Server > Menu-Mode-Options

Stinger Reference Guide 2-213

Stinger Profile and Parameter Reference
Top-Status

Top-Status
Description: Specifies the default content of the upper-right portion of the status window.

Usage: Specify one of the following values:

• General-Info (the default) specifies that the Stinger displays general information and
statistics for the system.
• Log-Window specifies that the Stinger displays saved system-event log entries.
• Line-Status specifies that the Stinger displays the status of system telephony interfaces.

Example: set top-status=general-info

Location: User name

Location: Connection station > IP-Options

Usage: The Total-Count setting is read only.

Example: total-count=10

Location: Device-Summary

2-214 Stinger Reference Guide

Stinger Profile and Parameter Reference
Traceroute

Traceroute
Description: Enables or disables the use of the Traceroute command in the terminal-server
interface.

Usage: Specify Yes or No. The default is No.

• Yes specifies that terminal-server users can use the Traceroute command.
• No disables the Traceroute command.

Example: set traceroute=yes

Dependencies: If terminal services are disabled, Traceroute does not apply.

Location: Terminal-Server > Terminal-Mode-Configuration

Usage: Specify one of the following dialing prefixes:

288 (AT&T)
222 (MCI)
333 (Sprint)

The default is null. If you accept the default, the Stinger uses any available IEC for
long-distance calls.

Example: set transit-number=222

Location: Connection station > Telco-Options

Stinger Reference Guide 2-215

Stinger Profile and Parameter Reference
Trap

admin> list
[in TRAP/host-231]
host-name*=host-231
community-name=mycomm
host-address=10.2.3.4/24
alarm-enabled=yes
security-enabled=yes
port-enabled=no
slot-enabled=yes
coldstart-enabled=yes
warmstart-enabled=yes
linkdown-enabled=yes
linkup-enabled=yes
ascend-enabled=yes
console-enabled=yes
use-exceeded-enabled=yes
password-enabled=yes
fr-linkup-enabled=yes
fr-linkdown-enabled=yes
event-overwrite-enabled=yes
radius-change-enabled=yes
slot-profile-change-enabled=yes
power-supply-enabled=yes
authentication-enabled=yes
config-change-enabled=yes
sys-clock-drift-enabled=yes
primary-sdtn-empty-enabled=yes
secondary-sdtn-empty-enabled=yes
suspect-access-resource-enabled=yes
watchdog-warning-enabled=yes

You can then use the Set command to modify the settings in the profile. To close the profile
and save your changes:
admin> write
TRAP/host-231 written

2-216 Stinger Reference Guide

Stinger Profile and Parameter Reference
TS-Idle-Mode

TS-Idle-Mode
Description: Specifies when the Stinger is to reset the terminal-server idle-session timer.

Usage: Specify one of the following values:

• No-Idle (the default) disables the idle timer.
• Input-Only-Idle specifies that the Stinger resets the timer when an input character is
received.
• Input-Output-Idle specifies that the Stinger resets the timer when either input or output
characters are processed.

Example: set ts-idle-mode=input-only-idle

Location: Answer-Defaults > Session-Info, Connection station > Session-Options

Usage: Specify a number from 0 to 65535. The default is 120.

Example: set ts-idle-timer=360

Dependencies: The TS-Idle-Timer setting has no effect if TS-Idle-Mode=No-Idle.

Location: Answer-Defaults > Session-Info, Connection station > Session-Options

Usage: Specify Yes or No. The default is No.

• Yes disables scrambling of the 48-byte ATM payload in transmitted cells.
• No enables scrambling of the 48-byte ATM payload in transmitted cells.

Example: set tx-cell-payload-scramble-disabled=yes

Dependencies: Set TX-Cell-Payload-Scramble-Disabled to Yes only if the receiving switch

has disabled the corresponding descramble function.

Location: OC3-ATM {shelf-N trunk-module-N N} > Line Config

Stinger Reference Guide 2-217

Stinger Profile and Parameter Reference
TX-Data-Rate-Limit

TX-Data-Rate-Limit
Description: Specifies the maximum data rate (in kbits per second) to be transmitted across
the connection. You can use this setting to limit bandwidth for a connection according to the
rate charged for the account.

Example: set tx-data-rate-limit=32000

Dependencies: The system activates configurable transmit data-rate limits only for
connections that use SDSL and unchannelized DS3 cards. If you specify a value for a
connection that does not use these cards, the system ignores the settings.

Location: Connection > Session-Options

Usage: Specify Yes or No. The default is No.

• Yes disables scrambling of the entire ATM transmit stream.
• No enables scrambling of the entire ATM transmit stream.

Example: set tx-scramble-disabled=yes

Dependencies: Set TX-Scramble-Disabled to Yes only if the receiving switch has disabled
the corresponding descramble function.

Location: OC3-ATM {shelf-N trunk-module-N N} > Line Config

2-218 Stinger Reference Guide

Stinger Profile and Parameter Reference
Type-of-Service

Example: set type-of-service=cost

Dependencies: For the Type-of-Service setting to apply, you must set Active=Yes in the
TOS-Options subprofile.

Location: Connection station > IP-Options > TOS-Options

Stinger Reference Guide 2-219

Stinger Profile and Parameter Reference
U

U
UDP-Cksum
Description: Enables or disables the use of UDP checksums on the interface. If you enable
UDP checksums, the Stinger generates a checksum whenever it sends out a UDP packet. It
sends out UDP packets for queries and responses related to the following protocols and
facilities:
DNS
ECHOSERV
RADIUS
RIP
SYSLOG
TFTP

Usage: Specify Yes or No. The default is Yes.

• Yes generates UDP checksums for queries and responses for protocols that use UDP.
• No disables UDP checksums.

Example: set udp-cksum=yes

Dependencies: You might want to enable UDP-Cksum if data integrity is of the highest
concern for your environment, and having redundant checks is important. This setting is also
appropriate if your UDP-based servers are located on the remote side of a WAN link that is
prone to errors.

Location: IP-Global

UDS3
Description: Specifies the action to take when the code image for an unchannelized DS3 card
is present in a Tar file.

Usage: Specify one of the following settings:

Location: Load-Select, DS3-ATM, Enet, Enet2, SDSL, Unknown-Cards

2-220 Stinger Reference Guide

Stinger Profile and Parameter Reference
Unit-Type

Unit-Type
Description: Specifies the operating mode of the RADSL or SDSL card.

Usage: In the AL-DMT-Stat and SDSL-Stat profile, the Unit-Type setting is read only. It can
have one of the following values:
• COE—Central Office Equipment
• CPE—Customer Premises Equipment

In an SDSL profile, you must set the Unit-Type value to COE.

Example: unit-type=coe

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Status,

SDSL {shelf-N slot-N N} > Line-Config, SDSL-Stat {shelf-N slot-N N} > Physical-Status

Usage: Specify one of the following settings:

Location: Load-Select

Stinger Reference Guide 2-221

Stinger Profile and Parameter Reference
Up-Down-Cntr

Up-Down-Cntr
Description: Indicates the number of times the link has gone from an up state to a down state
since the card was last reset.

Usage: The Up-Down-Cntr setting is read only.

Example: up-down-cntr=0

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Statistic,

SDSL-Stat {shelf-N slot-N N} > Physical-Statistic

Location: Device-State {{shelf-N slot-N N} N}

Usage: The Up-Stream-Latency value is read only.

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Status

2-222 Stinger Reference Guide

Stinger Profile and Parameter Reference
Up-Stream-Rate

Up-Stream-Rate
Description: Indicates the upstream data rate for the RADSL or SDSL interface (in bps).

Usage: The Up-Stream-Rate setting is read only. A value of 0 (zero) indicates that the data
rate is unknown.

Example: up-stream-rate=0

Dependencies: RADSL and SDSL interfaces ensure maximum throughput for the particular
condition of the line. The better the line quality, the higher the data rate.

Location: AL-DMT-Stat {shelf-N slot-N N} > Physical-Status,

SDSL-Stat {shelf-N slot-N N} > Physical-Status

Usage: Specify Yes or No. The default is Yes.

• Yes instructs the Stinger to use the Answer-Defaults profile for defaults. When you
specify Yes, the Stinger falls back to the values specified in the Answer-Defaults profile
for options that are not specified in a given external authentication profile.
• No specifies that the Stinger uses the default Internet profile for defaults. When you
specify No, the Stinger uses defaults for options not specified in a given external
authentication profile.

Example: set use-answer-for-all-defaults=no

Location: Answer-Defaults

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the system generates a trap when a specific port has exceeded the
number of DS0 minutes allocated to it, or the system DS0 usage has been exceeded.
• No specifies that the system does not generate a trap when a specific port has exceeded the
number of DS0 minutes allocated to it, or the system DS0 usage has been exceeded.

Example: set use-exceeded-enabled=no

Location: Trap host-name

Stinger Reference Guide 2-223

Stinger Profile and Parameter Reference
User

User
Description: A profile that defines a name, a password, privileges, and default displays for
user login accounts.

Usage: Use the Read and List commands to make User the working profile and list its
contents. For example:
admin> read user default
USER/default read
admin> list
[in USER/default]
name*=default
password=""
active-enabled=yes
allow-termserv=no
allow-system=no
allow-diagnostic=no
allow-update=no
allow-password=no
allow-code=no
idle-logout=0
prompt="admin> "
default-status=no
top-status=general-info
bottom-status=log-window
left-status=connection-list
use-scroll-regions=yes
log-display-level=none
screen-length=24
status-length=18

You can then use the Set command to modify the settings in the profile. To close the profile
and save your changes:
admin> write
USER/default written

2-224 Stinger Reference Guide

Stinger Profile and Parameter Reference
User-Profile

User-Profile
Description: In the IP-Global profile, specifies the name of the default User profile associated
with Telnet sessions. In a Serial profile, specifies the name of the default User profile
associated with serial access to the Stinger command interface. In an Error profile, indicates
the name of the user that reset the unit.

Usage: In the IP-Global or Serial profile, specify the name of a User profile. For the IP-Global
profile, the default is null. For the Serial profile, the default is admin. In either profile, a null
value specifies that the user must log in explicitly. In an Error profile, the User-Profile setting
is read only.

Example: set user-profile=default

Location: Error, IP-Global, Serial {shelf-N slot-N N}

String Field width Output text Meaning

%i 10 SessionID Unique ID assigned to the session
%l 10 Line/Chan Physical address (shelf.slot.line/chan)
%s 11 Slot:Item Shelf:slot:item/logical-item of the host port
%r 11 Tx/Rx Rate Transmit and receive rates
%d 3 Svc A three-letter code showing the type of ser-
vice
%a 15 Address IP address
%u 14 Username Connection profile name
%c 10 ConnTime Amount of time connected, in hours:min-
utes:seconds
%t 10 IdleTime Amount of time idle, in hours:minutes:sec-
onds
%n 24 Dialed# Number dialed if known

The default value of Userstat-Format causes the standard session-listing output format for the
Userstat command.

Stinger Reference Guide 2-225

Stinger Profile and Parameter Reference
Use-Scroll-Regions

Example: An administrator customizes the session-listing output to include only the

Username, Svc, and ConnTime information, and specifies an at-sign between the service and
connection time for each session:
admin> read system
SYSTEM read
admin> set userstat-format=%u (%d) @ %c
admin> write
SYSTEM written
admin> userstat
Username Svc ConnTime
joeb (TCP) @ 1:22:34
jimmyq (TCP) @ 3:44:19
sallyg (TCP) @ 5:12:56
<end user list> 3 active user(s)

Location: System

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the VT100 scroll-region commands are used to reduce screen redraws.
• No disables the VT100 scroll-region commands. If the status screen is not redrawing
properly, try setting Use-Scroll-Regions to No.

Example: set use-scroll-regions=yes

Location: User name

Usage: Specify Yes or No. The default is No.

• Yes specifies that all channels must be assigned a trunk group number for outgoing calls.
• No disables trunk groups.

Example: set use-trunk-groups=yes

Dependencies: When Use-Trunk-Groups=Yes, the channel configuration must specify

Trunk-Group assignments.

Location: System

2-226 Stinger Reference Guide

Stinger Profile and Parameter Reference
UsrRad-Options

Dependencies: RADIUS accounting must be configured in the Rad-Acct-Client subprofile of

the External-Auth profile.

Location: Connection station

Usage: Specify a text string of up to 30 characters. The default is null.

Location: Connection > ATM-QoS-Options

Usage: Specify a text string of up to 30 characters. The default is null.

Location: Connection > ATM-QoS-Options

Stinger Reference Guide 2-227

Stinger Profile and Parameter Reference
V

V
Valid-Cell-Counter
Description: Indicates the total number of valid cells received by the unit.

Usage: The Valid-Cell-Counter value is read only.

Example: valid-cell-counter=0

Location: OC3-ATM-Stat {shelf-N trunk-module-N N}

Location: ATMVCC-Stat circuit-name

Location: ATMPVC-Stat circuit-name

2-228 Stinger Reference Guide

Stinger Profile and Parameter Reference
VCC-Members N

Location: ATMPVC-Stat circuit-name > VCC-Members

Location: ATMPVC-Stat circuit-name, ATMVCC-Stat circuit-name

Usage: In an ATM-Options or ATM-Connect-Options subprofile, specify a number from 0 to

32767. The VCI value in the ATM-Options subprofile specifies the first side of the circuit. The
VCI value in the ATM-Connect-Options subprofile specifies the second side of the circuit. In
the ATMPVC-Stat and ATMVCC-Stat profiles, the VCI value is read only.

Location: Connection > ATM-Options, Connection > ATM-Connect-Options

ATMPVC-Stat circuit-name > VCC-Members > VCC-Members N,
ATMVCC-Stat circuit-name > VCC-Ident, Connection > ATM-Options

Stinger Reference Guide 2-229

Stinger Profile and Parameter Reference
VC-Switching-VPI

VC-Switching-VPI
Description: Specifies the VPI(s), in addition to VPI 0, that the system uses for VC
switching.

Usage: Specify a VP for each field in the array. The default is 0 (zero).

Example: set vc-switching-vpi 1=50

Dependencies: Consider the following:

• All VC-switching VPIs have a valid range specified by VPI-VCI-Range. All other VPIs
are used for VP switching.
• Adding a VPI to a list of VC-switching VPIs causes the system to allocate more VCCs for
this port. You must make sure that the number of VCCs for other ports has been reduced
to accommodate the increase in VCCs, because the system can support VCCs up to a limit
of 32K on all trunk ports combined.
For example, if the VPI-VCI-Range is 4K, and VPI 0 is the only VPI allocated for VC
switching for this port, then the port occupies 4K. If you add VPI 1 to the list of VPIs
allocated for VC switching, a total of 8K is allocated for the port.
• Any change you make to a list of VPIs is effective immediately. In order to make the
change, the system drops and re-establishes all connections.

Location: DS3-ATM {shelf-N slot-N N} > Line-Config

OC3-ATM {shelf-N trunk-module-N N} > Line-Config

Usage: Specify Yes or No. The default is Yes.

• Yes enables VJ compression for TCP packets.
• No disables VJ compression for TCP packets.

Example: set vj-header-prediction=no

Location: Answer-Defaults > IP-Answer, Connection station > IP-Options

2-230 Stinger Reference Guide

Stinger Profile and Parameter Reference
VOIP

VOIP
Description: Indicates whether the unit enables Voice over IP (VOIP).

Usage: The VOIP-Enabled setting is read only. Yes indicates that VOIP is enabled. No
indicates that VOIP is not enabled.

Example: voip-enabled=yes

Location: Base

Usage: In an ATM-Options or ATM-Connect-Options subprofile, specify a number from 0 to

255. The default is 0 (zero), which causes the unit to use VC switching. Note the following:
• The VPI value in the ATM-Options subprofile specifies the first side of the circuit.
• The VPI value in the ATM-Connect-Options subprofile specifies the second side of the
circuit.

In the ATMPVC-Stat and ATMVCC-Stat profiles, the VPI value is read only.

Location: Connection > ATM-Options, Connection > ATM-Connect-Options,

ATMPVC-Stat circuit-name, ATMVCC-Stat circuit-name

Usage: Specify a VPI from 1 to 31. The default is 15 .

Example: set vp-switching-vpi=1

Dependencies: Consider the following:

• All VP-switching VPIs have a valid range specified by VPI-VCI-Range. All other VPIs
are used for VC switching.
• Any change you make to a list of VPIs is effective immediately. In order to make the
change, the system drops and re-establishes all connections on the LIM.

Location: AL-DMT {shelf-N slot-N N} > Line-Config

SDSL {shelf-N trunk-module-N N} > Line-Config

Stinger Reference Guide 2-231

Stinger Profile and Parameter Reference
VPI-VCI-Range

VPI-VCI-Range
Description: Specifies a Virtual Path Identifier/Virtual Channel Identifier (VPI/VCI) range.

Usage: You can use the VPI-VCI-Range value to select the best combination of VPI and VCI
bit sizes to fit the list of supported VPI/VCI pairs obtained from the network provider. The new
values take effect as soon as you write the profile. Following are the possible settings:

Setting VPI range VCI range

VPI-0-255-VCI-32-255 0-255 32-255
VPI-0-255-VCI-32-511 0-255 32-511
VPI-0-255-VCI-32-1023 0-255 32-1023
VPI-0-255-VCI-32-2047 0-255 32-2047
VPI-0-255-VCI-32-4095 0-255 32-4095
VPI-0-255-VCI-32-8191 0-255 32-8191
VPI-0-255-VCI-32-16383 0-255 32-16383

Dependencies: Consider the following

• Before setting the VPI-VCI-Range value, make sure that there is only one VC-switching
VPI for the port, and that the rest of the trunk ports in the system use less than 16K for the
VCC. The system can handle a maximum 32K VCC for all trunk ports combined.
• The VCI range is valid only for VPIs assigned for VC switching by the
VC-Switching-VPI setting. VPI 0 is always used for the VCC. There are no restrictions on
the VCI range for VPIs that use VP switching.
• Exercise caution when changing the value of VPI-VCI-Range. Any increase in the range
requires the unit to reserve more VCCs for the port, and all VPIs assigned for VC
switching reserve the range. Therefore, the VCC numbers for the port increase with the
number of VPIs assigned for the VCC.
• Be very careful when changing the value of VPI-VCI-Range. In order to make the new
range effective, the system drops all connections on the system.

2-232 Stinger Reference Guide

Stinger Profile and Parameter Reference
VP-Switching

VP-Switching
Description: Specifies whether the Asynchronous Transfer Mode (ATM) link uses Virtual
Path (VP) switching.

Usage: Specify one of the following values:

• Yes specifies that the link uses VP switching.
• No specifies that the unit switches the connection’s traffic only on the basis of its virtual
channel.

Dependencies: If Encapsulation-Protocol is not set to ATM or ATM-Circuit, VP-Switching

does not apply.

Location: Connection > ATM-Options, Connection > ATM-Connect-Options

Stinger Reference Guide 2-233

Stinger Profile and Parameter Reference
W

W
Warmstart-Enabled
Description: Specifies whether the system generates a trap when the Stinger reinitializes
itself so that neither the configuration of the SNMP manager nor of the system itself is altered.

Usage: Specify Yes or No. The default is Yes.

• Yes specifies that the system generates a trap when the Stinger reinitializes itself so that
neither the configuration of the SNMP manager nor of the system itself is altered.
• No specifies that the system does not generates a trap when the Stinger reinitializes itself
so that neither the configuration of the SNMP manager nor of the system itself is altered.

Location: Trap host-name

Usage: Specify Yes or No. The default is Yes.

Example: set watchdog-warning-enabled=no

Location: Trap name

2-234 Stinger Reference Guide

Stinger Profile and Parameter Reference
Write-Access-Hosts

Or, you can set an array element without first listing the array:
admin> set write-access-hosts 1 10.2.3.4/24

or
admin> set write-access-hosts 2=10.5.6.7/29

Dependencies: For Write-Access-Hosts to restrict read-write access to the Stinger, you must
set Enforce-Address-Security=Yes.

Location: SNMP

Stinger Reference Guide 2-235

Stinger Profile and Parameter Reference
Y

Y
Yellow-Receive
Description: Specifies whether the local device has received a loss-of-frame (Yellow Alarm)
indication. A Yellow Alarm indicates that a device on the line has detected framing errors in
the signal.

Usage: The Yellow-Receive setting is read only. True specifies that the local device has
received a Yellow Alarm indication. False specifies that the local device has not received a
Yellow Alarm indication.

Location: DS3-ATM {shelf-N slot-N N}, OC3-ATM-Stat {shelf-N trunk-module-N N}

2-236 Stinger Reference Guide

Progress and Disconnect Codes
3
Progress codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Disconnect-cause codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Progress codes
Table 3-1 explains the progress codes.

Table 3-1. Progress codes

Code Explanation

0 No progress.

1 Not applicable.

2 The progress of the call is unknown.

10 The call is up.

40 The terminal-server session has started up.

41 The Stinger is establishing the TCP connection.

42 The Stinger is establishing the immediate Telnet connection.

43 The Stinger has established a raw TCP session with the host. This code does
not imply that the user has logged into the host.7

44 The Stinger has established an immediate Telnet connection with the host.
This code does not imply that the user has logged into the host.

45 The Stinger is establishing an Rlogin session.

46 The Stinger has established an Rlogin session with the host. This code does
not imply that the user has logged into the host.

47 Terminal-server authentication has begun.

60 The LAN session is up.

61 LCP negotiations are allowed.

62 CCP negotiations are allowed.

Stinger Reference Guide 3-1

Progress and Disconnect Codes
Progress codes

Table 3-1. Progress codes (continued)

Code Explanation

63 IPNCP negotiations are allowed.

65 LCP is in the Open state.

66 CCP is in the Open state.

67 IPNCP is in the Open state.

68 BNCP is in the Open state.

69 LCP is in the Initial state.

70 LCP is in the Starting state.

71 LCP is in the Closed state.

72 LCP is in the Stopped state.

73 LCP is in the Closing state.

74 LCP is in the Stopping state.

75 LCP is in the Request Sent state.

76 LCP is in the ACK Received state.

77 LCP is in the ACK Sent state.

82 BACP is being opened.

83 BACP is in an Open state.

84 CBCP is being opened.

85 CBCP is in an Open state.

90 The unit has accepted a V.110 call.

91 The V.110 call is in an Open state.

92 The V.110 call is in a carrier state.

93 The V.110 call is in a reset state.

94 The V.110 call is in a closed state.

100 The unit has determined that the call requires callback.

101 Authentication failed.

102 The remote authentication server timed out.

3-2 Stinger Reference Guide

Progress and Disconnect Codes
Disconnect-cause codes

Disconnect-cause codes
Table 3-2 explains the disconnect-cause codes.

Table 3-2. Disconnect-cause codes

Code Description

1 This value is not applied to any call.

2 The disconnect occurred for an unknown reason.

3 The call was disconnected.

4 CLID authentication failed.

5 A RADIUS timeout occurred during authentication.

6 Authentication was successful. The unit is configured to call back the

user.

7 The Pre-T310 Send Disc timer was triggered.

20 The user exited normally from the terminal server.

21 The terminal server timed out waiting for user input.

22 A forced disconnect occurred when the user exited a Telnet session.

23 No IP address was available when the user entered the SLIP com-
mand.

24 A forced disconnect occurred when the user exited a raw TCP session.

25 The user exceeded the limit for login attempts.

26 The unit attempted to start a raw TCP session, but raw TCP is dis-
abled.

27 Control-C characters were received during the login.

28 The terminal-server session cleared ungracefully.

29 The user closed a terminal-server virtual connection normally.

30 The terminal-server virtual connection cleared ungracefully.

31 The user exited from an Rlogin session.

32 The establishment of the Rlogin session failed because of bad options.

33 The unit lacks the resources to process a terminal-server request.

Stinger Reference Guide 3-3

Progress and Disconnect Codes
Disconnect-cause codes

Table 3-2. Disconnect-cause codes (continued)

Code Description

35 The MP+ session cleared because no null MP packets were received.

A unit sends (and should receive) null MP packets throughout an MP+
session.

40 LCP timed out waiting for a response.

41 LCP negotiations failed, probably because the user is configured to

send passwords by means of PAP, and the unit is configured to accept
passwords by means of CHAP (or vice versa).

42 PAP authentication failed.

43 CHAP authentication failed.

44 Authentication failed from a remote server.

45 The unit received a Terminate Request packet while LCP was in an

open state.

46 The unit received a Close Request from an upper layer, indicating

graceful LCP closure.

47 The unit cleared the call because no Network Core Protocols (NCPs)
were successfully negotiated. Typically, there is no agreement on the
type of routing or bridging that is supported for the session.

48 An MP session was disconnected. The unit accepted an added channel,

but cannot determine to which call to add the new channel.

49 The unit disconnected an MP call because no more channels could be

added.

50 Telnet or raw TCP session tables are full.

51 The unit has exhausted Telnet or raw TCP resources.

52 For a Telnet or raw TCP session, the IP address is invalid.

53 The unit cannot resolve the host name for a Telnet or raw TCP session.

54 For a Telnet or raw TCP session, the unit received a bad or missing
port number.

60 For a Telnet or raw TCP session, the host was reset.

61 For a Telnet or raw TCP session, the connection was refused.

62 For a Telnet or raw TCP session, the connection timed out.

63 For a Telnet or raw TCP session, the connection was closed by a for-
eign host.

3-4 Stinger Reference Guide

Progress and Disconnect Codes
Disconnect-cause codes

Table 3-2. Disconnect-cause codes (continued)

Code Description

64 For a Telnet or raw TCP session, the network was unreachable.

65 For a Telnet or raw TCP session, the host was unreachable.

66 For a Telnet or raw TCP session, the network admin was unreachable.

67 For a Telnet or raw TCP session, the host admin was unreachable.

68 For a Telnet or raw TCP session, the port was unreachable.

100 The session timed out.

101 The user name was invalid.

102 Callback is enabled.

115 The dial-in user is no longer active.

120 A requested protocol is disabled or unsupported.

150 A disconnect was requested by the RADIUS server.

151 The call was disconnected by the local administrator.

152 The call was disconnected by means of SNMP.

160 The unit exceeded the maximum number of V.110 retries.

170 A timeout occurred while the unit waited for the remote device to be
authenticated.

180 The user disconnected the call.

181 The call was cleared by the system.

185 The signal was lost from remote end, probably because the remote
end’s modem was turned off.

190 The resource has been quiesced.

195 The maximum duration for the call has been reached.

201 The unit has low memory.

220 The unit requires CBCP, but client does not support it.

230 The unit deleted the Virtual Router (VRouter).

240 The unit disconnected the call on the basis of LQM measurements.

241 The unit cleared a backup call.

Stinger Reference Guide 3-5

Index
? command, 1-1 AL-DMT
Fast-Path-Config, 2-81
Max-Bitrate-Down, 2-118
Max-Bitrate-Up, 2-118
A Min-Bitrate-Down, 2-121
Min-Bitrate-Up, 2-122
accounting Planned-Bitrate-Down, 2-138
RADIUS, 2-148, 2-227 Planned-Bitrate-Up, 2-138
addresses Interleave-Path-Config , 2-93
BOOTP-Enabled, 2-41 Max-Bitrate-Down, 2-118
device address, 2-100, 2-174, 2-176 Max-Bitrate-Up, 2-118
Device-Address , 2-63 Max-Delay-Down, 2-118
Max-Delay-Up, 2-119
Ethernet Media Access Control, 2-114
Min-Bitrate-Down, 2-121
gateway for static route, 2-84 Min-Bitrate-Up, 2-122
interface, 2-92 Planned-Bitrate-Down, 2-138
IP address on Ethernet, 2-94 Planned-Bitrate-Up, 2-138
IP on a WAN link, 2-157 Line-Config, 2-103
IP, system, 2-203 Line-Code, 2-102
IP-Direct, 2-95 Line-Latency-Down, 2-103
numbered interfaces on, 2-107 Max-Aggr-Power-Level-Down, 2-117
RARP-Enabled, 2-153 Max-Aggr-Power-Level-Up, 2-117
SNMP manager, 2-87 Max--Power-Spectral-Density, 2-119
static routes in, 2-84 Nailed-Group, 2-125
Rate-Adapt-Mode-Down, 2-153
administering devices, 1-10 Rate-Adapt-Mode-Up, 2-154
administering SNMP interfaces, 1-22 VP-Switching-VPI, 2-231
Admin-State-Perm-If Line-State, 2-104
Desired-Trap-State, 2-62 Margin-Config, 2-116
Inet-Profile-Type, 2-91 Max-Add-Noise-Margin-Down, 2-116
SNMP-Interface, 2-182 Max-Add-Noise-Margin-Up, 2-117
Min-Noise-Margin-Down, 2-122
Station, 2-198
Min-Noise-Margin-Up, 2-122
Admin-State-Phys-If RA-Downshift-Int-Down, 2-151
Desired-State, 2-62 RA-Downshift-Int-Up, 2-152
Desired-Trap-State, 2-62 RA-Downshift-Margin-Down, 2-152
Slot-Type, 2-179 RA-Downshift-Margin-Up, 2-152
SNMP-Interface, 2-182 RA-Upshift-Int-Down, 2-154
RA-Upshift-Int-Up, 2-154
Alarm
RA-Upshift-Margin-Down, 2-155
Action, 2-9 RA-Upshift-Margin-Up, 2-155
Alarm-LED-Major, 2-14 Target-Noise-Margin-Down, 2-205
Alarm-LED-Minor, 2-14 Target-Noise-Margin-Up, 2-205
Alarm-Relay-Major, 2-14
Name, 2-126
Alarm-Relay-Major-Duration, 2-15
Alarm-Relay-Minor, 2-15 Physical-Address, 2-136
Alarm-Relay-Minor-Duration, 2-15 Physical-Status
Enabled, 2-71 Accum-Bit-Error, 2-9
Num-Sec-Invalid, 2-128
Event, 2-76
Num-Sec-Valid, 2-128
Name, 2-126
Physical-Address, 2-136
alarm relay
major and minor, 2-14

Stinger Reference Guide Index-1

Index
B

AL-DMT-Stat VCC-Members N, 2-229

Physical-Statistic, 2-137 Port, 2-139
Attenuation-Down, 2-27 Slot-Number, 2-177
Attenuation-Up, 2-27 VCI, 2-229
Far-End-CRC, 2-79 VP-Switching, 2-231
Far-End-FEC, 2-80 ATM-QoS
Far-End-HEC, 2-80
AAL-Type, 2-2
Line-Up-Timer, 2-105
Near-End-CRC, 2-126 Contract-Name, 2-56
Near-End-FEC, 2-126 Early-Packet-Discard, 2-71
Near-End-HEC, 2-127 Partial-Packet-Discard, 2-132
Noise-Margin-Down, 2-128 QoS-Class, 2-145
Noise-Margin-Up, 2-128 ATMtrunk command, 1-5
Output-Power-Down, 2-131 ATMTrunkReset command, 1-4
Output-Power-Up, 2-131
RX-Signal-Present, 2-164 ATMVCC-Stat
Self-Test, 2-170 Circuit-Name, 2-51
Up-Down-Cntr, 2-222 Current-State, 2-58
Physical-Status, 2-137 Magic Key, 2-114
ANSI-ADSL-Ver, 2-22 VCC-Ident, 2-228
Dev-Line-State, 2-66 Port, 2-139
Down-Stream-Latency, 2-68 Slot-Number, 2-177
Down-Stream-Rate, 2-68 VCI, 2-229
Firmware-Ver, 2-82 VCC-Type, 2-229
Hardware-Ver, 2-85 VP-Switching, 2-231
IF-Group-Index, 2-89 Auth command, 1-6
Initial-ADSL-Ver, 2-92
Modem-Hw-State, 2-123 authentication services
Unit-Type, 2-221 RADIUS, 2-149
Up-Stream-Latency, 2-222 Auth-Key, 2-30
Up-Stream-Rate, 2-223
Answer-Defaults
Enabled, 2-71 B
Force-56Kbps, 2-82
IP-Answer, 2-95 Bandwidth-Stats
Routing-Metric, 2-162 Active-Upstream-Bandwidth-On-Trunks, 2-11
VJ-Header-Prediction, 2-230 Max-Upstream-Bandwidth, 2-120
Profiles-Required, 2-142 Standby-Upstream-Bandwidth-On-Trunks, 2-197
Session-Info, 2-173 Base, 2-38
Idle-Timer, 2-89 Advanced-Agent-Enabled, 2-12
Max-Call-Duration, 2-118 AIM-Enabled, 2-12
TS-Idle-Mode, 2-217 Countries-Enabled, 2-56
TS-Idle-Timer, 2-217 Data-Call-Enabled, 2-59
Use-Answer-For-All-Defaults, 2-223 D-Channel-Enabled, 2-61
ARP, Proxy-Mode, 2-144 Hardware-Level, 2-85
ARPtable command, 1-3 MAXLink-Client-Enabled, 2-119
ATM-Config Multi-Rate-Enabled, 2-123
Bandwidth-Config Network-Management-Enabled, 2-127
Bandwidth-Config N, 2-36 PHS-Support, 2-135
Allow-Guaranteed-Up-Stream-Bandwidth, 2-18 R2-Signaling-Enabled, 2-147
Allow-Max-Up-Stream-Bandwidth, 2-18 Selectools-Enabled, 2-170
Slot-VPI-VCI-Range, 2-180 Serial-Number, 2-171
Slot-VPI-VCI-Range N, 2-181 Software-Level, 2-182
ATMPVC-Stat Software-Revision, 2-183
Circuit-Name, 2-51 Software-Version, 2-183
Current-State, 2-58 Switched-Enabled, 2-200
Magic-Keys, 2-114 VOIP-Enabled, 2-231
PVC-Type, 2-144, 2-229 billing. See Telco settings, RADIUS
VCC-Members, 2-228 BOOTP, 2-41

Index-2 Stinger Reference Guide

Index
C

C List, 1-27
Load, 1-29
call management Log, 1-31
Analog-Encoding, 2-21 Netstat, 1-33
Idle-Logout, 2-89 New, 1-39
Parallel-Dialing, 2-132 NSlookup, 1-42
Single-File-Incoming, 2-174 NVRAM, 1-42
System-Rmt-Mgmt, 2-204 OAMloop, 1-43
Use-Trunk-Groups, 2-226 Open, 1-44
Called-Number-Type, 2-45 Ping, 1-45
Quit, 1-46
Call-Logging, 2-46 Read, 1-47
Call-Log-Enable, 2-46 Refresh, 1-48
Call-Log-Host-N, 2-47 Reset, 1-48
Call-Log-ID-Base, 2-48 Save, 1-49
Call-Log-Key, 2-48 Screen, 1-51
Call-Log-Limit-Retry, 2-49 SDSLlines, 1-51
Call-Log-Port, 2-49 Set, 1-53
Call-Log-RADIUS-Compat, 2-49 Show, 1-53
Call-Log-Reset-Time, 2-50 Slot, 1-54
Call-Log-Stop-Only, 2-50 Status, 1-55
Call-Log-Timeout, 2-50 Telnet, 1-56
cause codes Terminal-Server, 1-57
progress of disconnection, 3-3 Traceroute, 1-58
Clear command, 1-6 Uptime, 1-59
Clock-Source command, 1-7 Userstat, 1-60
Clr-History command, 1-8 Version, 1-62
View, 1-62
Code-level commands Which, 1-63
Format, 1-16 Whoami, 1-64
Fsck, 1-17 Write, 1-64
commands configuration
?, 1-1 backup to file, 1-49
ARPtable, 1-3 restoring from file, 1-29
ATMTrunkReset, 1-4
ATMtrunks, 1-5 Connection, 2-54
Auth, 1-6 ATM-Connect-Options
ATM1483Type, 2-23
Clear, 1-6 ATM-Enabled, 2-24
Clock-Source, 1-7 Nailed-Group, 2-125
Clr-History, 1-8 QoS-Contract, 2-145
Connection, 1-8 VCI, 2-229
Date, 1-9 VPI, 2-231
Debug, 1-9 VP-Switching, 2-233
Delete, 1-10 ATM-Options
Device, 1-10 ATM1483Type, 2-23
Dir, 1-11 ATM-Enabled, 2-24
Dircode, 1-12 Nailed-Group, 2-125
QoS-Contract, 2-145
DMTALDSLlines, 1-13 VCI, 2-229
Ether-Display, 1-15 VPI, 2-231
Fatal-History, 1-16 VP-Switching, 2-233
Format, 1-16 ATM-QoS-Options
Fsck, 1-17 Usr-Dn-Stream-Contract, 2-227
Get, 1-18 Usr-Up-Stream-Contract, 2-227
Help, 1-21 CalledNumber, 2-45
If-Admin, 1-22 Called-Number-Type, 2-45
IProute, 1-23 CLID, 2-52
Line, 1-25 Dial-Number, 2-66

Stinger Reference Guide Index-3

Index
D

Connection (continued) Device command, 1-10

Encapsulation-Protocol, 2-72 device information
Framed-Only, 2-83 Device-State, 2-64
IP-Options, 2-98, 2-214 Reqd-State, 2-158
Client-Default-Gateway, 2-52 Up-Status, 2-222
Down-Preference, 2-68
IF-Remote-Address, 2-90 Device-Address, components of , 2-100, 2-174, 2-176
IP-Direct, 2-95 Device-State, 2-64
IP-Routing-Enabled, 2-99 Device-Address, 2-63
Local-Address, 2-107 Device-State, 2-64
Preference, 2-140 Reqd-State, 2-158
Private-Route, 2-142 Up-Status, 2-222
Remote-Address, 2-157
RIP, 2-159 Device-Summary
Routing-Metric, 2-162 Disabled-Count, 2-67
Source-IP-Check, 2-193 Operational-Count, 2-130
Temporary-Route, 2-209 Total-Count, 2-214
TOS-Options Diagnostic-level commands
Active, 2-10 ATMTrunkReset, 1-4
Apply-To, 2-22 Clock-Source, 1-7
Precedence, 2-140
Debug, 1-9
Type-of-Service, 2-219
Device, 1-10
VJ-Header-Prediction, 2-230
Ether-Display, 1-15
Session-Options, 2-173
If-Admin, 1-22
Backup, 2-36
Idle-Timer, 2-89 NSlookup, 1-42
Max-Call-Duration, 2-118 OAMloop, 1-43
RX-Data-Rate-Limit, 2-164 Open, 1-44
Ses-Rate-Mode, 2-171 Ping, 1-45
Ses-Rate-Type, 2-172 Slot, 1-54
Ses-SDSL-Rate, 2-172 Telnet, 1-56
TS-Idle-Mode, 2-217 Traceroute, 1-58
TS-Idle-Timer, 2-217
TX-Data-Rate-Limit, 2-218 dial number for outbound connections, 2-66
Station, 2-198 Dir command, 1-11
Telco-Options , 2-206 Dircode command, 1-12
Answer-Originate, 2-22 disconnect cause codes, 3-3
Billing-Number, 2-40
Data-Service, 2-60 DMTALDSLlines command, 1-13
Nailed-Groups, 2-125 DNS
Transit-Number, 2-215 Domain-Name, 2-67
UsrRad-Options, 2-227 Sec-Domain-Name, 2-167
Acct-Host, 2-3 DNS lookups, 1-42
Acct-ID-Base, 2-3
Acct-Key, 2-4 DS3-ATM
Acct-Port, 2-5 AIS-Receive, 2-12
Acct-Timeout, 2-8 Enabled, 2-71
Acct-Type, 2-9 Line-Config
Connection command, 1-8 Clock-Priority, 2-53
Clock-Source, 2-53
Contact, 2-55 Framer-Mode, 2-83
control modules High-Tx-Output, 2-86
interface-independent address, 2-97 Loopback, 2-112
Nailed-Group, 2-125
Spare-Physical-Address, 2-194
Sparing-Mode, 2-195
D VC-Switching-VPI, 2-230
VPI-VCI-Range, 2-232
Date command, 1-9 Line-State, 2-104
Debug command, 1-9 Loss-Of-Frame, 2-113
Delete command, 1-10 Loss-Of-Signal, 2-113

Index-4 Stinger Reference Guide

Index
E

Physical-Address, 2-136 Auth-Frm-Adr-Start, 2-28

Yellow-Receive, 2-236 Auth-ID-Fail-Return-Busy, 2-28
DS3-ATM-Stat Auth-ID-Timeout-Return-Busy, 2-29
Auth-Keep-User-Name, 2-29
BPV-Error-Count, 2-42
Auth-Key, 2-30
CP-Bit-Error-Count, 2-57 Auth-Port, 2-30
F-Bit-Error-Count, 2-81 Auth-RADIUS-Compat, 2-30
FEB-Error-Count, 2-81 Auth-Realm-Delimiters, 2-31
P-Bit-Error-Count, 2-134 Auth-Reset-Time, 2-31
Auth-Rsp-Required, 2-31
Auth-Server-N, 2-32
E Auth-Sess-Interval, 2-32
Auth-Src-Port, 2-32
Auth-Timeout, 2-33
enabling features, 2-71
Auth-TS-Secure, 2-33
encapsulation protocols, 2-72 ID-Auth-Prefix, 2-88
Error Rad-ID-Source-Unique, 2-150
Index, 2-91 Rad-ID-Space, 2-151
IP-address, 2-94 Tac-Auth-Client
IS-Post, 2-100 Auth-Port, 2-30
Loadname, 2-106 Auth-Server-N, 2-32
Shelf, 2-174 Auth-Timeout, 2-33
Slot, 2-176 TacPlus-Auth-Client
Stack-Trace, 2-196 Auth-Port, 2-30
User-Profile, 2-225 Ext-Tsrv
Ether-Display command, 1-15 Banner N, 2-37
Ether-Info, 2-75 Hosts-Info N, 2-87
Interface-Address, 2-92 Init-Banner N, 2-92
Link-State, 2-105
MAC-Address, 2-114
Ethernet, 2-75 F
Duplex-Mode, 2-70
Ether-IF-Type, 2-74 fatal error log, 1-8, 1-16
Interface-Address, 2-92 Fatal-History command, 1-16
Link-State-Enabled, 2-106 Flash
Ethernet interface types, 2-74 file-system checking a card, 1-17
Ethernet packets, 1-15 formatting a card, 1-16
External-Auth, 2-76 listing the contents of a card, 1-12
Auth-Type, 2-34 restoring configuration, 1-29
Local-Profiles-First, 2-109 saving configurations to a file, 1-49
NoAttr6-Use-Termsrv, 2-127 Format command, 1-16
Rad-Acct-Client, 2-148 Fsck command, 1-17
Acct-Checkpoint, 2-2
Acct-Drop-Stop-On-Auth-Fail, 2-2
Acct-ID-Base, 2-3
Acct-Key, 2-4 G
Acct-Limit-Retry, 2-4
Acct-Port, 2-5 Get command, 1-18
Acct-RADIUS-Compat, 2-5
Acct-Reset-Time, 2-5
Acct-Server-N, 2-6
Acct-Sess-Interval, 2-6 H
Acct-Src-Port, 2-7
Acct-Stop-Only, 2-7 hardware handshake (serial port), 2-82
Acct-Timeout, 2-8 Help command, 1-21
Acct-Type, 2-9
Rad-Auth-Client, 2-149 help text, 1-1, 1-21
Allow-Auth-Config-Rqsts, 2-16 hosts displayed in menu mode, 2-87

Stinger Reference Guide Index-5

Index
I

I IProute command, 1-23

ICMP echo-request, 1-45

idle time, monitoring, 2-89, 2-217 L
If-Admin command, 1-22
Immediate-Mode-Options, 2-91 LIMs
displaying nailed group for port, 1-63
Interface-Address , 2-92 displaying port for nailed group, 1-63
Interface-Address, components , 2-92 LIM-Sparing-Config
interfaces Manually-Spared-Slot-Number, 2-115
how addressed, 2-97 Spare-Slot-Number, 2-195
IP on Ethernet, 2-94 Sparing-Mode, 2-195
remote station name, 2-198 LIM-Sparing-Status
IP Spared-Slot-Number, 2-194
soft interface address , 2-97 Spare-Slot-Number, 2-195
IP direct, 2-95 Sparing-Mode, 2-195
IP interface table, 1-33 Line command, 1-25
IP routing table, 1-33 List command, 1-27
IP-Global, 2-95 Load command, 1-29
BOOTP-Enabled, 2-41 loading code, 1-29
BOOTP-Relay, 2-41 Load-Select
Active, 2-10
BOOTP-Servers, 2-41
DS3-ATM, 2-69
Dialout-Poison, 2-67 Enet, 2-72
Domain-Name, 2-67 Enet2, 2-73
Drop-Source-Routed-Ip-Packets , 2-69 SDSL, 2-166
ICMP-Reply-Directed-Bcast, 2-88 UDS3, 2-220
Ignore-Def-Route , 2-90 Unknown-Cards, 2-221
Ignore-ICMP-Redirects, 2-90 location, 2-109
RARP-Enabled, 2-153 Log, 2-109
RIP-Policy, 2-160 Auxiliary-Syslog, 2-35
RIP-Pref, 2-160 Auxiliary-Syslog N, 2-35
RIP-Tag, 2-161 Facility, 2-79
Sec-Domain-Name, 2-167 Host, 2-86
Static-Pref, 2-197 Port, 2-139
Summarize-RIP-Routes, 2-199 Syslog-Level, 2-201
Suppress-Host-Routes, 2-199 Call-Info, 2-46
System-IP-Addr, 2-203 Facility, 2-79
Telnet-Password, 2-208 Log-Call-Progress, 2-110
UDP-Cksum, 2-220 Log-Software-Version, 2-112
User-Profile, 2-225 Port, 2-139
IP-Interface, 2-97 Save-Level, 2-165
Directed-Broadcast-Allowed, 2-67 Save-Number, 2-165
Interface-Address, 2-92 Syslog-Enabled, 2-200
IP-Address, 2-94 Syslog-Level, 2-201
Management-Only-Interface, 2-115 Log command, 1-31
Proxy-Mode, 2-144 log messages
RIP-Mode, 2-160 level displayed for a user login, 2-111
IP-Route, 2-99 recorded in an ASCII file, 2-200
Active-Route, 2-10 logins
Gateway-Address, 2-84 Auto-Logout, 2-34
Metric, 2-121 Banner, 2-37
Name, 2-126 Buffer-Chars, 2-43
Preference, 2-140 Clear-Call, 2-51
Private-Route, 2-142 Clear-Screen, 2-51

Index-6 Stinger Reference Guide

Index
M

enabling Ping, 2-138 O

enabling SLIP, 2-175
enabling SLIP-BOOTP, 2-175 OAMloop command, 1-43
enabling TCP command, 2-206 OC3-ATM
enabling Telnet, 2-207 Enabled, 2-71
enabling Traceroute command, 2-215 Line Config
RX-Cell-Payload-Descramble-Disabled, 2-163
Idle-Logout, 2-89
RX-Descramble-Disabled, 2-164
level of log messages displayed, 2-111 TX-Cell-Payload-Scramble-Disabled, 2-217
Login-Prompt, 2-111 TX-Scramble-Disabled, 2-218
network host, 2-86 Line-Config, 2-103
Password-Prompt, 2-133 Clock-Priority, 2-53
Clock-Source, 2-53
Prompt, 2-143 Framer-Rate, 2-83
Prompt-Format, 2-143 Loopback, 2-112
Silent-Mode, 2-174 Loop-Timing, 2-113
start with Menu mode, 2-197 Nailed-Group, 2-125
VC-Switching-VPI, 2-230
System-Password, 2-203
VPI-VCI-Range, 2-232
TCP port for logins, 2-139 Name, 2-126
Terminal-Type, 2-210 Physical-Address, 2-136
Third-Login-Prompt, 2-212 Spare-Physical-Address, 2-194
Third-Prompt-Sequence, 2-212 Sparing-State, 2-195
User-Profile, 2-225 OC3-ATM-Stat
AIS-Receive, 2-12
FIFO-Overflow-Counter, 2-81
M Frequency-Justification-Count, 2-83
HEC-Cell-Drop-Counter, 2-85
Idle-Cell-Counter, 2-88
major alarm LED, 2-14
Interval-Performance-Monitoring, 2-94
major alarm relay, 2-14 SONET-Far-End-Line-Coding-Violations, 2-183
memory, clearing, 1-42 SONET-Far-End-Line-Errored-Seconds, 2-184
SONET-Far-End-Line-Severely-Errored-Seconds, 2-184
menu mode SONET-Far-End-Line-Unavailable-Seconds, 2-185
configuring, 2-121 SONET-Far-End-Path-Coding-Violations, 2-185
default for logins, 2-197 SONET-Far-End-Path-Errored-Seconds, 2-186
SONET-Far-End-Path-Severely-Errored-Seconds, 2-186
description of hosts, 2-211
SONET-Far-End-Path-Unavailable-Seconds, 2-187
obtaining from RADIUS, 2-158 SONET-Line-Coding-Violations, 2-187
SONET-Line-Errored-Seconds, 2-188
SONET-Line-Severely-Errored-Seconds, 2-188
N SONET-Line-Unavailable-Seconds, 2-189
SONET-Path-Coding-Violations, 2-189
SONET-Path-Errored-Seconds, 2-190
nailed groups SONET-Path-Severely-Errored-Seconds, 2-190
displaying for an interface, 1-63 SONET-Path-Unavailable-Seconds, 2-191
SONET-Section-Coding-Violations, 2-191
nailed-up connections
SONET-Section-Errored-Seconds, 2-192
Backup, 2-36 SONET-Section-Severely-Errored-Framing-Seconds,
Nailed-Groups, 2-125 2-192
Temporary-Route , 2-209 SONET-Section-Severely-Errored-Seconds, 2-193
Line-State, 2-104
names, 2-126
Loss-Of-Cell-Delineation, 2-113
Netstat command, 1-33 Loss-Of-Frame, 2-113
New command, 1-39 Loss-Of-Signal, 2-113
NSlookup command, 1-42 Out-Of-Cell-Delineation, 2-130
Out-Of-Frame, 2-131
numbered interfaces, Local-Address, 2-107 Path-State, 2-133
NVRAM command, 1-42 Performance-Monitoring, 2-134

Stinger Reference Guide Index-7

Index
P

OC3-ATM-Stat (continued) preferences, 2-140

SONET-Far-End-Line-Coding-Violations, 2-183 profiles
SONET-Far-End-Line-Errored-Seconds, 2-184 Base, 2-38
SONET-Far-End-Line-Severely-Errored-Seconds, 2-184
Call-Logging, 2-46
SONET-Far-End-Line-Unavailable-Seconds, 2-185
SONET-Far-End-Path-Coding-Violations, 2-185 Connection, 2-54
SONET-Far-End-Path-Errored-Seconds, 2-186 creating new, 1-39
SONET-Far-End-Path-Severely-Errored-Seconds, 2-186 deleting, 1-10
SONET-Far-End-Path-Unavailable-Seconds, 2-187 Device-State, 2-64
SONET-Line-Coding-Violations, 2-187 displaying contents of, 1-18
SONET-Line-Errored-Seconds, 2-188 displaying working profile, 1-27
SONET-Line-Severely-Errored-Seconds, 2-188 Ether-Info, 2-75
SONET-Line-Unavailable-Seconds, 2-189 Ethernet, 2-75
SONET-Path-Coding-Violations, 2-189 External-Auth, 2-76
SONET-Path-Errored-Seconds, 2-190
indexed by interface address , 2-97
SONET-Path-Severely-Errored-Seconds, 2-190
SONET-Path-Unavailable-Seconds, 2-191 IP-Global, 2-95
SONET-Section-Coding-Violations, 2-191 IP-Interface, 2-97
SONET-Section-Errored-Seconds, 2-192 IP-Route, 2-99
SONET-Section-Severely-Errored-Framing-Seconds, listing, 1-11
2-192 Log, 2-109
SONET-Section-Severely-Errored-Seconds, 2-193 modifying, 1-53
Physical-Address, 2-136 reading into edit buffer, 1-46
RACP-CHCS-Error-Count, 2-147 saving, 1-64
RACP-RX-Cell-Count, 2-147 SDSL, 2-166
RACP-UCHCS-Error-Count, 2-148 SDSL-Stat, 2-167
RLOP-BIP-Error-Count, 2-162 Serial, 2-170
RLOP-FEBE-Error-Count, 2-162 Slot-Info, 2-177
RPOP-BIP-Error-Count, 2-162 Slot-State, 2-178
RPOP-FEBE-Error-Count, 2-163 Slot-Type, 2-179
RSOP-BIP-Error-Count, 2-163 SNMP, 2-181
Section-State, 2-168 System, 2-202
Spare-Physical-Address, 2-194 Terminal-Server, 2-210
Sparing-State, 2-195 Timedate, 2-213
TACP-TX-Cell-Count, 2-205 Trap, 2-215
Valid-Cell-Counter, 2-228 User, 2-224
Yellow-Receive, 2-236 progress codes, 3-1
Open command, 1-44 Proxy ARP, 2-144

P Q
passwords Quit command, 1-46
for Telnet, 2-208
for terminal-server logins, 2-203
viewing, 2-18
R
permissions
Allow-Code, 2-17
RADIUS accounting, 2-148, 2-227
Allow-Diagnostic, 2-17
Acct-Host, 2-3
Allow-Password, 2-18
Acct-ID-Base, 2-3, 2-48
Allow-System, 2-19
Acct-Key, 2-4
Allow-Termserv, 2-20
Acct-Port, 2-5
Allow-Update, 2-20
Acct-Reset-Time, 2-5
authenticating a profile, 1-6
Acct-Server-N , 2-6
Whoami, 1-64
Acct-Sess-Interval, 2-6
phone number for outbound calls, 2-66 Acct-Src-Port, 2-7
Physical-Address, components of, 2-100, 2-174, 2-176 Acct-Timeout, 2-8
Ping command, 1-45 Acct-Type, 2-9

Index-8 Stinger Reference Guide

Index
S

Rad-Acct-Client, 2-148 SDSL, 2-166

user-specific settings, 2-227 Enabled, 2-71
RADIUS authentication, 2-149 Line-Config, 2-103
Data-Rate-Mode, 2-59
Auth-Frm-Adr-Start, 2-28 Max-Rate, 2-119
Auth-Rsp-Required, 2-31 Unit-Type, 2-221
Auth-Sess-Interval, 2-32 VP-Switching-VPI, 2-231
Auth-Src-Port, 2-32 Nailed-Group, 2-125
Auth-TS-Secure, 2-33 Name, 2-126
Auth-Type, 2-34 SDSLlines command, 1-51
displaying a third prompt, 2-212 SDSL-Stat, 2-167
Local-Profiles-First, 2-109 Error-Count, 2-74
Rad-Auth-Client, 2-149 Line-State, 2-104
Physical-Statistic, 2-137
terminal server and, 2-158
BERT-Enable, 2-39
third prompt, displaying , 2-212 BERT-Error-Counter, 2-39
RARP, 2-153 BERT-Operation-State, 2-39
BERT-Timer, 2-40
Read command, 1-47 Far-End-dB-Attenuation, 2-80
Redundancy Firmware-Startup-Stage, 2-82
Context Line-Quality, 2-104
Context N, 2-56 Line-Up-Timer, 2-105
RX-Signal-Present, 2-164
Primary-Preference, 2-141
Self-Test, 2-170
Refresh command, 1-48 Up-Down-Cntr, 2-222
Reset command, 1-48 Physical-Status, 2-137
Dev-Line-State, 2-66
Rlogin, immediate logins, 2-171 Down-Stream-Rate, 2-68
routes Hardware-Ver, 2-85
Dialout-Poison, 2-67 IF-Group-Index, 2-89
Major-Firmware-Ver, 2-115
Down-Preference for a WAN link, 2-68
Minor-Firmware-Ver, 2-123
enabling a WAN link, 2-99 Unit-Type, 2-221
Ignore-ICMP-Redirects, 2-90 Up-Stream-Rate, 2-223
metrics for WAN links, 2-162 security
Preference, 2-140 CalledNumber, 2-45
Private-Route, 2-142 caller-ID, 2-52
RIP Enforce-Address-Security, 2-73
Metric, 2-121 Profiles-Required, 2-142
RIP-Mode, 2-160 Read-Access-Hosts, 2-156
RIP-Policy, 2-160 Read-Community, 2-156
RIP-Pref, 2-160 Read-Write-Community, 2-156
RIP-Tag, 2-161 Security-Mode, 2-169
RIP on a WAN link, 2-159 Toggle-Screen, 2-213
Write-Access-Hosts, 2-235
RIP on Ethernet, 2-160
Serial, 2-170
RIP preference, 2-160
Auto-Logout, 2-34
RIP version-1 support, 2-160, 2-199 Flow-Control, 2-82
static preference, 2-197 Term-Rate, 2-211
Temporary-Route, 2-209 User-Profile, 2-225
using the Traceroute command , 1-58 sessions
configuring WAN link options, 2-173
defaults for answered calls, 2-173
S ensuring unique session IDs, 2-172
Set command, 1-53
Save command, 1-49 shelf number, 2-100, 2-174
Screen command, 1-51 Show command, 1-53

Stinger Reference Guide Index-9

Index
S

SLIP configuration, 2-175 SS7-Gateway

slot card sessions, 1-44 Device-ID, 2-64
slot cards, displaying status , 1-53 Enabled, 2-71
Primary-IP-Address , 2-141
Slot command, 1-54
Primary-TCP-Port, 2-142
slot information Secondary-IP-Address, 2-168
Current-State, 2-58 Secondary-TCP-Port, 2-168
Reqd-State, 2-158
Status command, 1-55
slot number, 2-176
status windows
Slot-Info, 2-177 Bottom-Status, 2-42
Hardware-Level, 2-85
changing default contents, 1-62
Hardware-Rework-Count, 2-85
connection information, 1-8
Serial-Number, 2-171
Default-Status, 2-61
Slot-Address, 2-176
displaying and hiding , 1-55
Software-Level, 2-182
Left-Status, 2-101
Software-Release, 2-182
line information, 1-25
Software-Revision, 2-183
log buffer, 1-31
Software-Version, 2-183
Top-Status, 2-214
Slot-State, 2-178 Up-Status, 2-222
Current-State, 2-58 Use-Scroll-Regions , 2-226
Reqd-State, 2-158
Slot-Address, 2-176 Syslog, 1-31, 2-109, 2-200
Slot-Type, 2-179 Syslog daemon, 2-79, 2-200
Slot-Address, 2-176 System, 2-202
SNMP, 2-181 Analog-Encoding, 2-21
Contact, 2-55 Boot-SR-Version, 2-42
CSM-Modem-Diag, 2-57 Idle-Logout, 2-89
Enabled, 2-71 Name, 2-126
Enforce-Address-Security, 2-73 Parallel-Dialing, 2-132
Location, 2-109 Perm-Conn-Upd-Mode, 2-135
Read-Access-Hosts, 2-156 SessionID-Base, 2-172
Read-Community, 2-156 Single-File-Incoming, 2-174
Read-Write-Community, 2-156 System-8k-Clock, 2-202
Read-Write-Enabled, 2-156 System-Rmt-Mgmt, 2-204
traps Userstat-Format, 2-226
Alarm-Enabled, 2-14 Use-Trunk-Groups, 2-226
Ascend-Enabled, 2-23 system date and time, setting, 1-9
Authentication-Enabled, 2-28
Coldstart-Enabled, 2-53
system version, displaying, 1-62
Community-Name, 2-53 System-level commands
Console-Enabled, 2-55 ARPtable, 1-3
Event-Overwrite-Enabled, 2-76 ATMtrunks, 1-5, 1-13
Host-Address, 2-87 Clr-History, 1-8
LinkDown-Enabled, 2-105 Connection, 1-8
LinkUp-Enabled, 2-106 Dir, 1-11
Password-Enabled, 2-133
Port-Enabled, 2-139 Dircode, 1-12
Power-Supply-Enabled, 2-140 Fatal-History, 1-16
RADIUS-Change-Enabled, 2-151 Get, 1-18
Security-Enabled, 2-169 IProute, 1-23
Slot-Profile-Change-Enabled, 2-178 Line, 1-25
Use-Exceeded-Enabled, 2-223 List, 1-27
Warmstart-Enabled, 2-234 Log, 1-31
Write-Access-Hosts, 2-235 Netstat, 1-33
SNMP interfaces New, 1-39
administration, 1-22 Read, 1-46
Device Address, 2-63 Refresh, 1-48
soft interface address, 2-97 SDSLlines, 1-51

Index-10 Stinger Reference Guide

Index
T

Set, 1-53 Prompt, 2-143

Show, 1-53 Prompt-Format, 2-143
Status, 1-55 Rlogin-Options, 2-161
Uptime, 1-59 Max-Source-Port, 2-120
Userstat, 1-60 Min-Source-Port, 2-123
Version, 1-62 Silent-Mode, 2-174
View, 1-62 System-Password, 2-203
Which, 1-63 TCP, 2-206
Telnet-Options, 2-208
Auto-Telnet, 2-34
T Local-Echo, 2-108
Telnet, 2-207
TCP Telnet-Mode, 2-208
for immediate logins, 2-171
Terminal-Type, 2-210
port for immediate logins, 2-139
Third-Login-Prompt, 2-212
Telco settings Third-Prompt-Sequence, 2-212
Answer-Originate, 2-22 Traceroute, 2-215
Billing-Number, 2-40
Data-Service, 2-60 Termserv-level commands, Terminal-Server, 1-57
Transit-Number, 2-215 Timedate, 2-213
Telnet Date, 2-61
Auto-Telnet, 2-34 Time, 2-213
hosts displayed in menu , 2-87 Traceroute command, 1-58
immediate logins, 2-171
Trap, 2-215
Local-Echo, 2-108
quitting, 1-46 Alarm-Enabled, 2-14
Telnet-Host-Auth, 2-207 Ascend-Enabled, 2-23
Telnet-Mode, 2-208 Authentication-Enabled, 2-28
Telnet-Password, 2-208 Coldstart-Enabled, 2-53
using the Telnet command, 1-56 Community-Name, 2-53
Telnet command, 1-56 Config-Change-Enabled, 2-54
Terminal-Server, 2-210 Console-Enabled, 2-55
immediate login host, 2-86 Event-Overwrite-Enabled, 2-76
Immediate-Mode-Options, 2-91 Host-Address, 2-87
Service, 2-171 LinkDown-Enabled, 2-105
Telnet-Host-Auth, 2-207
Menu-Mode-Options, 2-121 LinkUp-Enabled, 2-106
Host-N, 2-87 Name, 2-126
Remote-Configuration, 2-158 Password-Enabled, 2-133
Start-With-Menus, 2-197 Port-Enabled, 2-139
Text-N, 2-211 Power-Supply-Enabled, 2-140
Toggle-Screen, 2-213
monitoring idle time, 2-217 Primary-SDTN-Empty-Enabled, 2-141
obtaining menu from RADIUS, 2-158 RADIUS-Change-Enabled, 2-151
Security-Mode, 2-169 Secondary-SDTN-Empty-Enabled, 2-167
SLIP-Mode-Configuration, 2-175 Security-Enabled, 2-169
SLIP, 2-175 Slot-Profile-Change-Enabled, 2-178
SLIP-BOOTP, 2-175 Suspect-Access-Resource-Enabled, 2-199
Terminal-Mode-Configuration , 2-210 Sys-Clock-Drift-Enabled, 2-200
Banner, 2-37
Buffer-Chars, 2-43 Use-Exceeded-Enabled, 2-223
Clear-Call, 2-51 Warmstart-Enabled, 2-234
Clear-Screen, 2-51 Watchdog-Warning-Enabled, 2-234
Login-Prompt, 2-111
trunk modules
Login-Timeout, 2-112
Password-Prompt, 2-133 displaying nailed group for port, 1-63
Ping, 2-138 displaying port for nailed group, 1-63

Stinger Reference Guide Index-11

Index
U

U W

UDP checksums, 2-220 Which command, 1-63

Update-level commands Whoami command, 1-64
Date, 1-9 Write command, 1-64
Delete, 1-10
Load, 1-29
NVRAM, 1-42 X
Reset, 1-48
XON-XOFF (serial port), 2-82
Save, 1-49
Screen, 1-51
Write, 1-64
Uptime command, 1-59
User, 2-224
Active-Enabled, 2-10
Allow-Code, 2-17
Allow-Diagnostic, 2-17
Allow-Password, 2-18
Allow-System, 2-19
Allow-Termserv, 2-20
Allow-Update, 2-20
Bottom-Status, 2-42
Default-Status, 2-61
Idle-Logout, 2-89
Left-Status, 2-101
Log-Display-Level, 2-111
Name, 2-126
Password, 2-132
Prompt, 2-143
Screen-Length, 2-166
Status-Length, 2-198
Top-Status, 2-214
Use-Scroll-Regions, 2-226
User-level commands
?, 1-1
Auth, 1-6
Clear, 1-6
Help, 1-21
Quit, 1-46
Whoami, 1-64
Userstat command, 1-60

Van Jacobsen header prediction, 2-230

Version command, 1-62
View command, 1-62
VT100 session, 1-6

Index-12 Stinger Reference Guide

Digimaster FX Series Manual
No ratings yet
Digimaster FX Series Manual
102 pages
Google Easter Eggs
No ratings yet
Google Easter Eggs
14 pages
Fileformat 1.82.00
No ratings yet
Fileformat 1.82.00
279 pages
Manual Harris Ts250
No ratings yet
Manual Harris Ts250
113 pages
ALU 9218 - 9228 Base Station Macro
No ratings yet
ALU 9218 - 9228 Base Station Macro
338 pages
Pcs Cdma Minicell
No ratings yet
Pcs Cdma Minicell
648 pages
A Comprehensive Guide About Computers and Technology
From Everand
A Comprehensive Guide About Computers and Technology
Dale Carnegie
No ratings yet
How To Steal A Nuclear Warhead Without Voiding Your XBox Warranty (Paper)
No ratings yet
How To Steal A Nuclear Warhead Without Voiding Your XBox Warranty (Paper)
6 pages
MSC - HLR Service Guild
No ratings yet
MSC - HLR Service Guild
456 pages
Network 4-Admin List of Default Router Passwords and IP Addresses Netgear D-Link Belkin Linksys Others
No ratings yet
Network 4-Admin List of Default Router Passwords and IP Addresses Netgear D-Link Belkin Linksys Others
8 pages
Wget A Noobs Guide
No ratings yet
Wget A Noobs Guide
7 pages
Ussd
No ratings yet
Ussd
5 pages
Motorola Database
No ratings yet
Motorola Database
1,397 pages
AMPCO Printable Catalogo English 2022
No ratings yet
AMPCO Printable Catalogo English 2022
62 pages
Detection and Remediation of Attack PDF
No ratings yet
Detection and Remediation of Attack PDF
4 pages
Cell Tower: Definition - What Does Mean?
No ratings yet
Cell Tower: Definition - What Does Mean?
5 pages
Exploring The Iphone Backup Made by Itunes
No ratings yet
Exploring The Iphone Backup Made by Itunes
33 pages
2600 2-12 PDF
No ratings yet
2600 2-12 PDF
8 pages
TSS (CA Top Secret Access Control Software) Audit Program Guide
No ratings yet
TSS (CA Top Secret Access Control Software) Audit Program Guide
9 pages
Backdoor (Computing) : Politics and Attribution Examples
No ratings yet
Backdoor (Computing) : Politics and Attribution Examples
9 pages
5ess Overview
No ratings yet
5ess Overview
26 pages
GTE Test Directory
No ratings yet
GTE Test Directory
59 pages
Radio Shack From 5 Watts To 1000 Watts
No ratings yet
Radio Shack From 5 Watts To 1000 Watts
156 pages
50 Awesome Auto Projects For The Evil Genius.9780071458238.43450
No ratings yet
50 Awesome Auto Projects For The Evil Genius.9780071458238.43450
11 pages
44con greedyBTS
No ratings yet
44con greedyBTS
45 pages
Fundamentals of GSM
No ratings yet
Fundamentals of GSM
16 pages
Us 17 Kacer SS7 Attacker Heaven Turns Into Riot How To Make Nation State and Intelligence Attackers Lives Much Harder On Mobile Networks
No ratings yet
Us 17 Kacer SS7 Attacker Heaven Turns Into Riot How To Make Nation State and Intelligence Attackers Lives Much Harder On Mobile Networks
85 pages
Organizational Chart and Duty Positions For SAFEALEX
No ratings yet
Organizational Chart and Duty Positions For SAFEALEX
6 pages
DEFCON 25 Yuwei Zheng UnicornTeam Ghost Telephonist
No ratings yet
DEFCON 25 Yuwei Zheng UnicornTeam Ghost Telephonist
38 pages
FM Radio Transmitter Circuit
No ratings yet
FM Radio Transmitter Circuit
4 pages
OnePlus Nord N100 - Schematic Diagarm
No ratings yet
OnePlus Nord N100 - Schematic Diagarm
127 pages
Motorola Commands
100% (1)
Motorola Commands
4 pages
Satellite Systems
No ratings yet
Satellite Systems
30 pages
GSM Word File
No ratings yet
GSM Word File
11 pages
Reed Relay and Crossbar Exchange
No ratings yet
Reed Relay and Crossbar Exchange
15 pages
EMICatalog
No ratings yet
EMICatalog
640 pages
PowerWave 044-05307 OS-1991-H0-003 Installation and Service Manual Rev A
No ratings yet
PowerWave 044-05307 OS-1991-H0-003 Installation and Service Manual Rev A
70 pages
4g Network Emulator
No ratings yet
4g Network Emulator
9 pages
Sneak Wire
No ratings yet
Sneak Wire
36 pages
Electrak Underfloor To Workstation PDF
No ratings yet
Electrak Underfloor To Workstation PDF
56 pages
Mobile Phone Privacy Report
No ratings yet
Mobile Phone Privacy Report
106 pages
Database
No ratings yet
Database
46 pages
Guide To ASTRO Digital Radios R03.00.01
100% (1)
Guide To ASTRO Digital Radios R03.00.01
57 pages
Comcast Xfinity 2012 Law Enforcement Handbook v022112
No ratings yet
Comcast Xfinity 2012 Law Enforcement Handbook v022112
33 pages
Malla Reddy Institute of Technology & Science: Wireless Network Security
No ratings yet
Malla Reddy Institute of Technology & Science: Wireless Network Security
32 pages
Galaxy Programming Manual
50% (2)
Galaxy Programming Manual
190 pages
SS7 Pocket Guide
100% (6)
SS7 Pocket Guide
43 pages
Palo Alto Networks Cybersecurity Academy: Evil Twin
No ratings yet
Palo Alto Networks Cybersecurity Academy: Evil Twin
4 pages
Imsva - Web Gateway
No ratings yet
Imsva - Web Gateway
631 pages
TAS Network Gateway 3.0: The Solution To Access Interbank Networks and Manage Financial Data Exchanges
No ratings yet
TAS Network Gateway 3.0: The Solution To Access Interbank Networks and Manage Financial Data Exchanges
4 pages
Cell Tower RFP
No ratings yet
Cell Tower RFP
69 pages
Text 911 Master Psap Registry
No ratings yet
Text 911 Master Psap Registry
720 pages
Computer Hardware Repairing Course - Computer Hardware Repairing Institute - Computer Hardware Repairing Training Delhi Tilak Nagar
No ratings yet
Computer Hardware Repairing Course - Computer Hardware Repairing Institute - Computer Hardware Repairing Training Delhi Tilak Nagar
4 pages
Telecommunications Standards
No ratings yet
Telecommunications Standards
36 pages
Sigintos A Linux Distro For Signal Intelligence
No ratings yet
Sigintos A Linux Distro For Signal Intelligence
9 pages
Mobile Learning Smartphones A Complete Guide
From Everand
Mobile Learning Smartphones A Complete Guide
Gerardus Blokdyk
No ratings yet
Building Telephony Systems with OpenSER
From Everand
Building Telephony Systems with OpenSER
Goncalves Flavio E.
No ratings yet
Stinger Reference Manual
No ratings yet
Stinger Reference Manual
330 pages
CLI Lucent Stinger
No ratings yet
CLI Lucent Stinger
182 pages
Lucent APX 8000
No ratings yet
Lucent APX 8000
436 pages
Cfm-M-Mux/Cfm-4M-Mux Indoor Unit: Indoor Unit Management System Technical Description and Configuration Guide
No ratings yet
Cfm-M-Mux/Cfm-4M-Mux Indoor Unit: Indoor Unit Management System Technical Description and Configuration Guide
63 pages
C 1 6 1 C S - 3 2 R / - L C 1 6 1 J C - 3 2 R / - L C 1 6 1 J I - 3 2 R / - L
No ratings yet
C 1 6 1 C S - 3 2 R / - L C 1 6 1 J C - 3 2 R / - L C 1 6 1 J I - 3 2 R / - L
89 pages
Delphi Series H48SC3R325, 85W Half Brick Family DC/DC Power Modules: 48V In, 3.3V/25A Out
No ratings yet
Delphi Series H48SC3R325, 85W Half Brick Family DC/DC Power Modules: 48V In, 3.3V/25A Out
13 pages
31503922-MA5105 Configuration Guide - (V100R010 - 02)
No ratings yet
31503922-MA5105 Configuration Guide - (V100R010 - 02)
254 pages
Manual CDM 625
No ratings yet
Manual CDM 625
322 pages
Sma16 SellingBrief PDF
No ratings yet
Sma16 SellingBrief PDF
27 pages
Dsa 261779
No ratings yet
Dsa 261779
489 pages
Co-Po Big Data Analytics
No ratings yet
Co-Po Big Data Analytics
41 pages
Section Quiz CH 1 - CH 14
No ratings yet
Section Quiz CH 1 - CH 14
494 pages
Ethical Hacking MindMap
100% (1)
Ethical Hacking MindMap
1 page
Service Manual Sharp AL1215 - 1530cs - 1540cs - 1551cs
No ratings yet
Service Manual Sharp AL1215 - 1530cs - 1540cs - 1551cs
131 pages
Value Stream Maps
No ratings yet
Value Stream Maps
2 pages
SEMINAR ON CLOUD SECURITY ...CHALLENGES AND SOLUTION ..Final! 2
No ratings yet
SEMINAR ON CLOUD SECURITY ...CHALLENGES AND SOLUTION ..Final! 2
65 pages
MCQ Adb PDF
No ratings yet
MCQ Adb PDF
6 pages
Kaspersky EDR
No ratings yet
Kaspersky EDR
49 pages
window-mfs110-rdservice-releasenotes
No ratings yet
window-mfs110-rdservice-releasenotes
6 pages
ProE Lab Work 1 To 11
No ratings yet
ProE Lab Work 1 To 11
11 pages
CAPE Computer Science 2015 u2 p2
No ratings yet
CAPE Computer Science 2015 u2 p2
7 pages
Half Yearly-Viii Comp MR
No ratings yet
Half Yearly-Viii Comp MR
2 pages
Composite Datatypes: Types: PL/SQL Records PL/SQL Tables Contain Internal Components Are Reusable
No ratings yet
Composite Datatypes: Types: PL/SQL Records PL/SQL Tables Contain Internal Components Are Reusable
14 pages
OJK Institute - Big Data v2
No ratings yet
OJK Institute - Big Data v2
10 pages
ST Lecture Experience Based Testing
No ratings yet
ST Lecture Experience Based Testing
11 pages
Word 2007 Final
No ratings yet
Word 2007 Final
68 pages
Designer Template
No ratings yet
Designer Template
1 page
Operators in Java
No ratings yet
Operators in Java
3 pages
New-Preparation for Noon Interview
No ratings yet
New-Preparation for Noon Interview
4 pages
Accounting Information Systems 10th Edition Gelinas Test Bank 1
100% (66)
Accounting Information Systems 10th Edition Gelinas Test Bank 1
29 pages
10 - CPU Based YOLO A Real Time Object Detection Algorithm
No ratings yet
10 - CPU Based YOLO A Real Time Object Detection Algorithm
4 pages
Eunice Choi CDL GVA Resume
No ratings yet
Eunice Choi CDL GVA Resume
1 page
Ek110x Ek15xxen
No ratings yet
Ek110x Ek15xxen
108 pages
Programming with C 20 Concepts Coroutines Ranges and more Updated 2024 2nd Edition Andreas Fertig - Instantly access the full ebook content in just a few seconds
100% (1)
Programming with C 20 Concepts Coroutines Ranges and more Updated 2024 2nd Edition Andreas Fertig - Instantly access the full ebook content in just a few seconds
48 pages
Linux Command Line For You and Me Documentation: Release 0.1
No ratings yet
Linux Command Line For You and Me Documentation: Release 0.1
94 pages
User Kelas 11S
No ratings yet
User Kelas 11S
3 pages
AOS UNIT-3
No ratings yet
AOS UNIT-3
34 pages
Business Analytics Using Excel
No ratings yet
Business Analytics Using Excel
56 pages
App List
No ratings yet
App List
5 pages
ABAP Programming
0% (1)
ABAP Programming
15 pages

Stinger Ref Guide PDF

Uploaded by

Stinger Ref Guide PDF

Uploaded by

Stinger Reference Guide

Part Number: 7820-0713-001

Support Telephone Numbers

Finding information and software on the Internet

Obtaining technical assistance

Enabling Lucent to assist you

Calling Lucent from within the United States

Stinger Reference Guide iii

Telephone outside the United States (510) 769-8027

Obtaining assistance through correspondence

Write to Lucent at the following address:

Attn: Customer Service

iv Stinger Reference Guide

About This Guide ............................................................................. vii

Chapter 1 Stinger Command Reference......................................................... 1-1

Chapter 2 Stinger Profile and Parameter Reference ..................................... 2-1

Chapter 3 Progress and Disconnect Codes................................................... 3-1

Stinger Reference Guide v

What is in this guide

What you should know

Stinger Reference Guide vii

! Warns that a failure to follow the recommended procedure could result

Warns that a failure to take appropriate safety precautions could result

viii Stinger Reference Guide

Stinger Reference Guide ix

For an alphabetic list of commands, just enter a question mark:

The command line accepts a maximum of 80 characters, including the prompt.

Permission level: User

Stinger Reference Guide 1-1

Example: To display a list of commands authorized for your current login:

To display help text about a command:

See Also: Help, Auth

1-2 Stinger Reference Guide

Permission level: System

Usage: arptable [-a IP_address MAC_address]|

Example: To display the ARP table:

Stinger Reference Guide 1-3

The ARP table displays the following information:

See Also: NSlookup

Permission level: Diagnostic

Usage: atmtrunkreset [-17|-18]

See Also: ATMtrunks

1-4 Stinger Reference Guide

Usage: atmtrunks [-a|-d|-f|-u]

Example: To display all ATM trunks:

See Also: SDSLlines

Stinger Reference Guide 1-5

Permission level: User

Usage: auth user-name

Example: To login as Joe:

Enter the user name again to display the Password prompt.

See Also: Whoami

Permission level: User

Usage: clear [-r]

Example: To clear the screen:

1-6 Stinger Reference Guide

Permission level: Diagnostic

Following are examples of log messages generated for clock-source transitions:

See Also: Line, Open

Stinger Reference Guide 1-7

Permission level: System

To clear the log:

See Also: Fatal-History

Permission level: System

Example: An administrator opens a window with connection status information displayed:

12/27/1998 12:20:15 Up: 3 days, 21:47:32

M: 29 L: info Src: shelf-1/controller

Issued: 16:48:02, 09/27/1998

1-8 Stinger Reference Guide

See Also: Line, List, Log, Status, View

Permission level: Update

Usage: date [yymmddhhmm]

Permission level: Diagnostic

Usage: debug on | off

Syntax element Description

Stinger Reference Guide 1-9