HCC/HCF4048B

MULTIFUNCTION EXPANDABLE 8-INPUT GATE

.. THREE-STATE OUTPUT
MANY LOGIC FUNCTIONS AVAILABLE IN

. ONE PACKAGE
QUIESCENT CURRENT SPECIFIED TO 20V

. FOR HCC DEVICE

STANDARDIZED SYMMETRICAL OUTPUT

.. CHARACTERISTICS
5V, 10V, AND 15V PARAMETRIC RATINGS
INPUT CURRENT OF 100nA AT 18V AND 25°C
EY
Plastic Package
F
Ceramic Frit Seal Package

.. FOR HCC DEVICE

100% TESTED FOR QUIESCENT CURRENT
MEETS ALL REQUIREMENTS OF JEDEC TEN-
TATIVE STANDARD N°. 13A, ”STANDARD
M1 C1
SPECIFICATIONS FOR DESCRIPTION OF ”B”
Micro Package Plastic Chip Carrier
SERIES CMOS DEVICES”
ORDER CODES :
HCC4048BF HCF4048BM1
HCF4048BEY HCF4048BC1

PIN CONNECTIONS

DESCRIPTION
The HCC4048B (extended temperature range) and
HCF4048B (intermediate temperature range) are
monolithic integrated circuit, available in 16-lead
dual in-line plastic or ceramic package and plastic
micro package. The HCC/HCF4048B is an 8-input
gate having four control inputs. Three binary control
inputs - Ka, Kb, and Kc - provide the implementation
of eight different logic functions. These functions are
OR, NOR, AND, NAND, OR/AND, OR/NAND,
AND/OR and AND/NOR. A fourth control input-Kd-
provides the user with a 3-state output. When control
input Kd is high the output is either a logic 1 or a logic
0 depending on the inner states. When control input
Kd is low, the output is an open circuit. This feature
enables the user to connect this device to a common
bus line. In addition to the eight input lines, an EX-
PAND input is provided that permits the user to in-
crease the number of inputs to one HCC/HCF4048B.
For example, two HCC/HCF4048B’s can be cas-
caded to provide a 16-input multifunction gate. When
the EXPAND input is not used, it should be con-
nected to VSS.

October 1988 1/12

HCC/HCF4048B

FUNCTIONAL DIAGRAM

ABSOLUTE MAXIMUM RATINGS

Symbol Parameter Value Unit
V DD* Supply Voltage : HC C Types – 0.5 to + 20 V
H C F Types – 0.5 to + 18 V
Vi Input Voltage – 0.5 to V DD + 0.5 V
II DC Input Current (any one input) ± 10 mA
Pt ot Total Power Dissipation (per package) 200 mW
Dissipation per Output Transistor
for T o p = Full Package-temperature Range 100 mW
Top Operating Temperature : HCC Types – 55 to + 125 °C
H CF Types – 40 to + 85 °C
Tstg Storage Temperature – 65 to + 150 °C
Stresses above those listed under ”Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability.
* All voltages values are referred to VSS pin voltage.

RECOMMENDED OPERATING CONDITIONS

Symbol Parameter Value Unit
V DD Supply Voltage : HC C Types 3 to 18 V
H C F Types 3 to 15 V
VI Input Voltage 0 to V DD V
Top Operating Temperature : H CC Types – 55 to + 125 °C
H C F Types – 40 to + 85 °C

2/12
 HCC/HCF4048B

BASIC LOGIC CONFIGURATIONS

LOGIC DIAGRAM

FUNCTION TRUTH TABLE

Output Function Boolean Expression Ka Kb Kc Unused Input
NOR J = A+B+C +D+E+ F +G+H 0 0 0 VS S
OR J=A+B+C+D+E+F +G+H 0 0 1 VS S
OR/AND J = (A + B + C + D) • (E + F + G + H) 0 1 0 VS S
OR/NAND J = (A + B + C + D) • (E + F + G + H) 0 1 1 VS S
AND J = ABCDEFGH 1 0 0 V DD
NAND J = ABCDEFGH 1 0 1 V DD
AND/NOR J = ABCD + EFGH 1 1 0 V DD
AND/OR J = ABCD + EFGH 1 1 1 V DD
K d = 1 Normal Inverter Action
K d = 0 High Impedance Output
EXPAND Input = 0

3/12
HCC/HCF4048B

STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions)

Test Conditions Value
Symbol Parameter VI VO |I O | V D D T L o w* 25 °C T Hi g h * Unit
(V) (V) (µA) (V) Min. Max. Min. Typ. Max. Min. Max.
IL Quiescent 0/ 5 5 0.25 0.01 0.25 7.5
Current HCC 0/10 10 0.5 0.01 0.5 15
Types 0/15 15 1 0.01 1 30
0/20 20 5 0.02 5 150 µA
0/ 5 5 1 0.01 1 7.5
HCF
0/10 10 2 0.01 2 15
Types
0/15 15 4 0.01 4 30
V OH Output High 0/ 5 <1 5 4.95 4.95 4.95
Voltage 0/10 <1 10 9.95 9.95 9.95 V
0/15 <1 15 14.95 14.95 14.95
V OL Output Low 5/0 <1 5 0.05 0.05 0.05
Voltage 10/0 <1 10 0.05 0.05 0.05 V
15/0 <1 15 0.05 0.05 0.05
V IH Input High 0.5/4.5 < 1 5 3.5 3.5 3.5
Voltage 1/9 <1 10 7 7 7 V
1.5/13.5 < 1 15 11 11 11
V IL Input Low 4.5/0.5 < 1 5 1.5 1.5 1.5
Voltage 9/1 <1 10 3 3 3 V
13.5/1.5 < 1 15 4 4 4
I OH Output 0/ 5 2.5 5 – 2 – 1.6 – 3.2 – 1.15
Drive HCC 0/ 5 4.6 5 – 0.64 – 0.51 – 1 – 0.36
Current Types 0/10 9.5 10 – 1.6 – 1.3 – 2.6 – 0.9
0/15 13.5 15 – 4.2 – 3.4 – 6.8 – 2.4
mA
0/ 5 2.5 5 – 1.53 – 1.36 – 3.2 – 1.1
HCF 0/ 5 4.6 5 – 0.52 – 0.44 – 1 – 0.36
Types 0/10 9.5 10 – 1.3 – 1.1 – 2.6 – 0.9
0/15 13.5 15 – 3.6 – 3.0 – 6.8 – 2.4
I OL Output 0/ 5 0.4 5 0.64 0.51 1 0.36
Sink HCC
0/10 0.5 10 1.6 1.3 2.6 0.9
Current Types
0/15 1.5 15 4.2 3.4 6.8 2.4
0/ 5 0.4 5 0.52 0.44 1 0.36 mA
HCF
0/10 0.5 10 1.3 1.1 2.6 0.9
Types
0/15 1.5 15 3.6 3.0 6.8 2.4
I IH , I IL Input HCC
Leakage Types
0/18 18 ± 0.1 ± 10-5 ± 0.01 ± 1
Any Input µA
Current HCF
0/15 15 ± 0.3 ± 10-5 ± 0.3 ± 1
Types
I OH 3-state HCC
0/18 0/18 18 ± 0.4 ± 10-4 ± 0.4 ± 12
Output Types
µA
Current HCF
0/15 0/15 15 ± 1.0 ± 10-4 ± 1.0 ± 7.5
Types
CI Input Capacitance Any Input 5 7.5 pF
* TLOW = – 55°C for HCC device : – 40°C for HCF device.
* THIGH = – 125°C for HCC device : – 85°C for HCF device.
The Noise Margin for both ”1” and ”0” level is : 1V min. with VDD = 5V, 2V min. with VDD = 10V, 2.5V min. with VDD = 15V,

4/12
 HCC/HCF4048B

DYNAMIC ELECTRICAL CHARACTERISTICS (T amb = 25°C, CL = 50pF, R L = 200kΩ,

typical temperature coefficient for all V DD = 0.3%/°C values, all input rise and fall time = 20ns)
Test Conditions Value
Symbol Parameter Unit
V D D (V) Min. Typ. Max.
t PHL , t PL H Propagation Delay Time Inputs 5 300 600
to Output and Ka to Output 10 150 300
15 120 240
Kb to Output 5 225 450
10 85 170
15 55 110
Kc to Output 5 140 280
10 50 100
15 40 80 ns
Expand Input to Output 5 190 380
10 90 180
15 65 130
t PHZ , t PL Z 3–state Propagation Delay Time R L = 1kΩ 5 80 160
t PZ H, t PZ L Kd to Output 10 35 70
15 25 50
t T HL , t TL H Transition Time 5 100 200
10 50 100
15 40 80
3-state Output Capacitance 5 10 pF

Typical Output Low (sink) Current Characteristics. Minimum Output Low (sink) Current Characteristics.

5/12
HCC/HCF4048B

Typical Output High (source) Current Charac- Minimum Output high (source) Current Charac-
teristics. teristics.

APPLICATIONS OF EXPAND INPUT

ACTUAL-CIRCUIT LOGIC CONFIGURATIONS EXPANSION LOGIC AND TRUTH TABLE
IMPLEMENTATION OF EXPAND INPUT
FOR 9 OR MORE INPUTS
FUNCTION
OUTPUT
NEEDEDAT OUTPUT BOOLEAN EXPRESSION
FUNCTION
EXPANDINPUT
NOR OR J = (A+B+C+D+E+F+G+H) + (EXP)
OR OR J = (A+B+C+D+E+F+G+H) + (EXP)
AND NAND J = (ABCDEFGH) ⋅ (EXP)
NAND NAND J = (ABCDEFGH) ⋅ (EXP)
OR/AND NOR J = (A+B+C+D) ⋅ (E+F+G+H) ⋅ (EXP)
OR/NAND NOR J = (A+B+C+D) ⋅ (E+F+G+H) ⋅ (EXP)
AND/NOR AND J = (ABCD) + (EFGH) + (EXP)
AND/OR AND J = (ABCD) + (EFGH) + (EXP)
Note :(EXP) designates the EXPAND function (i.e., X1 + X2 + . . XN).

6/12
 HCC/HCF4048B

APPLICATIONS OF EXPAND INPUT (continued)

12-Input or/and Gate. 16-Input Nor Gate.

TEST CIRCUITS
Quiescent Device Current. Input Voltage.

Input Current.

7/12
HCC/HCF4048B

Plastic DIP16 (0.25) MECHANICAL DATA

mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.

a1 0.51 0.020

B 0.77 1.65 0.030 0.065

b 0.5 0.020

b1 0.25 0.010

D 20 0.787

E 8.5 0.335

e 2.54 0.100

e3 17.78 0.700

F 7.1 0.280

I 5.1 0.201

L 3.3 0.130

Z 1.27 0.050

P001C

8/12
 HCC/HCF4048B

Ceramic DIP16/1 MECHANICAL DATA

mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.

A 20 0.787

B 7 0.276

D 3.3 0.130

E 0.38 0.015

e3 17.78 0.700

F 2.29 2.79 0.090 0.110

G 0.4 0.55 0.016 0.022

H 1.17 1.52 0.046 0.060

L 0.22 0.31 0.009 0.012

M 0.51 1.27 0.020 0.050

N 10.3 0.406

P 7.8 8.05 0.307 0.317

Q 5.08 0.200

P053D

9/12
HCC/HCF4048B

SO16 (Narrow) MECHANICAL DATA

mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.
A 1.75 0.068
a1 0.1 0.2 0.004 0.007
a2 1.65 0.064
b 0.35 0.46 0.013 0.018
b1 0.19 0.25 0.007 0.010
C 0.5 0.019
c1 45° (typ.)
D 9.8 10 0.385 0.393
E 5.8 6.2 0.228 0.244
e 1.27 0.050
e3 8.89 0.350
F 3.8 4.0 0.149 0.157
G 4.6 5.3 0.181 0.208
L 0.5 1.27 0.019 0.050
M 0.62 0.024
S 8° (max.)

P013H

10/12
 HCC/HCF4048B

PLCC20 MECHANICAL DATA

mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.

A 9.78 10.03 0.385 0.395

B 8.89 9.04 0.350 0.356

D 4.2 4.57 0.165 0.180

d1 2.54 0.100

d2 0.56 0.022

E 7.37 8.38 0.290 0.330

e 1.27 0.050

e3 5.08 0.200

F 0.38 0.015

G 0.101 0.004

M 1.27 0.050

M1 1.14 0.045

P027A

11/12
HCC/HCF4048B

Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No
license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned
in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied.
SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express
written approval of SGS-THOMSON Microelectonics.

 1994 SGS-THOMSON Microelectronics - All Rights Reserved

SGS-THOMSON Microelectronics GROUP OF COMPANIES

Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands -
Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A

12/12