Scribd
Upload
67 views

Reverse Osmosis Exploded Diagram

This document provides an exploded diagram and descriptions of the components for a reverse osmosis water filtration system. The system includes: 1) a cold water line, 2) an angle stop valve, 3) a sediment pre-filter, 4) a carbon block pre-filter, 5) fittings to connect the filters and membrane housing, 6) a reverse osmosis membrane housing, 7) a storage tank, 8) carbon post-filter, 9) a faucet to dispense purified water, and 10) drain pipes to remove waste water.

Uploaded by

Nazım Tola
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
67 views

Reverse Osmosis Exploded Diagram

This document provides an exploded diagram and descriptions of the components for a reverse osmosis water filtration system. The system includes: 1) a cold water line, 2) an angle stop valve, 3) a sediment pre-filter, 4) a carbon block pre-filter, 5) fittings to connect the filters and membrane housing, 6) a reverse osmosis membrane housing, 7) a storage tank, 8) carbon post-filter, 9) a faucet to dispense purified water, and 10) drain pipes to remove waste water.

Uploaded by

Nazım Tola
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

REVERSE OSMOSIS SYSTEM

Exploded Diagram

18

15

12

17
13 14

16

19

11
10
20

OUT IN
9
8 1

7
2

System Components
1.) Cold Water Line
2.) Angle Stop Valve 6
3.) Cold Water Shut-off Valve
4.) Melt Blown Sediment Pre Filter 3
5.) Carbon Block Pre Filter
6.) Nipple 5 4
7.) Mounting Bracket
8.) Single Clip
9.) Automatic Shut-Off Valve
10.) RO Membrane Housing
11.) Check Valve
12.) Tank Valve
13.) Bladder Tank
14.) Double Clip * Locking clips are
are used on fittings where
wher the tubing
15.) Inline Granular Carbon Post Filter has a bend near the fitting
fitting.
16.) Drain Flow Restrictor
17.) Quick-Connect Faucet Connector ** Units come with plugs in the in
inlet, outlet and open
18.) Reverse Osmosis Water Faucet end of
of T on the post-filter to create
create an air tig
tight seal.
19.) 1½” Drain Pipe Remove these plugs to perform the installation.
Remo
20.) Drain Clamp

You might also like