Scribd
Upload
69 views

ETABS 2016 Concrete Frame Design: ETABS 2016 16.2.1 License # 1SRAL4HSLYXM7Q8

This document summarizes the design of a concrete beam element in ETABS. It provides the details of the beam including its section properties, material properties, design code parameters, factored forces and moments, and the results of the design including required flexural and shear reinforcement. The beam has a length of 4419.6mm and a cross section of 400x230mm. The design was conducted according to IS 456:2000 and resulted in required flexural reinforcement of 197mm2 on the bottom and 596mm2 on the top to resist bending moments of up to -78.1kNm. 380mm2/m of shear reinforcement is required to resist a factored shear force of 71.9kN.

Uploaded by

er.praveenraj30
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
69 views

ETABS 2016 Concrete Frame Design: ETABS 2016 16.2.1 License # 1SRAL4HSLYXM7Q8

This document summarizes the design of a concrete beam element in ETABS. It provides the details of the beam including its section properties, material properties, design code parameters, factored forces and moments, and the results of the design including required flexural and shear reinforcement. The beam has a length of 4419.6mm and a cross section of 400x230mm. The design was conducted according to IS 456:2000 and resulted in required flexural reinforcement of 197mm2 on the bottom and 596mm2 on the top to resist bending moments of up to -78.1kNm. 380mm2/m of shear reinforcement is required to resist a factored shear force of 71.9kN.

Uploaded by

er.praveenraj30
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ETABS 2016 16.2.

1 License #*1SRAL4HSLYXM7Q8

ETABS 2016 Concrete Frame Design


IS 456:2000 Beam Section Design

Beam Element Details Type: Ductile Frame (Summary) (Part 1 of 2)


Level Element Unique Name Section ID Combo ID Station Loc
First B21 70 BEAM 400X230 1DL+1.3LL+1.25EQY 4269.6

Beam Element Details Type: Ductile Frame (Summary) (Part 2 of 2)


Length (mm) LLRF
4419.6 1

Section Properties
b (mm) h (mm) bf (mm) ds (mm) dct (mm) dcb (mm)
230 400 230 0 33 33

Material Properties
Ec (MPa) fck (MPa) Lt.Wt Factor (Unitless) fy (MPa) fys (MPa)
22360.68 20 1 500 415

Design Code Parameters


ɣC ɣS
1.5 1.15

Factored Forces and Moments

Factored Factored Factored Factored


Mu3 Tu Vu2 Pu
kN-m kN-m kN kN

-78.0632 0.0258 71.8679 0

Design Moments, Mu3 & Mt

Factored Factored Positive Negative


Moment Mt Moment Moment
kN-m kN-m kN-m kN-m

-78.0632 0.0416 0 -78.1048

Design Moment and Flexural Reinforcement for Moment, Mu3 & Tu

BINOD 2&HALF ANALYSIS.EDB Page 1 of 2 8/8/2018


ETABS 2016 16.2.1 License #*1SRAL4HSLYXM7Q8

Design Design -Moment +Moment Minimum Required


-Moment +Moment Rebar Rebar Rebar Rebar
kN-m kN-m mm² mm² mm² mm²

Top (+2 Axis) -78.1048 596 0 596 197


Bottom (-2 Axis) 0 298 0 0 298

Shear Force and Reinforcement for Shear, Vu2 & Tu


Shear Ve Shear Vc Shear Vs Shear Vp Rebar Asv /s
kN kN kN kN mm²/m
96.2575 46.094 50.3434 43.2902 380.12

Torsion Force and Torsion Reinforcement for Torsion, T u & VU2


Tu Vu Core b1 Core d1 Rebar Asvt /s
kN-m kN mm mm mm²/m
0.0258 71.8679 184 354 0

BINOD 2&HALF ANALYSIS.EDB Page 2 of 2 8/8/2018

You might also like