https://leeaint.

com/individual-trainee
LEEA

1. Foundation Course [FOU]

Description

The Foundation Course is aimed at a beginner’s level. It covers common types of lifting equipment used
across the industry and basic knowledge of key topics. 

This course is a pre-requisite for LEEA’s Advanced Programmes and does not qualify you to do inspection
or examination of lifting equipment.

Duration

Instructor Led Training - 3 days

e-Learning - average 18 hours

Delegates

Maximum number for Instructor Led Training - 12 delegates

Course Contents

1. Legislation
2. Standards & Codes of Practice
3. Materials
4. Basic Heat Treatment
5. Unit of Measure
6. Basic Force, Stress and Strain
7. Basic Mechanics of Simple Machines
8. Methods of Manufacture
9. Verification of Lifting Equipment
10. Wire Rope & Wire Rope Slings
11. Chain & Chain Slings
12. Rating and Marking of Lifting Equipment
13. Textile Slings - Fibre Rope & Fibre Rope Slings
14. Textile Webbing Slings
15. Textile Roundslings
16. Components for Slings
17. Shackles & Eyebolts
18. Turnbuckles
19. Chain Hoists
20. Lever Hoists
21. Jaw Winches
22. Jacks for Lifting
23. Crane Forks & C-Hooks
24. Powered Lifting Machines
25. Runways & Crane Structures
26. Overhead Travelling Cranes
27. Offshore Containers
28. Mobile Cranes

Delivery Options

 e-Learning
 Instructor Led Training at Huntingdon Training Centre

(SUNAZ ODAKKAL; DEPUTY GENERAL MANAGER (OPERATION); [email protected]

https://leeaint.com/individual-trainee
LEEA
 Instructor Led Training on your premises (members only)
 Blended learning (members only)

Requirements

 No previous experience or qualifications required

 You must be over 18 years old.
 You must be employed by a LEEA member or registered with us as an Individual Trainee

2. Lifting Equipment General [LEG] Advanced Programme

Description

Lifting Equipment General is an Advanced Programme which focuses on the inspection and thorough
examination of lifting accessories.

Duration

Instructor Led Training - 5 days

e-Learning - average 20 hours

Delegates

Maximum number for Instructor Led Training - 12 delegates

Course Contents

1. Legislation
2. Heat Treatment
3. Stress and Strain
4. Verification of Lifting Equipment
5. Components for Slings
6. Chain and Chain Slings
7. Steel Wire Rope Slings
8. Fibre Rope Slings
9. Textile Webbing Slings
10. Textile Roundslings
11. Shackles & Eyebolts
12. Rigging Screws & Turnbuckles
13. Plate Clamps
14. Clamps
15. Lifting Beams
16. Lifting Magnets
17. Vacuum Lifters
18. Crane Forks & C-Hooks

Delivery Options

 e-Learning
 Instructor Led Training at Huntingdon Training Centre
 Instructor Led Training on your premises (members only)
 Blended learning (members only)

(SUNAZ ODAKKAL; DEPUTY GENERAL MANAGER (OPERATION); [email protected]

https://leeaint.com/individual-trainee
LEEA
Requirements

 Passed the LEEA Foundation or previous Part 1 Entry (P1E) course

 You must be over 18 years old
 You must be employed by a LEEA member or registered with us as an Individual Trainee

3. Lifting Machines Manual [LMM] Advanced Programme

Description

Lifting Machines Manual is an Advanced Programme which focuses on the inspection and thorough
examination of manually operated lifting machines.

Duration

Instructor Led Training - 5 days

e-Learning - average 18 hours

Delegates

Maximum number for Instructor Led Training - 8 delegates

Course Contents

1. Legislation
2. Mechanics of Machines
3. Verification
4. Load Chain
5. Load Rope
6. Screw Brake Mechanisms
7. Hand Chain Hoists
8. Lever Hoists
9. Lifting and Pulling Machines
10. Hand Operated Winches
11. Travelling Trolleys
12. Mechanical and Hydraulic Jacks
13. Pulley Blocks
14. Site Testing & Examination of Manual Lifting Machines

Delivery Options

 e-Learning
 Instructor Led Training at Huntingdon Training Centre
 Instructor Led Training on your premises (members only)
 Blended learning (members only)

Requirements

 Passed the LEEA Foundation or previous Part 1 Entry (P1E) course

 You must be over 18 years old
 You must be employed by a LEEA member or registered with us as an Individual Train

(SUNAZ ODAKKAL; DEPUTY GENERAL MANAGER (OPERATION); [email protected]

https://leeaint.com/individual-trainee
LEEA

4. Lifting Machines Power [LMP] Advanced Programme

Description

Lifting Machines Power is an Advanced Programme which focuses on the inspection and thorough
examination of power operated lifting machines.

Duration

Instructor Led Training - 5 days

e-Learning - average 22 hours

Delegates

Maximum number for Instructor Led Training - 8 delegates

Course Contents

1. Legislation
2. Lifting Media - Chain
3. Lifting Media - Wire Rope
4. Load Hooks & Sheave Blocks
5. Suspension & Trollies
6. Principles of Electrical Machines
7. Principles of Pneumatic Machines
8. Power Supply Systems
9. Electric Chain Hoists
10. Electric Wire Rope Hoists
11. Pneumatic Hoists
12. Powered Winches
13. Brakes
14. Limit Switches - Over Travel
15. Overloading Protection - WLL
16. Overload Protection - Electrical
17. Safe Use of Powered Hoists

Delivery Options

 e-Learning
 Instructor Led Training at Huntingdon Training Centre
 Instructor Led Training on your premises (members only)
 Blended learning (members only)

Requirements

 Passed the LEEA Foundation or previous Part 1 Entry (P1E) course

 You must be over 18 years old
 You must be employed by a LEEA member or registered with us as an Individual Trainee

5. Overhead Travelling Cranes [OTC] Advanced Programme

Description

(SUNAZ ODAKKAL; DEPUTY GENERAL MANAGER (OPERATION); [email protected]

https://leeaint.com/individual-trainee
LEEA
Overhead Travelling Cranes is an Advanced Programme which focuses on the inspection and thorough
examination of overhead travelling cranes.

Duration

Instructor Led Training - 5 days

e-Learning - average 18 hours

Delegates

Maximum number for Instructor Led Training - 8 delegates

Course Contents

1. Legislation
2. Standards
3. Lifting Media – Load Chain
4. Lifting Media – Wire Rope
5. Materials
6. Crane Construction
7. Crane Configurations
8. End Carriages
9. Hoist Construction
10. Rope Drums & Pulleys
11. Power Feed Systems
12. Motion Limit Switches
13. Overload Devices
14. Braking Systems
15. Electric Motors and VFDs
16. Duty Classification
17. Safety Essentials when working on OTC
18. Testing as Part of the Thorough Examination
19. The Thorough Examination
20. Gantry Alignment

Delivery Options

 e-Learning
 Instructor Led Training at Huntingdon Training Centre
 Instructor Led Training on your premises (members only)
 Blended learning (members only)

Requirements

 Passed the LEEA Foundation or previous Part 1 Entry (P1E) course

 You must be over 18 years old
 You must be employed by a LEEA member or registered with us as an Individual Trainee

6. Offshore Container Examination [OCE] Advanced Programme

Description

(SUNAZ ODAKKAL; DEPUTY GENERAL MANAGER (OPERATION); [email protected]

https://leeaint.com/individual-trainee
LEEA
Offshore Container Examination is an Advanced Programme which focuses on the inspection and thorough
examination of offshore containers.

Duration

Instructor Led Training - 5 days

e-Learning - average 13 hours

Delegates

Maximum number for Instructor Led Training - 8 delegates

Course Contents

1. Legislation
2. Standards & Code of Practice
3. Terms, Definitions and Symbols
4. Design & Construction
5. Pad Eyes
6. Marking Requirements & Data Plates
7. Certification
8. Chain Slings
9. Steel Wire Rope Slings
10. Shackles
11. Lifting Set Design
12. Examination of Offshore Containers
13. Examination of Lifting Sets
14. Testing of Offshore Containers
15. Testing of Lifting Sets
16. Inspection Report Requirements
17. Pre-Trip Inspections

Delivery Options

 e-Learning
 Instructor Led Training at Huntingdon Training Centre
 Instructor Led Training on your premises (members only)
 Blended learning (members only)

Requirements

 Passed the LEEA Foundation or previous Part 1 Entry (P1E) course

 You must be over 18 years old
 You must be employed by a LEEA member or registered with us as an Individual Trainee

7. Runways & Crane Structures [RCS] Advanced Programme

Description

Runways & Crane Structures is an Advanced Programme which focuses on the inspection and thorough
examination of runways and crane structures.

Duration

(SUNAZ ODAKKAL; DEPUTY GENERAL MANAGER (OPERATION); [email protected]

https://leeaint.com/individual-trainee
LEEA
Instructor Led Training - 5 days

e-Learning - average 19 hours

Delegates

Maximum number for Instructor Led Training - 8 delegates

Course Contents

1. Legislation
2. Standards
3. Runways
4. Supporting Structures
5. Deflections & Measurements
6. Runway Beams with Cantilevers
7. Runway Beam Fixings – Bolted Connections
8. Welding of Structural Steel
9. Site Testing & Examination
10. Purpose Built Runways
11. Cranes & Components
12. Beam Clamps
13. Mobile Gantries
14. Swing Jib Cranes
15. Davits
16. Examination & Testing of Swing Jib Cranes
17. Power Feed Systems
18. Safety Essentials when Working on RCS

Delivery Options

 e-Learning
 Instructor Led Training at Huntingdon Training Centre
 Instructor Led Training on your premises (members only)
 Blended learning (members only)

Requirements

 Passed the LEEA Foundation or previous Part 1 Entry (P1E) course

 You must be over 18 years old
 You must be employed by a LEEA member or registered with us as an Individual Trainee

8. Mobile Crane Examination [MCE] Advanced Programme

This course is currently under development and the new version will be available in 2020.
 

The information below refers to the current course and will be updated when the new version launches.
 

Description

Mobile Crane Examination is an Advanced Programme which focuses on the inspection and thorough
examination of mobile cranes.

(SUNAZ ODAKKAL; DEPUTY GENERAL MANAGER (OPERATION); [email protected]

https://leeaint.com/individual-trainee
LEEA
Duration

Instructor Led Training - 7 days (split into two sessions with a break in between). 

e-Learning is under development and due to launch in 2020.

Delegates

Maximum number for Instructor Led Training - 6 delegates

Course Contents

1. Legislation
2. Standards and Codes of Practice
3. Health and Safety Requirements and Site Risk Assessments
4. Mobile Cranes (Development)
5. Thorough Examination – Statutory Requirements
6. Verification Methods and Equipment
7. Testing
8. Crane Types
9. Load Charts
10. Rated Capacity Indicators
11. Crane Signals
12. Conducting the Thorough Examination of Mobile Telescoping Cranes
13. Basic Hydraulic Systems for Mobile Telescoping Cranes
14. Thorough Examination of the Mobile Telescoping Crane Superstructure
15. Telescoping Booms
16. Limit Switches and Safety Devices
17. Wire Rope Examination
18. Reporting Procedures

The course is delivered in 2 sessions. Session 1 lasts 5 days and is followed by a weekend break. Session 2
lasts 2 days and includes a comprehensive practical evaluation and theory assessment. 

Delivery Options

 Instructor Led Training on your premises (members only)

More delivery options will be available when the new version of the course launches.

Requirements

 Passed the LEEA Foundation or previous Part 1 Entry (P1E) course

 You must be over 18 years old
 You must be employed by a LEEA member or registered with us as an Individual Trainee

(SUNAZ ODAKKAL; DEPUTY GENERAL MANAGER (OPERATION); [email protected]

https://leeaint.com/individual-trainee
LEEA

(SUNAZ ODAKKAL; DEPUTY GENERAL MANAGER (OPERATION); [email protected]

https://leeaint.com/individual-trainee
LEEA

[email protected]

(SUNAZ ODAKKAL; DEPUTY GENERAL MANAGER (OPERATION); [email protected]

https://leeaint.com/individual-trainee
LEEA

(SUNAZ ODAKKAL; DEPUTY GENERAL MANAGER (OPERATION); [email protected]

https://leeaint.com/individual-trainee
LEEA

(SUNAZ ODAKKAL; DEPUTY GENERAL MANAGER (OPERATION); [email protected]

https://leeaint.com/individual-trainee
LEEA

(SUNAZ ODAKKAL; DEPUTY GENERAL MANAGER (OPERATION); [email protected]

https://leeaint.com/individual-trainee
LEEA

(SUNAZ ODAKKAL; DEPUTY GENERAL MANAGER (OPERATION); [email protected]

https://leeaint.com/individual-trainee
LEEA

(SUNAZ ODAKKAL; DEPUTY GENERAL MANAGER (OPERATION); [email protected]