Scribd
Upload
115 views

PF Pump Specification: Stmdyne"

This document provides specifications for a STMDYNE PF pump assembly. It includes: 1. Test conditions for calibration fluid, calibrating pipes, injector, nozzle, and cam profile. 2. A list of 27 item parts that make up the pump assembly. 3. Application and service information including calibration specifications, dynamic flow rates, engine application, and phasing plate part numbers corresponding to camshaft rotation ranges.

Uploaded by

Miguel Rojas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
115 views

PF Pump Specification: Stmdyne"

This document provides specifications for a STMDYNE PF pump assembly. It includes: 1. Test conditions for calibration fluid, calibrating pipes, injector, nozzle, and cam profile. 2. A list of 27 item parts that make up the pump assembly. 3. Application and service information including calibration specifications, dynamic flow rates, engine application, and phasing plate part numbers corresponding to camshaft rotation ranges.

Uploaded by

Miguel Rojas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PAGE

STMDYNE” PF PUMP SPECIFICATION

EDITION: 3 PF PUMP ASSEMBLY NO.


APPLICATIONS: SEE PAGE 2 31503 (PFR2K85131503)
DATED: 05-I l-98 SUPERSEDES:
CUSTOMER: FAMOSA CUSTOMER PART NO. 18.281

TEST CONDITION 3. INJECTOR... IS0 7440


1. CALIBRATION FLUID...SAE J967 / IS0 4113 nop 24952538 psi (172-I 75 bar)
AT TEMPERATURE 102-I 04 “F (39-40 “C) 4. NOZZLE....ISO 4010
2. CALIBRATING HIGH PRESSURE PIPES... 0.078 X 23.6” 5. CAM PROFILE...788472
(2.0 X 600 mm) 6. INLET PRESSURE...l4.5 psi (1 .O bar)

ITEM PART
NO. I NO. QTY. DESCRIPTION

1 788434 2 HOLDER, delivery valve


torque to 40 - 45 N.m
2 788067 2 O-RING
3 31413 2 WASHER, sealing
788047 2 SPRING, valve
z 773286 2 WASHER, sealing
6 787923 2 VALVE, delivery (25 mm3)
7 787592 2 PLUNGER & BARREL ASSY
( 8.5 mm dia. L )
8 788538 1 NUT, clamp threaded
9 788368 1 HOUSING, pump
10 788402 1 RACK
11 34097 2 PIN, spring
12 788536 2 SLEEVE, metering
13 787431 2 SEAT, spring
14 788043 2 SPRING, tappet
15 SEE TABLE 2 PLATE, phasing
PAGE 2
16 787995 2 TAPPET ASSY, roller
17 788294 1 RING, snap
18 788143 2 PIN, tappet driving
19 31504 1 NAME, plate
20 772151 2 RIVET
21 788438 2 CAP
22 788144 2 PIN, barrel locating
23 788537 1 NUT, clamp
24 34098 1 SCREW
25 788073 3 GASKET
26 788116 1 CAP, threaded
27 788190 1 SCREW, inlet union
28 788078 1 GASKET
29 788114 1 SCREW

32315 ,I
FOR I NGINEERING USE ONLY

DATE !ZCNNO. FDITION


04-04-95 23674 1
04-08-98 26475 2
05-I I-98 2663OM 3
PAGE2

APPLICATIO U AND SERVICE INFORMATION


FOR U‘ MP ASSEMBLY31503

I CALIBRATION SPEC

RACK FROM DYNAMIC FLOW DIFF.IN DELIVERY


POS. “0”. mm3/STROKE BETWEEN ELEMENl

-2Smm * 74 -78 3.0mm3/STROKE


-5mm 20 - 29 3.5mm3/STROKE
TO MAX 95-105

* SElTlNG POINT ENGINE APPLICATIONS:


LIFT TO PORT CLOSURE: 2.90 - 2.30mm
D1260
(REF. TO B.D.C. DIMENSION)
LIFT 8.00mm

3._+_. DIRECTICN
CAMSHAFT
CF
RCTATICN

T
‘’ 1 awa. T
‘’ 1
788884¶-4.55-4.80
.-. 788%12>4.80-4.65
788772*4.65-4.70
7%8413*4.70-4.75
788731>4.75-4.80
4.25-4.30 788414>4.80-4.86
788733>4.85-4.90
78%446*4.QQ-4.96
788416tS.OO-5.05
78%41725.1Q-5.15
78%448*5.2O-5.25

You might also like