( No loading and unloading charges allowed for machinery loading and unloading )

(Lead)
charges
for trucks (Lead)
(Lead) (Lead)
and charges for
charges for charges for
trucks and (Lead) (Lead)
trucks and trucks and tippers for
Cement/ tippers per charges for charges
tippers for tippers for
cu.meter for trucks and for trucks
Earth / Sand Rubble/Size Steel/
Sl No. Distance PCC slabs/ tippers per and
/Gravel / stones/ Cut RCC Shahabad cu.meter for tippers for
Murrum/ Stones/ poles/ slabs/ CC &
water/ 1000 Bricks
Lime/ Coarse AC & GI
Laterite litres /1000 nos
Surki/ per aggregate sheets/
blocks/
cu.meter per cu.meter Packed
Wood/ cum
materials
/tonne

1 2 3 4 5 6 7 8
1 Lead up to 1 km 1 31.00 29.90 18.70 44.00 18.40 49.80
2 Lead up to 2 km 2 43.40 41.90 26.20 61.60 25.80 69.80
3 Lead up to 3 km 3 57.90 57.90 36.20 85.10 34.40 93.00
4 Lead up to 4 km 4 70.30 70.30 43.90 103.40 41.80 112.90
5 Lead up to 5 km 5 82.70 82.70 51.70 121.60 49.20 132.90
6 for Every km beyond 5 km up to 30 km 30 12.40 12.40 7.80 18.20 7.40 19.90
7 for Every km beyond 30 km 10000 10.30 10.30 6.50 15.20 6.10 16.60
 Rubble/ size
Earth / Sand stone/ cut
/Gravel stone/ Cement Bricks
Steel in
Sl No. Description of item Murrum/ / Coarse in Rs/1000
Rs/Tonne
Surki/ Rs / aggregate, Rs/Tonne Nos.
cum Lime in
Rs/cum

1 Loading 17.30 34.60 57.10 68.40 47.60

2 Unloading 8.65 17.30 57.10 68.40 47.60

A Name of the Work: Construction of ------------------------at ------------------- in
-----------------District

B Sources and Leads

Material Quarry Lead in KM
1 Cement
2 Steel
3 Sand for concrete ABCD 25.00
4 Sand for mortar, plastering ABCD 25.00
5 Sand for filling EFGH 25.00
6 Second Class Bricks IJKL 8.00
7 Fly ash bricks 290 x 225 x 140 MNOP 16.00
8 Fly ash bricks 290 x 100 x 140 MNOP 16.00
9 Fly ash bricks 225 x 100 x 60 MNOP 16.00
10 40mm HBG Metal Machine crushed QRST 34.00
11 20mm HBG Metal Machine crushed UVWX 34.00
12 12mm HBG Metal Machine crushed UVWX 34.00
13 10mm HBG Metal Machine crushed UVWX 34.00
14 6mm HBG Metal Machine crushed UVWX 34.00
15 Rough Stone OTG YZAB 8.00
16 Rough Stone HBG CDEF 15.00
17 Gravel GHIJ 7.00
18 Shahabad stone slabs KLMN 120.00
19 Kadapa stone slabs OPQR 274.00

C Cement & Steel Rates July, 2015

1 Cement 5740.00
2 Fe - 500 42000.00
3 Fe 415 41000.00
4 Mild Steel 42500.00
5 Structural Steel 42500.00
6 MS Flats 42000.00

D Allowances
1 Add for MA @ 25% 0.25
2 Overheads&Contractors Profit @13.615% 0.13615
Water charges
Type of Habitation 2 1 for Rural
2 for Urban
 Name of the Work: Construction of ------------------------at ------------------- in -----------------District

LEAD CHART (COMMON SoR 2015-2016) (Cement & Steel - July, 2015 rates)
Initial
Reference
S.No./ Cost Convey- MA
Sl. to SSR Lead in Loading Unloading
Description Source of Materials Item Code Unit excluding ance Total
No. page KM charges charges
No. seigniorage Charges
number
charges 25%
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
Ordinary Portland Cement 43 / 53 grade
1 1 MT 5740.00 50.26 12.57 5802.83
(including loading charges) Kadapa
2 Reinforcement steel Fe- 500 1 MT 42000.00 60.20 15.05 42075.25

3 Reinforcement steel Fe- 415 1 MT 41000.00 60.20 15.05 41075.25

4 Mild steel bars 1 MT 42500.00 60.20 15.05 42575.25

5 Structural steel 1 MT 42500.00 60.20 15.05 42575.25

6 MS flats 1 MT 42000.00 60.20 15.05 42075.25

27(a)
7 Sand (un-screened for concrete items) ABCD 202 1 Cum 25.00 610.00 263.79 873.79

Sand (screened for mortar, plastering 28

8 ABCD 202 25.00 677.00 263.79 940.79
items)
27(b)
9 Sand for filling EFGH 202 1 Cum 25.00 460.00 263.79 723.79

10 Common burnt clay bricks (23x11x7cm) IJKL 1 BMT-A.01 1000 Nos 8.00 5200.00 125.69 41.90 41.90 10.47 5419.96

Flyash cement / lime solid blocks (50 Kgs/

11 MNOP 1 BMT-A-10 1000 Nos 16.00 24000.00 1371.08 216.10 216.10 54.03 25857.31
sq.cm) 290mmx225mmx140mm
Flyash cement / lime solid blocks (50 Kgs/
12 MNOP 1 BMT-A-13 1000 Nos 16.00 11000.00 609.37 96.05 96.05 24.01 11825.47
sq.cm) 290mmx100mmx140mm

13 Aggregates 40mm nominal size (HBG) QRST 217 M - 055 1 Cum 34.00 845.00 355.59 1200.59

14 Aggregates 20mm nominal size (HBG) UVWX 217 M - 053 1 Cum 34.00 1365.00 355.59 vp 1720.59

Aggregates 13.20 / 12.50mm nominal

15 UVWX 217 M - 052 1 Cum 34.00 1097.00 355.59 1452.59
size (HBG)
 Initial
Reference
S.No./ Cost Convey- MA
Sl. to SSR Lead in Loading Unloading
Description Source of Materials Item Code Unit excluding ance Total
No. page KM charges charges
No. seigniorage Charges
number
charges 25%
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)
16 Aggregates 10mm nominal size (HBG) UVWX 216 M - 051 1 Cum 34.00 935.00 355.59 1290.59

17 Aggregates 6mm nominal size (HBG) UVWX 216 M - 050 1 Cum 34.00 735.00 355.59 1090.59

(Part II)
18 Rough Stone (OTG) YZAB Roads & 1 1 Cum 15.00 180.00 155.62 335.62
Bridges

(Part II)
19 Rough Stone (HBG) CDEF Roads & 12 1 Cum 15.00 252.00 155.62 407.62
Bridges

20 Gravel / Quarry spall GHIJ 214 M - 008 1 Cum 7.00 103.00 67.34 170.34

Polished Shahabad / Tandur stone slabs

21 KLMN 2 BMT-B-05 10 Sqm 120.00 1654.00 276.02 5.02 2.51 0.63 1938.19
15mm to 18mm thick

Polished black Kadapa slabs minimum of

22 OPQR 2 BMT-B-06 10 Sqm 274.00 1379.00 559.98 4.59 2.28 0.57 1946.42
15mm thick (0.457m x 0.457m)

High Polished Granite 16 to 18 mm thick

23 up to 8'-00 (2.43 M) other than black and 2 BMT-B-10 1 Sqm - 2767.00 2767.00
regular colours

High Polished Granite 16 to 18 mm thick

24 2 BMT-B-11 1 Sqm - 2352.00 2352.00
up to 8'-00 (2.43 M) black.
 CIVIL DATA : Page-14

D A T A ( SoR 2015-16)
Name of the Work: Construction of ------------------------at ------------------- in -----------------District

CEMENT MORTAR PER CUM CM (1:2) CM (1:3) CM (1:4) CM (1:5) CM (1:6) CM (1:8)
Cost of Sand for mortar & Plastering
( 1.05 cum ) 987.83 987.83 987.83 987.83 987.83 987.83

Cost of cement 4178.04 2785.36 2089.02 1671.22 1392.68 1044.51

Mazdoor ( Unskilled ) for mixing mortar
( 0.20 Nos.) 64.00 64.00 64.00 64.00 64.00 64.00

Add for MA @ 25% 16.00 16.00 16.00 16.00 16.00 16.00

Rate per Cum 5245.87 3853.19 3156.85 ### ### 2112.34

20 mm HBG graded metal

Arregates 20mm nominal size 0.60 1720.59 1032.35
Arregates 13.20 / 12.50mm nominal size 0.15 1452.59 217.89
Arregates 10mm nominal size 0.15 1290.59 193.59
Arregates 6mm nominal size 0.10 1090.59 109.06
Rate per Cum 1552.89

12 mm HBG graded metal

Arregates 13.20 / 12.50mm nominal size 0.60 1452.59 871.55
Arregates 10mm nominal size 0.20 1290.59 258.12
Arregates 6mm nominal size 0.20 1090.59 218.12

Rate per Cum 1347.79

DATA

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
1 Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of
unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual
premeasurements before dismantling including all labour charges , overheads & contractor profit etc.,
complete
a) Brick masonry
(BLD-CSTN-14-9/299)
Mazdoor(unskilled) 0.409 Nos. 320.00 1 Each 130.88
Add for MA @ 25% 0.25 130.88 32.72
Rate per 1 cum 163.60
Overheads&Contractors Profit @13.615% 0.13615 163.60 22.27
Rate per 1 cum 185.87
say 186

b) Unreinforced cement concrete up to 15cm thickness

(BLD-CSTN-14-8/296)
Mazdoor(unskilled) 2.44 Nos. 320.00 1 Each 780.80
Add for MA @ 25% 0.25 780.80 195.20
Rate per 1 cum 976.00
 CIVIL DATA : Page-15

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Overheads&Contractors Profit @13.615% 0.13615 976.00 132.88
Rate per 1 cum 1108.88
say 1109

c) Unreinforced cement concrete more than 15cm thickness

(BLD-CSTN-14-8/297)
Mazdoor(unskilled) 4.88 Nos. 320.00 1 Each 1561.60
Add for MA @ 25% 0.25 1561.60 390.40
Rate per 1 cum 1952.00
Overheads&Contractors Profit @13.615% 0.13615 1952.00 265.76
Rate per 1 cum 2217.76
say 2218

d) Reinforced cement concrete

(BLD-CSTN-14-8/298)
Mazdoor(unskilled) 4.32 Nos. 320.00 1 Each 1382.40
Add for MA @ 25% 0.25 1382.40 345.60
for cutting steel bars (BLD-CSTN-14-
10/300)
Blacksmith 2nd class 0.50 Nos. 375.00 1 Each 187.50
Mazdoor(Male) 0.50 Nos. 320.00 1 Each 160.00
Add for MA @ 25% 0.25 347.50 86.88
Rate per 1 cum 2162.38
Overheads&Contractors Profit @13.615% 0.13615 2162.38 294.41
Rate per 1 cum 2456.78
say 2457

e) Kadapa slabs or shahabad stone slabs on sand bed

Rate as per SSR 10.00 sqm 60.00 10 sqm 60.00
Add for MA @ 25% 0.25 60.00 15.00
Rate per 10 sqm 75.00
Rate per 1 sqm 7.50
Overheads&Contractors Profit @13.615% 0.13615 7.50 1.02
Rate per 1 sqm 8.52
say 9

f) Stone masonry in cement mortar

Rate as per SSR 1.00 cum 361.00 1 cum 361.00
Add for MA @ 25% 0.25 361.00 90.25
Rate per 1 cum 451.25
Overheads&Contractors Profit @13.615% 0.13615 451.25 61.44
Rate per 1 cum 512.69
say 513

g) Pan tiled or Mangalore tiled roof with out roof timbers :

Rate as per SSR 10.00 sqm 110.00 10 sqm 110.00
Add for MA @ 25% 0.25 110.00 27.50
Rate per 10 sqm 137.50
Rate per 1 sqm 13.75
Overheads&Contractors Profit @13.615% 0.13615 13.75 1.87
Rate per 1 sqm 15.62
say 16

h) Flat stone in roof or floors including lifting :

Rate as per SSR 10.00 sqm 130.00 10 sqm 130.00
 CIVIL DATA : Page-16

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Add for MA @ 25% 0.25 130.00 32.50
Rate per 10 sqm 162.50
Rate per 1 sqm 16.25
Overheads&Contractors Profit @13.615% 0.13615 16.25 2.21
Rate per 1 sqm 18.46
say 18

i) Wrought and framed timber in roofs or floors ;

Rate as per SSR S.No.826(BMT-S.06) 1.00 cum 188.00 1 cum 188.00
Add for MA @ 25% 0.25 188.00 47.00
Rate per 1 cum 235.00
Overheads&Contractors Profit @13.615% 0.13615 235.00 32.00
Rate per 1 cum 267.00
say 267

j) Old lime mortar plaster

Rate as per SSR 10.00 sqm 40.00 10 sqm 40.00
Add for MA @ 25% 0.25 40.00 10.00
Rate per 10 sqm 50.00
Rate per 1 sqm 5.00
Overheads&Contractors Profit @13.615% 0.13615 5.00 0.68
Rate per 1 sqm 5.68
say 6
k) Old cement mortar plaster
Rate as per SSR 10.00 sqm 50.00 10 sqm 50.00
Add for MA @ 25% 0.25 50.00 12.50
Rate per 10 sqm 62.50
Rate per 1 sqm 6.25
Overheads&Contractors Profit @13.615% 0.13615 6.25 0.85
Rate per 1 sqm 7.10
say 7

l) Clean removal of lime plaster from walls and raking out joints 20mm deep
or from terraced roof and raking out joints 100 mm deep
Rate as per SSR 10.00 sqm 40.00 10 sqm 40.00
Add for MA @ 25% 0.25 40.00 10.00
Rate per 10 sqm 50.00
Rate per 1 sqm 5.00
Overheads&Contractors Profit @13.615% 0.13615 5.00 0.68
Rate per 1 sqm 5.68
say 6

m) Clean removal of cement plaster from walls and raking out joint 200 mm deep
Rate as per SSR 10.00 sqm 50.00 10 sqm 50.00
Add for MA @ 25% 0.25 50.00 12.50
Rate per 10 sqm 62.50
Rate per 1 sqm 6.25
Overheads&Contractors Profit @13.615% 0.13615 6.25 0.85
Rate per 1 sqm 7.10
say 7
 CIVIL DATA : Page-17

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
2 Dismantling doors , windows and clear storey windows, Ventilators etc., ( wood or steel ) shutters
including Chowkhats , architraves,hold fasts and other attachments etc., and stacking them within 100m
lead including labour charge etc., and overheads & contractors profit complete for finished item of work

(BLD-CSTN-14-11)
a) Not exceeding 3 sqm in area :
Details of cost per each :
2nd class mason 0.10 Nos. 375.00 1 No. 37.50
Mazdoor(Male) 0.20 Nos. 320.00 1 No. 64.00
2nd class Blacksmith 0.05 Nos. 375.00 1 No. 18.75
Add for MA @ 25% 0.25 120.25 30.06
150.31
Overheads&Contractors Profit @13.615% 0.13615 150.31 20.47
Cost per each 170.78
Say 171

b) Exceeding 3 sqm in area :

Details of cost per each :
2nd class mason 0.13 Nos. 375.00 1 No. 48.75
Mazdoor(Male) 0.27 Nos. 320.00 1 No. 86.40
2nd class Blacksmith 0.07 Nos. 375.00 1 No. 26.25
Add for MA @ 25% 0.25 161.40 40.35
201.75
Overheads&Contractors Profit @13.615% 0.13615 201.75 27.47
Cost per each 229.22
Say 229

3 Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound
wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including
all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads
& contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20
B(APSS 308)

(BLD-CSTN-2-1)
Ordinary Soil - Manual Means up to 3m depth
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
Mazdoor ( Unskilled) 3.64 Nos. 320.00 1 No. 1164.80
Add for MA @ 25% 0.25 1164.80 291.20
1456.00
b&c)
Overheads&Contractors Profit @13.615% 0.13615 1456.00 198.23
Cost for 10 cum ( a+b+c) 1654.23
Rate per cum (a+b+c) / 10 165.42
Rate per 1 cum Say 165

4 Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound
wall in ordinary soils and depositing on bank with an initial lead of 10m and 1m additional lift charges
over the initial depth up to 3m including all operational,incidental, labour charges such as shoring,
sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work
excluding dewatering charges etc., as per SS 20 B(APSS 308)
(BLD-CSTN-2-1& COM-LDLFT-6-66)
Rate with initial lead & lift 1.00 cum 165.42 1 cum 165.42
Mazdoor for extra lift ( 1 No. for 60m) 0.02 Nos. 320.00 1 Each 6.40
 CIVIL DATA : Page-18

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Add for MA @ 25% 0.25 6.40 1.60
Overheads&Contractors Profit @13.615% 0.13615 8.00 1.09
Rate per 1 cum 174.51
Say 175

5 Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and
depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all
operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20
B(APSS 308)

(BLKD-CSTN-2-2)
Ordinary Soil - Mechanical Means up to 3m depth
Unit : 1 cum
Taking output : 240.00 cum
a) Labour
Mazdoor ( Unskilled) 8.32 Nos. 320.00 1 No. 2662.40
Add for MA @ 25% 0.25 2662.40 665.60
b) Machinery
Shovel 0.85 cum 110hp 6.00 hours 2568.70 1 Hour 15412.20
Crew charges 6.00 hours 222.30 1 Hour 1333.80
Add MA on crew charges 0.25 1333.80 333.45
20407.45
c&d)
Overheads&Contractors Profit @13.615% 0.13615 20407.45 2778.47
Cost for 240 cum ( a+b+c+d) 23185.92
Rate per 1 cum (a+b+c+d) / 240 96.61
Say 97

6 Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and
depositing on bank for all lifts and with an initial lead of 10m and 3m to 6m depth including all
operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20
B(APSS 308)

(BLKD-CSTN-2-3)
Ordinary Soil - Mechanical Means up to 3m to 6m depth
Unit : 1 cum
Taking output : 210.00 cum
a) Labour
Mazdoor ( Unskilled) 8.32 Nos. 320.00 1 No. 2662.40
Add for MA @ 25% 0.25 2662.40 665.60
b) Machinery
Shovel 0.50cum 75hp 6.00 hours 2568.70 1 Hour 15412.20
Crew charges 6.00 hours 222.30 1 Hour 1333.80
Add MA on crew charges 0.25 1333.80 333.45
20407.45
c&d)
Overheads&Contractors Profit @13.615% 0.13615 20407.45 2778.47
Cost for 210 cum ( a+b+c+d) 23185.92
Rate per 1 cum (a+b+c+d) / 210 110.41
Rate per 1 cum Say 110
 CIVIL DATA : Page-19

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
7 Earth work excavation for foundations (Manual Means) of buildings in ordinary rock ( not requiring
blasting ) and depositing on bank with an initial lead of 10m and depth up to 3m including all
operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20
B(APSS 308)

(BLD-CSTN-2-4)
Ordinary rock(not requiring blasting) - Manual Means up to 3m depth
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
Mazdoor ( Unskilled) 5.20 Nos. 320.00 1 No. 1664.00
Add for MA @ 25% 0.25 1664.00 416.00
2080.00
b&c)
Overheads&Contractors Profit @13.615% 0.13615 2080.00 283.19
Cost for 10 cum ( a+b+c) 2363.19
Rate per 1 cum (a+b+c) / 10 236.32
Rate per 1 cum Say 236

8 Earth work excavation for foundations (Mechanical Means) for buildings in ordinary rock (not
requiring blasting) and depositing on bank for all lifts and with an initial lead of 10m and up to 3m
depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting
etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges
etc., as per SS 20 B(APSS 308)

(BLKD-CSTN-2-5)
Ordinary rock(not requiring blasting)- Mechanical Means up to 3m depth
Unit : 1 cum
Taking output : 180.00 cum
a) Labour
Mazdoor ( Unskilled) 6.24 Nos. 320.00 1 No. 1996.80
Add for MA @ 25% 0.25 1996.80 499.20
b) Machinery
Shovel 0.50cum 75hp 6.00 hours 2568.70 1 Hour 15412.20
Crew charges 6.00 hours 222.30 1 Hour 1333.80
Add MA on crew charges 0.25 1333.80 333.45
19575.45
c&d)
Overheads&Contractors Profit @13.615% 0.13615 19575.45 2665.20
Cost for 180 cum ( a+b+c+d) 22240.65
Rate per 1 cum (a+b+c+d) / 180 123.56
Rate per 1 cum Say 124

9 Earth work excavation for foundations for buildings in hard rock (requiring blasting) and depositing
on bank for all lifts and with an initial lead of 10m and up to 3m depth including all
operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20
B(APSS 308)
(BLKD-CSTN-2-6)
Hard rock (requiring blasting)- up to 3m depth
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
Driller 0.50 Nos. 420.00 1 No. 210.00
Blaster 0.25 Nos. 480.00 1 No. 120.00
 CIVIL DATA : Page-20

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Mazdoor ( Unskilled) 8.35 Nos. 320.00 1 No. 2672.00
Add for MA @ 25% 0.25 3002.00 750.50
b) Machinery
Air compressor 7cmm (diesel) 1.00 hour 946.70 1 Hour 946.70
Jack hammer/Pneumatic braker 2.00 hours 19.80 1 Hour 39.60
Crew charges
Air compressor 1.00 Hours 198.40 1 Hour 198.40
Jack hammer/Pneumatic braker 2.00 Hours 310.10 1 Hour 620.20
Add MA on crew charges 0.25 818.60 204.65
c)Material
Gelatin 80% 3.50 Kgs 73.00 1 Kg 255.50
Detonator electric 14 Nos. 13.00 1 No. 182.00
6199.55
c&d)
Overheads&Contractors Profit @13.615% 0.13615 6199.55 844.07
Cost for 10 cum ( a+b+c+d) 7043.62
Rate per 1 cum (a+b+c+d) / 10 704.36
Rate per 1 cum Say 704

10 Earth work excavation for foundations for buildings in hard rock (blasting prohibited) and depositing
on bank for all lifts and with an initial lead of 10m and up to 3m depth including all
operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads &
contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20
B(APSS 308)
(BLKD-CSTN-2-7)
Hard rock (blasting prohibited)- up to 3m depth
Unit : 1 cum
Taking output : 10.00 cum
a) Labour
Mazdoor ( Unskilled) 5.20 Nos. 320.00 1 No. 1664.00
Add for MA @ 25% 0.25 1664.00 416.00
b) Machinery
Air compressor 6.00 Hours 946.70 1 Hour 5680.20
Jack hammer/Pneumatic braker 12.00 Hours 19.80 1 Hour 237.60
Crew charges
Air compressor 6.00 Hours 198.40 1 Hour 1190.40
Jack hammer/Pneumatic braker 12.00 Hours 310.10 1 Hour 3721.20
Add MA on crew charges 0.25 4911.60 1227.90
14137.30
c&d)
Overheads&Contractors Profit @13.615% 0.13615 14137.30 1924.79
Cost for 10 cum ( a+b+c+d) 16062.09
Rate per 1 cum (a+b+c+d) / 10 1606.21
Rate per 1 cum Say 1606

11 Conveyance of un-useful excavated earth to a distance of 5 KM for disposal including hire charges of
T & P, labour charges etc., and overheads & contractors profit complete for finished item of work.
Rate as per SoR 1 cum 82.70 1 cum 82.70
Rate per 1 cum Say 83
 CIVIL DATA : Page-21

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
12 Providing anti termite treatment as per IS 6315 (Part-2) 2001 (pre-constructional chemical treatment
measures) along the internal & external vertical faces of the columns, plinth beams, basement and top
surface of the basement filling below flooring bed as per the specified procedure confirming to IS 6315
(Part-2) 2001 and other relevent approved specification duly using Chlorpyriphos / Lindane emulsifiable
concentrate 20% with 1% concentration @ 7.5 Liters/sqm of the vertical surface & 5.0 Liters/sqm of the
horizontal surface of the substructure to a depth of 500mm around columns & 300mm deep around plinth
beams, basements & floor filling area including excavation channel along the wall & rodding etc & cost &
conveyane of all materials to the site, cost of labour for spraying, rodding etc complete for finished item of
work as per the approval of the Engineer-in-Charge. ( The rate includes overheads & contractors profit )

(BLD-CSTN-16-1)
Unit : 10sqm
A)Materials
Chloropyriphos Lindane Emulsifiable
concentrate of 20% 4.51 Ltrs 228.00 1 Ltr 1028.28
B)Water charges 1% 0.01 1028.28 10.28
C)Labour charges
Man Mazdoor 3.00 Nos. 320.00 1 No. 960.00
Sprayer 0.22 Nos. 375.00 1 No. 82.50
Add for MA @ 25% 0.25 1042.50 260.63
2341.69
D)Hire charges
Sprayer , drilling machine etc., 10% 0.10 2341.69 234.17
Sundries and contingencies 3% 0.03 2341.69 70.25
Water charges&Electricity 1.50% 0.015 2341.69 35.13
2681.23
Overheads&Contractors Profit @13.615% 0.13615 2681.23 365.05
Rate per 10 sqm 3046.28
Rate per 1 sqm 305

13 Filling with carted coarse sand in trenches,sides of foundations and basement with initial lead in layers
not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and
all peraitonal,incidental ,labour charges,hire charges of T&P etc., and overheads & contractors profit
complete for fnished item of work(APSS NO.309&310)

(BLD-CSTN-2-8) & Amendment in page 12 of SoR 2014.15

Unit : 1 cum
Taking output = 1 cum
a) Labour
Mazdoor ( Unskilled ) 0.31 Nos. 320.00 1 No. 99.20
Add for MA @ 25% 0.25 99.20 24.80
b)Material :
Coarse sand for filling 1.00 cum 723.79 1 cum 723.79
Water 0.10 Kl 103.00 1 Kl 10.30
858.09
Overheads&Contractors Profit @13.615% 0.13615 858.09 116.83
Rate per 1 cum 974.92
Say 975

14 Filling with carted gravel in trenches,sides of foundations and basement with initial lead in layers not
exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all
peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete
for fnished item of work(APSS NO.309&310)
(BLD-CSTN-2-8) & Amendment in page 12 of SoR 2014.15
Unit : 1 cum
Taking output = 1 cum
 CIVIL DATA : Page-22

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
a) Labour
Mazdoor ( Unskilled ) 0.31 Nos. 320.00 1 No. 99.20
Add for MA @ 25% 0.25 99.20 24.80
b)Material :
Gravel 1.00 cum 170.34 1 cum 170.34
Water 0.72 Kl 103.00 1 Kl 74.16
368.50
Overheads&Contractors Profit @13.615% 0.13615 368.50 50.17
Rate per 1 cum 418.67
Say 419

15 Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of
foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming
including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire
charges of T&P etc., and overheads & contractors profit complete for fnished item of work (APSS
NO.309&310)

(BLD-CSTN-2-9) & Amendment in page 13 of SoR 2014.15

Unit : 1 cum
Taking output : 6.00 cum
a) Labour
Mazdoor ( Unskilled ) 3.12 Nos. 320.00 1 No. 998.40
Add for MA @ 25% 0.25 998.40 249.60
1248.00
Water 0.72 Kl 103.00 1 Kl 74.16
Rate per 6 cum (a+b+c) 1322.16
Overheads&Contractors Profit @13.615% 0.13615 1322.16 180.01
1502.17
Rate per 1 cum 250.36
Say 250

16 Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under
flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved
quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to
site, including sales & other taxes on all materials and including all charges for machine mixing, laying
concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the
required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No.
402)
(BLD-CSTN-3-5)
Unit : 1 cum
A.MATERIALS :
Cement 162.00 Kgs 5802.83 1000 Kgs 940.06
Coarse aggregate 40mm 0.90 Cum 1200.59 1 Cum 1080.53
Fine aggregate ( Sand ) 0.45 Cum 873.79 1 Cum 393.21
Water (including curing) 1.20 kl 103.00 1 kl 123.60
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 131.90 1 hour 131.90
Crew charges 1.00 hour 206.70 1 hour 206.70
Add MA on crew charges 0.25 206.70 51.68
C.LABOUR :
1st class mason 0.10 Nos. 420.00 1 Each 42.00
Mazdoor (unskilled) 1.39 Nos. 320.00 1 Each 444.80
Add for MA @ 25% 0.25 486.80 121.70
3536.17
 CIVIL DATA : Page-23

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Overheads&Contractors Profit @13.615% 0.13615 3536.17 481.45
Rate per 1 cum 4017.62
Say 4018

17 Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) for foundations and
under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from
approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water
etc. to site, sales & other taxes on all materials and including all charges for machine mixing, laying
concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the
required level curing etc.,and overheads & contractors profit complete for finished item of work. (APSS No.
402)

(BLD-CSTN-3-7)
Unit : 1 cum
A.MATERIALS :
Cement 129.60 Kgs 5802.83 1000 Kgs 752.05
Coarse aggregate 40mm 0.90 Cum 1200.59 1 Cum 1080.53
Fine aggregate ( Sand ) 0.45 Cum 873.79 1 Cum 393.21
Water (including curing) 1.20 kl 103.00 1 kl 123.60
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 131.90 1 hour 131.90
Crew charges 1.00 hour 206.70 1 hour 206.70
Add MA on crew charges 0.25 206.70 51.68
C.LABOUR :
1st class mason 0.10 Nos. 420.00 1 Each 42.00
Mazdoor (unskilled) 1.39 Nos. 320.00 1 Each 444.80
Add for MA @ 25% 0.25 486.80 121.70
3348.16
Overheads&Contractors Profit @13.615% 0.13615 3348.16 455.85
Rate per 1 cum 3804.01
Say 3804

18 Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard other than
granite stones carted from approved quarry including cost and conveyance of all materials like cement,
screened sand, water, stones etc., from approved quarry, to site, sales & other taxes on all materials
including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction,
curing etc.,and overheads & contractors profit complete for finished item of work in foundation and
basement. (APSS No. 601 & 615)

( BLD-CSTN-6-13 )
Unit = 1 cum
A.MATERIALS
Cement 59.40 Kgs 5802.83 1000 Kgs 344.69
Rough stone (OTG) 1.10 Cum 335.62 1 Cum 369.18
Fine aggregate(sand) 0.33 Cum 940.79 1 Cum 310.46
B) LABOUR
1st class mason 1.20 Nos. 420.00 1 Each 504.00
Mazdoor (unskilled) 2.00 Nos. 320.00 1 Each 640.00
Add for MA @ 25% 0.25 1144.00 286.00
2454.33
Add water charges 0.01 2454.33 24.54
2478.87
Overheads&Contractors Profit @13.615% 0.13615 2478.87 337.50
 CIVIL DATA : Page-24

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Rate per 1 cum 2816.37
Say 2816

19 Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard granite stones
carted from approved quarry including cost and conveyance of all materials like cement, screened sand,
water, stones etc., from approved quarry, to site, sales & other taxes on all materials including labour for
cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc.,and
overheads & contractors profit complete for finished item of work in foundation and basement. (APSS
No. 601 & 615)

( BLD-CSTN-6-13 )
Unit = 1 cum
A.MATERIALS
Cement 59.40 Kgs 5802.83 1000 Kgs 344.69
Rough stone (HBG) 1.10 Cum 407.62 1 Cum 448.38
Fine aggregate(sand) 0.33 Cum 940.79 1 Cum 310.46
B) LABOUR
1st class mason 1.20 Nos. 420.00 1 Each 504.00
Mazdoor (unskilled) 2.00 Nos. 320.00 1 Each 640.00
Add for MA @ 25% 0.25 1144.00 286.00
2533.53
Add water charges 0.01 2533.53 25.34
2558.87
Overheads&Contractors Profit @13.615% 0.13615 2558.87 348.39
Rate per 1 cum 2907.26
Say 2907

20 Vibrated Plain Cement Concrete (1:3:6) nominal mix using 40mm size machine crushed hard granite
metal and 20mm graded machine crushed hard granite metal (coarse aggregate) in (2:1) ratio from
approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse
aggregate, water etc. to site, sales & other taxes on all materials, all charges for mixing, laying concrete in
position, vibrating, curing, centering charges, overheads & contractors profit etc.,for finished item of work
for footings and basement .
(BLD-CSTN-3-10 & 11)
Unit : 1cum
A.MATERIALS :
HBG 40mm size metal 0.60 Cum 1200.59 1 Cum 720.35
HBG 20mm size graded metal 0.30 Cum 1552.89 1 Cum 465.87
Sand 0.45 Cum 873.79 1 Cum 393.21
Cement 220.00 Kgs 5802.83 1 MT 1276.62
Water ( including for curing ) 1.20 Kl 103.00 1 Kl 123.60
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 131.90 1 hour 131.90
Crew Charges 1.00 hour 206.70 1 hour 206.70
Add MA on crew charges 0.25 206.70 51.68
Needle vibrator 40mm ( petrol ) 1.00 hours 26.60 1 hour 26.60
Crew charges 1.00 hours 148.80 1 hour 148.80
Add MA on crew charges 0.25 148.80 37.20
C.LABOUR :
1st class mason 0.10 Nos. 420.00 1 Each 42.00
Mazdoor (Unskilled) 1.39 Nos. 320.00 1 Each 444.80
Add for MA @ 25% 0.25 486.80 121.70
Rate for 1 cum 4191.02
Centering & Scaffolding (Hire) 1.00 Cum 61.00 1 Cum 61.00
 CIVIL DATA : Page-25

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Centering & Scaffolding (Labour) 1.00 Cum 244.00 1 Cum 244.00
Add for MA @ 25% 0.25 244.00 61.00
4557.02
Overheads&Contractors Profit @13.615% 0.13615 4557.02 620.44
Rate per 1 cum 5177.46
Say 5177

21 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum
cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size
graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1
to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site and sales & other taxes on all materials , centering using Steel
scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all
operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing
etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for
finished item of work (APSS No. 402)

(BLD-CSTN-3-14)
FOUNDATIONS , PLINTH , PEDESTALS ( Below Plinth)
A.MATERIALS :
Cement 380.00 Kgs 5802.83 1000 Kgs 2205.08
20mm HBG graded metal 0.80 Cum 1552.89 1 Cum 1242.31
Sand 0.40 Cum 873.79 1 Cum 349.52
B.LABOUR :
1st class Mason 0.133 Nos 420.00 1 Each 55.86
2nd class Mason 0.267 Nos 375.00 1 Each 100.13
Mazdoor (both men&women) 4.60 Nos 320.00 1 Each 1472.00
Add for MA @ 25% 0.25 1627.99 407.00
C.MACHINERY :
Batching plant 0.50 cum 1.333 hours 236.80 1 hour 315.65
Crew charges 1.333 hours 320.00 1 hour 426.56
Needle vibrator 40mm ( petrol ) 1.333 hours 26.60 1 hour 35.46
Crew charges 1.333 hours 148.80 1 hour 198.35
Add MA on crew charges 0.25 624.91 156.23
Water(including for curing) 1.20 kl 103.00 1 kl 123.60
Rate per 1 cum 7087.73

a Footings
Rate for Design mix M 25 1.00 Cum 7087.73 1 Cum 7087.73
Hire charges of centering and scaffolding 1.00 Cum 277.00 1 Cum 277.00
Labour charges 1.00 Cum 473.00 1 Cum 473.00
Add for MA @ 25% 0.25 473.00 118.25
7955.98
Overheads&Contractors Profit @13.615% 0.13615 7955.98 1083.21
Rate per 1 cum 9039.19
Say 9039

b Column pedestals
Rate for Design mix M 25 1.00 Cum 7087.73 1 Cum 7087.73
Hire charges of centering and scaffolding 1.00 Cum 315.00 1 Cum 315.00
Labour charges 1.00 Cum 753.00 1 Cum 753.00
Add for MA @ 25% 0.25 753.00 188.25
8343.98
Overheads&Contractors Profit @13.615% 0.13615 8343.98 1136.03
 CIVIL DATA : Page-26

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Rate per 1 cum 9480.02
Say 9480

c Plinth Beams
Rate for Design mix M 25 1.00 Cum 7087.73 1 Cum 7087.73
Hire charges of centering and scaffolding 1.00 Cum 667.50 1 Cum 667.50
Labour charges 1.00 Cum 570.50 1 Cum 570.50
Add for MA @ 25% 0.25 570.50 142.63
8468.36
Overheads&Contractors Profit @13.615% 0.13615 8468.36 1152.97
Rate per 1 cum 9621.33
Say 9621

d Base slab 230mm thick for Sump / Septic tank :

Rate for Design mix M 25 0.23 Cum 7087.73 1 Cum 1630.18
Hire charges of centering and scaffolding 0.23 Cum 277.00 1 Cum 63.71
Labour charges 0.23 Cum 473.00 1 Cum 108.79
Add for MA @ 25% 0.25 108.79 27.20
1829.88
Overheads&Contractors Profit @13.615% 0.13615 1829.88 249.14
Rate per 1 sqm 2079.01
Say 2079

22 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum
cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size
graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1
to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using
Casurina Ballies, Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc., including all
operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete
manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel
and its fabrication charges for finished item of work (APSS No. 402)

(BLD-CSTN-3-15)
COLUMNS, LINTELS, WATER TANKS, RCC WALL IN BUILDINGS:
A.MATERIALS :
Cement 380.00 Kgs 5802.83 1000 Kgs 2205.08
20mm HBG graded metal 0.80 Cum 1552.89 1 Cum 1242.31
Sand 0.40 Cum 873.79 1 Cum 349.52
B.LABOUR :
1st class Mason 0.167 Nos 420.00 1 Each 70.14
2nd class Mason 0.167 Nos 375.00 1 Each 62.63
Mazdoor (both men&women) 5.60 Nos 320.00 1 Each 1792.00
Add for MA @ 25% 0.25 1924.77 481.19
C.MACHINERY :
Batching plant 0.50 cum 1.333 hours 236.80 1 hour 315.65
Crew charges 1.333 hours 320.00 1 hour 426.56
Needle vibrator 40mm ( petrol ) 1.333 hours 26.60 1 hour 35.46
Crew charges 1.333 hours 148.80 1 hour 198.35
Add MA on crew charges 0.25 624.91 156.23
Water(including for curing) 1.20 kl 103.00 1 kl 123.60
Rate per 1 cum 7458.71

a) COLUMNS :
un supported height up to 3.66 m
 CIVIL DATA : Page-27

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Rate for other Floors FF SF TF
Rate as above 7458.71 7458.71 7458.71
Hire charges of centering and scaffolding 229.00 229.00 229.00
Labour charges 1338.00 1472.00 1606.00
Add for MA @ 25% 334.50 368.00 401.50
Lift charges of materials(Manual) 0.00 192.48 384.95
Add for MA @ 25% 0.00 48.12 96.24
Rate per 1 cum 9360.21 9768.31 10176.40
Overheads&Contractors Profit @13.615% 1274.39 1329.95 1385.52
Rate per 1 cum 10634.60 11098.26 11561.92
Say 10635 11098 11562

b) LINTELS :
Rate for other Floors FF SF TF
Rate as above 7458.71 7458.71 7458.71
Hire charges of centering and scaffolding 760.00 760.00 760.00
Labour charges 953.00 1048.00 1144.00
Add for MA @ 25% 238.25 262.00 286.00
Lift charges of materials(Manual) 0.00 192.48 384.95
Add for MA @ 25% 0.00 48.12 96.24
Rate per 1 cum 9409.96 9769.31 10129.90
Overheads&Contractors Profit @13.615% 1281.17 1330.09 1379.19
Rate per 1 cum 10691.13 11099.40 11509.09
Say 10691 11099 11509

c) WATER TANKS, SUMP, LIFT :

150mm thick side walls
Cost of M 25 design mix 0.15 cum 7458.71 1.00 cum 1118.81

Rate for other Floors FF SF TF

Rate as above 1118.81 1118.81 1118.81
Hire charges of centering and scaffolding 876.00 876.00 876.00
Lift charges of materials(Manual) 0.00 28.87 57.74
Add for MA @ 25% 0.00 7.22 14.44
Rate per 10 sqm 1994.81 2030.90 2066.99
Overheads&Contractors Profit @13.615% 271.59 276.51 281.42
Rate per 1 sqm 2266.40 2307.41 2348.41
Say 2266 2307 2348

d) 200mm thick side walls

Cost of M 25 design mix 0.20 cum 7458.71 1.00 cum 1491.74

Rate for other Floors FF SF TF

Rate as above 1491.74 1491.74 1491.74
Hire charges of centering and scaffolding 876.00 876.00 876.00
Labour charges 0.00 0.00 0.00
Add for MA @ 25% 0.00 0.00 0.00
Lift charges of materials(Manual) 0.00 38.50 76.99
Add for MA @ 25% 0.00 9.62 19.25
Rate per 10 sqm 2367.74 2415.86 2463.98
Overheads&Contractors Profit @13.615% 322.37 328.92 335.47
Rate per 1 sqm 2690.11 2744.78 2799.45
Say 2690 2745 2799
 CIVIL DATA : Page-28

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
23 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum
cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size
graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to
Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site and sales & other taxes on all materials , centering using
Casurina Ballies , Bamboos , Wooden Reapers , Runners , Wood Posts , Wall Plates etc., including all
operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete
manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel
and its fabrication charges for finished item of work (APSS No. 402)

(BLD-CSTN-3-16)
RCC SLABS , BEAMS :
A.MATERIALS :
Cement 380.00 Kgs 5802.83 1000 Kgs 2205.08
20mm HBG graded metal 0.80 Cum 1552.89 1 Cum 1242.31
Sand 0.40 Cum 873.79 1 Cum 349.52
B.LABOUR :
1st class Mason 0.067 Nos 420.00 1 Each 28.14
2nd class Mason 0.133 Nos 375.00 1 Each 49.88
Mazdoor (both men&women) 3.077 Nos 320.00 1 Each 984.64
Add for MA @ 25% 0.25 1062.66 265.66
C.MACHINERY :
Batching plant 0.50 cum 0.308 hours 236.80 1 hour 72.93
Crew charges 0.308 hours 320.00 1 hour 98.56
Needle vibrator 40mm ( petrol ) 0.308 hours 26.60 1 hour 8.19
Crew charges 0.308 hours 148.80 1 hour 45.83
Add MA on crew charges 0.25 144.39 36.10
Water(including for curing) 1.20 kl 103.00 1 kl 123.60
Rate per 1 cum 5510.44

A) BEAMS :
un supported height up to 3.66 m
Rate for other Floors FF SF TF
Rate as above 5510.44 5510.44 5510.44
Hire charges of centering and scaffolding 1342.00 1342.00 1342.00
Labour , lift charges for scaffolding 1122.00 1234.00 1346.00
Add for MA @ 25% 280.50 308.50 336.50
Lift charges of materials(Manual) 0.00 106.27 212.53
Add for MA @ 25% 0.00 26.57 53.13
Rate for 1 cum 8254.94 8527.77 8800.60
Overheads&Contractors Profit @13.615% 1123.91 1161.06 1198.2
Rate per 1 cum 9378.85 9688.83 9998.80
Say 9379 9689 9999

B) RCC SLABS :
a) Roof Slabs 115mm thick :
un supported height up to 3.66 m
Rate for Design mix M 25 0.115 Cum 5510.44 1 Cum 633.70

Rate for other Floors FF SF TF

Rate as above 633.70 633.70 633.70
Hire charges of centering and scaffolding 152.00 152.00 152.00
Labour , lift charges for scaffolding 127.00 140.00 152.00
Add for MA @ 25% 31.75 35.00 38.00
Lift charges of materials(Manual) 0.00 12.22 24.44
 CIVIL DATA : Page-29

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Add for MA @ 25% 0.00 3.06 6.11
Rate per 1 sqm 944.45 975.98 1006.25
Overheads&Contractors Profit @13.615% 128.59 132.88 137
Rate per 1 sqm 1073.04 1108.86 1143.25
Say 1073 1109 1143

b) Roof Slabs 125mm thick :

un supported height up to 3.66 m
Rate for Design mix M 25 0.125 Cum 5510.44 1 Cum 688.80

Rate for other Floors FF SF TF

Rate as above 688.80 688.80 688.80
Hire charges of centering and scaffolding 152.00 152.00 152.00
Labour , lift charges for scaffolding 127.00 140.00 152.00
Add for MA @ 25% 31.75 35.00 38.00
Lift charges of materials(Manual) 0.00 13.28 26.57
Add for MA @ 25% 0.00 3.32 6.64
Rate per 1 sqm 999.55 1032.41 1064.01
Overheads&Contractors Profit @13.615% 136.09 140.56 144.87
Rate per 1 sqm 1135.64 1172.97 1208.88
Say 1136 1173 1209

c) Roof Slabs 150mm thick :

Rate for Design mix M 25 0.15 Cum 5510.44 1 Cum 826.57

un supported height up to 3.66 m

Rate for other Floors FF SF TF
Rate as above 826.57 826.57 826.57
Hire charges of centering and scaffolding 152.00 152.00 152.00
Lift charges for scaffolding 127.00 140.00 152.00
Add for MA @ 25% 31.75 35.00 38.00
Lift charges of materials(Manual) 0.00 15.94 31.88
Add for MA @ 25% 0.00 3.98 7.97
Rate per 1 sqm 1137.32 1173.49 1208.42
Overheads&Contractors Profit @13.615% 154.85 159.77 164.53
Rate per 1 sqm 1292.17 1333.26 1372.95
Say 1292 1333 1373

d) Roof Slabs 175mm thick :

Rate for Design mix M 25 0.175 Cum 5510.44 1 Cum 964.33

for un supported height of 3.66 m

Rate for other Floors FF SF TF
Rate as above 964.33 964.33 964.33
Hire charges of centering and scaffolding 156.00 156.00 156.00
Labour , lift charges for scaffolding 131.00 144.00 157.00
Add for MA @ 25% 32.75 36.00 39.25
Lift charges of materials(Manual) 0.00 18.60 37.19
Add for MA @ 25% 0.00 4.65 9.30
Rate per 1 sqm 1284.08 1323.57 1363.07
Overheads&Contractors Profit @13.615% 174.83 180.2 185.58
Rate per 1 sqm 1458.91 1503.77 1548.65
Say 1459 1504 1549
 CIVIL DATA : Page-30

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
e) Roof Slabs 200mm thick :
Rate for Design mix M 25 0.20 Cum 5510.44 1 Cum 1102.09

for un supported height of 3.66 m

Rate for other Floors FF SF TF
Rate as above 1102.09 1102.09 1102.09
Hire charges of centering and scaffolding 156.00 156.00 156.00
Labour , lift charges for scaffolding 131.00 144.00 157.00
Add for MA @ 25% 32.75 36.00 39.25
Lift charges of materials(Manual) 0.00 21.25 42.51
Add for MA @ 25% 0.00 5.31 10.63
Rate per 1 sqm 1421.84 1464.65 1507.47
Overheads&Contractors Profit @13.615% 193.58 199.41 205.24
Rate per 1 sqm 1615.42 1664.06 1712.71
Say 1615 1664 1713

24 Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum
cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size
graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1
to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate
(sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials , centering
using Casurina Ballies , Bamboos , Wooden Reapers , Runners , Wood Posts , Wall Plates etc., for 60cm
wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of
6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing,
lifting of concrete manually, laying concrete, curing, overheads & contractors profit complete etc., but
excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402, 403 & 903)

(BLD-CSTN-3-16)
A.MATERIALS :
Cement 380.00 Kgs 5802.83 1000 Kgs 2205.08
20mm HBG graded metal 0.80 Cum 1552.89 1 Cum 1242.31
Sand 0.40 Cum 873.79 1 Cum 349.52
B.LABOUR :
1st class Mason 0.067 Nos 420.00 1 Each 28.14
2nd class Mason 0.133 Nos 375.00 1 Each 49.88
Mazdoor (both men&women) 3.077 Nos 320.00 1 Each 984.64
Add for MA @ 25% 0.25 1062.66 265.66

C.MACHINERY :
Batching plant 0.50 cum 0.308 hours 236.80 1 hour 72.93
Crew charges 0.308 hours 320.00 1 hour 98.56
Add MA on crew charges 0.25 98.56 24.64
Water(including for curing) 1.20 kl 103.00 1 kl 123.60
Rate per 1 cum 5444.96

Cost of RCC M 25 design mix 0.0375 cum 5444.96 1 cum 204.19

Rate for other Floors FF SF TF

Rate as above 204.19 204.19 204.19
Hire charges of centering and scaffolding 90.00 90.00 90.00
Labour , lift charges for scaffolding 87.60 96.60 105.00
Add for MA @ 25% 21.90 24.15 26.25
Lift charges of materials(Manual) 0.00 3.98 7.97
Add for MA @ 25% 0.00 1.00 1.99
Rate per 1 RM 403.69 419.92 435.40
 CIVIL DATA : Page-31

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Overheads&Contractors Profit @13.615% 54.96 57.17 59.28
Rate per 1 RM 458.65 477.09 494.68
Say 459 477 495

25 Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement : Screened sand) using
common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x
11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and
conveyance of all materials like cement, screened sand, bricks, water etc., to site, including sales & other
taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges,
constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished
item of work. (APSS No. 501 & 504).

(BLD-CSTN-5-5)
Unit : 1cum
A.MATERIALS :
Cement 36.00 Kgs 5802.83 1000 Kgs 208.90
Common burnt clay bricks 23x11x7cms 512 Nos 5419.96 1000 Nos 2775.02
Fine aggregate ( Sand ) 0.20 cu.m. 940.79 1 cu.m. 188.16
B.LABOUR :
1st class mason 0.24 Nos. 420.00 1 Each 100.80
2nd class mason 0.56 Nos. 375.00 1 Each 210.00
Mazdoor (Unskilled) 1.89 Nos. 320.00 1 Each 604.80
Add for MA @ 25% 0.25 915.60 228.90
water charges @ 1% 0.01 4316.58 43.17
Rate per 1 cum 4359.75

a Up to basement
Rate as worked out above 1.00 Cum 4359.75 1 Cum 4359.75
Overheads&Contractors Profit @13.615% 0.13615 4359.75 593.58
Rate per 1 cum 4953.32
Say 4953

b) Superstructure :
Rate for other Floors FF SF TF 4F
Rate as worked out above 4359.75 4359.75 4359.75 4359.75
Hire charges for Access Scaffolding 43.17 43.17 43.17 43.17
Labour charges for scaffolding 268.83 381.65 494.35 607.39
Add for MA @ 25% 67.21 95.41 123.59 151.85
Lift charges ( Page 131 of Std. Data ) 0.00 91.56 183.12 274.68
Add for MA @ 25% 0.00 22.89 45.78 68.67
Rate per 1 cum 4738.96 4994.43 5249.76 5505.51
Overheads&Contractors Profit @13.615% 645.21 679.99 714.75 749.57
Rate per 1 cum 5384.17 5674.42 5964.51 ###
Say 5384 5674 5965 6255

26 Reinforced Brick Masonry for partition walls (11.0 cm thick) in CM (1:4) prop. (Cement : Screened
sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or
traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40
Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement
pegged into mortar joints of main brick walls where applicable including cost and conveyance of all
materials like cement, steel, sand, bricks, water etc., to site, including sales & other taxes on all materials,
all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges,
constructing masonry, lift charges, curing, etc., and overheads & contractors profit but excluding cost of
steel and its fabrication charges complete for finished item of work. (APSS No. of 501 & 509)

(BLD-CSTN-5-12)
 CIVIL DATA : Page-32

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Unit - 10sqm
A.MATERIALS :
Common burnt clay bricks 23x11x7cms 565 Nos. 5419.96 1000 Nos. 3062.28
Cement 79.20 Kgs 5802.83 1000 Kgs 459.58
Fine aggregate ( Sand ) 0.22 cu.m. 940.79 1 cu.m. 206.97
B.LABOUR :
1st class mason 0.60 Nos. 420.00 1 Each 252.00
2nd class mason 0.60 Nos. 375.00 1 Each 225.00
Mazdoor (Unskilled) 2.75 Nos. 320.00 1 Each 880.00
Add for MA @ 25% 0.25 1357.00 339.25
water charges @ 1% 0.01 5425.09 54.25
Rate per 10 sqm 5479.34
Rate per 1 sqm 547.93

Rate for other Floors FF SF TF 4F

Rate as worked out above 547.93 547.93 547.93 547.93
Hire charges for Access Scaffolding 9.93 9.93 9.93 9.93
Labour charges for scaffolding 61.83 87.78 113.70 139.70
Add for MA @ 25% 15.46 21.95 28.43 34.93
Lift charges ( Page 131 of Std. Data ) 0.00 13.57 27.14 40.71
Add for MA @ 25% 0.00 3.39 6.79 10.18
Rate per 1 sqm 635.15 684.55 733.91 783.37
Overheads&Contractors Profit @13.615% 86.48 93.2 99.92 106.66
Rate per 1 sqm 721.63 777.75 833.83 890.03
Say 722 778 834 890

27 Masonry work in CM(1:6) prop (Cement : Screened sand) in superstructure with fly ash cement / lime
solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing
strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water
etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement
mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc.,
complete for finished item of work. (APSS No. 501 & 504).

(BLD-CSTN-5-17)
Unit = 1 Cum
A.MATERIALS
No of blocks required for
1 Cum of Masonry 110 Nos 25857.31 1000 Nos 2844.30
Cement 24.00 Kgs 5802.83 1000 Kgs 139.27
Fine aggregate ( Sand ) 0.10 cu.m. 940.79 1 cu.m. 94.08
B .LABOUR
Mason 1st class 0.42 Nos. 420.00 1 Each 176.40
Mason 2nd class 0.92 Nos. 375.00 1 Each 345.00
Man Mazdoor 0.70 Nos. 320.00 1 Each 224.00
Woman Mazdoor 2.10 Nos. 320.00 1 Each 672.00
Add for MA @ 25% 0.25 1417.40 354.35
water charges @ 1% 0.01 4849.40 48.49
Rate per 1 cum 4897.90

a) Rate for Foundation , Basement , Compound wall

Rate as above 1.00 cum 4897.90 1 cum 4897.90
Overheads&Contractors Profit @13.615% 0.13615 4897.90 666.85
Rate per 1 cum 5564.74
say 5565
 CIVIL DATA : Page-33

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
b) Superstructure :
Rate for other Floors FF SF TF 4F
Rate as worked out above 4897.90 4897.90 4897.90 4897.90
Hire charges for Access Scaffolding 44.13 44.13 44.13 44.13
Labour charges for scaffolding 274.80 390.13 505.33 620.89
Add for MA @ 25% 68.70 97.53 126.33 155.22
Lift charges ( Page 131 of Std. Data ) 0.00 141.74 283.48 425.22
Add for MA @ 25% 0.00 35.44 70.87 106.31
5285.53 5606.87 5928.04 6249.67
Overheads&Contractors Profit @13.615% 719.62 763.37 807.10 850.89
Rate per 1 cum 6005.15 6370.24 6735.14 7100.56
Say 6005 6370 6735 7101

28 Reinforced Masonry for partition walls (100 mm thick) in CM (1:4) prop. (Cement : Screened sand)
using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum
compressive strength of 50 Kg/Sq.cmand placing 2 Nos. of 6mm M.S plain rods in every third layer with
free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost
and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, including sales & other
taxes on all materials, all operational, incidental charges such as labour charges for mixing cement mortar,
scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit but
excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 509)

(BLD-CSTN-5-12)
Unit - 10sqm
A.MATERIALS :
Flyash lime solid blocks 247 Nos. 11825.47 1000 Nos. 2920.89
Cement 36.00 Kgs 5802.83 1000 Kgs 208.90
Fine aggregate ( Sand ) 0.10 cu.m. 940.79 1 cu.m. 94.08
B.LABOUR :
1st class mason 0.60 Nos. 420.00 1 Each 252.00
2nd class mason 0.60 Nos. 375.00 1 Each 225.00
Mazdoor (Unskilled) 2.75 Nos. 320.00 1 Each 880.00
Add for MA @ 25% 0.25 1357.00 339.25
water charges @ 1% 0.01 4920.12 49.20
Rate per 10 sqm 4969.32
Rate per 1 sqm 496.93

Internal walls :
Rate for other Floors FF SF TF 4F
Rate as worked out above 496.93 496.93 496.93 496.93
Hire charges for Access Scaffolding 9.93 9.93 9.93 9.93
Labour charges for scaffolding 61.83 87.78 113.70 139.70
Add for MA @ 25% 15.46 21.95 28.43 34.93
Lift charges ( Page 131 of Std. Data ) 0.00 13.57 27.14 40.71
Add for MA @ 25% 0.00 3.39 6.79 10.18
Rate per 1 sqm 584.15 633.55 682.91 732.37
Overheads&Contractors Profit @13.615% 79.53 86.26 92.98 99.71
Rate per 1 sqm 663.68 719.81 775.89 832.08
Say 664 720 776 832
 CIVIL DATA : Page-34

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
29 Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite
metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry
including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water
etc. to site, including sales & other taxes on all materials and including all charges for mixing, laying
concrete in position, curing etc., & lift charges , and overheads & contractors profit for Bed Blocks & Hold
Fasts for finished item of work. (APSS No. 402)
(BLD-CSTN-3-10 & 11)
Unit : 1cum
A.MATERIALS :
HBG 20mm size metal 0.90 Cum 1552.89 1 Cum 1397.60
Sand 0.45 Cum 873.79 1 Cum 393.21
Cement 220.00 Kgs 5802.83 1 MT 1276.62
Water ( including for curing ) 1.20 Kl 103.00 1 Kl 123.60
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 131.90 1 hour 131.90
Crew Charges 1.00 hour 206.70 1 hour 206.70
Add MA on crew charges 0.25 206.70 51.68
C.LABOUR :
1st class mason 0.10 Nos. 420.00 1 Each 42.00
Mazdoor (Unskilled) 1.39 Nos. 320.00 1 Each 444.80
Add for MA @ 25% 0.25 486.80 121.70
Rate per 1 cum 4189.80

Rate for other Floors FF SF TF 4F

Rate as worked out above 4189.80 4189.80 4189.80 4189.80
Hire charges of centering and scaffolding 61.00 61.00 61.00 61.00
Lift charges for scaffolding 244.00 268.40 292.80 317.20
Add for MA @ 25% 61.00 67.10 73.20 79.30
Lift charges ( Page 131 of Std. Data ) 0.00 48.68 97.36 146.04
Add for MA @ 25% 0.00 12.17 24.34 36.51
Rate per 1 cum 4555.80 4647.15 4738.50 4829.85
Overheads&Contractors Profit @13.615% 620.27 632.71 645.15 657.58
Rate per 1 cum 5176.07 5279.86 5383.65 5487.43
say 5176 5280 5384 5487

30 Plain Cement Concrete M 20 design mix using WEIGH BATCHER / MIXER, 20mm size hard granite
machine crushed graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8)
from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete including
cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to
site including steel centering, shuttering, machine mixing, lift charges, laying concrete,vibrating, curing,
overheads & contrctors profit etc., complete for finished item of work (APSS No. 402 & 403) for steps
(BLD-CSTN-3-16)
Unit : 1cum
A.MATERIALS :
HBG 20mm size metal 0.80 Cum 1552.89 1 Cum 1242.31
Sand 0.40 Cum 873.79 1 Cum 349.52
Cement 350.00 Kgs 5802.83 1000 Kgs 2030.99
Water ( including for curing ) 1.20 Kl 103.00 1 Kl 123.60
B.MACHINERY :
Batching plant 0.50 cum 0.308 hour 236.80 1 hour 72.93
Crew charges 0.308 hour 320.00 1 hour 98.56
Needle vibrator 40mm ( petrol ) 0.308 hours 26.60 1 hour 8.19
Crew charges 0.308 hours 148.80 1 hour 45.83
Add MA on crew charges 0.25 144.39 36.10
 CIVIL DATA : Page-35

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
C.LABOUR :
1st class mason 0.067 Nos. 420.00 1 Each 28.14
2nd class mason 0.067 Nos. 375.00 1 Each 25.13
Mazdoor (Unskilled) 3.077 Nos. 320.00 1 Each 984.64
Add for MA @ 25% 0.25 1037.91 259.48
Rate per 1 cum 5305.41

Rate for other Floors FF SF TF 4F

Cost of M 20 design mix 5305.41 5305.41 5305.41 5305.41
Hire charges of centering and scaffolding 61.00 61.00 61.00 61.00
Lift charges for scaffolding 244.00 268.40 292.80 317.20
Add for MA @ 25% 61.00 67.10 73.20 79.30
Lift charges ( Page 131 of Std. Data ) 0.00 103.79 207.58 311.37
Add for MA @ 25% 0.00 25.95 51.90 77.84
Rate per 1 cum 5671.41 5831.65 5991.89 6152.13
Overheads&Contractors Profit @13.615% 772.16 793.98 815.80 837.61
Rate per 1 cum 6443.58 6625.63 6807.69 6989.74
Say 6444 6626 6808 6990

31 Reinforced Cement Concrete M 20 design mix using 12mm size hard granite machine crushed graded
metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using
a minimum quantity of 350 kgs. of cement per 1 cum of concrete using WEIGH BATCHER / MIXER
including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate,
water etc., to site including steel centering, shuttering, machine mixing, laying concrete, lift charges, curing
etc., and overheads & contractors profit complete for finished item of work (APSS No. 402 & 403) for sill
slabs.
(BLD-CSTN-3-13 - A)
A.MATERIALS :
Cement 350.00 Kgs 5802.83 1000 Kgs 2030.99
12mm HBG graded metal 0.80 Cum 1347.79 1 Cum 1078.23
Sand 0.40 Cum 873.79 1 Cum 349.52
B.LABOUR :
1st class Mason 0.133 Nos 420.00 1 Each 55.86
2nd class Mason 0.267 Nos 375.00 1 Each 100.13
Mazdoor (both men&women) 3.60 Nos 320.00 1 Each 1152.00
Add for MA @ 25% 0.25 1307.99 327.00
C.MACHINERY :
Batching plant 0.50 cum 0.308 hour 236.80 1 hour 72.93
Crew charges 0.308 hour 320.00 1 hour 98.56
Add MA on crew charges 0.25 98.56 24.64
Water(including for curing) 1.20 kl 103.00 1 kl 123.60
Basic cost per 1 cum 5413.45

Rate for other Floors FF SF TF 4F

Rate as worked out above 5413.45 5413.45 5413.45 5413.45
Hire charges of centering and scaffolding 61.00 61.00 61.00 61.00
Lift charges for scaffolding 244.00 268.40 292.80 317.20
Add for MA @ 25% 61.00 67.10 73.20 79.30
Lift charges ( Page 131 of Std. Data ) 0.00 130.80 261.60 392.40
Add for MA @ 25% 0.00 32.70 65.40 98.10
Rate per 1 cum 5779.45 5973.45 6167.45 6361.45
Overheads&Contractors Profit @13.615% 786.87 813.29 839.70 866.11
Rate per 1 cum 6566.33 6786.74 7007.15 7227.56
Say 6566 6787 7007 7228
 CIVIL DATA : Page-36

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
32 Reinforced Cement Concrete M 20 design mix using 12mm size hard granite machine crushed graded
metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using
a minimum quantity of 350 kgs. of cement per 1 cum of concrete using WEIGH BATCHER / MIXER
including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate,
water etc., to site including steel centering, shuttering, labour charges such as weigh batching, machine
mixing, laying concrete, lift charges, curing etc., and overheads & contractors profit complete for finished
item of work (APSS No. 402 & 403) for platforms and shelves.

(BLD-CSTN-3-16)
A.MATERIALS :
Cement 350.00 Kgs 5802.83 1000 Kgs 2030.99
12mm HBG graded metal 0.80 Cum 1347.79 1 Cum 1078.23
Sand 0.40 Cum 873.79 1 Cum 349.52
B.LABOUR :
1st class Mason 0.067 Nos 420.00 1 Each 28.14
2nd class Mason 0.133 Nos 375.00 1 Each 49.88
Mazdoor (both men&women) 3.077 Nos 320.00 1 Each 984.64
Add for MA @ 25% 0.25 1062.66 265.66
C.MACHINERY :
Batching plant 0.50 cum 0.308 hour 236.80 1 hour 72.93
Crew charges 0.308 hour 320.00 1 hour 98.56
Add MA on crew charges 0.25 98.56 24.64
Water(including for curing) 1.20 kl 103.00 1 kl 123.60
Basic cost per 1cum 5106.79

a) 50mm thick platforms :

Cost of M 20 design mix 0.05 cum 5106.79 1 cum 255.34
Rate for other Floors FF SF TF 4F
Rate as worked out above 255.34 255.34 255.34 255.34
Hire charges of centering and scaffolding
(50% of roof slab) 76.00 76.00 76.00 76.00
Lift charges for scaffolding 63.50 70.00 76.00 82.50
Add for MA @ 25% 15.88 17.50 19.00 20.63
Lift charges ( Page 131 of Std. Data ) 0.00 5.31 10.63 15.94
Add for MA @ 25% 0.00 1.33 2.66 3.98
Rate per 1 sqm 410.71 425.48 439.62 454.39
Overheads&Contractors Profit @13.615% 55.92 57.93 59.85 61.87
Rate per 1 sqm 466.63 483.41 499.48 516.25
Say 467 483 499 516
b) 25mm thick shelves :
Cost of M 20 design mix 0.025 cum 5106.79 1 cum 127.67
Rate per 1sqm 127.67

Rate for other Floors FF SF TF 4F

Rate as worked out above 127.67 127.67 127.67 127.67
Hire charges of centering and scaffolding
(25% of roof slab) 38.00 38.00 38.00 38.00
Lift charges for scaffolding 31.75 35.00 38.00 41.25
Add for MA @ 25% 7.94 8.75 9.50 10.31
Lift charges ( Page 131 of Std. Data ) 0.00 2.66 5.31 7.97
Add for MA @ 25% 0.00 0.66 1.33 1.99
Rate per 1 sqm 205.36 212.74 219.81 227.19
Overheads&Contractors Profit @13.615% 27.96 28.96 29.93 30.93
Rate per 1 sqm 233.32 241.71 249.74 258.13
Say 233 242 250 258
 CIVIL DATA : Page-37

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)

32 Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different
diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes
and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing
with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings,
including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs,
spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational,
labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all
materials etc. ,and overheads & contractors profit complete for finished item of work.( APSS No.126)

(BLD-CSTN-4.2)& Amendment in SoR 2011-12 page No. 392

Unit - 1 MT
a) Material
HYSD bars including 5% for overlaps and
wastage 1.05 MT 41075.25 1 MT 43129.01
Binding wire 6.00 Kgs 70.00 1 Kgs 420.00
b) Labour for cutting , bending , shifting to
site , tying and placing in position
1st class Blacksmith / Barbender 3.00 Nos. 490.00 1 Each 1470.00
2nd class Blacksmith / Barbender 7.00 Nos. 420.00 1 Each 2940.00
Mazdoor(Unskilled) 10.00 Nos. 320.00 1 Each 3200.00
Add for MA @ 25% 0.25 7610.00 1902.50
53061.51

Rate for other Floors FF SF TF 4F

Rate as worked out above 53061.51 53061.51 53061.51 53061.51
Lift charges ( Page 131 of Std. Data ) 0.00 761.00 1522.00 2283.00
Add for MA @ 25% 0.00 190.25 380.50 570.75
Rate per 1 MT 53061.51 54012.76 54964.01 55915.26
Overheads&Contractors Profit @13.615% 7224.32 7353.84 7483.35 7612.86
Rate per 1 MT 60285.83 61366.60 62447.36 63528.12
Say 60286 61367 62447 63528

33 Providing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different
diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes
and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing
with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings,
including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs,
spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational,
labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all
materials etc. ,and overheads & contractors profit complete for finished item of work.( APSS No.126)

(BLD-CSTN-4.2)& Amendment in SoR 2011-12 page No. 392

Unit - 1 MT
a) Material
TMT bars including 5% for overlaps and
wastage 1.05 MT 42075.25 1 MT 44179.01
Binding wire 6.00 Kgs 70.00 1 Kgs 420.00
b) Labour for cutting , bending , shifting to
site , tying and placing in position
1st class Blacksmith / Barbender 3.00 Nos. 490.00 1 Each 1470.00
2nd class Blacksmith / Barbender 7.00 Nos. 420.00 1 Each 2940.00
Mazdoor(Unskilled) 10.00 Nos. 320.00 1 Each 3200.00
Add for MA @ 25% 0.25 7610.00 1902.50
54111.51
 CIVIL DATA : Page-38

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)

Rate for other Floors FF SF TF 4F

Rate as worked out above 54111.51 54111.51 54111.51 54111.51
Lift charges ( Page 131 of Std. Data ) 0.00 761.00 1522.00 2283.00
Add for MA @ 25% 0.00 190.25 380.50 570.75
Rate per 1 MT 54111.51 55062.76 56014.01 56965.26
Overheads&Contractors Profit @13.615% 7367.28 7496.80 7626.31 7755.82
Rate per 1 MT 61478.79 62559.56 63640.32 64721.08
Say 61479 62560 63640 64721

34 Providing Mild steel (MS) steel bars (Fe 250 grade as per IS 432) of different diameters including labour
charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover
blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills
for reinforcement work as per approved designs and drawings, including cost and conveyance of steel
bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and
conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting,
bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads &
contractors profit complete for finished item of work.( APSS No.126)

(BLD-CSTN-4.2)& Amendment in SoR 2011-12 page No. 392

Unit - 1 MT
a) Material
Mild steel bars including 5% for overlaps
and wastage 1.05 MT 42575.25 1 MT 44704.01
Binding wire 6.00 Kgs 70.00 1 Kgs 420.00
b) Labour for cutting , bending , shifting to site
, tying and placing in position
1st class Blacksmith / Barbender 3.00 Nos. 490.00 1 Each 1470.00
2nd class Blacksmith / Barbender 7.00 Nos. 420.00 1 Each 2940.00
Mazdoor(Unskilled) 10.00 Nos. 320.00 1 Each 3200.00
Add for MA @ 25% 0.25 7610.00 1902.50
54636.51

Rate for other Floors FF SF TF 4F

Rate as worked out above 54636.51 54636.51 54636.51 54636.51
Lift charges ( Page 131 of Std. Data ) 0.00 761.00 1522.00 2283.00
Add for MA @ 25% 0.00 190.25 380.50 570.75
Rate per 1 MT 54636.51 55587.76 56539.01 57490.26
Overheads&Contractors Profit @13.615% 7438.76 7568.27 7697.79 7827.30
Rate per 1 MT 62075.27 63156.03 64236.80 65317.56
Say 62075 63156 64237 65318

35 Ornamental ceiling plastering 12mm thick single coat in CM (1:5) using screened sand including cost
and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all
materials, and all operational, incidental charges on materials and including cost of all labour charges for
mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit
complete for finished item of work.(SS 901,903 & 904)

(BLD-CSTN-8-3)
Unit : 10 sqm
A.MATERIALS :
Cement 43.20 Kgs 5802.83 1000 Kgs 250.68
Fine aggregate ( Sand ) 0.15 cu.m. 940.79 1 cu.m. 141.12
B.LABOUR :
1st Class Mason 0.60 Nos. 420.00 1 Each 252.00
Mazdoor (Unskilled) 0.96 Nos. 320.00 1 Each 307.20
 CIVIL DATA : Page-39

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Add for MA @ 25% 0.25 559.20 139.80
water charges @ 1% 0.01 1090.80 10.91
Rate per 10 Sqm 1101.71
Rate per 1 Sqm 110.17

Rate for other Floors FF SF TF 4F

Rate as worked out above 110.17 110.17 110.17 110.17
Hire charges for Access Scaffolding 2.37 2.37 2.37 2.37
Labour charges for scaffolding 12.55 17.64 22.73 27.82
Add for MA @ 25% 3.14 4.41 5.68 6.96
Lift charges ( Page 131 of Std. Data ) 0.00 5.59 11.18 16.78
Add for MA @ 25% 0.00 1.40 2.80 4.20
Rate per 1 Sqm 128.23 141.58 154.93 168.30
Overheads&Contractors Profit @13.615% 17.46 19.28 21.09 22.91
Rate per 1 Sqm 145.69 160.86 176.02 191.21
Say 146 161 176 191

36 Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and
top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all
materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all
operational, incidental charges on materials and including cost of all labour charges for mixing mortar,
finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge
etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904)

( BLD-CSTN-8-10)
Unit : 10 sqm
A.MATERIALS :
Base coat in CM(1:6) , 8mm thick
Cement 26.40 Kgs 5802.83 1000 Kgs 153.19
Fine aggregate (Sand) 0.11 Cum 940.79 1 Cum 103.49
Top coat in CM(1:4) , 4mm thick
Cement 14.40 Kgs 5802.83 1000 Kgs 83.56
Fine aggregate (Sand) 0.04 Cum 940.79 1 Cum 37.63
B.LABOUR :
1st Class Mason 0.63 Nos. 420.00 1 Each 264.60
2nd Class Mason 1.47 Nos. 375.00 1 Each 551.25
Mazdoor (Unskilled) 3.90 Nos. 320.00 1 Each 1248.00
Add for MA @ 25% 0.25 2063.85 515.96
water charges @ 1% 0.01 2957.69 29.58
Rate per 10 Sqm 2987.26
Rate per 1 Sqm 298.73

Walls in superstructure :
Rate for other Floors FF SF TF 4F
Rate as worked out above 298.73 298.73 298.73 298.73
Hire charges for Access Scaffolding 0.99 0.99 0.99 0.99
Labour charges for scaffolding 6.18 8.78 11.37 13.97
Add for MA @ 25% 1.55 2.20 2.84 3.49
Lift charges ( Page 131 of Std. Data ) 0.00 20.64 41.28 61.92
Add for MA @ 25% 0.00 5.16 10.32 15.48
Rate per 1 Sqm 307.45 336.50 365.53 394.58
Overheads&Contractors Profit @13.615% 41.86 45.81 49.77 53.72
349.31 382.31 415.30 448.30
Say 349 382 415 448
 CIVIL DATA : Page-40

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
37 Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all
materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all
operational, incidental charges on materials and including cost of all labour charges for mixing mortar,
finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for
finished item of work.(SS 901,903 & 904)

(BLD-CSTN-8-3)
Unit : 10 sqm
A.MATERIALS :
Cement 43.20 Kgs 5802.83 1000 Kgs 250.68
Fine aggregate ( Sand ) 0.15 cu.m. 940.79 1 cu.m. 141.12
B.LABOUR :
1st Class Mason 0.60 Nos. 420.00 1 Each 252.00
Mazdoor (Unskilled) 0.96 Nos. 320.00 1 Each 307.20
Add for MA @ 25% 0.25 559.20 139.80
water charges @ 1% 0.01 1090.80 10.91
Rate per 10 Sqm 1101.71
Rate per 1 Sqm 110.17

a) for basement :
Rate per 1 Sqm 1.00 sqm 110.17 1 sqm 110.17
Overheads&Contractors Profit @13.615% 0.13615 110.17 15.00
Rate per 1 Sqm 125.17
Say 125

b) Walls in superstructure :
Rate for other Floors FF SF TF 4F
Rate as worked out above 110.17 110.17 110.17 110.17
Hire charges for Access Scaffolding 0.99 0.99 0.99 0.99
Labour charges for scaffolding 6.18 8.78 11.37 13.97
Add for MA @ 25% 1.55 2.20 2.84 3.49
Lift charges ( Page 131 of Std. Data ) 0.00 5.59 11.18 16.78
Add for MA @ 25% 0.00 1.40 2.80 4.20
118.89 129.12 139.35 149.60
Overheads&Contractors Profit @13.615% 16.19 17.58 18.97 20.37
Rate per 1 Sqm 135.08 146.70 158.32 169.97
Say 135 147 158 170

38 Plastering 20mm thick in two coats using screened sand with base coat of 16mm thick in CM(1:6) and
top coat of 4mm thick in CM(1:4) with dubara sponge finishing including cost and conveyance of all
materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all
operational, incidental charges on materials and including cost of all labour charges for mixing mortar,
finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc.,
and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

(BLD-CSTN-8-9)
Unit : 10 sqm
A.MATERIALS :
Base coat in CM(1:6) , 16mm thick
Cement 43.20 Kgs 5802.83 1000 Kgs 250.68
Fine aggregate (Sand) 0.18 Cum 940.79 1 Cum 169.34
Top coat in CM(1:4) , 4mm thick
Cement 14.40 Kgs 5802.83 1000 Kgs 83.56
Fine aggregate (Sand) 0.04 Cum 940.79 1 Cum 37.63
 CIVIL DATA : Page-41

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
B.LABOUR :
1st Class Mason 0.63 Nos. 420.00 1 Each 264.60
2nd Class Mason 1.47 Nos. 375.00 1 Each 551.25
Mazdoor (Unskilled) 3.90 Nos. 320.00 1 Each 1248.00
Add for MA @ 25% 0.25 2063.85 515.96
water charges @ 1% 0.01 3121.03 31.21
Rate per 10 Sqm 3152.24
Rate per 1 Sqm 315.22

Walls in superstructure :
Rate for other Floors FF SF TF 4F
Rate as worked out above 315.22 315.22 315.22 315.22
Hire charges for Access Scaffolding 0.99 0.99 0.99 0.99
Labour charges for scaffolding 6.18 8.78 11.37 13.97
Add for MA @ 25% 1.55 2.20 2.84 3.49
Lift charges ( Page 131 of Std. Data ) 0.00 20.64 41.28 61.92
Add for MA @ 25% 0.00 5.16 10.32 15.48
323.94 352.99 382.02 411.07
Overheads&Contractors Profit @13.615% 44.10 48.06 52.01 55.97
Rate per 1 Sqm 368.04 401.05 434.03 467.04
Say 368 401 434 467

39 Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all
materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all
operational, incidental charges on materials and including cost of all labour charges for mixing mortar,
finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for
finished item of work .(SS 901,903 & 904)

(BLD-CSTN-8-8)
Unit : 10 sqm
A.MATERIALS :
Cement 60.48 Kgs 5802.83 1000 Kgs 350.96
Fine aggregate (Sand) 0.21 Cum 940.79 1 Cum 197.57
B.LABOUR :
2nd Class Mason 0.94 Nos. 375.00 1 Each 352.50
Mazdoor (Unskilled) 1.60 Nos. 320.00 1 Each 512.00
Add for MA @ 25% 0.25 864.50 216.13
water charges @ 1% 0.01 1629.15 16.29
Rate per 10 Sqm 1645.44
Rate per 1 Sqm 164.54

a) for basement :
Rate per 1 Sqm 1.00 sqm 164.54 1 sqm 164.54
Overheads&Contractors Profit @13.615% 0.13615 164.54 22.40
Rate per 1 Sqm 186.94
Say Say 187

b) Walls in superstructure :
Rate for other Floors FF SF TF 4F
Rate as worked out above 164.54 164.54 164.54 164.54
Hire charges for Access Scaffolding 0.99 0.99 0.99 0.99
Labour charges for scaffolding 6.18 8.78 11.37 13.97
Add for MA @ 25% 1.55 2.20 2.84 3.49
Lift charges ( Page 131 of Std. Data ) 0.00 8.65 17.29 25.94
Add for MA @ 25% 0.00 2.16 4.32 6.49
 CIVIL DATA : Page-42

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
173.26 187.32 201.35 215.42
Overheads&Contractors Profit @13.615% 23.59 25.50 27.41 29.33
Rate per 1 Sqm 196.85 212.82 228.76 244.75
Say 197 213 229 245

40 Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop.
using screened sand 20mm thick (average) mixed with integral cement water proofing liquid confirming to
IS: 2645-2003 manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per
one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement
and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like
cement, sand, water proofing compound, water etc., to site, including sales & other taxes on all materials
and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth
and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors
profit complete for finished item of work. (APSS No. 901 & 903).

(BLD-CSTN-10-25)
Unit : 10 sqm
A.MATERIALS :
Cement 100.80 Kgs 5802.83 1000 Kgs 584.93
Fine aggregate (Sand) 0.21 Cum 940.79 1 Cum 197.57
Integral cement waterproofing liquid 0.40 Ltrs 210.00 1.00 Ltrs 84.00
B.LABOUR :
1st Class Mason 0.66 Nos. 420.00 1 Each 277.20
2nd Class Mason 1.54 Nos. 375.00 1 Each 577.50
Mazdoor (Unskilled) 3.70 Nos. 320.00 1 Each 1184.00
Add for MA @ 25% 0.25 2038.70 509.68
water charges @ 1% 0.01 3414.87 34.15
Rate per 10 Sqm 3449.01

Rate for other Floors FF SF TF 4F

Rate as worked out above 3449.01 3449.01 3449.01 3449.01
Lift charges ( Page 131 of Std. Data ) 0.00 203.87 407.74 611.61
Add for MA @ 25% 0.00 50.97 101.94 152.90
3449.01 3703.85 3958.69 4213.53
Overheads&Contractors Profit @13.615% 469.58 504.28 538.98 573.67
3918.59 4208.13 4497.67 4787.20
Rate per 1 Sqm 391.86 420.81 449.77 478.72
Say 392 421 450 479

41 Providing impervious coat to exposed RCC roof slab surfaces of sump , sump side wall,sump
bottom slab,in side of septic tank , in sunken slabs etc. to required slopes with CM (1:3) prop. using
screened sand 12mm thick mixed with integral cement water proofing liquid confirming to IS: 2645-2003
manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of
cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread
lining at regular intervals of 45cmx45cm where ever necessary including cost and conveyance of all
materials like cement, sand, water proofing compound, water etc., to site, including sales & other taxes on
all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges,
rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and
overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903).

(BLD-CSTN-8-2)
A.MATERIALS :
Cement 72.00 Kgs 5802.83 1000 Kgs 417.80
Fine aggregate (Sand) 0.15 Cum 940.79 1 Cum 141.12
Integral cement waterproofing liquid 0.29 Ltrs 210.00 1.00 Ltrs 60.90
B.LABOUR :
 CIVIL DATA : Page-43

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
1st Class Mason 0.60 Nos. 420.00 1 Each 252.00
Mazdoor (Unskilled) 0.96 Nos. 320.00 1 Each 307.20
Add for MA @ 25% 0.25 559.20 139.80
water charges @ 1% 0.01 1318.82 13.19
Rate per 10 Sqm 1332.01

Rate for other Floors FF SF TF 4F

Rate as worked out above 1332.01 1332.01 1332.01 1332.01
Lift charges ( Page 131 of Std. Data ) 0.00 55.92 111.84 167.76
Add for MA @ 25% 0.00 13.98 27.96 41.94
1332.01 1401.91 1471.81 1541.71
Overheads&Contractors Profit @13.615% 181.35 190.87 200.39 209.90
Rate per 10 Sqm 1513.36 1592.78 1672.20 1751.61
Rate per 1 Sqm 151.34 159.28 167.22 175.16
Say 151 159 167 175

42 RCM facia 50mm thick in CM(1:3) using screened sand for drop walls, fins with rabbit wire mesh &
nomianl reinforcement as directred by Engineer - In - Charge with dubara sponge finishing,including cost
and conveyance of all materials to site, sales & othertaxes on all materials,operationals &incidental,cost
and conveyance of cement,wire mesh,water to work site,centering,scaffolding and form work,lift charges
etc., and overheads & contractors profit complete for finished item of work but excluding cost of steel and
its fabrication charges for finished item of work(APSS NO.403&903)
(BLD-CSTN-8-11)
Unit : 10 sqm
A)MATERIALS
Rabbit wire mesh 13.30 sqm 17.00 1 sqm 226.10
Cement for base coat and plastering 240.00 Kgs 5802.83 1000 Kgs 1392.68
Cement for lumps 50.00 Kgs 5802.83 1000 Kgs 290.14
Fine aggregate (Sand) 0.50 cu.m. 940.79 1 cu.m. 470.40
Excluding HYSD steel/mild steel & binding
wire
B) LABOUR CHARGES
1st Class Mason 8.00 Nos. 420.00 1 Each 3360.00
Operator concrete mixer 1.00 Nos. 420.00 1 Each 420.00
Mazdoor (Unskilled) 10.00 Nos. 320.00 1 Each 3200.00
Add for MA @ 25% 0.25 6980.00 1745.00
C)Machinery :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 2.00 hours 131.90 1 hours 263.80
Crew charges 2.00 hours 206.70 1 hours 413.40
Add MA on crew charges 0.25 206.70 103.35
water charges @ 1% 0.01 11884.87 118.85
Rate per 10 Sqm 12003.71
Rate per 1 Sqm 1200.37

Rate for other Floors FF SF TF 4F

Rate as worked out above 1200.37 1200.37 1200.37 1200.37
Hire charges for Access Scaffolding 0.99 1.98 2.97 3.96
Labour charges for scaffolding 6.18 8.78 11.37 13.97
Add for MA @ 25% 1.55 2.20 2.84 3.49
Lift charges ( Page 131 of Std. Data ) 0.00 69.80 139.60 209.40
Add for MA @ 25% 0.00 17.45 34.90 52.35
1209.09 1300.58 1392.05 1483.54
Overheads&Contractors Profit @13.615% 164.62 177.07 189.53 201.98
 CIVIL DATA : Page-44

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Rate per 1 Sqm 1373.71 1477.65 1581.58 1685.52
Say 1374 1478 1582 1686

43 Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick set over a base coat of
CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat
cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full
depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc.
complete including sales & other taxes on all materials including all labour charges like dressing of flooring
stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat, water charges
etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)

(BLD-CSTN-9-1)
Unit = 10 sqm.
A. MATERIALS:
Polished shahabad stone 15 to 18mm thick 11.00 Sqm 1938.19 10 Sqm 2132.01
Cement for CM (1:8) proportion for base
coat 21.60 Kgs 5802.83 1000 Kgs 125.34
Cement for slurry 33.00 Kgs 5802.83 1000 Kgs 191.49
Cement for pointing 20.00 Kgs 5802.83 1000 Kgs 116.06
Sand for CM(1:8) 0.12 Cum 940.79 1 Cum 112.89
B .LABOUR
Mason 1st class 3.10 Nos 420.00 1 Each 1302.00
Mason 2nd class 1.10 Nos 375.00 1 Each 412.50
Mazdoor(un skilled) 0.86 Nos 320.00 1 Each 275.20
Add for MA @ 25% 0.25 1989.70 497.43
Add water charges 1% 0.01 5164.92 51.65
Rate for 10 sqm 5216.57

Rate for other floors FF SF TF 4F

Rate as worked out above 5216.57 5216.57 5216.57 5216.57
Lift charges ( Page 131 of Std. Data ) 0.00 198.97 397.94 596.91
Add for MA @ 25% 0.00 49.74 99.49 149.23
5216.57 5465.28 5713.99 5962.71
Overheads&Contractors Profit @13.615% 710.24 744.10 777.96 811.82
Rate per 10 Sqm 5926.81 6209.38 6491.95 6774.53
Rate per 1 Sqm 592.68 620.94 649.20 677.45
Say 593 621 649 677

44 Flooring with Polished black Kadapa slabs minimum of 15mm thick of size 0.457m x 0.457m set
over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab
including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat
cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring
stones etc. complete including sales & other taxes on all materials including all labour charges like
dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base
coat, water charges etc., and overheads & contractors profit complete for finished item of work. (APSS
No.703 & 701)

(BLD-CSTN-9-1)
Unit = 10 sqm.
A. MATERIALS:
Polished black Kadapa slabs minimum of
15mm thick 11.00 Sqm 1946.42 10 Sqm 2141.06
Cement for CM (1:8) proportion for base
coat 21.60 Kgs 5802.83 1000 Kgs 125.34
Cement for slurry 33.00 Kgs 5802.83 1000 Kgs 191.49
 CIVIL DATA : Page-45

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Cement for pointing 20.00 Kgs 5802.83 1000 Kgs 116.06
Sand for CM(1:8) 0.12 Cum 940.79 1 Cum 112.89
B .LABOUR
Mason 1st class 3.10 Nos 420.00 1 Each 1302.00
Mason 2nd class 1.10 Nos 375.00 1 Each 412.50
Mazdoor(un skilled) 0.86 Nos 320.00 1 Each 275.20
Add for MA @ 25% 0.25 1989.70 497.43
Add water charges 1% 0.01 5173.97 51.74
Rate for 10 sqm 5225.71

Rate for other floors FF SF TF 4F

Rate as worked out above 5225.71 5225.71 5225.71 5225.71
Lift charges ( Page 131 of Std. Data ) 0.00 198.97 397.94 596.91
Add for MA @ 25% 0.00 49.74 99.49 149.23
5225.71 5474.43 5723.14 5971.85
Overheads&Contractors Profit @13.615% 711.48 745.34 779.21 813.07
Rate per 10 Sqm 5937.19 6219.77 6502.35 6784.92
Rate per 1 Sqm 593.72 621.98 650.23 678.49
Say 594 622 650 678

45 Flooring with non-skid full body ceramic floor tiles of size 300mm x 300mm and thickness between 7
- 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all
shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm
thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of
honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth
mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water
and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

(BLD-CSTN-9-6)
Unit = 10 sqm.
A. MATERIALS:
Ceramic tiles 7 to 8mm thick (300mm x
300mm) 10.50 Sqm 450.00 1 Sqm 4725.00
Cement for CM(1:8) proportion for base
coat 21.60 Kgs 5802.83 1000 Kgs 125.34
Cement for slurry 33.00 Kgs 5802.83 1000 Kgs 191.49
White Cement 2.00 Kgs 29.00 1 Kg 58.00
Sand for CM(1:8) 0.12 Cum 940.79 1 Cum 112.89
B .LABOUR
Mason 1st class 0.96 Nos 420.00 1 Each 403.20
Mason 2nd class 2.24 Nos 375.00 1 Each 840.00
Mazdoor(un skilled) 3.30 Nos 320.00 1 Each 1056.00
Add for MA @ 25% 0.25 2299.20 574.80
Add water charges 1% 0.01 8086.73 80.87
Rate for 10sqm 8167.60

Rate for other Floors FF SF TF 4F

Rate as worked out above 8167.60 8167.60 8167.60 8167.60
Lift charges ( Page 131 of Std. Data ) 0.00 229.92 459.84 689.76
Add for MA @ 25% 0.00 57.48 114.96 172.44
8167.60 8455.00 8742.40 9029.80
Overheads&Contractors Profit @13.615% 1112.02 1151.15 1190.28 1229.41
Rate per 10 Sqm 9279.62 9606.15 9932.68 10259.21
Rate per 1 Sqm 927.96 960.61 993.27 1025.92
Say 928 961 993 1026
 CIVIL DATA : Page-46

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)

46 Flooring with non-skid full body ceramic floor tiles of size 400mm x 400mm and thickness between 7
- 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all
shades and designs with borders and design as per the approved flooring pattern as directed by the
Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over base coat of cement mortar (1:8),
12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry
of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth
mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water
and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)

(BLD-CSTN-9-6)
Unit = 10 sqm.
A. MATERIALS:
Ceramic tiles 7 to 8mm thick (400mm x
400mm) 10.50 Sqm 560.00 1 Sqm 5880.00
Cement for CM(1:8)proportion for base
coat 21.60 Kgs 5802.83 1000 Kgs 125.34
Cement for slurry 33.00 Kgs 5802.83 1000 Kgs 191.49
White Cement 2.00 Kgs 29.00 1 Kg 58.00
Sand for CM(1:8) 0.12 Cum 940.79 1 Cum 112.89
B .LABOUR
Mason 1st class 0.96 Nos 420.00 1 Each 403.20
Mason 2nd class 2.24 Nos 375.00 1 Each 840.00
Mazdoor(un skilled) 3.30 Nos 320.00 1 Each 1056.00
Add for MA @ 25% 0.25 2299.20 574.80
Add water charges 1% 0.01 9241.73 92.42
Rate for 10 sqm 9334.15

Rate for other Floors FF SF TF 4F

Rate as worked out above 9334.15 9334.15 9334.15 9334.15
Lift charges ( Page 131 of Std. Data ) 0.00 229.92 459.84 689.76
Add for MA @ 25% 0.00 57.48 114.96 172.44
9334.15 9621.55 9908.95 10196.35
Overheads&Contractors Profit @13.615% 1270.84 1309.97 1349.10 1388.23
Rate per 10 Sqm 10604.99 10931.52 11258.05 11584.58
Rate per 1 Sqm 1060.50 1093.15 1125.80 1158.46
Say 1060 1093 1126 1158

47 Flooring with soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm
and thickness between 8 to 10mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Parts 1 to 15)
of any colour and finish in all shades and designs with borders and design as per the approved flooring
pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base
coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab ,
including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately
with white cement paste to full depth mixed with pigment of matching shade including cost and
conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of
C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to
required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete
for finished item of work. (APSS No.701 & 707)
(BLD-CSTN-9-5)
Unit = 10 sqm.
A. MATERIALS:
Vitrified tiles 8 to 10mm thick of size
600mm x 600mm 10.50 Sqm 635.00 1 Sqm 6667.50
Cement for CM(1:8)proportion for base
coat 21.60 Kgs 5802.83 1000 Kgs 125.34
 CIVIL DATA : Page-47

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Cement for slurry 33.00 Kgs 5802.83 1000 Kgs 191.49
White Cement 6.00 Kgs 29.00 1 Kg 174.00
Sand for CM(1:8) 0.12 Cum 940.79 1 Cum 112.89
B .LABOUR
Mason 1st class 0.96 Nos 420.00 1 Each 403.20
Mason 2nd class 2.24 Nos 375.00 1 Each 840.00
Mazdoor(un skilled) 3.30 Nos 320.00 1 Each 1056.00
Add for MA @ 25% 0.25 2299.20 574.80
Add water charges 1% 0.01 10145.23 101.45
Rate for 10sqm 10246.68

Rate for other Floors FF SF TF 4F

Rate as worked out above 10246.68 10246.68 10246.68 10246.68
Lift charges ( Page 131 of Std. Data ) 0.00 229.92 459.84 689.76
Add for MA @ 25% 0.00 57.48 114.96 172.44
10246.68 10534.08 10821.48 11108.88
Overheads&Contractors Profit @13.615% 1395.09 1434.22 1473.34 1512.47
Rate per 10 Sqm 11641.77 11968.30 12294.82 12621.35
Rate per 1 Sqm 1164.18 1196.83 1229.48 1262.14
Say 1164 1197 1229 1262

48 Flooring with granite stone tiles 8mm thick (mirror polished of all shades) of 1st quality and of size as
approved by Engineer-in-charge with borders and design as per the approved flooring pattern as directed
by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8)
prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement
slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste
to full depth mixed with pigment of matching shade including cost and conveyance of all materials like
cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base
coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by
the Engineer- in-charge etc., and overheads & contractors profit complete for finished item of work.
(APSS No.701 & 707)

(BLD-CSTN-9-9)
Unit = 10 sqm.
A. MATERIALS:
Granite stone tiles 8mm thick (mirror
polished of all shades) 10.50 Sqm 1079.00 1 Sqm 11329.50
Cement for CM(1:8) for base coat 21.60 Kgs 5802.83 1000 Kgs 125.34
Cement for slurry 33.00 Kgs 5802.83 1000 Kg 191.49
White Cement 6.00 Kgs 29.00 1 Kg 174.00
Sand for CM(1:8) 0.12 Cum 940.79 1 Cum 112.89
B .LABOUR
Mason 1st class 0.96 Nos 420.00 1 Each 403.20
Mason 2nd class 2.24 Nos 375.00 1 Each 840.00
Mazdoor(un skilled) 3.30 Nos 320.00 1 Each 1056.00
Add for MA @ 25% 0.25 2299.20 574.80
Add water charges 1% 0.01 14807.23 148.07
Rate for 10 sqm 14955.30

Rate for other Floors FF SF TF 4F

Rate as worked out above 14955.30 14955.30 14955.30 14955.30
Lift charges ( Page 131 of Std. Data ) 0.00 229.92 459.84 689.76
Add for MA @ 25% 0.00 57.48 114.96 172.44
14955.30 15242.70 15530.10 15817.50
Overheads&Contractors Profit @13.615% 2036.16 2075.29 2114.42 2153.55
 CIVIL DATA : Page-48

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Rate per 10 Sqm 16991.46 17317.99 17644.52 17971.05
Rate per 1 Sqm 1699.15 1731.80 1764.45 1797.11
Say 1699 1732 1764 1797

49 Flooring with 16 to 18mm thick high polished granite stone slabs other than black and regular
colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and
design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over
base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof
slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed
neatly with white cement paste mixed with pigment of matching shade to full depth including cost and
conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational,
incidental labour & lift charges, polishing charges and all other taxes on all materials, cost of base coat
and overheads & contractors profit complete for finished item of work (S.S.701 & special)

(BLD-CSTN-9-7)
Unit = 10 sqm.
A. MATERIALS:
High polished granite slabs other than
black 16 to 18mm thick 10.50 Sqm 2767.00 1 Sqm 29053.50
Cement for CM(1:8) for base coat 36.00 Kgs 5802.83 1000 Kgs 208.90
Cement for slurry 33.00 Kgs 5802.83 1000 Kgs 191.49
White cement for jointing 6.00 Kgs 29.00 1 Kg 174.00
Sand for CM(1:8) 0.20 Cum 940.79 1 Cum 188.16
B .LABOUR
Mason 1st class 3.00 Nos 420.00 1 Each 1260.00
Mason 2nd class 1.00 Nos 375.00 1 Each 375.00
Mazdoor(un skilled) 8.00 Nos 320.00 1 Each 2560.00
Add for MA @ 25% 0.25 4195.00 1048.75
Add water charges 1% 0.01 35059.80 350.60
Rate for 10sqm 35410.40

Rate for other Floors FF SF TF 4F

Rate as worked out above 35410.40 35410.40 35410.40 35410.40
Lift charges ( Page 131 of Std. Data ) 0.00 419.50 839.00 1258.50
Add for MA @ 25% 0.00 104.88 209.75 314.63
35410.40 35934.78 36459.15 36983.53
Overheads&Contractors Profit @13.615% 4821.13 4892.52 4963.91 5035.31
Rate per 10 Sqm 40231.53 40827.30 41423.06 42018.84
Rate per 1 Sqm 4023.15 4082.73 4142.31 4201.88
Say 4023 4083 4142 4202

50 Flooring with 16 to 18 mm thick high polished granite stone slabs black colour as approved by the
Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm
thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of
honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with
pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand ,
water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the
edge , polishing charges and all other taxes on all materials, cost of base coat and overheads &
contractors profit complete for finished item of work for platforms (S.S.701 & special)

(BLD-CSTN-9-7)
Unit = 10 sqm.
A. MATERIALS:
High polished granite slabs black 16 to
18mm thick 10.50 Sqm 2352.00 1 Sqm 24696.00
Cement for CM(1:8) for base coat 36.00 Kgs 5802.83 1000 Kgs 208.90
 CIVIL DATA : Page-49

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Cement for slurry 33.00 Kgs 5802.83 1000 Kgs 191.49
White cement for jointing 6.00 Kgs 29.00 1 Kg 174.00
Sand for CM(1:8) 0.20 Cum 940.79 1 Cum 188.16
B .LABOUR
Mason 1st class 3.00 Nos 420.00 1 Each 1260.00
Mason 2nd class 1.00 Nos 375.00 1 Each 375.00
Mazdoor(un skilled) 8.00 Nos 320.00 1 Each 2560.00
Add for MA @ 25% 0.25 4195.00 1048.75
Machine cutting charges 16.67 RM 15.00 1 RM 250.05
Half rounding the edges 16.67 RM 289.00 1 RM 4817.63
Add for MA @ 25% 0.25 2027.07 506.77
Add water charges 1% 0.01 36276.75 362.77
Rate for 10 sqm 36639.52

Rate for other Floors FF SF TF 4F

Rate as worked out above 36639.52 36639.52 36639.52 36639.52
Lift charges ( Page 131 of Std. Data ) 0.00 419.50 839.00 1258.50
Add for MA @ 25% 0.00 104.88 209.75 314.63
36639.52 37163.89 37688.27 38212.64
Overheads&Contractors Profit @13.615% 4988.47 5059.86 5131.26 5202.65
Rate per 10 Sqm 41627.99 42223.75 42819.53 43415.29
Rate per 1 Sqm 4162.80 4222.38 4281.95 4341.53
Say 4163 4222 4282 4342

51 Granolithic Concrete flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine
crushed metal and screened sand laid over CC bed already laid or RCC roof slab, in alternate panels of
size not exceeding 1.50 m x 1.50 m, using glass strips and finishing the top surface to required
smoothness and slopes and thread lining including cost of all materials like cement, metal sand and water
and overheads & contractors profit complete for finished item of work. (APSS No.701 & 710)
(BLD-CSTN-9-13)
Unit : 10sqm
A.MATERIALS :
6mm to 12mm HBG Metal 0.17 Cum 1347.79 1 Cum 229.12
Cement 120.00 Kgs 5802.83 1000 Kgs 696.34
Sand 0.085 Cum 873.79 1 Cum 74.27
Add for glass strips 10.00 Sqm 8.00 1 Sqm 80.00
B. LABOUR
Mason 1st class 1.25 Nos. 420.00 1 Each 525.00
Mason 2nd class 0.06 Nos. 375.00 1 Each 22.50
Mazdoor (unskiled) 3.00 Nos. 320.00 1 Each 960.00
Add for MA @ 25% 0.25 1507.50 376.88
Add water charges 1% 0.01 2964.11 29.64
Rate per 10 Sqm 2993.75

Rate for other Floors FF SF TF 4F

Rate as worked out above 2993.75 2993.75 2993.75 2993.75
Lift charges ( Page 131 of Std. Data ) 0.00 150.75 301.50 452.25
Add for MA @ 25% 0.00 37.69 75.38 113.06
2993.75 3182.19 3370.63 3559.06
Overheads&Contractors Profit @13.615% 407.60 433.26 458.91 484.57
Rate per 10 Sqm 3401.35 3615.45 3829.54 4043.63
Rate per 1 Sqm 340.14 361.54 382.95 404.36
Say 340 362 383 404
 CIVIL DATA : Page-50

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
52 Flooring with chequered cement concrete heavy duty tiles confirming to IS:13801 using aggregates,
cement, pigments of size 300mm x 300mm and thickness 25mm of any shade as approved by Engineer
- In - Charge set over base coat of cement mortar (1:6), 12 mm thick using screened sand over CC bed
alredy laid or RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 kgs per
sqm and jointed with neat white cement to full depth mixed with pigment of matching shade including cost
and conveyance of all materials like cement, sand, water and tiles etc.,and overheads & contractors profit
complete for finished item of work.

(BLD-CSTN-9-4)
Unit : 10sqm
A.MATERIALS :
Chequred tiles 25mm thick 10.50 sqm 302.00 1 sqm 3171.00
Cement for CM(1:6) proportion for base
coat 28.80 Kgs 5802.83 1000 Kgs 167.12
Cement for slurry 33.00 Kgs 5802.83 1000 Kgs 191.49
White cement for jointing & pointing 2.00 Kgs 29.00 1.00 Kgs 58.00
Sand for CM(1:6) proportion 0.12 Cum 940.79 1 Cum 112.89
B. LABOUR
Mason 1st class 0.96 Nos. 420.00 1 Each 403.20
Mason 2nd class 2.24 Nos. 375.00 1 Each 840.00
Mazdoor (unskiled) 3.30 Nos. 320.00 1 Each 1056.00
Add for MA @ 25% 0.25 2299.20 574.80
Add water charges 1% 0.01 6574.51 65.75
Rate per 10 Sqm 6640.25

Rate for other Floors FF SF TF 4F

Rate as worked out above 6640.25 6640.25 6640.25 6640.25
Lift charges ( Page 131 of Std. Data ) 0.00 229.92 459.84 689.76
Add for MA @ 25% 0.00 57.48 114.96 172.44
6640.25 6927.65 7215.05 7502.45
Overheads&Contractors Profit @13.615% 904.07 943.20 982.33 1021.46
Rate per 10 Sqm 7544.32 7870.85 8197.38 8523.91
Rate per 1 Sqm 754.43 787.09 819.74 852.39
Say 754 787 820 852

53 Providing polished shahabad / Tandur stone slabs of 15mm to 18mm thick in single piece as
specified set over a base coat of CM (1:5) , 12mm thick using screened sand over already laid CC bed /
RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and
jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand,
water, flooring stones etc. complete including sales & other taxes on all materials including all labour
charges like dressing of flooring stones to the required size, flat nosing the edges, mixing of cement
mortar, laying, lift charges , cost of base coat, water charges etc., and overheads & contractors profit
complete for finished item of work for treads and risers. (APSS No.703 & 701)

a) Treads of 0.30m wide :

(BLD-CSTN-9-1)
Unit = 10 sqm.
A. MATERIALS:
Polished shahabad stone 15 to 18mm thick 11.00 Sqm 1938.19 10 Sqm 2132.01
Cement for CM (1:5) proportion for base
coat 34.56 Kgs 5802.83 1000 Kgs 200.55
Cement for slurry 33.00 Kgs 5802.83 1000 Kgs 191.49
Cement for jointing 20.00 Kgs 5802.83 1000 Kgs 116.06
Sand for CM(1:5) 0.12 Cum 940.79 1 Cum 112.89
B .LABOUR
Mason 1st class 3.10 Nos 420.00 1 Each 1302.00
 CIVIL DATA : Page-51

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Mason 2nd class 1.10 Nos 375.00 1 Each 412.50
Mazdoor(un skilled) 0.86 Nos 320.00 1 Each 275.20
Add for MA @ 25% 0.25 1989.70 497.43
Flat nosing the edges 33.33 RM 45.00 1 RM 1499.85
Add for MA @ 25% 0.25 599.94 149.99
Add water charges 1% 0.01 6889.96 68.90
Rate for 10sqm 6958.86

Rate for other floors FF SF TF 4F

Rate as worked out above 6958.86 6958.86 6958.86 6958.86
Lift charges ( Page 131 of Std. Data ) 0.00 198.97 397.94 596.91
Add for MA @ 25% 0.00 49.74 99.49 149.23
6958.86 7207.57 7456.28 7705.00
Overheads&Contractors Profit @13.615% 947.45 981.31 1015.17 1049.04
Rate per 10 Sqm 7906.31 8188.88 8471.45 8754.04
Rate per 1 Sqm 790.63 818.89 847.15 875.40
Say 791 819 847 875

b) Risers of 0.15m height :

(BLD-CSTN-9-23)
Unit = 10 sqm
A.MATERIALS :
Cost of shahabad stone slabs 11.00 sqm 1938.19 10 sqm 2132.01
Sand for CM(1:5) base coat 0.12 cum 940.79 1 cum 112.89
Cement for CM(1:5) base coat 34.56 Kgs 5802.83 1000 Kgs 200.55
Cement for slurry 33.00 Kgs 5802.83 1000 Kgs 191.49
B.LABOUR
Mason 1st class 0.96 Nos. 420.00 1 Each 403.20
Mason 2nd class 2.24 Nos. 375.00 1 Each 840.00
Mazdoor(unskilled) 3.10 Nos. 320.00 1 Each 992.00
Add for MA @ 25% 0.25 2235.20 558.80
Add water charges 1% 0.01 5430.94 54.31
Rate for 10 sqm 5485.25

Rate for other Floors FF SF TF 4F

Rate as worked out above 5485.25 5485.25 5485.25 5485.25
Lift charges ( Page 131 of Std. Data ) 0.00 223.52 447.04 670.56
Add for MA @ 25% 0.00 55.88 111.76 167.64
5485.25 5764.65 6044.05 6323.45
Overheads&Contractors Profit @13.615% 746.82 784.86 822.90 860.94
Rate per 10 Sqm 6232.07 6549.51 6866.95 7184.39
Rate per 1 Sqm 623.21 654.95 686.70 718.44
Say 623 655 687 718

54 Providing Polished black Kadapa slabs minimum of 15mm thick in single piece as specified set over a
base coat of CM (1:5) , 12mm thick using screened sand over already laid CC bed / RCC roof slab
including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat
cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring
stones etc. complete including sales & other taxes on all materials including all labour charges like
dressing of flooring stones to the required size, flat nosing the edges, mixing of cement mortar, laying, lift
charges , cost of base coat, water charges etc., and overheads & contractors profit complete for finished
item of work for treads and risers. (APSS No.703 & 701)

a) Treads of 0.30m wide :

(BLD-CSTN-9-1)
 CIVIL DATA : Page-52

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Unit = 10 sqm.
A. MATERIALS:
Polished black Kadapa slabs minimum of
15mm thick 11.00 Sqm 2919.63 10 Sqm 3211.59
Cement for CM (1:5) proportion for base 34.56 Kgs 5802.83 1000 Kgs 200.55
coat
Cement for slurry 33.00 Kgs 5802.83 1000 Kgs 191.49
Cement for jointing 20.00 Kgs 5802.83 1000 Kgs 116.06
Sand for CM(1:5) 0.12 Cum 940.79 1 Cum 112.89
B .LABOUR
Mason 1st class 3.10 Nos 420.00 1 Each 1302.00
Mason 2nd class 1.10 Nos 375.00 1 Each 412.50
Mazdoor(un skilled) 0.86 Nos 320.00 1 Each 275.20
Add for MA @ 25% 0.25 1989.70 497.43
Flat nosing the edges 33.33 RM 45.00 1 RM 1499.85
Add for MA @ 25% 0.25 599.94 149.99
Add water charges 1% 0.01 7969.54 79.70
Rate for 10sqm 8049.24

Rate for other floors FF SF TF 4F

Rate as worked out above 8049.24 8049.24 8049.24 8049.24
Lift charges ( Page 131 of Std. Data ) 0.00 198.97 397.94 596.91
Add for MA @ 25% 0.00 49.74 99.49 149.23
8049.24 8297.95 8546.66 8795.38
Overheads&Contractors Profit @13.615% 1095.90 1129.77 1163.63 1197.49
Rate per 10 Sqm 9145.14 9427.72 9710.29 9992.87
Rate per 1 Sqm 914.51 942.77 971.03 999.29
Say 915 943 971 999

b) Risers of 0.15m height :

(BLD-CSTN-9-23)
Unit = 10 sqm
A.MATERIALS :
Cost of Kadapa stone slabs 11.00 sqm 2919.63 10 sqm 3211.59
Sand for CM(1:5) base coat 0.12 cum 940.79 1 cum 112.89
Cement for CM(1:5) base coat 34.56 Kgs 5802.83 1000 Kgs 200.55
Cement for slurry 33.00 Kgs 5802.83 1000 Kgs 191.49
B.LABOUR
Mason 1st class 0.96 Nos. 420.00 1 Each 403.20
Mason 2nd class 2.24 Nos. 375.00 1 Each 840.00
Mazdoor(unskilled) 3.10 Nos. 320.00 1 Each 992.00
Add for MA @ 25% 0.25 2235.20 558.80
Add water charges 1% 0.01 6510.53 65.11
Rate for 10 sqm 6575.63

Rate for other Floors FF SF TF 4F

Rate as worked out above 6575.63 6575.63 6575.63 6575.63
Lift charges ( Page 131 of Std. Data ) 0.00 223.52 447.04 670.56
Add for MA @ 25% 0.00 55.88 111.76 167.64
6575.63 6855.03 7134.43 7413.83
Overheads&Contractors Profit @13.615% 895.27 933.31 971.35 1009.39
Rate per 10 Sqm 7470.90 7788.34 8105.78 8423.22
Rate per 1 Sqm 747.09 778.83 810.58 842.32
Say 747 779 811 842
 CIVIL DATA : Page-53

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
55 Providing 16 to 18mm thick high polished granite stone slabs other than black and regular colours
(i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as
per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of
cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab
including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly
with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance
of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental
labour & lift charges, half rounding the edges of treads , polishing charges and all other taxes on all
materials, cost of base coat and overheads & contractors profit complete for finished item of work for
treads and risers (S.S.701 & special)

a) Treads of 0.30m wide :

(BLD-CSTN-9-7)
Unit = 10 sqm.
A. MATERIALS:
High polished granite slabs other than
black 16 to 18mm thick 10.50 Sqm 2767.00 1 Sqm 29053.50
Cement for CM(1:5) for base coat 34.56 Kgs 5802.83 1000 Kgs 200.55
Cement for slurry 33.00 Kgs 5802.83 1000 Kgs 191.49
White cement for jointing 6.00 Kgs 29.00 1 Kg 174.00
Sand for CM(1:5) 0.12 Cum 940.79 1 Cum 112.89
B .LABOUR
Mason 1st class 3.00 Nos 420.00 1 Each 1260.00
Mason 2nd class 1.00 Nos 375.00 1 Each 375.00
Mazdoor(un skilled) 8.00 Nos 320.00 1 Each 2560.00
Add for MA @ 25% 0.25 4195.00 1048.75
Machine cutting charges 33.33 RM 15.00 1 RM 499.95
Half rounding the edges 33.33 RM 289.00 1 RM 9632.37
Add for MA @ 25% 0.25 4052.93 1013.23
Add water charges 1% 0.01 46121.74 461.22
Rate for 10sqm 46582.95
Rate for other Floors FF SF TF 4F
Rate as worked out above 46582.95 46582.95 46582.95 46582.95
Lift charges ( Page 131 of Std. Data ) 0.00 419.50 839.00 1258.50
Add for MA @ 25% 0.00 104.88 209.75 314.63
46582.95 47107.33 47631.70 48156.08
Overheads&Contractors Profit @13.615% 6342.27 6413.66 6485.06 6556.45
Rate per 10 Sqm 52925.22 53520.99 54116.76 54712.53

Rate per 1 Sqm 5292.52 5352.10 5411.68 5471.25

Say 5293 5352 5412 5471

b) Risers of 0.15m height :

(BLD-CSTN-9-19)
Unit = 10 sqm
A.MATERIALS :
Cost of high polished granite 10.50 sqm 2767.00 1 sqm 29053.50
Sand for CM(1:5) base coat 0.12 cum 940.79 1 cum 112.89
Cement for CM(1:5) base coat 34.56 Kgs 5802.83 1000 Kgs 200.55
Cement for slurry 33.00 Kgs 5802.83 1000 Kgs 191.49
White cement for jointing & pointing 5.00 Kgs 29.00 1 Kg 145.00
Machine cutting charges 66.67 RM 15.00 1 RM 1000.05
Add for MA @ 25% 0.25 400.02 100.01
B.LABOUR
Mason 1st class 2.10 Nos. 420.00 1 Each 882.00
Man Mazdoor(Beldar) 4.90 Nos. 320.00 1 Each 1568.00
Add for MA @ 25% 0.25 2450.00 612.50
 CIVIL DATA : Page-54

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Add water charges 1% 0.01 33865.99 338.66
Rate for 10 sqm 34204.65

Rate for other Floors FF SF TF 4F

Rate as worked out above 34204.65 34204.65 34204.65 34204.65
Lift charges ( Page 131 of Std. Data ) 0.00 245.00 490.00 735.00
Add for MA @ 25% 0.00 61.25 122.50 183.75
34204.65 34510.90 34817.15 35123.40
Overheads&Contractors Profit @13.615% 4656.96 4698.66 4740.35 4782.05
Rate per 10 Sqm 38861.61 39209.56 39557.50 39905.45
Rate per 1 Sqm 3886.16 3920.96 3955.75 3990.54
Say 3886 3921 3956 3991

56 Providing skirting to internal walls to 10.00 cm height with Polished Shahabad/Tandur stone slabs
15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using
screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and
jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all
materials like tiles, cement, sand and water etc., complete and overheads & contractors profit complete for
finished item of work.(APSS No.701 &707)
(BLD-CSTN-9-23)
Unit = 10 sqm
A.MATERIALS :
Cost of shahabad stone slabs 11.00 sqm 1938.19 10 sqm 2132.01
Sand for CM(1:5) base coat 0.12 cum 940.79 1 cum 112.89
Cement for CM(1:5) base coat 34.56 Kgs 5802.83 1000 Kgs 200.55
Cement for slurry 33.00 Kgs 5802.83 1000 Kgs 191.49
B.LABOUR
Mason 1st class 0.96 Nos. 420.00 1 Each 403.20
Mason 2nd class 2.24 Nos. 375.00 1 Each 840.00
Mazdoor(unskilled) 3.10 Nos. 320.00 1 Each 992.00
Add for MA @ 25% 0.25 2235.20 558.80
Add water charges 1% 0.01 5430.94 54.31
Rate for 10 sqm 5485.25

Rate for other Floors FF SF TF 4F

Rate as worked out above 5485.25 5485.25 5485.25 5485.25
Lift charges ( Page 131 of Std. Data ) 0.00 223.52 447.04 670.56
Add for MA @ 25% 0.00 55.88 111.76 167.64
5485.25 5764.65 6044.05 6323.45
Overheads&Contractors Profit @13.615% 746.82 784.86 822.90 860.94
Rate per 10 Sqm 6232.07 6549.51 6866.95 7184.39
Rate per 1 RM 62.32 65.50 68.67 71.84
Say 62 65 69 72

57 Providing skirting to internal walls to 10.00 cm height with Polished Kadapa stone slabs minimum
of 15mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened
sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with
white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like
tiles, cement, sand and water etc., complete and overheads & contractors profit complete for finished item
of work.(APSS No.701 &707)

(BLD-CSTN-9-23)
Unit = 10 sqm
A.MATERIALS :
Cost of Kdapa stone slabs 11.00 sqm 1946.42 10 sqm 2141.06
 CIVIL DATA : Page-55

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Sand for CM(1:5) base coat 0.12 cum 940.79 1 cum 112.89
Cement for CM(1:5) base coat 34.56 Kgs 5802.83 1000 Kgs 200.55
Cement for slurry 33.00 Kgs 5802.83 1000 Kgs 191.49
B.LABOUR
Mason 1st class 0.96 Nos. 420.00 1 Each 403.20
Mason 2nd class 2.24 Nos. 375.00 1 Each 840.00
Mazdoor(unskilled) 3.10 Nos. 320.00 1 Each 992.00
Add for MA @ 25% 0.25 2235.20 558.80
Add water charges 1% 0.01 5440.00 54.40
Rate for 10 sqm 5494.40

Rate for other Floors FF SF TF 4F

Rate as worked out above 5494.40 5494.40 5494.40 5494.40
Lift charges ( Page 131 of Std. Data ) 0.00 223.52 447.04 670.56
Add for MA @ 25% 0.00 55.88 111.76 167.64
5494.40 5773.80 6053.20 6332.60
Overheads&Contractors Profit @13.615% 748.06 786.10 824.14 862.18
Rate per 10 Sqm 6242.46 6559.90 6877.34 7194.78
Rate per 1 RM 62.42 65.60 68.77 71.95
Say 62 66 69 72

58 Providing skirting to internal walls to 10 cm height with non-skid full body ceramic floor tiles of
thickness between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any
colour and finish in all shades and designs as approved by Engineer-in-charge, length equal to flooring
tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like
consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water,
overheads & contractors profit complete for finished item of work.(APSS No.701 &707)
(BLD-CSTN-9-18)
Unit = 10 sqm
A.MATERIALS :
Cost of Edge cut Rectified ceramic tiles 8
mm thick 10.50 sqm 560.00 1 sqm 5880.00
Sand for CM(1:5) base coat 0.12 cum 940.79 1 cum 112.89
Cement for CM(1:5) base coat 34.56 Kgs 5802.83 1000 Kgs 200.55
Cement for slurry 33.00 Kgs 5802.83 1000 Kgs 191.49
White cement for jointing & pointing 6.00 Kgs 29.00 1 Kg 174.00
B.LABOUR
Mason 1st class 0.77 Nos. 420.00 1 Each 323.40
Mazdoor(unskilled) 0.80 Nos. 320.00 1 Each 256.00
Add for MA @ 25% 0.25 579.40 144.85
Add water charges 1% 0.01 7283.18 72.83
Rate per 10 Sqm 7356.02

Rate for other Floors FF SF TF 4F

Rate as worked out above 7356.02 7356.02 7356.02 7356.02
Lift charges ( Page 131 of Std. Data ) 0.00 57.94 115.88 173.82
Add for MA @ 25% 0.00 14.49 28.97 43.46
7356.02 7428.44 7500.87 7573.29
Overheads&Contractors Profit @13.615% 1001.52 1011.38 1021.24 1031.10
Rate per 10 Sqm 8357.54 8439.82 8522.11 8604.39
Rate per 1 RM 83.58 84.40 85.22 86.04
Say 84 84 85 86
 CIVIL DATA : Page-56

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
59 Providing skirting to internal walls to 10 cm height with soluble salt porcelain vitrified tiles screen
printed and polished of thickness between 8 to 10mm 1st quality conforming to IS: 13711, IS: 13712, IS:
13630(Parts 1 to 15) of any colour and finish in all shades and designs, length equal to flooring tiles, set
over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency
spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of
matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and
overheads & contractors profit complete for finished item of work.(APSS No.701 &707)

(BLD-CSTN-9-20)
Unit = 10 sqm
Cost of vitrified tiles 8-10mm thick 10.50 sqm 635.00 1 sqm 6667.50
Sand for CM(1:5) base coat 0.12 cum 940.79 1 cum 112.89
Cement for CM(1:5) base coat 34.56 Kgs 5802.83 1000 Kgs 200.55
Cement for slurry 33.00 Kgs 5802.83 1000 Kgs 191.49
White cement for jointing & pointing 2.00 Kgs 29.00 1 Kg 58.00

B.LABOUR
Mason 1st class 0.77 Nos. 420.00 1 Each 323.40
Mazdoor(unskilled) 0.80 Nos. 320.00 1 Each 256.00
Add for MA @ 25% 0.25 579.40 144.85
Add water charges 1% 0.01 7954.68 79.55
Rate for 10 sqm 8034.23

Rate for other Floors FF SF TF 4F

Rate as worked out above 8034.23 8034.23 8034.23 8034.23
Lift charges ( Page 131 of Std. Data ) 0.00 57.94 115.88 173.82
Add for MA @ 25% 0.00 14.49 28.97 43.46
8034.23 8106.66 8179.08 8251.51
Overheads&Contractors Profit @13.615% 1093.86 1103.72 1113.58 1123.44
Rate per 10 Sqm 9128.09 9210.38 9292.66 9374.95
Rate per 1 RM 91.28 92.10 92.93 93.75
Say 91 92 93 94

60 a) Providing skirting to internal walls to 10 cm height with 8mm thick mirror polished granite tiles
length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement
slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste
mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand
and water etc., and overheads & contractors profit complete for finished item of work.(APSS No.701 &707)

(BLD-CSTN-9-21)
Unit = 10 sqm
A.MATERIALS :
Cost of granite tiles 8mm thick 10.50 sqm 1079.00 1 sqm 11329.50
Sand for CM(1:5) base coat 0.12 cum 940.79 1 cum 112.89
Cement for CM(1:5) base coat 34.56 Kgs 5802.83 1000 Kgs 200.55
Cement for slurry 33.00 Kgs 5802.83 1000 Kgs 191.49
White cement for jointing & pointing 5.00 Kgs 29.00 1 Kg 145.00
B.LABOUR
Mason 1st class 0.77 Nos. 420.00 1 Each 323.40
Mazdoor(unskilled) 0.80 Nos. 320.00 1 Each 256.00
Add for MA @ 25% 0.25 579.40 144.85
Add water charges 1% 0.01 12703.68 127.04
Rate for 10 sqm 12830.72

Rate for other Floors FF SF TF 4F

Rate as worked out above 12830.72 12830.72 12830.72 12830.72
 CIVIL DATA : Page-57

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Lift charges ( Page 131 of Std. Data ) 0.00 57.94 115.88 173.82
Add for MA @ 25% 0.00 14.49 28.97 43.46
12830.72 12903.15 12975.57 13048.00
Overheads&Contractors Profit @13.615% 1746.90 1756.76 1766.62 1776.48
Rate per 10 Sqm 14577.62 14659.91 14742.19 14824.48
Rate per 1 RM 145.78 146.60 147.42 148.24
Say 146 147 147 148

b) Cladding to internal walls with 8mm thick mirror polished granite tiles length equal to flooring tiles,
set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like
consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with
pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water
etc., and overheads & contractors profit complete for finished item of work.(APSS No.701 &707)

Rate for other Floors FF SF TF 4F

Rate as worked out above 12830.72 12830.72 12830.72 12830.72
Lift charges ( Page 131 of Std. Data ) 0.00 57.94 115.88 173.82
Add for MA @ 25% 0.00 14.49 28.97 43.46
12830.72 12903.15 12975.57 13048.00
Overheads&Contractors Profit @13.615% 1746.90 1756.76 1766.62 1776.48
Rate per 10 Sqm 14577.62 14659.91 14742.19 14824.48
Rate per 1 Sqm 1457.76 1465.99 1474.22 1482.45
Say 1458 1466 1474 1482

61 a) Providing skirting to internal walls 10cm height with High Polished Granite 16 to 18 mm thick up to
8'-00 (2.43 M) other than black and regular colours, length equal to flooring slabs set over base coat of
CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate
of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full
depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors
profit complete for finished item of work.

(BLD-CSTN-9-19)
Unit = 10 sqm
A.MATERIALS :
Cost of high polished granite 10.50 sqm 2767.00 1 sqm 29053.50
Sand for CM(1:5) base coat 0.12 cum 940.79 1 cum 112.89
Cement for CM(1:5) base coat 34.56 Kgs 5802.83 1000 Kgs 200.55
Cement for slurry 33.00 Kgs 5802.83 1000 Kgs 191.49
White cement for jointing & pointing 5.00 Kgs 29.00 1 Kg 145.00
Machine cutting charges 66.67 RM 15.00 1 RM 1000.05
Add for MA @ 25% 0.25 400.02 100.01
B.LABOUR
Mason 1st class 2.10 Nos. 420.00 1 Each 882.00
Man Mazdoor(Beldar) 4.90 Nos. 320.00 1 Each 1568.00
Add for MA @ 25% 0.25 2450.00 612.50
Add water charges 1% 0.01 33865.99 338.66
Rate for 10 sqm 34204.65

Rate for other Floors FF SF TF 4F

Rate as worked out above 34204.65 34204.65 34204.65 34204.65
Lift charges ( Page 131 of Std. Data ) 0.00 245.00 490.00 735.00
Add for MA @ 25% 0.00 61.25 122.50 183.75
34204.65 34510.90 34817.15 35123.40
Overheads&Contractors Profit @13.615% 4656.96 4698.66 4740.35 4782.05
Rate per 10 Sqm 38861.61 39209.56 39557.50 39905.45
Rate per 1 RM 388.62 392.10 395.57 399.05
 CIVIL DATA : Page-58

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Say 389 392 396 399

b) Providing cladding to walls with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other
than black and regular colours, length equal to flooring slabs set over base coat of CM(1:5) 12 mm thick
using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm
and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of
all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for
finished item of work.

Rate for other Floors FF SF TF 4F

Rate as worked out above 34204.65 34204.65 34204.65 34204.65
Lift charges ( Page 131 of Std. Data ) 0.00 245.00 490.00 735.00
Add for MA @ 25% 0.00 61.25 122.50 183.75
34204.65 34510.90 34817.15 35123.40
Overheads&Contractors Profit @13.615% 4656.96 4698.66 4740.35 4782.05
Rate per 10 Sqm 38861.61 39209.56 39557.50 39905.45
Rate per 1 Sqm 3886.16 3920.96 3955.75 3990.54
Say 3886 3921 3956 3991

62 Providing dadooing to walls with glazed full body ceramic tiles of any size and thickness between 5 to
7mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Parts 1 to 15) of any colour and finish in all
shades and designs with borders as approved by Engineer-in-Charge set over base coat of CM(1:5) 12
mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs
per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including
cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for
finished item of work.
(BLD-CSTN-9-18)
Unit = 10 sqm
A.MATERIALS :
Cost of glazed coloured tiles 10.50 sqm 430.00 1 sqm 4515.00
Sand for CM(1:5) base coat 0.12 cum 940.79 1 cum 112.89
Cement for CM(1:5) base coat 34.56 Kgs 5802.83 1000 Kgs 200.55
Cement for slurry 33.00 Kgs 5802.83 1000 Kgs 191.49
White cement for jointing & pointing 6.00 Kgs 29.00 1 Kg 174.00
B.LABOUR
Mason 1st class 0.77 Nos. 420.00 1 Each 323.40
Mazdoor(unskilled) 0.80 Nos. 320.00 1 Each 256.00
Add for MA @ 25% 0.25 579.40 144.85
Add water charges 1% 0.01 5918.18 59.18
Rate for 10 sqm 5977.37

Rate for other Floors FF SF TF 4F

Rate as worked out above 5977.37 5977.37 5977.37 5977.37
Lift charges ( Page 131 of Std. Data ) 0.00 57.94 115.88 173.82
Add for MA @ 25% 0.00 14.49 28.97 43.46
5977.37 6049.79 6122.22 6194.64
Overheads&Contractors Profit @13.615% 813.82 823.68 833.54 843.40
Rate per 10 Sqm 6791.19 6873.47 6955.76 7038.04
Rate per 1 Sqm 679.12 687.35 695.58 703.80
Say 679 687 696 704

63 Filling with light weight concrete in Cement Concrete (1:5:10) proportion using brick jelly for low roofs
including cost and conveyance of all materials like cement, sand, brick bats etc., to site including cost of
all labour charges for laying concrete, ramming, curing , overheads & contractors profit etc., complete for
finished item of work. (APSS. No. 402)

(BLD-CSTN-3-7)
 CIVIL DATA : Page-59

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Unit: 1 Cum
A. Materials :-
Cement 129.60 Kgs 5802.83 1000 Kgs 752.05
Cost of brick jelly 20mm size(1/3rd rate) 460 Nos. 5419.96 1000 Nos. 831.06
Fine aggregate ( Sand ) 0.45 Cum 873.79 1 Cum 393.21
Water (including curing) 1.20 kl 103.00 1 kl 123.60
B.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 131.90 1 hour 131.90
Crew Charges 1.00 hour 206.70 1 hour 206.70
Add MA on crew charges 0.25 206.70 51.68
C.LABOUR :
1st class mason 0.10 Nos. 420.00 1 Each 42.00
Mazdoor (unskilled) 1.39 Nos. 320.00 1 Each 444.80
Add for MA @ 25% 0.25 486.80 121.70
3098.69

Rate for other Floors FF SF TF 4F

Rate as above 3098.69 3098.69 3098.69 ###
Lift charges ( Page 131 of Std. Data ) 0.00 48.68 97.36 146.04
Add for MA @ 25% 0.00 12.17 24.34 36.51
Rate per 1 cum 3098.69 3159.54 3220.39 ###
Overheads&Contractors Profit @13.615% 421.89 430.17 438.46 446.74
Rate per 1 cum 3520.58 3589.71 3658.85 ###
Say 3521 3590 3659 3728

64 Reinforced cement concrete (1:5:10) proportion (Cement: fine aggregates: coarse aggregate) using
40mm size (SS5) hard granite metal (coarse aggregate) from approved quarry including cost and
conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site
including centering using Casurina Ballies , Bamboos , Wooden Reapers , Runners , Wood Posts , Wall
Plates etc., shuttering, machine mixing, laying concrete, lifting concrete manually , curing etc., and
overheads & contractors profit complete as per drawings but excluding cost of steel and it's fabrication
charges for finished item of work (APSS NO. 402 & 403) for Dummy columns.

(BLDS-CSTN-3-13)
Unit: 1 Cum
A.MATERIALS :
Cement 129.60 Kgs 5802.83 1000 Kgs 752.05
40mm HBG metal 0.90 Cum 1200.59 1 Cum 1080.53
Sand 0.45 Cum 873.79 1 Cum 393.21
B.LABOUR :
1st class Mason 0.167 Nos 420.00 1 Each 70.14
2nd class Mason 0.167 Nos 375.00 1 Each 62.63
Mazdoor (unskilled) 4.70 Nos 320.00 1 Each 1504.00
Add for MA @ 25% 0.25 1636.77 409.19
C.MACHINERY :
Concrete Mixer 10 / 7 cft (0.2 / 0.8
cum)capacity 1.00 hour 131.90 1 hour 131.90
Crew charges 1.00 hour 206.70 1 hour 206.70
Needle vibrator 40mm ( petrol ) 1.00 hour 26.60 1 hour 26.60
Crew charges 1.00 hour 148.80 1 hour 148.80
Add MA on crew charges 0.25 355.50 88.88
Water(including for curing) 1.20 kl 103.00 1 kl 123.60
Basic cost per 1cum 4998.21
 CIVIL DATA : Page-60

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Rate for other Floors SF TF
Rate as above 4998.21 4998.21
Hire charges of centering and scaffolding 229.00 229.00
Labour , lift charges for scaffolding 1472.00 1606.00
Add for MA @ 25% 368.00 401.50
Lift charges 163.68 327.35
Add for MA @ 25% 40.92 81.84
Rate per 1 cum 7271.81 7643.90
Overheads&Contractors Profit @13.615% 990.06 1040.72
8261.87 8684.62
Say 8262 8685

65 Supplying and fixing of stainless steel ( grade 304 ) hand railing as per approved drawing with top rail
of 50mm dia pipe and 2mm thick medium class and vertical posts of 25mm dia and 1.6mm thick medium
class 2 Nos for each step fixed with base plate of 75mm dia using bonding agent and anchor fastner and
welding, drilling of 20mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all
members of the railing thouroughly , lacquer finishing to present seamless finish including cost and
conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges ,
overheads & contractors profit etc., complete for finished item of work.

For a flight length of 4.60 M. 4.60 RM

Cost of 50mm dia SS pipe (1x4.60) 4.60 RM
Cost of 25mm dia SS pipe (26x0.90) 23.40 RM
50.00mm pipe (4.60 x 2.39 Kgs/RM) 10.99 Kgs
25mm pipe (23.40x 0.89 Kgs/RM) 20.83 Kgs
Cost of stainless steel pipes 31.82 Kgs 391.00 1 Kg 12441.62
Labour charges for fabrication 31.82 Kgs 119.00 1 Kg 3786.58
Drilling of 20mm dia hole(13 x 0.10) 1.30 RM 154.00 1 RM 200.20
Base Plate 75mm dia. 13 Nos. 80.00 1 Each 1040.00
Add for anchor bars 13 Nos. 30.00 1 No 390.00
Add for bonding 13 Nos. 15.00 1 No 195.00
18053.40
Rate per 1 RM 3924.65
Rate per 1 Sqm 4360.72
Overheads&Contractors Profit @13.615% 0.13615 4360.72 593.71
4954.44
say 4954

66 Providing 110 mm Dia ISI marked PVC down water take pipes with socket , 2.5mm thick 4.0 kg/sq.cm
pressure of ISI marked including cost of necessary PVC Bends, shoes, iron / PVC clamps and all other
accessories and fixing in position including cost and conveyance of all materials, sales & other taxes on
materials to site, operational & incidental charges including all labour charges for fixing at site etc., and
overheads & contractors profit complete for finished item of work. (APSS No. 1328)

PVC pipe 110mm dia 6.00 RM 162.00 1 RM 972.00

MS Clamps 3 Nos. 18.00 1 Each 54.00
Labour charges for fixing pipes 6.00 RM 70.00 1 RM 420.00
Rate per 6 RM 1446.00
241.00
Overheads&Contractors Profit @13.615% 0.13615 241.00 32.81
Rate per 1 RM 273.81
Say 274

67 Supply and fixing jallies ( cement concrete ) of 50mm thick as per the design approved by the
Engineer-in-Charge including cost and conveyance of materials to site and labour charges etc., overheads
& contractors profit complete for finished item of work.
 CIVIL DATA : Page-61

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)

Cost of 50mm thick jali 1.00 sqm 402.00 1 sqm 402.00

1st class mason 0.06 Nos. 420.00 1 Each 25.20
2nd class mason 0.06 Nos. 375.00 1 Each 22.50
Mazdoor(unskilled) 0.275 Nos. 320.00 1 Each 88.00
Add for MA @ 25% 0.25 135.70 33.93
571.63
Rate for other Floors FF SF TF 4F
Rate as worked out above 571.63 571.63 571.63 571.63
Hire charges for Access Scaffolding 9.93 9.93 9.93 9.93
Labour charges for scaffolding 61.83 87.78 113.70 139.70
Add for MA @ 25% 15.46 21.95 28.43 34.93
Lift charges ( Page 131 of Std. Data ) 0.00 1.36 2.71 4.07
Add for MA @ 25% 0.00 0.34 0.68 1.02
Rate for 1 sqm 658.84 692.98 727.07 761.27
Overheads&Contractors Profit @13.615% 89.70 94.35 98.99 103.65
Rate per 1 sqm 748.54 787.33 826.06 864.92
Say 749 787 826 865

68 White washing two coats with white cement to ceiling to give an even shade after thouroughly
brushing the surface to remove all dirt and remains of loose powdered materials including cost of all
materials , labour charges and incidental such as scaffolding , lift charges etc., and overheads &
contractors profit complete for finished item of work in all floors.
(BLD-CSTN-11-5)
Unit : 10 sqm
A.MATERIALS :
White cement 2.00 kgs 29.00 1 kgs 58.00
B.LABOUR :
Painter 1st class 0.063 Nos. 480.00 1 Each 30.24
Painter 2nd class 0.147 Nos. 375.00 1 Each 55.13
Mazdoor(unskilled) 0.32 Nos. 320.00 1 Each 102.40
Add for MA @ 25% 0.25 187.77 46.94
Sundries including brushes , ladders etc.,
@ 1% 1% 292.71 2.93
Rate per 10 sqm 295.63
Overheads&Contractors Profit @13.615% 0.13615 295.63 40.25
Rate per 10 sqm 335.88
Rate per 1 sqm 33.59
Say 34

69 Providing and applying Wall putty of White Cement or Polymer or Cement based of average 1 to 2
mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the
surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the
surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3
hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of
all materials to work site and all operational, incidental, labour charges, over heads and contractors profit
etc., complete for finished item of work in all floors for Internal walls

(As per Amendment in SoR 2011-12)

Unit = 10 Sqm
wall putty 23.00 Kgs 875.00 20 Kg 1006.25
Painter 1st class 0.273 Nos. 480.00 1 Each 131.04
 CIVIL DATA : Page-62

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Painter 2nd class 0.637 Nos. 375.00 1 Each 238.88
Mazdoor 0.91 Nos. 320.00 1 Each 291.20
Add for MA @ 25% 0.25 661.12 165.28
Sundries for emery papers, fillers, knife
etc., @ 1% 0.01 1832.64 18.33
1850.97
Overheads&Contractors Profit @13.615% 0.13615 1850.97 252.01
Rate per 10 sqm 2102.98
Rate per 1 sqm 210.30
Say 210

70 Providing and applying PMCC / Deco orient base or Equivalent exterior Texture of average 2 to 3 mm
thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the
surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the
surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for
2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all
operational, incidental, labour charges, scaffolding charges, overheads and contractors profit etc.,
complete for finished item of work in all floors for external walls

(As per Amendment in SoR 2011-12)

Unit = 10 Sqm
exterior texture 34.50 Kgs 1000.00 25 Kg 1380.00
Painter 1st class 0.273 Nos. 480.00 1 Each 131.04
Painter 2nd class 0.637 Nos. 375.00 1 Each 238.88
Mazdoor 0.91 Nos. 320.00 1 Each 291.20
Add for MA @ 25% 0.25 661.12 165.28
Sundries for emery papers, fillers, knife
etc., @ 1% 0.01 2206.39
Hire charges for Access Scaffolding 10 sqm 0.99 1 sqm 9.90
Labour charges for scaffolding 10 sqm 6.18 1 sqm 61.80
Add for MA @ 25% 0.25 61.80 15.45
2293.54
Overheads&Contractors Profit @13.615% 0.13615 2293.54 312.27
Rate per 10 sqm 2605.81
Rate per 1 sqm 260.58
Say 261

71 Painting to new walls with 2 coats of Acrylic based Oil bound Washable Distemper having VOC
content less than 50 grams/litre over promer coat using white cemnt as approved by Engineer-In-
Charge, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt
and remains of loose powdered materials, including cost and conveyance of all materials to work site and
all operational, incidental, labour charges etc., and overheads & contractors profit complete for finished
item of work as per APSS 911 for internal walls in all floors.

(BLD-CSTN-12-1)
Unit = 10 Sqm
Cost of white cement 0.50 Kg 29.00 1 Kg 14.50
Painter 1st class 0.08 Nos. 480.00 1 Each 38.40
Painter 2nd class 0.19 Nos. 375.00 1 Each 71.25
Cost of washable oil bound distemper 1.70 Ltrs 90.00 1 Ltr 153.00
Painter 1st class 0.36 Nos. 480.00 1 Each 172.80
Painter 2nd class 0.84 Nos. 375.00 1 Each 315.00
Add for MA @ 25% 0.25 597.45 149.36
Sundries including brushes , ladders etc.,
@ 1% 0.01 914.31 9.14
923.46
 CIVIL DATA : Page-63

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Overheads&Contractors Profit @13.615% 0.13615 923.46 125.73
Rate per 10 sqm 1049.18
Rate per 1 sqm 104.92
Say 105

72 Painting to old walls with 2 coats of Acrylic based Oil bound Washable Distemper having VOC
content less than 50 grams/litre as approved by Engineer-In-Charge, to give an even shade after
thourughly brushing the old surface to remove all dirt and remains of loose powdered materials, including
cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., and
overheads & contractors profit complete for finished item of work as per APSS 911 for internal walls in all
floors.
(BLD-CSTN-11-10)
Unit = 10 Sqm
Cost of washable oil bound distemper 1.70 Ltrs 90.00 1 Ltr 153.00
Painter 1st class 0.36 Nos. 480.00 1 Each 172.80
Painter 2nd class 0.84 Nos. 375.00 1 Each 315.00
Add for MA @ 25% 0.25 487.80 121.95
Sundries including brushes , ladders etc.,
@ 1% 0.01 762.75 7.63
770.38
Overheads&Contractors Profit @13.615% 0.13615 770.38 104.89
Rate per 10 sqm 875.26
Rate per 1 sqm 87.53
Say 88

73 Painting to new walls with 2 coats of water proof cement paint of shade as approved by the Engineer-
In-Charge over a base coat of aproved white cement base coat making 3 coats in all to give an even
shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials,
including cost and conveyance of all materials to work site and all operational, incidental, labour charges
etc., and overheads & contractors profit complete for finished item of work as per SS 912 in all floors
(BLD-CSTN-12-1 & 12-5)
Cost of white cement for base coat 1.00 Kgs 29.00 1 Kgs 29.00
Painter 1st class 0.08 Nos. 480.00 1 Each 38.40
Painter 2nd class 0.19 Nos. 375.00 1 Each 71.25
Water proof cement paint 2.00 Kgs 1375.00 25 Kgs 110.00
Painter 1st class 0.15 Nos. 480.00 1 Each 72.00
Painter 2nd class 0.35 Nos. 375.00 1 Each 131.25
Mazdoor(unskilled) 1.50 Nos. 320.00 1 Each 480.00
Add for MA @ 25% 0.25 792.90 198.23
Sundries including brushes , ladders etc.,
@ 1% 0.01 1130.13 11.30
1141.43
Overheads&Contractors Profit @13.615% 0.13615 1141.43 155.41
Rate per 10 sqm 1296.83
Rate per 1 sqm 129.68
Say 130

74 Painting to old walls with 2 coats of water proof cement paint of shade as approved by the Engineer-
In-Charge to give an even shade after thourughly brushing the surface to remove all dirt and remains of
loose powdered materials, including cost and conveyance of all materials to work site and all operational,
incidental, labour charges etc., and overheads & contractors profit complete for finished item of work as per
SS 912 in all floors.
(BLD-CSTN-12-4)
Water proof cement paint 2.00 Kgs 1375.00 25 Kgs 110.00
 CIVIL DATA : Page-64

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Painter 1st class 0.15 Nos. 480.00 1 Each 72.00
Painter 2nd class 0.35 Nos. 375.00 1 Each 131.25
Mazdoor(unskilled) 1.50 Nos. 320.00 1 Each 480.00
Add for MA @ 25% 0.25 683.25 170.81
Sundries including brushes , ladders etc.,
@ 1% 0.01 964.06 9.64
973.70
Overheads&Contractors Profit @13.615% 0.13615 973.70 132.57
Rate per 10 sqm 1106.27
Rate per 1 sqm 110.63
Say 111

75 Supply & application of one coat water based cement primer of interior grade I and two coats of
acrylic emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for
internal walls including cost and conveyance of all materials to site, sales & other taxes, incidental,
operational and all labour charges etc., and overheads & contractors profit complete for finished item of
work in all floors.
(BLD-CSTN-12-2& Amendment in SoR 2011-12)
Unit 10 Sqm.
A. Materials:-
Cost of cement primer interior grade I 1.00 Kg 165.00 1 Kg 165.00
Painter 1st class 0.21 Nos. 480.00 1 Each 100.80
Painter 2nd class 0.49 Nos. 375.00 1 Each 183.75
Acrylic emulsion paint 0.80 Ltrs 196.00 1 Ltrs 156.80
Painter 1st class 0.36 Nos. 480.00 1 Each 172.80
Painter 2nd class 0.84 Nos. 375.00 1 Each 315.00
Add for MA @ 25% 0.25 772.35 193.09
Sundries including brushes , ladders etc.,
@ 1% 0.01 1287.24 12.87
1300.11
Overheads&Contractors Profit @13.615% 0.13615 1300.11 177.01
Rate per 10 sqm 1477.12
Rate per 1 sqm 147.71
Say 148

76 Supply & application of one coat water based cement primer of exterior grade II and two coats of
acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50
grams/litre for exterior walls including cost and conveyance of all materials to site, sales & other taxes,
incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished
item of work in all floors.
(BLD-CSTN-12-2& Amendment in SoR 2011-12)
Unit 10 Sqm.
A. Materials:-
Cost of cement primer exterior grade II 1.00 Kg 210.00 1 Kg 210.00
Painter 1st class 0.21 Nos. 480.00 1 Each 100.80
Painter 2nd class 0.49 Nos. 375.00 1 Each 183.75
Acrylic emulsion paint 0.80 Ltrs 196.00 1 Ltrs 156.80
Painter 1st class 0.36 Nos. 480.00 1 Each 172.80
Painter 2nd class 0.84 Nos. 375.00 1 Each 315.00
Add for MA @ 25% 0.25 772.35 193.09
Sundries including brushes , ladders etc.,
@ 1% 0.01 1332.24 13.32
Hire charges for Access Scaffolding 10 sqm 0.99 1 sqm 9.90
Labour charges for scaffolding 10 sqm 6.18 1 sqm 61.80
Add for MA @ 25% 0.25 61.80 15.45
 CIVIL DATA : Page-65

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
1432.71
Overheads&Contractors Profit @13.615% 0.13615 1432.71 195.06
Rate per 10 sqm 1627.77
Rate per 1 sqm 162.78
Say 163

77 Painting to new wood work and flush shutters with lappam finish , over a primary coat and painting
two coats of synthetic enamel paint Grade-I VOC (Volatile Organic Compound) content less than 50
grams/litre of approved shade including cost and conveyance of all materials to site cost of primer coat and
all labour charges etc. complete including applying sand paper on lappam coats for neat finish including
sales & other taxes on cost of all materials etc., and overheads & contractors profit complete in all floors
(APSS No.1200, 1207 & 1211).

(BLD-CSTN-12-6 & 12-12-195)

Cost of Putty for wood work 1 Kg 158.00 1 Kg 158.00
Primer Coat
Cost of Wood Primer 0.70 Ltr 158.00 1 Ltr 110.60
1st Class Painter 0.21 Nos. 480.00 1 Each 100.80
2nd Class Painter 0.49 Nos. 375.00 1 Each 183.75
2 coats of Enamel painting
Cost of Synthetic Enamel Paint 1.20 Ltr 276.00 1 Ltr 331.20
1st Class Painter 0.36 Nos. 480.00 1 Each 172.80
2nd Class Painter 0.84 Nos. 375.00 1 Each 315.00
Add for MA @ 25% 0.25 772.35 193.09
Sundries including brushes , ladders etc.,
@ 1% 0.01 1565.24 15.65
1580.89
Overheads&Contractors Profit @13.615% 0.13615 1580.89 215.24
Rate per 10 sqm 1796.13
Rate per 1 sqm 179.61
Say 180

78 Painting to old wood work and flush shutters with two coats of synthetic enamel paint Grade-II VOC
(Volatile Organic Compound) content less than 50 grams/litre of approved brand and shade including cost
and conveyance of all materials to site and all labour charges etc. complete, sales & other taxes on cost of
all materials etc.and overheads & contractors profit complete in all floors (APSS No.1200, 1207 & 1211) .

(BLD-CSTN-12-12-196)
Cost of Synthetic Enamel Paint 1.10 Ltr 276.00 1 Ltr 303.60
1st Class Painter 0.36 Nos. 480.00 1 Each 172.80
2nd Class Painter 0.84 Nos. 375.00 1 Each 315.00
Add for MA @ 25% 0.25 487.80 121.95
Sundries including brushes , ladders etc.,
@ 1% 0.01 913.35 9.13
922.48
Overheads&Contractors Profit @13.615% 0.13615 922.48 125.60
Rate per 10 sqm 1048.08
Rate per 1 sqm 104.81
Say 105

79 Painting primer coat on new wood work using red oxide Iron primer paint grade - 1 of approved
brand including cost and conveyance of all materials to site , all labour charges etc., and overheads &
contractors profit complete in all floors.(APSS No. 1201, 1212 & 1207).
(BLD-CSTN-12-7)
Unit : 10 sqm
 CIVIL DATA : Page-66

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
A.MATERIALS :
Red oxide primer 0.70 Ltr 142.00 1 Ltr 99.40
B.LABOUR :
1st Class Painter 0.21 Nos. 480.00 1 Each 100.80
2nd Class Painter 0.49 Nos. 375.00 1 Each 183.75
Add for MA @ 25% 0.25 284.55 71.14
Sundries including brushes , ladders etc.,
@ 1% 0.01 455.09 4.55
459.64
Overheads&Contractors Profit @13.615% 0.13615 459.64 62.58
Rate per 10 sqm 522.22
Rate per 1 sqm 52.22
Say 52

80 Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content
less than 50 grams/litre to new iron work including cost and conveyance of all materials to site, sales &
other taxes, incidental, operational and all labour charges etc., and overheads & contractors profit
complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).
(BLD-CSTN-12-12-197)
Unit : 10 sqm
A.MATERIALS :
Cost of Synthetic Enamel Paint 1.10 Ltr 276.00 1 Ltr 303.60
B.LABOUR :
1st Class Painter 0.33 Nos. 480.00 1 Each 158.40
2nd Class Painter 0.77 Nos. 375.00 1 Each 288.75
Add for MA @ 25% 0.25 447.15 111.79
Sundries including brushes , ladders etc.,
@ 1% 0.01 862.54 8.63
871.16
Overheads&Contractors Profit @13.615% 0.13615 871.16 118.61
Rate per 10 sqm 989.77
Rate per 1 sqm 98.98
Say 99

81 Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content
less than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance
of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., and
overheads & contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).
(BLD-CSTN-12-7 & 12-12-197)
Unit : 10 sqm
A.MATERIALS :
Red oxide primer 0.70 Ltr 142.00 1 Ltr 99.40
Cost of Synthetic Enamel Paint 1.10 Ltr 276.00 1 Ltr 303.60
B.LABOUR :
for primer coat
1st Class Painter 0.21 Nos. 480.00 1 Each 100.80
2nd Class Painter 0.49 Nos. 375.00 1 Each 183.75
for enamel painting
1st Class Painter 0.33 Nos. 480.00 1 Each 158.40
2nd Class Painter 0.77 Nos. 375.00 1 Each 288.75
Add for MA @ 25% 0.25 731.70 182.93
Sundries including brushes , ladders etc.,
@ 1% 0.01 1317.63 13.18
1330.80
 CIVIL DATA : Page-67

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Overheads&Contractors Profit @13.615% 0.13615 1330.80 181.19
Rate per 10 sqm 1511.99
Rate per 1 sqm 151.20
Say 151

82 Painting two coats with synthetic enamel paint Gr-I having VOC (Volatile Organic Compound) content
less than 50 grams/litre to old iron work including cost and conveyance of all materials to site, sales &
other taxes, incidental, operational and all labour charges and overheads & contractors profit etc.,
complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).
(BLD-CSTN-12-12-198)
Unit : 10 sqm
A.MATERIALS :
Cost of Synthetic Enamel Paint 0.90 Ltr 276.00 1 Ltr 248.40
B.LABOUR :
1st Class Painter 0.33 Nos. 480.00 1 Each 158.40
2nd Class Painter 0.77 Nos. 375.00 1 Each 288.75
Add for MA @ 25% 0.25 447.15 111.79
Sundries including brushes , ladders etc.,
@ 1% 0.01 807.34 8.07
815.41
Overheads&Contractors Profit @13.615% 0.13615 815.41 111.02
Rate per 10 sqm 926.43
Rate per 1 sqm 92.64
Say 93

83 Polishing two coats to teak wood doors using French spirit polish of approved brand for new wood
work to teak wood frame and shutters including sand papering to smooth surfaces etc. including cost and
conveyance of all materials to site, all labour charges etc., complete for finished item of work in all floors.

(BLD-CSTN-12-15)
A.Materials
French polish 0.228 Ltrs 207.00 1 Ltrs 47.20
cost of spirit 1.63 Ltrs 111.00 1 Ltrs 180.93
B.Labour
1st Class Painter 0.96 Nos. 480.00 1 Nos. 460.80
2nd Class Painter 2.24 Nos. 375.00 1 Nos. 840.00
Add for MA @ 25% 0.25 1300.80 325.20
Sundries for terpentaine, sand paper,
putty, wood filler, white woolen cloth,
linseed oil, cotton etc., @ 1% 0.01 1854.13 18.54
1872.67
Overheads&Contractors Profit @13.615% 0.13615 1872.67 254.96
Rate per 10 Sqm 2127.63
Rate per 1 Sqm 212.76
Say 213

84 Supply & applying Melamine Polish Glossy/ Matt finish to the wood works duly cleaning the surface
and applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper,
clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air
dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24
hrs, Sand with 320 No emery paper, applying one coat of approved spraying thinner (for spraying)/
applying one coat of approved brushing thinner or general purpose thinner (for brushing) and apply (either
with spray or brush) two coats of approved brand melamine including cost & labour charges, emery
papers, cost of thinner & melamine polish, over heads and contractors profit etc., complete for finished item
of work
 CIVIL DATA : Page-68

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
(As per Amendment in SoR 2011-12)
Unit : 1 sqm
A.Materials
Melamine polish 0.065 Ltrs 349.00 1 Ltrs 22.69
Thinner for Poly Uretene polish 0.033 Ltrs 146.00 1 Ltrs 4.82
B.Labour
1st Class Painter 0.24 Nos. 480.00 1 Nos. 115.20
2nd Class Painter 0.56 Nos. 375.00 1 Nos. 210.00
Helper 0.80 Nos. 320.00 1 Nos. 256.00
Add for MA @ 25% 0.25 581.20 145.30
Sundries for spraying machine etc., @ 1% 0.01 754.00 7.54
761.54
Overheads&Contractors Profit @13.615% 0.13615 761.54 103.68
Rate per 1 Sqm 865.23
Say 865

85 Supply & applying Poly-Urethane Water Proof Polish Glossy/ Matt finish to the wood works duly
cleaning the surface and applying emery paper, Sand the wood with 180 No., emery paper and then with
320 No., emery paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty
knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, applying two component
wood sealer, after the surface preparation applying one coat of approved spraying PU thinner (for
spraying) / applying one coat of approved brushing PU thinner or general purpose thinner (for brushing)
and apply one coat of PU by brush or spray, air-dry overnight, Sand again with 180 No. emery paper and
removing dust, applying second coat of PU, air drying for 4 - 6 Hrs, Sand with 320 No emery paper, and
applying (either with spray or brush) two coats of approved brand PU including cost & labour charges,
emery papers, cost of thinner & Poly-Urethane Water Proof Polish, over heads and contracors profit etc.,
complete for finished item of work

(As per Amendment in SoR 2011-12)

Unit : 1 sqm
A.Materials
Poly-Urethene polish Interior grade 0.065 Ltrs 710.00 1 Ltrs 46.15
Thinner for Poly Uretene polish 0.033 Ltrs 146.00 1 Ltrs 4.82
B.Labour
1st Class Painter 0.24 Nos. 480.00 1 Nos. 115.20
2nd Class Painter 0.56 Nos. 375.00 1 Nos. 210.00
Helper 0.80 Nos. 320.00 1 Nos. 256.00
Add for MA @ 25% 0.25 581.20 145.30
Sundries for spraying machine etc., @ 1% 0.01 777.47 7.77
785.24
Overheads&Contractors Profit @13.615% 0.13615 785.24 106.91
Rate per 1 Sqm 892.15
Say 892

86 Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked
together through their entire length and jointed together at the ends by end-locks, mounted on specially
designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels,
stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations
including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks,
ball bearings, all accessories etc., overheads & contractors profit complete for finished item of work as per
special spn: 1108
Rate as per SSR 1.00 sqm 2861.00 1 sqm 2861.00
Overheads&Contractors Profit @13.615% 0.13615 2861.00 389.53
3250.53
Rate per 1 sqm Say 3251
 CIVIL DATA : Page-69

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
87 Supplying & fixing collapsible steel shutters with vertical, double channel of 20 x10x2 mm of 100 mm
centre ,Bracers with flat iron 40x40x6 mm with 38 mm dia steel pulleys, the top, bottom and side vertical
frames of the collapsible gate with 65x65mmx8mm MS Angle and middle guide rail at site height with
65mmx8mm MS flat for the pulleys to guide and fixed with necessary hold fasts, bolts, nuts, rivets, locking
arrangements, stoppers, handles, all accessories all fixtures and painted with one coat of approved steel
primer etc., overheads & contractors profit complete for finished item of work as per special spn 1105

Rate as per SSR 1.00 sqm 2503.00 1 sqm 2503.00

Overheads&Contractors Profit @13.615% 0.14 2503.00 340.78
Rate per 1 sqm 2843.78
Say 2844

88 Providing Expansion joint treatment with poly sulphide compound of approved make of finished size
25 x 12mm including making of 25mm x 12mm groove and primer coat over finished groove with finishing
of edges true to straight line and level over the finished surface of expansion joint including cost and
conveyance of all materials to site, all incidental, operational, labour charges ,.overheads & contractors
profit etc., complete for finished item of work as per approved drawing (for all floors on top of slab i.e in the
flooring and for internal vertical joints of grooves in dadooing surface)
As per market rate 1.00 RM 435.00 1 RM 435.00
Rate per 1 RM Say 435

89 Providing and fixing of Expansion joint filler board for buildings, columns, beams and slabs 25 mm
thick including cost and conveyance of all materials to site, all incidental, operational, labour charges
etc.overheads & contractors profit complete for finished item of work as per approved drawing for all floors

Rate as per SSR 1.00 Sqm 403.00 1 Sqm 403.00

Overheads&Contractors Profit @13.615% 0.13615 403.00 54.87
Rate per 1 sqm 457.87
Say 458

90 Providing and fixing of 24 gauge alluminium sheet over expansion joint groove of width 15cm fixed to
walls / columns at one edge and resting over the other block walls/columns concealing expansion joint with
slotted holes for free edge of aluminium sheet to facilitate free movement of aluminium sheet over the
finished surface of expansion joint and wall face using sheet metal screws with nylon receiver complete
including cost and conveyance of all materials to site, all incidental, operational, labour charges ,
overheads & contractors profit etc., complete for finished item of work as per approved drawing (for all
floors for vertical joints and bottom of slab)

Cost of aluminium sheet 24 gauge 1.00 Sqm 302.00 1 Sqm 302.00

Add for labour charges including cost of
nails, making holes to wall and in
aluminium sheet etc. 6.60 RM 25.00 1 RM 165.00
Rate per 1 sqm 467.00
Rate per 1 RM 71.00
Overheads&Contractors Profit @13.615% 0.13615 71.00 9.67
80.67
Say 81

91 Supplying and fixing aluminium composite cladding 4mm thick of approved make with skin material
0.25 mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with
extruded aluminium basis frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as
approved, using suitable bolts on structural steel work including necessary accessories complete in all
respects including all scaffolding and labour charges , overheads & contractors profit complete for finished
item of work but excluding cost of structural steel fabrication if any.

Rate as per SSR 1.00 sqm 2820.00 1 sqm 2820.00

 CIVIL DATA : Page-70

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Overheads&Contractors Profit @13.615% 0.13615 2820.00 383.94
Rate per 1 sqm 3203.94
Say 3204

92 Supplying and fixing aluminium composite cladding 4mm thick of approved make with skin material
0.50 mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with
extruded aluminium basis frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as
approved, using suitable bolts on structural steel work including necessary accessories complete in all
respects including all scaffolding and labour charges , overheads & contractors profit etc., complete for
finished item of work but excluding cost of structural steel fabrication if any.

Rate as per SSR 1.00 sqm 3163.00 1 sqm 3163.00

Overheads&Contractors Profit @13.615% 0.13615 3163.00 430.64
Rate per 1 sqm 3593.64
Say 3594

93 Providing and Fixing Structural Glazing fabricated from Roll formed sections made of Pre-painted
Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120
Gm/Sqm) with total coated thickness of 0.72mm. The glass holding section made of 304 grade stainless
steel of 0.6mm thick as per the design requirement & calculations as given in IS: 875. Primer coat with
epoxy primer of 5 – 7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back
coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns
thick. The vertical section should be of 50mm x100mm x 0.72mm, 33mm x 58mm x 0.72mm for frame
horizontal section, stiffener section should be 48mm x 98mm x 1mm, cover profiles sections should be of
20mm x 58mm x 0.58mm, Glass holding section should be of 37mm x 37mm & 37mm x 18mm. Including
5mm thick Ocean Blue reflective glass. Brackets made of CRCA powder coated/Electroplated should be
used to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site
requirement.

Gasket made of Ethyl Propylene Diamine Monomer. Natural cure, with Good U.V. Resistance Silicon to be
used. Wall fixing of sections to concrete/masonry wall should be with self-expanding cap & screws. The
rate is inclusive of cost and conveyance of all materials to site, all labour charges, incidental charges, cost
of all consumables etc. and scaffolding charges, form work , overheads & contractors profit etc., complete
for finished item of work in all floors.

Rate as per SSR 1.00 sqm 7288.00 1 sqm 7288.00

Overheads&Contractors Profit @13.615% 0.13615 7288.00 992.26
Rate per 1 sqm 8280.26
Say 8280

94 Providing and Fixing Top Hung shutters in Structural Glazing fabricated from Roll formed sections
made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS
277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72mm. The glass holding section made of
304 grade stainless steel of 0.6mm thick. Galvanized steel sections are to be used as stiffeners inside the
colour coated steel/powder coated sections as per the design requirement. Design calculations are made
to suit wind pressures as given in IS 875. Primer coat with epoxy primer of 5-7 microns thick and back
coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns
thick. The outer frame should be of 20mm x 58mm x 0.6mm, Shutter section should be of 58mm x 33mm
x 0.72 mm, stiffener section should be 56mm x 31mm x 1mm. EARL Bihari Hinges – 2 Nos for each
shutter and Aluminium Stays – 2 Nos. for each shutter, Aluminium Handle – 1 no. for each shutter. The
rate is inclusive of cost and conveyance of all materials to site, all labour charges,

incidental charges, cost of all consumables etc. and scaffolding charges, form work, overheads &
contractor profit etc. complete for finished item of work in all floors.
Rate as per SSR 1.00 sqm 5891.00 1 sqm 5891.00
Overheads&Contractors Profit @13.615% 0.13615 5891.00 802.06
Rate per 1 sqm 6693.06
Say 6693
 CIVIL DATA : Page-71

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)

95 Supply and fixing of curtain Glazing made of pre painted steel (base steel as per IS 513 of 0.6 mm
thick D quality, galvanized as per IS 277 with Zinc of 120 GSM) Primer coated with epoxy primer of 5-7
microns thick, finish painted with a polyester paint of 12- 16 microns thick and back coated with 5-7
microns thick alkyd backer. Section for outer frame should be 46 x 52 mm, section for mullion should be 46
x 70 mm and section for beading should be 18 x 25 mm. The Glazing should be paneled with 5 mm thick
plain float Glass with Ethyl Propylene diameine Monomer (EPDM) Gaskets. The sections are to be cut to
length, mitre joined with corner bracket. Centre mullions are to be fixed suing mullion cap. Handle made of
high grade Aluminium powder coated and nylon receiver. Gaskets made of Ethyl propylene Diamine
Monomer (EPDM) Corner brackets made of CRCA with zinc phosphating. Mullion caps made of Glass
filled nylon. The above frames should be fixed to the concrete / masonry wall be means of self expanding
screws,overheads & contractor profit etc., complete for finished item in all floors.

a) Fixed Glazing 2'-0" x 2'-0" (609.6x609.6mm) and 2'-0" x 3'-0" (609.6x914.4mm) grid outer frames
section size of 46 x 52 mm
Rate as per SSR 1.00 sqm 6013.00 1 sqm 6013.00
Overheads&Contractors Profit @13.615% 0.13615 6013.00 818.67
Rate per 1 sqm 6831.67
Say 6832

b) Fixed Glazing 3'-0" x 3'-0" (914.4x914.4mm), 3'-0" x 4'-0" (914.4x1219.2mm) grid outer frames
section size of 46 x 52 mm
Rate as per SSR 1.00 sqm 4724.00 1 sqm 4724.00
Overheads&Contractors Profit @13.615% 0.14 4724.00 643.17
Rate per 1 sqm 5367.17
Say 5367

96 Providing and fixing in true horizontal level 12 mm - Mineral Fiber sheet 600 x 600 (Square / Tegular)
edge tiles with a Humidity Resistance of 90% RH,Average NRC 0.50, Light Reflectance >80%, Thermal
Conductivity λ= 0.052 to 0.057 w/mk, Fire Performance Class 0/Class 1 using hot dipped Galvanized Steel
section exposed surface with pre-coated capping, main Tee of size 24 x 32 mm at every 1200 mm c/c
maximum and rotary stitched cross tee of size 24 x 27 mm at every 600 mm c/c and sub-cross tee of size
24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x 19 mm fixed to periphery of the wall and the
above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI
Wire including cost and conveyance of all materials and labour charges such as cutting , fixing of standing
of frame work exposing roof making, overheads & contractor profit etc., complete for finished item of work
in all floor in all floors.

(BLD-CSTN-10-33 & vide Page No. 391 of SoR 2011-12)

Unit 1 Sqm
A) Material requirement
12mm Mineral Fiber sheet 600 x 600 1.00 sqm 456.00 1 sqm 456.00
Hotdipped GI Angle - Precoated - Grid -
19mmx19mmX0.7mm 0.40 RM 40.00 1 RM 16.00
Polyster painted GI - T section - 1200mm -
24x32mm and 24x25mm (sub-cross Tee)
1.60 RM 47.50 1 RM 76.00
Polyster painted GI-T Section - 300mm -
24mm x 27mm 1.60 RM 46.00 1 RM 73.60
GI Rod - prestraightened - 2.0mm dia
-Connecting Rod 1.28 RM 10.00 1 RM 12.80
6mm Nylon Rawl Plug 1.28 Nos. 2.00 1 No. 2.56
B) Labour charges
1st Class Carpenter 0.12 Nos. 420.00 1 No. 50.40
2nd Class Carpenter 0.12 Nos. 375.00 1 No. 45.00
 CIVIL DATA : Page-72

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
1st Class Painter 0.024 Nos. 480.00 1 No. 11.52
2nd Class Painter 0.024 Nos. 375.00 1 No. 9.00
Power Saw cutter - Hand Operated -
Operator 0.012 Nos. 420.00 1 No. 5.04
Power Drill - Hand Operated - Operator 0.012 Nos. 420.00 1 No. 5.04
Unskilled Mazdoor 0.072 Nos. 320.00 1 No. 23.04
Add for MA @ 25% 0.25 149.04 37.26
C) Machinery
Power Saw cutter - Hand Operated - Hire
Charges 0.32 Hours 125.00 1 No. 40.00
Power Drill - Hand Operated - Hire 0.32 Hours 116.00 1 No. 37.12
Charges 900.38
Scaffolding charges 1% 0.01 900.38 9.00
Basic Cost per 1 sqm 909.38
Overheads&Contractors Profit @13.615% 0.13615 909.38 123.81
Rate per 1 sqm 1033.20
Say 1033

97 Providing and fixing in true horizontal level 13 mm - Mineral Fiber sheet 595 x 595 (Square / Tegular)
Fissura fine model edge tiles with a Humidity Resistance of 90% RH,Average NRC 0.50, Light Reflectance
>80%, Thermal Conductivity λ= 0.052 to 0.057 w/mk, Fire Performance Class 0/Class 1 using hot dipped
Galvanized Steel section exposed surface with pre-coated capping, main Tee of size 24 x 32 mm at every
1200 mm c/c maximum and rotary stitched cross tee of size 24 x 27 mm at every 600 mm c/c and sub-
cross tee of size 24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x 19 mm fixed to periphery of
the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-
straightened GI Wire including cost and conveyance of all materials and labour charges such as cutting ,
fixing of standing of frame work exposing roof making, overheads & contractor profit etc., complete for
finished item of work in all floor in all floors.

(BLD-CSTN-10-33 & vide Page No. 391 of SoR 2011-12)

Unit 1 Sqm
A) Material requirement
13mm Mineral Fiber sheet 600 x 600 1.00 sqm 368.00 1 sqm 368.00
Hotdipped GI Angle - Precoated - Grid -
19mmx19mmX0.7mm 0.40 RM 40.00 1 RM 16.00
Polyster painted GI - T section - 1200mm -
24x32mm and 24x25mm (sub-cross Tee)
1.60 RM 47.50 1 RM 76.00
Polyster painted GI-T Section - 300mm -
24mm x 27mm 1.60 RM 46.00 1 RM 73.60
GI Rod - prestraightened - 2.0mm dia
-Connecting Rod 1.28 RM 10.00 1 RM 12.80
6mm Nylon Rawl Plug 1.28 Nos. 2.00 1 No. 2.56
B) Labour charges
1st Class Carpenter 0.12 Nos. 420.00 1 No. 50.40
2nd Class Carpenter 0.12 Nos. 375.00 1 No. 45.00
1st Class Painter 0.024 Nos. 480.00 1 No. 11.52
2nd Class Painter 0.024 Nos. 375.00 1 No. 9.00
Power Saw cutter - Hand Operated -
Operator 0.012 Nos. 420.00 1 No. 5.04
Power Drill - Hand Operated - Operator 0.012 Nos. 420.00 1 No. 5.04
Unskilled Mazdoor 0.072 Nos. 320.00 1 No. 23.04
Add for MA @ 25% 0.25 149.04 37.26
C) Machinery
 CIVIL DATA : Page-73

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Power Saw cutter - Hand Operated - Hire
Charges 0.32 Hours 125.00 1 No. 40.00
Power Drill - Hand Operated - Hire 0.32 Hours 116.00 1 No. 37.12
Charges 812.38
Scaffolding charges 1% 0.01 812.38 8.12
Basic Cost per 1 sqm 820.50
Overheads&Contractors Profit @13.615% 0.13615 820.50 111.71
Rate per 1 sqm 932.22
Say 932

98 Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1) using
12.5 mm thick Gyp Board conforming to IS 2095 - 1993 fixing to Gyp steel GI perimeter channels of size 20
mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/
partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x
15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI
Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm
x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c
and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and
finishing using joint compound and paper tape to have a flush look including filling the tapered & square
edges with jointing compound, two coats of drywall topcoa including overheads and contractor profit etc.,
complete for finished item of work

(BLD-CSTN-10-31 & vide Page No. 389 of SoR 2011-12)

Unit - 1 Sqm
A) Material requirement as per India
Gypsum
12.5mm Gypboard
1219mm x 1829mm size Boards 1.03 sqm 248.00 1 sqm 255.44
GI Ceiling Angle - 25mm x 10mm x 0.5mm 0.64 RM 74.00 1 RM 47.36
GI Ceiling section - 51.5mm x 26mm x
10.5mm x 0.55mm thick 0.84 RM 85.00 1 RM 71.40
Intermediate channel - 45mm x 15mm x
15mm x 0.9mm 0.84 RM 84.00 1 RM 70.56
Perimeter channel - 20mm x 27mm x
30mm (web) of 0.55mm thick 0.40 RM 74.00 1 RM 29.60
Connecting Clips 1.84 Nos. 2.00 1 No. 3.68
Rawl Plug 0.64 Nos. 2.00 1 No. 1.28
Soffit Cleats 0.64 Nos. 2.00 1 No. 1.28
Drywall screws - 25mm 18.00 Nos. 2.00 1 No. 36.00
Jointing Compound 0.55 Kgs. 29.00 1 Kg. 15.95
Jointing Paper tape 1.46 RM 5.00 1 RM 7.30
Drywall top coat 0.15 Ltrs 142.00 1 Ltr 21.30
B) Labour Charges
1st Class Carpenter 0.12 Nos. 420.00 1 No. 50.40
2nd Class Carpenter 0.12 Nos. 375.00 1 No. 45.00
1st Class Painter 0.024 Nos. 480.00 1 No. 11.52
2nd Class Painter 0.024 Nos. 375.00 1 No. 9.00
Power Saw cutter - Hand Operated - 0.012 Nos. 420.00 1 No. 5.04
Operator
Power Drill - Hand Operated - Operator 0.024 Nos. 420.00 1 No. 10.08
Unskilled Mazdoor 0.072 Nos. 320.00 1 No. 23.04
Add for MA @ 25% 0.25 154.08 38.52
C) Machinery
Power Saw cutter - Hand Operated - Hire
Charges 0.32 Hours 125.00 1 Hour 40.00
Power Drill - Hand Operated - Hire 0.64 Hours 116.00 1 Hour 74.24
Charges 867.99
 CIVIL DATA : Page-74

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
Scaffolding charges 1% 0.01 867.99 8.68
Rate per 1 sqm 876.67
Overheads&Contractors Profit @13.615% 0.13615 876.67 119.36
996.03
Say 996

99 Supplying and fixing Gyp board Fine line Grid false ceiling (GS-FLC-4.6)using 12.5mm thick Gyp
Board sheet tiles of size 595mm x 595mm conforming to IS 2095 - 1992 fixing to Gyp steel precoated GI
wall angle of size 25mm x 25mm x 0.70mm thick along the perimeter of ceiling screw fixed to brick work /
partition at 610mm center to center and suspending the frame work using precoated GI Tee section (24mm
x 38mm x 0.7mm) from soffit at 1220mm center to center fixed with GI Soffit Cleat, rawl plugs and steel
expansion fasteners & connecting clip to the GI Tee section with 4mm dia GI rod with galvanised spring
steel level clip of PVC unversal holding clips system at 1200mm center to center and fixing the 12.5mm
Gypboard sheet tiles of size 595mm x 595mm and finishing two coats of drywall top coat, overheads and
contractor profit complete for finished item of work in all floors.

(BLD-CSTN-10-32 & vide Page No. 390 of SoR 2011-12)

Unit - 1 Sqm
A) Material requirement as per India Gypsum
12.5mm Gypboard Tiles
595mm x 595mm 1.00 sqm 281.00 1 sqm 281.00
GI Angle - Precoated - 25mm x 25mm
x0.7mm 0.40 RM 41.00 1 RM 16.40
GI pre coated - T section - 3600mm long -
24mm x 38mm x 0.7mm thick 3.20 RM 54.00 1 RM 172.80
GI Rod - 4mm dia - Connecting Rod 1.28 RM 12.00 1 RM 15.36
Rawl Plug 1.28 Nos. 2.00 1 No. 2.56
Soffit Cleats 1.28 Nos. 2.00 1 No. 2.56
Universal Holding Clips 5.36 Nos. 3.00 1 No. 16.08
Drywall Top coat 0.15 Ltrs 142.00 1 Ltr 21.30
B) Labour Charges
1st Class Carpenter 0.12 Nos. 420.00 1 No. 50.40
2nd Class Carpenter 0.12 Nos. 375.00 1 No. 45.00
1st Class Painter 0.02 Nos. 480.00 1 No. 11.52
2nd Class Painter 0.024 Nos. 375.00 1 No. 9.00
Power Saw cutter - Hand Operated - 0.012 Nos. 420.00 1 No. 5.04
Operator
Power Drill - Hand Operated - Operator 0.012 Nos. 420.00 1 No. 5.04
Unskilled Mazdoor 0.072 Nos. 320.00 1 No. 23.04
Add for MA @ 25% 0.25 149.04 37.26
C) Machinery
Power Saw cutter - Hand Operated - Hire
Charges 0.32 Hours 125.00 1 Hour 40.00
Power Drill - Hand Operated - Hire 0.32 Hours 116.00 1 Hour 37.12
Charges 791.48
Scaffolding charges @ 1% 0.01 791.48 7.91
Basic Cost per 1 Sqm 799.39
Overheads&Contractors Profit @13.615% 0.13615 799.39 108.84
Rate per 1 sqm 908.23
Say 908
 CIVIL DATA : Page-75

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
100 Providing and fixing Thermocole False ceiling in true horizontal level 600mm x 600mm using 12mm
thick Thermocole sheet, anodized Aluminium Tee sections of size 24.50mm x 24.0mm x 2.4mm in grid with
cross tee of size 24mm x 24.5mm at every 600mm center to center and anodised aluminium wall angle of
size 24mm x 24mm fixed to periphery of the wall and the above grid is suspended at every 1200mm center
to center in both directions using 2.0mm thick GI wire for finished of size 600mm x 600mm including cost
and conveyance of all materials and labour charges such as cutting , fixing of standing of frame work
exposing roof complete for finished item of work in all floors. (The rate is inclusive of overheads &
contractor profit).
(BLD-CSTN-10-34 & vide Page No. 392 of SoR 2011-12)
Unit 1 Sqm
A) Material requirement
12mm Thermocole sheet 1.00 sqm 26.00 1 sqm 26.00
Aluminium angle - 24mmx 24mm 0.40 RM 26.00 1 RM 10.40
Anodised Aluminium T section - 24mm x 3.20 RM 34.00 1 RM 108.80
24.5mm
GI x 2.4mm
rod-prestraightened 2.0mm dia. - 1.28 Nos. 10.00 1 No. 12.80
Connecting
Rawl plugs rod 1.28 Nos. 2.00 1 No. 2.56
B) Labour charges
1st Class Carpenter 0.11 Nos. 420.00 1 No. 45.36
2nd Class Carpenter 0.11 Nos. 375.00 1 No. 40.50
Power Saw cutter - Hand Operated - 0.02 Nos. 420.00 1 No. 8.40
Operator
Power Drill - Hand Operated - Operator 0.04 Nos. 420.00 1 No. 16.80
Unskilled Mazdoor 0.20 Nos. 320.00 1 No. 64.00
Add for MA @ 25% 0.25 175.06 43.77
C) Machinery
Power Saw cutter - Hand Operated - Hire 0.16 Hours 125.00 1 No. 20.00
Charges
Power Drill - Hand Operated - Hire 0.32 Hours 116.00 1 No. 37.12
Charges 436.51
Scaffolding charges 1% 0.01 436.51 4.37
Basic Cost per 1 Sqm 440.87
Overheads&Contractors Profit @13.615% 0.13615 440.87 60.02
Rate per 1 sqm 500.89
Say 501

101 Supplying and fixing 50mm dia nominal bore Medium Grade properties & weight as per IS 1239 ISI
mark MS Tube for fixing of GI Sheet including cost and conveyance of all materials to work site and all
operational, incidental, labour charges , overheads & contractors profit for finished item of work.etc.,
complete for finished item of work in all floors for stair case head room roof.

Cost of MS Tube 5.10 Kgs 61.00 1 Kgs 311.10

Labour charges for fabrication 5.10 Kgs 24.00 1 Kgs 122.40
Labour charges for fixing 5.10 Kgs 4.00 Kgs 20.40
Add for MA @ 25% 0.25 69.36 17.34
Rate per 1 RM 471.24
Overheads&Contractors Profit @13.615% 0.13615 471.24 64.16
535.40
Say 535

102 Roofing with corrugated G.I sheets 0.80mm thick fixed with G.I ‘J’ bolts & nuts 8 mm dia with bitumen &
G.I limpet washers filled with white lead & including a coat of approved steel primer and two coats of
approved paint on over lapping of sheets complete (up to a pitch of 600) etc., complete, excluding the cost
of purlins, rafters, trusses including cost and conveyance of all materials , labour charges , overheads and
contractors profit etc., complete for finished item of work in all floors.
Unit : 10 sqm
A. MATERIALS:
G.I corrugated 0.80 mm thick sheets 103.09 Kgs 60.00 1 Kg 6185.40
 CIVIL DATA : Page-76

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
G.I scam bolts & nuts 2 x 27 (laps) x 17 = 47.91 Nos. 5.00 1 No. 239.55
884
G.I ‘J’ bolts 8 mm dia 2 x 5 x 27 sheets x 3 43.90 Nos. 10.00 1 No. 439.00
nos = 810
Limpet nos. (for
washers withscam
washers or srews,
& ‘J’ bolts) if
884 + 91.82 Nos. 1.00 1 No. 91.82
wooden
810 battens
washersused.
= 1694
Bitumen 91.82 Nos. 1.00 1 No. 91.82
Zinc cromate yellow paint 0.14 Ltrs 204.00 1 Ltr 28.56
Ready mixed paint 0.20 Ltrs 276.00 1 Ltr 55.20
B. LABOUR
For roofing
Carpenter II class 0.84 Nos. 375.00 1 No. 315.00
Man mazdoor (beldar) 0.91 Nos. 320.00 1 No. 291.20
For primer painting one coat
Painter 1st class 0.018 Nos. 480.00 1 No. 8.64
Painter 1st class 0.042 Nos. 375.00 1 No. 15.75
Mazdoor (coolie) 0.06 Nos. 320.00 1 No. 19.20
For two coats of painting to over laps
Painter 1st class 0.042 Nos. 480.00 1 No. 20.16
Painter 1st class 0.098 Nos. 375.00 1 No. 36.75
Mazdor (coolie) 0.14 Nos. 320.00 1 No. 44.80
Add for MA @ 25% 0.25 751.50 187.88
Rate per 10 sqm 8070.73
Rate per 1 sqm 807.07
Overheads&Contractors Profit @13.615% 0.13615 807.07 109.88
Rate per 1 sqm 916.96
say 917

103 Supplying and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm
thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular
Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet
Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours fixed with G.I ‘J’ bolts & nuts 8 mm
dia with bitumen & G.I limpet washers filled with white lead & including a coat of approved steel primer and
two coats of approved paint on over lapping of sheets complete (up to a pitch of 600) etc., complete,
excluding the cost of purlins, rafters, trusses including cost and conveyance of all materials , labour
charges , overheads and contractors profit etc., complete for finished item of work in all floors.

Unit : 10 sqm
A. MATERIALS:
Galvalume sheet 0.50mm thick 10.50 sqm 456.00 1 sqm 4788.00
G.I scam bolts & nuts 2 x 27 (laps) x 17 =
884 47.91 Nos. 5.00 1 No. 239.55
G.I ‘J’ bolts 8 mm dia 2 x 5 x 27 sheets x 3
nos = 810 nos. with washers or srews, if
wooden battens used. 43.90 Nos. 10.00 1 No. 439.00
Limpet washers (for scam & ‘J’ bolts) 91.82 Nos. 1.00 1 No. 91.82
Bitumen washers 91.82 Nos. 1.00 1 No. 91.82
B. LABOUR
For roofing
Carpenter II class 0.84 Nos. 375.00 1 No. 315.00
Man mazdoor (beldar) 0.91 Nos. 320.00 1 No. 291.20
Add for MA @ 25% 0.25 606.20 151.55
Rate per 10 sqm 6407.94
Rate per 1 sqm 640.79
Overheads&Contractors Profit @13.615% 0.13615 640.79 87.24
Rate per 1 sqm 728.04
say 728
 CIVIL DATA : Page-77

Sl. Per Amount

Description Quantity Rate (Rs.)
No. Unit (Rs.)
1 Supply & application of one coat water based cement primer of interior gradea I and two coats of Poly-
urethene paint (MRF) for internal walls of operation theatre over Wall putty of White Cement or Polymer or
Cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and
smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials,
applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty
knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface
preparationincluding cost and conveyance of all materials to site, sales & other taxes, incidental,
operational and all labour charges etc., and overheads & contractors profit complete for finished item of
work in all floors.
(BLD-CSTN-12-2& Amendment in SoR 2011-12)
Unit 10 Sqm.
A. Materials:-
Unit = 10 Sqm
wall putty 23.00 Kgs 875.00 20 Kg 1006.25
Painter 1st class 0.273 Nos. 480.00 1 Each 131.04
Painter 2nd class 0.637 Nos. 375.00 1 Each 238.88
Mazdoor 0.91 Nos. 320.00 1 Each 291.20
Cost of cement primer interior grade I 1.00 Kg 165.00 1 Kg 165.00
Painter 1st class 0.21 Nos. 480.00 1 Each 100.80
Painter 2nd class 0.49 Nos. 375.00 1 Each 183.75
B. Material
Poly-urethene paint 0.80 Ltrs 575.00 1 Ltrs 460.00
Painter 1st class 0.36 Nos. 480.00 1 Each 172.80
Painter 2nd class 0.84 Nos. 375.00 1 Each 315.00
Add for MA @ 25% 0.25 772.35 193.09
Sundries including brushes , ladders etc.,
@ 1% 0.01 1590.44 15.90
3273.71
Overheads&Contractors Profit @13.615% 3273.71
0.13615 445.72

Rate per 10 sqm 3719.42

Rate per 1 sqm 371.94
Say 372
 Joinery data 77

JOINERY DATA
COMMON SoR 2015-2016

a) Labour charges for wrought and put up (BLD-CSTN-13-1)

1st class carpenter 5.31 Nos. 420.00 1 Each 2230.20
2nd class carpenter 12.39 Nos. 375.00 1 Each 4646.25
Man Mazdoor 8.80 Nos. 320.00 1 Each 2816.00
Labour charges per 1 cum 9692.45

b) Labour charges for aluminium doors ( S.No.11 of Page No. 396 of SoR 2011-12 )
1st class carpenter 0.099 Nos. 420.00 Each 41.58
2nd class carpenter 0.198 Nos. 375.00 Each 74.25
Power Saw Cutter -Hand Operated -Operator 0.099 Nos. 420.00 Each 41.58
Power Drill -Hand Operated -Operator 0.099 Nos. 420.00 Each 41.58
Mazdoor(Unskilled) 0.297 Nos. 320.00 Each 95.04
Non-technical work inspector 0.099 Nos. 400.00 Each 39.60
Add for MA @ 25% 0.25 333.63 83.41
Machinery

Power Saw Cutter -Hand Operated -Hire charges 0.793 Hrs 125.00 1 Hour 99.13
Power Drill -Hand Operated -Hire charges 0.793 Hrs 116.00 1 Hour 91.99
608.15
Power charges for Motors 1% 0.01 608.15 6.08
Labour charges per 1 sqm 614.23

c) Labour charges for aluminium sliding windows ( S.No.10 of Page No. 395 of SoR 2011-12 )
1st class carpenter 0.096 Nos. 420.00 Each 40.32
2nd class carpenter 0.289 Nos. 375.00 Each 108.38
Power Saw Cutter -Hand Operated -Operator 0.096 Nos. 420.00 Each 40.32
Power Drill -Hand Operated -Operator 0.096 Nos. 420.00 Each 40.32
Mazdoor(Unskilled) 0.289 Nos. 320.00 Each 92.48
Non-technical work inspector 0.096 Nos. 400.00 Each 38.40
Add for MA @ 25% 0.25 360.22 90.05
C.Machinery

Power Saw Cutter -Hand Operated -Hire charges 0.771 Hrs 125.00 1 Hour 96.38
Power Drill -Hand Operated -Hire charges 0.771 Hrs 116.00 1 Hour 89.44
636.08
Power charges for Motors 1% 0.01 636.08 6.36
Labour charges per 1 sqm 642.44
 Joinery data 78

d) Labour charges for aluminium partitions partly glazed ( S.No.8 of Page No. 394 of SoR 2011-12 )
1st class carpenter 0.434 Nos. 420.00 Each 182.28
2nd class carpenter 0.434 Nos. 375.00 Each 162.75

Power Saw Cutter -Hand Operated -Operator 0.043 Nos. 420.00 Each 18.06
Power Drill -Hand Operated -Operator 0.058 Nos. 420.00 Each 24.36
Mazdoor(Unskilled) 0.145 Nos. 320.00 Each 46.40
Non-technical work inspector 0.072 Nos. 400.00 Each 28.80
Add for MA @ 25% 0.25 462.65 115.66
C.Machinery

Power Saw Cutter -Hand Operated -Hire charges 0.347 Hrs 125.00 1 Hour 43.38
Power Drill -Hand Operated -Hire charges 0.463 Hrs 116.00 1 Hour 53.71
675.40
Power charges for Motors 1% 0.01 675.40 6.75
Labour charges per 1 sqm 682.15

e) Labour charges for aluminium casement windows ( S.No.9 of Page No. 394 of SoR 2011-12 )
1st class carpenter 0.100 Nos. 420.00 Each 42.00
2nd class carpenter 0.300 Nos. 375.00 Each 112.50
Power Saw Cutter -Hand Operated -Operator 0.100 Nos. 420.00 Each 42.00
Power Drill -Hand Operated -Operator 0.100 Nos. 420.00 Each 42.00
Mazdoor(Unskilled) 0.300 Nos. 320.00 Each 96.00
Non-technical work inspector 0.100 Nos. 400.00 Each 40.00
Add for MA @ 25% 0.25 374.50 93.63
C.Machinery

Power Saw Cutter -Hand Operated -Hire charges 0.800 Hrs 125.00 1 Hour 100.00
Power Drill -Hand Operated -Hire charges 0.800 Hrs 116.00 1 Hour 92.80
660.93
Power charges for Motors 1% 0.01 660.93 6.61
Labour charges per 1 sqm 667.53
 Joinery data 79

1 Supply and fixing of two shutter main door cum fixed window as per approved drawing with best teak wood
frame of section 150mm x 100 mm with fixed fan light of 500mm at top and fixed panels of 600mm width at sides
fixed with 12mm thick Tinted - Bronze/Green glass using 12mm x 12mm teak wood beading and fixing ornamental
grill made of 25mm x 5mm MS flats as per the approved drawing in fan light portion and fixed panels and 1st class
teak wood top and middle rails & styles of section 120mm x 35mm, bottom rail of size 150mm x 35mm and 12mm
thick plain float glass for shutter with ornamental etching including cost and

conveyance to site of teak wood frame, shutters, glass including supply and fixing 6 nos MS Zhold fasts of size
300 mm x 40 mm x 5mm including cost of ISI marked brass fixtures of 8 Nos butt hinges(IS:205) 250mm long , 1
No. aldrop (IS:2681) 450mm long, 3 Nos tower bolts- 10mm (IS:204) of 200 mm long , 2 Nos 450 mm long fancy
handles, 2 Nos door stoppers including fixing the fixtures to door with required number of screws, bolt and nuts
including labour charges for fixing the frame in position, fixing the shutters to the frame, fixing glass in fan light
portion etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002
(The vertical frame of door shall be embedded in flooring for a depth of not less than 40 mm) (3000mmX2600mm)

Quantity analysis Size : 3.00m x 2.60m 7.80 sqm

2x3.00 + 2x2.60+2x2.10
= 15.40 RM x 0.15 x 0.10 0.2310 Cum
Best teak wood frame up to 2m long for outer
frame 3x0.50+4x0.60
= 3.90 RM x 0.15 x 0.10 0.0585 Cum
Shutter styles 2 x 2 x 2.10
= 8.40 RM x 0.12 x 0.035 0.0353 Cum
Top and middle rail 2 x 2 x 0.90
= 3.60 RM x 0.12 x 0.035 0.0151 Cum
Bottom rail 2 x 0.90
= 1.80 RM x 0.15 x 0.035 0.0095 Cum
0.1184 Cum

12 mm thick tinted glass 3.00x0.50+2x0.60x2.10 4.02 Sqm

12 mm thick plain float glass 2x0.90x2.10 3.78 Sqm
Teak wood beading
Fan light portion 2x2(0.60+0.50)+2x2(0.90+0.50) 10.00 RM
Side fixed panels 2x6(0.60+0.70) 15.60 RM
Shutter portion 2x2(0.90+2.10) 12.00 RM
37.60 RM

Cost analysis
Cost of best TW frame 2 m to 3m length 0.2310 Cum 146840.00 1 Cum 33920.04
Cost of best TW frame up to 2 m length 0.1184 Cum 137941.00 1 Cum 16332.21
Cost of 12mm thick tinted glass 4.02 Sqm 1546.00 1 Sqm 6214.92
Cost of 12mm thick plain float glass 3.78 Sqm 1177.00 1 Sqm 4449.06
Cost of teak wood beading 37.60 RM 24.00 1 RM 902.40
Cost of 250mm long brass butt hinges 8 Nos 500.00 Each 4000.00
Cost of 450mm long brass fancy handles 2 Nos 1635.00 Each 3270.00
Cost of 450mm long brass heavy duty aldrop 1 No 3522.00 Each 3522.00
Cost of 200mm long brass tower bolts 3 Nos 347.00 Each 1041.00
Cost of brass door stoppers 2 Nos 198.00 Each 396.00
Cost of Z hold fasts 6 Nos 25.00 Each 150.00
Cost of MS Ornamental Grill 4.02 Sqm 1637.08 1 Sqm 6581.06
Labour charges 0.3494 Cum 9692.45 1 Cum 3386.54
Add for MA @ 25% 0.25 3386.54 846.64
Labour charges for fixing glass 7.80 Sqm 260.00 1 Sqm 2028.00
Add for MA @ 25% 0.25 2028.00 507.00
Labour charges for glass designing work( Etching
work) 3.78 Sqm 868.00 1 Sqm 3281.04
Add for MA @ 25% 0.25 3281.04 820.26
Add for screws and nails 11.83
Rate for 7.80 Sqm 91660.00
Rate for 1 Sqm 11751.28
Overheads&Contractors Profit @13.615% 0.13615 11751.28 1599.94
13351.22
Say 13351
 Joinery data 80

2 Supply and fixing of ornamental grill made of 25mm x 5mm MS flats for fixing in fan light portion and side fixed
panels for door cum window as per the approved drawing including cutting the flat to required length, welding,
painting with red oxide single coat including cost and conveyance of all materials, labour charges etc., complete for
finished otem of work.

for grill of size 535mm x 435mm 0.2327 Sqm

MS flats: 4(0.535+0.435)+4x0.1+2x0.38 5.04 RM 1 Kg/Rm 5.04 Kgs
Cost of MS flats 5.04 Kgs 42075.25 1000 Kgs 212.06
Labour charges for fabrication 5.04 Kgs 24.00 1 Kg 120.96
labour charges for fixing in position 5.04 Kgs 4.00 1 Kg 20.16
Add for MA @ 25% 0.25 68.54 17.14
Painting with red oxide 0.2327 Sqm 458.64 10 Sqm 10.67
Rate per 0.2327 Sqm 380.99
Rate per 1 Sqm 1637.08

Painting with Red oxide

Cost of red oxide 0.70 Ltr 142.00 1 Ltr 99.40
Painter 1st class 0.21 Nos. 480.00 1 Each 100.80
Painter 2st class 0.49 Nos. 375.00 1 Each 183.75
Sundries including brushes , ladders etc., @ 1% 0.01 284.55 2.85
Add for MA @ 25% 0.25 287.40 71.85
458.64
 Joinery data 81

3 Supply and fixing of doors as per approved drawings with best teak wood frame of section 100mm x 65 mm with
fixed fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading
and 2 Nos. of 10mm MS Square bars and ISI marked flush door shutter of 35mm thick double shutters with bond
wood solid block board type core having cross bands and face veneers, hot pressed bonded with water proof phenol
formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with
internal lipping on all sides
including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 nos MS Z
hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked brass fixtures of 6 Nos butt hinges (IS:205)
150mm long , 1 No. aldrop (IS:2681) 300mm long, 2 Nos tower bolts- 10mm (IS:204) of 200 mm long at top, 1 No.
tower bolt- 10mm bolt (IS:204) 150mm long at bottom, 2 Nos. 150mm long fancy handles (IS:208) , 2 Nos door
stopper and 2 Nos rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts
including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion
etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 The
vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (2000mm x 2600mm)

(BLD-CSTN-13-16)
Size : 2.00m x 2.60 m 5.20 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 2.00 + 0.50
= 4.50 x 0.10 x 0.065 0.02925 cum
0.06318 cum

4 mm thick pin headed glass 2 x 1.00 x 0.50 1.00 sqm

Teak wood beading 2 x 2 (1.00+0.50) 6.00 RM
35 mm thick flush shutter 2 x 0.95 x 2.05 3.895 sqm
10 mm MS square bars 2 x 2.00 x 0.785 3.140 Kgs

Cost analysis
Cost of best TW frame 2 m to 3m length 0.03393 cum 146840.00 1cum 4982.28
Cost of best TW frame up to 2 m length 0.02925 cum 137941.00 1cum 4034.77
Cost of 4 mm thick pin headed glass 1.00 sqm 331.00 1sqm 331.00
Cost of TW beading 6.00 RM 24.00 1RM 144.00
Cost of 35 mm thick flush shutter 3.895 sqm 1488.00 1sqm 5795.76
Cost of MS Z hold fasts 6 Nos. 25.00 Each 150.00
Cost of brass tower bolt 200mm long 2 Nos. 347.00 Each 694.00
Cost of brass tower bolt 150mm long 1 No. 260.00 Each 260.00
Cost of brass Butt hinges 150mm long 6 Nos. 383.00 Each 2298.00
Cost of brass aldrop 300mm long 1 No. 1284.00 Each 1284.00
Cost of brass fancy handle 150mm long 2 Nos. 335.00 Each 670.00
Cost of brass door stopper 2 Nos. 198.00 Each 396.00
Cost of rubber bush 2 Nos. 25.00 Each 50.00
Cost of 10mm MS square bars 3.14 Kgs 42575.25 1000 Kgs 133.69
Labour charges for frame work 0.06318 cum 9692.45 1 cum 612.37
Add for MA @ 25% 0.25 612.37 153.09
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 3.895 sqm 348.00 1 sqm 1355.46
Add for MA @ 25% 0.25 1355.46 338.87
Labour charges for fixing glass 1.00 sqm 260.00 1 sqm 260.00
Add for MA @ 25% 0.25 260.00 65.00
Add for nails & screws etc. 6.71
Rate for 5.20 sqm 24015.00
Overheads&Contractors Profit @13.615% 0.13615 24015.00 3269.64
27284.64
Rate for 1 sqm 5247.05
Say 5247
 Joinery data 82

4 Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm
with fixed fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood
beading and 2 Nos. of 10mm MS Square bars and ISI marked flush door shutter of 30mm thick double shutters
with bond wood solid block board type core having cross bands and face veneers, hot pressed bonded with water
proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial
ply with internal lipping on all sides

including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z
hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 6 Nos. butt
hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts - 10mm (IS:204) of 200 mm
long at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. rubber bushes including fixing
the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in
position, fixing the shutter to the frame, fixing glass in fan light portion etc., including overheads & contractors profit
complete for finished item of work as per APSS 1001 & 1002 The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (1800mm x 2600mm)

(BLD-CSTN-13-16)
Size : 1.80m x 2.60m 4.68 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 1.80 + 0.50
= 4.10 x 0.10 x 0.065 0.02665 cum
0.06058 cum

4 mm thick pin headed glass 1.80 x 0.50 0.90 sqm

Teak wood beading 2 x 2 (0.90+0.50) 5.60 RM
30 mm thick flush shutter 2 x 0.85 x 2.05 3.485 sqm
10 mm MS square bars 2 x 1.80 x 0.785 2.826 Kgs
Cost analysis
Cost of medium TW frame 2 m to 3m length 0.03393 cum 88994.00 1 cum 3019.57
Cost of medium TW frame up to 2 m length 0.02665 cum 80094.00 1 cum 2134.51
Cost of 4 mm thick pin headed glass 0.90 sqm 331.00 1 sqm 297.90
Cost of TW beading 5.60 RM 24.00 1 rm 134.40
Cost of 30 mm thick flush shutter 3.485 sqm 1314.00 1 sqm 4579.29
Cost of MS Z hold fasts 6 Nos. 25.00 Each 150.00
Cost of MS poder coated tower bolt 200mm long 2 Nos. 56.00 Each 112.00
Cost of MS powder coated butt hinges 150mm
long 6 Nos. 44.00 Each 264.00
Cost of MS powder coated aldrop 300mm long 1 No. 181.00 Each 181.00
Cost of MS powder coated handle 150mm long 2 Nos. 50.00 Each 100.00
Cost of MS powder coated door stopper 2 Nos. 50.00 Each 100.00
Cost of rubber bush 2 Nos. 25.00 Each 50.00
Cost of 10mm MS square bars 2.826 Kgs 42575.25 1000 Kgs 120.32
Labour charges for frame work 0.06058 cum 9692.45 1 cum 587.17
Add for MA @ 25% 0.25 587.17 146.79
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 3.485 sqm 348.00 1 sqm 1212.78
Add for MA @ 25% 0.25 1212.78 303.20
Labour charges for fixing glass 0.90 sqm 260.00 1 sqm 234.00
Add for MA @ 25% 0.25 234.00 58.50
Add for nails & screws etc. 4.59
Rate for 4.68 sqm 13790.00
Overheads&Contractors Profit @13.615% 0.13615 13790.00 1877.51
15667.51
Rate for 1 sqm 3347.76
Say 3348

5 Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm
with split type fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak
Wood beading and 2 Nos. of 10mm MS Square bars and ISI marked flush door shutter of 30mm thick double
shutters with bond wood solid block board type core having cross bands and face veneers, hot pressed bonded
with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides
commercial ply with internal lipping on all sides,
 Joinery data 83

including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z
hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 6 Nos. butt
hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm
dia at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. rubber bushes including fixing the
fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in
position, fixing the shutter to the frame, fixing glass in fan light portion etc., including overheads & contractors profit
complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (1500mm x 2600mm)

(BLD-CSTN-13-16)
Size : 1.50m x 2.60m 3.90 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 1.50 + 0.50
= 3.50 x 0.10 x 0.065 0.02275 cum
0.05668 cum

4 mm thick pin headed glass 2 x 1.50 x 0.30 0.90 sqm

Teak wood beading 2 x 2 (1.50+2 x 0.30) 8.40 RM
30 mm thick flush shutter 2 x 0.70 x 2.05 2.87 sqm
10 mm MS square bars 2 x 1.50 x 0.785 2.355 Kgs

Cost analysis
Cost of medium TW frame 2 m to 3m length 0.03393 cum 88994.00 1 cum 3019.57
Cost of medium TW frame up to 2 m length 0.02275 cum 80094.00 1 cum 1822.14
Cost of 4 mm thick pin headed glass 0.90 sqm 331.00 1 sqm 297.90
Cost of TW beading 8.40 RM 24.00 1 rm 201.60
Cost of 30 mm thick flush shutter 2.87 sqm 1314.00 1 sqm 3771.18
Cost of MS Z hold fasts 6 Nos. 25.00 Each 150.00
Cost of MS poder coated tower bolt 200mm long 2 Nos. 56.00 Each 112.00
Cost of MS powder coated butt hinges 150mm
long 6 Nos. 44.00 Each 264.00
Cost of MS powder coated aldrop 300mm long 1 No. 181.00 Each 181.00
Cost of MS powder coated handle 150mm long 2 Nos. 50.00 Each 100.00
Cost of MS powder coated door stopper 2 Nos. 50.00 Each 100.00
Cost of rubber bush 2 Nos. 25.00 Each 50.00
Cost of 10mm MS square bars 2.355 Kgs 42575.25 1000 Kgs 100.26
Labour charges for frame work 0.05668 cum 9692.45 1 cum 549.37
Add for MA @ 25% 0.25 549.37 137.34
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 2.87 sqm 348.00 1 sqm 998.76
Add for MA @ 25% 0.25 998.76 249.69
Labour charges for fixing glass 0.90 sqm 260.00 1 sqm 234.00
Add for MA @ 25% 0.25 234.00 58.50
Add for nails & screws etc. 2.69
Rate for 3.90 sqm 12400.00
Overheads&Contractors Profit @13.615% 0.13615 12400.00 1688.26
14088.26
Rate for 1 sqm 3612.37
Say 3612

6 Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm
with split type fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak
Wood beading and 2 Nos. of 10mm MS Square bars and ISI marked flush door shutter of 30mm thick double
shutters with bond wood solid block board type core having cross bands and face veneers, hot pressed bonded
with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides
commercial ply with internal lipping on all sides,
 Joinery data 84

including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z
hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 6 Nos. butt
hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm
dia at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. rubber bushes including fixing the
fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in
position, fixing the shutter to the frame, fixing glass in fan light portion etc, including overheads & contractors profit
complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (1200mm x 2600mm)

(BLD-CSTN-13-16)
Size : 1.20m x 2.60m 3.12 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 1.20 + 0.50
= 2.90 x 0.10 x 0.065 0.01885 cum
0.05278 cum

4 mm thick pin headed glass 2 x 1.20 x 0.30 0.72 sqm

Teak wood beading 2 x 2 (1.20+2 x 0.30) 7.20 RM
30 mm thick flush shutter 2 x 0.55 x 2.05 2.255 sqm
10 mm MS square bars 2 x 1.20 x 0.785 1.884 Kgs

Cost analysis
Cost of medium TW frame 2 m to 3m length 0.03393 cum 88994.00 1 cum 3019.57
Cost of medium TW frame up to 2 m length 0.01885 cum 80094.00 1 cum 1509.77
Cost of 4 mm thick pin headed glass 0.72 sqm 331.00 1 sqm 238.32
Cost of TW beading 7.20 RM 24.00 1 rm 172.80
Cost of 30 mm thick flush shutter 2.255 sqm 1314.00 1 sqm 2963.07
Cost of MS Z hold fasts 6 Nos. 25.00 Each 150.00
Cost of MS poder coated tower bolt 200mm long 2 Nos. 56.00 Each 112.00
Cost of MS powder coated butt hinges 150mm
long 6 Nos. 44.00 Each 264.00
Cost of MS powder coated aldrop 300mm long 1 No. 181.00 Each 181.00
Cost of MS powder coated handle 150mm long 2 Nos. 50.00 Each 100.00
Cost of MS powder coated door stopper 2 Nos. 50.00 Each 100.00
Cost of rubber bush 2 Nos. 25.00 Each 50.00
Cost of 10mm MS square bars 1.884 Kgs 42575.25 1000 Kgs 80.21
Labour charges for frame work 0.0528 cum 9692.45 1 cum 511.57
Add for MA @ 25% 0.25 511.57 127.89
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 2.255 sqm 348.00 1 sqm 784.74
Add for MA @ 25% 0.25 784.74 196.19
Labour charges for fixing glass 0.72 sqm 260.00 1 sqm 187.20
Add for MA @ 25% 0.25 187.20 46.80
Add for nails & screws etc. 4.88
Rate for 3.12 sqm 10800.00
Overheads&Contractors Profit @13.615% 0.13615 10800.00 1470.42
12270.43
Rate for 1 sqm 3932.83
Say 3933

7 Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm
with split type fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak
Wood beading and 2 Nos. of 10mm MS Square bars and ISI marked flush door shutter of 30mm thick single
shutter with bond wood solid block board type core having cross bands and face veneers, hot pressed bonded with
water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides
commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush
shutter including supply and fixing
 Joinery data 85

6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 3
Nos. butt hinges (IS:205) 150mm long , 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x
10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 1 No. door stopper and 1 No. rubber bush including fixing
the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in
position, fixing the shutter to the frame, fixing glass in fan light portion etc, including overheads & contractors profit
complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (1000mm x 2600mm)

(BLD-CSTN-13-16)
Size : 1.00m x 2.60m 2.60 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 1.00
= 2.00 x 0.10 x 0.065 0.01300 cum
0.04693 cum

4 mm thick pin headed glass 2 x 1.00 x 0.30 0.60 sqm

Teak wood beading 2 x (1.00+2 x 0.30) 3.20 RM
30 mm thick flush shutter 2 x 0.90 x 2.05 1.845 sqm
10 mm MS square bars 2 x 1.00 x 0.785 1.570 Kgs

Cost analysis
Cost of medium TW frame 2 m to 3m length 0.03393 cum 88994.00 1 cum 3019.57
Cost of medium TW frame up to 2 m length 0.0130 cum 80094.00 1 cum 1041.22
Cost of 4 mm thick pin headed glass 0.60 sqm 331.00 1 sqm 198.60
Cost of TW beading [ 2x2 (1.00+2x0.30)] 3.20 RM 24.00 1 rm 76.80
Cost of 30 mm thick flush shutter 1.845 sqm 1314.00 1 sqm 2424.33
Cost of MS Z hold fasts 6 Nos. 25.00 Each 150.00
Cost of MS poder coated tower bolt 200mm long 1 No. 56.00 Each 56.00
Cost of MS powder coated butt hinges 150mm
long 3 Nos. 44.00 Each 132.00
Cost of MS powder coated aldrop 300mm long 1 No. 181.00 Each 181.00
Cost of MS powder coated handle 150mm long 2 Nos. 50.00 Each 100.00
Cost of MS powder coated door stopper 1 No. 50.00 Each 50.00
Cost of rubber bush 1 No. 25.00 Each 25.00
Cost of 10mm MS square bars 1.57 Kgs 42575.25 1000 Kgs 66.84
Labour charges for frame work 0.0469 cum 9692.45 1 cum 454.87
Add for MA @ 25% 0.25 454.87 113.72
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 1.845 sqm 348.00 1 sqm 642.06
Add for MA @ 25% 0.25 642.06 160.52
Labour charges for fixing glass 0.60 sqm 260.00 1 sqm 156.00
Add for MA @ 25% 0.25 156.00 39.00
Add for nails & screws etc. 2.48
Rate for 2.60 sqm 9090.00
Overheads&Contractors Profit @13.615% 0.13615 9090.00 1237.60
10327.60
Rate for 1 sqm 3972.16
Say 3972

8 Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm
with split type fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak
Wood beading and 2 Nos. of 10mm MS Square bars and ISI marked flush door shutter of 30mm thick single
shutter with bond wood solid block board type core having cross bands and face veneers, hot pressed bonded with
water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides
commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush
shutter including supply and fixing
 Joinery data 86

6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 3
Nos. butt hinges (IS:205) 150mm long , 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x
10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 1 No. door stopper and 1 No. rubber bush including fixing
the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in
position, fixing the shutter to the frame, fixing glass in fan light portion etc, including overheads & contractors profit
complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (900mm x 2600mm)

(BLD-CSTN-13-16)
Size : 0.90m x 2.60m 2.34 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.61
= 5.22 x 0.10 x 0.065 0.03393 cum
Outer frame - Horizontal 2 x 0.90
= 1.80 x 0.10 x 0.065 0.01170 cum
0.04563 cum
4 mm thick pin headed glass 2 x 0.90 x 0.30 0.54 sqm
Teak wood beading 2 x (0.90+2 x 0.30) 3.00 RM
30 mm thick flush shutter 2 x 0.80 x 2.05 1.64 sqm
10 mm MS square bars 2 x 0.90 x 0.785 1.413 Kgs

Cost analysis
Cost of medium TW frame 2 m to 3m length 0.03393 cum 88994.00 1 cum 3019.57
Cost of medium TW frame up to 2 m length 0.0117 cum 80094.00 1 cum 937.10
Cost of 4 mm thick pin headed glass 0.54 sqm 331.00 1 sqm 178.74
Cost of TW beading [ 2x2 (1.00+2x0.30)] 3.00 RM 24.00 1 rm 72.00
Cost of 30 mm thick flush shutter 1.640 sqm 1314.00 1 sqm 2154.96
Cost of MS Z hold fasts 6 Nos. 25.00 Each 150.00
Cost of MS poder coated tower bolt 200mm long 1 No. 56.00 Each 56.00
Cost of MS powder coated butt hinges 150mm
long 3 Nos. 44.00 Each 132.00
Cost of MS powder coated aldrop 300mm long 1 No. 181.00 Each 181.00
Cost of MS powder coated handle 150mm long 2 Nos. 50.00 Each 100.00
Cost of MS powder coated door stopper 1 No. 50.00 Each 50.00
Cost of rubber bush 1 No. 25.00 Each 25.00
Cost of 10mm MS square bars 1.413 Kgs 42575.25 1000 Kgs 60.16
Labour charges for frame work 0.0456 cum 9692.45 1 cum 442.27
Add for MA @ 25% 0.25 442.27 110.57
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 1.640 sqm 348.00 1 sqm 570.72
Add for MA @ 25% 0.25 570.72 142.68
Labour charges for fixing glass 0.54 sqm 260.00 1 sqm 140.40
Add for MA @ 25% 0.25 140.40 35.10
Add for nails & screws etc. 1.74
Rate for 2.34 sqm 8560.00
Overheads&Contractors Profit @13.615% 0.13615 8560.00 1165.44
9725.44
Rate for 1 sqm 4156.17
Say 4156

9 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI
marked flush door shutters of 30 mm thick double shutters with bond wood solid block board type Core having
cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory
made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost
and conveyance to site of teak wood frame, flush shutter including

supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder
coated fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts
(IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos.
rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour
charges for fixing the frame in position, fixing the shutter to the frame etc, including overheads & contractors profit
complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (2000mm x 2100mm)

(BLD-CSTN-13-16)
Size : 2.00m x 2.10m 4.20 Sqm
Quantity analysis
 Joinery data 87

Outer frame - Vertical 2 x 2.11

= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 2.00
= 2.00 x 0.10 x 0.065 0.01300 cum
0.04043 cum

30 mm thick flush shutter 2 x 0.95 x 2.05 3.895 sqm

Cost of medium TW frame 2 m to 3m length 0.02743 cum 88994.00 1 cum 2441.11

Cost of medium TW frame up to 2 m length 0.01300 cum 80094.00 1 cum 1041.22
Cost of 30 mm thick flush shutter 3.895 sqm 1314.00 1 sqm 5118.03
Cost of MS Z hold fasts 6 Nos. 25.00 Each 150.00
Cost of MS powder coated tower bolt 200mm
long 2 Nos. 56.00 Each 112.00
Cost of MS powder coated butt hinges 150mm
long 6 Nos. 44.00 Each 264.00
Cost of MS powder coated aldrop 300mm long 1 No. 181.00 Each 181.00
Cost of MS powder coated handle 150mm long 2 Nos. 50.00 Each 100.00
Cost of MS powder coated door stopper 2 Nos. 50.00 Each 100.00
Cost of rubber bush 2 Nos. 25.00 Each 50.00
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 3.895 sqm 348.00 1 sqm 1355.46
Add for MA @ 25% 0.25 1355.46 338.87
Add for nails & screws etc. 3.32
Rate for 4.20 sqm 11255.00
Rate for 1 sqm 2679.76
Overheads&Contractors Profit @13.615% 0.13615 2679.76 364.85
Rate for 1 sqm 3044.61
Say 3045
 Joinery data 88

10 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI
marked flush door shutters of 30 mm thick double shutters with bond wood solid block board type Core having
cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory
made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost
and conveyance to site of teak wood frame, flush shutter including

supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder
coated fixtures of 6 Nos. butt hinges (IS:205)150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts
(IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos.
rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour
charges for fixing the frame in position, fixing the shutter to the frame etc, including overheads & contractors profit
complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (1800mm x 2100mm)

(BLD-CSTN-13-16)
Size : 1.80m x 2.10m 3.78 Sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.80
= 1.80 x 0.10 x 0.065 0.01170 cum
0.03913 cum

30 mm thick flush shutter 2 x 0.85 x 2.05 3.485 sqm

Cost of medium TW frame 2 m to 3m length 0.0274 cum 88994.00 1 cum 2441.11

Cost of medium TW frame up to 2 m length 0.0117 cum 80094.00 1 cum 937.10
Cost of 30 mm thick flush shutter 3.485 sqm 1314.00 1 sqm 4579.29
Cost of MS Z hold fasts 6 Nos. 25.00 Each 150.00
Cost of MS powder coated tower bolt 200mm
long 2 Nos. 56.00 Each 112.00
Cost of MS powder coated butt hinges 150mm
long 6 Nos. 44.00 Each 264.00
Cost of MS powder coated aldrop 300mm long 1 No. 181.00 Each 181.00
Cost of MS powder coated handle 150mm long 2 Nos. 50.00 Each 100.00
Cost of MS powder coated door stopper 2 Nos. 50.00 Each 100.00
Cost of Rubber bush 2 Nos. 25.00 Each 50.00
Labour charges for frame work 0.03913 cum 9692.45 1 cum 379.27
Add for MA @ 25% 0.25 379.27 94.82
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 3.49 sqm 348.00 1 sqm 1212.78
Add for MA @ 25% 0.25 1212.78 303.20
Add for nails & screws etc. 5.45
Rate for 3.78 sqm 10910.00
Rate for 1 sqm 2886.24
Overheads&Contractors Profit @13.615% 0.13615 2886.24 392.96
Rate for 1 sqm 3279.21
Say 3279
 Joinery data 89

11 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI
marked flush door shutters of 30 mm thick double shutters with bond wood solid block board type Core having
cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory
made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost
and conveyance to site of teak wood frame, flush shutter including

supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder
coated fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts
(IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos.
rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour
charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit
complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (1500mm x 2100mm)

(BLD-CSTN-13-16)
Size : 1.50m x 2.10m 3.15 Sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.50
= 1.50 x 0.10 x 0.065 0.00975 cum
0.03718 cum

30 mm thick flush shutter 2 x 0.70 x 2.05 2.87 sqm

Cost of medium TW frame 2 m to 3m length 0.02743 cum 88994.00 1 cum 2441.11

Cost of medium TW frame up to 2 m length 0.00975 cum 80094.00 1 cum 780.92
Cost of 30 mm thick flush shutter 2.87 sqm 1314.00 1 sqm 3771.18
Cost of MS Z hold fasts 6 Nos. 25.00 Each 150.00
Cost of MS powder coated tower bolt 200mm
long 2 Nos. 56.00 Each 112.00
Cost of MS powder coated butt hinges 150mm
long 6 Nos. 44.00 Each 264.00
Cost of MS powder coated aldrop 300mm long 1 No. 181.00 Each 181.00
Cost of MS powder coated handle 150mm long 2 Nos. 50.00 Each 100.00
Cost of MS powder coated door stopper 2 Nos. 50.00 Each 100.00
Cost of rubber bush 2 Nos. 25.00 Each 50.00
Labour charges for frame work 0.03718 cum 9692.45 1 cum 360.37
Add for MA @ 25% 0.25 360.37 90.09
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 2.87 sqm 348.00 1 sqm 998.76
Add for MA @ 25% 0.25 998.76 249.69
Add for nails & screws etc. 5.89
Rate for 3.15 sqm 9655.00
Rate for 1 sqm 3065.08
Overheads&Contractors Profit @13.615% 0.13615 3065.08 417.31
Rate for 1 sqm 3482.39
Say 3482
 Joinery data 90

12 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI
marked flush door shutters of 30 mm thick double shutters with bond wood solid block board type Core having
cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory
made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost
and conveyance to site of teak wood frame, flush shutter including

supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder
coated fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts
(IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos.
rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour
charges for fixing the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit
complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in
flooring for a depth of not less than 10 mm) (1200mm x 2100mm)

(BLD-CSTN-13-16)
Size : 1.20m x 2.10m 2.52 Sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.20
= 1.20 x 0.10 x 0.065 0.00780 cum
0.03523 cum

30 mm thick flush shutter 2 x 0.55 x 2.05 2.255 sqm

Cost of medium TW frame 2 m to 3m length 0.0274 cum 88994.00 1 cum 2441.11

Cost of medium TW frame below 2 m length 0.0078 cum 80094.00 1 cum 624.73
Cost of 30 mm thick flush shutter 2.255 sqm 1314.00 1 sqm 2963.07
Cost of MS Z hold fasts 6 Nos. 25.00 Each 150.00
Cost of MS powder coated tower bolt 200mm
long 2 Nos. 56.00 Each 112.00
Cost of MS powder coated butt hinges 150mm
long 6 Nos. 44.00 Each 264.00
Cost of MS powder coated aldrop 300mm long 1 No. 181.00 Each 181.00
Cost of MS powder coated handle 150mm long 2 Nos. 50.00 Each 100.00
Cost of MS powder coated door stopper 2 Nos. 50.00 Each 100.00
Cost of rubber bush 2 Nos. 25.00 Each 50.00
Labour charges for frame work 0.035 cum 9692.45 1 cum 341.47
Add for MA @ 25% 0.25 341.47 85.37
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 2.255 sqm 348.00 1 sqm 784.74
Add for MA @ 25% 0.25 784.74 196.19
Add for nails & screws etc. 6.34
Rate for 2.52 sqm 8400.00
Rate for 1 sqm 3333.34
Overheads&Contractors Profit @13.615% 0.13615 3333.34 453.83
Rate for 1 sqm 3787.17
Say 3787
 Joinery data 91

13 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI
marked flush door shutters of 30 mm thick single shutter with bond wood solid block board type Core having
cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory
made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost
and conveyance to site of teak wood frame, flush shutter including supply and

fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated
fixtures of 3 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of
200 mm x 10 mm dia at top , 2 Nos. 150 mm long handles (IS:208), 1 No. door stopper and 1 No. rubber bush
including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing
the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for
finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth
of not less than 10 mm) (1000mm x 2100mm)

(BLD-CSTN-13-16)
Size : 1.00m x 2.10m 2.10 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 1.00
= 1.00 x 0.10 x 0.065 0.00650 cum
0.03393 cum

30 mm thick flush shutter 0.90 x 2.05 1.845 sqm

Cost analysis
Cost of medium TW frame 2 m to 3m length 0.02743 cum 88994.00 1 cum 2441.11
Cost of medium TW frame up to 2 m length 0.00650 cum 80094.00 1 cum 520.61
Cost of 30 mm thick flush shutter 1.845 sqm 1314.00 1 sqm 2424.33
Cost of MS Z hold fasts 6 Nos. 25.00 Each 150.00
Cost of MS powder coated tower bolt 200mm
long 1 No. 56.00 Each 56.00
Cost of MS powder coated butt hinges 150mm
long 3 Nos. 44.00 Each 132.00
Cost of MS powder coated aldrop 300mm long 1 No. 181.00 Each 181.00
Cost of MS powder coated handle 150mm long 2 Nos. 50.00 Each 100.00
Cost of MS powder coated door stopper 1 No. 50.00 Each 50.00
Cost of rubber bush 1 No. 25.00 Each 25.00
Labour charges for frame work 0.0339 cum 9692.45 1 cum 328.86
Add for MA @ 25% 0.25 328.86 82.22
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 1.845 sqm 348.00 1 sqm 642.06
Add for MA @ 25% 0.25 642.06 160.52
Add for nails & screws etc. 6.30
Rate for 2.10 sqm 7300.00
Overheads&Contractors Profit @13.615% 0.13615 7300.00 993.90
8293.90
Rate for 1 sqm 3949.48
Say 3949
 Joinery data 92

14 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65 mm and ISI
marked flush door shutters of 30 mm thick single shutter with bond wood solid block board type Core having
cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory
made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost
and conveyance to site of teak wood frame, flush shutter including supply and

fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated
fixtures of 3 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of
200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 1 No. door stopper and 1 No. rubber bush
including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing
the frame in position, fixing the shutter to the frame etc, including overheads & contractors profit complete for
finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth
of not less than 10 mm) (900mm x 2100mm)

(BLD-CSTN-13-16)
Size : 0.90m x 2.10m 1.89 sqm
Quantity analysis
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 0.90
= 0.90 x 0.10 x 0.065 0.00585 cum
0.03328 cum

30 mm thick flush shutter 0.80 x 2.05 1.64 sqm

Cost analysis
Cost of medium TW frame 2 m to 3m length 0.02743 cum 88994.00 1 cum 2441.11
Cost of medium TW frame up to 2 m length 0.00585 cum 80094.00 1 cum 468.55
Cost of 30 mm thick flush shutter 1.64 sqm 1314.00 1 sqm 2154.96
Cost of MS Z hold fasts 6 Nos. 25.00 Each 150.00
Cost of MS powder coated tower bolt 200mm
long 1 No. 56.00 Each 56.00
Cost of MS powder coated butt hinges 150mm
long 3 Nos. 44.00 Each 132.00
Cost of MS powder coated aldrop 300mm long 1 No. 181.00 Each 181.00
Cost of MS powder coated handle 150mm long 2 Nos. 50.00 Each 100.00
Cost of MS powder coated door stopper 1 No. 50.00 Each 50.00
Cost of rubber bush 1 No. 25.00 Each 25.00
Labour charges for frame work 0.03328 cum 9692.45 1 cum 322.56
Add for MA @ 25% 0.25 322.56 80.64
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 1.64 sqm 348.00 1 sqm 570.72
Add for MA @ 25% 0.25 570.72 142.68
Add for nails & screws etc. 4.78
Rate for 1.89 sqm 6880.00
Overheads&Contractors Profit @13.615% 0.13615 6880.00 936.71
7816.71
Rate for 1 sqm 4135.83
Say 4136
 Joinery data 93

15 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65mm and ISI
marked flush door shutter of 30mm thick single shutter with bond wood solid block board type Core having cross
bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made
conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and
conveyance to site of medium teak wood door frame, flush shutter, including suply and fixing 6 Nos. MS Z hold
fasts of size 300mm x 40mm x 5mm including ISI marked MS powder coated fixtures 3 Nos. butt hinges (IS:205) of
150mm long, 1 No. aldrop (IS:2681) 250 mm long,

1 No. tower bolt (IS:204) of 150 mm x 10mm dia, 2 Nos. 125mm long handles (IS:208),1 No. rubber bush including
supplying and fixing 1.20mm thick PVC sheet to full height of the shutter inside including labour charges for fixing
the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for
finished item of work as per APSS 1001 & 1002. (The vertical frame of door shall be embedded in flooring for deth
of not less than 10mm) ( 800mm x 2100mm )

(BLD-CSTN-13-16)
Quantity analysis Size : 0.80m x 2.10m 1.68 sqm
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 0.80
= 0.80 x 0.10 x 0.065 0.00520 cum
0.03263 cum

35 mm thick flush shutter 0.70 x 2.05 1.435 sqm

Cost analysis
Cost of medium TW frame 2 m to 3m length 0.02743 cum 88994.00 1 cum 2441.11
Cost of medium TW frame up to 2 m length 0.00520 cum 80094.00 1 cum 416.49
Cost of 30 mm thick flush shutter 1.435 sqm 1314.00 1 sqm 1885.59
Cost of MS Z hold fasts 6 Nos. 25.00 Each 150.00
Cost of MS powder coated tower bolt 150mm
long 1 No. 38.00 Each 38.00
Cost of MS powder coated butt hinges 150mm
long 3 Nos. 44.00 Each 132.00
Cost of MS powder coated aldrop 250mm long 1 No. 151.00 Each 151.00
Cost of MS powder coated handle 125mm long 1 No. 34.00 Each 34.00
Cost of rubber bush 1 No. 25.00 Each 25.00
Cost of 1.20mm thick PVC sheet 1.435 sqm 160.00 1 sqm 229.60
Cost of Fevicol & labour charges for fixing PVC
sheet 1.435 sqm 75.00 1 sqm 107.63
Labour charges for frame work 0.0326 cum 9692.45 1 cum 316.26
Add for MA @ 25% 0.25 316.26 79.07
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 1.435 sqm 348.00 1 sqm 499.38
Add for MA @ 25% 0.25 499.38 124.85
Add for nails & screws etc. 5.03
Rate for 1.68 sqm 6635.00
Overheads&Contractors Profit @13.615% 0.13615 6635.00 903.35
7538.35
Rate for 1 sqm 4487.11
Say 4487
 Joinery data 94

16 Supply and fixing doors as per drawings with medium teak wood frame of section 100mm x 65mm and ISI
marked flush door shutter of 30mm thick single shutter with bond wood solid block board type Core having cross
bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made
conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and
conveyance to site of medium teak wood door frame, flush shutter, including suply and fixing 6 Nos. MS Z hold
fasts of size 300mm x 40mm x 5mm including ISI marked MS powder coated fixtures 3 Nos. butt hinges (IS:205) of
150mm long, 1 No. aldrop (IS:2681) 250 mm long,

1 No. tower bolt (IS:204) of 150 mm x 10mm dia, 2 Nos. 125mm long handles (IS:208),1 No. rubber bush including
supplying and fixing 1.20mm thick PVC sheet to full height of the shutter inside including labour charges for fixing
the frame in position, fixing the shutter to the frame etc., including overheads & contractors profit complete for
finished item of work as per APSS 1001 & 1002. (The vertical frame of door shall be embedded in flooring for deth
of not less than 10mm) ( 750mm x 2100mm )

(BLD-CSTN-13-16)
Quantity analysis Size : 0.75m x 2.10m 1.575 sqm
Outer frame - Vertical 2 x 2.11
= 4.22 x 0.10 x 0.065 0.02743 cum
Outer frame - Horizontal 1 x 0.75
= 0.75 x 0.10 x 0.065 0.00488 cum
0.03231 cum

30 mm thick flush shutter 0.65 x 2.05 1.333 sqm

Cost analysis
Cost of medium TW frame 2 m to 3m length 0.02743 cum 88994.00 1 cum 2441.11
Cost of medium TW frame up to 2 m length 0.00488 cum 80094.00 1 cum 390.86
Cost of 30 mm thick flush shutter 1.333 sqm 1314.00 1 sqm 1751.56
Cost of MS Z hold fasts 6 Nos. 25.00 Each 150.00
Cost of MS powder coated tower bolt 150mm
long 1 No. 38.00 Each 38.00
Cost of MS powder coated Butt hinges 150mm
long 3 Nos. 44.00 Each 132.00
Cost of MS powder coated aldrop 250mm long 1 No. 151.00 Each 151.00
Cost of MS powder coated handle 125mm long 1 No. 34.00 Each 34.00
Cost of rubber bush 1 No. 25.00 Each 25.00
Cost of 1.20mm thick PVC sheet 1.333 sqm 160.00 1 sqm 213.28
cost of Fevicol & labour charges for fixing PVC
sheet 1.333 sqm 75.00 1 sqm 99.98
Labour charges for frame work 0.03231 cum 9692.45 1 cum 313.16
Add for MA @ 25% 0.25 313.16 78.29
Labour charges for fixing flush door shutter to the
frame , fixing the fixtures to the shutter 1.333 sqm 348.00 1 sqm 463.88
Add for MA @ 25% 0.25 463.88 115.97
Add for nails & screws etc. 6.91
Rate for 1.68 sqm 6405.00
Overheads&Contractors Profit @13.615% 0.13615 6405.00 872.04
7277.04
Rate for 1 sqm 4620.34
Say 4620
 Joinery data 95

17 Supply and fixing powder coated aluminium fully glazed swing door as per the approved drawing with fixed
fan light of 500mm height at top door using aluminium sections of 101.60 mmm x 44.45mm , 3.18 mm thick for
frame and door shutter made of styles , top and middle rail of 47.62mm x 44.45mm , 3.18 mm thick and bottom rail
of 114.30mm x 44.45 mm , 3.18mm thick,powder coating of alluminium sections 25mm microns thick, 5 mm thick
plain float glass fitted with suitable aluminium glazing clips and rubber beading in fan light portion, double shutters
fitted with 5mm thick frosted / ground glass in the top half and 12mm thick prelaminated particle board
( One side choice colour and other side balancing white lamnation ) in the bottom half fitted with suitable
aluminium glazing clips and rubber beading,shutters mounted on double action hydraulic floor spring of approved
brand manufacture IS : 6315 marked , Hardwyn make M-3000 for doors including cost of cutting floors as required ,
embedding in floors

and SS cover plates with brass pivot and sigle piece MS Sheet outer box with slide plate etc.complete (Weight
Capacity up to 130 Kgs) as approved by Engineer-in-Charge including supply and fixing ISI marked powder
coated aluminium fixtures of 4 Nos.tower bolts 10mm bolt (IS:204) 300mm long , 4 Nos.alluminium handles (IS:208)
150mm dia and 2 Nos. aldrops (IS:2681) 300mm long including labour charges for manufacturing door , fixing the
door with required No. of screws etc., including overheads & contractors profit complete for finished item of work.
(The Aluminium section used shall be standard make confirming to IS 1948 – 1961) and as approved by the
Engineer) (2000mmx2600mm)

(BLD-CSTN-13-31)
Quantity analysis Size : 2.00m x 2.60m 5.20 sqm

Outer frame (101.60 x 44.45, 3.18mm thick) 2 x 2.00 + 2 x 2.60 9.20 RM

Mullions (101.60 x 44.45, 3.18mm thick) 1 x 0.50 0.50 RM
9.70 RM
= 9.70 RM @ 2.404 Kgs / RM 23.319 Kgs.
Shutters, styles and rails(47.62mm x 44.45mm ,
3.18 mm thick) 4 x 2.10 + 2 x 2 x 1.00 12.40 RM
= 12.40 RM @1.501 Kgs/ RM 18.612 Kgs.

Bottom rails (114.30 x 44.45. 3.18mm thick) 2 x 1.00 2.00 RM

= 2.00 RM @ 2.646 Kgs / RM 5.292 Kgs.
2 x 2 x 2(1.00+0.50) +
2 x 2 x 2(1.00+1.20) +
Glazing clips 2 x 2 x 2(1.00+0.90) 44.80 RM
= 44.80 RM @ 0.101 Kgs /RM 4.525 Kgs.
51.748 Kgs.
5mm thick plain glass 2 x 1.00 x 0.50 1.00 sqm.
5mm thick ground glass 2 x 1.00 x 1.20 2.40 sqm.
12mm thick prelaminated paticle board 2 x 1.00 x 0.90 1.80 sqm.
Rubber beading 2 x 2(1.00+0.50)+2 x 2(1.00+1.20) 14.80 RM
Cost analysis
A.Material :
Cost of powder coated Al. sections 51.748 Kgs. 321.00 1 Kg. 16611.11
Cost of 5mm thick plain glass 1.00 sqm. 558.00 1 sqm. 558.00
5mm thick ground glass 2.40 sqm. 747.00 1 sqm. 1792.80
12mm thick prelaminated paticle board 1.80 sqm. 863.00 1 sqm. 1553.40
Cost of rubber beading 14.80 RM 2.00 1 RM 29.60
Cost of floor springs 2 Nos. 3788.00 Each 7576.00
Cost of Al. tower bolts 300mm 4 Nos. 198.00 Each 792.00
Cost of Al. round handles 150mm dia. 4 Nos. 100.00 Each 400.00
Cost of Al. aldrops 300mm 2 Nos. 425.00 Each 850.00
B.Labour charges 5.20 sqm. 614.23 1 sqm. 3194.01
Add for Screws, Nails, Nuts, Bolts etc., LS 3.09
Rate per 5.20 Sqm: 33360.00
Overheads&Contractors Profit @13.615% 0.13615 33360.00 4541.96
37901.97
Rate per 1 Sqm: 7288.84
Say 7289
 Joinery data 96

18 Supply and fixing powder coated aluminium fully glazed swing door as per the approved drawing with fixed
fan light of 500mm height at top door using aluminium sections of 101.60 mmm x 44.45mm , 3.18 mm thick for
frame and door shutter made of styles , top and middle rail of 47.62mm x 44.45mm , 3.18 mm thick and bottom rail
of 114.30mm x 44.45 mm , 3.18mm thick,powder coating of alluminium sections 25mm microns thick, 5 mm thick
plain float glass fitted with suitable aluminium glazing clips and rubber beading in fan light portion, double shutters
fitted with 5mm thick frosted / ground glass in the top half and 12mm thick prelaminated particle board
( One side choice colour and other side balancing white lamnation ) in the bottom half fitted with suitable
aluminium glazing clips and rubber beading,shutters mounted on double action hydraulic floor spring of approved
brand manufacture IS : 6315 marked , Hardwyn make M-3000 for doors including cost of cutting floors as required ,
embedding in floors

and SS cover plates with brass pivot and sigle piece MS Sheet outer box with slide plate etc.complete( Weight
Capacity up to 130 Kgs ) as approved by Engineer-in-Charge including supply and fixing ISI marked powder
coated aluminium fixtures of 4 Nos.tower bolts 10mm bolt (IS:204) 300mm long , 4 Nos.alluminium handles (IS:208)
150mm dia and 2 Nos. aldrops (IS:2681) 300mm long including labour charges for manufacturing door , fixing the
door with required No. of screws etc., including overheads & contractors profit complete for finished item of work.
(The Aluminium section used shall be standard make confirming to IS 1948 – 1961) and as approved by the
Engineer) (1800mmx2600mm)

(BLD-CSTN-13-31)
Quantity analysis Size : 1.80m x 2.60m 4.68 sqm

Outer frame (101.60 x 44.45, 3.18mm thick) 2 x 1.80 + 2 x 2.60 8.80 RM

Mullions (101.60 x 44.45, 3.18mm thick) 1 x 0.50 0.50 RM

9.30 RM
= 9.30 RM @ 2.404 Kgs / RM 22.357 Kgs.
Shutters, styles and rails(47.62mm x 44.45mm ,
3.18 mm thick) 4 x 2.10 + 2 x 2 x 0.90 12.00 RM
= 12.00 RM @1.501 Kgs/ RM 18.012 Kgs.

Bottom rails (114.30 x 44.45. 3.18mm thick) 2 x 0.90 1.80 RM

= 1.80 RM @ 2.646 Kgs / RM 4.763 Kgs.
2 x 2 x 2(0.90+0.50) +
2 x 2 x 2(0.90+1.20) +
Glazing clips 2 x 2 x 2(0.90+0.90) 42.40 RM
= 42.40 RM @ 0.101 Kgs /RM 4.282 Kgs.
49.414 Kgs.
5mm thick plain glass 2 x 0.90 x 0.50 0.90 sqm.
5mm thick ground glass 2 x 0.90 x 1.20 2.16 sqm.
12mm thick prelaminated paticle board 2 x 0.90 x 0.90 1.62 sqm.
Rubber beading 2 x 2(0.90+0.50)+2 x 2(0.90+1.20) 14.00 RM
Cost analysis
A.Material :
Cost of powder coated Al. sections 49.414 Kgs. 321.00 1 Kgs. 15861.89
Cost of 5mm thick plain glass 0.90 sqm. 558.00 1 sqm. 502.20
5mm thick ground glass 2.16 sqm. 747.00 1 sqm. 1613.52
12mm thick prelaminated paticle board 1.62 sqm. 863.00 1 sqm. 1398.06
Cost of rubber beading 14.00 RM 2.00 1 RM 28.00
Cost of floor springs 2 Nos. 3788.00 Each 7576.00
Cost of Al. tower bolts 300mm 4 Nos. 198.00 Each 792.00
Cost of Al. round handles 150mm dia. 4 Nos. 100.00 Each 400.00
Cost of Al. aldrops 300mm 2 Nos. 425.00 Each 850.00
B.Labour charges 4.68 sqm. 614.23 1 sqm. 2874.61
Add for Screws, Nails, Nuts, Bolts etc., LS 3.72
Rate per 4.68 Sqm: 31900.00
Overheads&Contractors Profit @13.615% 0.13615 31900.00 4343.18
36243.18
Rate per 1 Sqm: 7744.27
Say 7744
 Joinery data 97

19 Supply and fixing powder coated aluminium fully glazed swing door as per the approved drawing with fixed
fan light of 500mm height at top door using aluminium sections of 101.60 mmm x 44.45mm , 3.18 mm thick for
frame and door shutter made of styles , top and middle rail of 47.62mm x 44.45mm , 3.18 mm thick and bottom rail
of 114.30mm x 44.45 mm , 3.18mm thick,powder coating of alluminium sections 25mm microns thick, 5 mm thick
plain float glass fitted with suitable aluminium glazing clips and rubber beading in fan light portion, double shutters
fitted with 5mm thick frosted / ground glass in the top half and 12mm thick prelaminated particle board
( One side choice colour and other side balancing white lamnation ) in the bottom half fitted with suitable
aluminium glazing clips and rubber beading,shutters mounted on double action hydraulic floor spring of approved
brand manufacture IS : 6315 marked , Hardwyn make M-3000 for doors including cost of cutting floors as required ,
embedding in floors

and SS cover plates with brass pivot and sigle piece MS Sheet outer box with slide plate etc.complete( Weight
Capacity up to 130 Kgs ) as approved by Engineer-in-Charge including supply and fixing ISI marked powder
coated aluminium fixtures of 4 Nos.tower bolts 10mm bolt (IS:204) 300mm long , 4 Nos.alluminium handles (IS:208)
150mm dia and 2 Nos. aldrops (IS:2681) 300mm long including labour charges for manufacturing door , fixing the
door with required No. of screws etc., including overheads & contractors profit complete for finished item of work.
(The Aluminium section used shall be standard make confirming to IS 1948 – 1961) and as approved by the
Engineer) (1500mmx2600mm)

(BLD-CSTN-13-31)
Quantity analysis Size : 1.50m x 2.60m 3.90 sqm

Outer frame (101.60 x 44.45, 3.18mm thick) 2 x 1.50 + 2 x 2.60 8.20 RM

Mullions (101.60 x 44.45, 3.18mm thick) 1 x 0.50 0.50 RM

8.70 RM
= 8.70 RM @ 2.404 Kgs / RM 20.915 Kgs.
Shutters, styles and rails(47.62mm x 44.45mm ,
3.18 mm thick) 4 x 2.10 + 2 x 2 x 0.75 11.40 RM
= 11.40 RM @1.501 Kgs/ RM 17.111 Kgs.

Bottom rails (114.30 x 44.45. 3.18mm thick) 2 x 0.75 1.50 RM

= 1.50 RM @ 2.646 Kgs / RM 3.969 Kgs.
2 x 2 x 2(0.75+0.50) +
2 x 2 x 2(0.75+1.20) +
Glazing clips 2 x 2 x 2(0.75+0.90) 38.80 RM
= 38.80 RM @ 0.101 Kgs /RM 3.919 Kgs.
45.914 Kgs.
5mm thick plain glass 2 x 0.75 x 0.50 0.75 sqm.
5mm thick ground glass 2 x 0.75 x 1.20 1.80 sqm.
12mm thick prelaminated paticle board 2 x 0.75 x 0.90 1.35 sqm.
Rubber beading 2 x 2(0.75+0.50)+2 x 2(0.75+1.20) 12.80 RM
Cost analysis
A.Material :
Cost of powder coated Al. sections 45.91 Kgs. 321.00 1 Kgs. 14738.39
Cost of 5mm thick plain glass 0.75 sqm. 558.00 1 sqm. 418.50
5mm thick ground glass 1.80 sqm. 747.00 1 sqm. 1344.60
12mm thick prelaminated paticle board 1.35 sqm. 863.00 1 sqm. 1165.05
Cost of rubber beading 12.80 RM 2.00 1 RM 25.60
Cost of floor springs 2 Nos. 3788.00 Each 7576.00
Cost of Al. tower bolts 300mm 4 Nos. 198.00 Each 792.00
Cost of Al. round handles 150mm dia. 4 Nos. 100.00 Each 400.00
Cost of Al. aldrops 300mm 2 Nos. 425.00 Each 850.00
B.Labour charges 3.90 sqm. 614.23 1 sqm. 2395.50
Add for Screws, Nails, Nuts, Bolts etc., LS 4.35
Rate per 3.90 Sqm: 29710.00
Overheads&Contractors Profit @13.615% 0.13615 29710.00 4045.02
33755.02
Rate per 1 Sqm: 8655.13
Say 8655
 Joinery data 98

20 Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel
(base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with
Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic
Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint
thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of
0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam
joints at stile edges, in-fill of honeycomb Kraft paper used to give the required rigidity and effective acoustic
insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrops – 1 No., Butt Hinges – 3 Nos, Mortise Lock
of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws including
overheads and contractor profit etc.,complete for finished item of work for Single leaf Door

Rate as per SSR 1.00 Sqm 10283.00 1 Sqm 10283.00

Overheads&Contractors Profit @13.615% 0.14 10283.00 1400.03
Rate per 1 Sqm: 11683.03
Say 11683

21 Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel
(base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM). coated with
Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic
Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint
thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of
0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam
joints at stile edges, in-fill of honeycomb Kraft paper used to give the required rigidity and effective acoustic
insulation with 6” Tower bolt – 2 Nos., 6” D handles – 2 Nos., 10” Aldrops – 1 No., Butt Hinges – 6 Nos, Mortise Lock
of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws including
overheads and contractor profit etc., complete for finished item of work for Double leaf Door

Rate as per SSR 1.00 Sqm 10968.00 1 Sqm 10968.00

Overheads&Contractors Profit @13.615% 0.13615 10968.00 1493.29
Rate per 1 Sqm: 12461.29
Say 12461

22 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding doors three track - two glass
shutters sliding and one mesh shutter sliding- 95 -Series duly manufactured using UPVC reinforced profiles of (108
mm x 45 mm)/(95.50 mm x 60 mm) x 2.0 mm for outer frames, (75 mm x 39 mm)/(66 mm x 42 mm) x 2.0 mm for
sliding door shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized
up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash
shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter shall be made of (48.5 mm x 30
mm))/(50 mm x 26.5 mm) x 2.0 mm UPVC profile section and fitted with nylon/polymer mesh and rollers/pulley duly
fixed with TPV Gaskets/ EPDM weathering seal resistant accessories like clipping locking system made of
aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber
sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour
charges for transportation, erection at site with templates for casement sizing, overheads and contractors profit etc.,
complete for finished item of work

Rate as per SSR 1.00 Sqm 7066.00 1.00 Sqm 7066.00

Overheads&Contractors Profit @13.615% 0.14 7066.00 962.04
Rate for 1 Sqm 8028.04
Say 8028

23 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) openable doors with openable shutters duly
manufactured using UPVC reinforced profiles of 60 mm x 55 mm x 2.0 mm for outer frames, 70 mm x 60 mm x 2.25
mm for mullion sections as per the need and 102 mm x 60 mm x 2.0 mm for openable shutter frame capable of
mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum
thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick
clear float glass of reputed make duly fixed with TPV Gaskets/ EPDM weathering seal resistant and accessories for
openable door - hinges of stainless steel grade 304- 3 Nos., per shutter handle with mazak alloy casting 1 No. per
shutter, locking system suitably concealed 1 No., with raiser wedges for smooth operation and the system is to be
installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost
and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for
casement sizing, overheads and contractors profit etc., complete for finished item of work

Rate as per SSR 1.00 Sqm 8009.00 1.00 Sqm 8009.00

Overheads&Contractors Profit @13.615% 0.13615 8009.00 1090.43
Rate for 1 Sqm 9099.43
Say 9099
 Joinery data 99

24 Providing & Fixing of Openable Windows with Fly-mesh made of pre-painted steel (Base Steel as per IS 513
of 0.58 mm thick galvanized as per IS 277 with zinc of 150 GSM) primer coated with epoxy primer of 5-7 microns
thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd
backer and the section for outer frame of 72 x 55mm, centre mullion of 72 x 50mm, section for fixed glass beading
section of 12 x 12 mm and section for shutters of 48 x 25 mm and outer frame & mullion sections with rebate for
glazed shutters, fly mesh and a 20 mm provision for guard bars/grills and fly mesh shutter section of 20 x 40 mm
and the sections cut to length metre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles,
latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 4mm thick pin headed glass and
S.S. Mesh for fly mesh shutter (304 grade), fitted using rubber gaskets including fixing the windows in the
concrete/masonry wall by means of self expanding screws, including 10mm Square guard bars with 6” (152.4mm)
pitch including overheads and contractor profit etc., complete for finished item of work

a Centre fixed both side openable shutter window : 1800mm x1800mm 3.24 sqm
Window portion 2.34 Sqm 6377.00 1 Sqm 14922.18
Fan light portion 0.90 Sqm 4724.00 1 Sqm 4251.60
Rate per 3.24 sqm 19173.78
Rate per 1 sqm 5917.83
deduct cost of 5mm plain glass 1.00 Sqm 558.00 1 Sqm -558.00
add cost of 4mm thick pin headed glass 1.00 Sqm 331.00 1 Sqm 331.00
5690.83
Overheads&Contractors Profit @13.615% 0.13615 5690.83 774.81
Rate per 1 sqm 6465.64
Say 6466

b Centre fixed both side openable shutter window : 1500mm x1800mm 2.70 sqm
Window portion 1.95 Sqm 7288.00 1 Sqm 14211.60
Fan light portion 0.75 Sqm 4724.00 1 Sqm 3543.00
Rate per 2.70 sqm 17754.60
Rate per 1 sqm 6575.78
deduct cost of 5mm plain glass 1.00 Sqm 558.00 1 Sqm -558.00
add cost of 4mm thick pin headed glass 1.00 Sqm 331.00 1 Sqm 331.00
6348.78
Overheads&Contractors Profit @13.615% 0.13615 6348.78 864.39
Rate per 1 sqm 7213.16
Say 7213

c Double shutter window 1200x1800 with fixed fan light of 500mm at top : 3.06 sqm
Window portion 2.16 Sqm 8017.00 1 Sqm 17316.72
Fan light portion 0.90 Sqm 4724.00 1 Sqm 4251.60
Rate per 2.16 sqm 21568.32
Rate per 1 sqm 7048.47
deduct cost of 5mm plain glass 1.00 Sqm 558.00 1 Sqm -558.00
add cost of 4mm thick pin headed glass 1.00 Sqm 331.00 1 Sqm 331.00
6821.47
Overheads&Contractors Profit @13.615% 0.13615 6821.47 928.74
Rate per 1 sqm 7750.21
Say 7750

d Double shutter window 900x1800 with fixed fan light of 500mm at top : 1.62 sqm
Window portion 1.17 Sqm 8017.00 1 Sqm 9379.89
Fan light portion 0.45 Sqm 4724.00 1 Sqm 2125.80
Rate per 1.62 sqm 11505.69
Rate per 1 sqm 7102.28
deduct cost of 5mm plain glass 1.00 Sqm 558.00 1 Sqm -558.00
add cost of 4mm thick pin headed glass 1.00 Sqm 331.00 1 Sqm 331.00
6875.28
Overheads&Contractors Profit @13.615% 0.13615 6875.28 936.07
Rate per 1 sqm 7811.35
Say 7811
 Joinery data 100

e Centre fixed both side openable shutter window 1800mmx1300mm : 2.34 sqm
Window portion 2.34 Sqm 6377.00 1 Sqm 14922.18
Rate per 1 sqm 6377.00
deduct cost of 5mm plain glass 1.00 Sqm 558.00 1 Sqm -558.00
add cost of 4mm thick pin headed glass 1.00 Sqm 331.00 1 Sqm 331.00
6150.00
Overheads&Contractors Profit @13.615% 0.13615 6150.00 837.32
Rate per 1 sqm 6987.32
Say 6987

f Centre fixed both side openable shutter window 1500mmx1300mm : 1.95 sqm
Window portion 1.95 Sqm 7288.00 1 Sqm 14211.60
Rate per 1 sqm 7288.00
deduct cost of 5mm plain glass 1.00 Sqm 558.00 1 Sqm -558.00
add cost of 4mm thick pin headed glass 1.00 Sqm 331.00 1 Sqm 331.00
7061.00
Overheads&Contractors Profit @13.615% 0.13615 7061.00 961.36
Rate per 1 sqm 8022.36
Say 8022

g Double shutter window 1200mmx1300mm : 1.56 sqm

Window portion 1.56 Sqm 8017.00 1 Sqm 12506.52
Rate per 1 sqm 8017.00
deduct cost of 5mm plain glass 1.00 Sqm 558.00 1 Sqm -558.00
add cost of 4mm thick pin headed glass 1.00 Sqm 331.00 1 Sqm 331.00
7790.00
Overheads&Contractors Profit @13.615% 0.13615 7790.00 1060.61
Rate per 1 sqm 8850.61
Say 8851

h Double shutter window 900mmx1300mm: 1.17 sqm

Window portion 1.17 Sqm 8017.00 1 Sqm 9379.89
Rate per 1 sqm 8017.00
deduct cost of 5mm plain glass 1.00 Sqm 558.00 1 Sqm -558.00
add cost of 4mm thick pin headed glass 1.00 Sqm 331.00 1 Sqm 331.00
7790.00
Overheads&Contractors Profit @13.615% 0.13615 7790.00 1060.61
Rate per 1 sqm 8850.61
Say 8851
 Joinery data 101

25 Supply and fixing of pre-painted steel windows & top hung and fixed louvered ventilators made of pre -
painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120
GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns
thick and back coated with 5-7 microns thick alkyd backer, section for outer frame of 46 x 52 mm section and for
shutter of 46 x 46 mm section for mullion 46 x 70 mm, and section for beading should be 18 x 25 mm and section for
louvered ventilation of 33 x 56 mm Box section and the windows panelled with 4 mm thick pin headed glass & 4 mm
pinhead glass for ventilators with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length
mitre joined with corner brocket centre mullions fixed using mullion cap and with handle made of high grade
aluminium powder coated and nylon receiver, corner brackets made of CRCA with Zinc Phosphate, Mullion caps
made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self expanding screws including
10 mm square guard bars with 6" pitch including overheads & contractors profit etc., complete for finished item of
work.

A) WINDOWS
a Centre fixed both side openable shutter window 1800x1800 with fixed fan light of 500mm
at top : 3.24 sqm
Window portion 2.34 Sqm 5952.00 1 Sqm 13927.68
Fan light portion 0.90 Sqm 4724.00 1 Sqm 4251.60
Rate per 3.24 sqm 18179.28
Rate per 1 sqm 5610.89
deduct cost of 5mm plain glass 1.00 Sqm 558.00 1 Sqm -558.00
add cost of 4mm thick pin headed glass 1.00 Sqm 331.00 1 Sqm 331.00
5383.89
Overheads&Contractors Profit @13.615% 0.13615 5383.89 733.02
Rate per 1 sqm 6116.91
Say 6117

b Centre fixed both side openable shutter window 1500x1800 with fixed fan light of 500mm
at top : 2.70 sqm
Window portion 1.95 Sqm 5952.00 1 Sqm 11606.40
Fan light portion 0.75 Sqm 4724.00 1 Sqm 3543.00
Rate per 2.70 sqm 15149.40
Rate per 1 sqm 5610.89
deduct cost of 5mm plain glass 1.00 Sqm 558.00 1 Sqm -558.00
add cost of 4mm thick pin headed glass 1.00 Sqm 331.00 1 Sqm 331.00
5383.89
Overheads&Contractors Profit @13.615% 0.13615 5383.89 733.02
Rate per 1 sqm 6116.91
Say 6117

c Double shutter window 1200x1800 with fixed fan light of 500mm at top : 2.16 sqm
Window portion 1.56 Sqm 6681.00 1 Sqm 10422.36
Fan light portion 0.60 Sqm 4724.00 1 Sqm 2834.40
Rate per 2.16 sqm 13256.76
Rate per 1 sqm 6137.39
deduct cost of 5mm plain glass 1.00 Sqm 558.00 1 Sqm -558.00
add cost of 4mm thick pin headed glass 1.00 Sqm 331.00 1 Sqm 331.00
5910.39
Overheads&Contractors Profit @13.615% 0.13615 5910.39 804.70
Rate per 1 sqm 6715.09
Say 6715

d Double shutter window 900x1800 with fixed fan light of 500mm at top : 1.62 sqm
Window portion 1.17 Sqm 6681.00 1 Sqm 7816.77
Fan light portion 0.45 Sqm 4724.00 1 Sqm 2125.80
Rate per 1.62 sqm 9942.57
Rate per 1 sqm 6137.39
deduct cost of 5mm plain glass 1.00 Sqm 558.00 1 Sqm -558.00
add cost of 4mm thick pin headed glass 1.00 Sqm 331.00 1 Sqm 331.00
5910.39
Overheads&Contractors Profit @13.615% 0.13615 5910.39 804.70
Rate per 1 sqm 6715.09
Say 6715

e Centre fixed both side openable shutter window 1800mmx1300mm :

 Joinery data 102

Rate as per SSR 1.00 Sqm 5952.00 1 Sqm 5952.00

deduct cost of 5mm plain glass 1.00 Sqm 558.00 1 Sqm -558.00
add cost of 4mm thick pin headed glass 1.00 Sqm 331.00 1 Sqm 331.00
5725.00
Overheads&Contractors Profit @13.615% 0.13615 5725.00 779.46
Rate per 1 sqm 6504.46
Say 6504

f Centre fixed both side openable shutter window 1500mmx1300mm :

Rate as per SSR 1.00 Sqm 5952.00 1 Sqm 5952.00
deduct cost of 5mm plain glass 1.00 Sqm 558.00 1 Sqm -558.00
add cost of 4mm thick pin headed glass 1.00 Sqm 331.00 1 Sqm 331.00
5725.00
Overheads&Contractors Profit @13.615% 0.13615 5725.00 779.46
Rate per 1 sqm 6504.46
Say 6504

g Double shutter window 1200mmx1300mm :

Rate as per SSR 1.00 Sqm 6681.00 1.00 Sqm 6681.00
deduct cost of 5mm plain glass 1.00 Sqm 558.00 1 Sqm -558.00
add cost of 4mm thick pin headed glass 1.00 Sqm 331.00 1 Sqm 331.00
6454.00
Overheads&Contractors Profit @13.615% 0.13615 6454.00 878.71
Rate per 1 sqm 7332.71
Say 7333

h Double shutter window 900mmx1300mm :

Rate as per SSR 1.00 Sqm 6681.00 1.00 Sqm 6681.00
deduct cost of 5mm plain glass 1.00 Sqm 558.00 1 Sqm -558.00
add cost of 4mm thick pin headed glass 1.00 Sqm 331.00 1 Sqm 331.00
6454.00
Overheads&Contractors Profit @13.615% 0.13615 6454.00 878.71
Rate per 1 sqm 7332.71
Say 7333

B) VENTILATORS :
a Top Hung of any size 1.00 Sqm 6924.00 1 Sqm 6924.00
Overheads&Contractors Profit @13.615% 0.13615 6924.00 942.70
Rate for 1 Sqm 7866.70
Say 7867

b Fixed louvered of any size 1.00 Sqm 4737.00 1 Sqm 4737.00

Overheads&Contractors Profit @13.615% 0.13615 4737.00 644.94
Rate for 1 Sqm 5381.94
Say 5382
 Joinery data 103

26 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding windows two track sliding duly
manufactured using UPVC reinforced profiles of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.0 mm for outer frames, (66
mm x 38 mm)/(58 mm x 39 mm) x 2.0 mm for sliding shutter frames capable of mounting single glazing system,
structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated &
welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make duly
fixed with TPV Gaskets/ EPDM weathering seal resistant accessories like locking system 1 No., per set of sashes
and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at
site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at
site with templates for casement sizing, overheads and contractors profit etc., complete for finished item of work

Rate as per SSR 1.00 Sqm 6391.00 1.00 Sqm 6391.00

Overheads&Contractors Profit @13.615% 0.13615 6391.00 870.13
Rate for 1 Sqm 7261.13
Say 7261

27 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding windows three track - two glass
shutters sliding and one mesh shutter duly manufactured using UPVC reinforced profiles of (94 mm x 45 mm)/(80
mm x 52 mm) x 2.0 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.0 mm for sliding shutter frames
capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of
minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5
mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x
2 mm fitted with nylon/ polymer mesh on rollers/ pulley duly fixed with TPV Gaskets/ EPDM weathering seal
resistant accessories like locking system 1 No., per set of sashes and the system is to be installed at the site using
anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all
materials, accessories, labour charges for transportation, erection at site with templates for casement sizing,
overheads and contractors profit etc., complete for finished item of work

Rate as per SSR 1.00 Sqm 6674.00 1.00 Sqm 6674.00

Overheads&Contractors Profit @13.615% 0.13615 6674.00 908.67
Rate for 1 Sqm 7582.67
Say 7583

28 Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) casement windows openable shutters duly
manufactured using UPVC reinforced profiles of 60 mm x 55 mm x 2.0 mm for outer frames, 70 mm x 60 mm x 2.0
mm for mullion sections for two or more openable shutters 70 mm x 60 mm x 2.0 mm for openable shutter frame
capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of
minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5
mm thick clear float glass of reputed make duly fixed with TPV Gaskets/ EPDM weathering seal resistant and
accessories for casement window - friction stay hinges of stainless steel grade 304- 2 Nos., per sash, handle with
mazak alloy casting 1 No. per sash, multipoint locking system suitably concealed 1 No., per sash provided with
raiser wedges for smooth operation and the system is to be installed at the site using anchor fasteners, silicon
rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories,
labour charges for transportation, erection at site with templates for casement sizing, overheads and contractor profit
etc., complete for finished item of work

Rate as per SSR 1.00 Sqm 7051.00 1.00 Sqm 7051.00

Overheads&Contractors Profit @13.615% 0.13615 7051.00 959.99
Rate for 1 Sqm 8010.99
Say 8011
29 Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered UPVC sections with
TPV gaskets having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer
frame having an overall size of 60 x 55 mm with reinforcement of 1 mm thickness and Mullion with overall size of 74
x 60 mm with reinforcement of 1 mm thickness. Ventilator shall be provided with 4.5 mm pin head glass, standard
hardware, wall thickness of frame & mullion shall be 2.0 mm including cost and conveyance of all materials,
accessories, labour charges for transportation, erection at site, overheads and contractor profit etc., complete for
finished item of work

Rate as per SSR 1.00 Sqm 6005.00 1.00 Sqm 6005.00

Overheads&Contractors Profit @13.615% 0.13615 6005.00 817.58
Rate for 1 Sqm 6822.58
Say 6823
 Joinery data 104

30 Providing, supplying & fixing of Top hung Ventilator with exhaust fan provision made out of multi chambered
UPVC sections with TPV gaskets having isolated drainage and reinforced with Galvanized Iron profiles throughout
the window. The outer frame having an overall size of 60 x 55 mm with reinforcement of 1 mm thickness, Mullion
with overall size of 74 x 60 mm with reinforcement of 1 mm thickness and Sash with overall size of 75 x 60 mm with
reinforcement of 1.5 mm thickness. Glazing bead for fixing of glass shall be of size 34 x 20 mm coextruded with
gasket. Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware, single point locking and friction
stays. Wall thickness of frame, mullion and sash shall be 2.0 mm including cost and conveyance of all materials,
accessories, labour charges for transportation, erection at site, overheads and contractor profit etc., complete for
finished item of work

Rate as per SSR 1.00 Sqm 8450.00 1.00 Sqm 8450.00

Overheads&Contractors Profit @13.615% 0.13615 8450.00 1150.47
Rate for 1 Sqm 9600.47
Say 9600

31 Supplying and fixing of 7.5mm thick Aluminium Grill (as approved by the department) 3.58 Kg/Sqm including
cost and conveyance of all materials, accessories, labour charges for transportation, erection at site, overheads and
contractor profit etc., complete for finished item of work

Rate as per SSR 1.00 Sqm 1112.00 1.00 Sqm 1112.00

Overheads&Contractors Profit @13.615% 0.14 1112.00 151.40
Rate for 1 Sqm 1263.40
Say 1263

32 Supplying and fixing of MS Grill to windows / in open court yards using 25mm x 6mm MS flat alround and 10mm
MS square bars horizontally at 125mm centre to centre and vertically at 300mm centre to centre including fixing with
4 Nos of MS Z holdfasts (2 on each side) duly making cutting brick masonry, fixing and making to original surface
neatly and painting grill with one coat of red oxide primer including cost all taxes and conveyance of all materials
including cutting, bending, welding including all operational charges and all labour charges etc., complete for
finished item of work.

For1.80mx1.70m size 3.06 Sqm

Quantity Anailysis
Cost of 25mm x 6mm MS flat alround 2 ( 1.80+ 1.70 ) 7.00 RM
7.00 RM @ 1.20 Kgs/RM 8.40 Kgs

Cost of 10mm M.S square bars @0.785 kg /RM

Vertical bars 6 6 x 1.70 10.20
Horizontal bars 13 13 x 1.80 23.40
33.60 RM 26.38 Kgs
34.78 Kgs
Cost Analysis
Cost of 10mm MS squre bars 26.38 Kgs 42575.25 1000 Kgs 1122.96
Cost of 25X 6mm MS Flat 8.40 Kgs 42075.25 1000 Kgs 353.43
Labour charges for fabrication of steel 34.78 Kgs 24.00 1 Kg 834.62
Labour charges for fixing 34.78 4.00 139.10
Add for MA @ 25% 0.25 472.95 118.24
Rate per 3.06 Sqm 2568.36
839.33
Overheads&Contractors Profit @13.615% 0.13615 839.33 114.28
953.61
Rate per 1 Sqm Say 954

33 Providing and fixing of Two shutter Sliding Windows made of Galvanized Steel (Base Steel as per IS 513, D
quality, galvanized as per IS 277 with Zinc of 120 GSM), using factory made section powder coated with Pure
polyester powder up to 50-60 microns thick with total coated thickness of 0.8 mm for Outer Frame and 0.58 mm
thickness for Sliding Shutter Section, the Outer Frame for Two Tracks with Grill provision size of 90 mm x 50 mm
and without grill provision is of 75 mm x 50 mm and the Window Shutter section of 58 mm x 36 mm and the outer
Frame with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash
frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick
plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of
Aluminium 1 No. per each shutter and cut to length mitre joined with corner brackets including installation of window
system at site using anchor fasteners, Silicon sealant applied at the Outer frame corners inclusive of conveyance of
all materials accessories, labour charges, and erection at site including overheads & contractors profit etc.,
complete finished item of work.
 Joinery data 105

Window with Two Sliding Shutters and with Grill Outer Frame Size 90 mm x 50 mm have a rebate of 15mm x 5 mm
to fit grill made of 10mm MS Sq Rods for horizontal bars welded at a regular pitch of 150mm to 12mm x 6 mm MS
flat.
Rate as per SSR 1.00 Sqm 5880.00 1.00 Sqm 5880.00
Overheads&Contractors Profit @13.615% 0.13615 5880.00 800.56
Rate for 1 Sqm 6680.56
Say 6681

34 Providing and fixing of Three shutter Sliding Windows made of Galvanized Steel (Base Steel as per IS 513, D
quality, galvanized as per IS 277 with Zinc of 120 GSM), using factory made section powder coated with Pure
polyester powder up to 50-60 microns thick with total coated thickness of 0.8 mm for Outer Frame and 0.58 mm
thickness for Sliding Shutter Section, the Outer Frame for three tracks with grill provision size of 105 mm x 50 mm
and without grill provision is of 90 mm x 50 mm and the Window Shutter section of 58 mm x 36 mm and the outer
Frame with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash
frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick
plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of
Aluminium 1 No. per each shutter and cut to length mitre joined with corner brackets including installation of window
system at site using anchor fasteners, Silicon sealant applied at the Outer frame corners inclusive of conveyance of
all materials accessories, labour charges, and erection at site including overheads & contractors profit etc.,
complete finished item of work.

Centre Shutter Fixed: centre shutter frame made of section with size 20mm x 47mm should be fitted with 5mm thick
plain float glass of reputed make, EPDM gasket all around the glass and fixed to the Outer Frame with the
supporting section of size 29mm x 20mm of 0.58mm thick fixed horizontally on top and bottom of the shutter frame.
Rate as per SSR 1.00 Sqm 6212.00 1.00 Sqm 6212.00
Overheads&Contractors Profit @14% 0.13615 6212.00 845.76
Rate for 1 Sqm 7057.76
Say 7058
 Joinery data 106

35 Supply and fixing powder coated alimunium fully glazed 2 shutter windows with fixed panel in between
openable shutters as per approved drawings using anodized aluminium sections of 38.50mm x 33mm , 3mm thick
for outer frame, 59mm(3mm) x 33mm(2.5mm) x 30mm(3mm) for mullions and 38.5mm x 33mm , 3mm thick for
shutter frame , powder coating of alluminium sections 25mm microns thick and fixing 5 mm thick plain glass fitted
with suitable aluminium galzing clips and rubber beading including supplying and fixing powder coated aluminium
adjustable frictional stay hinges (2 Nos. per shutter), handle with lock (1 No. per shutter) including cost and
conveyance to site of powder coated aluminium sections, glass, rubber beading, fixtures etc., including labour
charges for manufacturing window, fixing in position using wooden blocks and sheet metal screws, etc., complete for
finished item of work in all floors. (The aluminium sections used shall be standard make confirming to IS 1948-1961
and as approved by the Engineer and fixtures shall be of ISI marked) (1800mm x 1300mm).

Quantity analysis Size : 1.80m x 1.30m 2.34 sqm

1) Outer frame ( 38.50mm x 33mm, 3mm thick ) 2 ( 1.80 + 1.30 )

6.20 RM @ 0.775 Kgs / RM 4.81 Kgs.
2) Mullions[59mm (3mm) x 33mm (2.50mm) x
30mm (3mm) ] 2 x 1.30
2.60 RM @ 1.123 Kgs / RM 2.92 Kgs.
3) Shutters Z Section (38.50mm x 33mm x, 3mm
thick 3x2(0.60 +1.30)
= 11.40 RM @ 0.663 Kgs/ RM 7.56 Kgs.
4) Glazing clips 3x2(0.60+1.30)
= 11.40 RM @ 0.101 Kgs /RM 1.15 Kgs.
16.44 Kgs.
Cost analysis
Cost of powder coated Al. sections 16.44 Kgs. 321.00 1 Kgs. 5277.24
Cost of 5mm thick plain glass 2.34 sq.m. 558.00 1 sq.m. 1305.72
Cost of rubber beading 11.40 RM 2.00 1 RM 22.80
Cost of Al. friction stay hinges 4 Nos. 107.00 1 Each 428.00
Cost of Al. lock with handle 2 Nos. 65.00 1 Each 130.00
Labour charges 2.34 Sqm. 667.53 1 Sqm. 1562.03
Add for Screws, Nails, etc., LS 3.78
8729.57
Overheads&Contractors Profit @13.615% 0.13615 8729.57 1188.53
Rate per 2.34 Sqm: 9918.10
Rate per 1 Sqm: 4238.50
Say 4239
 Joinery data 107

36 Supply and fixing powder coated alimunium fully glazed top hung ventilators fixed with 5mm thick plain glass
using suitable alluminium glazing clips and rubber beading as per approved drawings using anodized aluminium
sections of 38.50mm x 33mm , 3mm thick for outer frame, 59mm(3mm) x 33mm(2.5mm) x 30mm(3mm) for
mullions shutters z section of 38.50mmx33mm,3mm thick,powder coating of all alluminium sections 25mm microns
thick, including cost and conveyance to site of powder coated aluminium sections, glass, rubber beading, fixtures
etc., including labour charges for manufacturing window, fixing in position using wooden blocks and sheet metal
screws, etc., complete for finished item of work. (The aluminium sections used shall be standard make confirming to
IS 1948-1961 and as approved by the Engineer and fixtures shall be of ISI marked) (900mm x 500mm).

Quantity analysis Size : 0.90mx 0.50m 0.45 sqm

1) Outer frame ( 38.50mm x 33mm, 3mm thick ) 2 ( 0.90 + 0.50 )

= 2.80 RM @ 0.775 Kgs / RM 2.17 Kgs.
2) Shutters Z Section (38.50mm x 33mm x, 3mm
thick 2x2(0.45+0.50)
= 3.80 RM @ 0.663 Kgs / RM 2.52 Kgs.
3) Glazing clips 2x2(0.45+0.50)
= 3.80 RM @ 0.101 Kgs /RM. 0.38 Kgs.
5.07 Kgs.
Cost analysis
Cost of powder coated Al. sections 5.07 Kgs. 321.00 1 Kgs. 1627.47
Cost of 5mm thick plain glass 0.45 sq.m. 558.00 1 sq.m. 251.10
Cost of rubber beading 3.80 RM 2.00 1 RM 7.60
Labour charges 0.45 Sqm. 667.53 1 Sqm. 300.39
Add for Screws, Nails, Nuts, Bolts LS 2.75
2189.31
Overheads&Contractors Profit @13.615% 0.13615 2189.31 298.07
Rate per 0.45 Sqm 2487.39
Rate per 1 Sqm 5527.52
Say 5528
 Joinery data 108

37 Supply and fixing powder coated alimunium sliding window with fixed fan light at top as per approved
drawings with all required accessories such as stoppers,bolts,weather stripping etc. for all sizes and sections in
accordance with approved drawings and as per IS 1948-1961 with top section of window of size 62mm x 32mm ,
1.47mm thick, window side frames of size 61.85mm x 31.75mm,1.50mm thick and bottom frame size 61.85mm x
31.75mm,1.50mm thick sloping outwards for drainage and fixed and sliding shutters with bottom,sides and top with
section of 40mm x 18mm ,1.70mm thick,inter locking section 40mm x 28mm x 18mm,1.60mm thick inter locked for
weather scaling and mounted on nylon rollers of lift type and fan light top &side sections of size
63.50mmx38.10mm,1.53mm thick, powder coating of all alluminium sections 25mm microns thick and fixing 5mm
thick plain glass in fan light and for shutters fitted with

alluminium glazing clips and rubber beading including cost and conveyance to site of powder coated aluminium
sections, glass, rubber beading, fixtures etc., including labour charges for manufacturing window, fixing in position
using wooden blocks and sheet metal screws, overheads & contractors profit etc., complete for finished item of
work. (The aluminium sections used shall be standard make confirming to IS 1948-1961 and as approved by the
Engineer and fixtures shall be of ISI marked) ( 1800mm x 1800mm )

(BLD-CSTN-13-30 & S.No.10 of SoR , page 395)

Size 1.80m x 1.80m 3.24 sqm
Quantity analysis
Window frame
bottom : (8932) 1.80m 0.909 Kgs/RM 1.636 Kgs.
sides : (8931) 2 x 1.30m 0.784 Kgs/RM 2.038 Kgs.
top : (8992) 1.80m 1.005 Kgs/RM 1.809 Kgs.
fan light sides&top(4687) 2x0.50+ 1.80+2x 0.50 0.942 Kgs/RM 2.638 Kgs.
Window shutters
bottom : (8603) 3 x 0.60m 0.641 Kgs/RM 11.54 Kgs.
plain sides & top : (8604) 3 (1.30+0.60) 0.522 Kgs/RM 2.975 Kgs.
sides inter locking : (8602) 3 x 1.30m 0.663 Kgs/RM 2.586 Kgs.
Glazing clips 3x2(0.60+0.50)+3x2x(0.60+1.30)
= 18.00 RM @ 0.101 Kgs /RM 1.818 Kgs.
27.038 Kgs.

5mm thick plain glass 1.80m x 1.80m 3.24 sqm

Rubber beading 9.00 RM

Cost analysis
A.Material :
Cost of powder coated Al. sections 27.038 Kgs. 321.00 1 Kgs. 8679.20
Cost of 5mm thick plain glass 3.24 sqm. 558.00 1 sqm. 1807.92
Cost of rubber beading 9.00 RM 2.00 1 RM 18.00
B.Labour charges 3.24 sqm 642.44 1 sqm 2081.51
Add for Screws, Nails, Nuts, Bolts etc., LS 11.76
Rate per 3.06 Sqm: 12598.39
Overheads&Contractors Profit @13.615% 0.13615 12598.39 1715.27
14313.66
Rate per 1 Sqm 4417.79
Say 4418
 Joinery data 109

38 Supply and fixing powder coated alimunium sliding window with fixed fan light at top as per approved drawings
with all required accessories such as stoppers,bolts,weather stripping etc. for all sizes and sections in accordance
with approved drawings and as per IS 1948-1961 with top section of window of size 62mm x 32mm ,1.47mm thick,
window side frames of size 61.85mm x 31.75mm,1.50mm thick and bottom frame size 61.85mm x
31.75mm,1.50mm thick sloping outwards for drainage and fixed and sliding shutters with bottom,sides and top with
section of 40mm x 18mm ,1.70mm thick,inter locking section 40mm x 28mm x 18mm,1.60mm thick inter locked for
weather scaling and mounted on nylon rollers of lift type and fan light top &side sections of size
63.50mmx38.10mm,1.53mm thick, powder coating of all alluminium sections 25mm microns thick and fixing 5mm
thick plain glass in fan light and 5mm thick ground glass for shutters fitted with alluminium glazing clips and
rubber beading, powder coating of all alluminium sections 25mm microns thick including cost and conveyance to site
of powder coated aluminium sections, glass,

rubber beading , fixtures etc., including labour charges for manufacturing window, fixing in position using wooden
blocks and sheet metal screws, overheads & contractors profit etc., complete for finished item of work. (The
aluminium sections used shall be standard make confirming to IS 1948-1961 and as approved by the Engineer and
fixtures shall be of ISI marked) (1200mm x 1800mm)

Quantity analysis Size : 1.20m x 1.80m 2.16 Sqm

Quantity analysis
Window frame
bottom : (8932) 1.80m 0.909 Kgs/RM 1.636 Kgs.
sides : (8931) 2 x 1.30m 0.784 Kgs/RM 2.038 Kgs.
top : (8992) 1.80m 1.005 Kgs/RM 1.809 Kgs.
fan light sides&top(4687) 2x0.50+ 1.20+2x 0.50 0.942 Kgs/RM 2.072 Kgs.
Window shutters
bottom : (8603) 2 x 0.60m 0.641 Kgs/RM 7.69 Kgs.
plain sides & top : (8604) 2 (1.30+0.60) 0.522 Kgs/RM 1.984 Kgs.
sides inter locking : (8602) 2 x 1.30m 0.663 Kgs/RM 1.724 Kgs.
Glazing clips 2x2(0.60+0.50)+2x2x(0.60+1.30)
= 12.00 RM @ 0.101 Kgs /RM 1.212 Kgs.
20.167 Kgs.

5mm thick plain glass 1.20m x 1.80m 2.16 sqm

Rubber beading 6.00 RM

Cost analysis
A.Material :
Cost of powder coated Al. sections 20.17 Kgs. 321.00 1 Kgs. 6473.61
Cost of 5mm thick plain glass 2.16 sqm. 558.00 1 sqm. 1205.28
Cost of rubber beading 6.00 RM 2.00 1 RM 12.00
B.Labour charges 2.16 sqm 642.44 1 sqm 1387.67
Add for Screws, Nails, Nuts, Bolts etc., LS 6.00
Rate per 2.16 Sqm: 9084.56
Overheads&Contractors Profit @13.615% 0.13615 9084.56 1236.86
10321.42
Rate per 1 Sqm 4778.44
Say 4778

39 Supply and fixing of Bisonlam aluminium glazed partitions using 10mm Bisonlam and 5.00 mm thick plain
glass to full height using with Bisonlam to a height of 0.91 meter at bottom panel and remaining height with glass
and aluminium sections anodized to 12 to 15 microns and of sections of size 37mm x 62mm and 1.5mm thickness
with one meter centre to centre duly fixed with clip beading on both sides including fixing the frame to pillars by M.S.
flats, bolts and nuts including cost and conveyance of all materials including overheads & contractors profit etc.,
complete as directed during execution.

Rate as per SSR 1.00 sqm 3435.00 1 sqm 3435.00

Overheads&Contractors Profit @13.615% 0.13615 3435.00 467.68
3902.68
Rate for 1 Sqm Say 3903

40 Supplying and fixing of two shutter cupboards as per drawing with medium teak wood frames of size 75mm x
40mm and MDF Board Interior grade both sides laminated 18mm thick for shutters with 18mm x 12mm teak wood
beading alround and supplying and fixing powder coated MS fixtures 3 Nos. butt hinges of size 100mm long(for
each shutter), tower bolt 2 Nos. of 100mm x 10mm, 2 Nos of handles 100mm long and standard locking
arrangements for shutters including cost and conveyance of all materials to site, labour charges, over heads and
contractor profit etc., complete for finished item of work.
For Cup board of size 1.20m x 1.80m 2.16 sqm
 Joinery data 110

Cost of medium teak wood frame 0.0180 Cum 80094.00 1 Cum 1441.69
MDF Board Interior - BSL 18mm thick 2.16 Sqm 1021.00 1 Sqm 2205.36
Powder coated butt hinges 100mm long 6 Nos 23.00 1 Each 138.00
Powder coated tower bolts 100mm long 2 Nos 26.00 1 Each 52.00
Powder coated handles 100mm long 2 Nos 30.00 1 Each 60.00
Teak wood beading 18mm x 12mm 7.20 RM 30.00 1 RM 216.00
Cupboard locks 1 No 100.00 1 Each 100.00
Labour charges for frame work 0.0144 Cum 9692.45 1 Cum 139.57
Labour charges for shutters and fixing fixtures 2.16 Sqm 800.00 1 Sqm 1728.00
Add for MA @ 25% 0.25 1867.57 466.89
Add LS for Screws, Nails etc. 2.48
6550.00
Overheads&Contractors Profit @13.615% 0.13615 6550.00 891.78
Rate per 2.16 Sqm 7441.78
Rate per 1 Sqm 3445.27
Say 3445
 WS & SA DATA 2014-15 Page-111

COMMON SoR 2015-2016

DATA FOR WATER SUPPLY AND SANITARY ITEMS
Sl.No Description Qty Unit Rate Per Unit Amount
1 Supplying and laying, filling, jointing and testing SWG SP-1 pipe conforming to ISI 651 & 4127 with
air tight Cement joints in CM (1.5:1) prop. including excavation of trenches and socket pits in any soil
(except rock requiring blasting) and refilling with watering and tamping to the required slope including cost
and conveyance of all materials to site and all labour charges , overheads & contractor profit etc.,
complete for finished item of work (APSS NO 1301 & 1318)

a) 101.60mm dia upto 914.40mm (3') depth

Rate as per SSR 1.00 RM 408.00 1 RM 408.00
Overheads&Contractors Profit @13.615% 0.13615 408.00 55.55
Rate per 1 RM 463.55
say 464

b) 152.40mm dia upto 1524.0mm (5') depth

Rate as per SSR 1.00 RM 680.00 1 RM 680.00
Overheads&Contractors Profit @13.615% 0.13615 680.00 92.58
772.58
Rate per 1 RM say 773

c) 203.20mm dia upto 1524mm (5') depth

Cost of SWG pipe 1.00 RM 485.00 1 RM 485.00
labour charges for laying , jointing , testing 1.00 RM 288.00 1 RM 288.00
Add for MA @ 25% 0.25 288.00 72.00
845.00
Overheads&Contractors Profit @13.615% 0.13615 845.00 115.05
Rate per 1 RM 960.05
say 960

d) 254mm dia upto 1524mm (5') depth

Cost of SWG pipe 1.00 RM 888.00 1 RM 888.00
labour charges for laying, jointing, testing 1.00 RM 288.00 1 RM 288.00
Add for MA @ 25% 0.25 288.00 72.00
1248.00
Overheads&Contractors Profit @13.615% 0.13615 1248.00 169.92
Rate per 1 RM 1417.92
say 1418

e) 300mm dia upto 1524mm (5') depth

Cost of SWG pipe 1.00 RM 1280.00 1 RM 1280.00
labour charges for laying , jointing , testing 1.00 RM 288.00 1 RM 288.00
Add for MA @ 25% 0.25 288.00 72.00
1640.00
Overheads&Contractors Profit @13.615% 0.13615 1640.00 223.29
Rate per 1 RM 1863.29
say 1863

2 Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986
with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having
a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick
both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up
to a depth of 904 mm (3'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150
mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard
specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to
site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like
mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc.,
complete for finished item of work as per Standard specification.

Rate as per SSR 1 No. 6518.00 Each 6518.00

Overheads&Contractors Profit @13.615% 0.13615 6518.00 887.43
 WS & SA DATA 2014-15 Page-112

Sl.No Description Qty Unit Rate Per Unit Amount

7405.43
Rate per Each say 7405

3 Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986
with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having
a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick
both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up
to a depth of 1524 mm (5'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150
mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard
specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to
site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like
mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc.,
complete for finished item of work as per Standard specification.

Rate as per SSR 1 No. 10181.00 Each 10181.00

Overheads&Contractors Profit @13.615% 0.13615 10181.00 1386.14
11567.14
Rate per Each say 11567

4 Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber
upto 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of
20 Kg including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of
seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement
mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for
finished item of work as per Standard specification.

Rate as per SSR 1 No. 3825.00 Each 3825.00

Overheads&Contractors Profit @13.615% 0.13615 3825.00 520.77
4345.77
Rate per Each say 4346

5 Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make confirming to IS 651 & 4127
with C.I grating & constructing cement brick masonry in CM (1:6) prop., intermediate chamber and fitted
with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of standard make as approved including
cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete
for finished item of work.

Rate as per SSR 1 No. 568.00 1 Each 568.00

Deduct cost of CI frame and cover 1 No. 124.00 1 No. -124.00
Add for RCC Cover 1 No. 100.00 1 No. 100.00
544.00
Overheads&Contractors Profit @13.615% 0.13615 544.00 74.07
618.07
Rate per Each say 618

6 Supplying and fixing of 3" (76.2mm) multi floor trap with jali - UPVC/SWR pipe fittings as per site
requirements with standard practice for all floors including cost and conveyance of all materials to site,
labour charges , overheads & contractors profit etc., complete for finished item of work.

Rate as per SSR 1 No. 102.00 1 Each 102.00

Overheads&Contractors Profit @13.615% 0.13615 102.00 13.89
115.89
Rate per Each say 116

7 Supplying and fixing of 4" (101.6mm) multi floor trap with jali - UPVC/SWR pipe fittings as per site
requirements with standard practice for all floors including cost and conveyance of all materials to site,
labour charges , overheads & contractors profit etc., complete for finished item of work.

Rate as per SSR 1 No. 144.00 1 Each 144.00

Overheads&Contractors Profit @13.615% 0.13615 144.00 19.61
163.61
Rate per Each say 164
 WS & SA DATA 2014-15 Page-113

Sl.No Description Qty Unit Rate Per Unit Amount

8 Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI
marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap, ISI marked and providing masonry seat,
CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed
on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as
approved by Engineer-in-charge, angle stop cock 12.70mm dia. first quality Indian make heavy duty,
12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S
trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at
the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour
charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of work.

Cost of Orissa pan 1 No. 1584.00 1 Each 1584.00

Add MA on labour charges for fixing Orissa
pan 0.25 377.00 94.25
Cost of Brick masonry seat 1 No. 328.00 1 Each 328.00
Cost of C C squatting plate 1 No. 98.00 1 Each 98.00
Cost of slim line PVC flush tank 10 Ltrs.
capacity single flush 1 No. 1455.00 1 Each 1455.00
Angle stop cock 12.70mm 1 No. 474.00 1 Each 474.00
Add MA on labour charges for fixing angle
stop cock 0.25 43.00 10.75
12.70mm PVC connection with brass union
nuts 1 No. 102.00 1 Each 102.00
Add MA on labour charges for fixing PVC
connection with brass union nuts 0.25 20.00 5.00
31.75mm brass plumber union 1 No. 69.00 1 Each 69.00
Add MA on labour charges for fixing 31.75mm
brass plumber union 0.25 14.00 3.50
Cutting holes in brick masonry 1 No. 47.00 1 Each 47.00
Add MA on labour charges for cutting holes in
brick masonry 0.25 47.00 11.75
Teak wood blocks 76.2mm x 101.6mm 2 Nos. 26.00 1 Each 52.00
Add MA on labour charges for fixing Teak
wood blocks 0.25 9.00 2.25
4336.50
Overheads&Contractors Profit @13.615% 0.13615 4336.50 590.41
4926.91
Rate per Each 4927
 WS & SA DATA 2014-15 Page-114

Sl.No Description Qty Unit Rate Per Unit Amount

9 Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white
glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets
with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level
cistern with internal components and fixed using required size of nails and screws, angle stop cock
12.70mm dia. first quality Indian make heavy duty, 12mm PVC connections with brass union nuts CP
coated including cost and conveyance of all materials to site, overheads & contractors profit etc., complete
for finished item of work for all floors.

Cost of EWC with 'S' trap 1 No 1964.00 1 Each 1964.00

Add MA on labour charges for fixing EWC 0.25 264.00 66.00
Supply and fixing of 10 lts. Capacity lowdown
PVC flushing tank 1 No 1455.00 1 Each 1455.00
Plastic seat and lid for European Water Closet
and rubber buffers 1 No 891.00 1 Each 891.00
Add MA on labour charges for fixing Plastic
seat and lid for EWC and rubber buffers 0.25 76.00 19.00
Angle stop cock 12.70mm 1 No. 474.00 1 Each 474.00
Add MA on labour charges for fixing angle
stop cock 0.25 43.00 10.75
12.70mm dia PVC connection with brass
union nuts 1 No 102.00 1 Each 102.00
Add MA on labour charges for fixing PVC
connection with brass union nuts 0.25 20.00 5.00
Cutting holes in brick masonry 1 No. 47.00 1 Each 47.00
Add MA on labour charges for cutting holes in
brick masonry 0.25 47.00 11.75
Cost of 76.2 x 101.60 mm teakwood blocks
2 Nos 26.00 1 Each 52.00
Add MA on labour charges for fixing Teak
wood blocks 0.25 9.00 2.25
5099.75
Overheads&Contractors Profit @13.615% 0.13615 5099.75 694.33
5794.08
Rate per Each 5794

10 Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-
4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread
conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality
Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm
PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make
heavy duty, 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and
conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of
work
Cost of Wash hand basin 1 No. 1782.00 1 Each 1782.00
Add MA on labour charges for fixing Wash
hand basin 0.25 377.00 94.25
Angle stop cock 12.70mm 1 No. 474.00 1 Each 474.00
Add MA on labour charges for fixing angle
stop cock 0.25 43.00 10.75
12.70mm PVC connection with brass union
nuts 1 No. 102.00 1 Each 102.00
Add MA on labour charges for fixing PVC
connection with brass union nuts 0.25 20.00 5.00
Deduct cost of NP chain and rubber plug 1 No. 42.00 1 Each -42.00
31.75mm dia. PVC flexible waste pipe 1 No. 26.00 1 Each 26.00
2452.00
Overheads&Contractors Profit @13.615% 0.13615 2452.00 333.84
2785.84
Rate per Each say 2786
 WS & SA DATA 2014-15 Page-115

Sl.No Description Qty Unit Rate Per Unit Amount

11 Supplying and fixing NP soap dish heavy type of approved make ISI quality with NP screws etc.,
complete including cost and conveyance of all materials, labour charges for fixing , overheads &
contractors profit for finished item of work in all floors

Cost of NP soap dish 1 No. 243.00 1 Each 243.00

Add for MA @ 25% 0.25 12.00 3.00
246.00
Overheads&Contractors Profit @13.615% 0.13615 246.00 33.49
279.49
Rate per Each say 279

12 Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back
with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads &
contractors profit for finished item of work in all floors.

Rate as per SSR 1 No. 513.00 Each 513.00

Add for MA @ 25% 0.25 116.00 29.00
542.00
Overheads&Contractors Profit @13.615% 0.13615 542.00 73.79
615.79
Rate per Each say 616

13 Supplying and fixing of 25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets
and aluminium screws including cost and conveyance of all materials, labour charges , overheads &
contractors profit for finished item of work.

Rate as per SSR 1 No. 164.00 Each 164.00

Add for MA @ 25% 0.25 44.00 11.00
175.00
Overheads&Contractors Profit @13.615% 0.13615 175.00 23.83
198.83
Rate per Each say 199

14 Supplying and fixing steel surgical long elbow action handle 12.7mm dia bib cock as approved by
the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads &
contractors profit complete for finished item of work in all floors.

Rate as per SSR 1 No. 990.00 Each 990.00

Overheads&Contractors Profit @13.615% 0.13615 990.00 134.79
1124.79
Rate per Each say 1125

15 Supplying and fixing NP bib taps of size 12.70mm dia of Indian make heavy duty as approved by
the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads &
contractors profit complete for finished item of work in all floors.

Rate as per SSR 1 No. 258.00 Each 258.00

Add for MA @ 25% 0.25 29.00 7.25
265.25
Overheads&Contractors Profit @13.615% 0.13615 265.25 36.11
301.36
Rate per Each say 301

16 Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4
Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double
junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay
nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit
complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)

a) 75mm dia
 WS & SA DATA 2014-15 Page-116

Sl.No Description Qty Unit Rate Per Unit Amount

Data for 6 RM
Cost of 75mm dia pipe 6.00 RM 255.00 3 RM 510.00
Cost of PVC clamps 3 Nos. 15.00 Each 45.00
Labour charges 6.00 RM 70.00 1 RM 420.00
975.00
Rate per 1 RM 162.50
Overheads&Contractors Profit @13.615% 0.13615 162.50 22.12
184.62
say 185

b) 90mm dia
Data for 6 RM
Cost of 90mm dia pipe 6.00 RM 405.00 3 RM 810.00
Cost of PVC clamps 3 Nos. 17.00 Each 51.00
Labour charges 6 RM 70.00 1 RM 420.00
1281.00
Rate per 1 RM 213.50
Overheads&Contractors Profit @13.615% 0.13615 213.50 29.07
242.57
say 243

c) 110mm dia
Data for 6 RM
Cost of 110mm dia pipe 6.00 RM 484.00 3 RM 968.00
Cost of PVC clamps 3 Nos. 18.00 Each 54.00
Labour charges 6 RM 70.00 1 RM 420.00
1442.00
Rate per 1 RM 240.33
Overheads&Contractors Profit @13.615% 0.13615 240.33 32.72
273.05
say 273

d) 160mm dia
Data for 6 RM
Cost of 160mm dia pipe 6.00 RM 1153.00 3 RM 2306.00
Cost of PVC clamps 3 Nos. 35.00 Each 105.00
Labour charges 6 RM 70.00 1 RM 420.00
2831.00
Rate per 1 RM 471.83
Overheads&Contractors Profit @13.615% 0.13615 471.83 64.24
536.07
say 536
 WS & SA DATA 2014-15 Page-117

Sl.No Description Qty Unit Rate Per Unit Amount

17 Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR
13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2")
for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour
charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.

a) 15.90mm OD pipe
Rate as per SoR 1 No. 141.00 Each 141.00
Overheads&Contractors Profit @13.615% 0.13615 141.00 19.20
Rate per 1 RM 160.20
say 160

b) 22.20mm OD pipe
Rate as per SoR 1 No. 160.00 Each 160.00
Overheads&Contractors Profit @13.615% 0.13615 160.00 21.78
Rate per 1 RM 181.78
say 182

c) 28.60mm OD pipe
Rate as per SoR 1 No. 212.00 Each 212.00
Overheads&Contractors Profit @13.615% 0.13615 212.00 28.86
Rate per 1 RM 240.86
say 241

d) 34.90mm OD pipe
Rate as per SoR 1 No. 289.00 Each 289.00
Overheads&Contractors Profit @13.615% 0.13615 289.00 39.35
Rate per 1 RM 328.35
say 328

e) 41.30mm OD pipe
Rate as per SoR 1 No. 360.00 Each 360.00
Overheads&Contractors Profit @13.615% 0.13615 360.00 49.01
Rate per 1 RM 409.01
say 409

f) 54.00mm OD pipe
Rate as per SoR 1 No. 525.00 Each 525.00
Overheads&Contractors Profit @13.615% 0.13615 525.00 71.48
Rate per 1 RM 596.48
say 596

18 Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR
11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for
hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges
for fixing, overheads & contractors profit complete for finished item of work at all floor levels.

a) 15.90mm OD pipe
Rate as per SoR 1 No. 156.00 Each 156.00
Overheads&Contractors Profit @13.615% 0.13615 156.00 21.24
Rate per 1 RM 177.24
say 177

b) 22.20mm OD pipe
Rate as per SoR 1 No. 189.00 Each 189.00
Overheads&Contractors Profit @13.615% 0.13615 189.00 25.73
Rate per 1 RM 214.73
say 215

c) 28.60mm OD pipe
 WS & SA DATA 2014-15 Page-118

Sl.No Description Qty Unit Rate Per Unit Amount

Rate as per SoR 1 No. 227.00 Each 227.00
Overheads&Contractors Profit @13.615% 0.13615 227.00 30.91
Rate per 1 RM 257.91
say 258

d) 34.90mm OD pipe
Rate as per SoR 1 No. 310.00 Each 310.00
Overheads&Contractors Profit @13.615% 0.13615 310.00 42.21
Rate per 1 RM 352.21
say 352

e) 41.30mm OD pipe
Rate as per SoR 1 No. 383.00 Each 383.00
Overheads&Contractors Profit @13.615% 0.13615 383.00 52.15
Rate per 1 RM 435.15
say 435

f) 54.00mm OD pipe
Rate as per SoR 1 No. 560.00 Each 560.00
Overheads&Contractors Profit @13.615% 0.13615 560.00 76.24
Rate per 1 RM 636.24
say 636

19 Supplying & fixing GI pipe Medium Grade properties & weight as per IS 1239 ISI mark in ground or
on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions
etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chiselling
masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW
blocks on walls including cost and conveyance of all materials and labour charges , overheads &
contractors profit complete for finished item of work.

a) 15mm Nominal bore

Rate as per SSR 1.00 RM 204.00 1 RM 204.00
Add for MA @ 25% 0.25 41.00 10.25
214.25
Overheads&Contractors Profit @13.615% 0.13615 214.25 29.17
243.42
Rate per 1 RM say 243

b) 20mm Nominal bore

Rate as per SSR 1.00 RM 227.00 1 RM 227.00
Add for MA @ 25% 0.25 41.00 10.25
237.25
Overheads&Contractors Profit @13.615% 0.13615 237.25 32.30
269.55
Rate per 1 RM say 270

c) 25mm Nominal bore

Rate as per SSR 1.00 RM 297.00 1 RM 297.00
Add for MA @ 25% 0.25 41.00 10.25
307.25
Overheads&Contractors Profit @13.615% 0.13615 307.25 41.83
349.08
Rate per 1 RM say 349
 WS & SA DATA 2014-15 Page-119

Sl.No Description Qty Unit Rate Per Unit Amount

d) 32mm Nominal bore
Rate as per SSR 1.00 RM 417.00 1 RM 417.00
Add for MA @ 25% 0.25 41.00 10.25
427.25
Overheads&Contractors Profit @13.615% 0.13615 427.25 58.17
485.42
Rate per 1 RM say 485

e) 40mm Nominal bore

Rate as per SSR 1.00 RM 466.00 1 RM 466.00
Add for MA @ 25% 0.25 44.00 11.00
477.00
Overheads&Contractors Profit @13.615% 0.13615 477.00 64.94
541.94
Rate per 1 RM say 542

f) 50mm Nominal bore

Rate as per SSR 1.00 RM 503.00 1 RM 503.00
Add for MA @ 25% 0.25 67.00 16.75
519.75
Overheads&Contractors Profit @13.615% 0.13615 519.75 70.76
590.51
Rate per 1 RM say 591

20 Supplying and fixing 65 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS
1239 in ground or on wall with GI fittings such as elbows tees couplings, nipples, plugs including
excavation for trenches and refilling the trenches ,chiselling masonry walls and making good the walls &
floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance
of all materials and labour charges , overheads & contractors profit complete for finished item of work
except for GI bends union and GI connectors with checkout and socket Tata or Zenith make or equivalent

Rate as per SSR 1.00 RM 892.00 1 RM 892.00

Overheads&Contractors Profit @13.615% 0.13615 892.00 121.45
1013.45
Rate per 1 RM say 1013

21 Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heavy
type including cost and conveyance of all materials , labour charges , overheads & contractors profit
complete for finished item of work.

a) 15mm Nominal bore

Rate as per SSR 1 No. 636.00 Each 636.00
Add for MA @ 25% 0.25 44.00 11.00
647.00
Overheads&Contractors Profit @13.615% 0.13615 647.00 88.09
735.09
Rate per Each say 735

b) 20mm Nominal bore

Rate as per SSR 1 No. 858.00 Each 858.00
Add for MA @ 25% 0.25 44.00 11.00
869.00
Overheads&Contractors Profit @13.615% 0.13615 869.00 118.31
987.31
Rate per Each say 987
 WS & SA DATA 2014-15 Page-120

Sl.No Description Qty Unit Rate Per Unit Amount

c) 25mm Nominal bore
Rate as per SSR 1 No. 1233.00 Each 1233.00
Add for MA @ 25% 0.25 44.00 11.00
1244.00
Overheads&Contractors Profit @13.615% 0.13615 1244.00 169.37
1413.37
Rate per Each say 1413

d) 32mm Nominal bore

Rate as per SSR 1 No. 1875.00 Each 1875.00
Add for MA @ 25% 0.25 44.00 11.00
1886.00
Overheads&Contractors Profit @13.615% 0.13615 1886.00 256.78
2142.78
Rate per Each say 2143

e) 40mm Nominal bore

Rate as per SSR 1 No. 2533.00 Each 2533.00
Add for MA @ 25% 0.25 67.00 16.75
2549.75
Overheads&Contractors Profit @13.615% 0.13615 2549.75 347.15
2896.90
Rate per Each say 2897

f) 50mm Nominal bore

Rate as per SSR 1 No. 3711.00 Each 3711.00
Add for MA @ 25% 0.25 90.00 22.50
3733.50
Overheads&Contractors Profit @13.615% 0.13615 3733.50 508.32
4241.82
Rate per Each say 4242

g) 65mm Nominal bore

Rate as per SSR 1 No. 5730.00 Each 5730.00
Add for MA @ 25% 0.25 112.00 28.00
5758.00
Overheads&Contractors Profit @13.615% 0.13615 5758.00 783.95
6541.95
Rate per Each say 6542

h) 80mm Nominal bore

Rate as per SSR 1 No. 8494.00 Each 8494.00
Add for MA @ 25% 0.25 133.00 33.25
8527.25
Overheads&Contractors Profit @13.615% 0.13615 8527.25 1160.99
9688.24
Rate per Each say 9688
 WS & SA DATA 2014-15 Page-121

Sl.No Description Qty Unit Rate Per Unit Amount

22 Providing and placing on terrace (at all floor levels)polyetheylene water storage tank with double
layer approved brand and manufacture with cover and suitable locking arrangement and making
necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks
including cost and conveyance of all materials and labour charges , overheads & contractors profit
complete for finished item of work.

Rate as per SSR 1 Ltr 6.00 1 Ltr 6.00

Add for MA @ 25% 0.25 1.00 0.25
6.25
Overheads&Contractors Profit @13.615% 0.13615 6.25 0.85
Rate per 1 Ltr 7.10

23 Supplying and fixing of stainless steel sink of size 508.00mm x 457.2mm x 203.20mm, 1mm thick of
Indian make fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 31.75
mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall
and making good & restoring to original surfaces , overheads & contractors profit complete for finished
item of work in all floors

Rate as per SSR 1 No 5396.00 Each 5396.00

Add for MA @ 25% 0.25 449.00 112.25
5508.25
Overheads&Contractors Profit @13.615% 0.13615 5508.25 749.95
6258.20
Rate per Each say 6258

23 Supplying and fixing of stainless steel sink of size 914.4 mm x457.2mm, 1mm thick of Indian make
fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 31.75 mm dia PVC
flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making
good & restoring to original surfaces overheads & contractors profit complete.for finished item of work in
all floors.

Rate as per SSR 1 No 7552.00 Each 7552.00

Add for MA @ 25% 0.25 506.00 126.50
7678.50
Overheads&Contractors Profit @13.615% 0.13615 7678.50 1045.43
8723.93
Rate per Each say 8724

24 Supplying and fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with
integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-
1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass
plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 31.75 mm dia PVC
flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site,
labour charges , overheads & contractors profit complete for finished item of work for all floors.

Rate as per SSR 1 No 930.00 Each 930.00

Add for MA @ 25% 0.25 150.00 37.50
12.7mm PVC connections with brass plumber
union nuts 1 No 102.00 Each 102.00
Add for MA @ 25% 0.25 20.00 5.00
12.70mm NP push cock 1 No 271.00 Each 271.00
31.75mm dia. PVC flexible waste pipe 1 No 26.00 Each 26.00
1371.50
Overheads&Contractors Profit @13.615% 0.13615 1371.50 186.73
1558.23
Rate per Each Say 1558
 WS & SA DATA 2014-15 Page-122

Sl.No Description Qty Unit Rate Per Unit Amount

25 Supplying and fixing white glazed flat back half stall urinals of size 590 mm x 375 mm x 390 mm
with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to
IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection
with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 31.75 mm
dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all
materials to site, labour charges etc., overheads & contractors profit complete for finished item of work for
all floors.
Rate as per SSR 1 No 3100.00 Each 3100.00
Add for MA @ 25% 0.25 150.00 37.50
12.7mm PVC connections with brass plumber
union nuts 1 No 102.00 Each 102.00
Add for MA @ 25% 0.25 20.00 5.00
12.70mm NP push cock 1 No 271.00 Each 271.00
31.75mm dia. PVC flexible waste pipe 1 No 26.00 Each 26.00
3541.50
Overheads&Contractors Profit @13.615% 0.13615 3541.50 482.18
4023.68
Rate per Each Say 4024

26 Supplying and fixing of 16mm to 20 mm thick polished marble slab partitioins of size 4' 0" x 2' 0"
for urinals including full rounding the edges , fixing in position, polishing, including cost and conveyance
of all materials and labour charges , overheads & contractors profit complete for finished item of work for
all floors.

Rate as per SSR 0.72 Sqm 1001.97 1 Sqm 721.42

Chiselling the brick masonry wall 1.20 RM 30.00 1 RM 36.00
Add for MA @ 25% 0.25 36.00 9.00
Rounding the edges of marble 2.40 RM 374.00 1 RM 897.60
Labour charges for fixing ( dadooing labour
charges ) 0.72 Sqm 579.40 10 Sqm 41.72
Add for MA @ 25% 0.25 41.72 10.43
1716.16
Overheads&Contractors Profit @13.615% 0.13615 1716.16 233.66
1949.82
Rate per Each Say 1950

27 Supplying and fixing of 101.60mm x 609.60mm white glazed porcelain channels 1st quality fixed in
brick masonry to the required slopes , white cement pointing including cost and conveyance of all
materials and labour charges , overheads & contractors profit complete for finished item of work for all
floors.
Rate as per SSR 1 No 545.00 1 Each 545.00
Rate for 1 RM (1/0.6096) 545.00 894.03
Overheads&Contractors Profit @13.615% 0.13615 894.03 121.72
1015.75
Say 1016

28 Construction of brick masonry support for GI pipe of size 304.80mm x 228.60mm x 228.60 mm in
CM (1:8) prop including plastering and finishing with 12mm thick in CM (1:5) including cost and
conveyance of all materials and all labour charges, overheads & contractors profit complete for finished
item of work for all floors.

Rate as per SSR 1 No 76.00 1 Each 76.00

Add for MA @ 25% 0.25 22.00 5.50
81.50
Overheads&Contractors Profit @13.615% 0.13615 81.50 11.10
92.60
Rate per Each Say 93