Scribd
Upload
41 views

X-431 V Series: Launch

1. The document provides instructions for registering and downloading diagnostic software onto the X-431 V Series diagnostic tool. 2. To register, the user launches the application, creates an account, inputs the product serial number and activation code found in the included envelope to activate the connector. 3. To download software, the user taps to enter the download screen and then taps again to start downloading diagnostic software packages for vehicles. The software will install automatically once downloaded.

Uploaded by

engr Malik
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
41 views

X-431 V Series: Launch

1. The document provides instructions for registering and downloading diagnostic software onto the X-431 V Series diagnostic tool. 2. To register, the user launches the application, creates an account, inputs the product serial number and activation code found in the included envelope to activate the connector. 3. To download software, the user taps to enter the download screen and then taps again to start downloading diagnostic software packages for vehicles. The software will install automatically once downloaded.

Uploaded by

engr Malik
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

X-431 V Series Quick Start Guide (EN) LAUNCH

Diagnostic Connector 4 Register and Download Software


Note: Remember to remove the
diagnostic connector from the DLC 1. Register (1. Tap “Login” --> 2. Register an Account --> 3. Activate Connector
OBD II 16 PIN connector if it keeps unattended. --> 4. Finish Register)

1. Launch the X-431 V/X-431 V+ application


Communication indicator on the desktop to enter.
Tap on “LOGIN” on the right upper corner
Power indicator of the screen.

Micro USB port NEAR CENTER


OF DASH DLC Location A
Install the diagnostic connector
1. Locate vehicle’s DLC socket: It provides standard 16 pins and is generally located on
driver’s side, about 12 inch away from the center of dashboard. See Figure DLC
Location. If DLC is not equipped under dashboard, a label indicating its position will 2. Tap on “New Register” in Figure B, input the information (items with * must
be given. In case no DLC is found, please refer to Automobile Repair Manual; be filled) and then tap on “Register”. Refer to Figure C.
2. Plug the connector into the vehicle's DLC(It is suggested to use the OBD II extension 3. Input the Product S/N and Activation Code (can be obtained from the
password envelope), and then tap on “Activate”. Refer to Figure D.
cable to connect the DLC and the connector). For vehicles with non-16PIN DLC,
please choose the desired connector. Normally the power indicator of diagnostic
connector will light up. The Product S/N
and Activation Code Product S/N
in the Password
1 Charge X-431 V Envelope are shown
Activation
as right figure. code
1. Insert the included USB cable into the charger. Plug the adaptor into AC outlet.
2. Connect the other end of USB cable to X-431 V/X-431 V+.
3. Once the battery is fully charged, disconnect the power adaptor from the AC
outlet.

2 Power On

Press the [POWER] button on the X-431 V/X-431 V+ , the system starts initializing
and then enters the desktop.

C
3 Wi-Fi Connection
Tap “Skip” to jump to the main
1. Tap [Settings] on the desktop and then [Wi-Fi] to configure Wi-Fi setting. B menu screen. In this case, you
2. Select the desired Wi-Fi connection from the list. (Password may be required for can activate it in “Profile” -->
secured networks). “Activate Connector”.
When “Connected” appears, tap to return to the desktop.
(To be continued...)
X-431 V Series Quick Start Guide (EN) LAUNCH

4 Register and Download Software (Cont.) 5 Vehicle Connections

OBD II Vehicle Connection


4. Tap on “OK” to enter diagnostic software download screen. Refer to Figure
E.
A Directly plug the diagnostic connector into vehicle’s DLC
OBD II Extension
B Using OBD II extension cable Cable

To diagnostic
connector

To Vehicle’s DLC

D Non-OBD II Vehicle Connection

A Via Cigarette Lighter

Tap “Yes” to enter


diagnostic software
download page.

2. Download the diagnostic software


B Via Battery Clamps Cable
In Figure E, tap to start downloading.
During downloading, please make sure that the Wi-Fi has a stable and strong
signals.
Note: By default, all vehicle software are selected. To deselect certain software, just
uncheck the box next to the software version.
Once downloading finished, the software packages will be installed
automatically.
Note: All software are updated from time to time. To enjoy more better service and
functions, you are strongly suggested to keep synchronized with the latest version.

Pictures illustrated here are for reference only and this Quick Start Guide is subject to change without notice. For more detailed operations, please refer to the User’s Manual of X-431 V/X-431 V+.

You might also like