Opper Time Opper Time Domain Reflectometer Domain Reflectometer
Opper Time Opper Time Domain Reflectometer Domain Reflectometer
Suitable for use on Coaxial, Telephone, CATV, CCTV, Power cable & UTP cable etc.
Maximum range: 3.2m~20,000m (10.4ft~65,000ft) for Coaxial cables
*Maximum testable cable length will vary with pulse width and cable type
Two active cursors with individual control
Changeable zero point
Ease of use : single key functions
Non-volatile memory for storing measurement data up to 100 waveform
Built-in library of 77 cables for fast & easy selection of VOP
Usable battery time display
Waveform zoom capabilities
Waveform trace and diagnosis
Automatic event search
Low power consumption
Efficient power management
Windows S/W : NanoWave™
Rugged and waterproof packing
Optional spare battery double operating time
CE & FCC certified
Copper time
Domain Reflectometer (Model No: mTDR-070)
Measurement range 3.2 m ~ 20,000 m (10.4 ft ~ 65,000 ft) for Coaxial cables
*Maximum testable cable length will vary with pulse width and cable type
Maximum display resolution 10 cm (Variable up to 50 m)
Accuracy ±0.1% of reading ±0.1 m for Coaxial cables
*Accuracy will vary with VOP of cable being tested
Test mode L1, L1&M, L1-M, M
Pulse width 5, 15, 45, 100, 200, 500, 1,000, 2,000, 5,000, 10,000 (ns)
Display 320 x 240 pixel back-lit LCD
Maximum storage capacity 100 waveforms
Internal memory 256 Kbytes
Communication port RS-232C compatible (1 start bit, 8 data bits, 1 stop bit and no parity and 38,400 baud rate)
Input bandwidth 300 MHz
Effective sampling rate 1 GS/s
Gain 0 to 66 dB or better, maximum sensitivity 1mV (full scale)
Screen update rate Maximum 3 times per second
VOP (PVF) Variable from 30.0 to 99.9% (in 0.1% step)
V : 90 to 300 m/㎲
V/2 : 45 to 150 m/㎲
Battery 12 V Nickel metal hydride battery pack 4,000mAh
Adaptor DC 15 V, 1 A
Input protection 250 V AC 60 Hz
Connector BNC female
Operating time 6 hours
Recharge time 4 hours
Width 247 mm(9.7")
Depth 127 mm(5")
Height 267 mm(10.5")
Net weight 3.3 kg (7.2 lbs)
Operating temperature -15℃(+5℉)~ +55℃(131℉)
Storage temperature -20℃(-4℉) ~ +70℃(158℉)
Humidity < 95%
* Except where otherwise stated, this specification applies at an ambient temperature of 20°C(68°F).
*
NanoTronix Copper time Domain Reflectometer (Model No.: mTDR-070) has been using in many industrial sites such
as Telephone company, ISP, CATV company, HFC network maintenance company, LAN installer or maintenance
company, Power plant company, Chemical company, Ship-builder, Military communication unit, Large-sized factory
and Subway station wherever any kinds of metallic cables are installed and need to be maintained.
Coaxial cables network maintenance
CATV and CCTV network maintenance
Electric power cable maintenance
Telephony network maintenance
Security cable maintenance
LAN network maintenance
NanoTronix Co.,Ltd.
5Fl., Sehwa Bldg., 66-9, Nonhyeon-dong, Gangnam-gu, Seoul 135-010, Korea Tel: +82-2-3444-7755 Fax: +82-2-3446-9900
www.nano-tronix.com e-mail: [email protected]
To find any problem on the
To find any problem on the To identify alive cable modem power, telephone or UTP cable
telephone line in the wall, ceiling users without visiting each in the wall or ceiling in the
or underground home in the CATV network subway or railway stations etc..
To find any problem on the To find any problem on the To find any problem on the
power, telephone or UTP cable emergency telephone line or emergency telephone line,
in the wall or ceiling at the power cable installed in the heating cable or power cable
airport building etc. bridge or highway etc.. installed in the tunnel etc..