Scribd
Upload
152 views3 pages

Battery Voltage Sensor BVS 1930

The BVS 1930 Battery Voltage Sensor monitors battery voltages between 10-40 VDC. It has an adjustable pickup point and LED indicator. When the battery voltage reaches the setpoint, the LED and relay contact energize. It has a time delay on dropout to prevent false readings from engine cranking voltage dips. It is designed to monitor starter batteries on vehicles.

Uploaded by

AjitKumarPandey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
152 views3 pages

Battery Voltage Sensor BVS 1930

The BVS 1930 Battery Voltage Sensor monitors battery voltages between 10-40 VDC. It has an adjustable pickup point and LED indicator. When the battery voltage reaches the setpoint, the LED and relay contact energize. It has a time delay on dropout to prevent false readings from engine cranking voltage dips. It is designed to monitor starter batteries on vehicles.

Uploaded by

AjitKumarPandey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

Battery Voltage Sensor BVS 1930

Code: BVS 1930

Description:
The BVS 1930 Battery Voltage Sensor is specifically designed to monitor any
battery system from 10 VDC to 40 VDC. An output relay with form-C contact is
provided for connection to external circuitry. An LED is visible at the top of the
sensor's case to provide instant recognition of status. The relay and LED both
energize at the setpoint on increasing voltage. The delay on dropout is ideally
suited to override engine cranking voltage dips on starter batteries.

Features:
 Adjustable Pickup 10-40 VDC
 Solid state sensing circuitry
 Ultra stable, temperature compensated
 L.E.D. indicator
 Plug in package (8 pin octal)
 High resolution 10 turn adjustment pot
 Two amp form C output contact (CSA)
 Proportional time delay on dropout
 Quality Assurance System ISO
9001:2000

Battery Monitors
THREE VOLT LOW BATTERY VOLTAGE FLASHER (9)
Products (undervol) This circuit is designed to monitor two alkaline cells
(3v) that form the battery often used in portable electronic
equipment.  It use an inexpensive IC from Panasonic that is
Sitemap connected to an efficient LED flashing circuit.  When the
battery voltage drops below a certain point the circuit flashes
the LED.  In the off state the circuit draws only 1uA, while in
Online the active flashing state it draws 20uA.   Published in EDN, Jan
Calculators 2, 1997
12 Volt Lead Acid Battery Monitor: This simple circuit makes
it possible to monitor the charging process to a higher level.
Circuits (A- 12B Battery Condition Indicator:
C) Battery condition indicator12v :

Battery Monitor in MultipleCell Applications: Maxim APP 405:


Circuits (D- May 04, 2001 / The DS2760 and DS2761 battery monitor
O) and protector are battery management ICs geared mainly for
single-cell Li-Ion battery pack applications. Although
designed mainly for use in the single cell applications, these
Circuits (P- devices can be used in multiple-cell applications. This
Z) application note demonstrates to the user how to use the
DS2760 or DS2761 in a multiple-cell application including
necessary circuit modifications and limitations in functionality
Tutorials of the devices in the multiple-cell environment. An example
circuit is shown along with recommended device
configuration of the DS2760 or DS2761 battery monitors.
Circuit Prevents Deep Discharge of Batteries: 09/26/96 EDN
Design Ideas to avoid the deep discharge that can destroy or
shorten the life of a rechargeable Battery, you must
disconnect its Load before the discharge is complete
Circuit Protects Battery From Overdischarge: 04/12/01 EDN-
Design Ideas /  PDF contains multiple circuits - scroll to find
the one of interest / In some applications, it is undesirable to
Overdischarge the battery, because it could irreversibly
reduce the batterys capacity and the number of
discharge/charge cycles. This circuit protects a single NiMH
(nickel-metal-hydride) cell by disconnecting the load from
the battery when it gets discharged enough.
LED Flasher indicates Low Battery Condition: 01/02/97 EDN
Design Ideas
Low battery indicator uses fleapower : 09/04/03  EDN-Design
Ideas / It is always desirable to use a low-battery indicator
that consumes as little power as possible. For a 9V, 450-
mAhr alkaline battery, a 50-µA low-battery indicator can by
itself run the battery down in a little more than a year.
Battery-powered devices that need to run continuously for a
long time require battery indicators that consume minimal
power....
Low Battery Voltage Cutoff Consumes just 1 MA: 09/11/98
EDN Design Ideas
MicroAmps Monitor Dual Supply Batteries: 03/03/98 EDN
Design Ideas / to Low Power Circuit monitors two 9V
Batteries in a dual Supply configuration and turns on the
Battery Low LED if either Battery Voltage drops below its
limit
Overload & Reverse Current Circuitry Protects Battery & Load:
03/01/96 EDN Design Ideas / There are numerous Circuits
can protect against backward installation of Batteries and
other Overcurrent causing conditions
Phantom Power Battery Test Circuit: LED will light when
battery is over42 volts
Simple Circuit Disconnects Load From Battery: 03/14/96 EDN
Design Ideas
Simple Circuit Monitors Battery Voltage: 11/11/96 EDN
Design Ideas
Simple Circuit Safely Deepdischarges NiCd Battery: 04/29/99
EDN-Design Ideas  5/03) PDF contains multiple circuits -
scroll to find this circuit
Solar Car Battery Monitor Schematic:
Voltage Monitor Prevents Deep Discharge of Battery:
05/07/98 EDN Design Ideas

You might also like