Scribd
Upload
635 views

Min Gasket Width Calculation

The document provides a calculation for minimum gasket width based on total bolt area, bolt allowable stress, gasket design seating stress, gasket outer diameter, and gasket inner diameter. Plugging the values provided into the formula, the minimum calculated gasket width is 57.03 mm.

Uploaded by

Hunnymijie Nor
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
635 views

Min Gasket Width Calculation

The document provides a calculation for minimum gasket width based on total bolt area, bolt allowable stress, gasket design seating stress, gasket outer diameter, and gasket inner diameter. Plugging the values provided into the formula, the minimum calculated gasket width is 57.03 mm.

Uploaded by

Hunnymijie Nor
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Minimum gasket width calculation

(Brownell Young)
Ab = Total bolt area = 3581.722 cm2
Sa = bolt allowable stress = 181.34 N/mm2
y = Gasket design seating stress = 69.64 N/mm2
pi = 3.142 = 3.14
Go = Gasket OD = 2663 mm
Gi = Gasket ID = 2543 mm
Data taken from PVE report
Formula

Minimum gasket width = Ab*Sa/y*pi*(Go+Gi) = 57.03 mm

You might also like