Scribd
Upload
124 views7 pages

C18 Industrial Engine WRH00001-UP (SEBP3816 - 85)

The document provides instructions for removing the front gear group from a C18 industrial engine. It lists the required tools and presents 15 steps for removal, including removing mounting bolts and plates to access the gears, idler gears, and cluster gear assembly. Sleeve bearings and seals must also be removed from various components. Precautions are noted to mark gear orientations and adjust backlash during reassembly.

Uploaded by

Miguel Angel Garrido Cardenas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
124 views7 pages

C18 Industrial Engine WRH00001-UP (SEBP3816 - 85)

The document provides instructions for removing the front gear group from a C18 industrial engine. It lists the required tools and presents 15 steps for removal, including removing mounting bolts and plates to access the gears, idler gears, and cluster gear assembly. Sleeve bearings and seals must also be removed from various components. Precautions are noted to mark gear orientations and adjust backlash during reassembly.

Uploaded by

Miguel Angel Garrido Cardenas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

30/12/2020 C18 Industrial Engine WRH00001-UP(SEBP3816 - 85) - Documentación

Pantalla anterior
Bienvenido: pvaldez
Producto: INDUSTR IAL ENGINE
Mode lo: C 18 INDUSTR IAL ENGINE W R H
C onfiguración: C 18 Industrial Engine W R H00001-UP

Desarmado y Armado
C15 and C18 Industrial Engines
Número de medio -RENR8630-11 Fecha de publicación -01/05/2020 Fecha de actualización -18/05/2020

i02721549

Gear Group (Front) - Remove


SMCS - 1206-011

Removal Procedure
Table 1
Required Tools

Tool Part Number Part Description Qty

A 1P-0510 Driver Group 1

Start By:

a. Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove".

b. Remove the air compressor, if necessary. Refer to Disassembly and Assembly, "Air Compressor - Remove and
Install".

c. Remove the water pump, if necessary. Refer to Disassembly and Assembly, "Water Pump - Remove".

d. Remove the auxiliary water pump, if necessary. Refer to Disassembly and Assembly, "Auxiliary Water Pump -
Remove".

e. Remove the fuel transfer pump, if necessary. Refer to Disassembly and Assembly, "Fuel Transfer Pump -
Remove".

NOTICE
Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/sis… 1/7
30/12/2020 C18 Industrial Engine WRH00001-UP(SEBP3816 - 85) - Documentación

NOTICE
Do not turn the crankshaft or the camshaft while the camshaft gear is
removed. If the front gear group is not correctly timed during installation,
interference can occur between the pistons and the valves, resulting in
damage to the engine.

Note: Be sure to mark the orientation of each of the gears for installation purposes.

Illustration 1 g01008429

1. Remove bolts (2) and thrust plate (1).

Illustration 2 g01008430
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/sis… 2/7
30/12/2020 C18 Industrial Engine WRH00001-UP(SEBP3816 - 85) - Documentación

2. Remove sealing plate (3) and adapter (4).

Illustration 3 g01008431

3. Remove O-ring seal (5) and O-ring seal (6) from sealing plate (3).

Illustration 4 g01101536

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/sis… 3/7
30/12/2020 C18 Industrial Engine WRH00001-UP(SEBP3816 - 85) - Documentación

4. Remove bolts (8), plate (9), and adjustable idler gear assembly (7).

5. Use Tooling (A) and remove the sleeve bearing from adjustable idler gear assembly (7).

Illustration 5 g01101045

6. Remove bolts (11), plate (12), and idler gear assembly (10).

7. Use Tooling (A) and remove the sleeve bearing from idler gear assembly (10).

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/sis… 4/7
30/12/2020 C18 Industrial Engine WRH00001-UP(SEBP3816 - 85) - Documentación

Illustration 6 g01101048

8. Remove bolts (14), plate (15), and cluster gear assembly (13).

9. Use Tooling (A) and remove the sleeve bearing from cluster gear assembly (13).

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/sis… 5/7
30/12/2020 C18 Industrial Engine WRH00001-UP(SEBP3816 - 85) - Documentación

Illustration 7 g01101050

Note: Stub shaft assembly (16) must be removed in order to remove plate (22). The backlash for the camshaft
gear and the adjustable idler gear assembly will need to be readjusted at assembly.

10. Remove nuts (17) and remove stub shaft assembly (16).

Note: Stub shaft (18) must be removed in order to remove plate (22).

11. Remove nuts (19) and remove stub shaft (18).

12. Remove bolts (21) and remove stub shaft (20).

13. Remove locking bolts (23) that hold plate (22) to the cylinder block. Remove plate (22).

14. If studs (24) are loose or the threads are damaged, remove the studs from the front plate.

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/sis… 6/7
30/12/2020 C18 Industrial Engine WRH00001-UP(SEBP3816 - 85) - Documentación

Illustration 8 g01101052

15. Remove integral seal (25) from the cylinder block.

C opyright 1993 - 2020 C ate rpillar Inc. W e d De c 30 2020 11:26:39 GMT-0500 (hora e stándar orie ntal)
Todos los de re chos re se rvados.
R e d privada para lice nciados de l SIS. pvalde z

https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sisweb/sis… 7/7

You might also like