808

PC SOFTW ARE
DEEP SEA ELECTRONICS PLC
CONFIGURATION
INTERFACE

Issue 2
VH 27/6/01

DESCRIPTION

The 808 PC Software Configuration The software offers the following options:
Interface is designed for use with the
following DSE systems: ► LOAD previous configurations from
disk.
► 511/512 manual start.
► 520/521/560 auto-start. ► SAVE new configurations to disk.
► 530 automatic transfer switch.
► 540 range of protection ► READ the existing configuration from
expansion/annunciator modules. the module.
► The 808 interface will also be used
SPECIFICATON
to configure a number of future DSE ► WRITE a new configuration to the DC SUPPLY :
modules. module. The 808 interface is powered from
the module to which it is connected
The 808 interface allows the user to ► EDIT the configuration currently so no external power supply is
access the configuration stored within the required. The module however will
loaded in the PC.
module, enabling changes to be made to need to be connected to a suitable
DC supply.
the settings e.g. ► PRINT the configuration currently
loaded in the PC. DIMENSIONS:
► Edit MISCELLANEOUS items 57mm x 55mm x 16mm
► View the DIAGNOSTIC display from OPERATING TEMPERATURE
► Edit CONFIGURABLE INPUTS the module. RANGE:
o
-15 to +55 C
► Edit RELAY OUTPUTS ► CALIBRATE the module meter drive INDICATIONS:
output. 'Link OK' in corner of diagnostic
► Edit FRONT PANEL LED’S screen plus link status indication.
► SET-UP the software, such as COM PC REQUIREMENTS:
► Edit SYSTEM TIMERS port selection. Processor:
486 66Mhz
► Edit ANALOGUE LEVELS ► QUIT Operating System:
Windows 95/98/2000, Windows NT.
Ram:
The interface kit comprises:
16Mb
Monitor:
► Interface module. NOTE
14 inch SVGA (640x480 resolution)
Fixed disk:
For further details on using the
► 25 way to 9 way RS232 adapter 10Mb free (80Mb minimum)
software and configuration options,
cable and interconnecting FCC 68 Disk drive:
please refer to the 808 Operating
CD-ROM drive for software
cable to allow connection to the Manual. installation.
module. Communications:
An RS232 comms port is needed to
TM
► CD containing the MS-Windows communicate with the 808.
based PC software and various
CONNECTION:
module configuration files to aid
The interface should be connected
rapid module configuration.
to the appropriate PC COM port on
your computer system, and the
Also included on the CD is a
FCC68 cable inserted into the
program which can be used to make
socket on the rear of the module to
labels for the configurable LEDs on
be configured.
a module to identify functions.
CASE DIMENSIONS

FCC68 RS232

55.0mm RS232 55.0mm

FCC68

57.0mm
16.0mm

TYPICAL CONNECTIONS

51x,52x, 53x or 54x Module

DC Supply
Terminals 'Prog' Socket on rear of module

NOTE:- When connected to

808 a completed Panel/Gen-set
F
Real time diagnostic
status display is available

FOREST CITY GENERATORS

Bowden Hall, Bowden Lane, Marple, Stockport. SK6 6NE ENGLAND
Tel: +44 (0) 161 449 0660 / 0770 Fax: +44 (0) 161 449 0880 E-mail [email protected]