Mi Temperature and Humidity Monitor 2 Read this manual carefully before use, and retain it for

User Manual future reference.

Product Overview
Front

Top Ventilation Holes

Note:
Do not obstruct the ventilation
holes when installing or using
the monitor.

Lanyard Hole
Note:
To use the lanyard hole,
remove the back cover of the
monitor first.

Display

Rear

Rear Ventilation Holes

Note:
Do not obstruct the
ventilation holes when
installing or using the
monitor.
Adhesive Area

Cover Opening

01
Accessory c. Hanging: Remove the back cover of the monitor,
Adhesive Sticker and lead the lanyard's loop through the hole and
around the hook. Reinstall the back cover, then
hang the monitor.

Note: Lanyard is not included and sold separately.

Installation
Installing the Battery

Remove the cover from the

cover opening of the monitor,
and place a CR2032 battery
with the positive (+) side
facing upwards, then reinstall
the cover.

Note: Battery is not included

and sold separately.

Display Description
You can use and install your monitor in the following
ways:

a. Placing: Directly place the monitor on the surface Temperature

of the furniture such as table, bookshelf.

b. Using the adhesive

sticker: Remove the
release liner from one Data Transfer Symbol
side of the adhesive Temperature Unit
sticker to stick it on the Humidity
back of the monitor,
then remove the Low Battery Symbol
release liner from the
other side to stick it at
the desired place on
the wall. Comfort Level Symbol

02 03
Symbol Instructions

Temperature
Less than 19°C Between 19°C More than 27°C
and 27°C
Humidity

Less than 20%

Between 20%
and 85%

More than 85%

Open Mi Home/Xiaomi Home app, tap "+" on the upper
right, and then follow prompts to add your device.

Low Battery Notification * The app is referred to as Xiaomi Home app in Europe
(except for Russia). The name of the app displayed on
When the battery is at a low level, your device should be taken as the default.
this symbol appears on the
display. Please replace the Low Battery Symbol
battery. Note: The version of the app might have been
updated, please follow the instructions based
on the current app version.

Smart Connection Connect with Other Devices

Connect with Mi Home/Xiaomi Home App Make sure your temperature and humidity monitor is
connected with Mi Home/Xiaomi Home app. Tap " "
This product works with Mi Home/Xiaomi Home app *. on the upper right corner of the monitor's user
Control your device, and interact it and other smart interface, then follow the on-screen instructions to
home devices with Mi Home/Xiaomi Home app. connect with other smart devices.

Scan the QR code to download and install the app. You

will be directed to the connection setup page if the app
is installed already. Or search "Mi Home/Xiaomi Home"
in the app store to download and install it.

04 05
 Mi Temperature and Hu

Temperature

33.4
℃

Humidity

48
%

Temperature（℃） Humidity（%）

33.2℃ 33.5℃
30.1℃ 31.6℃
29.2℃

Daily Care & Maintenance

Note: The monitor can only connect with these
devices supporting the function of Mi Bluetooth Please prevent water from getting into the monitor
Gateway. Please contact the customer service when cleaning it.
for detailed information. When the surface of the monitor is dirty, it can be
wiped clean using a damp soft cloth with some
neutral detergent.

Precautions
Restoring Factory Settings Do not immerse the ventilation holes into any liquid.
Do not remove the monitor from a wall with force if
Remove the back cover when the monitor is working
it is attached with the adhesive sticker, so as to
normally, and use a conductive material to connect the
avoid damage to the wall or the monitor.
two contact points above the battery for about 5–8
This monitor is not suitable for use in environments
seconds. Once the monitor restarts, the factory
with temperatures below 0°C. Please keep it away
settings have been restored and previously saved data
from harsh environments with high temperatures or
has been cleared.
high humidity.
This monitor is designed to facilitate a healthy
lifestyle, but should not be used as a measuring tool.

06 07
Specifications All products bearing this symbol are waste
electrical and electronic equipment (WEEE as
Name: Mi Temperature and Humidity Monitor 2 in directive 2012/19/EU) which should not be
mixed with unsorted household waste.
Model: LYWSD03MMC
Instead, you should protect human health and the
Materials: ABS & PMMA
environment by handing over your waste equipment to
Dimensions: 43 × 43 × 12.5 mm a designated collection point for the recycling of waste
Net Weight: 18 g electrical and electronic equipment, appointed by the
Operating Voltage: DC 2.5–3 V government or local authorities. Correct disposal and
Battery Type: CR2032 (Not included) recycling will help prevent potential negative
Wireless Connectivity: Bluetooth 4.2 Bluetooth Low Energy consequences to the environment and human health.
Frequency Range: 2402MHz-2480MHz Please contact the installer or local authorities for more
information about the location as well as terms and
Temperature Measurement Range: 0°C to 60°C
conditions of such collection points.
Temperature Accuracy: ± 0.1°C
Humidity Measurement Range: 0–99% RH
Humidity Accuracy: ± 1% RH

Note: Illustrations of product, accessories, and user

interface in the user manual are for reference purposes Please take attention that changes or modification not
only. Actual product and functions may vary due to expressly approved by the party responsible for
product enhancements. compliance could void the user’s authority to operate
the equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
Hereby, MiaoMiaoCe Technology (Beijing)
including interference that may cause undesired
Co., Ltd. declares that the radio equipment
operation.
type LYWSD03MMC is in compliance with
Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet
address: http://www.mi.com/global/service/support/-
declaration.html
Version: V1.0

08 09
WARRANTY NOTICE not duly manufactured by Xiaomi and/or were not duly
acquired from Xiaomi or a Xiaomi’s official seller are not
covered by the present warranties. As per applicable
As a Xiaomi consumer, you benefit under certain
law you may benefit from warranties from the
conditions from additional warranties. Xiaomi offers
non-official retailer who sold the product. Therefore,
specific consumer warranty benefits which are in
Xiaomi invites you to contact the retailer from whom
addition to, and not instead of, any legal warranties
you purchased the product.
provided by your national consumer law. The duration
and conditions related to the legal warranties are
provided by respective local laws. For more information
about the consumer warranty benefits, please refer to
Xiaomi's official website https://www.mi.com/en/ser-
vice/warranty/. Except as prohibited by laws or
otherwise promised by Xiaomi, the after-sales services
shall be limited to the country or region of the original
purchase. Under the consumer warranty, to the fullest
extent permitted by law, Xiaomi will, at its discretion,
repair, replace or refund your product. Normal wear and
tear, force majeure, abuse or damage caused by the
user's negligence or fault are not warranted. The
contact person for the after-sale service may be any
person in Xiaomi's authorized service network, Xiaomi's
authorized distributors or the final vendor who sold the
products to you. If in doubt please contact the relevant
person as Xiaomi may identify.
The present warranties do not apply in Hong Kong and
Taiwan.
Products which were not duly imported and/or were
10 11