Scribd
Upload
57 views

Specific Impulse: Overall Performance

Rocket technology provides very high thrust, exhaust speeds over 10 times the speed of sound, and thrust-to-weight ratios over 100. Rockets can be optimized for extreme performance in one area at the expense of others. The most important metric for rocket efficiency is specific impulse, which is a measure of impulse per unit of propellant. Higher specific impulse means less propellant is required. Specific impulse depends on the propellant and is limited by chamber pressures and nozzle design. Net thrust of a rocket engine depends on exhaust mass flow and velocity as well as ambient pressure. Vacuum specific impulse provides an easy comparison between rockets and varies only with propellant flow rates and mixture ratios. Rockets can be throttled by controlling propellant

Uploaded by

Rajeev Gupta
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
57 views

Specific Impulse: Overall Performance

Rocket technology provides very high thrust, exhaust speeds over 10 times the speed of sound, and thrust-to-weight ratios over 100. Rockets can be optimized for extreme performance in one area at the expense of others. The most important metric for rocket efficiency is specific impulse, which is a measure of impulse per unit of propellant. Higher specific impulse means less propellant is required. Specific impulse depends on the propellant and is limited by chamber pressures and nozzle design. Net thrust of a rocket engine depends on exhaust mass flow and velocity as well as ambient pressure. Vacuum specific impulse provides an easy comparison between rockets and varies only with propellant flow rates and mixture ratios. Rockets can be throttled by controlling propellant

Uploaded by

Rajeev Gupta
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Overall performance[edit]

Rocket technology can combine very high thrust (meganewtons), very high exhaust speeds (around
10 times the speed of sound in air at sea level) and very high thrust/weight ratios
(>100) simultaneously as well as being able to operate outside the atmosphere, and while permitting
the use of low pressure and hence lightweight tanks and structure.
Rockets can be further optimised to even more extreme performance along one or more of these
axes at the expense of the others.

Specific impulse[edit]

Isp  in vacuum of various rockets

Rocket Propellants Isp, vacuum (s)

Space shuttle
liquid LOX/LH2 453[6]
engines

Space shuttle
APCP 268[6]
solid motors

Space shuttle
NTO/MMH 313[6]
OMS

Saturn V
LOX/RP-1 304[6]
stage 1

Main article: Specific impulse


The most important metric for the efficiency of a rocket engine is impulse per unit of propellant, this
is called specific impulse (usually written ). This is either measured as a speed (the effective exhaust
velocity  in metres/second or ft/s) or as a time (seconds). For example, if an engine producing 100
pounds of thrust runs for 320 seconds and burns 100 pounds of propellant, then the specific impulse
is 320 seconds. The higher the specific impulse, the less propellant is required to provide the desired
impulse.
The specific impulse that can be achieved is primarily a function of the propellant mix (and ultimately
would limit the specific impulse), but practical limits on chamber pressures and the nozzle expansion
ratios reduce the performance that can be achieved.

Net thrust[edit]
Main article: Thrust
Below is an approximate equation for calculating the net thrust of a rocket engine: [7]

where:  
=  exhaust gas mass flow

=  effective exhaust velocity (sometimes otherwise denoted as c in publications)

=  effective jet velocity when Pamb = Pe

=  flow area at nozzle exit plane (or the plane where the jet leaves the nozzle if separated
flow)

=  static pressure at nozzle exit plane

=  ambient (or atmospheric) pressure

Since, unlike a jet engine, a conventional rocket motor lacks an air intake, there is no 'ram
drag' to deduct from the gross thrust. Consequently, the net thrust of a rocket motor is equal
to the gross thrust (apart from static back pressure).
The  term represents the momentum thrust, which remains constant at a given throttle
setting, whereas the  term represents the pressure thrust term. At full throttle, the net thrust
of a rocket motor improves slightly with increasing altitude, because as atmospheric
pressure decreases with altitude, the pressure thrust term increases. At the surface of the
Earth the pressure thrust may be reduced by up to 30%, depending on the engine design.
This reduction drops roughly exponentially to zero with increasing altitude.
Maximum efficiency for a rocket engine is achieved by maximising the momentum
contribution of the equation without incurring penalties from over expanding the exhaust.
This occurs when . Since ambient pressure changes with altitude, most rocket engines
spend very little time operating at peak efficiency.
Since specific impulse is force divided by the rate of mass flow, this equation means that the
specific impulse varies with altitude.

Vacuum specific impulse, I [edit] sp

Due to the specific impulse varying with pressure, a quantity that is easy to compare and
calculate with is useful. Because rockets choke at the throat, and because the supersonic
exhaust prevents external pressure influences travelling upstream, it turns out that the
pressure at the exit is ideally exactly proportional to the propellant flow , provided the
mixture ratios and combustion efficiencies are maintained. It is thus quite usual to rearrange
the above equation slightly:[8]
and so define the vacuum Isp to be:
where:
    =  the speed of sound constant at the throat
  =  the thrust coefficient constant of the nozzle (typically about 2)
And hence:
Throttling[edit]
Rockets can be throttled by controlling the propellant combustion
rate  (usually measured in kg/s or lb/s). In liquid and hybrid rockets, the
propellant flow entering the chamber is controlled using valves, in solid
rockets it is controlled by changing the area of propellant that is burning
and this can be designed into the propellant grain (and hence cannot
be controlled in real-time).
Rockets can usually be throttled down to an exit pressure of about one-
third of ambient pressure[9] (often limited by flow separation in nozzles)
and up to a maximum limit determined only by the mechanical strength
of the engine.
In practice, the degree to which rockets can be throttled varies greatly,
but most rockets can be throttled by a factor of 2 without great difficulty;
[9]
 the typical limitation is combustion stability, as for example, injectors
need a minimum pressure to avoid triggering damaging oscillations
(chugging or combustion instabilities); but injectors can be optimised
and tested for wider ranges. For example, some more recent liquid-
propellant engine designs that have been optimised for greater
throttling capability (BE-3, Raptor) can be throttled to as low as 18–20
percent of rated thrust.[10][3] Solid rockets can be throttled by using
shaped grains that will vary their surface area over the course of the
burn.[9]

Energy efficiency[edit]
Further information: Rocket §  Energy efficiency

Rocket vehicle mechanical efficiency as a function of vehicle instantaneous


speed divided by effective exhaust speed. These percentages need to be
multiplied by internal engine efficiency to get overall efficiency.

Rocket engine nozzles are surprisingly efficient heat engines for


generating a high speed jet, as a consequence of the high combustion
temperature and high compression ratio. Rocket nozzles give an
excellent approximation to adiabatic expansion which is a reversible
process, and hence they give efficiencies which are very close to that of
the Carnot cycle. Given the temperatures reached, over 60% efficiency
can be achieved with chemical rockets.

You might also like