Scribd
Upload
74 views

A63 A64 Multi Position Cylinder

The document discusses multi-position cylinders that can transform into 3 or 4 positions depending on the stroke lengths of two connected cylinders. It provides details on: 1) How two cylinders with identical diameters but different stroke lengths of 50mm and 100mm can be connected to achieve 4 positions through energizing the valves in a specific order. 2) The specifications for multi-position cylinders including bore sizes from 32mm to 100mm, standard stroke lengths, working pressure and temperature ranges, and material compositions. 3) An intermediate flange that can be used to connect two cylinders and additional ordering information.

Uploaded by

Biswanath Lenka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
74 views

A63 A64 Multi Position Cylinder

The document discusses multi-position cylinders that can transform into 3 or 4 positions depending on the stroke lengths of two connected cylinders. It provides details on: 1) How two cylinders with identical diameters but different stroke lengths of 50mm and 100mm can be connected to achieve 4 positions through energizing the valves in a specific order. 2) The specifications for multi-position cylinders including bore sizes from 32mm to 100mm, standard stroke lengths, working pressure and temperature ranges, and material compositions. 3) An intermediate flange that can be used to connect two cylinders and additional ordering information.

Uploaded by

Biswanath Lenka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MULTI POSITION CYLINDER

Series A63, A64


Cat No A63, A64 - 01 - 03 - A

Multi Position Cylinders - ( Series A63, A64 - Ø32 to 100 mm )

A63 - Magnetic A64 - Non-magnetic

Features
 Elastomer end cushioning
 Wide varieties of mountings
 Space saving
 Magnetic and Non magnetic version
 Aluminium profile (square) cylinder barrel
 Magnetic sensor common for all sizes
( Refer Magnetic sensor catalogue )

Technical Specifications
Cylinder bore Ø ( mm ) 32 40 50 63 80 100
Standard strokes * ( mm ) 10, 15, 20, 25, 30, 40, 50, 60, 70, 80
Medium Compressed air - filtered - lubricated

Working pressure range 0.5 - 10 bar


Medium temperature 5° - 60° c
Materials of construction Aluminium, Nitrile, Steel, Polyurethane
@
Mountings Basic cylinder, Foot mounting, Front flange, Rear flange, Male clevis, Female clevis,
#
Accessories Clevis foot bracket, Wall mounting bracket, Rod end fork, Rod end aligner, Rod end spherical eye
* For Non standard or longer stroke cylinders, contact your regional office, dealer or JANATICS
Note : For details of Cylinder Accessories, refer catalogue Cat No A63, A64 - 01 - 02 - C (Page no. 1.5.1) and
Magnetic sensor, refer catalogue Series AM4 (Page no. 1a.2.1)

Multi position cylinder can transform to 3 or 4 positions depending upon selection of their strokes, by
connecting two cylinders of identical piston diameter and different stroke length in series (back-to-back). The
pistons of this cylinder travels in opposite directions. The cylinders is precisely stopped at the end of each
stroke by mechanical stopper. One end of the piston rod should be fixed for the cylinder to execute motion. The
cylinder must be connected only with slideing objects i.e. linear guides. The cylinder transforms to the end
position directly, or through intermediate position, which can be obtained through appropriate actuation.
1 2 3 4
Two cylinders of identical diameter with different stroke A B C D
length connected in series to achieve 4 positions:

The multiposition cylinder used in this system


executes to 4 positions including home position. The
cylinder are with identical diameter Ø32 with strokes
of cylinders being 50 mm and 100 mm i.e. 1:2 ratio.
The required sequence of the cylinder were be obtained
by energising the valves in appropriate order as
mentioned below:

 Ports A, D - Stroke 1
 Ports B, D - Stroke 2
 Ports A, C - Stroke 3
 Ports B, C - Stroke 4

1.5.11
MULTI POSITION CYLINDER
Series A63, A64
Cat No A63, A64 - 01 - 03 - A

Multi Position Cylinder - ( Series A63, A64 - Ø32 to 100 mm )


A C B

+ Add stroke
Cylinder
ZA Tol ZB Tol L A -0.5
bore Ø
32 44 ±0.5 51 13 19
40 45 52 15 19
±0.7 ±1.6
50 45 53 15 22
63 49 57 15 22
±0.8
80 54 64 17 28
±2
100 67 ±1 77 19.5 28

Intermediate Flange - ( Ø32 - 100 mm )


Cylinder
bore Ø L Ordering No.

32 13 AJ2032
40 AJ2040
50 15 AJ2050
63 AJ2063
80 17 AJ2080
100 19.5 AJ2100

Note :- Supplied with hexagonal bolt - 2 nos., Socket head cap screw - 2nos. & Guide pin - 1 no.

How to order
Female Thread
Ordering example :- a. A63050050O, b. A63050060O, c. Intermediate flange = Ordering no. A63050050060MO

Male Thread
Ordering example :- a. A63050050O-M, b. A63050060O-M, c. Intermediate flange = Ordering no. A63050050060MOM

For details of Mountings & Accessories refer Product Catalogue Cat No A63, A64 - 01 - 02 - C (Page no. 1.5.1)

Subject to change

1.5.12

You might also like