AIR PREPARATION UNITS

FRL MODULAR Series FRLM1A

Cat No FRLM1A - 01 - A
FRL MODULAR WITH INTERNAL AUTODRAIN - 3/8, 1/2, 3/4, 1”
Individual Filter - Regulator combination & Lubricator units easily removable / mountable without disturbing the pipe line

Features
 Modular type for easy and fast maintenance
 Suitable for wall mounting
 Filter - Bronze filtering element
- Separator and shield for efficient moisture separation
Internal Autodrain - Float type, no electrical connections required.
- Manual drain is also provided / possible.
- Provision for drain tube connection, to take the
condensate away from the unit, to keep the working
area clean.
 Regulator - Diaphragm operated, relieving type
- Pressure compensated by balanced poppet
- Flow compensated (with venturi) for faster response.
- Non raising 'Press to lock' adjusting knob for locking
at any set pressure
 Lubricator - Fog / Mist type Lubricator
- Fine adjustment of lubrication
- Lubrication proportional to flow
 Steel bowl guard, bayonet type on FRLM14, FRLM15 & FRLM17 models
 Good flow and regulating characteristics

Technical Specifications
Model FRLM14…A FRLM15…A FRLM17…A FRLM17…A

Medium Compressed air

Port size G3/8 G1/2 G3/4 G1

Pressure gauge port size G1/8 G1/8 G1/4 G1/4

@
Flow rate (lts / min) 2000 3500 3500 5000

Operating pressure (bar) 2 - 10

#
Regulating pressure range (bar) 0.2 - 2, 0.2 - 4, 0.5 - 7, 0.5 - 10 (Standard)

Ambient / Medium temperature 5° - 50° C

#
Filteration (µm) 1, 5, 25, 40 (standard), 50, 100
Min operating flow (lts / min) 40 45 50 50
Bowl capacity Filter (ml) 32 44 165 165
(at maximum condensate level)
Bowl capacity Lubricator (ml) 57 152 200 200
(at maximum condensate level)
Recommended oil ISO VG 32 (Servo System 32)

Bowl material Polycarbonate

Installation Any position for Regulator. Vertical for Filter and Lubricator

Materials of construction Aluminium, Bronze, Brass, Steel, Acetal, Polycarbonate, SS, Nitrile
Optional accessories * Pressure gauge

Weight (Kg) 1.58 2.84 4.93 4.87

@ Supply pressure 7 bar , Set pressure 6 bar , Pressure drop ∆ p = 1bar ( For standard models )
# For details see " How to order "

* For details refer optional accessories Cat No APA - 01 - C

4.14.1
 AIR PREPARATION UNITS
FRL MODULAR Series FRLM1A
Cat No FRLM1A - 01 - A
Model FRLM14...A, FRLM15...A
E GØ

Model FRLM17...A GØ
E

Model W V A B E F GØ J L T J2 H1 H2

FRLM14…A G3/8 G1/8 250 272 95 45 40 70 7 7 69 55 45

FRLM15…A G1/2 G1/8 305 335 125 55 51 90 9 9 86 80 45

FRLM17…A G3/4 G1/4 370 368 130 70 51 100 12 10 105 80 45

FRLM17…A G1 G1/4 370 368 130 70 51 100 12 10 105 80 45

Precautions
1. Note the direction of flow before installation and connect piping accordingly.
2. Flush pipings for dirt, dust, rust and other foreign particles.
3. Install in clean atmosphere.
4. Nipples of taper threads ( R ) to be used with teflon tape. Ensure teflon tape doesnot enter the unit during tightening.
Nipples of straight threads ( G ) to be used with sealing washer.
5. Polycarbonate bowls may get damaged and possibly fail if exposed to synthetic oils, thinner, solvents, trichloroethylene,
kerosene or other aromatic hydrocarbons.

Pressure Setting
Pull the knob and adjust by turning the knob clockwise to increase the pressure. Push the knob back to its locked position.
( Turning the knob counter clockwise will reduce the pressure )

4.14.2
 AIR PREPARATION UNITS
FRL MODULAR Series FRLM1A
Cat No FRLM1A - 01 - A
Flow Graphs
3/8" FRLM 1/2" FRLM
6 6

5 5
Secondary Pressure, bar

Secondary Pressure, bar

4 4

3 3

2 2

1 1

0 1000 2000 3000 4000 0 1000 2000 3000 4000 5000

Flow, Nl/min Flow, Nl/min

3/4" FRLM 1" FRLM

6 6
Secondary Pressure, bar

Secondary Pressure, bar

5 5

4 4

3 3

2 2

1 1

0 2000 4000 6000 8000 10000 12000 0 2500 5000 7500 10000 12500 15000

Flow, Nl/min Flow, Nl/min

Flow graphs are for 40µm filterations only

How to order
FRLM1 A

Body & Port size Filteration in µm Pressure range Internal Autodrain

462 G3/8 0 - 1 1 0.2 - 2 bar
563 G1/2 1 - 5 2 0.2 - 4 bar
764 G3/4 2 - 25 3 0.5 - 7 bar
765 G1 3 - 40 (Standard) 4 0.5 - 10 bar (Standard)
4 - 50
5 - 100

Ordering example : Filter Regulator Lubricator Modular - 3/8 ( with G3/8 port size ) with 5µm Filter and pressure range
0.5 - 7 bar with Internal Autodrain: Ordering No: FRLM146213-A
If ordered as 3/8 FRLM with Internal Autodrain, our standard model FRLM146234-A, with 40µm Filter and
pressure range 0.5 - 10 with Internal Autodrain will be supplied.

Subject to change

4.14.3