Scribd
Upload
97 views

Robo Master

robo master v44

Uploaded by

Gabi Stroe-Ilinca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
97 views

Robo Master

robo master v44

Uploaded by

Gabi Stroe-Ilinca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

Graphtec Corporation

ROBO Master (OPS656) Ver.5.30 Supplementary Information


-------------------------------------------------------------------------------

Introduction

This file provides important information on the use of the ROBO Master
(OPS656).
Be sure to read through this file carefully before attempting to use the ROBO
Master.

Operating Environment

32-bit OS : Windows 2000


(Proffesional)
Windows XP
(Home Edition, Professional)
Windows Vista
(Home Basic, Home Premium, Business, Enterprise, Ultimate)
Windows 7
(Home Basic, Home Premium, Professional, Enterprise, Ultimate)

64-bit OS : Windows XP x64 Edition


(Proffesional)
Windows Vista x64 Edition
(Home Basic, Home Premium, Business, Enterprise, Ultimate)
Windows 7 x64 Edition
(Home Basic, Home Premium, Professional, Enterprise, Ultimate)

CPU : Pentium III 600 MHz or more (32-bit)


1GHz 64-bit (x64) processor or faster
Memory : 128 MB or more (at least 256 MB recommended)
Monitor : Capable of displaying 1024 x 768 pixels, High Color
(True Color recommended)
Mouse
CD-ROM Drive

Installation

Run the SETUP.EXE file to begin installation. Follow the on-screen


instructions to complete the installation.

Usage Precautions

1) Correct operation with either Windows 95, Windows 98 Second Edition,


Windows Me or Windows NT 4.0 is not guaranteed.

2) Please refer to the Craft ROBO User's Manual for information on


registration mark alignment.

3) If Cropping will be performed in Output Settings >Common Settings,


please use a size smaller than A4. In addition, please use a smaller
size when using this function together with the Tiling function in
Output Settings.
4) We recommend that an inkjet printer be used for printing images that
will be cut on the Craft ROBO. With laser printers, the printed images
may become distorted due to paper skew or slanted feeding. This makes
it difficult to align the cutlines with the pre-printed images for print
& cut operations, and there may be large discrepancies in the alignment
positions, especially in areas that are not close to the registration
marks.

5) Do not run the Craft ROBO controller or press the Craft ROBO Controller
button while the Craft ROBO is operating.

Trademarks

* Windows, Windows NT are registered trademarks of Microsoft Corporation.


* Graphtec has exclusive copyrights to the Craft ROBO, ROBO Master, and
OPS656 product names.

END

You might also like