Scribd
Upload
93 views1 page

Snubbers Type 31

Snubbers type 31 are specially designed shock absorbers used in nuclear installations to secure steam generators and reactor coolant pumps. They absorb heavy loads and are custom built for restricted installation spaces. The table provides general information on specifications like maximum load capacity, dimensions, and weight for initial planning of different snubber type 31 models. They are made of high-strength stainless steel and fitted with exchangeable valves to allow for in-service testing.

Uploaded by

Achraf Boudaya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
93 views1 page

Snubbers Type 31

Snubbers type 31 are specially designed shock absorbers used in nuclear installations to secure steam generators and reactor coolant pumps. They absorb heavy loads and are custom built for restricted installation spaces. The table provides general information on specifications like maximum load capacity, dimensions, and weight for initial planning of different snubber type 31 models. They are made of high-strength stainless steel and fitted with exchangeable valves to allow for in-service testing.

Uploaded by

Achraf Boudaya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Snubbers

Type 31
Snubbers
3
type 31 98 16 to 31 58 16

Snubbers type 31 are


specially conceived for the
absorption of particularly
heavy loads. They are mainly
used in nuclear installations
to secure steam generators
connecting lug travel indicator 
G and reactor codant pumps.
ball bushing joint name plate
Due to the normally very
6°

valves
fluid level indicator restricted installation space
SG

they are typically custom-


6°

built for the given conditions.


L
The table on this page there-
fore serves as general orien-

H
tation for initial planning.
45°
max.

The body and connecting

ØD
lugs are made of high-ten-
sile stainless steel castings.


d3
R F R
E

nom. load emergency stroke Ø d3 E E Lmax weight Order details:


type [kN]  Level C   ØD  min max F G H  R SG [kg] snubber type 31 .. ..
31 98 16 550 735 100 240 70 620 720 95 90 310 115 105 49 152 marking: ...
31 99 16 550 735 200 240 70 735 935 95 90 310 145 105 49 181
31 08 16 1000 1335 100 330 100 765 865 120 110 385 145 140 70 285
31 09 16 1000 1335 200 330 100 880 1080 120 110 385 200 140 70 338
31 28 16 2000 2660 100 440 120 870 970 160 155 450 150 160 85 648
31 38 16 3000 4000 100 540 140 1020 1120 190 180 620 100 200 90 968
31 48 16 4000 5320 100 580 160 1050 1150 205 200 585 255 245 105 1300
31 58 16 5000 6650 100 630 180 1140 1240 230 220 670 205 290 105 1750

 See technical specifications, table: ‘permissible loads’  Emin = piston rod retracted  Connection possibilities: see
(p. 0.6) and ‘welding of weld-on brackets' (p. 3.22). Emax = piston rod extended bolt diameters of weld-on
brackets type 35 or dynamic
 Usual design load for earthquakes and similar load cases.  Lmax at 80˚C clamps in product group 3
See also technical specifications on p. 0.6.
 Design of travel indicator for travel range 8
(100mm stroke).

LISEGA snubbers type 31 are


fitted with exchangeable valves
for in-service tests on site.

Snubber type 31 in special configuration

3.20

You might also like