Module Handbook

A Module Handbook or collection of module descriptions that is also available for

students to consult should contain the following information about the individual modules:

Module designation Vehicle Control

Module level, if applicable Advance

Code, if applicable PPTOUMxxxx

Subtitle, if applicable Powertrain Control (P), Chassis Control (C) , , Body Control
(B) , ECU & Communication (U)

Courses, if applicable 1) Powertrain Control : ICE course, Hybrid Engine Course,

EV course, Transmission control
2) Chassis Control : Brake control, Traction control, DSC
,Suspension control, Active power steering, ADAS,
Autonomous control
3) Body Control : Lighting, Signalling, Vehicle
instrumentation, Comfort system, smart switching
4) ECU & Communication : In Vehicle Networking, Vehicular
network, Vehicle to Vehicle Integration(V2V), Vehicle to
Infrastructure integration (V2I), ITS

Semester(s) in which the Semester 4,5,6,7,8

module is taught
Person responsible for the Dr Muchammad Harly, ST, MT
module
Lecturer Dr Muchammad Harly, ST, MT

Language Indonesia, English, German

 Relation to curriculum For all programmes, including those running out, in which the
module is taught:
Programme : Bachelor Graduate of Automotive
Specialization : Vehicle Control
compulsory/elective(**) :
semester (SMT) : 4,5,6,7,8

CODE Course SCU H SMT

PPTOUM6039 Automotive Microcontroller 2 4 3
Practicum**)
PPTOUM6030 Practicum Chassis Control System 2 4 6
PPTOUM6046 Electrical Motor & Control 2 4 5
Technology**)
PPTOUM6028 Practicum Vehicle Drive Control 2 4 5
System
PPTOUM6051 Hybrid Electric Vehicle (HEV)**) 2 4 6
PPTOUM6052 Vehicle accessories and ITS**) 2 4 8
PPTOUM6053 Vehicle Audio/Video **) 2 4 8
PPTOUM6055 Practicum Hybrid Electric Vehicle 7
2 4
(HEV)**)
PPTOUM6056 Practicum Electric Vehicle (EV)**) 2 4 7
PPTOUM6057 Vehicle Networking **) 2 4 6
PPTOUM6058 Autonomous Vehicle**) 2 4 8
PPTOUM6059 Basic Service Advisor**) 2 4 4
Practicum Vehicle ECU 6
PPTOUM6060 2 4
Programming**)
Type of teaching, contact method: lecture, lesson, practical, project, seminar , writing
hours papers

Workload Lecture & exercise (CH), laboratory session (LS) and private
study (PS), including examination (E) specified in hours,1 and
in total.
CODE Course CH LS PS E Tot
PPTOUM6039 Automotive 1 2 0.75 0.25 4
Microcontroller
Practicum**)
PPTOUM6030 Practicum Chassis Control 1 2 0.75 0.25 4
System
PPTOUM6046 Electrical Motor & Control 1.5 1.5 0.75 0.25 4
Technology**)
PPTOUM6028 Practicum Vehicle Drive 1 2 0.75 0.25 4
Control System
PPTOUM6051 Hybrid Electric Vehicle 1.5 1.5 0.75 0.25 4
(HEV)**)
PPTOUM6052 Vehicle accessories and 1.5 1.5 0.75 0.25 4
ITS**)
PPTOUM6053 Vehicle Audio/Video **) 1.5 1.5 0.75 0.25 4

PPTOUM6055 Practicum Hybrid Electric 1 2 0.75 0.25

4
Vehicle (HEV)**)
Practicum Electric Vehicle 1 2 0.75 0.25
PPTOUM6056 4
(EV)**)
PPTOUM6057 Vehicle Networking **) 1.5 1.5 0.75 0.25 4
PPTOUM6058 Autonomous Vehicle**) 1.5 1.5 0.75 0.25 4
PPTOUM6059 Basic Service Advisor**) 1.5 1.5 0.75 0.25 4
Practicum Vehicle ECU 1 2 0.75 0.25
PPTOUM6060 4
Programming**)

1
When calculating contact time, each contact hour is counted as a full hour because the organisation of the
schedule, moving from room to room, and individual questions to lecturers after the class, all mean that about
60 minutes should be counted.
 Credit points (one credit point equates to about 15 hours of coursework,
including all forms of teaching contact, assessment tasks and
private study for an average student)
Credit point = (13 x 4 hours)/15 hours = 3.466

Requirements according to 1) Passing all course above 4 semester

the examination regulations 2) Passing all exercise this 13 course

Recommended prerequisites Competences in Computer Programming and soft computing

such as:
1) Engineering Software (Matlab, C++, Interfacing)
2) Automotive Equipment (Scan tool, Exhaust gas etc)

Module objectives/intended learning outcomes, that student should attain in the module
learning outcomes E.g. in terms of:
1) Knowledge:
a. Advance engineering mathematics, physic and chemical
b. Automotive Engineering
c. Electrical and Electronic engineering
d. Soft Computer Programming & AI
e. Design Engineering Software
2) Skills: cognitive and practical abilities for which knowledge
is used
a) Enable to practice vehicle control investigation and
trouble shooting
b) Enable how to recognise wiring diagram of vehicle
control
c) Expert in using all automotive equipment
d) Enable to use and build vehicle control hardware
3) Competences: integration of knowledge, skills and social
and methodological capacities in working or learning
situations2
a) Have ability to solve uncertainty problem prefect by
using a compatible tools and equipment by self or as a
team
b) Good in communication and collaboration
c) Discipline in learning and working

2
Cf. European Commission: Proposal for a Recommendation of the European Parliament and the European
Council on the establishment of the European Qualifications Framework for lifelong learning, COM(2006) 479
final, 2006/0163 (COD), Brussels 05/09(2006.
Content The description should clearly indicate the weighting of the
content and the level.

Course Content
Automotive Control Algorithm and coding C-
Automotive
language based with compiler. Download
Microcontroller
program file to hardware target and real time
Practicum**)
test and evaluation
Practicum Chassis Control All Chassis Control Algorithm and coding C-
System language based with compiler. Problem
solving all chassis control problem by using
automotive tool and equipment
Electrical Motor & Control All type Electrical motor/generator used in
Technology**) HEV and EV such as all phase BLDC,
induction motor, Asynchrony/synchronous,
SRM motor. All type of motor drivers.
Problem solving electrical motor and its
driver by using standard tool and equipment
Practicum Vehicle Drive All vehicle drive cover ICE, HEV and EV
Control System Control Algorithm and coding C-language
based with compiler. Problem solving all
vehicle drive control problem by using
automotive tool and equipment
Hybrid Electric Vehicle Technology HEV such as hybrid topology,
(HEV)**) technology all level hybridization. Function
and how is work of all HEV parts and battery.
Hybrid control, ICE control, Battery
Management control, Inverter, converter ,all
sensors and instrumentation of HEV. HEV
problem solving by using standard tool and
equipment and safety.
Vehicle accessories and Vehicle modification for drive performance,
ITS**) safety improvement and comfortable
development. Transponders for intelligent
transport system and control.
Vehicle Audio/Video **) Diagnose vehicle audio and video system,
Problem solving by using standard toll and
equipment. Battery and charging system
calculation for audio/video nodification
Diagnose of HEV problems, Measuring HEV
Practicum Hybrid Electric
points, overhaul and problem solving of HEV
Vehicle (HEV)**)
by using Tool and equipment.
Diagnose of EV problems, Measuring EV
Practicum Electric Vehicle
points, overhaul and problem solving of EV
(EV)**)
by using Tool and equipment.
Vehicle Network technology covers CAN
technology, Vehicle protocol communication
Vehicle Networking **) vehicular network, Gateway, network
transceiver hardware device and problem
solving
Path planning, Vehicle track controlling.
Advance driver assistance system,
Autonomous sensing technology (Radar,
Autonomous Vehicle**) Lidar, Camera vision, Ultra sonic,
GPS/GPRS, and actuator such as auto
steering , drive and braking. Problem solving
in ADAS and autonomous vehicle
Basic Service Advisor**)
Practicum Vehicle ECU ECU flash memory remapping, ECU re
Programming**) setting, refreshing and programming.
Study and examination 1) Lecturer should be conducted by internal lecturer and
requirements and forms of industrial expert at related course.
examination 2) Examination should be done by both university and related
industry
3) Assessment covers theory and practical problems
according to real industry job.
4) Examination can be done by student after finishing all
course

Media employed 1) Teaching aids related module/course

All type of electrical motor and generators
Motor driver (Converter-inverter-ECU speed driver)
Hybrid ECU-ICE ECU & Battery Management ECU
All type of HEV and EV Battery
Real HEV engine Simulator
Real EV simulator
ICE simulators (Diesel, EFI and GDI simulators
Microcontroller package
Oscilloscope and generator function
RCL meter
2) Real ICE vehicle
3) Real HEV vehicle
4) Real EV vehicle
5) Vehicle computerized tool and equipment such as
Scan tool
ECU Flash Remapped
ECU downloader
6) Software Matlab- C compiler – Visual basic – Electronics
design (Proteus)
Reading list 1) Advance engineering mathematics , Kreyzsik,
2) Teori getaran dengan penerapannya ,Willia Tomson
3) Mekanika Fluida, Victor L Streeter
4) Elektrochemie, Heinz Ebert
5) Matlab for engineering application , William J Palm
6) Autotransmission , automotive Simulink , Mathwork
7) Modeling And Control Of Automatic Transmissio With
Planetary Gear For Shift Quality, Patinya Samanuhut
8) Design and Synthesis of active and passive vehicle
suspension , Fu Cheng Wang
9) Vehicle dynamics theory and application, Reza n
Nazar
10) Theory of Ground vehicle , JY Wong
11) Electric Vehicle Technology Explained, James
Larminie
12) Investigation of vehicle crash modelling techniques:
theory and application, Witold Pawlus
13) Automated and Autonomous Driving, International
Transport Forum
14) Transmisi otomatis bergigi elektronik , Harly, Marji
15) Teknologi ABS,TCS ,ESP, Harly, Marji