Scribd
Upload
564 views

Install Ni Labview Student Edition

This document provides instructions for installing several National Instruments software packages: 1) LabVIEW Student Edition, which is downloaded from the NI website and allows a 7-day trial of the software. 2) NI VISA, which is downloaded and installed to enable communication with instruments. 3) The JKI VI Package Manager (VIPM), which is used to install additional LabVIEW tools and packages like the LabVIEW Interface for Arduino (LIFA). The document outlines the steps to install each package.

Uploaded by

Wirawan Nurdin
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
564 views

Install Ni Labview Student Edition

This document provides instructions for installing several National Instruments software packages: 1) LabVIEW Student Edition, which is downloaded from the NI website and allows a 7-day trial of the software. 2) NI VISA, which is downloaded and installed to enable communication with instruments. 3) The JKI VI Package Manager (VIPM), which is used to install additional LabVIEW tools and packages like the LabVIEW Interface for Arduino (LIFA). The document outlines the steps to install each package.

Uploaded by

Wirawan Nurdin
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 19

nfi

 Install NI LabVIEW Student Edition


1> Download LabVIEW software from National Instrument’s website
http://www.ni.com, you need to create an account to download the
software.
2> Now from your folder location double click setup.exe. Allow installer to
initialize and then select Next.

3> Select I Only want to evaluate the products. And then click Next.
4> Select the product you would like to install, just click left button of mouse
and select install. Select Next after selecting desired software.
5> Now, to search for any updates select the checkbox otherwise deselect the
checkbox. Select Next.

6> Now select the path where you want to install the software and select
Next.
7> Read and agree the software license. Two windows contains license
agreements for each select I accept and then click Next to proceed.
8> Ensure all the products to be installed. Select Next.

9> The installation will now begin. It may take some times to install your
software.
10> After installation the summary will be displayed. Select Next.

11> Now run you Software for 7 days. Select Launch LabVIEW.
 Install NI VISA
1> Download NI VISA from http://www.ni.com/download/ni-visa-
5.0.3/2251/en/ as a free download. Double click on the file
and then click Unzip.
2> Launch the NI VISA installer and click Next.

3> Select the location of the directory. Click Next.


4> Review the features to be installed. Click Next.

5> Check for the updates. Click Next.


6> Review the license agreement and click I accept. Click Next.

7> Review the list. Click Next.


8> NI VISA will begin installing. It may take some times depending upon the
configuration of your computer.

9> The NI VISA installation is Complete. Click Next.


10> Now your computer will ask for reboot.
 Install JKI VI Package Manager
1> Download JK VI Package Manager from jki.net/vipm/download as free
download.
2> Launch the VIPM installer. Click Next.

3> Review the license agreement. Click I have read. Click Next.
4> Select the path of the directory and Click Next.

5> VIPM will begin installing. And it may take some time to install.
6> The VIPM installation is complete. Click Finish.
 LabVIEW Interface for Arduino (LIFA)
1> Launch VIPM

2> Now find LabVIEW interface for arduino or you can enter Arduino in
search box in the upper right corner.
3> Click LabVIEW interface for arduino to select it and then click install
package button.

4> Review the package to be installed. Click Continue.


5> Review the Download Acknowledgement. Click I agree(Don’t Prompt
me again).

6> Review the license and click I accept.


7> Now VIPM will launch LabVIEW in the background. VIPM will begin
downloading the package from the labview tools network.

8> The labview interface for arduino is now installed. Click Finish.
9> Click on the File. Click New VI.

10> Now you will get two windows on screen. Block Diagram and Front
Panel. Now Right click anywhere on any window. You’ll get your
Arduino library.

You might also like