0% found this document useful (0 votes)
303 views

Configuration Script CSG - ATN910C-B.HUIZUCAR - PHEONIX.01

This document contains configuration settings for a network device including VPN instances, interfaces, routing protocols, SNMP settings, user accounts, and more. It configures MPLS tunnels, BGP routing, OSPF, and other protocols across multiple VPNs.

Uploaded by

Alex
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
303 views

Configuration Script CSG - ATN910C-B.HUIZUCAR - PHEONIX.01

This document contains configuration settings for a network device including VPN instances, interfaces, routing protocols, SNMP settings, user accounts, and more. It configures MPLS tunnels, BGP routing, OSPF, and other protocols across multiple VPNs.

Uploaded by

Alex
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 5

clock timezone CentralAmerica minus 06:00:00

system
undo dcn
y
sysname CSG.ATN910C-B.HUIZUCAR_PHEONIX.01
ssh client first-time enable
telnet server enable
ftp server enable
lldp enable
license
active port-basic slot 2 port 4
ntp-service unicast-server 172.16.128.1

tunnel-policy IPRAN
tunnel select-seq cr-lsp lsp load-balance-number 1
#
ip vpn-instance Huawei_O&M
ipv4-family
route-distinguisher 400:1
tnl-policy IPRAN
apply-label per-instance
vpn-target 65000:400 export-extcommunity
vpn-target 65000:401 import-extcommunity
#
ip vpn-instance Tigo_O&M
ipv4-family
route-distinguisher 300:1
tnl-policy IPRAN
apply-label per-instance
vpn-target 65000:300 export-extcommunity
vpn-target 65000:301 import-extcommunity
#
ip vpn-instance Tigo_Service
ipv4-family
route-distinguisher 100:1
tnl-policy IPRAN
apply-label per-instance
vpn-target 65000:100 export-extcommunity
vpn-target 65000:101 import-extcommunity
#
ip vpn-instance S1
ipv4-family
route-distinguisher 500:1
tnl-policy IPRAN
apply-label per-instance
vpn-target 65000:505 export-extcommunity
vpn-target 65000:505 import-extcommunity
#
set net-manager vpn-instance Huawei_O&M
#
router id 172.16.131.227
#
bfd
#
mpls lsr-id 172.16.131.227
mpls
mpls te
mpls rsvp-te
mpls rsvp-te bfd all-interfaces enable
mpls rsvp-te bfd all-interfaces min-tx-interval 100 min-rx-interval 100
mpls rsvp-te hello
mpls rsvp-te srefresh
mpls te cspf
#
explicit-path To_RSG.CX.PYNZA_M.01
next hop 10.0.28.38 include loose
#
explicit-path To_ASG.CX.BEETHOVEN_M.01
next hop 10.0.28.34 include loose
#
mpls ldp
#
ntp-service unicast-server 172.16.128.1
#
interface GigabitEthernet0/2/4
description **To_CSG.ATN910C.NUEVO_CUSCATLAN.01_GigabitEthernet0/2/4**
mtu 9500
ip add 10.0.30.81 30
ospf cost 100
ospf network-type p2p
ospf ldp-sync
mpls
mpls te
mpls rsvp-te
mpls rsvp-te hello
mpls rsvp-te srefresh
mpls ldp
trust upstream default
#
interface LoopBack0
ip address 172.16.131.227 255.255.255.255
#
interface LoopBack1
ip binding vpn-instance Huawei_O&M
ip address 172.16.139.227 255.255.255.255
#
interface Tunnel0/0/1
ip address unnumbered interface LoopBack0
tunnel-protocol mpls te
destination 172.16.128.5
mpls te tunnel-id 1
mpls te record-route label
mpls te path explicit-path To_RSG.CX.PYNZA_M.01
mpls te backup hot-standby mode revertive wtr 60
mpls te backup hot-standby overlap-path
mpls te reoptimization
mpls te commit
#
interface Tunnel0/0/2
ip address unnumbered interface LoopBack0
tunnel-protocol mpls te
destination 172.16.128.6
mpls te tunnel-id 2
mpls te record-route label
mpls te path explicit-path To_ASG.CX.BEETHOVEN_M.01
mpls te backup hot-standby mode revertive wtr 60
mpls te backup hot-standby overlap-path
mpls te reoptimization
mpls te commit
#
bgp 65000
router-id 172.16.131.227
graceful-restart
peer 172.16.128.5 as-number 65000
peer 172.16.128.5 connect-interface loopback0
peer 172.16.128.6 as-number 65000
peer 172.16.128.6 connect-interface loopback0

ipv4-family unicast
undo synchronization
undo peer 172.16.128.5 enable
y
undo peer 172.16.128.6 enable
y
#
ipv4-family vpnv4
policy vpn-target
peer 172.16.128.5 enable
y
peer 172.16.128.6 enable
y
ipv4-family vpn-instance Huawei_O&M
import-route direct
import-route static

ipv4-family vpn-instance Tigo_O&M


import-route direct
import-route static

ipv4-family vpn-instance Tigo_Service


import-route direct
import-route static

ipv4-family vpn-instance S1
import-route direct
import-route static
#
ospf 1 router-id 172.16.131.227
bfd all-interfaces enable
bfd all-interfaces min-tx-interval 100 min-rx-interval 100
spf-schedule-interval intelligent-timer 200 50 50
lsa-originate-interval intelligent-timer 500 50 100
lsa-arrival-interval intelligent-timer 100 50 50
opaque-capability enable
stub-router on-startup
area 7
network 10.0.30.81 0.0.0.0
network 172.16.131.227 0.0.0.0
stub
mpls-te enable
#
bfd lsp1 bind mpls-te interface Tunnel0/0/1 te-lsp
discriminator local 1
discriminator remote 799
process-pst
commit
#
bfd lsp2 bind mpls-te interface Tunnel0/0/2 te-lsp
discriminator local 2
discriminator remote 799
process-pst
commit
#
bfd te1 bind mpls-te interface Tunnel0/0/1
discriminator local 101
discriminator remote 1799
min-tx-interval 50
min-rx-interval 50
process-pst
commit
#
bfd te2 bind mpls-te interface Tunnel0/0/2
discriminator local 102
discriminator remote 1799
min-tx-interval 50
min-rx-interval 50
process-pst
commit
#
snmp-agent
snmp-agent community write cipher tigou2000
snmp-agent community read cipher tigo1234
snmp-agent sys-info version all
snmp-agent target-host trap address udp-domain 172.30.14.172 vpn-instance
Huawei_O&M params securityname tigou2000 v2c private-netmanager ext-vb
snmp-agent trap source LoopBack1
snmp-agent sys-info location SAN MIGUEL
snmp-agent trap enable
snmp-agent packet max-size 12000
snmp-agent notification-log enable
snmp-agent extend error-code enable
snmp-agent inform timeout 5 resend-times 6 pending 7
snmp-agent notification-log enable
snmp-agent notification-log global-ageout 24
#
aaa
local-user nsorto password cipher Huawei@123
local-user nsorto level 3
local-user nsorto service-type ftp telnet ssh
local-user nsorto ftp-directory cfcard:/
local-user crivera password cipher Huawei@123
local-user crivera level 3
local-user crivera service-type ftp telnet ssh
local-user crivera ftp-directory cfcard:/
local-user tigohuawei password cipher TigoATN950&910
local-user tigohuawei user-group manage-ug
local-user tigohuawei level 3
local-user tigohuawei service-type ssh telnet
local-user tigohuawei ftp-directory cfcard:/
#
Stelnet server enable
#
ssh user Tigohuawei
ssh user Tigohuawei authentication-type password
ssh user Tigohuawei service-type all
#
snetconf server enable
ssh server-source all-interface
telnet server-source all-interface
y
sftp client-source -i LoopBack 1
#
ssh client first-time enable
#
user-interface con 0
authentication-mode password
set authentication password cipher TigoHuawei

user-interface vty 0 4
authentication-mode aaa
idle-timeout 5 0
protocol inbound all
#
commit
return
save
y

You might also like