Scribd
Upload
69 views1 page

PRV Audio 12MR2000 Datasheet

This document provides specifications for the Professional Midrange Driver model 12MR2000. It can handle up to 1,000 watts continuously and has a sensitivity of 97 dB. The driver has a 4" voice coil and die cast aluminum frame. It has a frequency response between 60-5,000 Hz and is designed for use in professional audio applications.

Uploaded by

Andres Gonzalez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
69 views1 page

PRV Audio 12MR2000 Datasheet

This document provides specifications for the Professional Midrange Driver model 12MR2000. It can handle up to 1,000 watts continuously and has a sensitivity of 97 dB. The driver has a 4" voice coil and die cast aluminum frame. It has a frequency response between 60-5,000 Hz and is designed for use in professional audio applications.

Uploaded by

Andres Gonzalez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

12MR2000

Professional Midrange Driver

KEY FEATURES

• Large 4” Voice coil


• 1,000 Watts continuous power handling
• 97 dB Sensitivity
• Die cast aluminum frame

Nominal Diameter 12” (305 mm)


Nominal impedance 8 ohms
GENERAL SPECIFICATIONS

Rated Power Handling 1,000 Watts


Program Power 2,000 Watts
Sensitivity 2.83V at 1m 97 dB
Recommended Hi Pass Crossover* 180 Hz*
*For Full Power Handling *12db Per Octave Crossover

Frequency Response at -10dB 60 - 5,000 Hz


Voice Coil Diameter 4” (100 mm)
Voice Coil Wire CCAW 2000w Program

12MR2000
8 ohms
4000w Peak

1000w RMS

Voice Coil Winding Depth 17.0 mm


Former Material Aluminum
Magnetic Gap Depth 7.5 mm
Frame Material Die cast aluminum
12.36" (312mm)

Equivalent Volume Vas 52.52 l


THIELE-SMALL PARAMETERS

Excursion (mathematical)*** Xmax 6.62 mm

5.47" (139mm)
5.91" (150mm)

Free Air Resonance Fs 57.23 Hz


Mechanical Factor Qms 23.84
Electrical Factor Qes 0.34
Total Factor Qts 0.33
Cone Area Sd 573 cm² 8.66" (220mm)
Mechanical Mass Mms 67.39 g
11.06" (281mm)
Bl Factor Bl 21.25 Tm
Dc Resistance Re 6.3 Ohms Frequency Response Measured at 2.83v/1m
110
Inductance Le 0.83 mH at 1 kHz
dBSPL
Mechanical Mass Without Air Mmd 59.64 g
100
Mechanical Compliance Cms 0.114 mm/N
90

Overal Diameter 12.28” (312 mm)


EXTRA INFO

80
Front Mount Baffle Cutout 11.42” (281 mm)
Mounting Depth 5.47” (139 mm)
70
Overall Depth 5.91” (150 mm)
Net Weight 23.04 Lbs (10.45 kg)
60
Shipping Weight 24.92 Lbs (11.30 kg) 20 50 100 200 500 1k 2k Hz 5k 10k 20k

Carton Dimensions W x L x H 14.37” x 14.37” x 8.07” PRV AUDIO USA (USA and Export) PRV AUDIO BRAZIL (Brazilian Sales Only)
FORT LAUDERDALE, FL SAO LEOPOLDO, RS
(365 x 365 x 205 mm) [email protected] [email protected]
***Xmax=(Voice coil winding depth-Magnetic Gap depth)/2+ Mgnetic Gap Depth/4 www.prvaudio.com www.pvaudio.com.br
PRV Audio strives to manufacture the best drivers in the Professional Loudspeaker industry. Specifications are subject to change due to continuous product improvement - Rev: 01/18

You might also like