GAS TRAIN EQUIPMENT

We believe in Quality, we contribute

to increase the Italian Technology
and the Style that countersigns
the excellence of Italy all over the world.

SALES ALL OVER

THE WORLD
EXPORTING
TO 91 COUNTRIES

www.gecasrl.it
 GAS FILTERS AUTOMATIC GAS VALVES

AUTOMATIC GAS VALVES - BRASS BODY

GAS GOVERNORS

gas train equipment

BALL
LL VALVES
VAL
ALVE
VESS

RELIEF VALVES
VAL
ALVE
V S

PRESSURE GUAGES
GAS SOLENOID VALVES MANUAL RESET

4 5
 Gas Governors

Index
09

Gas Filters 50

Automatic gas valves - Brass Body 74

Automatic gas valves - Pmax 360mbar 78

Automatic gas valves - 6 bar 94

Automatic gas valves 104

- Normally open - Vent valve
Relief Valves 108

Gas solenoid valves manual reset 116

- Normally open
Gas solenoid valves manual reset 128
- Normally close
Gas solenoid valves manual reset 140
with CPI integrated
Accessories for gas train 146

Measurement Instruments 170

6 7
 Gas Governors
GAS GOVERNOR 500 MBAR

GAS GOVERNOR ½” , ¾”, 1” – Pmax 500 mbar p. 10

Gas Governors
GAS GOVERNOR 1 ¼” , 1 ½” – Pmax 500 mbar p. 12
›› Spring-loaded governors, are designed and built
according UNI EN 88 class A - group 2 specifications, GAS GOVERNOR 2” – Pmax 500 mbar p. 14
can be used for all the types of natural gas LPG or not
corrosive gases. These regulators are widely used in GAS GOVERNOR DN656, DN80, DN100 p. 16
Pmax 500 mbar
supply lines for mixed and combinated burners and in
the piped distribution of methane gas and LPG in both
industrial and non-industrial applications. Spring-
loaded/ governors are self-acting type with balanced GAS GOVERNOR 1 BAR
obturator and double safety diaphragm. The double
diaphragm allow to use the device within the cabinet, GAS GOVERNOR ½”, ¾” and 1” – Pmax 1 bar p. 18
without connecting an external pipe venting.
GAS GOVERNOR 1 ¼”, 1 ½” – Pmax 1 bar p. 20

GAS GOVERNOR 2”– Pmax 1 bar p. 22

GAS GOVERNOR DN656, DN80, DN100 p. 24

Pmax 1 bar

GAS GOVERNOR 2 BAR

GAS GOVERNOR ½”, ¾” and 1”– Pmax 2 bar p. 26

GAS GOVERNOR 1 ¼”, 1 ½” – Pmax 2 bar p. 28

GAS GOVERNOR 2”– Pmax 2 bar p. 30

GAS GOVERNOR DN656, DN80, DN100 p. 32

Pmax 2 bar

9
 GAS GOVERNORS

GAS GOVERNOR ½”, ¾”, 1” – Pmax 500 mbar

1
2
3

13 7 26
10
9
14 11 12
6
8
17

20
19
18
16 27
21 15

23 22

24 25

Code Description Dimension Pmax TECHNICAL FEATURES 1 Seal cap 15 Shaft

2 O ring 16 Upper bush
RG015 Gas Governor ½” 500 mbar Pmax inlet max – 500 mbar
3 Spring compressor 17 Disc
RG020 Gas Governor ¾” 500 mbar Setting outlet 10 – 130 mbar – Standard spring supplied 10 – 27 mbar – 4 Washer 18 Working diaphragm
Other spring on request – Range as per below table 6 Screws 19 Lower bush
RG025 Gas Governor 1” 500 mbar
7 Vent cap 20 Body
RGD25 Gas Governor DN25 500 mbar Filtering ≤ 50μm – Plastic cartidge 8 Upper cover 21 Sensing tube
9 Plastic Washer 22 Seal washer
Inlet - Outlet Thread gas ½”, ¾”, 1” - ISO 228
Connection DN25 - Sliding Aluminium flange PN10 10 Safety diaphragm 23 Plastic ring
RG015-FT Gas Governor with filter ½” 500 mbar 11 Calibrated nozzle 24 Gasket
Test point 1/8” NPT 12 Washer 25 Cover
RG020-FT Gas Governor with filter ¾” 500 mbar
13 Disc 26 Nut
Working Temperature - 20 °C – + 60 °C 14 Compensation diaphragm 27 Filter cartidge
RG025-FT Gas Governor with filter 1” 500 mbar
RGD25-FT Gas Governor with filter DN25 500 mbar Use Not aggressive gases of three families – Natural Gas –
LPG – Town Gas
115 mm 100 mm
Approval UNI EN 88-1:2011
RG015-TPIO Gas Governor with test point in/out ½” 500 mbar
RG020-TPIO Gas Governor with test point in/out ¾” 500 mbar Materials:
75 mm
RG025-TPIO Gas Governor with test point in/out 1” 500 mbar
Complete Body Die – Cast Aluminium Gd – AlSi12Cu – EN AB 46100
RGD25-TPIO Gas Governor with test point in/out DN25 500 mbar

154 mm
Diaphragms NBR 60Sh – DvGW EN 549

Plastic components Yellow POM / Pa 66 + 25% Gf

RG015-FT-TPIO Gas Governor with filter and test point in/out ½” 500 mbar
79 mm

RG020-FT-TPIO Gas Governor with filter and test point in/out ¾” 500 mbar
Code: Color Range mbar
RG025-FT-TPIO Gas Governor with filter and test point in/out 1” 500 mbar
SPW1-5 White 5 - 14 mbar
RGD25-FT-TPIO Gas Governor with filter and test point in/out DN25 500 mbar
SPY1-5 Yellow 6 - 22 mbar
SPN1-5 Neutral 10 - 27 mbar Dimension ½” ¾” 1”
SPR1-5 Red 28 - 70 mbar WEIGHT (kgs) 0,720 0,688 0,663
SPBK1-5 Black 60 - 130 mbar

10 11
 GAS GOVERNORS

GAS GOVERNOR 1 ¼”, 1 ½” – Pmax 500 mbar

1
2
3

9
13 7 26
11
10 12 8
14

16 18
15 17
27
20

19
22

21
28 23

24 25

Code Description Dimension Pmax TECHNICAL FEATURES 1 Seal cap 15 Shaft

2 O ring 16 Upper bush
RG032 Gas Governor 1¼” 500 mbar Pmax inlet max – 500 mbar
3 Spring compressor 17 Disc
RG040 Gas Governor 1 ½” 500 mbar Setting outlet 10 – 300 mbar – Standard spring supplied 10 – 27 mbar – 4 Washer 18 Working diaphragm
Other spring on request – Range as per below table 6 Screws 19 Lower bush
RGD32 Gas Governor DN32 500 mbar
7 Vent cap 20 Body
RGD40 Gas Governor DN40 500 mbar Filtering ≤ 50μm – Viledon cartridge 8 Upper cover 21 Sensing tube
9 Plastic Washer 22 Seal washer
Inlet - Outlet Thread gas 1 ¼” 1½” - ISO 228
Connection DN32 - DN40 - Sliding Aluminium flange PN10 10 Safety diaphragm 23 Plastic ring
RG032-FT Gas Governor with filter 1¼” 500 mbar 11 Calibrated nozzle 24 Gasket
Test point 1/8” NPT 12 Washer 25 Cover
RG040-FT Gas Governor with filter 1 ½” 500 mbar
13 Disc 26 Nut
Working Temperature - 20 °C – + 60 °C 14 Compensation diaphragm 27 Filter cartidge
RGD32-FT Gas Governor with filter DN32 500 mbar
Use Not aggressive gases of three families – Natural Gas – LPG – 28 Screw cover
RGD40-FT Gas Governor with filter DN40 500 mbar
Town Gas

Approval UNI EN 88-1:2011 210 mm 194 mm

RG032-TPIO Gas Governor with test point in/out 1¼” 500 mbar
RG040-TPIO Gas Governor with test point in/out 1½” 500 mbar

102 mm
Materials:
RGD32-TPIO Gas Governor with test point in/out DN32 500 mbar
Complete Body Die – Cast Aluminium Gd – AlSi12Cu - EN AB 46100
RGD40-TPIO Gas Governor with test point in/out DN40 500 mbar

244 mm
Diaphragms NBR 60Sh – DvGW EN 549

Plastic components White POM / Pa 66 + 25% Gf

142 mm

RG032-FT-TPIO Gas Governor with filter and test point in/out 1¼” 500 mbar
RG040-FT-TPIO Gas Governor with filter and test point in/out 1½” 500 mbar
Code: Color Range mbar
RGD32-FT-TPIO Gas Governor with filter and test point in/out DN32 500 mbar
SPW2-5 White 5 - 14 mbar
RGD40-FT-TPIO Gas Governor with filter and test point in/out DN32 500 mbar SPY2-5 Yellow 6 - 22 mbar
SPN2-5 Neutral 10 - 27 mbar
Dimension 1 ¼” 1 ½”
SPR2-5 Red 28 - 70 mbar
SPBK2-5 Black 60 - 130 mbar WEIGHT (kgs) 3,140 3,060
SPB2-5 Blue 120 - 300 mbar

12 13
 GAS GOVERNORS

GAS GOVERNOR 2” – Pmax 500 mbar

1
2

9
13 7 26
10 11 12 8
14

16 18
15 17
27
20

19
22
21
28 23

24 25

Code Description Dimension Pmax TECHNICAL FEATURES 1 Seal cap 15 Shaft

2 O ring 16 Upper bush
RG050 Gas Governor 2” 500 mbar Pmax inlet max – 500 mbar
3 Spring compressor 17 Disc
RGD50 Gas Governor DN50 500 mbar Setting outlet 10 – 300 mbar – Standard spring supplied 10 – 27 mbar – 4 Washer 18 Working diaphragm
Other spring on request – Range as per below table 6 Screws 19 Lower bush
7 Vent cap 20 Body
RG050-FT Gas Governor with filter 2” 500 mbar Filtering ≤ 50μm – Viledon cartridge 8 Upper cover 21 Sensing tube
9 Plastic Washer 22 Seal washer
RGD50-FT Gas Governor with filter DN50 500 mbar Inlet- Outlet Thread gas 2” - ISO 228
Connection DN50 - Sliding Aluminium flange PN10 10 Safety diaphragm 23 Plastic ring
11 Calibrated nozzle 24 Gasket
Test point 1/8” NPT 12 Washer 25 Cover
RG050-TPIO Gas Governor with test point in/out 2” 500 mbar
13 Disc 26 Nut
Working Temperature - 20 °C – + 60 °C 14 Compensation diaphragm 27 Filter cartidge
RGD50-TPIO Gas Governor with test point in/out DN50 500 mbar
Use Not aggressive gases of three families – Natural Gas – LPG – 28 Screw cover
Town Gas
RG050-FT-TPIO Gas Governor with filter and test point in/out 2” 500 mbar
Approval UNI EN 88-1:2011 266 mm 234 mm
RGD50-FT-TPIO Gas Governor with filter and test point in/out DN50 500 mbar

122 mm
Materials:

Complete Body Die – Cast Aluminium Gd – AlSi12Cu - EN AB 46100

307 mm
Diaphragms NBR 60Sh – DvGW EN 549

Plastic components White POM / Pa 66 + 25% Gf

185 mm

Code: Color Range mbar

SPW3-5 White 5 - 14 mbar

SPY3-5 Yellow 6 - 22 mbar
SPN3-5 Neutral 10 - 27 mbar
Dimension 2"
SPR3-5 Red 28 - 70 mbar
SPBK3-5 Black 60 - 130 mbar WEIGHT (kgs) 5,8
SPB3-5 Blue 120 - 300 mbar

14 15
 GAS GOVERNORS

GAS GOVERNOR DN65, DN80, DN100 - Pmax 500 mbar

1
2
3

13 26
10 7 9 11 12
14
8
6

17

20

16 18
19
21 15
27
28

23 22

24 25

Code Description Dimension Pmax TECHNICAL FEATURES 1 Seal cap 15 Shaft

2 O ring 16 Upper bush
RGD65 Gas Governor DN65 500 mbar Pmax inlet max – 500 mbar
3 Spring compressor 17 Disc
RGD80 Gas Governor DN80 500 mbar Setting outlet 10 – 300 mbar – Standard spring supplied 10 – 27 mbar – 4 Washer 18 Working diaphragm
Other spring on request 6 Screws 19 Lower bush
RGD100 Gas Governor DN100 500 mbar
7 Vent cap 20 Body
Filtering ≤ 50μm – Viledon cartridge 8 Upper cover 21 Sensing tube
RGD65 - FT Gas Governor with filter DN65 500 mbar 9 Plastic Washer 22 Seal washer
Inlet - Outlet Flanged connection DN65
RGD80 - FT Gas Governor with filter DN80 500 mbar Connection DN80 - DN100 - PN16 10 Safety diaphragm 23 Plastic ring
11 Calibrated nozzle 24 Gasket
RGD100 - FT Gas Governor with filter DN100 500 mbar Test point Inlet / outlet on request – Test point 1/8” NPT 12 Washer 25 Cover
13 Disc 26 Nut
RGD65 - TPIO Gas Governor with test point in/out DN65 500 mbar Working Temperature - 20 °C – + 60 °C 14 Compensation diaphragm 27 Filter cartidge
Use Not aggressive gases of three families – Natural Gas – LPG – 28 Screw cover
RGD80 - TPIO Gas Governor with test point in/out DN80 500 mbar
Town Gas
RGD100 - TPIO Gas Governor with test point in/out DN100 500 mbar
Approval UNI EN 88-2:2008
427 mm Ø 320 mm
RGD65 - FT - TPIO Gas Governor with filter and test point in/out DN65 500 mbar
RGD80 - FT - TPIO Gas Governor with filter and test point in/out DN80 500 mbar Materials:
180 mm
RGD100 - FT - TPIO Gas Governor with filter and test point in/out DN100 500 mbar Complete Body Die – Cast Aluminium Gd – AlSi12Cu - EN AB 46100

440 mm
Diaphragms NBR 60Sh – DvGW EN 549

Plastic components White POM / Pa 66 + 25% Gf

260 mm

Spring Range: Color Range mbar

White 5 - 14 mbar
Yellow 6 - 22 mbar
Neutral 10 - 27 mbar
Dimension DN65 DN80 DN100
Red 28 - 70 mbar
Black 60 - 130 mbar WEIGHT (kgs) 16 15,3 14,6
Blue 120 - 300 mbar

16 17
 GAS GOVERNORS

GAS GOVERNOR ½”, ¾” and 1” – Pmax 1 bar

1
2
3

13 7 26
10
9
14 11 12
6
8
17

20
19
18
16 27
21 15

23 22

24 25

Code Description Dimension Pmax TECHNICAL FEATURES 1 Seal cap 15 Shaft

2 O ring 16 Upper bush
RG015-1B Gas Governor ½” 1 bar Pmax inlet max – 1 mbar
3 Spring compressor 17 Disc
RG020-1B Gas Governor ¾” 1 bar Setting outlet 10 – 300 mbar – Standard spring supplied 10 – 27 mbar – 4 Washer 18 Working diaphragm
Other spring on request – Range as per below table 6 Screws 19 Lower bush
RG025-1B Gas Governor 1” 1 bar
7 Vent cap 20 Body
RGD25-1B Gas Governor DN25 1 bar Filtering ≤ 50μm – 8 Upper cover 21 Sensing tube
9 Plastic Washer 22 Seal washer
Inlet - Outlet Thread gas ½” , ¾” 1” - ISO 228
Connection DN25 - Sliding Aluminium flange PN10 10 Safety diaphragm 23 Plastic ring
RG015-FT-1B Gas Governor with filter ½” 1 bar 11 Calibrated nozzle 24 Gasket
Test point 1/8” NPT 12 Washer 25 Cover
RG020-FT-1B Gas Governor with filter ¾” 1 bar
13 Disc 26 Nut
Working Temperature - 20 °C – + 60 °C 14 Compensation diaphragm 27 Filter cartidge
RG025-FT-1B Gas Governor with filter 1” 1 bar
RGD25-FT-1B Gas Governor with filter DN25 1 bar Use Not aggressive gases of three families – Natural Gas – LPG –
Town Gas
115 mm 100 mm
Approval UNI EN 88-2:2008
RG015-1B-TPIO Gas Governor with test point in/out ½” 1 bar
RG020-1B-TPIO Gas Governor with test point in/out ¾” 1 bar Materials:
75 mm
RG025-1B-TPIO Gas Governor with test point in/out 1” 1 bar
Complete Body Die – Cast Aluminium Gd – AlSi12Cu - EN AB 46100

154 mm
Diaphragms NBR 60Sh – DvGW EN 549
RG015-FT-1B-TPIO Gas Governor with filter and test point in/out ½” 1 bar
Plastic components Yellow POM / Pa 66 + 25% Gf
RG020-FT-1B-TPIO Gas Governor with filter and test point in/out ¾” 1 bar
79 mm

RG025-FT-1B-TPIO Gas Governor with filter and test point in/out 1” 1 bar

Code: Color Range mbar

SPY1-12 Yellow 6 - 22 mbar

Dimension ½” ¾” 1”
SPN1-12 Neutral 10 - 27 mbar
SPR1-12 Red 28 - 70 mbar WEIGHT (kgs) 0,720 0,688 0,663

18 19
 GAS GOVERNORS

GAS GOVERNOR 1 ¼”, 1 ½” – Pmax 1 bar

1
2
3

9
13 7 26
11
10 12 8
14

16 18
15 17
27
20

19
22

21
28 23

24 25

Code Description Dimension Pmax TECHNICAL FEATURES 1 Seal cap 15 Shaft

2 O ring 16 Upper bush
RG032-1B Gas Governor 1 ¼” 1 bar Pmax inlet max – 1 bar
3 Spring compressor 17 Disc
RG040-1B Gas Governor 1 ½” 1 bar Setting outlet 10 – 300 mbar – Standard spring supplied 10 – 27 mbar – 4 Washer 18 Working diaphragm
Other spring on request – Range as per below table 6 Screws 19 Lower bush
RGD32-1B Gas Governor DN32 1 bar
7 Vent cap 20 Body
RGD40-1B Gas Governor DN40 1 bar Filtering ≤ 50μm – Viledon cartridge 8 Upper cover 21 Sensing tube
9 Plastic Washer 22 Seal washer
Inlet - Outlet Thread gas 1 ¼” 1½” - ISO 228
Connection DN32 DN40 - Sliding Aluminium flange PN10 10 Safety diaphragm 23 Plastic ring
RG032-FT-1B Gas Governor with filter 1 ¼” 1 bar 11 Calibrated nozzle 24 Gasket
Test point 1/8” NPT 12 Washer 25 Cover
RG040-FT-1B Gas Governor with filter 1 ½” 1 bar
13 Disc 26 Nut
Working Temperature - 20 °C – + 60 °C 14 Compensation diaphragm 27 Filter cartidge
RGD32-FT-1B Gas Governor with filter DN32 1 bar
Use Not aggressive gases of three families – Natural Gas – LPG – 28 Screw cover
RGD40-FT-1B Gas Governor with filter DN40 1 bar
Town Gas

Approval UNI EN 88-2:2008 210 mm 194 mm

RG032-1B-TPIO Gas Governor with test point in/out 1 ¼” 1 bar

102 mm
RG040-1B-TPIO Gas Governor with test point in/out 1 ½” 1 bar Materials:
RGD32-1B-TPIO Gas Governor with test point in/out DN32 1 bar
Complete Body Die – Cast Aluminium Gd – AlSi12Cu - EN AB 46100
RGD40-1B-TPIO Gas Governor with test point in/out DN40 1 bar

244 mm
Diaphragms NBR 60Sh – DvGW EN 549

Plastic components White POM / Pa 66 + 25% Gf

142 mm

RG032-FT-1B-TPIO Gas Governor with filter and test point in/out 1 ¼” 1 bar
RG040-FT-1B-TPIO Gas Governor with filter and test point in/out 1 ½” 1 bar
RGD32-FT-1B-TPIO Gas Governor with filter and test point in/out DN32 1 bar
RGD40-FT-1B-TPIO Gas Governor with filter and test point in/out DN40 1 bar Code: Color Range mbar

SPY2-12 Yellow 6 - 22 mbar

Dimension 1 ¼” 1 ½”
SPN2-12 Neutral 10 - 27 mbar
SPR2-12 Red 28 - 70 mbar WEIGHT (kgs) 3,140 3,060
SPBK2-12 Black 60 - 130 mbar
20 21
 GAS GOVERNORS

GAS GOVERNOR 2” – Pmax 1 bar

1
2
3

9
13 7 26
11
10 12 8
14

16 18
15 17
27
20

19
22

21
28 23

24 25

Code Description Dimension Pmax TECHNICAL FEATURES 1 Seal cap 15 Shaft

2 O ring 16 Upper bush
RG050-1B Gas Governor 2” 1 bar Pmax inlet max – 1 bar
3 Spring compressor 17 Disc
RGD50-1B Gas Governor DN50 1 bar Setting outlet 10 – 300 mbar – Standard spring supplied 10 – 27 mbar – 4 Washer 18 Working diaphragm
Other spring on request – Range as per below table 6 Screws 19 Lower bush
7 Vent cap 20 Body
RG050-FT-1B Gas Governor with filter 2” 1 bar Filtering ≤ 50μm – Viledon cartridge 8 Upper cover 21 Sensing tube
9 Plastic Washer 22 Seal washer
RGD50-FT-1B Gas Governor with filter DN50 1 bar Inlet - Outlet Thread gas 2” - ISO 228
Connection DN50 - Sliding Aluminium flange PN10 10 Safety diaphragm 23 Plastic ring
11 Calibrated nozzle 24 Gasket
Test point 1/8” NPT 12 Washer 25 Cover
RG050-1B-TPIO Gas Governor with test point in/out 2” 1 bar
13 Disc 26 Nut
Working Temperature - 20 °C – + 60 °C 14 Compensation diaphragm 27 Filter cartidge
RGD50-1B-TPIO Gas Governor with test point in/out DN50 1 bar
Use Not aggressive gases of three families – Natural Gas – LPG – 28 Screw cover
Town Gas
RG050-FT-1B-TPIO Gas Governor with filter and test point in/out 2” 1 bar
Approval UNI EN 88-2:2008 266 mm 234 mm
RGD50-FT-1B-TPIO Gas Governor with filter and test point in/out DN50 1 bar

122 mm
Materials:

Complete Body Die – Cast Aluminium Gd – AlSi12Cu - EN AB 46100

307 mm
Diaphragms NBR 60Sh – DvGW EN 549

Plastic components White POM / Pa 66 + 25% Gf

185 mm

Code: Color Range mbar

SPY3-12 Yellow 6 - 22 mbar

Dimension 2"
SPN3-12 Neutral 10 - 27 mbar
SPR3-12 Red 28 - 70 mbar WEIGHT (kgs) 5,8
SPBK3-12 Black 60 - 130 mbar
22 23
 GAS GOVERNORS

GAS GOVERNOR DN65, DN80, DN100 - Pmax 1 bar

1
2
3

13 26
10 7 9 11 12
14
8
6

17

20

16 18
19
21 15
27
28

23 22

24 25

Code Description Dimension Pmax TECHNICAL FEATURES 1 Seal cap 15 Shaft

2 O-Ring 16 Upper bush
RGD65 - 1B Gas Governor DN65 1 bar Pmax inlet max – 1 bar
3 Spring compressor 17 Disc
RGD80 - 1B Gas Governor DN80 1 bar Setting outlet 10 – 300 mbar – Standard spring supplied 10 – 27 mbar – 4 Washer 18 Working diaphragm
Other spring on request 6 Screws 19 Lower bush
RGD100 - 1B Gas Governor DN100 1 bar
7 Vent cap 20 Body
Filtering ≤ 50μm – Viledon cartridge 8 Upper cover 21 Sensing tube
RGD65 - FT - 1B Gas Governor with filter DN65 1 bar 9 Plastic Washer 22 Seal washer
Inlet - Outlet Flanged connection DN65
RGD80 - FT - 1B Gas Governor with filter DN80 1 bar Connection DN80 - DN100 - PN16 10 Safety diaphragm 23 Plastic ring
11 Calibrated nozzle 24 Gasket
RGD100 - FT - 1B Gas Governor with filter DN100 1 bar Test point Inlet / outlet on request – Test point 1/8” NPT 12 Washer 25 Cover
13 Disc 26 Nut
RGD65 - 1B - TPIO Gas Governor with test point in/out DN65 1 bar Working Temperature - 20 °C – + 60 °C 14 Compensation diaphragm 27 Filter cartidge
Use Not aggressive gases of three families – Natural Gas – LPG – 28 Screw cover
RGD80 - 1B - TPIO Gas Governor with test point in/out DN80 1 bar
Town Gas
RGD100 - 1B - TPIO Gas Governor with test point in/out DN100 1 bar
Approval UNI EN 88-2:2008
427 mm Ø 320 mm
RGD65 - FT - 1B - TPIO Gas Governor with filter and test point in/out DN65 1 bar
RGD80 - FT - 1B - TPIO Gas Governor with filter and test point in/out DN80 1 bar Materials:
180 mm
RGD100 - FT - 1B - TPIO Gas Governor with filter and test point in/out DN100 1 bar Complete Body Die – Cast Aluminium Gd – AlSi12Cu - EN AB 46100

440 mm
Diaphragms NBR 60Sh – DvGW EN 549

Plastic components White POM / Pa 66 + 25% Gf

260 mm

Spring Range: Color Range mbar

White 5 - 14 mbar
Yellow 6 - 22 mbar
Neutral 10 - 27 mbar
Dimension DN65 DN80 DN100
Red 28 - 70 mbar
Black 60 - 130 mbar WEIGHT (kgs) 16 15,3 14,6

24 25
 GAS GOVERNORS

GAS GOVERNOR ½”, ¾” and 1”– Pmax 2 bar

1
2
3

13 7 26
10
9
14 11 12
6
8
17

20
19
18
16 27
21 15

23 22

24 25

Code Description Dimension Pmax TECHNICAL FEATURES 1 Seal cap 15 Shaft

2 O ring 16 Upper bush
RG015-2B Gas Governor ½” 2 bar Pmax inlet max – 2 bar
3 Spring compressor 17 Disc
RG020-2B Gas Governor ¾” 2 bar Setting outlet 10 – 300 mbar – Standard spring supplied 10 – 27 mbar – 4 Washer 18 Working diaphragm
Other spring on request – Range as per below table 6 Screws 19 Lower bush
RG025-2B Gas Governor 1” 2 bar
7 Vent cap 20 Body
RGD25-2B Gas Governor 1” 2 bar Filtering ≤ 50μm – 8 Upper cover 21 Sensing tube
9 Plastic Washer 22 Seal washer
Inlet - Outlet Thread gas ½” , ¾” 1” - ISO 228
Connection DN25 - Sliding Aluminium flange PN10 10 Safety diaphragm 23 Plastic ring
RG015-FT-2B Gas Governor with filter ½” 2 bar 11 Calibrated nozzle 24 Gasket
Test point 1/8” NPT 12 Washer 25 Cover
RG020-FT-2B Gas Governor with filter ¾” 2 bar
13 Disc 26 Nut
Working Temperature - 20 °C – + 60 °C 14 Compensation diaphragm 27 Filter cartidge
RG025-FT-2B Gas Governor with filter 1” 2 bar
RGD25-FT-2B Gas Governor with filter DN25 2 bar Use Not aggressive gases of three families – Natural Gas – LPG –
Town Gas
115 mm 100 mm
Approval UNI EN 88-2:2008
RG015-2B-TPIO Gas Governor with test point in/out ½” 2 bar
RG020-2B-TPIO Gas Governor with test point in/out ¾” 2 bar Materials:
75 mm
RG025-2B-TPIO Gas Governor with test point in/out 1” 2 bar
Complete Body Die – Cast Aluminium Gd – AlSi12Cu - EN AB 46100

154 mm
Diaphragms NBR 60Sh – DvGW EN 549
RG015-FT-2B-TPIO Gas Governor with filter and test point in/out ½” 2 bar
Plastic components Yellow POM / Pa 66 + 25% Gf
RG020-FT-2B-TPIO Gas Governor with filter and test point in/out ¾” 2 bar
79 mm

RG025-FT-2B-TPIO Gas Governor with filter and test point in/out 1” 2 bar

Code: Color Range mbar

SPY1-12 Yellow 6 - 22 mbar

Dimension ½” ¾” 1”
SPN1-12 Neutral 10 - 27 mbar
SPR1-12 Red 28 - 70 mbar WEIGHT (kgs) 0,720 0,688 0,663

26 27
 GAS GOVERNORS

GAS GOVERNOR 1 ¼”, 1 ½” – Pmax 2 bar

1
2
3

9
13 7 26
11
10 12 8
14

16 18
15 17
27
20

19
22

21
28 23

24 25

Code Description Dimension Pmax TECHNICAL FEATURES 1 Seal cap 15 Shaft

2 O ring 16 Upper bush
RG032-2B Gas Governor 1 ¼” 2 bar Pmax inlet max – 2 bar
3 Spring compressor 17 Disc
RG040-2B Gas Governor 1 ½” 2 bar Setting outlet 10 – 300 mbar – Standard spring supplied 10 – 27 mbar – 4 Washer 18 Working diaphragm
Other spring on request – Range as per below table 6 Screws 19 Lower bush
RGD32-2B Gas Governor DN32 2 bar
7 Vent cap 20 Body
RGD40-2B Gas Governor DN40 2 bar Filtering ≤ 50μm – Viledon cartridge 8 Upper cover 21 Sensing tube
9 Plastic Washer 22 Seal washer
Inlet - Outlet Thread gas 1 ¼” 1½” - ISO 228
Connection DN32 DN40 - Sliding Aluminium flange PN10 10 Safety diaphragm 23 Plastic ring
RG032-FT-2B Gas Governor with filter 1 ¼” 2 bar 11 Calibrated nozzle 24 Gasket
Test point 1/8” NPT 12 Washer 25 Cover
RG040-FT-2B Gas Governor with filter 1 ½” 2 bar
13 Disc 26 Nut
Working Temperature - 20 °C – + 60 °C
RGD32-FT-2B Gas Governor with filter DN32 2 bar 14 Compensation diaphragm 27 Filter cartidge
Use Not aggressive gases of three families – Natural Gas – LPG – 28 Screw cover
RGD40-FT-2B Gas Governor with filter DN40 2 bar
Town Gas

Approval UNI EN 88-2:2008 210 mm 194 mm

RG032-2B-TPIO Gas Governor with test point in/out 1 ¼” 2 bar

102 mm
RG040-2B-TPIO Gas Governor with test point in/out 1 ½” 2 bar Materials:
RGD32-2B-TPIO Gas Governor with test point in/out DN32 2 bar
Complete Body Die – Cast Aluminium Gd – AlSi12Cu - EN AB 46100
RGD40-2B-TPIO Gas Governor with test point in/out DN40 2 bar

244 mm
Diaphragms NBR 60Sh – DvGW EN 549

Plastic components White POM / Pa 66 + 25% Gf

142 mm

RG032-FT-2B-TPIO Gas Governor with filter test point in/out 1 ¼” 2 bar

RG040-FT-2B-TPIO Gas Governor with filter test point in/out 1 ½” 2 bar
RGD32-FT-2B-TPIO Gas Governor with filter test point in/out DN32 2 bar
RGD40-FT-2B-TPIO Gas Governor with filter test point in/out DN40 2 bar Code: Color Range mbar

SPY2-12 Yellow 6 - 22 mbar

Dimension 1 ¼” 1 ½”
SPN2-12 Neutral 10 - 27 mbar
SPR2-12 Red 28 - 70 mbar WEIGHT (kgs) 3,140 3,060
SPBK2-12 Black 60 - 130 mbar
28 29
 GAS GOVERNORS

GAS GOVERNOR 2”– Pmax 2 bar

1
2
3

9
13 7 26
11
10 12 8
14

16 18
15 17
27
20

19
22

21
28 23

24 25

Code Description Dimension Pmax TECHNICAL FEATURES 1 Seal cap 15 Shaft

2 O ring 16 Upper bush
RG050-2B Gas Governor 2” 2 bar Pmax inlet max – 2 bar
3 Spring compressor 17 Disc
RGD50-2B Gas Governor DN50 2 bar Setting outlet 10 – 300 mbar – Standard spring supplied 10 – 27 mbar – 4 Washer 18 Working diaphragm
Other spring on request – Range as per below table 6 Screws 19 Lower bush
7 Vent cap 20 Body
RG050-FT-2B Gas Governor with filter 2” 2 bar Filtering ≤ 50μm – Viledon cartridge 8 Upper cover 21 Sensing tube
9 Plastic Washer 22 Seal washer
RGD50-FT-2B Gas Governor with filter DN50 2 bar Inlet - Outlet Thread gas 2” - ISO 228
Connection DN50 - Sliding Aluminium flange PN10 10 Safety diaphragm 23 Plastic ring
11 Calibrated nozzle 24 Gasket
Test point 1/8” NPT 12 Washer 25 Cover
RG050-2B-TPIO Gas Governor with test point in/out 2” 2 bar
13 Disc 26 Nut
Working Temperature - 20 °C – + 60 °C 14 Compensation diaphragm 27 Filter cartidge
RGD50-2B-TPIO Gas Governor with test point in/out DN50 2 bar
Use Not aggressive gases of three families – Natural Gas – LPG – 28 Screw cover
Town Gas
RG050-FT-2B-TPIO Gas Governor with filter and test point in/out 2” 2 bar
Approval UNI EN 88-2:2008 266 mm 234 mm
RGD50-FT-2B-TPIO Gas Governor with filter and test point in/out DN50 2 bar

122 mm
Materials:

Complete Body Die – Cast Aluminium Gd – AlSi12Cu - EN AB 46100

307 mm
Diaphragms NBR 60Sh – DvGW EN 549

Plastic components White POM / Pa 66 + 25% Gf

185 mm

Code: Color Range mbar

SPY3-12 Yellow 6 - 22 mbar

Dimension 2”
SPN3-12 Neutral 10 - 27 mbar
SPR3-12 Red 28 - 70 mbar WEIGHT (kgs) 5,8
SPBK3-12 Black 60 - 130 mbar
30 31
 GAS GOVERNORS

GAS GOVERNOR DN65, DN80, DN100 - Pmax 2 bar

1
2
3

13 26
10 7 9 11 12
14
8
6

17

20

16 18
19
21 15
27
28

23 22

24 25

Code Description Dimension Pmax TECHNICAL FEATURES 1 Seal cap 15 Shaft

2 O-Ring 16 Upper bush
RGD65 – 2B Gas Governor DN65 2 bar Pmax inlet max – 2 bar
3 Spring compressor 17 Disc
RGD80 – 2B Gas Governor DN80 2 bar Setting outlet 10 – 300 mbar – Standard spring supplied 10 – 27 mbar – 4 Washer 18 Working diaphragm
Other spring on request 6 Screws 19 Lower bush
RGD100 – 2B Gas Governor DN100 2 bar
7 Vent cap 20 Body
Filtering ≤ 50μm – Viledon cartridge 8 Upper cover 21 Sensing tube
RGD65 – FT – 2B Gas Governor with filter DN65 2 bar 9 Plastic Washer 22 Seal washer
Inlet - Outlet Flanged connection DN65
RGD80 – FT – 2B Gas Governor with filter DN80 2 bar Connection DN80 - DN100 - PN16 10 Safety diaphragm 23 Plastic ring
11 Calibrated nozzle 24 Gasket
RGD100 – FT – 2B Gas Governor with filter DN100 2 bar Test point Inlet / outlet on request – Test point 1/8” NPT 12 Washer 25 Cover
13 Disc 26 Nut
RGD65 – 2B - TPIO Gas Governor with test point in/out DN65 2 bar Working Temperature - 20 °C – + 60 °C 14 Compensation diaphragm 27 Filter cartidge
Use Not aggressive gases of three families – Natural Gas – LPG – 28 Screw cover
RGD80 – 2B - TPIO Gas Governor with test point in/out DN80 2 bar
Town Gas
RGD100 – 2B - TPIO Gas Governor with test point in/out DN100 2 bar
Approval UNI EN 88-2:2008
427 mm Ø 320 mm
RGD65 – FT – 2B - TPIO Gas Governor with filter and test point in/out DN65 2 bar
RGD80 – FT – 2B - TPIO Gas Governor with filter and test point in/out DN80 2 bar Materials:
180 mm
RGD100 – FT – 2B - TPIO Gas Governor with filter and test point in/out DN100 2 bar Complete Body Die – Cast Aluminium Gd – AlSi12Cu - EN AB 46100

440 mm
Diaphragms NBR 60Sh – DvGW EN 549

Plastic components White POM / Pa 66 + 25% Gf

260 mm

Spring Range: Color Range mbar

White 5 - 14 mbar
Yellow 6 - 22 mbar
Neutral 10 - 27 mbar
Dimension DN65 DN80 DN100
Red 28 - 70 mbar
Black 60 - 130 mbar WEIGHT (kgs) 16 15,3 14,6

32 33
 GAS GOVERNORS

ASSEMBLY OVERVIEW SPRING RANGE

1

7
6

10
White spring – Range 5 – 14 mbar Red spring –Range 28 – 70 mbar
11
Gas governor pmax 500 mbar Gas governor pmax 500 mbar
26
12 SPW1-5 RG015 - RG020 - RG025 SPR1-5 RG015 - RG020 - RG025
13 SPW2-5 RG032 - RG040 SPR2-5 RG032 - RG040
SPW3-5 RG050 SPR3-5 RG050
SPW4-5 RGD65 - RGD80 - RGD100 SPR4-5 RGD65 - RGD80 - RGD100
15 14
Gas governor 1 bar – 2 bar Gas governor 1 bar – 2 bar
16
SPW1 – 12 RG015 - 1B/2B – RG020 - 1B/2B – RG025 - 1B/2B SPR1 – 12 RG015 - 1B/2B – RG020 - 1B/2B – RG025 - 1B/2B
SPW2 – 12 RG032 - 1B/2B – RG040 - 1B/2B SPR2 – 12 RG032 - 1B/2B – RG040 - 1B/2B
17 SPW3 – 12 RG050 - 1B/2B SPR3 – 12 RG050 - 1B/2B
SPW4 – 12 RGD65 - 1B/2B – RGD80 - 1B/2B – RGD100 - 1B/2B SPR4 – 12 RGD65 - 1B/2B – RGD80 - 1B/2B – RGD100 - 1B/2B
1 Seal cap
2 O ring Yellow spring – Range 6 – 22 mbar Black spring – Range 60 – 130 mbar
18
3 Spring compressor Gas governor pmax 500 mbar Gas governor pmax 500 mbar
19 4 Washer
21 6 Screws SPY1-5 RG015 - RG020 - RG025 SPBK1-5 RG015 - RG020 - RG025
7 Vent cap SPY2-5 RG032 - RG040 SPBK2-5 RG032 - RG040
SPY3-5 RG050 SPBK3-5 RG050
8 Upper cover
SPY4-5 RGD65 - RGD80 - RGD100 SPBK4-5 RGD65 - RGD80 - RGD100
20 9 Plastic Washer
10 Safety diaphragm Gas governor 1 bar – 2 bar Gas governor 1 bar – 2 bar
11 Calibrated nozzle
SPY1 – 12 RG015 - 1B/2B – RG020 - 1B/2B – RG025 - 1B/2B SPBK2 – 12 RG032 - 1B/2B – RG040 - 1B/2B
12 Washer SPY2 – 12 RG032 - 1B/2B – RG040 - 1B/2B SPBK3 – 12 RG050 - 1B/2B
13 Disc SPY3 – 12 RG050 - 1B/2B SPBK4 – 12 RGD65 - 1B/2B – RGD80 - 1B/2B – RGD100 - 1B/2B
22 14 Compensation diaphragm SPY4 – 12 RGD65 - 1B/2B – RGD80 - 1B/2B – RGD100 - 1B/2B
15 Shaft
16 Upper bush Neutral spring –Range 10 – 27 mbar (Standar spring) Blue spring – Range 120 – 300 mbar
23
17 Disc Gas governor pmax 500 mbar Gas governor pmax 500 mbar
24 18 Working diaphragm
27 SPN1-5 RG015 - RG020 - RG025 SPB1-5 RG015 - RG020 - RG025
19 Lower bush
SPN2-5 RG032 - RG040 SPB2-5 RG032 - RG040
20 Body SPN3-5 RG050 SPB3-5 RG050
25
21 Sensing tube SPN4-5 RGD65 - RGD80 - RGD100 SPB4-5 RGD65 - RGD80 - RGD100
22 Seal washer
Gas governor 1 bar – 2 bar Gas governor 1 bar – 2 bar
23 Plastic ring
24 Gasket SPN1 – 12 RG015 - 1B/2B – RG020 - 1B/2B – RG025 - 1B/2B
25 Cover SPN2 – 12 RG032 - 1B/2B – RG040 - 1B/2B
Actually not available
26 Nut SPN3 – 12 RG050 - 1B/2B
27 Filter cartidge SPN4 – 12 RGD65 - 1B/2B – RGD80 - 1B/2B – RGD100 - 1B/2B
34 35
 GAS GOVERNORS

GAS GOVERNORS - Standar version

Gas Governor - Pmax 1 bar Gas Governor - Pmax 2 bar

Code Description Dimension Pmax Code Description Dimension Pmax

RG015-1B Gas Governor ½” 1 bar RG015-2B Gas Governor ½” 2 bar
RG020-1B Gas Governor ¾” 1 bar RG020-2B Gas Governor ¾” 2 bar
RG025-1B Gas Governor 1” 1 bar RG025-2B Gas Governor 1” 2 bar
RGD25-1B Gas Governor DN25 1 bar RGD25-2B Gas Governor 1” 2 bar

RG015-FT-1B Gas Governor with filter ½” 1 bar RG015-FT-2B Gas Governor with filter ½” 2 bar
RG020-FT-1B Gas Governor with filter ¾” 1 bar RG020-FT-2B Gas Governor with filter ¾” 2 bar
RG025-FT-1B Gas Governor with filter 1” 1 bar RG025-FT-2B Gas Governor with filter 1” 2 bar
RGD25-FT-1B Gas Governor with filter DN25 1 bar RGD25-FT-2B Gas Governor with filter DN25 2 bar

Code Description Dimension Pmax Code Description Dimension Pmax

RG032-1B Gas Governor 1 ¼” 1 bar RG032-2B Gas Governor 1 ¼” 2 bar
RG040-1B Gas Governor 1 ½” 1 bar RG040-2B Gas Governor 1 ½” 2 bar
RGD32-1B Gas Governor DN32 1 bar RGD32-2B Gas Governor DN32 2 bar
Gas Governor - Pmax 500 mbar
RGD40-1B Gas Governor DN40 1 bar RGD40-2B Gas Governor DN40 2 bar
Code Description Dimension Pmax Code Description Dimension Pmax
RG015 Gas Governor ½” 500 mbar RG050 Gas Governor 2” 500 mbar RG032-FT-1B Gas Governor with filter 1 ¼” 1 bar RG032-FT-2B Gas Governor with filter 1 ¼” 2 bar
RG020 Gas Governor ¾” 500 mbar RGD50 Gas Governor DN50 500 mbar RG040-FT-1B Gas Governor with filter 1 ½” 1 bar RG040-FT-2B Gas Governor with filter 1 ½” 2 bar
RG025 Gas Governor 1” 500 mbar RGD32-FT-1B Gas Governor with filter DN32 1 bar RGD32-FT-2B Gas Governor with filter DN32 2 bar
RGD25 Gas Governor DN25 500 mbar RG050-FT Gas Governor with filter 2” 500 mbar RGD40-FT-1B Gas Governor with filter DN40 1 bar RGD40-FT-2B Gas Governor with filter DN40 2 bar
RGD50-FT Gas Governor with filter DN50 500 mbar
RG015-FT Gas Governor with filter ½” 500 mbar
RG020-FT Gas Governor with filter ¾” 500 mbar Code Description Dimension Pmax Code Description Dimension Pmax

RG025-FT Gas Governor with filter 1” 500 mbar RG050-1B Gas Governor 2” 1 bar RG050-2B Gas Governor 2” 2 bar

RGD25-FT Gas Governor with filter DN25 500 mbar RGD50-1B Gas Governor DN50 1 bar RGD50-2B Gas Governor DN50 2 bar

RG050-FT-1B Gas Governor with filter 2” 1 bar RG050-FT-2B Gas Governor with filter 2” 2 bar
Code Description Dimension Pmax Code Description Dimension Pmax RGD50-FT-1B Gas Governor with filter DN50 1 bar RGD50-FT-2B Gas Governor with filter DN50 2 bar
RG032 Gas Governor 1¼” 500 mbar RGD65 Gas Governor DN65 500 mbar
RG040 Gas Governor 1 ½” 500 mbar RGD80 Gas Governor DN80 500 mbar
Code Description Dimension Pmax Code Description Dimension Pmax
RGD32 Gas Governor DN32 500 mbar RGD100 Gas Governor DN100 500 mbar
RGD65 - 1B Gas Governor DN65 1 bar RGD65 – 2B Gas Governor DN65 2 bar
RGD40 Gas Governor DN40 500 mbar
RGD65 - FT Gas Governor with filter DN65 500 mbar RGD80 - 1B Gas Governor DN80 1 bar RGD80 – 2B Gas Governor DN80 2 bar
RGD80 - FT Gas Governor with filter DN80 500 mbar RGD100 - 1B Gas Governor DN100 1 bar RGD100 – 2B Gas Governor DN100 2 bar
RG032-FT Gas Governor with filter 1¼” 500 mbar
RGD100 - FT Gas Governor with filter DN100 500 mbar
RG040-FT Gas Governor with filter 1 ½” 500 mbar RGD65 - FT - 1B Gas Governor with filter DN65 1 bar RGD65 – FT – 2B Gas Governor with filter DN65 2 bar
RGD32-FT Gas Governor with filter DN32 500 mbar RGD80 - FT - 1B Gas Governor with filter DN80 1 bar RGD80 – FT – 2B Gas Governor with filter DN80 2 bar
RGD40-FT Gas Governor with filter DN40 500 mbar RGD100 - FT - 1B Gas Governor with filter DN100 1 bar RGD100 – FT – 2B Gas Governor with filter DN100 2 bar

36 37
 GAS GOVERNORS

GAS GOVERNORS - TPIO code - Test point input / ouput

Gas Governor - Pmax 1 bar Gas Governor - Pmax 2 bar

Code Description Dimension Pmax Code Description Dimension Pmax

RG015-1B-TPIO Gas Governor with test point in/out ½” 1 bar RG015-2B-TPIO Gas Governor with test point in/out 1¼” 2 bar
RG020-1B-TPIO Gas Governor with test point in/out ¾” 1 bar RG020-2B-TPIO Gas Governor with test point in/out 1 ½” 2 bar
RG025-1B-TPIO Gas Governor with test point in/out 1” 1 bar RG025-2B-TPIO Gas Governor with test point in/out DN32 2 bar

RG015-FT-1B-TPIO Gas Governor with filter and test point in/out ½” 1 bar RG015-FT-2B-TPIO Gas Governor with filter and test point in/out 1 ¼ ” 2 bar
RG020-FT-1B-TPIO Gas Governor with filter and test point in/out ¾” 1 bar RG020-FT-2B-TPIO Gas Governor with filter and test point in/out 1 ½” 2 bar
RG025-FT-1B-TPIO Gas Governor with filter and test point in/out 1” 1 bar RG025-FT-2B-TPIO Gas Governor with filter and test point in/out DN32 2 bar

TEST POINT
Code Description Dimension Pmax Code Description Dimension Pmax
RG032-1B-TPIO Gas Governor with test point in/out 1 ¼” 1 bar RG032-2B-TPIO Gas Governor with test point in/out 1 ¼” 2 bar
RG040-1B-TPIO Gas Governor with test point in/out 1 ½” 1 bar RG040-2B-TPIO Gas Governor with test point in/out 1 ½” 2 bar
RGD32-1B-TPIO Gas Governor with test point in/out DN32 1 bar RGD32-2B-TPIO Gas Governor with test point in/out DN32 2 bar
RGD40-1B-TPIO Gas Governor with test point in/out DN40 1 bar RGD40-2B-TPIO Gas Governor with test point in/out DN40 2 bar
Gas Governor - Pmax 500 mbar

Code Description Dimension Pmax Code Description Dimension Pmax RG032-FT-1B-TPIO Gas Governor with filter and test point in/out 1 ¼” 1 bar RG032-FT-2B-TPIO Gas Governor with filter test point in/out 1 ¼” 2 bar

RG015-TPIO Gas Governor with test point in/out ½” 500 mbar RG050-TPIO Gas Governor with test point in/out 2” 500 mbar RG040-FT-1B-TPIO Gas Governor with filter and test point in/out 1 ½” 1 bar RG040-FT-2B-TPIO Gas Governor with filter test point in/out 1 ½” 2 bar

RG020-TPIO Gas Governor with test point in/out ¾” 500 mbar RGD50-TPIO Gas Governor with test point in/out DN50 500 mbar RGD32-FT-1B-TPIO Gas Governor with filter and test point in/out DN32 1 bar RGD32-FT-2B-TPIO Gas Governor with filter test point in/out DN32 2 bar

RG025-TPIO Gas Governor with test point in/out 1” 500 mbar RGD40-FT-1B-TPIO Gas Governor with filter and test point in/out DN40 1 bar RGD40-FT-2B-TPIO Gas Governor with filter test point in/out DN40 2 bar

RGD25-TPIO Gas Governor with test point in/out DN25 500 mbar RG050-FT-TPIO Gas Governor with filter and test point in/out 2” 500 mbar
RGD50-FT-TPIO Gas Governor with filter and test point in/out DN50 500 mbar
RG015-FT-TPIO Gas Governor with filter and test point in /out ½” 500 mbar Code Description Dimension Pmax Code Description Dimension Pmax
RG020-FT-TPIO Gas Governor with filter and test point in /out ¾” 500 mbar RG050-1B-TPIO Gas Governor with test point in/out 2” 1 bar RG050-2B-TPIO Gas Governor with test point in/out 2” 2 bar
RG025-FT-TPIO Gas Governor with filter and test point in /out 1” 500 mbar RGD50-1B-TPIO Gas Governor with test point in/out DN50 1 bar RGD50-2B-TPIO Gas Governor with test point in/out DN50 2 bar
RGD25-FT-TPIO Gas Governor with filter and test point in /out DN25 500 mbar

RG050-FT-1B-TPIO Gas Governor with filter and test point in /out 2” 1 bar RG050-FT-2B-TPIO Gas Governor with filter and test point in/out 2” 2 bar
RGD50-FT-1B-TPIO Gas Governor with filter and test point in /out DN50 1 bar RGD50-FT-2B-TPIO Gas Governor with filter and test point in/out DN50 2 bar
Code Description Dimension Pmax Code Description Dimension Pmax
RG032-TPIO Gas Governor with test point in/out 1¼” 500 mbar RGD65 - TPIO Gas Governor with test point in/out DN65 500 mbar
RG040-TPIO Gas Governor with test point in/out 1½” 500 mbar RGD80 - TPIO Gas Governor with test point in/out DN80 500 mbar
Code Description Dimension Pmax Code Description Dimension Pmax
RGD32-TPIO Gas Governor with test point in/out DN32 500 mbar RGD100 - TPIO Gas Governor with test point in/out DN100 500 mbar
RGD65 - 1B - TPIO Gas Governor with test point in/out DN65 1 bar RGD65 – 2B - TPIO Gas Governor with test point in/out DN65 2 bar
RGD40-TPIO Gas Governor with test point in/out DN40 500 mbar
RGD65 - FT - TPIO Gas Governor with filter and test point in/out DN65 500 mbar RGD80 - 1B - TPIO Gas Governor with test point in/out DN80 1 bar RGD80 – 2B - TPIO Gas Governor with test point in/out DN80 2 bar
RGD80 - FT - TPIO Gas Governor with filter and test point in/out DN80 500 mbar RGD100 - 1B - TPIO Gas Governor with test point in/out DN100 1 bar RGD100 – 2B - TPIO Gas Governor with test point in/out DN100 2 bar
RG032-FT-TPIO Gas Governor with filter and test point in/out 1¼” 500 mbar
RGD100 - FT - TPIO Gas Governor with filter and test point in/out DN100 500 mbar
RG040-FT-TPIO Gas Governor with filter and test point in/out 1½” 500 mbar RGD65 - FT - 1B - TPIO Gas Governor with filter and test point in/out DN65 1 bar RGD65 – FT – 2B - TPIO Gas Governor with filter and test point in/out DN65 2 bar
RGD32-FT-TPIO Gas Governor with filter and test point in/out DN32 500 mbar RGD80 - FT - 1B - TPIO Gas Governor with filter and test point in/out DN80 1 bar RGD80 – FT – 2B - TPIO Gas Governor with filter and test point in/out DN80 2 bar
RGD40-FT-TPIO Gas Governor with filter and test point in/out DN32 500 mbar RGD100 - FT - 1B - TPIO Gas Governor with filter and test point in/out DN100 1 bar RGD100 – FT – 2B - TPIO Gas Governor with filter and test point in/out DN100 2 bar

38 39
 GAS GOVERNORS

CODE DESCRIPTION Gas Governor ½”, ¾”, 1”

Pressure drops (mbar) Capacity Q (Nmc/h)

RG015-FT-1B
1 2 3 4

1 GAS GOVERNOR: 2 DIMENSIONS:

RG=Threaded connections 015 = 1/2”

RGD=Flanged connections 020 = 3/4”
025= 1”
25= DN25
032= 11/4 ”
3 OPTIONAL: 4 BAR: 32= DN32
-FT= With Filter =500mbar 040= 1 1/2”
-1B=1bar 40= DN40
-2B=2bar 050= 2”
50= DN50
65 = DN65
80 = DN80
100 = DN100

PACKING DIMENSION
Code Packaging Dimension (LxWxH) cm Weight dimension (Kg) Packaging
RG015 – RG020 – RG025 63x24x18 7,4 10 units
RG032 – RG040 22x20x26 3,4 1 unit
RG050 27x28x32 6 1 unit
RGD65 – RGD80 – RGD100 44x34x46 16,2 - 15,5 - 14,8 1 unit

Natural gas CH4 (d=0,544)

Air (d=1)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)
40 41
 GAS GOVERNORS

Gas Governor 1 ¼”, 1 ½” Gas Governor 2”

Capacity Q (Nmc/h) Pressure drops (mbar) Pressure drops (mbar) Capacity Q (Nmc/h)
Air (d=1)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)

Natural gas CH4 (d=0,544)

Natural gas CH4 (d=0,544)

Air (d=1)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)
42 43
 GAS GOVERNORS

Gas Governor DN65, DN80, DN100 Gas Governor with filter ½”, ¾”, 1”
Capacity Q (Nmc/h) Pressure drops (mbar) Pressure drops (mbar) Capacity Q (Nmc/h)
Air (d=1)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)

Natural gas CH4 (d=0,544)

Natural gas CH4 (d=0,544)

Air (d=1)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)
44 45
 GAS GOVERNORS

Gas Governor with filter 1 ¼”, 1 ½” Gas Governor with filter 2”

Capacity Q (Nmc/h) Pressure drops (mbar) Pressure drops (mbar) Capacity Q (Nmc/h)
Air (d=1)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)

Natural gas CH4 (d=0,544)

Natural gas CH4 (d=0,544)

Air (d=1)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)
46 47
 GAS GOVERNORS

Gas Governor with filter DN65, DN80, DN100 Special versions

Capacity Q (Nmc/h) Pressure drops (mbar)

Geca can produces gas governor with different connection specific for the
different markets and applications. This solutions are on request.

Electronic pressure gauge

Pressure gauges measure negative pressure, positive pressure and TECHNICAL FEATURES
differential pressure of non-aggressive, gaseous. The manometer is used
in production and extraction systems to measure different pressures or the Power supply 1 9V alcalyne battery model 6LR61
pressure drop in gas flows. It is also used to check inlet and outlet pressure of
Battery life 25÷30 hours (constantly working)
gas governor, it is an ideal aid for adjusting burners, e.g. to check the burner
pressure and the gas/air ratio etc. Range: 0-100 mbar
Air (d=1)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)

Natural gas CH4 (d=0,544)

Resolution scale: ±0,1 mmH2O up to 200 mmH2O, ±1 mmH2O from

200 mmH2O up to 1000 mmH2O

Accuracy: ±1%

Max. working
pressure: 750 mbar

48 49
 Gas Filters
GAS FILTER ½”, ¾”, 1” – Small capacity – Pmax 6 bar p. 52

GAS FILTER ½”, ¾”, 1” – Pmax 6 bar p. 54

Gas Filters
GAS FILTER 1 ¼”, 1 ½” and 2” – Pmax 6 bar p. 56
›› Gas filters can be used for all the types of natural
gas, LPG or not corrosive gases. These filters are GAS FILTER DN65 – DN80 – DN100 – Pmax 6 bar p. 58
widely used for protection of control devices, pressure
regulators, meters and on systems that requiring an GAS FILTER DN125 – DN150 – Pmax 6 bar p. 60
high degree of filtration.

51
 GAS FILTERS

GAS FILTER ½”, ¾”, 1” – Small capacity – Pmax 6 bar

1

2
3

Code Description Dimension Pmax TECHNICAL FEATURES 1 Test point connection

2 Seal O ring
GF015SC Gas filter small capacity ½” 6 bar Operation maximum pressure 6 bar / available version 10 bar 3 Filter cartridge
GF020SC Gas filter small capacity ¾” 6 bar 4 Body
Working Temperature - 20 °C – + 60 °C
5 Cover
GF025SC Gas filter small capacity 1” 6 bar
Filtration ≤ 50 Micron

Use Non – aggressive gases – Family 1 – 2 – 3 and air

Cartridge element Plastic cartidge PP

Connection ½” – ¾” – 1” Wall boiler – ISO 228

Complete Body Die – Cast Aluminium Gd – AlSi12Cu – EN AB 46100

Seals NBR

Approval PED
72 mm

65 mm
60 mm
Dimension ½” ¾” 1”
WEIGHT (kgs) 0,221 0,212 0,199

52 53
 GAS FILTERS

GAS FILTER ½”, ¾”, 1” – Pmax 6 bar

1
5

›› .....
Code Description Dimension Pmax TECHNICAL FEATURES 1 Test point connection
2 Seal O ring
GF015 Gas filter ½” 6 bar Operation maximum pressure 6 bar / available version 10 bar 3 Filter cartridge
GF020 Gas filter ¾” 6 bar 4 Body
Working Temperature - 20 °C – + 60 °C
5 Cover
GF025 Gas filter 1” 6 bar
Filtration 50 Micron
GFD25 Gas filter DN25 6 bar
Use Non – aggressive gases – Family 1 – 2 – 3 and air

Cartridge element Viledon cartridge

GF015-TPIO Gas filter with test point in/out ½” 6 bar
GF020-TPIO Gas filter with test point in/out ¾” 6 bar Inlet - Outlet Theread gas 1/2” – ¾” 1” – ISO 228
Connection DN25 - Sliding Aluminium flange PN10
GF025-TPIO Gas filter with test point in/out 1” 6 bar
Complete Body Die – Cast Aluminium Gd – AlSi12Cu - EN AB 46100
GFD25-TPIO Gas filter with test point in/out DN25 6 bar
Seals NBR
116 mm
GF015-SP Gas filter with screw plugs ½” 6 bar Approval PED
GF020-SP Gas filter with screw plugs ¾” 6 bar
GF025-SP Gas filter with screw plugs 1” 6 bar Optional:

GFD25-SP Gas filter with screw plugs DN25 6 bar - Test point – NPT ¼”

119 mm
104 mm
- Screw – NPT ¼”

- Peters plug

- Manometer

- DP clogging indicator

Dimension ½” ¾” 1”
WEIGHT (kgs) 0,806 0,795 0,786

54 55
 GAS FILTERS

GAS FILTER 1 ¼”, 1 ½” and 2” – Pmax 6 bar

›› .....
Code Description Dimension Pmax TECHNICAL FEATURES 1 Test point connection
2 Seal O ring
GF032 Gas filter 1 ¼” 6 bar Operation maximum pressure 6 bar / available version 10 bar 3 Filter cartridge
GF040 Gas filter 1 ½” 6 bar 4 Body
Working Temperature - 20 °C – + 60 °C
5 Cover
GF050 Gas filter 2” 6 bar
Filtration 50 Micron
GFD32 Gas filter DN32 6 bar
Use Non – aggressive gases – Family 1 – 2 – 3 and air
GFD40 Gas filter DN40 6 bar
Cartridge element Viledon cartridge
GFD50 Gas filter DN50 6 bar
Inlet - Outlet Thread gas 1 ¼” 1 ½” 2” – ISO 228
Connection DN32 DN40 DN50 - Sliding Aluminium flange PN10
GF032-TPIO Gas filter with test point in/out 1 ¼” 6 bar
Complete Body Die – Cast Aluminium Gd – AlSi12Cu - EN AB 46100
GF040-TPIO Gas filter with test point in/out 1 ½” 6 bar
GF050-TPIO Gas filter with test point in/out 2” 6 bar Seals NBR

GFD32-TPIO Gas filter with test point in/out DN32 6 bar Approval PED 164 mm

GFD40-TPIO Gas filter with test point in/out DN40 6 bar

GFD50-TPIO Gas filter with test point in/out DN50 6 bar
Optional:

- Test point – NPT ¼”

155 mm
132 mm
GF032-SP Gas filter with screw plugs 1 ¼” 6 bar
GF040-SP Gas filter with screw plugs 1 ½” 6 bar - Screw – NPT ¼”

GF050-SP Gas filter with screw plugs 2” 6 bar - Peters plug

GFD32-SP Gas filter with screw plugs DN32 6 bar
- Manometer
GFD40-SP Gas filter with screw plugs DN40 6 bar
GFD50-SP Gas filter with screw plugs DN50 6 bar - DP clogging indicator
Dimension 1 ¼” 1 ½” 2”
WEIGHT (kgs) 1,63 1,55 1,45

56 57
 GAS FILTERS

GAS FILTER DN65 – DN80 – DN100 – Pmax 6 bar

›› .....
Code Description Dimension Pmax TECHNICAL FEATURES 1 Test point connection
2 Seal O ring
GFD65 Gas filter DN65 6 bar Operation maximum pressure 6 bar / available version 10 bar 3 Filter cartridge
GFD80 Gas filter DN80 6 bar 4 Body
Working Temperature - 20 °C – + 60 °C
5 Cover
GFD100 Gas filter DN100 6 bar
Filtration 50 Micron

Use Non – aggressive gases – Family 1 – 2 – 3 and air

GFD65-TPIO Gas filter with test point in/out DN65 6 bar
Cartridge element Viledon cartridge
GFD80-TPIO Gas filter with test point in/out DN80 6 bar
GFD100-TPIO Gas filter with test point in/out DN100 6 bar Connection Flanged PN16 – DN65 – DN80 – DN100

Complete Body Aluminium EN AC 43100

GFD65-SP Gas filter with screw plugs DN65 6 bar
Seals NBR
GFD80-SP Gas filter with screw plugs DN80 6 bar
Approval PED
GFD100-SP Gas filter with screw plugs DN100 6 bar 253 mm

Optional:

- Test point – NPT ¼”

- Screw – NPT ¼”

185 mm

185 mm
- Peters plug

- Manometer

- DP clogging indicator

Dimension DN65 DN80 DN100

WEIGHT (kgs) 8,30 8,30 9,50

58 59
 GAS FILTERS

GAS FILTER DN125 – DN150 – Pmax 6 bar

5
1

›› .....
Code Description Dimension Pmax TECHNICAL FEATURES 1 Test point connection
2 Seal O ring
GFD125 Gas filter DN125 6 bar Operation maximum pressure 6 bar 3 Filter cartridge
GFD150 Gas filter DN150 6 bar 4 Body
Working Temperature - 20 °C – + 60 °C
5 Cover
Filtration 50 Micron
GFD125-TPIO Gas filter with test point in/out DN125 6 bar
Use Non – aggressive gases – Family 1 – 2 – 3 and air
GFD150-TPIO Gas filter with test point in/out DN150 6 bar
Cartridge element Viledon cartridge

GFD125-SP Gas filter with screw plugs DN125 6 bar Connection Flanged PN16 – DN125 – DN150

GFD150-SP Gas filter with screw plugs DN150 6 bar Complete Body Aluminium EN AC 43100

Seals NBR

Approval PED
445 mm

Optional:

- Test point – NPT ¼”

- Screw – NPT ¼”

155 mm
350 mm
- Peters plug

- Manometer

- DP clogging indicator

Dimension DN125 DN150

WEIGHT (kgs) 23 21

60 61
 GAS FILTERS

ASSEMBLY OVERVIEW CODE DESCRIPTION

GFD050-TPIO-10B

1 2 3 4 5

1 GF=GAS FILTER 3 DIMENSIONS:

4
015SC =1/2” (Small Capacity)
5
020SC =3/4” (Small Capacity)
2 CONNECTION: 025SC = 1” (Small Capacity)
015 = 1/2”
=Threaded 020 = 3/4”
D= Flanged 025= 1”
25= DN25
032= 1 1/4”
4 OPTIONAL: 32= DN32
040= 1 1/2”
SP= Screw Plugs 40= DN40
3 TPIO=Test Point IN/OUT 050= 2”
50= DN50
65= DN65
5 BAR: 80 = DN80
2 100= DN100
= 6bar 125= DN125
-10B= 10bar 150= DN150

1 Body
2 Filter
3 O ring
4 Cover
5 Screws

PACKING DIMENSION
Code Packaging Dimension (LxWxH) cm Weight dimension (Kg) Packaging
GF015SC – GF020SC – GF025SC 29,5x41x14 11,6 46 units
GF015 – GF020 – GF025 65x26x17 9,4 10 units
GF032 – GF040 – GF050 17x16x16,5 2 1 unit
1
GFD32 – GFD40 – GFD50 23,5x28,5x25 4,4 1 unit
GFD65 – GFD80 23,5x28,5x25 5,4 1 unit
GFD100 23,5x28,5x25 6,2 1 unit
GFD125 46x36x55 21,5 1 unit
GFD150 46x36x55 23,5 1 unit

62 63
 GAS FILTERS

GAS FILTER Standar version GAS FILTER Test Point Inlet / Outlet version - TPIO

Code Description Dimension Pmax Code Description Dimension Pmax Code Description Dimension Pmax Code Description Dimension Pmax
GF015 Gas filter ½” 6 bar GFD65 Gas filter DN65 6 bar GF015-TPIO Gas filter with test point in/out ½” 6 bar GFD65-TPIO Gas filter with test point in/out DN65 6 bar
GF020 Gas filter ¾” 6 bar GFD80 Gas filter DN80 6 bar GF020-TPIO Gas filter with test point in/out ¾” 6 bar GFD80-TPIO Gas filter with test point in/out DN80 6 bar
GF025 Gas filter 1” 6 bar GFD100 Gas filter DN100 6 bar GF025-TPIO Gas filter with test point in/out 1” 6 bar GFD100-TPIO Gas filter with test point in/out DN100 6 bar
GFD25 Gas filter DN25 6 bar GFD25-TPIO Gas filter with test point in/out DN25 6 bar

Code Description Dimension Pmax Code Description Dimension Pmax Code Description Dimension Pmax Code Description Dimension Pmax
GF032 Gas filter 1 ¼” 6 bar GFD125 Gas filter DN125 6 bar GF032-TPIO Gas filter with test point in/out 1 ¼” 6 bar GFD125-TPIO Gas filter with test point in/out DN125 6 bar
GF040 Gas filter 1 ½” 6 bar GFD150 Gas filter DN150 6 bar GF040-TPIO Gas filter with test point in/out 1 ½” 6 bar GFD150-TPIO Gas filter with test point in/out DN150 6 bar
GF050 Gas filter 2” 6 bar GF050-TPIO Gas filter with test point in/out 2” 6 bar
GFD32 Gas filter DN32 6 bar GFD32-TPIO Gas filter with test point in/out DN32 6 bar
GFD40 Gas filter DN40 6 bar GFD40-TPIO Gas filter with test point in/out DN40 6 bar
GFD50 Gas filter DN50 6 bar GFD50-TPIO Gas filter with test point in/out DN50 6 bar

64 65
 GAS FILTERS

GAS FILTER Screw plugs version - SP GAS FILTER Peterson plugs version - PP

Code Description Dimension Pmax Code Description Dimension Pmax Code Description Dimension Pmax Code Description Dimension Pmax
GF015-SP Gas filter with screw plugs ½” 6 bar GFD65-SP Gas filter with screw plugs DN65 6 bar GF015-PP Gas filter with Peterson Plug ½” 6 bar GFD65-PP Gas filter with Peterson Plug DN65 6 bar
GF020-SP Gas filter with screw plugs ¾” 6 bar GFD80-SP Gas filter with screw plugs DN80 6 bar GF020-PP Gas filter with Peterson Plug ¾” 6 bar GFD80-PP Gas filter with Peterson Plug DN80 6 bar
GF025-SP Gas filter with screw plugs 1” 6 bar GFD100-SP Gas filter with screw plugs DN100 6 bar GF025-PP Gas filter with Peterson Plug 1” 6 bar GFD100-PP Gas filter with Peterson Plug DN100 6 bar
GFD25-SP Gas filter with screw plugs DN25 6 bar GFD25-PP Gas filter with Peterson Plug DN25 6 bar

Code Description Dimension Pmax Code Description Dimension Pmax

Code Description Dimension Pmax Code Description Dimension Pmax
GF032-PP Gas filter with Peterson Plug 1 ¼” 6 bar GFD125-PP Gas filter with Peterson Plug DN125 6 bar
GF032-SP Gas filter with screw plugs 1 ¼” 6 bar GFD125-SP Gas filter with screw plugs DN125 6 bar
GF040-PP Gas filter with Peterson Plug 1 ½” 6 bar GFD150-PP Gas filter with Peterson Plug DN150 6 bar
GF040-SP Gas filter with screw plugs 1 ½” 6 bar GFD150-SP Gas filter with screw plugs DN150 6 bar
GF050-PP Gas filter with Peterson Plug 2” 6 bar
GF050-SP Gas filter with screw plugs 2” 6 bar
GFD32-PP Gas filter with Peterson Plug DN32 6 bar
GFD32-SP Gas filter with screw plugs DN32 6 bar
GFD40-PP Gas filter with Peterson Plug DN40 6 bar
GFD40-SP Gas filter with screw plugs DN40 6 bar
GFD50-PP Gas filter with Peterson Plug DN50 6 bar
GFD50-SP Gas filter with screw plugs DN50 6 bar

66 67
 GAS FILTERS

GAS FILTER SC ½”, ¾”, 1” GAS FILTER ½”, ¾”, 1”

Capacity Q (Nmc/h) Pressure drops (mbar) Pressure drops (mbar) Capacity Q (Nmc/h)
Natural gas CH4 (d=0,544)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)

Air (d=1)

Natural gas CH4 (d=0,544)

Air (d=1)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)
68 69
 GAS FILTERS

GAS FILTER 1 ¼”, 1 ½”, 2” GAS FILTER DN65, DN80, DN100

Capacity Q (Nmc/h) Pressure drops (mbar) Pressure drops (mbar) Capacity Q (Nmc/h)
Natural gas CH4 (d=0,544)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)

Air (d=1)

Natural gas CH4 (d=0,544)

Air (d=1)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)
70 71
 GAS FILTERS GAS FILTERS

GAS FILTER DN125 -DN150 DP CLOGGING INDICATOR

Capacity Q (Nmc/h) Pressure drops (mbar)

DP CLOGGING INDICATOR DP CLOGGING INDICATOR with reed switch.

Code Description Connection Range Code Description Connection Range
DPI-150 Aluminium body - PN20 ¼” 0 – 150 mbar DPI-150 - RS Aluminium body - PN20 ¼” 0 – 150 mbar
DPI-300 Aluminium body - PN20 ¼” 0 – 300 mbar DPI-300 - RS Aluminium body - PN20 ¼” 0 – 300 mbar
DPI-600 Aluminium body – PN20 ¼” 0 – 600 mbar DPI-600 - RS Aluminium body – PN20 ¼” 0 – 600 mbar
DPI-1000 Aluminium body – PN20 ¼” 0 – 1000 mbar DPI-1000 - RS Aluminium body – PN20 ¼” 0 – 1000 mbar

FILTER CARTRIDGE

Our filter cartridge is in Viledon with Metallic grid and textile filter element

FILTER CARTRIDGE
Code Description Model
FC – 1 Filter cartridge 50 μm GF015SC - GF020SC - GF025SC
FC – 2 Filter cartridge 50μm GF015 - GF020 - GF025 –GFD25
Natural gas CH4 (d=0,544)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)

Air (d=1)

FC – 3 Filter cartridge 50 μm GF032 - GF040 - GF050 –GFD version

FC – 4 Filter cartridge 50 μm GFD65 – GFD80
FC – 5 Filter cartridge 50 μm GFD100
FC – 6 Filter cartridge 50 μm GFD125 – GFD150

72 73
 AUTOMATIC GAS SOLENOID VALVE ½”, ¾” p. 76

Automatic gas valve Brass Body

BRASS BODY - PMAX 200 MBAR

Automatic gas valve - Brass Body

›› Automatic gas solenoid valves are used for safety
and control of gas for shut-off in gas feed pipes.
Suitable for various gasses, including Natural gas,
Propane and LPG Gas solenoid valve normally closed
solenoid that open automatically when the coil is
powered and close automatically when there is no
tension.

75
 AU TOMATIC SOLENOID VA LVE S

Automatic gas solenoid valve ½”, ¾” - Brass Body - pmax 200 mbar

Metano
Pressure drops (mbar) Capacity Q (Nmc/h)

TECHNICAL FEATURES
Type Connections Flow (m3/h) Max pressure
Pmax 200 mbar
AV015 1/2" 4,5 200 mbar
AV020 3/4" 6 200 mbar Inlet connection - outlet Thread gas ½” ¾” and 1” - ISO 228

Opening time <1 second

Closing time <1 second

Max number of operations 30 per minute

DIMENSIONS (mm) and WEIGHT (kgs)
Dimension A B Ø Supply voltage 230V (-15%+10%) 50-60Hz
110V (-15%+10%) 50-60Hz
AV015 59 107 DN15 - ½’’ 24Vdc (-15%+10%) 50-60Hz
AVO20 59 107 DN20 - ¾’’
Power 15 VA
Coils to class F copper wire class H

Use Non – aggressive gases – Family 1 – 2 – 3 and air

Working Temperature - 20 °C – 60 °C

Approval EN161
B Protection degree IP65

φ
Materials:

Complete Body Brass ST-CW617N – EN 12420 – Yellow Painted

Natural gas CH4 (d=0,544)

Air (d=1)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)
A

Dimension ½” ¾”
WEIGHT (kgs) 0,8 0,8

76 77
 Automatic Gas Valves
AUTOMATIC GAS VALVES Fast Opening / Fast Closing p. 80
½”, ¾” and 1” – 360 mbar

Automatic Gas Valves -Pmax 360 mbar AUTOMATIC GAS VALVES Fast Opening / Fast Closing p. 82
1 ¼”, 1 ½” and 2” – 360 mbar
›› Automatic gas solenoid valves are used for safety
and control of gas for shut-off in gas feed pipes. AUTOMATIC GAS VALVES Fast Opening / Fast Closing p. 84
DN65, DN80, DN100 – 360 mbar
Suitable for various gasses, including Natural gas,
Propane and LPG Gas solenoid valve normally closed
solenoid that open automatically when the coil is
powered and close automatically when there is no
tension.

79
 AU TOMAT IC G A S VA LVE S

AUTOMATIC GAS VALVES Fast Opening / Fast Closing 13

½”, ¾” and 1” – Pmax 360 mbar 12
14

11
15

10

8
9

5
7

6
3

2
4

Code Description Dimension Pmax TECHNICAL FEATURES 1 Body 9 O-Ring

2 O-Ring 10 Coil
AV015FO Gas valve fast opening ½” 360 mbar Pmax 360 mbar
3 Cover 11 O-Ring
AV020FO Gas valve fast opening ¾” 360 mbar Inlet connection Thread gas ½” ¾” and 1” - ISO 228 4 Gasket 12 Washer
- outlet DN25 - Sliding Aluminium flange PN10 5 Plunger 13 Screw
AV025FO Gas valve fast opening 1” 360 mbar
6 Spring 14 Washer
AVD25FO Gas valve fast opening DN25 360 mbar Opening time <1 second 7 O-Ring 15 Connector
Closing time <1 second 8 Pilot

Max number of operations 20 per minute

AV015FO-FR Gas valve fast opening Flow regulation ½” 360 mbar
AV020FO-FR Gas valve fast opening Flow regulation ¾” 360 mbar Incorporated AISI 303 steel mesh filter on request

AV025FO-FR Gas valve fast opening Flow regulation 1” 360 mbar Supply voltage 230V (-15%+10%) 50-60Hz
110V (-15%+10%) 50-60Hz
AVD25FO-FR Gas valve fast opening Flow regulation DN25 360 mbar 24Vdc (-15%+10%) 50-60Hz

Power 15 VA
CPI-1 Control position indicator Coils to class F copper wire class H

149 mm

68 mm
Use Non – aggressive gases – Family 1 – 2 – 3 and air

Test point 3 connections

Screw ¼” NPT

Working Temperature - 20 °C – 60 °C

Approval EN161

Protection degree IP65

98 mm

Materials:

Complete Body Die – Cast Aluminium Gd – AlSi12Cu - EN AB 46100 Dimension ½” ¾” 1”

WEIGHT (kgs) 0,8 0,8 0,8

80 81
 AU TOMAT IC G A S VA LVE S

AUTOMATIC GAS VALVES Fast Opening / Fast Closing

1 ¼”, 1 ½” and 2” – Pmax 360 mbar
12
11

10

9
14

8
6 7

5
3

13

2 1

Code Description Dimension Pmax TECHNICAL FEATURES 1 Body 8 O-Ring

2 Screw Plugs 9 Pilot
AV032FO Gas valve fast opening 1 ¼” 360 mbar Pmax 360 mbar
3 O-Ring 10 Coil
AV040FO Gas valve fast opening 1 ½” 360 mbar Inlet connection Thread gas 1 ¼”, 1 ½” and 2” - ISO 228 4 Plunger 11 O-Ring
-outlet DN32 DN40 DN50 - Sliding Aluminium flange PN10 5 Spring 12 Locking Ring
AV050FO Gas valve fast opening 2” 360 mbar
6 Cover 13 Gasket
AVD32FO Gas valve fast opening DN32 360 mbar Opening time <1 second 7 Screw 14 Connector
Closing time <1 second
AVD40FO Gas valve fast opening DN40 360 mbar
Max number of operations 20 per minute
AVD50FO Gas valve fast opening DN50 360 mbar
Incorporated AISI 303 steel mesh filter on request

AV032FO-FR Gas valve fast opening Flow regulation 1 ¼” 360 mbar Supply voltage 230V (-15%+10%) 50-60Hz
110V (-15%+10%) 50-60Hz
AV040FO-FR Gas valve fast opening Flow regulation 1 ½” 360 mbar 24Vdc (-15%+10%) 50-60Hz
AV050FO-FR Gas valve fast opening Flow regulation 2” 360 mbar
Power 230Vac1
AVD32FO-FR Gas valve fast opening Flow regulation DN32 360 mbar 1/4"-11/2"-PeakPower40W- Maintain power4W
2"-Peakpower130W- Maintain power 1,5W

155 mm
AVD40FO-FR Gas valve fast opening Flow regulation DN40 360 mbar 245 mm
Coils to class F copper wire class H
AVD50FO-FR Gas valve fast opening Flow regulation DN50 360 mbar
Use Non – aggressive gases – Family 1 – 2 – 3 and air

Test point 5 connections

CPI-2 Control position indicator Screw ¼” NPT

Working Temperature - 20 °C – 60 °C
165 mm
Approval EN161

Protection degree IP65

Materials: Dimension 1 ¼” 1 ½” 2”
WEIGHT (kgs) 4,2 4,2 4,6
Complete Body Die – Cast Aluminium Gd – AlSi12Cu - EN AB 46100

82 83
 AU TOMAT IC G A S VA LVE S

AUTOMATIC GAS VALVES Fast Opening / Fast Closing - Coil encapsulated with
fibre-glass reinforced polyamide 1 ¼”, 1 ½” – Pmax 360 mbar
12
11

10

9
14

8
6 7

5
3

13

2 1

Code Description Dimension Pmax TECHNICAL FEATURES 1 Body 8 O-Ring

2 Screw Plugs 9 Pilot
AV032FO-EC Gas valve fast opening 1 ¼” 360 mbar Pmax 360 mbar
3 O-Ring 10 Coil
AV040FO-EC Gas valve fast opening 1 ½” 360 mbar Inlet connection Thread gas 1 ¼”, 1 ½” - ISO 228 4 Plunger 11 O-Ring
-outlet DN32 DN40 - Sliding Aluminium flange PN10 5 Spring 12 Locking Ring
AVD32FO-EC Gas valve fast opening DN32 360 mbar
6 Cover 13 Gasket
AVD40FO-EC Gas valve fast opening DN40 360 mbar Opening time <1 second 7 Screw 14 Connector
Closing time <1 second

Max number of operations 20 per minute

CPI-2 Control position indicator
Incorporated AISI 303 steel mesh filter on request

Supply voltage 230V (-15%+10%) 50-60Hz

Power 37W
Coils to class F copper wire class H

Use Non – aggressive gases – Family 1 – 2 – 3 and air

155 mm
245 mm
Test point 5 connections
Screw ¼” NPT

Working Temperature - 20 °C – 60 °C

Approval EN161

Protection degree IP65

165 mm
Materials:

Complete Body Die – Cast Aluminium Gd – AlSi12Cu - EN AB 46100

Dimension 1 ¼” 1 ½”
WEIGHT (kgs) 4,0 4,0

84 85
 AU TOMAT IC G A S VA LVE S

AUTOMATIC GAS VALVES Fast Opening / Fast Closing

DN65, DN80, DN100 – Pmax 360 mbar 12
11
14
10

8 6
7

13
2

Code Description Dimension Pmax TECHNICAL FEATURES 1 Body 8 O-Ring

2 Screw Plugs 9 Pilo
AVD65FO Gas valve fast opening DN65 360 mbar Pmax 360 mbar
3 O-Ring 10 Coil
AVD80FO Gas valve fast opening DN80 360 mbar Inlet connection Flanged – DN65 – DN80 – DN100 – PN16 4 Plunger 11 O-Ring
Outlet Flanged – DN65 – DN80 – DN100 – PN16 5 Spring 12 Locking Ring
AVD100FO Gas valve fast opening DN100 360 mbar
6 Cover 13 Gasket
Opening time <1 second 7 Screw 14 Connector
Closing time <1 second
AVD65FO-FR Gas valve fast opening Flow regulation DN65 360 mbar
Max number of operations 15 per minute
AVD80FO-FR Gas valve fast opening Flow regulation DN80 360 mbar
AVD100FO-FR Gas valve fast opening Flow regulation DN100 360 mbar Incorporated AISI 303 steel mesh filter

Supply voltage 230V (-15%+10%) 50-60Hz.

110V (-15%+10%) 50-60Hz.
CPI-3 Control position indicator DN65-DN80 24Vdc (-15%+10%) 50-60Hz
CPI-4 Control position indicator DN100
Power 230Vac
DN65 - DN80 - DN100 Peak power 400W - Maintain power 4W
Coils to class F copper wire class H

395 mm

185 mm
Use Non – aggressive gases – Family 1 – 2 – 3 and air

Test point 5 connections

Screw ¼” NPT

Working Temperature - 20 °C – 60 °C

Approval EN161
263 mm
Protection degree IP65

Materials:
Dimension DN65 DN80 DN100
Complete Body Aluminium EN AC 43100 WEIGHT (kgs) 9,6 9,6 15,8

86 87
 AU TOMAT IC G A S VA LVE S

ASSEMBLY OVERVIEW SPARE PARTS – ACCESSORIES

COIL ELECTRONIC BOARD

Code Description Model Code Description Model
12
20502719 Coil 230 Vac ½” - 3/4” – 1” 21802429 Electronic board 230 Vac ½” - 3/4” – 1”
80501589 Coil 230 Vac 1 ¼” – 1 ½” 81801620 Electronic board - 230 Vac 1 ¼” – 1 ½”
10
80501590 Coil 230 Vac 2” 81801621 Electronic board - 230 Vac 2”
11
80501591 Coil 230 Vac DN65 – DN80 81801622 Electronic board - 230 Vac DN65 – DN80
80501592 Coil 230 Vac DN100 81801623 Electronic board - 230 Vac DN100

COIL – ELECTRONIC BOARD – PLASTIC COVER

9
8 Code Description Model
18 80521593 Coil – Electronic board – Plastic cover 1 ¼” – 1 ½”
80521594 Coil – Electronic board – Plastic cover 2”

8 80521595 Coil – Electronic board – Plastic cover DN65 – DN80

6
80521596 Coil – Electronic board – Plastic cover DN100

17 1 Body CPI CONTROL POSITION INDICATOR

2 Screw Plugs
4
3 O-Ring
4 Plunger
15 5 Spring
6 Cover
13 16 7 Screw
8 O-Ring
2
14 9 Pilot
3 10 Coil
2 11 O-Ring
12 Locking Ring
2
13 Gasket
14 Locking
15 Insert
16 O-Ring
17 Washer

1
Code Description Model
CP1 – 1 Control position indicator ½” , ¾” , 1”
2 CP1 – 2 Control position indicator 1 ¼” , 1 ½” ,2”
2
CP1 – 3 Control position indicator DN65 –DN80
CP1 – 4 Control position indicator DN100

88 89
 AU TOMAT IC G A S VA LVE S

CODE DESCRIPTION AUTOMATIC VALVE ½”, ¾”, 1”

Pressure drops (mbar) Capacity Q (Nmc/h)

AV 015FO-FR-6B-110Vac
1 2 3 4 5 6

1 Automatic Valves 3 FO=Fast Opening 5 ___=360mbar

-6B =6bar

2 Dimension: 4 mod: 6 Power supply:

015 =1/2” __=without Flow Regulation ___ = 230Vac
020 =3/4” -FR=with Flow Regulation -110Vac
025= 1” -12Vac
032= 11/4” -12Vdc
040= 11/2” -24Vac
050= 2” -24Vdc
D65=DN65
D80=DN80
D100=DN100

PACKING DIMENSION
Code Packaging Dimension (LxWxH) cm Weight (Kg) Packaging
AV015FO – AV020FO – AV025FO 8x15x8 0,9 1 units
AV032FO – AV040FO 16,5x16x26 4,4 1 units
AV032FO-EC – AV040FO-EC 16,5x16x26 4,0 1 units
AV050FO 16,5x16x26 4,8 1 units
AVD32FO – AVD40FO 23,5x28,5x25 6,8 1 units
AVD32FO-EC – AVD40FO-EC 23,5x28,5x25 6,4 1 units
AVD50FO 23,5x28,5x25 7,2 1 units
AVD65FO – AVD80FO 41x22,5 9,8 1 units

Natural gas CH4 (d=0,544)

Air (d=1)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)
AVD100FO 29x26x46 16 1 units

90 91
 AU TOMAT IC G A S VA LVE S

AUTOMATIC VALVE 1 ¼”, 1 ½”, 2” AUTOMATIC VALVE DN65, DN80, DN100

Pressure drops (mbar) Capacity Q (Nmc/h)
Air (d=1)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)

Natural gas CH4 (d=0,544)

Natural gas CH4 (d=0,544)

Air (d=1)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)
92 93
 Automatic Gas Valves
AUTOMATIC GAS VALVES Fast Opening / Fast Closing p. 96
½”, ¾” and 1” – 6 bar

Automatic Gas Valves - Pmax 6 bar AUTOMATIC GAS VALVES Fast Opening / Fast Closing p. 98
1 ¼”, 1 ½” and 2” – 6 bar
›› Automatic gas solenoid valves are used for safety
and control of gas for shut-off in gas feed pipes.
Suitable for various gasses, including Natural gas,
Propane and LPG Gas solenoid valve normally closed
solenoid that open automatically when the coil is
powered and close automatically when there is no
tension.

95
 AU TOMAT IC G A S VA LVE S

AUTOMATIC GAS VALVES Fast Opening / Fast Closing 13

½”, ¾” and 1” – Pmax 6 bar 12
14

11
15

10

8
9

5
7

6
3

2
4

Code Description Dimension Pmax TECHNICAL FEATURES 1 Body 9 O-Ring

2 O-Ring 10 Coil
AV015FO-6B Gas valve fast opening ½” 6 bar Pmax 6 bar
3 Cover 11 O-Ring
AV020FO-6B Gas valve fast opening ¾” 6 bar Inlet connection - outlet Thread gas ½” ¾” and 1” - ISO 228 4 Gasket 12 Washer
DN25 - Sliding Aluminium flange PN10 5 Plunger 13 Screw M5
AV025FO-6B Gas valve fast opening 1” 6 bar
6 Spring 14 Washer
AVD025FO-6B Gas valve fast opening DN25 6 bar Opening time <1 second 7 O-Ring 15 Connector
Closing time <1 second 8 Pilot

Max number of operations 20 per minute

AV015FO-FR-6B Gas valve fast opening Flow regulation ½” 6 bar
AV020FO-FR-6B Gas valve fast opening Flow regulation ¾” 6 bar Incorporated AISI 303 steel mesh filter on request

AV025FO-FR-6B Gas valve fast opening Flow regulation 1” 6 bar Supply voltage 230V (-15%+10%) 50-60Hz
110V (-15%+10%) 50-60Hz
AVD025FO-FR-6B Gas valve fast opening Flow regulation DN25 6 bar 24Vdc (-15%+10%) 50-60Hz

Power 15 VA
CPI-1-6B Control position indicator Coils to class F copper wire class H

149 mm

68 cm
Use Non – aggressive gases – Family 1 – 2 – 3 and air

Test point 3 connections

Screw ¼” NPT

Working Temperature - 20 °C – 60 °C

Approval EN161

Protection degree IP65

98 mm

Materials:

Complete Body Die – Cast Aluminium Gd – AlSi12Cu - EN AB 46100 Dimension ½” ¾” 1”

WEIGHT (kgs) 0,8 0,8 0,8

96 97
 AU TOMAT IC G A S VA LVE S

AUTOMATIC GAS VALVES Fast Opening / Fast Closing

1 ¼”, 1 ½” and 2” – Pmax 6 bar
12
11

10
14
9

6 7
5

4 3

13

1
2

Code Description Dimension Pmax TECHNICAL FEATURES 1 Body 8 O-Ring

2 Screw Plugs 9 Pilot
AV032FO-6B Gas valve fast opening 1 ¼” 6 bar Pmax 6 bar
3 O-Ring 10 Coil
AV040FO-6B Gas valve fast opening 1 ½” 6 bar Inlet connection - outlet Thread gas 1 ¼”, 1 ½” and 2” - ISO 228 4 Plunger 11 O-Ring
DN32 DN40 DN50 - Sliding Aluminium flange PN10 5 Spring 12 Locking Ring
AV050FO-6B Gas valve fast opening 2” 6 bar
6 Cover 13 Fitting Guide
AVD32FO-6B Gas valve fast opening DN32 6 bar Opening time <1 second 7 Screw 14 Connector
Closing time <1 second
AVD40FO-6B Gas valve fast opening DN40 6 bar
Max number of operations 20 per minute
AVD50FO-6B Gas valve fast opening DN50 6 bar
Incorporated AISI 303 steel mesh filter on request

AV032FO-FR-6B Gas valve fast opening Flow regulation 1 ¼” 6 bar Supply voltage 230V (-15%+10%) 50-60Hz
110V (-15%+10%) 50-60Hz
AV040FO-FR-6B Gas valve fast opening Flow regulation 1 ½” 6 bar 24Vdc (-15%+10%) 50-60Hz
AV050FO-FR-6B Gas valve fast opening Flow regulation 2” 6 bar
Power 230Vac1
AVD32FO-FR-6B Gas valve fast opening Flow regulation DN32 6 bar 1/4"-11/2"-PeakPower 40W-Maintain power 4W

245 mm

155 cm
2"-Peakpower 130W- Maintain power 1,5W
AVD40FO-FR-6B Gas valve fast opening Flow regulation DN40 6 bar Coils to class F copper wire class H
AVD50FO-FR-6B Gas valve fast opening Flow regulation DN50 6 bar Use Non – aggressive gases – Family 1 – 2 – 3 and air

Test point 5 connections

CPI-2-6B Control position indicator Screw ¼” NPT

Working Temperature - 20 °C – 60 °C
165 mm
Approval EN161

Protection degree IP65

Materials:
Dimension 1 ¼” 1 ½” 2”
Complete Body Die – Cast Aluminium Gd – AlSi12Cu - EN AB 46100 WEIGHT (kgs) 4,2 4,2 4,6

98 99
 AU TOMAT IC G A S VA LVE S

ASSEMBLY OVERVIEW SPARE PARTS – ACCESSORIES

COIL ELECTRONIC BOARD

12
Code Description Model Code Description Model
10 20502719 Coil 230 Vac ½” - 3/4” – 1” 21802429 Electronic board 230 Vac ½” - 3/4” – 1”
11
80501589 Coil 230 Vac 1 ¼” – 1 ½” 81801620 Electronic board - 230 Vac 1 ¼” – 1 ½”
80501590 Coil 230 Vac 2” 81801621 Electronic board - 230 Vac 2”

COIL – ELECTRONIC BOARD

Code Description Model
9
8 80521593 Coil – Electronic board – Plastic cover 1 ¼” – 1 ½”
80521594 Coil – Electronic board – Plastic cover 2”

1 Body
4
2 Screw Plugs CPI - CONTROL POSITION INDICATOR
13 3 O-Ring
4 Plunger
5 Spring
6 Cover
2 7 Screw
8 O-Ring
9 Pilot
3 10 Coil
2 11 O-Ring
12 Locking Ring
13 Fitting Guide

1 Code Description Model

2 CP1 – 1 – 6B Control position indicator ½” , ¾” , 1”

CP1 – 2 – 6B Control position indicator 1 ¼” , 1 ½” ,2”
2

100 101
 AU TOMAT IC G A S VA LVE S

AUTOMATIC VALVE ½”, ¾”, 1” AUTOMATIC VALVE 1 ¼”, 1 ½”, 2”

Capacity Q (Nmc/h) Pressure drops (mbar) Pressure drops (mbar) Capacity Q (Nmc/h)
Air (d=1)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)

Natural gas CH4 (d=0,544)

Natural gas CH4 (d=0,544)

Air (d=1)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)
102 103
 Normally open Vent valves
AUTOMATIC GAS VALVES - NORMALLY OPEN - VENT VALVE p. 106
½”, ¾” and 1” – 360 mbar – 6 bar

Automatic gas valves -

Normally open - Vent valves
›› Normally open solenoid valve is an automatic
pressure relief valve for gas burners and gas
appliances. The normally open gas solenoid valve is a
safety device which quickly intercepts gas flow when
the pressure it is monitoring reaches a pre-set limit
due to any anomaly in the system

105
 AU TOMAT IC G A S VA LVE S

AUTOMATIC GAS VALVES - Normally Open - Vent valve AUTOMATIC VALVE ½”, ¾”, 1”
½”, ¾” and 1” – 360 mbar – Pmax 6 bar Pressure drops (mbar) Capacity Q (Nmc/h)

Code Description Dimension Pmax TECHNICAL FEATURES

AV015NO Gas valve fast opening ½” 360 mbar Pmax 360 mbar - 6 bar

AV020NO Gas valve fast opening ¾” 360 mbar Inlet connection Thread gas ½” ¾” and 1” - ISO 228
AV025NO Gas valve fast opening 1” 360 mbar - outlet DN25 - Sliding Aluminium flange PN10

AVD25NO Gas valve fast opening DN25 360 mbar Opening time <1 second
Closing time <1 second

Max number of operations 20 per minute

AV015NO - 6B Gas valve fast opening ½” 6 bar
AV020NO - 6B Gas valve fast opening ¾” 6 bar Incorporated AISI 303 steel mesh filter on request

AV025NO - 6B Gas valve fast opening 1” 6 bar Supply voltage 230V (-15%+10%) 50-60Hz
110V (-15%+10%) 50-60Hz
AVD25NO - 6B Gas valve fast opening DN25 6 bar 24Vdc (-15%+10%) 50-60Hz

Power 15 VA
Coils to class F copper wire class H

Use Non – aggressive gases – Family 1 – 2 – 3 and air

Test point 3 connections

Screw ¼” NPT

Working Temperature - 20 °C – 60 °C

Approval EN161

Natural gas CH4 (d=0,544)

Air (d=1)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)
Protection degree IP65

Materials:

Complete Body Die – Cast Aluminium Gd – AlSi12Cu - EN AB 46100

106 107
 Relief Valves
RELIEF VALVE p. 110
½” - ¾” - 1”

Relief Valves RELIEF VALVE p. 112

1 ¼” - 1 ½” - 2

›› This is a safety device which quickly intercepts

gas flow when the pressure it is monitoring reaches a
pre-set limit due to any anomaly in the system

109
 RELIEF VA LVE S

RELIEF VALVE ½” , ¾” , 1” - Pmax 1 Bar

1
2

3
4

6 7
8 9

10
11

14 12

13
15

16

Code Description Dimension Pmax TECHNICAL FEATURES 1 Seal cap 9 Plastic Washer
2 O ring 10 Safety diaphragm
RV015- 1B Relief valve ½” 1 bar Pmax 1 bar
3 Spring compressor 11 Calibrated nozzle
RV020- 1B Relief valve ¾” 1 bar Inlet - Outlet thread ½” , ¾” , 1” ISO228/1 4 Washer 12 Washer
Connection DN25 - Sliding Aluminium flange PN10 5 Spring 13 Disc
RV025- 1B Relief valve 1” 1 bar
6 Screws 14 Compensation diaphragm
RVD25- 1B Relief valve DN25 1 bar Setting range 20 - 600 mbar - Standar spring supplied 200 - 600 mbar 7 Vent cap 15 Obtuator
8 Upper cover 16 Upper bush
Screw Plugs 1/8"

Working Temperature - 20 °C - + 60°C

Use Not aggressive gases of three families – Natural gas – LPG –

Town gas – Air

Materials:

Complete Body Die - Cast Aluminium Gd - AlSi12Cu - EN AB 46100

101 mm
156 mm
Diaphragms NBR 60Sh - DvGW EN 549

72 mm
Code: Color Range mbar

SPBK1-1RV Black 20 - 120 mbar

SPG1-1RV Green 100 - 450 mbar Dimension ½” ¾” 1”
SPBR1 - 1RV Brown 200 - 600 mbar WEIGHT (kgs) 0,6 0,6 0,6

110 111
 RELIEF VA LVE S

RELIEF VALVE 1 ¼” , 1 ½” , 2” - Pmax 1 Bar

1

2
3

4 5
6
7
8
10
9

11
12

13
14

15

18
16
17

19

Code Description Dimension Pmax TECHNICAL FEATURES 1 Body 10 Nut

2 Screw plugs 11 Safety diaphragm
RV032- 1B Relief valve 1 ¼” 1 bar Pmax 1 bar
3 O ring 12 Washer
RV040- 1B Relief valve 1 ½” 1 bar Inlet - Outlet thread 1 ¼” , 1 ½” , 2” ISO228/1 4 Gasker 13 Upper cover
Connection DN32 /DN40/DN50- Sliding Aluminium flange PN10 5 Shaft 14 Safety vent
RV050- 1B Relief valve 2” 1 bar
6 Flange adapter 15 Spring
RVD32- 1B Relief valve DN32 1 bar Setting range 20 - 600 mbar - Standar spring supplied 200 - 600 mbar 7 Screw 16 Spring compressor
8 Compensation Diaphragm 17 O ring
RV040- 1B Relief valve DN40 1 bar Screw Plugs 1/8"
9 Disc 18 Seal cap
RV050- 1B Relief valve DN50 1 bar Working Temperature - 20 °C - + 60°C

Use Not aggressive gases of three families – Natural gas – LPG –

Town gas – Air

Materials:

270 mm

197 mm
Complete Body Die - Cast Aluminium Gd - AlSi12Cu - EN AB 46100

Diaphragms NBR 60Sh - DvGW EN 549

164 mm
Code: Color Range mbar

SPBK1-1RV Black 20 - 120 mbar Dimension 1 ¼” 1 ½” 2”

SPG1-1RV Green 200 - 600 mbar
WEIGHT (kgs) 3,4 3,4 3,4

112 113
 RELIEF VA LVE S

ASSEMBLY OVERVIEW CODE DESCRIPTION

17 18

RV015-1B
16

1 2 3
Relief Valve Dimension: bar:
14 15 015 = 1/2” -1B = 1bar
020 = 3/4”
RV = Threaded connections 025 = 1”
RVD = Flanged connections 25 = DN25
032 = 1 1/4 ”
32 = DN32
040 = 1 1/2 ”
7 40 = DN40
050 = 2”

12

13

10 1 Body
2 Screw plugs
11 3 O ring
4 Gasker
7 9 5 Shaft
6 Flange adapter
8
8 7 Screw
8 Compensation Diaphragm
9 Disc
10 Nut
11 Safety diaphragm PACKING DIMENSION
12 Washer
4 13 Upper cover
5 14 Safety vent Code Packaging Dimension (LxWxH) cm Weight (Kg) Packaging
15 Spring RV015 -1B – RV0201B –RV025-1B 12x12x16 0,7 1 units
16 Spring compressor RV032-1B – RV040-1B –RV050-1B 23,5x28,5x24 3,8 1 units
3 17 O ring
18 Seal cap RVD32-1B – RVD40-1B – RVD50-1B 27x28x32 6,0 1 units

1 2

114 115
 Gas Solenoid Valves manual resett
GAS SOLENOID VALVE - Manual reset - Normally open - 550 mbar p. 118
½” - ¾” - 1” - 1 ¼” - 1 ½” - 2

Gas solenoid valves manual reset GAS SOLENOID VALVE - Manual reset - Normally open - 550 mbar p. 120
DN65 - DN80 - DN100
- Normally open
GAS SOLENOID VALVE - Manual reset - Normally open - 6 bar p. 122
›› GAS Solenoid Valves have been designed to be ½” - ¾” - 1” - 1 ¼” - 1 ½” - 2”
combined with any gas detection system. Shut off the
main outlet when an emergency situation is detected. GAS SOLENOID VALVE - Manual reset - Normally open - 6 bar p. 124
DN65 - DN80 - DN100
They have been installed at the gas piping and
connected with a gas detector. Interrupt the gas flow
in a danger situation.
The electro-valve is normally located after a filter,
upstream of the regulation apparatus and preferably
outside the measurement zone. It has been installed
with the arrow stamped on the body turned towards
the user appliance.

117
 G A S S OL E NOID VA LVE S

GAS SOLENOID VALVE - Manual reset - Normally open - 550 mbar -

½” - ¾” - 1” - 1 ¼” - 1 ½” - 2
1

2 5

3 6

Code Description Dimension Type Pmax TECHNICAL FEATURES 1 Reset knob

2 Magnetic shaft
VR500 Manual solenoid valve ½” NO 550 mbar Power supply 230 Vac – 24 Vcc/Vac – 12 Vcc/Vac 3 Coil
VR510 Manual solenoid valve ¾” NO 550 mbar 4 Shaft
Body Brass ST-CW617N – EN 12420 – Yellow Painted
5 Upper body
VR520 Manual solenoid valve 1” NO 550 mbar
Working temperature -15°C / +70°C 6 Spring
VR530 Manual solenoid valve 1 ¼” NO 550 mbar 7 Obturator
Closing time < 1 sec 8 Body
VR540 Manual solenoid valve 1 ½” NO 550 mbar
VR550 Manual solenoid valve 2” NO 550 mbar Max. pressure 550 mbar

Protection level IP65

Connections Thread ½”, ¾”, 1", 1" ¼, 1" ½”, 2" - ISO 228/1 Threads

Dimension Flow Power A B Approvals Power

(mc/H) (mm) (mm) supply

½” 4,5 19 W 65 125 Dir. 97/23/CE (PED) 12Vcc

½” 4,5 17 VA 65 125 Dir. 97/23/CE (PED) 230Vac
¾” 6 19 W 65 125 Dir. 97/23/CE (PED) 12Vcc
¾” 6 17 W 65 125 Dir. 97/23/CE (PED) 230Vac B
1” 13 19 W 78 130 Dir. 97/23/CE (PED) 12Vcc
1” 13 17 VA 78 174 Dir. 97/23/CE (PED) 230Vac
1” ¼ 40 19 W 114 174 Dir. 97/23/CE (PED) 12Vcc
1” ¼ 40 17 VA 114 174 Dir. 97/23/CE (PED) 230Vac
1” ½ 50 19 W 114 174 Dir. 97/23/CE (PED) 12Vcc
1” ½ 50 17 VA 114 174 Dir. 97/23/CE (PED) 230Vac
2” 80 19 W 139 182 Dir. 97/23/CE (PED) 12Vcc A
2” 80 17 VA 139 182 Dir. 97/23/CE (PED) 230Vac
118 119
 G A S S OL E NOID VA LVE S

GAS SOLENOID VALVE - Manual reset - Normally open - 550 mbar -

DN65 - DN80 - DN100
1

3
5
4

Code Description Dimension Type Pmax TECHNICAL FEATURES 1 Reset knob

2 Coil
VR560 Manual solenoid valve DN65 NO 550 mbar Power supply 230 Vac – 24 Vac – 12 Vac 3 Magnetic shaft
VR570 Manual solenoid valve DN80 NO 550 mbar 4 Shaft
Body Aluminium EN AC 43100
5 Upper body
VR580 Manual solenoid valve DN100 NO 550 mbar
Working temperature -15°C / +70°C 6 Spring
7 Obturator
Closing time < 1 sec 8 Body

Max. pressure 550 mbar

Protection level IP65

Connections flanged UNI 2223 - PN16

Dimension Flow Power A B Approvals Power

(mc/H) (mm) (mm) supply

DN65 2” ½ 170 19 W 246 395 Dir.97/23/CE (PED) 12Vcc

DN65 2” ½ 170 17 VA 246 395 Dir.97/23/CE (PED) 230Vac

DN80 3” 170 19 W 265 395 Dir.97/23/CE (PED) 12Vcc

B
DN80 3” 170 17 VA 265 395 Dir.97/23/CE (PED) 230Vac

DN100 4” 280 19 W 265 420 Dir.97/23/CE (PED) 12Vcc

DN100 4” 280 17 VA 265 420 Dir.97/23/CE (PED) 230Vac

120 121
 G A S S OL E NOID VA LVE S

GAS SOLENOID VALVE - Manual reset - Normally open - 6 bar -

½” - ¾” - 1” - 1 ¼” - 1 ½” - 2”

4
2

5
3

Code Description Dimension Type Pmax TECHNICAL FEATURES 1 Coil

2 Magnetic shaft
VR929 Manual solenoid valve ½” NO 6 bar Power supply 230 Vca – 24 Vcc/Vca – 12 Vcc/Vca 3 Shaft
VR930 Manual solenoid valve ¾” NO 6 bar 4 Upper body
Body Brass ST-CW617N – EN 12420 – Yellow Painted
5 Spring
VR932 Manual solenoid valve 1” NO 6 bar
Working temperature -15°C / +70°C 6 Obturator
VR933 Manual solenoid valve 1 ¼” NO 6 bar 7 Body
Closing time < 1 sec 8 Reset knob
VR934 Manual solenoid valve 1 ½” NO 6 bar
VR935 Manual solenoid valve 2” NO 6 bar Max. pressure 6 bar

Protection level IP65

Connections Thread 1/2", 3/4", 1", 1" 1/4, 1" 1/2", 2" - ISO 228/1 Threads

Dimension Flow Power A B Approvals Power

(mc/H) (mm) (mm) supply

½” 4,5 19 W 65 165 Dir. 97/23/CE (PED) 12Vcc

½” 4,5 17 VA 65 165 Dir. 97/23/CE (PED) 230Vac
¾” 6 19 W 65 165 Dir. 97/23/CE (PED) 12Vcc
¾” 6 17 VA 65 165 Dir. 97/23/CE (PED) 230Vac
1” 13 19 W 78 170 Dir. 97/23/CE (PED) 12Vcc B
1” 13 17 VA 78 170 Dir. 97/23/CE (PED) 230Vac
1”¼ 40 19 W 114 195 Dir. 97/23/CE (PED) 12Vcc
1”¼ 40 17 VA 114 195 Dir. 97/23/CE (PED) 230Vac
1”½ 50 19 W 114 195 Dir. 97/23/CE (PED) 12Vcc
1” ½ 50 17 VA 114 195 Dir. 97/23/CE (PED) 230Vac
A
2” 80 19 W 139 200 Dir. 97/23/CE (PED) 12Vcc
2” 80 17 VA 139 200 Dir. 97/23/CE (PED) 230Vac
122 123
 G A S S OL E NOID VA LVE S

GAS SOLENOID VALVE - Manual reset - Normally open - 6 bar -

DN65 - DN80 - DN100
1

3
5
4

Code Description Dimension Type Pmax TECHNICAL FEATURES 1 Reset knob

2 Coil
VR936 Manual solenoid valve DN65 NO 6 bar Power supply 230 Vca – 24 Vcc/Vca – 12 Vcc/Vca 3 Magnetic shaft
VR937 Manual solenoid valve DN80 NO 6 bar 4 Shaft
Body Aluminium EN AC 43100
5 Upper body
VR938 Manual solenoid valve DN100 NO 6 bar
Working temperature -15°C / +70°C 6 Spring
7 Obturator
Closing time < 1 sec 8 Body

Max. pressure 6 bar

Protection level IP65

Connections flanged UNI 2223 - PN16

Dimension Flow Power A B Approvals Power

(mc/H) (mm) (mm) supply

DN65 2” ½ 170 17W 246 395 Dir.97/23/CE (PED) 230Vac

DN80 3” 170 17W 265 395 Dir.97/23/CE (PED) 230Vac

DN100 4” 280 17W 265 420 Dir.97/23/CE (PED) 230Vac

B

124 125
 G A S S OL E NOID VA LVE S

Gas solenoid valves Normally open - from ½” to 2” - Pmax 550 mbar / 6 bar Gas solenoid valves Normally open - from DN65 to DN100 - Pmax 550 mbar / 6 bar
Capacity Q (Nmc/h) Pressure drops (mbar) Pressure drops (mbar) Capacity Q (Nmc/h)
Air (d=1)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)

Natural gas CH4 (d=0,544)

Natural gas CH4 (d=0,544)

Air (d=1)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)
126 127
 Gas Solenoid Valves manual resett
GAS SOLENOID VALVE - Manual reset - Normally close - 550 mbar p. 130
½” - ¾” - 1” - 1 ¼” - 1 ½” - 2”

Gas solenoid valves manual reset GAS SOLENOID VALVE - Manual reset - Normally close - 550 mbar p. 132
DN65 - DN80 - DN100
- Normally close
GAS SOLENOID VALVE - Manual reset - Normally close - 6 bar p. 134
½” - ¾” - 1” - 1 ¼” - 1 ½” - 2"

GAS SOLENOID VALVE - Manual reset - Normally close - 6 bar p. 136

DN65 - DN80 - DN100

129
 G A S S OL E NOID VA LVE S

GAS SOLENOID VALVE - Manual reset - Normally close - 550 mbar -

½” - ¾” - 1” - 1 ¼” - 1 ½” - 2”

2
4

3
5

Code Description Dimension Type Pmax TECHNICAL FEATURES 1 Magnetic shaft

2 Coil
VR600 Manual solenoid valve ½” NC 550 mbar Power supply 230 Vca – 24 Vcc/Vca – 12 Vcc/Vca 3 Shaft
VR610 Manual solenoid valve ¾” NC 550 mbar 4 Upper body
Body Brass ST-CW617N – EN 12420 – Yellow Painted
5 Spring
VR620 Manual solenoid valve 1” NC 550 mbar
Working temperature -15°C / +70°C 6 Obturator
VR630 Manual solenoid valve 1 ¼” NC 550 mbar 7 Body
Closing time < 1 sec 8 Reset knob
VR640 Manual solenoid valve 1 ½” NC 550 mbar
VR650 Manual solenoid valve 2” NC 550 mbar Max. pressure 550 mbar

Protection level IP65

Connections Thread 1/2", 3/4", 1", 1" 1/4 , 1" 1/2", 2" - ISO 228/1 Threads

Dimension Flow Power A B Approvals Power

(mc/H) (mm) (mm) supply

½” 4,5 6W 86 165 Dir.97/23/CE-EN161 12Vcc

½” 4,5 9 VA 86 165 Dir.97/23/CE-EN161 230Vac
¾” 6 6W 86 165 Dir.97/23/CE-EN161 12Vcc
¾” 6 9 VA 86 165 Dir.97/23/CE-EN161 230Vac
1” 13 6W 93 175 Dir.97/23/CE-EN161 12Vcc B

1” 13 9 VA 93 175 Dir.97/23/CE-EN161 230Vac

1”¼ 40 6W 114 200 Dir.97/23/CE-EN161 12Vcc
1”¼ 40 9 VA 114 200 Dir.97/23/CE-EN161 230Vac
1” ½ 50 6W 114 200 Dir.97/23/CE-EN161 12Vcc
1” ½ 50 9 VA 114 200 Dir.97/23/CE-EN161 230Vac
2” 80 6W 138 210 Dir.97/23/CE-EN161 12Vcc A
2” 80 9 VA 138 210 Dir.97/23/CE-EN161 230Vac
130 131
 G A S S OL E NOID VA LVE S

GAS SOLENOID VALVE - Manual reset - Normally close - 550 mbar -

DN65 - DN80 - DN100
1

3
5
4

Code Description Dimension Type Pmax TECHNICAL FEATURES 1 Reset knob

2 Coil
VR660 Manual solenoid valve DN65 NC 550 mbar Power supply 230 Vca – 24 Vcc/Vca – 12 Vcc/Vca 3 Magnetic shaft
VR670 Manual solenoid valve DN80 NC 550 mbar 4 Shaft
Body Aluminium EN AC 43100
5 Upper body
VR680 Manual solenoid valve DN100 NC 550 mbar
Working temperature -15°C / +70°C 6 Spring
VR750 Manual solenoid valve DN125 NC 550 mbar 7 Obturator
Closing time < 1 sec 8 Body
VR751 Manual solenoid valve DN150 NC 550 mbar
Max. pressure 550 mbar

Protection level IP65

Connections Flanged UNI 2223 - PN16

Dimension Flow Power A B Approvals Power

(mc/H) (mm) (mm) supply

DN65 2” ½ 170 6W 246 395 Dir.97/23/CE-EN161 12Vcc

DN65 2” ½ 170 9 VA 246 395 Dir.97/23/CE-EN161 230Vac
DN80 3” 170 6W 265 395 Dir.97/23/CE-EN161 12Vcc
B
DN80 3” 170 9 VA 265 395 Dir.97/23/CE-EN161 230Vac
DN100 4” 280 6W 265 420 Dir.97/23/CE-EN161 12Vcc
DN100 4” 280 9 VA 265 420 Dir.97/23/CE-EN161 230Vac
DN125 5” 280 23W 445 500 Dir.97/23/CE-EN161 12Vcc
DN125 5” 280 23W 445 500 Dir.97/23/CE-EN161 230Vac
DN150 6” 280 23W 445 500 Dir.97/23/CE-EN161 12Vcc
DN150 6” 280 23W 445 500 Dir.97/23/CE-EN161 230Vac A

132 133
 G A S S OL E NOID VA LVE S

GAS SOLENOID VALVE - Manual reset - Normally close - 6 bar -

½” - ¾” - 1” - 1 ¼” - 1 ½” - 2"

2
4

3
5

Code Description Dimension Type Pmax TECHNICAL FEATURES 1 Magnetic shaft

2 Coil
VR939 Manual solenoid valve ½” NC 6 bar Power supply 230 Vca – 24 Vcc/Vca – 12 Vcc/Vca 3 Shaft
VR940 Manual solenoid valve ¾” NC 6 bar 4 Upper body
Body Brass ST-CW617N – EN 12420 – Yellow Painted
5 Spring
VR942 Manual solenoid valve 1” NC 6 bar
Working temperature -15°C / +70°C 6 Obturator
VR943 Manual solenoid valve 1 ¼” NC 6 bar 7 Body
Closing time < 1 sec 8 Reset knob
VR944 Manual solenoid valve 1 ½” NC 6 bar
VR945 Manual solenoid valve 2” NC 6 bar Max. pressure 6 bar

Protection level IP65

Connections Thread 1/2" , 3/4" , 1" , 1" 1/4 , 1" 1/2" , 2" - ISO 228/1 Threads

Dimension Flow Power A B Approvals Power

(mc/H) (mm) (mm) supply

½” 4,5 6W 86 165 Dir.97/23/CE-EN161 12Vcc

½” 4,5 9 VA 86 165 Dir.97/23/CE-EN161 230Vac
¾” 6 6W 86 165 Dir.97/23/CE-EN161 12Vcc
¾” 6 9 VA 86 165 Dir.97/23/CE-EN161 230Vac
1” 13 6W 93 175 Dir.97/23/CE-EN161 12Vcc B

1” 13 9 VA 93 175 Dir.97/23/CE-EN161 230Vac

1” ¼ 40 6W 114 200 Dir.97/23/CE-EN161 12Vcc
1” ¼ 40 9 VA 114 200 Dir.97/23/CE-EN161 230Vac
1” ½ 50 6W 114 200 Dir.97/23/CE-EN161 12Vcc
1” ½ 50 9 VA 138 210 Dir.97/23/CE-EN161 230Vac
2” 80 6W 138 210 Dir.97/23/CE-EN161 12Vcc A
2” 80 9 VA 138 210 Dir.97/23/CE-EN161 230Vac
134 135
 G A S S OL E NOID VA LVE S

GAS SOLENOID VALVE - Manual reset - Normally close - 6 bar -

DN65 - DN80 - DN100

4
1

5
2

Code Description Dimension Type Pmax TECHNICAL FEATURES 1 Magnetic shaft

2 Coil
VR946 Manual solenoid valve DN65 NC 6 bar Power supply 230 Vca – 24 Vcc/Vca – 12 Vcc/Vca 3 Shaft
VR947 Manual solenoid valve DN80 NC 6 bar 4 Reset knob
Body Aluminium EN AC 43100
5 Upper body
VR948 Manual solenoid valve DN100 NC 6 bar
Working temperature -15°C / +70°C 6 Spring
VR753 Manual solenoid valve DN125 NC 6 bar 7 Obturator
Closing time < 1 sec 8 Body
VR754 Manual solenoid valve DN150 NC 6 bar
Max. pressure 6 bar

Protection level IP65

Connections flanged UNI 2223 - PN16

Dimension Flow Power A B Approvals Power

(mc/H) (mm) (mm) supply

DN65 2” ½ 170 6W 246 395 Dir.97/23/CE-EN161 12Vcc

DN65 2” ½ 170 9 VA 246 395 Dir.97/23/CE-EN161 230Vac
DN80 3” 170 6W 265 395 Dir.97/23/CE-EN161 12Vcc
B
DN80 3” 170 9 VA 265 395 Dir.97/23/CE-EN161 230Vac
DN100 4” 280 6W 265 420 Dir.97/23/CE-EN161 12Vcc
DN100 4” 280 9 VA 265 420 Dir.97/23/CE-EN161 230Vac
DN125 5” 280 23W 445 500 Dir.97/23/CE-EN161 12Vcc
DN125 5” 280 23W 445 500 Dir.97/23/CE-EN161 230Vac
DN150 6” 280 23W 445 500 Dir.97/23/CE-EN161 12Vcc
DN150 6” 280 23W 445 500 Dir.97/23/CE-EN161 230Vac A

136 137
 G A S S OL E NOID VA LVE S

Gas solenoid valves Normally close - from ½” to 2” - Pmax 550 mbar / 6 bar Gas solenoid valves Normally close - from DN65 to DN100 - Pmax 550 mbar / 6 bar
Capacity Q (Nmc/h) Pressure drops (mbar) Pressure drops (mbar) Capacity Q (Nmc/h)
Air (d=1)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)

Natural gas CH4 (d=0,544)

Natural gas CH4 (d=0,544)

Air (d=1)

Town gas (d=0,411)

Propane C3 H8 (d=1,522)
138 139
 Gas Solenoid Valves manual resett
GAS SOLENOID VALVE - Manual reset - Normally close - 550 mbar p. 142
1 ¼” - 1 ½” - 2” - With control position - CPI

Gas solenoid valves manual reset GAS SOLENOID VALVE - Manual reset - Normally close - 550 mbar/6 bar p. 144
DN65 - DN80 - DN100 - With Control position - CPI
with CPI integrated

141
 G A S S OL E NOID VA LVE S

GAS SOLENOID VALVE - Manual reset - Normally close - 550 mbar -

1 ¼” - 1 ½” - 2” - With control position - CPI

2 7

8
3

Code Description Dimension Type Pmax TECHNICAL FEATURES 1 Coil

2 Upper body
VR423 Manual solenoid valve 1 ¼” NC 550 mbar Power supply 230 Vac – 24 Vcc/Vac – 12 Vcc/Vac 3 Obturator
VR424 Manual solenoid valve 1 ½” NC 550 mbar 4 Body
Body Brass ST-CW617N – EN 12420 – Yellow Painted
5 Magnetic sensor for position control
VR425 Manual solenoid valve 2” NC 550 mbar
Working temperature -15°C / +70°C 6 Magnetic shaft
7 Shaft
Closing time < 1 sec 8 Spring
9 Reset knob
Max. pressure 550 mbar

Protection level IP65

Connections Thread 1" 1/4 , 1" 1/2" , 2" - ISO 228/1 Threads

Dimension Flow Power A B Approvals Power

(mc/H) (mm) (mm) supply

1” ¼ 40 6W 114 200 Dir.97/23/CE-EN161 12Vcc

1” ¼ 40 9 VA 114 200 Dir.97/23/CE-EN161 230Vac

1” ½ 50 6W 114 200 Dir.97/23/CE-EN161 12Vcc

B
1” ½ 50 9 VA 114 200 Dir.97/23/CE-EN161 230Vac

2” 80 6W 138 210 Dir.97/23/CE-EN161 12Vcc

2” 80 9 VA 138 210 Dir.97/23/CE-EN161 230Vac

142 143
 G A S S OL E NOID VA LVE S

GAS SOLENOID VALVE - Manual reset - Normally close - 550 mbar / 6 bar -
DN65 - DN80 - DN100 - With Control position CPI
1 4

2 6

Code Description Dimension Type Pmax TECHNICAL FEATURES 1 Magnetic sensor for position control
2 Magnetic shaft
VR426 Manual solenoid valve DN65 NC 550 mbar Power supply 230 Vac – 24 Vcc/Vac – 12 Vcc/Vac 3 Spring
VR427 Manual solenoid valve DN80 NC 550 mbar 4 Reset knob
Body Aluminium EN AC 43100
5 Coil
VR428 Manual solenoid valve DN100 NC 550 mbar
Working temperature -15°C / +70°C 6 Upper body
VR429 Manual solenoid valve DN125 NC 550 mbar 7 Obturator
Closing time < 1 sec 8 Shaft
VR430 Manual solenoid valve DN150 NC 550 mbar
9 Body
VR486 Manual solenoid valve DN65 NC 6 bar Max. pressure 550 mbar/6bar

VR487 Manual solenoid valve DN80 NC 6 bar Protection level IP65

VR488 Manual solenoid valve DN100 NC 6 bar Connections Flanged UNI 2223- PN16
VR489 Manual solenoid valve DN125 NC 6 bar
VR490 Manual solenoid valve DN150 NC 6 bar

Dimension Flow Power A B Approvals Power

(mc/H) (mm) (mm) supply

DN65 2” ½ 170 6W 246 395 Dir.97/23/CE-EN161 12Vcc

DN65 2” ½ 170 9 VA 245 395 Dir.97/23/CE-EN161 230Vac

DN80 3” 170 6W 265 395 Dir.97/23/CE-EN161 12Vcc B

DN80 3” 170 9 VA 265 395 Dir.97/23/CE-EN161 230Vac

DN100 4” 280 6W 265 420 Dir.97/23/CE-EN161 12Vcc

DN100 4” 280 9 VA 265 420 Dir.97/23/CE-EN161 230Vac

144 145
 g reset
GAS BALL VALVE p. 148

FLANGED CAST IRON GAS BALL VALVE p. 156

Accessories for gas train
GUAGES FOR GAS WITH BOURDON SPRING p. 162

GAS GUAGE, CAPSULE PRESSURE GAUGES p. 164

noid Valves manual

›› This section is for all accessories complementry to the gas train.
ACCESSORIES FOR PRESSURE GAUGES p. 165

GAS DETECTION p. 166

Gas Solenoid
147
 G A S B A L L VA LVE

GAS BALL VALVE, FULL FLOW

5
9

8
7

Code Packing Dimension Pmax TECHNICAL FEATURES 1 Screw POS. DESCRIPTION N MATERIAL
2 Lever handle
BV008-FF 12/192 1/4" (DN 8) PN50 1 Screw 1 Zinc-plated steel Fe CB4
3 O-RIng
Model Female threads. Lever handle in steel.
BV010-FF 12/192 3/8" (DN 10) PN50 4 O-Ring 2 Lever handle 1 Zinc-plated and varnished steel Fe.P.04
5 Stem
BV015-FF 10/100 1/2" (DN 15) PN50 3 O-Ring 1 VITON®
Inlet - Outlet Female thread ISO 7/1 Rp parallel 6 End adapter
BV020-FF 8/64 3/4" (DN 20) PN40 Connection (equivalent to DIN EN 10226-1 and BS EN 10226-1) 7 Seat 4 O-Ring 1 NBR
NPT threads on request
8 Ball
5 Stem 1 Brass CW614N
9 Body
BV025-FF 6/48 1" (DN 25) PN30 Working Temperature - 20° C, + 60° C. 6 End adapter 1 Nickel-plated brass CW617N

BV032-FF 4/32 1"1/4 (DN 32) PN30 7 Seat 1 P.T.F.E.

Approval EN 331
BV040-FF 2/16 1"1/2 (DN 40) PN30 8 Ball 1 Chrome-plated brass CW617N

BV050-FF 2/14 2" (DN 50) PN25 9 Body 1 Nickel-plated brass CW617N

Materials:

Complete Body Body in nickel-plated brass.

DIMENSIONS (mm) and WEIGHT (kgs)

Dimension DN A B C D E F CH Kg/cm2 bar LBS-psi D

¼” 8 49,5 23,5 37,3 80 10 11 18 5 72,5

⁄”
38 10 52,4 24 37,3 80 10 11,4 21 5 72,5

C
CH CH
½” 15 61 30,5 48,8 88,5 15 15 25 5 72,5

¾” 20 68 37 54,8 113 20 16,3 31 5 72,5

E
1” 25 85 45,5 56,8 113 25 19,1 38 5 72,5

1” ¼ 32 99,5 58 75 138 32 21,4 47 5 72,5 F F

A
1” ½ 40 109 71 90,3 157,8 40 21,4 54 5 72,5

2” 50 130 85 97,3 157,8 50 25,7 66 5 72,5

148 149
 G A S B A L L VA LVE

GAS BALL VALVE, FULL FLOW

5
9

8
7

Code Packing Dimension Pmax TECHNICAL FEATURES 1 Screw POS. DESCRIPTION N MATERIAL
2 Lever handle
BV008-MF 12/192 1/4" (DN 8) PN50 1 Screw 1 Zinc-plated steel Fe CB4
3 O-RIng
Model Male/female threads. Lever handle in steel.
BV010-MF 12/132 3/8" (DN 10) PN50 4 O-Ring 2 Lever handle 1 Zinc-plated and varnished steel Fe.P.04
5 Stem
BV015-MF 10/100 1/2" (DN 15) PN50 3 O-Ring 1 VITON®
Inlet - Outlet Female thread ISO 7/1 Rp parallel 6 End adapter
BV020-MF 8/64 3/4" (DN 20) PN40 Connection (equivalent to DIN EN 10226-1 and BS EN 10226-1) 7 Seat 4 O-Ring 1 NBR
8 Ball
5 Stem 1 Brass CW614N
Working Temperature - 20° C, + 60° C. 9 Body
BV025-MF 6/48 1" (DN 25) PN30 6 End adapter 1 Nickel-plated brass CW617N

BV032-MF 4/24 1"1/4 (DN 32) PN30 Approval EN 331 7 Seat 1 P.T.F.E.

BV040-MF 2/16 1"1/2 (DN 40) PN30 8 Ball 1 Chrome-plated brass CW617N

BV050-MF 2/14 2" (DN 50) PN25 9 Body 1 Nickel-plated brass CW617N
Materials:

Complete Body Body in nickel-plated brass.

DIMENSIONS (mm) and WEIGHT (kgs)

Dimension DN A B C D E F CH Kg/cm2 bar LBS-psi D

¼” 8 56,9 23,5 37,3 80 8 11 18 5 72,5

⁄”
38 10 58,9 24 37,3 80 10 11,4 21 5 72,5

C
½” 15 68 30,5 48,8 88,5 15 15 25 5 72,5 CH CH

¾” 20 75,5 37 54,8 113 20 16,3 31 5 72,5

B
1” 25 90,5 45,5 56,8 113 25 19,1 38 5 72,5

E
1” ¼ 32 105 58 75 138 32 21,4 47 5 72,5
F F
1” ½ 40 115,5 71 90,3 157,8 39 21,4 54 5 72,5
A

2” 50 135,5 85 97,3 157,8 50 25,7 66 5 72,5

150 151
 G A S B A L L VA LVE

GAS BALL VALVE, FULL FLOW

1

5
8

6 9

Code Packing Dimension Pmax TECHNICAL FEATURES 1 Screw POS. DESCRIPTION N MATERIAL
2 Lever handle
BV065-FF 1/5 2"1/2 (DN 65) PN18 1 Screw 1 Zinc-plated steel Fe CB4
3 O-RIng
Model Female threads. Lever handle in aluminium.
BV080-FF 1/3 3" (DN 80) PN16 4 O-Ring 2 Lever handle 1 Aluminium
5 Stem
BV100-FF 1/2 4" (DN 100) PN14 3 O-Ring 1 VITON®
Inlet - Outlet Threads ISO 228 6 End adapter
Connection (equivalent to DIN EN ISO 228 and BS EN ISO 228) 7 Seat 4 O-Ring 1 NBR
8 Ball
5 Stem 1 Brass CW614N
Working Temperature - 20° C, + 60° C. 9 Body
6 End adapter 1 Nickel-plated brass CW617N

Approval 7 Seat 1 P.T.F.E.

8 Ball 1 Chrome-plated brass CW617N

9 Body 1 Nickel-plated brass CW617N

Materials:

Complete Body Body in nickel-plated brass.

D
DIMENSIONS (mm) and WEIGHT (kgs)
Dimension DN A B C D E F Kg/cm2 bar LBS-psi
2” ½” 65 148 122 126,75 250 65 25 18 261

C
3” 80 168 142 135,75 250 80 27,5 16 232

4” 100 204 180 153,75 250 100 30 14 203

E
B
F F
A

152 153
 G A S B A L L VA LVE

GAS BALL VALVE, FULL FLOW

1

5
8

6 9

Code Packing Dimension Pmax TECHNICAL FEATURES 1 Screw POS. DESCRIPTION N MATERIAL
2 Lever handle
BV065-MF 1/5 2"½ (DN 65) PN18 1 Screw 1 Zinc-plated steel Fe CB4
3 O-RIng
Model Male/female threads. Lever handle in aluminium.
BV080-MF 1/3 3" (DN 80) PN16 4 O-Ring 2 Lever handle 1 Aluminium
5 Stem
BV100-MF 1/2 4" (DN 100) PN14 3 O-Ring 1 VITON®
Inlet - Outlet Threads ISO 228 6 End adapter
Connection (equivalent to DIN EN ISO 228 and BS EN ISO 228) 7 Seat 4 O-Ring 1 NBR
8 Ball
5 Stem 1 Brass CW614N
Working Temperature - 20° C, + 60° C. 9 Body
6 End adapter 1 Nickel-plated brass CW617N

Approval 7 Seat 1 P.T.F.E.

8 Ball 1 Chrome-plated brass CW617N

9 Body 1 Nickel-plated brass CW617N

Materials:

Complete Body Body in nickel-plated brass.

DIMENSIONS (mm) and WEIGHT (kgs)

Dimension DN A B C D E F G Kg/cm2 bar LBS-psi
2” ½” 65 155,5 122 126,75 250 63 25 21 18 261

C
3” 80 178 142 135,75 250 74 27,5 24 16 232

4” 100 208 180 153,75 250 97 30 23 14 203

E
B
G F
A

154 155
 G A S B A L L VA LVE

Flanged cast iron gas ball valve

Integrated flange, in
accordance with ISO 5211. 3

Integrated flange, in accordance

2 4 The dynamic seal of the stem is guaranteed by a
with ISO 5211. double O-ring, even in severe working conditions.

Inside and outside epoxy coating, 1

high temperature resistant. 5 Blow-out proof stem.
Environmentally friendly, water-
based paint.

6 Seat of ball in reinforced PTFE, as temperature

changes, the torque remains constant.

7 Ball with full and straight bore, in chromed brass

or stainless steel.

Code Dimension DIMENSIONS (mm)

BVD015D ½” DN 15 20 25 32 40 50 65 80 100 125 150 200

BVD020D ¾” P 15 20 25 32 40 50 63 76 95 120 145 190

BVD025D 1” A EN 558/1-14 (ex DIN 3202 F4) 115 120 125 130 140 150 170 180 190 200 210 -

BVD032D 1 ¼” H 84 84 96 101 125 135 143 165 180 225 243 320

BVD040D 1 ½” H1 50,5 52 59 64 78,5 87 95 118 132,5 165 182,5 230

BVD050D 2” B 160 160 170 170 230 230 230 280 360 450 560 1000

BVD065D DN65 C EN1092/2 PN 16 95 105 115 140 150 165 185 200 220 250 285 340

BVD080D DN80 ISO5211 F04 F04 F04 F04 F05 F05 F05 F07 F07 F10 F10 F12
J 42 42 42 42 50 50 50 70 70 102 102 125
BVD100D DN100
n°x Ø q 4X6 4X6 4X6 4X6 4X7 4X7 4X7 4X9 4X9 4X11 4X11 4X13
BVD125D DN125
E 11,5 11,5 14,5 14,5 17,5 17,5 17,5 20 20 24,5 24,5 27
BVD150D DN150
S £ 9 £ 9 £ 11 £ 11 £ 14 £ 14 £ 14 £ 17 £ 17 £ 22 £ 22 £ 27
BVD200D DN200
POS. DESCRIPTION MATERIAL
WEIGHT (Kg)
1 Body EN GJS 400-15 / EN GJL250*, epoxy coated
2,6 3,3 4,2 5,8 7,5 9 10,5 15,5 18,5 28 38,5 93
10 B 2 Flange EN GJS 400-15 / EN GJL250*, epoxy coated
11
8 9
8
3 Ball Brass CuZn40Pb2 chrome plated / AISI 304 / AISI 316 / EN GJL250**
OPERATING TORQUE (Nm)
E

6
7 4 Ball seat Reinforced PTFE
15 15 18 18 18 20 40 70 100 180 250 600
5 Stem Brass CuZn40Pb2 / AISI 304 / AISI 316
H

5
H1

ISO5211
6 Sliding washer PTFE
n° x q
C

7 Ring Brass CuZn40Pb2 / AISI 304 / AISI 316

8 O-Ring NBR /FKM (Viton®)
8

9 Lever Carbon steel, epoxy coated

S

2 8 34 1 DN125 -150 P J
A 10 Stop plate Galvanized carbon steel
11 Spring washer Galvanized carbon steel

156 157
 G A S B A L L VA LVE

GAS BALL VALVE, FULL FLOW - FROM ½” TO 2” GAS BALL VALVE, FULL FLOW - FROM 2 ½” TO 4”

0,00145 Pressure drops

m3/h

l/min

gpm
0,01

14,5
0,1

10
1

1000
psi
0,001
0,0001

10000
0,01

0,1

1
bar

1000
0,01
0,001

0,1

10
m H2O
1

100
100
0,1

10
0,01

1000
KPa
4”
0,1

3”
1/2

100
2 ”
1

1/4
”
3/8

Flow rate
”

10
10

100
1

1/2
”
3/4

10
”
10

1”

1”

1
1/4
100

1”

10
1/2
Flow rate

10

2”

1
100

0,1
1000

KPa

0,01
100

10

0,1
100

m H2O

0,001
1000

10

0,1

0,01
bar

0,0001
10000

0,1

0,01

0,001
1000

psi

0,00145
14,5

10

0,1

0,01
l/min

m3/h
gpm

Pressure drops

158 159
 G A S B A L L VA LVE

FLANGED CAST IRON GAS BALL VALVE - FROM ½” TO DN80 FLANGED CAST IRON GAS BALL VALVE - FROM DN100 TO DN200

1000
100

mmH2O/m
10

mc/h
DN 250
1

DN 200

DN 150

1000
DN 125

DN 100

DN 15
10

DN 20

100
DN 25

DN 32

DN 40
100

DN 50

DN 65

10
DN 80
1000

1
mmH2O/m
mc/h

1000

100

10
160 161
 PRESSURE GUAGE PRESSURE GUAGE

Guages for Gas with bourdon spring - M63-M80 Guages for Gas with bourdon spring - M100

28 63

50
Ø14

11 1/$"

Code Description Connection Scale TECHNICAL FEATURES Code Description Connection Scale TECHNICAL FEATURES
GM004- 63 - BS M 63 RP IR bar ¼” 4 bar Applications Pressure gauges with red adjustable reference indicator to GM004-100 - BS M 100 RM IR bar ½” 4 bar Applications Pressure gauges with red adjustable reference indicator to
use on appliances and installations governed by I.S.P.E.S.L. use on appliances and installations governed by I.S.P.E.S.L.
GM006- 63 - BS M 63 RP IR bar ¼” 6 bar regulations, suitable for measuring the pressure of liquid and GM006-100 - BS M 100 RM IR bar ½” 6 bar regulations, suitable for measuring the pressure of liquid
gaseous fluids, provided they are not highly viscous, crystallizing and gaseous fl uids, provided they are not highly viscous,
GM010- 63 - BS M 63 RP IR bar ¼” 10 bar GM010-100 - BS M 100 RM IR bar ½” 10 bar
or corrosive to copper and tin alloys. crystallizing or corrosive to copper and tin alloys.
GM016- 63 - BS M 63 RP IR bar ¼” 16 bar GM016-100 - BS M 100 RM IR bar ½” 16 bar
Main fields - plumbing equipment and systems Main fields - plumbing equipment and systems
of application - heating systems of application - heating systems
- regulated equipment or subject to I.S.P.E.S.L. control - regulated equipment or subject to I.S.P.E.S.L. control
3∕8”
GM004- 80 - BS M 80 RP IR bar 4 bar
3∕8”
Normative - EN 837-1 2.5 precision class Normative - EN 837-1 2.5 precision class
GM006- 80 - BS M 80 RP IR bar 6 bar References - according to I.S.P.E.S.L. normative References - according to I.S.P.E.S.L. normative
3∕8” - CE 1997-23 directive (PED) - CE 1997-23 directive (PED)
GM010- 80 - BS M 80 RP IR bar 10 bar
- degree of protection IP31 according to EN 60529 - degree of protection IP31 according to EN 60529
3∕8”
GM016- 80 - BS M 80 RP IR bar 16 bar Operating limits Operating limits

Temperatures On the body of the pressure gauge -40 ÷ +70 °C Temperatures On the body of the pressure gauge -40 ÷ +70 °C
Of pressurized fl uid max 70 °C Of pressurized fluid max 70 °C

Pressure Up to 3/4 of the full scale value for static pressures Pressure Up to 3/4 of the full scale value for static pressures
Up to 2/3 of the full scale value for fl uctuating pressure Up to 2/3 of the full scale value for fl uctuating pressure
Up to the full scale value for short periods Up to the full scale value for short periods

Fluids Liquid or gaseous non-corrosive to copper alloys, not Fluids Liquid or gaseous non-corrosive to copper alloys, not
highly viscous, not crystallising highly viscous, not crystallising
Gauges not suitable for oxygen Gauges not suitable for oxygen

Construction features - shockproof ABS case Construction features - painted steel black case
- crystal clear methacrylate window - crystal clear methacrylate window
- red adjustable indicator mounted on window - red adjustable indicator mounted on window
- prepainted aluminium white dial - prepainted aluminium white dial
- black graphics - black graphics
- available two different series of graduations: - available two different series of graduations:
bar or mH2O (hydrometers) bar or mH2O (hydrometers)
- black plastic indicator - black plastic indicator
- brass coupling - brass coupling
- "C" shaped Bourdon spring in copper alloy - "C" shaped Bourdon spring in copper alloy
- movement in watch brass alloy (OT59) - movement in watch brass alloy (OT59)
- weight 128 gr - weight 242 gr

162 163
 PRESSURE GUAGE ACCESSORIES FOR PRESSURE GAUGES

Gas guage, capsule pressure gauges, bottom connection, gas-specific version, ACCESSORIES
DN 63–80–100
h D PRESSURE GAUGE HOLDER VALVES WITH STUFFING BOX
Their purpose is to isolate the pressure gauge from the rest of the system, whenever it is not necessary to check the pressure.
The model with flange is also required when the pressure gauge is installed in systems, boilers or other equipment subject to control based on I.S.P.E.S.L. standards.
Maximum permissible pressure: 10 bar

COD. FITTING MOD.

GH008 - NF G 1/4" without flange
GH010 - NF G 3/8" without flange
GH015 - NF G 1/2" without flange

GH008 - WF G 1/4" with flange

b
GH010 - WF G 3/8" with flange
q
GH015 - WF G 1/2" with flange

a G

PRESSURE GAUGE HOLDER VALVES WITH MALE THROUGH BOLT

Their purpose is to isolate the pressure gauge from the rest of the system, whenever it is not necessary to check the pressure.
Code Description Connection Scale DIMENSIONS (mm) and WEIGHT (gr)
Maximum permissible pressure: 3 bar
GM040 - 63 MP 63 RM ¼” 40 mbar MOD D G q a b h PESO/WEIGHT

GM060 - 63 MP 63 RM ¼” 60 mbar MP 63 RM 63 R¼" 14x14 11 50 31 165

COD. FITTING MOD.
GM100 - 63 MP 63 RM ¼” 100 mbar MP 80 RM 80 G 3⁄8 " 17x17 12 63 32 230
GH008 - MB G 1/4" without flange
GM160 - 63 MP 63 RM ¼” 160 mbar MP 100 RM 100 G½" 22x22 14 77 38 415
GH010 - MB G 3/8" without flange
GM250 - 63 MP 63 RM ¼” 250 mbar GH015 - MB G 1/2" without flange
GM400 - 63 MP 63 RM ¼” 400 mbar TECHNICAL FEATURES

GM600 - 63 MP 63 RM ¼” 600 mbar Applications Pressure gauges for measuring low pressures (max. 600 mbar).
Particularly suitable for combustible gases (methane, propane
and similar) or other non-corrosive to copper and tin alloys.
GM040 - 80 MP 80 RM 3∕8” 40 mbar PRESSURE GAUGE HOLDER VALVE WITH PUSHBUTTON FOR GAS
Main fields - domestic distribution systems and use of fuel gases
3∕8” of application - tests to verify pressure supply and gas usage They protect the capsule pressure gauges, keeping them isolated from the system.
GM060 - 80 MP 80 RM 60 mbar
- industrial and technical equipment To read the pressure gauge, press the valve button.
3∕8”
GM100 - 80 MP 80 RM 100 mbar
3∕8” Normative - EN 837-3
GM160 - 80 MP 80 RM 160 mbar References 1.6 precision class COD. FITTING
GM250 - 80 MP 80 RM 3∕8” 250 mbar - CE 1997-23 directive (PED) GH008 G 1/4"
- degree of protection IP31 according to EN 60529
GM400 - 80 MP 80 RM 3∕8” 400 mbar GH010 G 3/8"
3∕8”
Operating limits GH015 G 1/2"
GM600 - 80 MP 80 RM 600 mbar
Temperatures On the body of the pressure gauge -40 ÷ +70 °C
Of pressurized fl uid max 70 °C
GM040 - 100 MP 100 RM ½” 40 mbar
Pressure Up to 3/4 of the full scale value for static pressures
GM060 - 100 MP 100 RM ½” 60 mbar Up to 2/3 of the full scale value for fl uctuating pressure
Up to the full scale value for short periods PRESSURE GAUGE COILS
GM100 - 100 MP 100 RM ½” 100 mbar
In boilers and installations operating at high temperatures, they cool the fluid before it flows into the pressure gauge.
GM160 - 100 MP 100 RM ½” 160 mbar Fluids Liquid or gaseous non-corrosive to copper alloys, not highly viscous, Maximum permissible pressure: 25 bar for nickel-plated version (PN 25), 100 bar for the stainless steel version (PN 100).
not crystallising. Gauges not suitable for oxygen
GM250 - 100 MP 100 RM ½” 250 mbar
Construction - grey oven-painted steel case
GM400 - 100 MP 100 RM ½” 400 mbar
features - crystal clear methacrylate window COD. FITTING MOD.
GM600 - 100 MP 100 RM ½” 600 mbar - prepainted aluminium white dial
- black graphics GC008 G 1/4" nickel-plated
- aluminium indicator GC010 G 3/8" nickel-plated
- brass coupling
- sensitive system: GC015 G 1/2" nickel-plated
membrane in beryllium copper and brass alloy clockwork GC015-SS G 1/2" stainless steel
mechanism (OT59)
164 165
 G A S DE T EC T ION G A S DE T EC T ION

Central Unit for 1 Remote Sensor Gas detector - IP44

SE128K SE192K

Central realized with microprocessor technology and printed circuits are SMD assembled.
External gas sensor to be installed in the conform place to detect gas. IP54
• Display by the LED bar placed at the front of the device
Catalytic sensor to detect methane or LPG.
• N° 3 relays for alarm and fault
• TEST function
In spite of its low price, this sensor stands out because of its high reliability and such a IP44
Power supply: 230Vac 50-60Hz rating that makes it perfectly fit to be installed in heating plants and a number of industrial
• RESET function
appliances.
• N° 1 AUX input for electrovalves with magnetic sensor Installation: Wall
Absorption: 3,5VA
Type Sensors Output Capacity Sensors Alarm level: 10% LEL - 20% LEL - Measuring range: 0÷20% LEL Power supply: 12Vdc
SE 192KM To be connected to a remote sensor Absorption: 1W
Type Detected gas Cylinder calibration Average time Sensors
230Vac SE 192KG
SE128K Methane LPG N° 3 relays A led bar indicate the reached gas concentration Output: 4÷20 mA - Measuring range: 0÷20% LEL
3A SPDT SE 193KM SE192KM
Methane LPG BO200 5 years 5 years
SE 193KG N° 3 safety positive relay with alarm memory SE192KG Sensor: Catalytic

Central Unit for 3 Remote Sensors Gas Detector - ATEX

ATEX

SE194K SE193K

The central panels are equipped with three led bars that indicate the reached gas The article SE 193K only differs for its explosion-proof case certified by ATEX, which makes
concentration. The green led indicates fresh air, the first and second red leds indicate IP54 it fit for industrial installations where the area classification requires this type of cases. It can EXPLOSION PROOF
pollution and the third and fourth red leds indicate the switching on of the alarm relay. be equipped with an (optional) explosion-proof joint Art.-Nr. ZT163 required for the
The yellow led indicate an anomaly of the system and it operate on the fault relay. connection to the cable raceway. Such connection is made easier by coupling terminals.
Type of protection: II 2G Ex d IIC T6 - Certificazione CESI 03 ATEX 323
Power supply: 230Vac 50-60Hz 12Vcc - Installation: Wall
Type Sensors Output Capacity Sensors Absorption: 10 VA Power supply: 12Vdc
SE 192KM Alarm level: 10% LIE - 20% LEL - Measuring range: 0÷20% LEL Absorption: 1W
SE 192KG Type Detected gas Cylinder calibration Average time Sensors
N° 3 relays 230Vac
SE194K Methane LPG N° 3 safety positive relay with alarm memory for all sensors Output: 4÷20 mA - Measuring range: 0÷20% LEL
230V 3A SPDT 3A SPDT SE 193KM SE193KM
Methane LPG BO200 5 years 5 years
SE 193KG A led bar indicate the reached gas concentration;1 for each sensor SE193KG Sensor: Catalytic

166 167
 G A S DE T EC T ION G A S DE T EC T ION

Siren Safety gas kit

Standard certified
CEI EN 50194

Gas leak detector

SE301A

Piezoelectric modulated siren with flashing red light indication.

IP43
Power supply: 230Vca 50-60Hz - 12Vdc
+ Gas Kit - Gas detector + Gas solenoid valves -
Absorption: 9VA – 230V / 6W – 12Vdc
Sound intensity: 115db
Installation: Wall Solenoid valve
On request: SE301/24 with power supply 24Vdc 230Vca Normally Open

Auxiliary power supply

Standard certified
CEI EN 50194

BETA gas leak detector

replaceable sensor

PS

It consists of a power supply unit with a continuous on-charge battery

which activates only incase of a current failure.
+ Gas Kit - Gas detector + Gas solenoid valves - Beta has replaceable sensor

Type Size Current Pb battery IP40

PS 175 285x220x95 1.2 A 7 Ah
Power supply: 230Vac 50-60Hz
Solenoid valve
PS 180 285x220x95 2.5 A 7 Ah Standard battery Pb: 12Vdc, 7,2Ah
230Vca Normally Open
Housing: Metallic
PS 185 455x260x220 6A 18 Ah
Installation: Wall

168 169
 enoid Valves manual reset
MANOMETER FOR TEST GAS PIPELINES p. 172
PORTABLE GAS LEAK DETECTORS

Measurement Instruments

›› Measuremetn instrument for proper installation and

maintenance of gas appliances

Gas Solenoid
171
 ME ASUREMENT INSTRUMENTS ME ASUREMENT INSTRUMENTS

Manometer for test gas pipelines Portable gas leak detectors

PPRESSURE
RESSURE PUMP

Sensibility: 20 ppm
SE 151NM
Power supply: 4 x 1.5V (battery enclosed)

Operation range: 8hours

MA202PT PRINTER SEAL CONES The SE151NM is an ideal instrument for seek combustible gas leaks in a number of
residential, commercial and industrial applications, including gas pipeline and valve, Automatic switching off: 10min
regulator and gas meter inspection. It uses a long-life (5 years) sensor and is easy to
The system performs pressure measurements, a direct tightness test and a leak rate
Complying with Standard UNI 11137:2012 / ± 15.000 Pa operate.The SE151NM has a long, flexible neck for detecting leaks in hard-to-reach Case: 220x160x40mm
test. The MA402PT provides several methods for you to test pipelines and gas trains
REAL VALUES RANGE RESOLUTION MAXIMUM ERROR areas.Only Audible alarm if limit value is exceeded
that are filled with gas or air. The MA402PT standard leak procedure is particularly quick
and easy for the user. There is no need to disassemble a gas meter or gas train The
MA402PT uses the changes in pressure measured with and without the standard leak Differential pressure ± 15.000 Pa 1 Pa ± 1 Pa or 3% reading
to determine the leakage rate and volume in the gas line in just 10 to 15 minutes! The
serviceability check (gas safety check) meets the technical conditions of the new UNI Chimney depression ± 15.000 Pa 1 Pa ± 1 Pa or 3% reading
11137:2012. The leak test is fully automatic. In addition, the gas line to be tested is
connected to the MA402PT via just one pressure measurement hose. The pressure in
the gas line to be tested is automatically increased to 150 mbar by the measurement
system. The stabilization and measurement times correspond to UNI 11137:2012

CALCULATED VALUES PARAMETERS RANGES MEASURE PRINCIPLE

• Differential pressure
• Compensation in environment Pressure ± 15.000 Pa DMS bridge
• Calculation of plant piping volume T° air -15…100 °C Semiconductor
• Calculation of flow rate of dispersed air
• Calculation of flow rate of dispersed gas Humidity 0…100% Capacitive
Differential 0…100% Calculated
SOFTWARE DATA
• Automatic zero calibration after switching on Volume 0…100% Calculated
• Free programming of all parameters by operator
It the plant proves to require maintenance or shutdown, then leak needs
EQUIPMENT be searched, repaired and the plant tested again conforming to the
• Gate RS 232 for communication to PC Standard 7129-1. Sensibility: 20 ppm
SE 153NM
• Power feed by lithium batteries rechargeable from network
• Internal calendar and clock Power supply: Rechargeable batteries Ni-MH
• 25 measure reports tat can be stored
• Lithium batteries rechargeable Operation range: 5hours
The SE151NM is an ideal instrument for seek combustible gas leaks in a number of
PRINCIPAL PERFORMANCES PARAMETERS TO USE FOR THE CLASSIFICATION OF GAS PLANTS residential, commercial and industrial applications, including gas pipeline and valve, Recharge time: 14hours
• It reads the “maximum drop-out” regulator and gas meter inspection. It uses a long-life (5 years) sensor and is easy to
• Conversion into the different measure units (hPa, mmH2O, mmBar, Psi) possible Safe plant but
operate.The SE151NM has a long, flexible neck for detecting leaks in hard-to-reach Automatic switching off: 10min
Plant is areas, with bar LED dispaly to show relative leak sizes and a manual balance feature for
• Measuring of differential pressures Gas Family compliance maintenance Plant shutdown
• Measuring of room humidity by probe (optional SO390) required finding leaks in backgrounds where target gas is present. Dispaly LED & Audible alarm
with standards Case: 280x120x90mm
withing30 day
• Displaying of testing time if limit value is exceeded
• Temperature compensation in environment I - II Q ≤1 dm3/h 1<Q≤5 dm3/h Q>5 dm3/h
• Storing of reports which can be personalised with users’ data
III Q ≤0,4 dm3/h 0,4<Q≤2 dm3/h Q>2 dm3/h
• Operating range: 50h

172 173
 NOTE NOTES NOTE NOTES

174 175
 NOTE NOTES NOTE NOTES

176 177
 NOTE NOTES NOTE NOTES

178 179
 Our policy of continuous product improvement, the features and data shown are subject to change without notice. The images of the products and accessories are only indicative. Graphic colors of the products may differ from reality.

9584015
GECA S.r.l. Tecnocontrol S.r.l.
Via E. Fermi, 98 | 25064 Gussago (BS) | ITALY Via Miglioli, 47 | 20090 Milano | ITALY
Tel. +39 030 3730218 Tel. +39 02 26922890
Fax +39 030 3730228 Fax +39 02 2133734
E-mail: [email protected] E-mail: [email protected]
www.gecasrl.it www.tecnocontrol.it